from concept to construction - phuoc khangphuockhang.com/userimages/3m...
TRANSCRIPT
The building and construction industry is changing
rapidly. This easy-to-use interactive tool can help
your customers stay one step ahead, with innovative
3M solutions for helping expand their design
capabilities, improve product performance and
optimize manufacturing efficiencies.
3M Industrial Adhesives and Tapes Division
BUILDING & CONSTRUCTION
From concept to
construction
ELECTRONICS
With more than 100 years of expertise creating products and solutions for
buildings, 3M can help architects, engineers and builders design and
construct buildings that last longer, perform better and get finished on
time and on budget.
Innovative Solutions for the Building & Construction Industry
EXTERIOR
Click on a red dot below to learn more about 3M Building & Construction Solutions.
2
INTERIOR SITE WORK
INTERIOR SITE WORK
EXTERIOR
HOME PRODUCTS
3
ExteriorConstantly exposed to extreme conditions, building
exteriors must be attached, sealed, waterproofed,
protected and finished. 3M products and technologies
are there for virtually every step of the design and
building process, helping you maximize design and
construction efficiencies, while lowering your costs and
improving long-term performance.
Roofing
Precast/Tilt-up
Architectural Panel
Concrete/Masonry Waterproofing
Air Barrier
INTERIOR SITE WORKEXTERIOR
Caulking/Sealants
HOME PRODUCTS
Thermal Protection
Mechanical Equipment
Stucco/EIFS
Temporary Enclosures
Structural Glazing
INTERIOR SITE WORKEXTERIOR
InteriorFrom plumbing installation, HVAC sealing, electrical work
and fire protection solutions to insulation attachment,
drywall systems, paint masking and flooring attachment, 3M
interior solutions are integral to the success of any building
or structure. A leader in product innovation, 3M’s advanced
technologies have set the standard for building and
construction performance for more than 100 years.
4
Fire Protection
Flooring
Drywall
Carpentry
Interior Wall Panel
HVAC
HOME PRODUCTS
Insulation
INTERIOR SITE WORKEXTERIOR
Site WorkGetting a good start is crucial to any construction project.
3M solutions for site work, including advanced sealants and
adhesives, can help make sure your projects kick off on the
strongest footing.
5
Parking Lot
Site Concrete
HOME PRODUCTS
INTERIOR SITE WORKEXTERIOR
6
HOME PRODUCTS
Precast/Tilt-up
Form Work:
Anchoring form work can be challenging at times. By using an
adhesive to secure forms in place, the necessary repairs to the
concrete slab are minimized.
• 3M™ Hi-Strength 90 Inverted Spray Adhesive
Reveals:
Chamfer strips and reveals are often used to create relief in pre-cast
walls. Using an adhesive to attach the foam or wood strips can help
minimize the damage caused to concrete slabs by traditional
anchoring methods.
• 3M™ Polystyrene Foam Insulation 78 Inverted
Spray Adhesive
• 3M™ Hi-Strength 90 Inverted Spray Adhesive
7
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Structural Glazing
Structural Glazing:
3M™ VHB™ Structural Glazing Tapes are fully-cured, durable, highperformance, pressure-sensitive acrylic foam tapes. They are used for attaching glass panels to metal frames in curtain wall systems, commercial windows and doors, skylight and canopy systems replacing commonly used structural silicone sealants, mechanical fasteners, and gaskets. Application history since 1990 and third party test results demonstrate the outstanding durability, UV resistance and temperature performance of 3M™ VHB™ Tape acrylic foam chemistry.
These tapes offer significant value to contract glazers, curtain wall, commercial window and door system manufacturers. Benefits include:
• Ease of application with tape-based bonding system as compared to wet-glazed systems or mechanical fasteners
• Immediate handling strength after bonding of glass or metal panels to frame resulting in increased throughput and quicker delivery, installation and occupancy
• No two-part pumps or associated equipment maintenance with liquid applied structural glazing sealants
• No warehouse space requirements for the curing of glazed units• Less than 5% adhesive waste factor• Thermal performance at 0.09" equal to or better than structural silicone
sealants (at 0.25”) based on independent testing and thermal modeling• LEED Credit for Low VOC emitting adhesive• Application warranty available for approved projects
• 3M™ VHB™ Structural Glazing Tapes B23/G23
8
Roof Tile Adhesive: 3M offers proven polyurethane roof tile adhesive products AH-160 and
RTA-1 that are the professional roofer’s complete solution for concrete
and clay roof tile attachment. 3M Roof Tile Adhesives are specifically
designed to adhere a variety of concrete and clay roof tiles to various
compatible substrates in both new and reroof applications.
• 3M™ 2-Component Roof Tile Adhesive AH-160
• 3M™ 1-Component Roof Tile Adhesives RTA-1
Insulation Attachment: By using adhesives to attach insulation on the roof of a building, thermal
bridging typically caused by mechanical fasteners is reduced, wind uplift
performance is improved, and there is no longer a need for expensive
equipment and machines used with mechanical fasteners. All of these
extend the life of the roofing system.
• 3M™ Polyurethane Foam Insulation Adhesive CR-20
Membrane Attachment: The roofing membrane protects the building from the elements. Using an
adhesive to attach the membrane eliminates the need to puncture it,
reduces thermal bridging usually caused by mechanical fasteners,
improves wind uplift performance, and eliminates the need for expensive
equipment and machines used with mechanical fasteners. All of these
extend the life of the roofing system.
• 3M™ Scotch-Weld™ Hi-Temperature Polystyrene Foam Insulation 78 HT Spray Adhesive
Temporary Repair: There is a lot of cost associated to roof leaks including what’s inside the
building and the structure of the building. A leaky roof can lead to the
loss of material in a warehouse, damage to the building structure itself,
lost time on a production line, etc. It’s important to maintain the integrity
of the roofing system to prevent damage from occurring.
• 3M™ Extreme Sealing Tape 4411/4412
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Termination Materials: Termination materials tie the roofing system into the wall
assembly. It’s important to have a proper transition with
compatible materials in order to maintain a water tight seal.
• 3M™ Air and Vapor Barrier Membrane 3015
Metal Flashings: Metal flashings are used in transition areas for building
aesthetics. They protect the membranes at these transition
points. It’s important to have as few punctures in these
critical areas as possible and the use of tapes and adhesives
eliminates the need for mechanical fasteners.
• 3M™ VHB™ Architectural Panel Tapes
• 3M™ Masking Tapes
• 3M™ Temporary Surface Protection Tapes
Roofing
9
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Mechanical Equipment
Exterior Duct Insulation Protection: Insulation jacketing is used for long-term protection of the insulation
material surrounding exterior duct work. Proper jacketing can extend
the life of the insulation material and optimizes performance.
