ft1d ams sheet eng eh044m569
TRANSCRIPT
-
8/18/2019 Ft1d Ams Sheet Eng Eh044m569
1/1
Important change in AMS Feature
The AMS (Automatic Mode Select) feature of the FT1DR/DE has
been changed as follows:
To utilize the AMS transmit mode: go to Set Mode [2 TX/RX] à choose [2 DIGITAL] à choose [1 DIGITAL mode] à choose [AMS
MODE], and then return to the MAIN operating screen.
Using the [DX] key, choose the AMS operating mode with reference to
the following table:
Available
settingsDisplay Explanation of function
AUTO ▎○○ TX/RXThe operating mode is automatically selectedfrom the four communication modes to match the
received signal.
TX M ▎○○ TX/RX
The operating mode is automatically selected
from the four communication modes to match the
received signal.
Momentarily pressing the [PTT] key toggles
between Digital and Analog communication modes.
TX FM
▎○○
RX
The RX mode is automatically selected from the
four communication modes to match the received
signal.
TXThe TX mode is automatically changed to the "FM"
mode.
TX DN
RX
The RX mode is automatically selected from the
four communication modes to match the received
signal.
TXThe TX mode is automatically changed to the "DN"
mode.
TX VW
RX
The RX mode is automatically selected from the
four communication modes to match the received
signal.
TXThe TX mode is automatically changed to the "VW"
mode.
The OO symbol display differs according to the received signal.
YAESU MUSEN CO., LTD. EH044M569
Blink
Blink