ftc alliance group / sgi users meeting 2002 / ftc alliance group meeting
TRANSCRIPT
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FTC Alliance Group FTC Alliance Group MeetingMeeting
& SGI Users Meeting& SGI Users Meeting
Man Roland HeadquartersWestmont, IL
November 08 2002
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introductions And Introductions And WelcomeWelcome
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Welcome to the first joint Welcome to the first joint FTC Alliance Group and FTC Alliance Group and
SGI Simulator Users SGI Simulator Users Meeting since December Meeting since December
20002000For those of you who don’t
remember, it was the one affected by an ice storm in Dallas, TX.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introduction Of The SGI & Introduction Of The SGI & FTA Personnel And Their FTA Personnel And Their
RolesRoles
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introduction Of The SGI & FTA Introduction Of The SGI & FTA Personnel And Their RolesPersonnel And Their Roles
• Peter Herman– SGI President (Paris, France)
• Laurent Grimaldi– SGI Chief Technology Officer (Paris , France)
• Claude Mourey– SGI Project Leader - Diagnostic (Paris , France)
• Tom Barto– SGI Training & Technical Support (Charlotte, NC)
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introduction Of The SGI & FTA Introduction Of The SGI & FTA Personnel And Their RolesPersonnel And Their Roles
• Rick Mix– FTA Technical Director (Chicago, IL)
• John Anderson– SGI Flexo Project Manager & Project
Engineer (Pittsburgh, PA)
– FTC FlexSys™ Press Simulator Support Specialist (Pittsburgh, PA)
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Now Please Introduce YourselfNow Please Introduce Yourself
• Remember to include:– Your name!
– Company
– Simulator type or press type
– How do you use the simulator
– What do you want from this meeting?
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Review of the May 2002 Review of the May 2002 FTC Alliance Group FTC Alliance Group
MeetingMeeting
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Review of the May 2002Review of the May 2002FTC Alliance Group MeetingFTC Alliance Group Meeting
• Flexo 2002, Washington
• Discussion of simulator implementation
• Introduction to changes in version 3.0
• Extensive review of the priority list for future simulator versions
• Brief FLIPSS demonstration
• Introduced the future availability of a split simulator & trainer module
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Review of the May 2002Review of the May 2002FTC Alliance Group MeetingFTC Alliance Group Meeting
• Results from the May meeting– Updated priority list
– Request for additional training materials
– Request for separate trainer availability for existing users
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Changes To FTC Alliance Changes To FTC Alliance Group Communication And Group Communication And
SupportSupport
Introducing the significant changes in the FTC alliance group and its membership
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Changes In The Alliance Group Changes In The Alliance Group Communication And SupportCommunication And Support
• Rick Mix has taken over the responsibility for the alliance group
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Changes In The Alliance Group Changes In The Alliance Group Communication And SupportCommunication And Support
• November 01 2002, Dr John Anderson became the “FTC FlexSys™ press simulator support specialist”
• JA will be responsible for:– Alliance group member technical & troubleshooting
support– Primary train-the-trainer provider– Development of new training materials– Development of additional support materials
• More details later
Tel: 412-207-4918 Email: [email protected]
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Changes In The Alliance Group Changes In The Alliance Group Communication And SupportCommunication And Support
• This change simplifies communications between FTC, SGI, and all simulator users
• Provides FTC Alliance members with “expert”, US based support
• Allows FTC members to benefit from support items & training, developed exclusively for them.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Product Update & NewsProduct Update & News
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Update On FlexSys™ Version 3.0Update On FlexSys™ Version 3.0
• FLIPSS replaces TSM as the support and diagnostic system– FLIPSS has 2 levels of functionality
• Consultation Mode – [Users Only]
• Customization Mode – [Administrators Only]
–This package is a very significant enhancement to the previous TSM module by allowing customization
–Demonstration will follow by Claude Mourey
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Update On FlexSys™ Version 3.0Update On FlexSys™ Version 3.0
• 70+ of the high priority issues have been solved, these mainly considered– Copydesk and its functions
– Print fault images and their visualization
– Trainer interface and its functions
– Import/Export options
• Plus additional programmed functionality
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Update On FlexSys™ Version 3.0Update On FlexSys™ Version 3.0
• Tutorials have been added to introduce the simulator to new and existing users– Reducing the demands on the administrator– Increasing the “self-training” functionality
• Improved installation system– Single group of operations– Set your own trainers module password
• Demo of how to change the password
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Update On FlexSys™ Version 3.0Update On FlexSys™ Version 3.0
• Increased list of pressroom faults that would be visually identifiable are now indicated by a “red dot”
• Incorporation of the support documentation for direct access
• Realistic web viewer is fully functional
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
New Branding Of The New Branding Of The FlexSys™ Press SimulatorFlexSys™ Press Simulator
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
New Branding Of The New Branding Of The FlexSys™ SimulatorFlexSys™ Simulator
• At the alliance meeting in May 2002, the concept of a split version of the simulator was introduced– This was to allow separate software protection
keys for both simulator and trainer• This change was received very favorably
• However, since the Forum this concept has been significantly extended:
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
New Branding Of The New Branding Of The FlexSys™ SimulatorFlexSys™ Simulator
• Instead of 2 levels of split functionality, there are now 3 levels available.