• 3M™ VentureClad™ Insulation Jacketing Tape 1577CW
• 3M™ VentureClad™ Heavy Duty Insulation Jacketing
Tape 1579GCW
10
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Stucco/EIFS
Surface Protection:
After an exterior finish is complete, it’s important to have a tape that
provides clean removal when attaching a protective covering.
• 3M™ Venture Tape™ PE Stucco Tape 1499
Insulation-to-Wall Bonding:
Using an adhesive to attach the insulation eliminates the need to
puncture it, meaning layers below are not compromised. Thermal
bridging usually caused by mechanical fasteners is reduced and the
need for expensive equipment used with mechanical fasteners is
eliminated.
• 3M™ Polystyrene Foam Insulation 78 Inverted
Spray Adhesive
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Temporary Enclosures
Seaming Poly Enclosures:
Temporary enclosures are used to extend the construction season in
northern climates and in wet regions. Properly securing the seams
with tapes or adhesives can reduce labor costs, save on heating
costs, and help keep projects on schedule.
• 3M™ Performance Plus Duct Tape 8979
• 3M™ Super 77™ Multi-Purpose Spray Adhesive
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
11
Architectural Panel Attachment:
3M™ VHB™ Architectural Panel Tapes are durable, high performance,pressure-sensitive acrylic foam tapes. These tapes are used for manyapplications in the construction industry, including the manufacture ofexterior architectural panels, building cladding, brake metal and trimattachment. Since 1980, 3M™ VHB™ Architectural Panel Tapes havereplaced rivets, spot welds, liquid adhesives, sealants and other permanent fasteners in thousands of applications worldwide.
3M™ VHB™ Architectural Panel Tapes allow for invisible attachment of panels to frame assemblies and stiffeners to panels. Other benefits include immediate handling strength during the fabrication process; elimination of ghosting as stresses are distributed over entire bond area; and, bonding of dissimilar materials.
• 3M™ VHB™ Architectural Panel Tape B11F/G11F
• 3M™ VHB™ Architectural Panel Tape B16F/G16F
• 3M™ VHB™ Architectural Panel Tape B90F/G90F
Find out more information on these products at 3M.com/construction
Attachment of Perimeter Clip to Aluminum Composite Material Panel Stiffener Attachment
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
12
Architectural Panel
INTERIOR SITE WORKEXTERIOR
13
HOME PRODUCTS
Caulking/Sealants
Primary Water Sealing:
Sealants are used on nearly every construction project to prevent
moisture intrusion in and around the building. Having a high quality
product that exhibits good adhesion to many common building
materials is important to prolong the life of the building.
• 3M™ Polyurethane Construction Sealant 525
• 3M™ Polyurethane Construction Sealant 540
• 3M™ Hybrid Sealant 740
INTERIOR SITE WORKEXTERIOR
14
HOME PRODUCTS
Concrete/Masonry
Temporary Protection:
On most job sites, a temporary floor protection product is used to
protect the finished concrete floor. It’s important to have a tape that
provides clean removal when attaching the floor protection material
to the floor.
• 3M™ Heavy Duty Duct Tape 3939
Expansion/Control Joints:
Expansion and control joints are used in many concrete surfaces to
minimize cracking caused by settlement, freeze/thaw cycling and
other environmental conditions. Using high quality sealants can
reduce the risk of moisture intrusion, further extending the life of
concrete surfaces.
• 3M™ Polyurethane Construction Sealant 525
15
Prep Work: Proper preparation of the surface substrates is a critical step in the air barrier installation process. This is where any gaps or voids in the exterior gypsum sheathing are filled and also where any loose debris, such as dirt and mud, is cleared from the surface. Having a clean surface ensures the adhesion of the air barrier membrane to the wall will be strong.
• 3M™ Polyurethane Construction Sealant 525
• 3M™ Air and Vapor Barrier Membrane 3015
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Seaming: Addressing the joints in the exterior gypsum sheathing and transitions between dissimilar substrates, such as gypsum sheathing and CMU, is necessary to create a complete air barrier system. Seaming these joints is especially important when using a spray-applied air barrier material because gaps are typically wider than what the spray-applied material can cover.
• 3M™ Polyurethane Construction Sealant 525
• 3M™ Air and Vapor Barrier Membrane 3015
• 3M™ Venture Tape™ Polypropylene Printed Sheathing Tape CCMC 1585CW-P2
Flashing: Flashing materials protect and cover certain joints and angles on a building, such as where a roof comes into contact with a wall, from air and water leakage. Incorporating these materials into the air barrier system is necessary in order to keep water and air out of the building.
• 3M™ Air and Vapor Barrier Membrane 3015
INTERIOR SITE WORKEXTERIOR
HOME
Membrane: The air barrier membrane prevents air and water infiltration within the wall assembly. Self-adhered membrane products work well in densely populated areas where the risk of overspray is high and for buildings with a high number of details and openings. A spray-applied membrane is most useful on large continuous wall areas and where productivity and efficiency are important.
• 3M™ Liquid Air Barrier 2085VP
• 3M™ Air and Vapor Barrier Membrane 3015
• 3M™ Venture Tape™ Polypropylene Printed Sheathing Tape CCMC 1585CW-P2
Fenestrations/Penetrations: Proper detailing around openings in a wall (doors, windows, vents, pipes, louvers, etc) will create a continuous air barrier system. These openings are typically the main cause of air and water leakage in a building, so addressing these properly is important for the entire life of the building.
• 3M™ Polyurethane Construction Sealant 525
• 3M™ Air and Vapor Barrier Membrane 3015
PRODUCTS
Air Barrier
16
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Waterproofing
Membrane Attachment:
When using adhesives to attach waterproofing membranes, thermal
bridging typically caused by mechanical fasteners is reduced and
there is no longer a need for expensive equipment used with
mechanical fasteners. The adhesive also holds the membrane
securely in place so backfilling can be done.
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Drain Mat Attachment:
Using an adhesive to attach the drain mat eliminates the need to
puncture the layers below, meaning air barrier membranes are not
compromised. Adhesives reduce thermal bridging caused by
mechanical fasteners, eliminate the need for expensive equipment
used with mechanical fasteners, and hold the drain mat securely in
place so backfilling can be done.
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Foundation Insulation: When using adhesives to attach foundation insulation, thermal
bridging typically caused by mechanical fasteners is reduced, wind
uplift performance is improved, and there is no longer a need for
expensive equipment used with mechanical fasteners.
