Fluid TransFer FiTTings12/08/2010

Fulcrum - Dry Break Couplings

Tank Adaptor Units(Available with thread or flange)

Application - Primarily used for the transfer of petroleum products. Used for the loading and unloading of bulk rail tankers.

�“Dry”�disconnection.�Couplings�disconnect�with�a�minimal�loss�of�product�to�the�environment.

�Ergonomic�Handles.�Cast�in�stainless�steel�to�ensure�maximum�strength.

�High�quality�materials.�Dry�breaks�are�manufactured�from�316�stainless�steel,�bronze�and�aluminium.�All�internal�parts�are�produced�in�316�stainless�steel.

�Individually�pressure�tested�to�25�Bar.�10�Bar�recommended�working�pressure.

�Integrated�360°�swivels.�All�hose�units�have�swivels�that�are�capable�of�360°�rotation.

�High�flow�rates�/�low�pressure�drops.�Allows�maximum�product�transfer�with�minimal�losses.

�Seal�Materials.�All�couplings�come�with�Viton�seals.�Most�other�materials�can�be�provided�on�request.

►

►

►

►

►

►

►

Maximum�Allowable�Working�Pressure�� 1000kPaTest�Pressure� 1500kPaMaximum�Coupling�Pressure� 400kPa

Features

Specifications

Hose Coupler Units

Page 1 of 2

Fluid TransFer FiTTings12/08/2010Head Office 25-33 Gardiner Street, Rutherford NSW, 2320 AustraliaMelbourne Warehouse 144 Hall Street, Newport VIC, 3015 Australia Treloar Group Pty Limited ABN 67 000 045 750

critical fluid solutions & services

www.treloar.com.auphone +61 2 4932 7055 fax +61 2 4934 2013

Fluid TransFer FiTTings12/08/2010

Flow GrApH NoTeS:

Medium�Used:�� WaterRelative�Density:�� 1Viscosity:�� 1.002�CentipoiseTemperature:�� 20°C

Medium�Used:�� KeroseneRelative�Density:�� 0.765Viscosity:�� 1.75�CentistokeTemperature:�� 16°C

Flow�testing�was�performed�by�an�independent�accredited�Flow�Laboratory.�Data�for�individual�couplings�are�available�on�request.�

Flow�testing�was�performed�in�accordance�with�the�TEAM�Specifications�Section�8�&�Appendix�4

Page 2 of 2

Fulcrum - Dry Break Couplings