• These have been branded as follows:– FlexSys™ Lite Simulator– FlexSys™ Standard Simulator– FlexSys™ Professional Simulator
• Alliance members all have the professional version
– The details of each are:
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
New Simulator Branding:New Simulator Branding:FlexSys™ FlexSys™ LiteLite Simulator Simulator
• Entry Level Simulator– Simplified press with reduced functionality– Single Press/Ink/Substrate combination– 50 Exercises (1 to 3 situations in each)
• Users Workbook (introduces the simulator & exercises)• Administrators Support Manual (exercise answers)
– 2 Interview Exercises & Guidelines– FLIPSS – Consultation Mode [User Only]
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
New Simulator Branding: New Simulator Branding: FlexSys™ FlexSys™ StandardStandard Simulator Simulator
• Fully functional simulator– Fully functional press
– Full range of inks & substrates
– 100+ Preset training exercises
– One set of “Lite” simulator exercises & support materials
– FLIPSS – Consultation Mode [User Only]
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
New Simulator Branding: New Simulator Branding: FlexSys™ FlexSys™ ProfessionalProfessional Simulator Simulator
• FlexSys™ Standard Simulator Plus– Trainer Module
• Creation of new training materials• Allows customization of the press, settings, materials,
specifications, etc.
– Print Job Generator• Add your own print jobs to the simulator
– FLIPSS – Consultation Mode [User Only]
– FLIPSS – Customization Mode [Administrator Only]
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FlexSys™ Professional SimulatorSingle Dongle (Current)
Standard Simulator
FLIPSS Consultation
FLIPSS Customization
Trainer Customization
Option 1 – Single Security KeyOption 1 – Single Security Key
Current Situation
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FlexSys™ Professional Simulator
Dongle #2 (Trainer)
FLIPSS Consultation
Trainer Customization
Additional Security Key Cost: Non-FTA Members - $500
FTA Members - $400
FlexSys™ Professional Simulator
Dongle #1 (User)
Standard Simulator
FLIPSS Customization
FLIPSS Consultation
Option 2 – Separate Trainer Option 2 – Separate Trainer ModuleModule
Existing SimulatorSystems
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
This Is The Official Announcement Of The Product Release.
November 08 2002
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What is the FlexSys™ “Lite” Simulator?– Entry Level Simulator– Training Only– Targets & Enables Users “Self-Training”
• Using a user workbook• Introduction to the simulator via the workbook
– Introduction supported by the “Tutorial”• 50 progressive exercises
– Objective! Develop printing understanding & experience to achieve commercially acceptable print quality
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What is the FlexSys™ “Lite” Simulator?– Minimized system “Administrator” support
demands• Introductions to the simulator supported by the
workbook and tutorial• Administrators Support Document
– Graphical display/information for each exercise» Showing the initial image» Each problem set in turn» The solution with other issues
• Administrator does NOT need to be a simulator expert to provide sufficient user support
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What is the FlexSys™ “Lite” Simulator?– 2 Interview Exercises
• Each exercise has 5 mechanical biased print problems – (register, dirty anilox, plate mark, etc)
– The administrator runs the simulator, with the interviewee directing the actions
• Increases familiarity to relax printers• Evaluate the true knowledge of the interviewee• Reduce the risk of getting the wrong person• Use as an interview tool
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What is the FlexSys™ “Lite” Simulator?– Consultation Mode FLIPSS Included
• Providing additional user support to solve exercises
• Reference source for Flexo terms, components, faults.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Each press type is simplified, to include just the
materials and components needed– The print units are fully functional– Other ancillary (pre & post print) components are
not available– The press is controlled from the print units
• The central control console only has the drive panel
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Press
• CI
– Ink Type• Solvent Based, Water Based
– Substrate Type• Paper, Film, Foil
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Press
• CS: Top, Bottom, or Combination Printer
– Ink Type• Water Based
– Substrate Type• Corrugated
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Press
• IL
– Ink Type• UV Cured, Solvent Based, Water Based
– Substrate Type• Paper, Film
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Already completed and NOW available are:
• IL / UV Cured / Paper• IL / Water Based / Paper
– Final testing/proofing and available mid November:• CI / Solvent Based / Film
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Next for development to be available by the End
of November are:• CI / Water Based / Paper• CS Top / Water Based / Corrugated
– Planned for availability by the end of December:• IL / Solvent Based / Film• CS Bottom / Water Based / Corrugated• CI / Solvent Based / Foil
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What Press/Ink/Substrate combinations are available?– Planned for availability by the Spring 2003:
• 7 further US English combinations, to total 15• 15 Metric versions will then be added• Other combinations will be built if the demand
is present
– Please let us know what is the most applicable combinations to your company!
