commercial gas connectors
TRANSCRIPT
COMMERCIALGAS CONNECTORS
1500 N. Western Blvd. Suite 280, Denton, TX 76207
[email protected] • 888.577.8999 • easyflexusa.com1500 N. Western Blvd. Suite 280, Denton, TX 76207
[email protected] • 888.577.8999 • easyflexusa.com
COMMERCIAL GAS CONNECTORS
STAINLESS STEEL BRAID
Our commercial gas connectors are made with corrugated 304 stainless-steel tubing with a 304 stainless-steel braided jacket over it. This braided jacket provides an extra layer of protection that keeps the gas connector from being kinked and punctured during installation, maintenance, and everyday use.
YELLOW OR BLACK PVC
Easyflex commercial gas connectors are coated with an antimicrobial PVC sheath, which is essential in a foodservice environment. This layer also protects the braided stainless steel from chemicals, dirt, and general wear and tear.
360° ROTATIONAL FITTINGS*
Fully rotational fittings are an ideal choice for movable commercial appliances. For safety and durability reasons, both fittings are designed to rotate freely when the appliance is moved, preventing the hose from twisting, or becoming deformed. * 360° rotational ends are available only on the BJ Series gas connector.
ZINC-COATED FITTINGS
All Easyflex commercial gas connectors come equipped with zinc-plated steel fittings, which are designed to fit foodservice appliances perfectly.
WARNING: This product can expose you to chemicals including Lead, Chromium (hexavalent compounds) and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Easyflex Commercial Gas Connectors are designed to work seamlessly with foodservice industry appliances.
2
COMMERCIAL GAS CONNECTORS
MOVABLE APPLIANCES GAS CONNECTOR
Yellow PVC Coating 360°
Design Certifi cations & Approvals• Connectors for Movable (Commercial) Gas Appliances - ANSI Z21.69/CSA 6.16• Quick Disconnect for Gas Appliances - ANSI Z21.41/CSA 6.9• Manual Gas Valves for Appliances - ANSI Z21.15/CSA 9.1• Swivel - UL 567_Pipe connection fi ttings for fl ammable and combustible liquids including LP gas. ANSI Z223.1/NFPA 54 National Gas Fuel Code. Cannot be used in temperatures below 32°F. For indoor use only. • All movable (commercial) gas equipment must be secured with a restraining cable.
Braided Stainless Steel
Corrugated Stainless-Steel Tube
ID (OD)
1/2” (5/8”)
24”, 36”, 48”, 60”, 72”3/4” (`1”)
1” (1-1/4”)
Tube & Braid Material Stainless Steel 304 (ASTM A240)
Coating Material Non-Flammable, Yellow PVC
Fittings Material Zinc-Plated Steel S45C
Quick Disconnect Material Brass
Swivel Material Carbon Steel
Maximum Operating Pressure 1/2 psi
Part # Fittings Lengths (-XX)
1/2” MIP x 1/2” MIP
3/4” MIP x 3/4” MIP
1” MIP x 1” MIP
EFGC-012-BJ-1010-XX
EFGC-034-BJ-1414-XX
EFGC-100-BJ-1616-XX
Series
012
ID (OD)
1/2” (5/8”)
3/4” (1”)
1” (1/4”)
72”
86,000
173,900
347,300
034
100
CONNECTOR MINIMUM FLOW CAPACITY
The above flow capacities are the minimum performance requirements per ANSI Z 21.24/CSA 6.10. EASYFLEX gas connectors exceed these minimum flow capacities requirements.