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Wall Insulation: Using an adhesive to attach the wall insulation eliminates the need to
puncture it, meaning air barrier membranes are not compromised.
Thermal bridging usually caused by mechanical fasteners is reduced
and the need for expensive equipment used with mechanical
fasteners is eliminated.
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Pipe Insulation: Insulation jacketing is used for long-term protection of the insulation
material surrounding exterior pipe and duct work. Proper jacketing
can extend the life of the insulation material and optimizes
performance.
• 3M™ VentureClad™ Insulation Jacketing Tape 1577CW
• 3M™ VentureClad™ Heavy Duty Insulation
Jacketing Tape 1579GCW
INTERIOR SITE WORKEXTERIOR
17
HOME PRODUCTS
Thermal Protection
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
18
Duct Work Seaming and Protection:
Seams are the main cause of leaks in the duct work system. Properly
sealing seams can improve energy efficiency, reduce energy costs and
extend the life of mechanical equipment.
• 3M™ Venture Tape™ Duct Wrap 1512
• 3M™ Venture Tape™ Aluminum Foil Tape 1520CW
• 3M™ Venture Tape™ UL181A-P Aluminum Foil Tape 1581A
• 3M™ Venture Tape™ UL181B-FX Polypropylene
Duct Tape 1599B
• 3M™ Venture Tape™ Aluminum Foil Tape 3520CW
Refrigeration:
Properly sealing seams and having a continuous seal in the insulation of
refrigeration lines can improve energy efficiency, reduce energy costs
and extend the life of the refrigeration equipment.
• 3M™ Venture Tape™ Line Set Tape 1507
• 3M™ VentureClad™ Insulation Jacketing Tape 1577CW
HVAC
Protection:
Interior wall panels need to be protected throughout the construction
process. Damage to the panel surface is costly to repair or replace
and can add additional time to the schedule. A 3M protective film
can help shield the panel surface from accidental damage.
• 3M™ UV Protective Tape PT2UV26B
Architectural Panel Bonding:
Aesthetics are the primary driver in the design of interior architectural wall systems. 3M™ VHB™ Architectural Panel Tapes enable architects and designers to create interior wall panel systems without the use of visible mechanical fasteners or liquid applied adhesives. Typical applications include the bonding of glass, metal, phenolic and composite panels to frame assemblies, z-clip systems and office partition systems.
• 3M™ VHB™ Architectural Panel Tape B11F/G11F
• 3M™ VHB™ Architectural Panel Tape B16F/G16F
• 3M™ VHB™ Architectural Panel Tape B90F/G90F
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
19
Interior Wall Panel
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
20
Carpentry
Trim and Molding:
Attaching trim and moldings using nails or screws means putting
holes in the finished product. Using adhesives to install trim and
molding eliminates the need to go back and patch any holes caused
by mechanical fasteners.
• 3M™ Polyurethane Multi-Purpose Adhesive 5010
Flashing Windows:
Flashing materials protect and cover certain joints and angles on a
building from air and water leakage. Flashing each window opening
is necessary in order to keep water and air out of the building.
• 3M™ All Weather Flashing Tape 8067
21
Preventing the spread of smoke and flames through penetrations in a
building is of utmost importance. Building with innovative fire-resistant
construction products and systems that help prevent the spread of fire,
smoke and toxic gases helps protect the lives and property inside and
provides an overall safer structure. There are a number of areas in the
building that require fire stopping products including mechanical,
electrical, plumbing, concrete/masonry, drywall, fire sprinkler systems,
data/communications/low voltage, and interior and exterior insulation.
• 3M™ Fire Barrier Duct Wrap 615+
• 3M™ FIP 1-Step Firestop Foam
• 3M™ Fire Barrier Silicone Sealant 2000+
• 3M™ Fire Block Foam FB-Foam
• 3M™ Fire Packing Material PM4
• 3M™ Interam™ Endothermic Mat E-5A-4
• 3M™ Fire Barrier Moldable Putty Pads MPP-1+
• 3M™ Fire Barrier Composite Sheet CS-195+
• 3M™ Fire Barrier RC-1 Restricting Collar
• 3M™ Fire Barrier Pass-Through Devices
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Fire Protection
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
22
Installation:
Adhesives are used throughout the flooring installation process. Finding
adhesives that are easy to use will increase productivity and allow for
faster turnover to the building tenant.
• 3M™ Water Based Pressure Sensitive 42 Spray Adhesive
• 3M™ Fastbond™ Pressure Sensitive Adhesive 4224NF
• 3M™ 715DC Carpet Seaming Tape
Protection:
Flooring can easily be damaged by dirt and debris or equipment, even
during the move-in process. Properly protecting flooring is important at
the end of the job to ensure timely turnover to the building tenant.
• 3M™ Carpet Protection Film 2E79C
Flooring
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
23
Gypsum Board:
Drywall overlays are commonly used during a remodel to cover
up walls that have been damaged. In older facilities lathe and
plaster was commonly used as an interior finish material.
Attaching drywall overlays with screws can be difficult in these
types of systems. Adhesives can be used as an alternative
method of attaching the drywall.
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Drywall
24
Insulation
Interior Wall Insulation and Attachment: There are a few options for building insulation including fiberglass
batting, rigid board or spray foam insulation. Using an adhesive to attach
the fiberglass or rigid insulation eliminates the need to puncture it,
optimizing thermal performance. A spray-applied insulation greatly
increases a building’s energy efficiency.
• 3M™ SFI 175 Spray Foam Adhesive
• 3M™ Scotch-Weld™ Holdfast 70 Spray Adhesive
Piping Insulation: Insulation jacketing is used for long-term protection of the insulation
material surrounding interior pipe. Proper jacketing can extend the life of the insulation material and optimizes performance.
• 3M™ Venture Tape™ ASJ Facing Tape 1540CW
• 3M™ VentureClad™ Insulation Jacketing Tape 1577CW
Duct Insulation: Attaching duct insulation using a mechanical fastener results in
puncturing the duct. Using adhesives to attach duct insulation eliminates
the need to puncture the duct work and ensures an unpierced duct.
• 3M™ Fast Tack Water Based Acrylic Adhesive 1000NF
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
24
Rigid Insulation Seaming: An insulation system free of gaps will prolong the life of any building
and increase energy efficiency. Using tapes to properly seam the rigid
insulation in a building will ensure a secure and continuous seal.