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• Note! Initial release versions of the FlexSys™ “Lite” simulator, although complete, will be treated as “beta” versions for the overall FlexSys™ simulator.
• ONLY following industry testing and inclusion of any corrections will the 30+ versions be added to the standard and professional FlexSys™ simulator
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• Subscribed FTC Alliance members who wish to participate in the beta testing will:– Benefit from access to their relevant beta
combination as soon as it is available– Provide feedback and direct input to improve the
combination where necessary– Receive intermediate updates if significant
changes are applied– Receive the final version with a future update of
the FlexSys™ installation CD
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• Subscribed FTC Alliance members who do NOT wish to participate in the beta testing will:– Receive the final version as an intermediate
update, once all beta testing and any changes are applied
• Expected at 3 to 6 months after first beta release– Receive the final version with a future update of
the FlexSys™ installation CD
– Discuss in more detail this afternoon
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Introducing The Introducing The FlexSys™ “Lite” SimulatorFlexSys™ “Lite” Simulator
• What is the FlexSys™ “Lite” Simulator?– Training Ready Out Of The Box
• Once installed on a PC the “Lite” simulators need no training prior to use, just use the users workbook
• Each users gets a copy of the workbook– Supplied as a digital copy for local printing &
distribution• Workbook acts as a future reference source for users
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Distribution Of Distribution Of “Lite” Training Materials“Lite” Training Materials
• For each “Lite” Press/Ink/Substrate combination there are:– 50 exercises
– Administrators support (exercise answers)
– Users workbook
• Distributed to subscribed FTC alliance group members in digital format
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Distribution Of Distribution Of “Lite” Training Materials“Lite” Training Materials
• Current FTC Alliance group members will receive– One digital copy of the training materials,
administrators support and users workbook
– Choose the combination most applicable to your company• As a beta version for testing (feedback needed)• And/Or once fully tested and released
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Distribution Of Distribution Of “Lite” Training Materials“Lite” Training Materials
• “Lite” training materials will be in a future upgrade of FlexSys™ Press Simulator
• BUT only once:– ALL press/ink/substrate combinations are
completed and released– An languages are completed– Alliance members exclusive benefit period
in the US is completed
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FLIPSS DemonstrationFLIPSS DemonstrationBy Claude MoureyBy Claude Mourey
FLexographic Integrated Process Support System
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FLIPSS DemonstrationFLIPSS Demonstration
• Claude Mourey– Claude is the SGI Project Leader -
Diagnostic and responsible for all of the IPSS projects
– Claude is responsible for the FLIPSS product and its development• Please ask lots of questions
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FLIPSS AnnouncementFLIPSS Announcement
• Announcing the availability of the “Consultation Only” FLIPSS– Non-FTA Member $1500
– FTA Member $1250
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FLIPSS AnnouncementFLIPSS Announcement
• FLIPSS package:– 1 Customization FLIPSS & 2 Consultation
FLIPSS• $5500 non-FTA members• $5000 FTA members
– Each supplemental Consultation unit• $1250 non-FTA members• $1000 FTA members
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Open Discussions And Open Discussions And Practical SessionPractical Session
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Open Discussions And Practical Open Discussions And Practical SessionSession
• We have introduced many points this morning.
