Efficient, ULTRA Low-Profile

™

www.SolanaSurgical.com

SuperElasticShape-Memory for Constant

Compressive Force

End-Loaded Inserter,No Implant Handling

Sterile, Single-use Kit withImplant & Instruments

Fixation System

SuperElastic, Shape Memory Nitinol

Sterile,Single-useKit

End-Loaded,No Handling

The FuseFORCE is a shape-memory,

compression-ready fixation system that can

be used in fixation for fractures, fusions or

osteotomies of the bones in the forefoot,

midfoot and rearfoot. The compressive

properties and stepped-tooth design resists

pull-out. See the accompanying Sizing Reference

for examples of use from similar procedures.*

Sterile, Single-use Kit with Inserter and Complete Instrumentation

The FuseFORCE Fixation System is delivered

sterile with disposable corresponding instrumentation.

Its compression on release design provides a constant

compressive force. Available in a full-spectrum of

sizes from 8x8mm to 25x22mm, with leg diameters

matched to overall size. Each package contains one

each: Implant, Inserter, Reamer, Reamer Guide and

Locator Pin.

The Inserter / Implant

combo allows for No-Touch

implantation with the simple

twist-release-compress

design. The end-loaded

system provides an ULTRA

low-profile release and no

handling of the Implant

required.

SHAPE-MEMORY, COMPRESSIVE FORCE

TWIST RELEASE INSERTER

ULTRA,LOW-PROFILE

INSERTER

CONVENIENT, NO-TOUCH, TWIST RELEASE

SuperElastic, Shape-Memory Nitinol

™

2 | Solana Surgical FuseFORCE Fixation

Surgical Technique*

Determine the correct Implant size by using a standard ruler or tape measure. Open the matching size FuseFORCE Implant Kit with its corresponding Inserter, Reamer, Reamer Guide and Locator Pin.

1. While maintaining desired reduction, place Reamer Guide across the fusion site with both guides touching bone.

2. Drill the first hole to the proper depth using the laser marked Reamer provided in the Kit.

3. Insert a Locator Pin into the first hole to maintain proper reduction while the second hole is drilled. Drill second hole to the proper depth using the laser marked Reamer. Remove the Reamer, Locator Pin and Reamer Guide. Remove the Inserter / Implant assembly from the sterile Kit.

4. While maintaining reduction, align and insert the tips of the FuseFORCE into the drilled holes.

5. Tamp the FuseFORCE as flush to the bone as possible. Implant positioning may be evaluated radiographically.

6. Twist the plastic Inserter counter- clockwise (as shown by arrows on top) to release the Implant. Place the end of the Inserter on the implant and apply pressure, manually or using a mallet,to fully seat the FuseFORCE Implant.

Apply additional FuseFORCE Implants as deemed appropriate for optimum stability.

FuseFORCE Surgical Technique | 3

SuperElastic, Shape-Memory Nitinol

™

Fixation System

www.SolanaSurgical.com

*This brochure, device reference and the surgical technique outlined are furnished for informational purposes only. Each surgeon must evaluate the appropriateness of the implant and techniques based on his or her own medical training, clinical judgement and surgical experience. Proper surgical techniques and procedures are the responsibility of the medical professional. Solana Surgical cannot recommend a device or procedure that is suitable for all patients. Indications, contraindications, warnings, and precautions are listed in the implant package insert and should be reviewed by the physician and operating room personnel. © 2013 Solana Surgical LLC, Memphis, TN. All rights reserved 10371-A

Solana Surgical, LLC | 6363 Poplar Ave. | Memphis, TN 38119 TF: 855. 214. 1860 | V: 901. 818. 1860 | F: 855. 540. 1861

SuperElastic ShapeMemory Nitinol

End-Loaded Inserter,No Implant Handling

855. 214. 1860

FOREFOOT

MIDFOOT

REARFOOT

Hallux IPJ Arthrodesis | 08, 10mm

Akin Osteotomy | 08, 10mm

First MPJ Arthrodesis | 15, 18mm

Bunion Repair | 10, 12mm

Chevron Osteotomy | 12, 15mm

Base Wedge Osteotomy | 15, 18mm

Lapidus Procedure | 15, 18, 20mm

Cotton Osteotomy | 15, 18, 20mm

Jones Fracture | 08, 10mm

Naviculocuneiform Arthrodesis | 15, 18, 20mm

Lisfranc Fusion | 15, 18, 20mm

Talonavicular Arthrodesis | 15, 18, 20, 25mm

Calcaneocuboid Arthrodesis | 15, 18, 20, 25mm

Subtalar Arthrodesis | 20, 25mm

Evans Calcaneal Osteotomy | 15, 18, 20, 25mm

Ankle Fusion [Tibio/tarsal Arthrodesis] | 20, 25mm

Dwyer Osteotomy | 18, 20, 25mm

• Sterile, Disposable Implant Kit with Instrumentation• End-Loaded onto inserter [no handling required] • Simple twist-release/compress• Compression Loaded: No heat/temperature

activation required, Compression on Release• Constant Compressive Force• Efficient, ULTRA low-profile: Size matches

procedure

B

A

CATALOG NO. DESCRIPTION BRIDGE WIDTH LEG LENGTH REAMER A B SIZE

FFS-0808 FuseFORCE 8 8FFS-1010 FuseFORCE 10 10 FFS-1212 FuseFORCE 12 12FFS-1515 FuseFORCE 15 15FFS-1816 FuseFORCE 18 16 FFS-2020 FuseFORCE 20 20FFS-2522 FuseFORCE 25 22

Ordering Info

Indication Sizing Reference*

2mm

3mm

Sterile, Single-use Kit withImplant & Instruments

Implant on InserterLocation PinReamerReamer Guide