• 3M™ Venture Tape™ Aluminum Foil Tape 1520CW
• 3M™ Venture Tape™ FSK Facing Tape 1525CW
• 3M™ Venture Tape™ Metal Building Facing Tape 1531CW
• 3M™ Venture Tape™ Metal Building Facing Tape 1537CW
• 3M™ Venture Tape™ ASJ Facing Tape 1540CW
• 3M™ Venture Tape™ Metal Building Facing Tape 1547CW
• 3M™ Venture Tape™ Metal Building Facing Tape 1551CW
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
25
Parking Lot Geotextile Seaming:
Geotextiles are installed during site work to manage the variability of
the soil on the job site. These fabrics can separate, filter, reinforce,
protect or drain. Using adhesives to join geotextile fabrics is typically
more time efficient than using traditional sewing methods. Adhesives
provide a strong, continuous bond and cut fabric costs down,
because less material is used in overlapping areas.
• 3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
Site Concrete:
Sealants are used on nearly every construction project to prevent
moisture intrusion around the building. Having a high quality product
that exhibits good adhesion is important to the life of the concrete
surfaces in and around the building.
• 3M™ Polyurethane Construction Sealant 525
Site Work
26
Table of ContentsAdhesive Sealants • 3M™ Polyurethane Construction Sealant 525 • 3M™ Polyurethane Construction Sealant 540 • 3M™ Hybrid Sealant 740 • 3M™ Polyurethane Multi-Purpose Adhesive
5010
Air & Vapor Barrier • 3M™ Air and Vapor Barrier Membrane 3015 • 3M™ Liquid Air Barrier 2085VP • 3M™ All Weather Flashing Tape 8067
Cylinder/Aerosol Spray Adhesives• 3M™ SFI 175 Spray Foam Adhesive • 3M™ Fast Tack Water Based Acrylic
Adhesive 1000NF • 3M™ Water Based Pressure Sensitive 42
Spray Adhesive • 3M™ Fastbond™ Pressure Sensitive
Adhesive 4224NF • 3M™ Scotch-Weld™ Hi-Temperature
Polystyrene Foam Insulation 78HT Spray Adhesive
• 3M™ Super 77™ Multi-Purpose Spray Adhesive • 3M™ Scotch-Weld™ Holdfast 70 Spray
Adhesive• 3M™ Polyurethane Foam insulation
Adhesive CR-20 • 3M™ Polystyrene Foam Insulation 78 Inverted
Spray Adhesive• 3M™ Hi-Strength 90 Inverted Spray Adhesive
• 3M™ 2-Component Roof Tile Adhesive AH-160
• 3M™ 1-Component Roof Tile Adhesives RTA-1
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
Fire Protection Protection • 3M™ Fire Barrier Duct Wrap 615+• 3M™ FIP 1-Step Firestop Foam• 3M™ Fire Barrier Silicone Sealant 2000+• 3M™ Fire Block Foam FB-Foam• 3M™ Fire Packing Material PM4• 3M™ Interam™ Endothermic Mat
E-5A-4• 3M™ Fire Barrier Moldable Putty
Pads MPP-1+• 3M™ Fire Barrier Composite
Sheet CS-195+• 3M™ Fire Barrier RC-1 Restricting Collar• 3M™ Fire Barrier Pass-Through Devices
Masking & Duct Tapes • 3M™ Masking Tapes • 3M™ Heavy Duty Duct Tape 3939 • 3M™ Performance Plus Duct Tape
8979
Protective Films & Tapes • 3M™ Carpet Protection Film 2E79C • 3M™ UV Protective Tape PT2UV26B • 3M™ Temporary Surface Protection
Tapes
Specialty Tapes • 3M™ 715DC Carpet Seaming Tape • 3M™ Extreme Sealing Tape 4411/4412
3M™ Venture Tape • 3M™ Venture Tape™ PE Stucco
Tape 1499 • 3M™ Venture Tape™ Line Set Tape
1507
• 3M™ Venture Tape™ Duct Wrap 1512 • 3M™ Venture Tape™ Aluminum Foil
Tape 1520CW • 3M™ Venture Tape™ FSK Facing
Tape 1525CW • 3M™ Venture Tape™ Metal Building Facing
Tape 1531CW • 3M™ Venture Tape™ Metal Building Facing
Tape 1537CW • 3M™ Venture Tape™ ASJ Facing
Tape 1540CW • 3M™ Venture Tape™ Metal Building Facing
Tape 1547CW • 3M™ Venture Tape™ Metal Building Facing
Tape 1551CW • 3M™ Venture Tape™ UL181A-P Aluminum
Foil Tape 1581A • 3M™ Venture Tape™ Polypropylene Printed
Sheathing Tape CCMC 1585CW-P2 • 3M™ Venture Tape™ UL181B-FX
Polypropylene Duct Tape 1599B • 3M™ Venture Tape™ Aluminum Foil
Tape 3520CW
3M™ VentureClad Insulation Jacketing Products • 3M™ VentureClad™ Insulation Jacketing
Tape 1577CW • 3M™ VentureClad™ Cooler Repair
Tape 1577CW • 3M™ VentureClad™ Heavy Duty Insulation
Jacketing Tape 1579GCW
3M™ VHB™ Tapes • 3M™ Architectural Panel Tape B11F/G11F• 3M™ Architectural Panel Tape B16F/G16F• 3M™ Architectural Panel Tape B90F/G90F
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
27
3M™ Polyurethane Construction Sealant 525
3M™ Polyurethane Construction Sealant 525 is an adhesive sealant
which cures to form a flexible and resilient bond with very good
adhesion on most materials. ASTM C920 Compliant, Construction
Specification: Section 07900 Joint Sealants
• Excellent for concrete sealing
• Very pliable/flexible
• 90+ minute skin time
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
28
3M™ Polyurethane Construction Sealant 540
3M™ Polyurethane Construction Sealant 540 is a high performance,
single-component, moisture-curing polyurethane sealant ideally suited
for a number of construction applications.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
29
3M™ Hybrid Sealant 740
3M™ Hybrid Sealant 740 is a single-component, elastomeric sealant
curing without isocyanates. This hybrid technology is paintable when
wet and will not degrade when exposed to UV.
• Excellent cosmetic sealant
• Excellent UV resistance
• Low VOC, 50-minute skin time
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
30
3M™ Polyurethane Multi-Purpose Adhesive 5010
3M™ Polyurethane Multi-Purpose Adhesive 5010 is a fast grabbing, 100
percent solids, one-part, polyurethane-based, moisture-curing adhesive
for wood bonding.
• Fast, high strength formulation
• Paintable and sandable
• Low foaming
3M™ Air and Vapor Barrier 3015 is an innovative, proprietary, translucent
air and vapor barrier that uses non-asphaltic-based adhesives, which
permit an extended application temperature range between 0°F to 150°F.