• Now it is your turn– This is an open session to ask questions
– Then try the newest versions for yourself• Please make the most of support from all of the
SGI & FTC specialists present
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Lunch TimeLunch Time
Please feel free to continue discussions and practice with the
systems available
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Summary Of The Changes Summary Of The Changes For The FlexSys™ Press For The FlexSys™ Press
Simulator & FLIPSS In 2002Simulator & FLIPSS In 2002
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
January 2002January 2002
FlexSys™Simulator
Version 2.5 Available
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
March 2002March 2002
FlexSys™Simulator
FLIPSS
Version 2.5 Available
Released As A NEWSeparate Product
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
July 2002July 2002
FlexSys™Simulator
FLIPSS
NEW Version 3.0 Released
Available As Separate Product
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
October 2002October 2002
FlexSys™ ProfessionalSimulator
FLIPSSCustomization
FlexSys™ StandardSimulator
NEW NameVersion 3.0 Available
Available As Separate Product
NEW Separate ProductVersion 3.0 Available
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
November 2002November 2002
FlexSys™ ProfessionalSimulator
Version 3.0 Available
FLIPSSCustomization
Available As Separate Product
FlexSys™ StandardSimulator
Version 3.0 Available
FlexSys™ Lite Simulator
Announced & AvailableAs A New Product
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
November 2002November 2002
FlexSys™ ProfessionalSimulator
Version 3.0 Available
FLIPSSCustomization
Available As Separate Product
FlexSys™ StandardSimulator
Version 3.0 Available
FlexSys™ Lite Simulator
Announced & AvailableAs A New Product
FLIPSSConsultation
Available As A NEWSeparate Product
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
December 2002December 2002
FlexSys™ ProfessionalSimulator
Version 3.0 Available
FLIPSSCustomization
Available As Separate Product
FlexSys™ StandardSimulator
Version 3.0 Available
FlexSys™ Lite Simulator
First (8) CombinationsAvailable
FLIPSSConsultation
Available As ASeparate Product
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Actions For 2003 ?Actions For 2003 ?
• Completion of 15 US English “Lite” versions.
• Develop and implement a FlexSys™ simulator update, based on the existing priority list and outstanding issues.
• Please tell us what you want in terms of your priorities for this update?
• Wish list items
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Priorities, Development, Priorities, Development, & Testing& Testing
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Today’s Agenda - DetailsToday’s Agenda - Details
• Priorities, Development, & Testing– Priorities for next update
– Testing of updates
– Distribution of Lite training materials
– Priority list for future developments• Request for further alliance member feedback
– Using FlexSys™ on a MAC (APR)
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Priorities For The Next UpdatePriorities For The Next Update
• Instead of looking into the detailed specifications in the priority list, we are going to the overall group titles.– They are not listed in a priority order!
• We would like some feedback on what you see as the greatest priorities to you.
• If you want to add to the list, please feel free to let us know
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Priorities For The Next UpdatePriorities For The Next Update
1. Continue to address bugs & reported faults to eliminate them.
2. Complete & distribute FlexSys™ Lite systems.
3. Develop access to the student trace plus import & export features for standard simulator version
4. Add ink creation ability to print job generator
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Priorities For The Next UpdatePriorities For The Next Update
5. Update standard print jobs.
6. Update all documentation & add localized support document access.
7. Activate the Easy, Standard, and Difficult levels for training exercises.
8. Program dryer unit selection to match all of the detailed components.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Priorities For The Next UpdatePriorities For The Next Update
9. Enhance ink properties and adjustments available.
10. Enhance laminate properties and functionality.
11. Add ability to display previous copies, select the location for adhesion test, and reselect magnifier copydesk functions
12. CS press, update inter unit labels & dryer
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Priorities For The Next UpdatePriorities For The Next Update
13.Add new training materials (initially via Lite training).
14.Correct typo errors and spelling within the simulator interfaces.
15.Update graphics for IL console and CS ink pumps.
16.Enhance mounting tape properties.17.Update graphics on trainer interface.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Testing Of UpdatesTesting Of Updates
• Intermediate updates will be available in 2003, in preparation for the next full release.
• The beta versions of intermediate updates will be available to subscribed Alliance members to test and benefit from.
• Subscribing alliance members not wishing to participate in testing, will receive their update only following the completion of beta testing.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
CLICK ON THE CIRCLES TO ACCESS THAT SECTION OF THE PRESENTATION OR ON
EXIT TO QUIT THE PRESENTATION
EXIT
Presentation MenuPresentation Menu
EXIT
REVIEW OF MAY
MEETING
FlexSys™LITE
PRIORITIES& GROUP
ACTIVITIES
ALLIANCEMEMBERCHANGES
INTRODUCTION& WELCOME
PRODUCT UPDATE& NEWS
FLIPSSDEMO
KEEPINGUP TODATE
Press On TheCircles To MoveTo The Required
Presentation Section
NOTE! View Each Of The Sections InTurn To CompleteThe Presentation
1
2
3
4
5
7
8
6
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Alliance Members – Alliance Members – Keeping Up To DateKeeping Up To Date
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Alliance Members – Keeping Up To Alliance Members – Keeping Up To DateDate
• In 2003 there will be 2 Alliance group meeting– FFTA Forum, May, Salt Lake City
– Joint SGI Users / FTC Alliance, November
• Intermediate newsletters, February & August
• Email updates & announcements
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Alliance Members – Keeping Up To Alliance Members – Keeping Up To DateDate
• Direct email communication– Rick Mix [email protected]
– John Anderson [email protected]
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Participation For Testing And Participation For Testing And Evaluation Of Updates And Evaluation Of Updates And
Support ProductsSupport Products
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Participation For Testing And Participation For Testing And Evaluation Of Updates And Support Evaluation Of Updates And Support
ProductsProducts• Subscribed Alliance Members will
receive:– Single digital copy of a lite training system
and support materials
– Exclusive alliance member support items** For a set period before inclusion with a SGI update
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Participation For Testing And Participation For Testing And Evaluation Of Updates And Support Evaluation Of Updates And Support
ProductsProducts• Exclusive alliance member support items*
• Updated links to new multimedia materials• Improved support documents for existing training• Tutorials for users – FLIPSS & FlexSys™• Tutorials for administrators - FLIPSS & Trainer• New training materials• Additional support documentation
* For a set period before inclusion with a SGI update
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
What Is Required To Beta Test?What Is Required To Beta Test?