Straight Length Capacity (BTU/Hr., 0.64 SpGr., 1,000 BTU per cubic ft. at 0.5 inch W.C. pressure drop)
12”
180,000
-
-
18”
164,200
-
-
24”
150,000
290,900
581,800
30”
136,000
270,500
545,200
36”
125,000
255,900
515,900
48”
106,000
215,900
442,700
60”
93,200
197,400
398,900
SPECIFICATIONS
3
COMMERCIAL GAS CONNECTORS
COUNTERTOP APPLIANCES GAS CONNECTOR
Braided Stainless SteelYellow PVC Coating
Corrugated Stainless-Steel Tube
Design Certifi cations & Approvals• ANSI Z21.24/CSA 6.10 – Connectors for gas appliances• ANSI Z21.75/CSA 6.27 – Connectors for outdoor gas appliances• Meets requirements of ANSI Z223.1/NFPA 54 National Fuel Gas Code• For indoor/outdoor use.• Manual Gas Valves for Appliances - ANSI Z21.15/CSA 9.1
The above flow capacities are the minimum performance requirement EASYFLEX gas connectors exceed these minimum flow capacities requirements.
ID (OD)
1/2” (5/8”)24”, 36”
Part # Fittings Lengths (-XX)
EFGC-012-BJC-1010-XX 1/2” MIP x 1/2” MIP
1/2” (5/8”) EFGC-012-BJC-1011-XX 1/2” MIP x 1/2” FIP
Tube & Braid Material Stainless Steel 304 (ASTM A240)
Coating Material Non-Flammable, Yellow PVC
Fittings Material Zinc-Plated Steel S45C
Quick Disconnect Material Brass
Swivel Material Carbon Steel
Maximum Operating Pressure 1/2 psi
Series
012
ID (OD)
1/2” (5/8”)
72”
86,000
CONNECTOR MINIMUM FLOW CAPACITYStraight Length Capacity (BTU/Hr., 0.64 SpGr., 1,000 BTU per cubic ft. at 0.5 inch W.C. pressure drop)
12”
180,000
18”
164,200
24”
150,000
30”
136,000
36”
125,000
48”
106,000
60”
93,200
SPECIFICATIONS
4
COMMERCIAL GAS CONNECTORS
STATIONARY APPLIANCES GAS CONNECTOR
• ANSI Z21.24/CSA 6.10 – Connectors for gas appliances• ANSI Z21.75/CSA 6.27 – Connectors for outdoor gas appliances• Meets requirements of ANSI Z223.1/NFPA 54 National Fuel Gas Code• For indoor/outdoor use.• Manual Gas Valves for Appliances - ANSI Z21.15/CSA 9.1
Black PVC Coating Corrugated Stainless-Steel Tube
Design Certifi cations & Approvals
CONNECTOR MINIMUM FLOW CAPACITY
The above flow capacities are the minimum performance requirement EASYFLEX gas connectors exceed these minimum flow capacities requirements.
Straight Length Capacity (BTU/Hr., 0.64 Sp Gr., 1,000 BTU per cubic ft. at 0.5 inch W.C. pressure drop)
ID (OD)
1/2” (5/8”)
24”, 36”, 48”, 60”, 72”
Part # Fittings Lengths (-XX)
EFGC-012-BES-1010-XX 1/2” MIP x 1/2” MIP
1/2” (5/8”) EFGC-012-BES-1011-XX 1/2” MIP x 1/2” FIP
3/4” (1”)
3/4” (1”)
EFGC-034-BES-1010-XX 3/4” MIP x 3/4” MIP
EFGC-034-BES-1011-XX 3/4” MIP x 3/4” FIP
SPECIFICATIONS
Tube & Braid Material Stainless Steel 304 (ASTM A240)
Coating Material Non-Flammable, Black PVC
Fittings Material Zinc-Plated Steel S45C