It does not require primer for most substrates and can withstand up to 6
months of direct UV exposure. The 10-mil engineered sheet membrane
self seals against nail fasteners and penetrations. It also conforms to
contours for continuous bonded contact. Available in widths up to 4 feet
wide, the air and vapor barrier can be specified locally and delivered
globally.
• No primer required
• Extended temperature range
• Translucent - stud identification
• Superior UV-exposure resistance
• Lighter weight
• Energy savings
• Ease of installation
• Meets LEED® criteria
INTERIOR SITE WORKEXTERIOR
31
HOME PRODUCTS
3M™ Air and Vapor Barrier Membrane 3015
INTERIOR SITE WORKEXTERIOR
32
HOME PRODUCTS
3M™ Liquid Air Barrier 2085VP
3M™ Liquid Air Barrier 2085VP is an innovative, proprietary, single-
component, polyether-based, water-vapor permeable, air barrier
membrane that dries fast, sticks to damp surfaces and can be applied at temperatures as low as 25°F to 100°F (-4°C to 38°C) and can
withstand up to 6 months direct UV exposure. The 26-mil (wet
thickness) engineered liquid membrane is compatible with many building
sealants; no adverse reaction with synthetic rubber, butyl, polyurethane, silicone and silane terminated hybrid sealants. Available in both 5- and 50-gallon pails.
• Single-pass spraying
• Fast skinning time
• Fast application with smaller thickness
• Superior coverage, less inventory
• Adheres to wet surfaces
• Low shrinkage, high solid content
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
33
3M™ All Weather Flashing Tape 8067
3M™ All Weather Flashing Tape 8067 is a self-adhesive barrier for use
in the construction industry to seal window and door openings against
moisture intrusion. Tape has a unique, aggressive acrylic adhesive and
thin, proprietary backing.
• Translucent, 9.9 mil tape, proprietary backing, high tack acrylic
adhesive, solid liner
• High tack, 0°F to 120°F application temperature range, self-sealing
around nails, conformable, thin, resists UV exposure for up to six
months, eligible for LEED® compliance credits, meets AAMA 711-05
• Self-adhere, UV resistance, moisture barrier, air barrier, tear resistant, durable
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
34
3M™ SFI 175 Spray Foam Adhesive is available in convenient
refillable cylinders. Low pressure, spray-foam insulation system that
is reliable, consistent ratio holding, no electricity, low maintenance,
with a low startup cost.
• Class I, 1.75 lb. density, closed-cell foam
• Cost-effective refill system; no container disposal problems
• Ideal for small and medium jobs
• Complimentary addition to a big spray foam trailer rig
• Chemical ratio precisely controlled; no manual calibration needed
3M™ SFI 175 Spray Foam Adhesive
35
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS3M™ Fast Tack Water Based Acrylic Adhesive 1000NF
3M™ Fast Tack Water Based Adhesive 1000NF Neutral is a unique, water-based adhesive specially designed to deliver an effective
combination of fast, heat-resistant bonding, repositionability and high
ultimate strength. Our adhesive is non-flammable, polychloroprene-free
and has zero VOCs (per EPA test method 24), which can contribute to
lower insurance costs and increased workplace safety.
• Solventless, one-part adhesive requires no mixing for safe, easy handling
• Stable bond provides good heat resistance for long-term endurance
• Fast bonding for immediate handling strength to keep assembly processes moving
• Low overspray and high coverage minimizes waste
• Bonds a wide variety of substrates with high temperature resistance to
meet a wide variety of needs
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
36
3M™ Water Based Pressure Sensitive 42 Spray Adhesive
3M™ Water Based Pressure Sensitive 42 Spray Adhesive is a
commercial grade, water-based, pressure-sensitive spray adhesive
containing 0% VOC content. It offers unique spray properties providing
quick drying, permanent tack and repositionability, as well as strong,
immediate shear strength specifically designed to quickly bond multiple
different substrates in a variety of applications, including but not limited
to flooring, wall tile, fabric and insulation bonding.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
37
3M™ FastBond™ Pressure Sensitive Adhesive 4224NF
3M™ Fastbond™ Pressure Sensitive Adhesive 4224NF is a water-based
carpet adhesive.
• Water-based, plasticizer-resistant adhesive
• Permanent pressure-sensitive adhesive with an aggressive tack
• Low VOC and GREENGUARD® Certified
38
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS 3M™ Scotch-Weld™ Hi-Temperature Polystyrene Foam Insulation 78 HT Spray Adhesive
3M™ Scotch-Weld™ Hi-Temperature Polystyrene Foam Insulation 78 HT
is a high strength, high temperature resistant, industrial-grade spray.
• Bonds polystyrene with no surface degradation
• High temperature resistance
• Can be used for roofing membrane attachment, mainly EPDM and TPO
• Self-contained pressurized cylinder helps increase productivity with
fast application and no time-consuming equipment setup, cleanup,
and maintenance
• Quickly bonds to most insulations and cover boards including polystyrene
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
39
3M™ Super 77™ Multi-Purpose Spray Adhesive
3M™ Super 77™ Multipurpose Adhesive is an extremely versatile,
fast-drying adhesive that bonds a wide range of lightweight materials
quickly, without soaking through. Its fast, aggressive tack makes it
ideal for a wide variety of projects.
• Versatile adhesive bonds a wide range of lightweight materials
• Fast, aggressive tack and low soak-in eliminates clamping and dry time
• Extended bond time allows 15 seconds to 30 minutes after
application before attaching surfaces
• Forms strong bonds with paper, cardboard, fabric, cushion foam,
plastic, metal, wood and more
• Low VOC, <25%, aerosol is GREENGUARD Children and Schools
CertifiedSM, meets CARB, OTC and LADCO requirements, and
helps contribute to LEED® credits
40
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS3M™ Scotch-Weld™ HoldFast 70 Spray Adhesive
3M™ HoldFast 70 Cylinder Spray Adhesive is our extremely versatile,
fast-tacking, industrial-grade spray adhesive with a unique wide-web
spray pattern well suited for bonding a variety of substrates,
including polystyrene. It requires a short dry time yet provides long
open time to work at the best pace for your job needs. It is an
effective adhesive for waterproofing and protecting from moisture.