• Beta versions of software or other support materials will first be tested by John Anderson.
• Beta test sites will receive a copy of the materials, installation instructions, and a list of the items.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
What Is Required To Beta Test?What Is Required To Beta Test?
• Beta testers can use the materials, etc., supplied.– They are expected to report any faults that occur.– Reporting as many details as possible directly to
John Anderson
• If no problems occur within a set period, the beta will be released as an update to all alliance members.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Updated Feedback Chain For Updated Feedback Chain For Results, Requests, & Results, Requests, &
CommentsComments
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Updated Feedback Chain For Results, Updated Feedback Chain For Results, Requests, & CommentsRequests, & Comments
• The consolidation and new status for FTC alliance members support results in a streamlining of the feedback process.
• Feedback is now much more direct.
• Feedback can be provided to Rick or John. – If by email should be copied to both.
• John will consolidate a single list of issues & priorities for both the FTC & SGI
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Summary Of Benefits Of Summary Of Benefits Of FTC Alliance Membership FTC Alliance Membership
In 2003In 2003
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Summary Of Benefits Of Summary Of Benefits Of FTC Alliance Membership In 2003FTC Alliance Membership In 2003
• Annual software updates
• Unlimited email and telephone support
• Lite simulator training & support documents, as soon as available
• Additional training materials for the standard functions– 40 exercises for the professional simulator
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Summary Of Benefits Of Summary Of Benefits Of FTC Alliance Membership In 2003FTC Alliance Membership In 2003
• New tutorials to assist users of the simulator and FLIPSS
• New tutorials to assist administrators for FLIPSS customization & Trainer functionality
• Enhanced communications and interactive development (plus beta testing)
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Summary Of Benefits Of Summary Of Benefits Of FTC Alliance Membership In 2003FTC Alliance Membership In 2003
• Two alliance group members meetings per year
• Quarterly updates & newsletters
• Regular updates of multimedia materials and links
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Open Discussions And Open Discussions And Practical SessionsPractical Sessions
Please feel free to discuss any issues and try the changes
discussed.
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
Ask the Experts!Ask the Experts!
Open Question And Answer Session
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
ClosureClosure
Thank You for Your Attention!
Any Questions?
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FLIPSS Customization Upgrade
Dongle #2 (IPSS)
Purchase A Consultation Only Version Of FLIPSS: SGI Will Reprogram The Simulator Key And The FLIPSS Key.
Non-FTA Members - $1500FTA Members - $1250
FLIPSS Customization
FlexSys™ Professional SimulatorDongle #1 (FlexSys™)
Standard Simulator
FLIPSS Consultation
Trainer Customization
FLIPSS Consultation
Option 3 – Separate FLIPSS Option 3 – Separate FLIPSS Customization ModuleCustomization Module
FTC Alliance Group / SGI Users Meeting 2002 www.flexography.org /
www.sinapsegraphic.com
FlexSys™ Professional Simulator
Dongle #1 (User)
Standard Simulator
FLIPSS Consultation
FLIPSS Customization Upgrade
Dongle #3 (IPSS)
FLIPSS Customization
FLIPSS Consultation
Option 4 – Separate Trainer & Option 4 – Separate Trainer & FLIPSS Customization ModuleFLIPSS Customization Module
FlexSys™ Professional Simulator
Dongle #2 (Trainer)
FLIPSS Consultation
Trainer Customization
Additional Security Key & FLIPSS Costs: Non-FTA Members
$500 + $1500= $2000
FTA Members $400 + $1250 = $1650