+gas commercial hot water
DESCRIPTION
The +gas range of stainless steel, gas fired, commercial hot water systems are manufactured to provide the true commercial standard for large volume hot water delivery. G2 TECH utilise only high-end commercial components for premium performance and system longevity.TRANSCRIPT
The +gas range of stainless steel, gas fired, commercial hot water systems are manufactured to provide the true commercial standard for large volume hot water delivery. G2 TECH utilise only high-end commercial components for premium performance and system longevity.
TTypical applications include apartments, hotels, high end residential, hospitals, aged care facilities, manufacturing and process industries.
The Bosch32 and Bosch32C are the specified continuous flow hot water units on the +gas range because of their increased performance and proven because of their increased performance and proven durability in the market. With almost 60kW of power per unit and a high efficiency condensing option these commercial continuous flow hot water units are specifically designed and manufactured to meet the rigorous demands of the commercial hot water environment.
The G2 TECH +gas range come complete with a digital control thermostat; including a 60-second anti-cycling start delay with accuracy ±0.5 oC and variable temperature differential. The system is factory set at 65 oC with a maximum temperature of 80 oC
Features:
• • Variable Temperature Control• Anti Cycling Technology• Anti Frost Control• Stainless Steel Grundfos Pump • Duplex Stainless Steel Tank• Fully Clad & Insulated Pipework• External and Internal Models• • Condensing Option• Reduced Service Downtime
Secondary heat exchanger
Primary heat exchangerAnti frost heater
Flame rod
Flame rodIgnition plug
Condensate neutraliser & trapIgniter
Circuit boardMain water flow valve
Gas solenoids
Fan motorGas proportional valve unitWater flow sensorCurrent leakage safety deviceRemote controller connection terminal
Manifold
Anti frost heaterMixing valve
BOSCH 32C Inside story
External Model
Gas burner
Grundfos stainless steel pumps
Combining storage with continuous flow hot water unit/s has a number benefits as it enables the facility to stay online during service works as the pump, controller and gas unit can all be isolated. Service personnel can repair or replace components in off peak periods causing little or no downtime utilizing the stored water buffer.
InIn addition to this the reduced cycling on the continues flow unit/s resulting in longer burn times keeps the equipment operating well within its performance parameters increasing its useable life and reducing lifecycle costs. A marginal increase in capital cost is quickly recovered in reduced maintenance and facility downtime when combined withwith the long life stainless steel tank, making the +gas range the benchmark in gas fired commercial hot water
High efficiency
• Larger capacity models are available• Gas condensing upgrades available• 20 Year stainless steel cylinder warranty
+gas
All information correct at time of printing, subject to change without notice.
Model shown 2-250-315
Model 1-250-315 Model 2-250-315 Model 3-250-315
Tech data
D
C
CONTACT• 1300 428 111 | +61 3 9782 6897 | Fax: 03 9012 7814• [email protected]• www.g2tech.net.au• Factory 5 No. 30 Network Drive Carrum Downs VIC 3201• ABN:151 587 120 59
gas+