• Creates quick permanent bonds on many substrates, including
polystyrene, drainboard, FRP panels, insulation, foams and fabrics
• Very fast-tacking adhesive bonds almost immediately and has a
long bonding range
• Produces a unique, heavy-body spray pattern with low soak-in that
is ideal for irregular or porous substrates
• Bonds polystyrene without damaging the material or degrading the surface
• Versatile holding power to replace nails and other fasteners
41
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS3M™ Polyurethane Foam Insulation Adhesive CR-20
Use 3M™ Polyurethane Foam Insulation Adhesive CR-20 for adhering
the fleece back roofing membrane as well as insulation. This adhesive
has been used to install flat roof and commercial roofing insulation for
years with great success. Now with the development of the new "spatter
pattern" technique, you can fully adhere fleece back membranes with
the same product.
• 2-3 times faster application than rollers with only a three-man crew
• A fully adhered application with no telegraphing adhesive line
• One adhesive to install insulation and fleece back membranes
• Simple "spatter pattern" application with no need for expensive foam spray equipment
• 20 squares of coverage per kit
• Adheres fleece back membranes to DensDeck®, Securock®, ISO,
structural concrete and smooth surface modifiers
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
42
3M™ Polystyrene Foam Insulation 78 Inverted Spray Adhesive
3M™ Polystyrene Foam Insulation 78 Inverted Spray Adhesive is a high strength, high temperature resistant, industrial-grade spray
adhesive.
• Bonds polystyrene with no surface degradation
• Uniform spray pattern for fast and easy application
• Utilizes upside-down spray technology
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
43
3M™ Hi-Strength 90 Inverted Spray Adhesive
3M™ Hi-Strength 90 Inverted Spray Adhesive is an upside-down spray
technology for high strength contact adhesive.
• High strength
• High temperature resistance
• Spray upside-down technology
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
44
3M™ Fire Barrier Duct Wrap 615+
Certified shaft alternative 1- and 2-hour fire-rated duct wrap. Certified for
grease ducts to ASTM E 2336 (including ASTM E119 engulfment) in 2-layer systems. Certified for ventilation ducts to ISO 6944 in 1-layer
systems and for other key life safety duct applications.
3M™ FIP 1-Step Firestop Foam is used to fill the annular space created by pipes and cables penetrating through fire-rated construction.
• Firestop tested up to 2 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
• Meets the International Building Code for Passive Fire Protection
• Expands up to 5X when dispensed; one cartridge FIP 1-Step equals up to 6 tubes 10.1 oz. caulk
• Intumescent—expands in a fire
• Expansive UL systems for blank openings, metal pipe, cables, cable trays, combos, insulated pipe
• UL systems require no mineral wool
• Remains pliable after installation for easy installation of new cables/conduit in existing opening
• Excellent adhesion; can be installed in wall or floor applications with no backing material
• Quick cure—full expansion after approximately 2 minutes
• Paintable with primer
• STC rating of 57 when tested in STC 57 rated wall assembly
• Air leakage less than 1 CFM/Sq Ft
• Meets the intent of LEED® VOC regulations: <250 g/L VOC contents (less H2O and exempt solvents)
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
3M™ FIP 1-Step Firestop Foam
45
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
46
3M™ Fire Barrier Silicone Sealant 2000+
Elastomeric, ready-to-use, single-component, neutral-cure silicone
sealant that cures upon exposure to atmospheric humidity to form a
flexible firestop seal that also acts as a barrier to airborne sound
transmission.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
47
3M™ Fire Block Foam FB-Foam
Foam-in-place fireblock and draftstop for non-rated residential and
commercial construction. Meets ASTM E 84 (mod) Class 1 for smoke
spread and flame development, has been evaluated by the
International Code Council Evaluation Service (ICC-ES), and
complies with the International Building Code (IBC) and International
Residential Code (IRC) per ICC-ES report ESR-3165.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
48
3M™ Fire Packing Material PM4
An easy-to-dispense, non-asbestos, inorganic material designed to be
used as an alternative packing material to mineral wool, fiberglass and
backer rod in through-penetration firestop systems. With excellent
strength and flexibility characteristics, it is an ideal through-penetration
packing material.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
49
3M™ Interam™ Endothermic Mat E-5A-4
3M™ Interam™ Endothermic Mat E-5A-4 is an endothermic mat designed to be wrapped around items requiring fire protection—electrical raceways, shrouds for motor-operated valves and
structural steel. The flexible felt-like material is made up of a
combination of ceramic fibers and an inorganic endothermic material.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
50
3M™ Fire Barrier Moldable Putty Pads MPP-1+
3M™ Fire Barrier Moldable Putty Pads MPP-1+ are a one-part, ready-to-
use, re-enterable, intumescent putty that can be easily formed to
firestop metallic and non-metallic electrical boxes in wall openings and
through penetrations in fire-rated assemblies.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
51
3M™ Fire Barrier Composite Sheet CS-195+
A thin, one-part composite system designed to firestop blank
openings and larger penetrations such as cable trays and conduit
and HVAC ductwork through rated construction.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
52
3M™ Fire Barrier RC-1 Restricting Collar
Works in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS for firestopping penetrations in wall, floor and floor/ceiling
assemblies. Holds the wrap strip in place and provides anchor tabs for
securing the collar assembly to the wall or floor.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
53
3M™ Fire Barrier Pass-Through Devices
Replacement foam plugs for 2-inch Round 3M™ Fire Barrier
Pass-Through Device. These foam plugs enhance the Cold and
Hot smoke seal (device can achieve UL classified L-Rating with foam plugs and 3M™ Fire Barrier Sealant or Putty
MP+, see system details).
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
54
3M™ Value Masking Tape 101+
3M™ Value Masking Tape 101+ is a cost-effective crepe paper tape that
holds, bundles, seals and performs other non-critical taping jobs where a
pressure-sensitive tape is needed. The first in our Masking Made Simple
line of tapes, 101+ offers controlled unwind to prevent shredding or
splintering and tears easily from the roll by hand.
• Cost-effective solution for indoor light-duty applications
• Crepe paper backing provides easy tearing
• Provides conformability on irregular surfaces and around corners
• Hand tearable and sliver resistance with one-piece removal for easy use
• Ideal for marking, temporary holding, wrapping and sealing
3M™ General Use Masking Tape 201+
3M™ General Use Masking Tape 201+ sticks and holds to a variety of
surfaces such as paper, fiberboard, glass, rubber, plastic and metal and
removes cleanly with no residue. This tape is the second in our Masking
Made Simple line of tapes.
• Sticks to a variety of surfaces including paper, fiberboard, glass, rubber,
plastic and metal
• Crepe paper backing is hand tearable
• Unwinds smoothly for easy to control, application, and removal
• Dependable for use in temperatures up to 200°F/ 93°C for 30 minutes
• Tough masking tape seals, holds, bundles, labels, wraps, splices and protects
• Medium conformability
3M™ Masking Tapes
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
55
3M™ Heavy Duty Duct Tape 3939 is composed of a waterproof
polyethylene film over cloth scrim backing with a rubber adhesive
used for demanding duct tape applications.