Quick Disconnect Material Brass
Swivel Material Carbon Steel
Maximum Operating Pressure 1/2 psi
Series
012
ID (OD)
1/2” (5/8”)
72”
86,000
12”
180,000
18”
164,200
24”
150,000
30”
136,000
36”
125,000
48”
106,000
60”
93,200
034 3/4” (1”) 290,000 290,000 290,000 270,500 255,900 215,900 197,400 173,900
5
Quick Disconnect Restraining Cable Swivel Full Port Valve Elbow
COMMERCIAL GAS CONNECTORS
MOVABLE APPLIANCE KITS
(1) Quick Disconnect
(2) Elbow
(1) Restraining Cable
(1) Full Port Valve
Movable Appliances Kit 1
(1) Quick Disconnect
(2) Elbow
(1) Swivel
(1) Restraining Cable
(1) Full Port Valve
Movable Appliances Kit 2
(1) Quick Disconnect
(2) Swivel
(1) Restraining Cable
(1) Full Port Valve
Movable Appliances Kit 3
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
EFGC-FS-034-K2-24
EFGC-FS-034-K2-36
EFGC-FS-034-K2-48
EFGC-FS-034-K2-60
24”
36”
48”
60”
1” (1-1/4”OD)
1” (1-1/4”OD)
1” (1-1/4”OD)
1” (1-1/4”OD)
EFGC-FS-100-K2-24
EFGC-FS-100-K2-36
EFGC-FS-100-K2-48
EFGC-FS-100-K2-60
24”
36”
48”
60”
KIT
2
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
EFGC-FS-034-K3-24
EFGC-FS-034-K3-36
EFGC-FS-034-K3-48
EFGC-FS-034-K3-60
24”
36”
48”
60”
1” (1-1/4”OD)
1” (1-1/4”OD)
1” (1-1/4”OD)
1” (1-1/4”OD)
EFGC-FS-100-K3-24
EFGC-FS-100-K3-36
EFGC-FS-100-K3-48
EFGC-FS-100-K3-60
24”
36”
48”
60”
KIT
3
Gas Hose ID Gas Hose Part #
1/2” (5/8”OD)
1/2” (5/8”OD)
1/2” (5/8”OD)
1/2” (5/8”OD)
EFGC-FS-012-K1-24
EFGC-FS-012-K1-36
EFGC-FS-012-K1-48
EFGC-FS-012-K1-60
Length
24”
36”
48”
60”
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
EFGC-FS-034-K1-24
EFGC-FS-034-K1-36
EFGC-FS-034-K1-48
EFGC-FS-034-K1-60
24”
36”
48”
60”
1” (1-1/4”OD)
1” (1-1/4”OD)
1” (1-1/4”OD)
1” (1-1/4”OD)
EFGC-FS-100-K1-24
EFGC-FS-100-K1-36
EFGC-FS-100-K1-48
EFGC-FS-100-K1-60
24”
36”
48”
60”
KIT
1
Gas Hose ID Gas Hose Part # Length
6
360°
Full Port Valve Elbow
Full Port Valve Elbow
COMMERCIAL GAS CONNECTORS
COUNTERTOP APPLIANCE KITS
STATIONARY APPLIANCE KITS
ANSI Z21.24 / CSA 6.10ANSI Z21.75 / CSA 6.27
ANSI Z21.24 / CSA 6.10ANSI Z21.75 / CSA 6.27
(2) Elbow
(1) Full Port Valve
Countertop Appliances Kit 1
KIT
1Gas Hose ID Gas Hose Part #
1/2” (3/4”OD)
1/2” (3/4”OD)
EFGC-CC-012-K1-24
EFGC-CC-012-K1-36
Length
24”
36”
(2) Elbow
(1) Full Port Valve
Stationary Appliances Kit 1
KIT
1
Gas Hose ID Gas Hose Part # Length
1/2” (3/4”OD)
1/2” (3/4”OD)
1/2” (3/4”OD)
EFGC-CS-012-K1-24
EFGC-CS-012-K1-36
EFGC-CS-012-K1-48
24”
36”
48”
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
3/4” (1”OD)
EFGC-CS-034-K1-24
EFGC-CS-034-K1-36
EFGC-CS-034-K1-48
EFGC-CS-034-K1-60
24”
36”
48”
60”
7
1500 N. Western Blvd. Suite 280, Denton, TX 76207
[email protected] • 888.577.8999 • easyflexusa.com