funny car display chassis - traxxas · funny car display chassis body mounting instructions the...

KC1729 120823 Covers Part #6995 Completed Installation Body Cutout Instructions www.TRAXXAS.com Traxxas, 1100 Klein Road, Plano, TX 75074, Phone: 972-265-8000, Fax: 972-265-8011, e-mail: [email protected] If you have questions or need technical assistance, call Traxxas at 1-888-TRAXXAS (1-888-872-9927) (U.S. residents only) Funny Car Display Chassis Body Mounting Instructions The body will rest on the display chassis’ exhaust pipes when lowered. To adjust the height of the body, carefully trim away the exhaust- clearance area as shown. Remove a small amount of material at a time until the body is sitting properly over the chassis. For best results, used curved scissors designed for trimming lexan bodies. Or, trace the area using a hobby knife to score it, then ﬂex the lexan and peel out the waste material. Use caution when handling a hobby knife. 1. (Skip to step 2 if you are installing a body you have purchased separately). Dismount the body from your vehicle by removing the screws that secure the body pivot to the rear subframe. 2. Install the rear of the body on the display chassis by inserting the supplied hardware through the body pivots and chassis plates, then tighten them in the plastic spacer bar. All parts contained in this model, including the wheels and tires, are for static display only. DO NOT install on running vehicles. 6995-Funny_car-Chassis-Display-Cutout.indd 1 9/6/12 11:22 AM

Upload: others

Post on 29-Dec-2019

4 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Sour

ce Fi

lenam

e: C:

\PTC

\.ww

gm\.

ws\t

rx-w

capp

.trax

xasc

orp.c

om\S

olidW

orks

Files

\Soli

dWor

ks Fi

les.SO

LIDW

ORKS

\ORC

003 D

isplay

Chas

sis Re

ar Fo

r Exp

loded

View

KC1729120823

Covers Part #6995

Completed Installation

Body Cutout Instructions

www.TRAXXAS.comTraxxas,1100KleinRoad,Plano,TX75074,Phone:972-265-8000,Fax:972-265-8011,e-mail:[email protected]

If you have questions or need

technical assistance, call Traxxas at

1-888-TRAXXAS (1-888-872-9927)(U.S.residentsonly)

Funny Car Display Chassis

Body Mounting Instructions

Thebodywillrestonthedisplaychassis’exhaustpipeswhenlowered.Toadjusttheheightofthebody,carefullytrimawaytheexhaust-clearanceareaasshown.Removeasmallamountofmaterialatatimeuntilthebodyissittingproperlyoverthechassis.

For best results, used curved scissors designed for trimming lexan bodies. Or, trace the area using a hobby knife to score it, then flex the lexan and peel out the waste material. Use caution when handling a hobby knife.

1.(Skiptostep2ifyouareinstallingabodyyouhavepurchasedseparately).Dismountthebodyfromyourvehiclebyremovingthescrewsthatsecurethebodypivottotherearsubframe.

2. Installtherearofthebodyonthedisplaychassisbyinsertingthesuppliedhardwarethroughthebodypivotsandchassisplates,thentightenthemintheplasticspacerbar.

All parts contained in this model, including the wheels and tires, are for static display only.

DO NOT install on running vehicles.

6995-Funny_car-Chassis-Display-Cutout.indd 1 9/6/12 11:22 AM