• High tack adhesive for good quick stick to many surfaces
• Conformable and moisture-resistant backing that tears easily by hand
• Tested according to UL 723 and ASTM E84
• Transportation, aerospace, automotive, commercial vehicle, RV,
bus, truck, ship yards, military, metal working, furniture,
electronics, solar, trailer manufacturing and woodworking
• Sealing, holding, bundling, reinforcing, identifying, tabbing,
wrapping, splicing and protecting
3M™ Heavy Duty Duct Tape 3939
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
56
3M™ Performance Plus Duct Tape 8979
3M™ Performance Plus Duct Tape 8979 has a unique construction
that allows for both permanent and temporary applications indoor
and outdoor. It is removable with little or no adhesive residue from
most opaque surfaces up to 6 months after application.
• Resists UV, sunlight, and weather to stay on for up to one year
without deterioration
• Special adhesive sticks immediately and reliably long term to
most surfaces
• Protects against light abrasion including overspray from bead
blasting, sand blasting, and shot peening
• Good choice for hanging polyethylene drapes for containment
activities
• Protects against grime, UV and weather, then removes cleanly
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
57
3M™ Carpet Protection Film 2E79C
3M™ Carpet Protection Film 2E79C is a co-extruded, multi-polymer
protective tape, with a very high tack adhesive system. It will adhere to
many matte textured materials with the quality you expect from 3M, so it
will last for years to come and reduces the need for rework. This product
features enhanced conformability and conforms to many products with
irregular, textured surfaces, helping you reduce the need for rework.
Protect your building and carpeting with this innovative essential.
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
58
3M™ UV Protective Tape PT2UV26B
A blue, UV-weatherable protective tape featuring a medium-tack acrylic
adhesive system. The tape offers easy removability, and its blue color
offers easy identification. For use on exterior metals, vinyls and glass,
including aluminum and anodized aluminum found in windows, doors,
frames, sashes and other door decorative trims.
• Metalized decorative panels and garage doors
• For indoor and outdoor use
• Typical physical and performance characteristics include: thickness—
2 mils; adhesion to steel—7 oz./in. width; elongation at break—600%;
color—blue
INTERIOR SITE WORKEXTERIOR
59
HOME PRODUCTS
3M™ Temporary Surface Protection Tapes
3M™ Temporary Surface Protection Tapes help provide temporary
protection of many metals, plastics and painted metal panels with
minimum adhesion buildup and clean removal.
• Provides separation for dissimilar metals and protection of many
textured surfaces
• Non-UV applications requiring extremely high abrasion resistance
60
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
3M™ 715DC Carpet Seaming Tape
3M™ 715DC Carpet Seaming Tape is used indoors or outdoors with
synthetic or foam-backed carpets or artificial turfs. This self-sticking,
fiberglass reinforced professional carpet seaming tape comes on a roll
that is 2-1/2 inches in width and 15 feet in length. No iron is needed.
3M™ Rug and Carpet Tapes come in a variety of styles and sizes. Use
them for holding rugs and carpets to a variety of subfloors, including
indoor and outdoor carpets, artificial turfs, marine carpets, foam and
synthetic-backed carpets.
INTERIOR SITE WORKEXTERIOR
61
HOME PRODUCTS
3M™ Extreme Sealing Tape 4411/4412
From rain gutters to flashing and vents, from rooftops to underground cable enclosures—3M Extreme Sealing tapes ensure a quick and robust bond. With a durable sealing that withstands harsh environmental conditions, the 3M Extreme Sealing tapes are ideal for parapet walls, trailer home roofs, metal buildings, vent stacks and windows, gutters, downspouts and much more.
• Bonds to many metals and plastics without drying time, dripping and oozing, and requires no cleanup
• No sticky mess
• Fastens to contours, edges, rivets and screw heads for a water-tight seal with ease
• No caulking guns and empty cartridges
• Easy to paint; color blends to the adjoining surfaces
• Aesthetically precise and neat
• Withstands harsh environmental conditions—sun, rain, snow, temperature extremes and abrasion
• Flexibility allows for enduring vibration and thermal expansion/contraction
• No cracks or crumbles
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
62
Used for masking surfaces during stucco and other outdoor applications.
• UV resistance
• Hand tearable
• Red color for good visibility
• Construction, general industrial
• Masking, conforming, protecting, covering
3M™ Venture Tape™ PE Stucco Tape 1499
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
63
3M™ Venture Tape™ Line Set Tape 1507
Wrapping and taping black foam and rubber insulation line sets in
refrigeration or HVAC applications.
• UL723 classified
• High tack mold inhibiting adhesive
• UV resistant
• HVAC insulation, general industrial
• Sealing, seaming, joining, reflecting, taping
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
64
3M™ Venture Tape™ Duct Wrap 1512
Specifically designed to protect uninstalled HVAC ducts from dirt, dust, moisture, and other contaminants, it is a strong, puncture-resistant film which adheres securely and leaves no residue on removal.
• Chemical and puncture resistant
• Low tack, removable, no residue
• Excellent temperature and UV resistance
• HVAC
• Shielding, masking
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
65
3M™ Venture Tape™ Aluminum Foil Tape 1520CW
Vapor seal for fibrous and sheet metal ducts as well as FSK systems.
• UL723 Classified (5/10 Flame/Smoke Rating)
• ULC S102 Classification (10/0 Flame/Smoke Rating)
• Hand tearable, cold weather adhesive
• HVAC insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
66
3M™ Venture Tape™ FSK Facing Tape 1525CW
Vapor seal on FSK faced insulation or sheet metal ducts.
• UL723 Classified (5/10 Flame/Smoke Rating)
• Tri-directional reinforcement
• HVAC insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
67
3M™ Venture Tape™ Metal Building Facing Tape 1531CW
Designed for use as a vapor seal for faced insulation.
• Tri-directional reinforcement
• Perm 0.02
• Insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
68
3M™ Venture Tape™ Metal Building Facing Tape 1537CW
Designed for use as a vapor seal for faced insulation.
• ASTM C1136 Type IV
• Tri-directional reinforcement
• Perm 0.09
• Insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
69
3M™ Venture Tape™ ASJ Facing Tape 1540CW
Vapor seal on ASJ faced duct board and pipe insulation butt joints.
• UL723 Classified (0/5 Flame/Smoke Rating)
• Facing meets ASTM-C1136, Type I, II, III and IV
• Vapor seal insulation, general industrial Insulating, facing, seaming,
joining, sealing
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
70
3M™ Venture Tape™ Metal Building Facing Tape 1547CW
Designed for use as a vapor seal for faced insulation.
• Tri-directional reinforcement
• Insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
71
3M™ Venture Tape™ Metal Building Facing Tape 1551CWDesigned for use as a vapor seal for faced insulation.
• Tri-directional reinforcement
• Perm 0.02
• Insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
72
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS3M™ Venture Tape™ UL181A-P Aluminum Foil Tape 1581A
Vapor seal on rigid duct board.
• UL181A-P Listed
• UL181B-FX Listed
• ULC S102 Listed (Flame/Smoke 0/0)
• Insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
73
3M™ Venture Tape™ Polypropylene Printed Sheathing Tape CCMC 1585CW-P2
Polypropylene sheathing tape coated with an aggressive acrylic, pressure-
sensitive adhesive.
• CCMC approved
• High tack cold weather sheating tape
• Works on most major housewraps
• Insulation, general industrial
• Sheathing, seaming, joining, insulating, bonding
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
74
3M™ Venture Tape™ UL181B-FX Polypropylene Duct Tape 1599B
Use as a flexible duct closure tape.
• UL181B-FX Listed
• Cold weather adhesive
• Hand tearable
• HVAC, general industrial
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
75
3M™ Venture Tape™ Aluminum FoilTape 3520CW
Vapor seal for fibrous and sheet metal ducts as well as FSK systems.
• UL723 Classified (5/10 Flame/Smoke Rating)
• Cold weather adhesive
• HVAC, insulation
• Reinforcing, facing, insulating, sealing, seaming, joining
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
76
3M™ VentureClad™ Insulation Jacketing Tape 1577CWA multilayered, self-adhesive white stucco jacketing system with zero
permeability vapor barrier for insulation cladding and jacketing
applications.
• ASTM E84 (25/45) Zero permeability
• Puncture and tear resistance
• Installs easily onsite
• HVAC insulation
• Cladding, jacketing protecting, facing
3M™ VentureClad™ Cooler Repair Tape 1577CW A multilayered, self-adhesive white stucco embossed jacketing system
designed for seaming coolers/refrigerator walls.
• UL723 Classified (10/20) Zero permeability
• Matches coolers/refrigerator walls
• Cold-weather adhesive system
• HVAC insulation
• Seaming, joining, refrigerating, cooling, cladding, jacketing
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
77
3M™ VentureClad™ Heavy Duty Insulation Jacketing Tape 1579GCW
A heavy-duty, multi-layered, self-adhesive jacketing system.
• ASTM E84 (10/10) Zero permeability
• Puncture and tear resistance
• Installs easily onsite
• HVAC insulation
• Cladding, jacketing, protecting, facing
78
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
78
3M™ Roof Tile Adhesives
3M™ Roof Tile Adhesives adheres each tile in place to increase wind resistance, virtually eliminate nail penetration, minimize tile installation damage, and offer superior hip and ridge attachment. 3M™ Roof Tile Adhesives are to only be installed by qualified trained roofing technicians, who hold a valid Qualified Applicator Card indicating the adhesive and dispenser qualified on and only issued by 3M. Please contact us for additional information on our 3M Roof Tile Adhesives.
3M™ 2-Component Roof Tile Adhesive AH-160 is a polyurethane adhesive that attaches clay and concrete roof tiles. 3M AH-160 is available in a variety of sizes from the convenient and factory pressurized ProPack 30 and ProPack 100 sets to the 17 & 60 Gallon Refillable Cylinder System. 3M™ AH-160 can be used without mechanical fasteners so non-nailable decks or puncturing of the waterproofing membrane on nailable roof decks are no longer a necessary concern.
3M™ AH-160 has superior holding power compared to nails, screws, mortar, wire tie systems and single component adhesives. 3M™ AH-160 meets sustainability requirements including, Thermal resistance (up to 4.4 R-value), Exceeds Title 24 energy code, VOCs less than 5 g/L, (SCAQMD Rule 1168 Compliant). 3M offers a 5, 10 and even 20 year Roof Tile Adhesive Warranty when the 3M™ AH-160 Large Paddy System is used in conjunction with one of our compatible roofing component manufactures.
Please contact 3M for additional details on the warranty program. Approved by: ICC-ES, DSA IR 15-2, Class A rated, ASTM E-108, TRI approved, Miami-Dade County, Florida Building Code, Texas Dept. of Insurance Evaluation.
3M™ 1-component Roof Tile Adhesives RTA-1 is a polyurethane adhesive, designed for attaching clay and concrete roof tiles. 3M™ RTA-1 is available in a 26 Fl oz/19.4 Net Wt Aerosol can or a 23 lb Cylinder that is portable and easy to use. Approved by: Miami-Dade County and Florida Building Code.
Years of testing and thousands of real life applications demonstrate the high
performance capability of this tape to meet the demanding requirements of
structural glazing applications.
3M™ VHB™ Structural Glazing Tapes have been tested and passed all
relevant performance tests for curtain wall/glazing systems:
• Wind load structural (ASTM E330, E1233, AS/NZS 4284)
• Air/water infiltration (ASTM E283, E331, AAMA 501.1)
• Temperature cycling (AAMA 501.5)
• Seismic (AAMA 501.4 & 501.6)
• Blast (ASTM F1642, GSA-TS01-2003)
• Glazing material properties (ETAG 002)
• Silicone sealant compatibility (ASTM C1087)
• Thermal performance (ASTM C518)
3M™ VHB™ Structural Glazing Tapes exhibit excellent durability
comparable to a two-part structural silicone sealant in extreme accelerated
aging conditions that included high intensity UV light, high temperature and
high humidity exposure. After 10,000 hours of accelerated exposure, the
survival probabilities for all bonding systems are identical (i.e., none have
failed).
INTERIOR SITE WORKEXTERIOR
HOME PRODUCTS
79
3M™ VHB™ Structural Glazing Tapes B23/G23
UV Accelerated Weathering Study (10,000 Hours)3M™ VHB™ Structural Glazing Tape vs. Structural Silicone Sealant
3M Industrial Adhesives and Tapes DivisionBuilding 225-3S-06 St. Paul, MN 55144-1000
3M, Fastbond, Interam, Scotch-Weld, Super 77, VentureClad, Venture Tape and VHB are trademarks of 3M.Scotch is a registered trademark of 3M.All other trademarks are property of their respective owners.© 3M 2015. All rights reserved.
Warranty, Limited Remedy and Disclaimer: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct or indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
LET’S DESIGN THE FUTURE.