forest-liné modumill ti - forest-liné powermill ti fives machining...with the forest-liné...
TRANSCRIPT
Forest-Liné Modumill Ti - Forest-Liné Powermill Ti
Titanium Machining Centers
Metal Cutting | Composites
Focusing on innovation in roughing and finishing titanium and hard material aircraft structural complex parts, Fives designs dedicated 5-axis profilers in vertical and horizontal configurations.
Process titanium
The physical, chemical and mechanical characteristics make titanium complex to machine. Its low conductivity can a!ect the rapid heat evacuation generated by its machining, which focuses on the tool level and the cutting edge. Titanium is likely to develop inserted edges causing cracks and a premature wear of the tools, resulting expensive machining and tooling costs.
Given these constraints, Fives has been working on the chips evacuation, the rigidity of the machine, the 5-axis milling head capabilities and the safe process, to bring dedicated ultimate solutions.
Fives solutions
With the Forest-Liné Modumill Ti and the Forest-Liné Powermill Ti, Fives o!ers adaptive solutions for titanium.
To ensure parts quality, the high pressure cooling system, up to 70 bars pressure, allows e#cient cooling of the cutting cool edges and e!ective removal chips rate, which would otherwise tend to stay around cutting tools due to low cutting feed and material characteristics.
The patented “constant overhang ram”, the largest section ram used in the machine tool industry, o!ers the conducive milling conditions, whatever the position is.
The “in-house” design and manufacture of 5-axis milling heads provides high torque up to 2,500 Nm (1843 lb-&) with rigid and compact structure.
To apply the requested applications, the safety of the process is essential. The Geometry Five-Axis Control System helps to determine the status of the geometry of the machine with an accurate description of temperature variation and within 15 minutes.
The solution can be developed together with collision detection device, video camera supervision and 3D scan of the part.
The patented “constant overhang” ensures a high sti!ness and accuracy of the machine for titanium processing, whatever the position is.
The patented “constant overhang”
Based on its strong expertise in titanium, Fives designs and manufactures dedicated solutions
High pressure cooling system
Conventional guiding system Constant Overhang PAFC
Y guidings
Crossrail Saddle
Ram
Z Carriages
800 mmConstant
Y guidings
Crossrail Saddle
Ram
Z Carriages
800 mmConstant
URC 45 URC 60
Power 45 kW / 60 hp 60 kW / 80 hp
Torque 1,200 Nm / 885 lb-! 2,500 Nm / 1843 lb-!
Speed 6,000 rpm 3,000 rpm
Taper HSK 100 A / ISO 50 HSK 100 A /HSK 160 B
Stroke +/- 110° +/- 110°
Rotary speed 10 rpm 10 rpm
Pivot distance 230 mm / 9 in 250 mm / 9 in
Drive Two electrical preloaded reducer pinions and gear
Two electrical preloaded reducer pinions and gear
Measurement Direct encoder Direct encoder
Driving Torque 6,000 Nm / 4,425 lb-! 12,000 Nm / 8,850 lb-!
Clamping device 6,000nm / 4,425 lb-! 8,000 Nm / 5,900 lb-!
Stroke +/- 200° +/- 200°
Rotary speed 10 rpm 8 rpm
Drive Two electrical preloaded reducer pinions and gear
Two electrical preloaded reducer pinions and gear
Measurement Direct measure Direct measure
Driving Torque 6,000 Nm / 4,425 lb-! 8,000 Nm / 5,900 lb-!
Clamping device 12,500nm / 9,220 lb-! 12,500 Nm/ 9,220 lb-!
HS1
Power 63 kW / 85 hp
Torque 300 Nm / 221 lb-!
Speed 15,000 rpm
Taper HSK 100 A
Stroke ± 110°
Rotary speed 20 rpm
Pivot distance 330 mm
Drive Preloaded pinions and gear
Measurement Direct encoder
Driving Torque 2,000 Nm / 1,475 lb-!
Clamping device 5,000 Nm / 3,688 lb-!
Stroke ± 200°
Rotary speed 17,5 rpm
Drive Two electrical preloaded reducer pinions and gear
Measurement Direct measure
Driving Torque 4,500 Nm / 3,319 lb-!
Clamping device 12,500 Nm / 9,220 lb-!
5-axis High Torque Mechanical Spindles
5-axis High Speed HF-Spindle Head
Copyright ©
2015
- F
ives
- All
rights
rese
rved
Ergonomic & Automation— Stand alone with Automated Pallet
System— FMS cell automation— 19 in screen operator
Parts & Chip Management— Spindle-mounted probe — Chip conveyor — Coolant systems
Head & Tool Management— Automatic Tool Changer— Tool management— Integrated tool calibration laser — Tools ID — Narrow right angle
Secure Process— Geometry Automatic Check
System (GACS)— Collision detection device— 3D-model for simulation so#ware
Optimized Process— Thermal compensation— Power adaptive control— Post-processor
Safety & Protection— Full enclosure— Lighting of the working area— Fumes and oil mist collection
system— Power failure back-up
Production Starting Kit— 2-week assistance a#er $nal
acceptance— 1-week engineering training
Diagnostic— Supervision Pro— Remote Maintenance System (RMS)— Global services: complete life-cycle
support
FEATURES:— CNC: Siemens 840D sl — User-friendly integrated HMI: FL Vision— Direct measuring system — Eco design— CE certi$cation— 2-year full warranty
Some references for Fives titanium solutions: Asco, Avic Changhe Aircra#, Avic Shenyang, Avic Xac, Oak KnAAZ, ZSKB Progress,
Aubert & Duval, DCNS, BA E Systems
Titanium Profiler Features
Customized project on request.
Forest-Liné Modumill Ti Forest-Liné Powermill Ti
Milling way Vertical Horizontal
Chips evacuation
Rigidity
Automation
Work area (Pallet size) 2 x 4 m (up to 6 m) / 78 x 157 in (up to 236 in) 2.5 x 5 m / 98 x 196 in
Pallet load 15,000 kg / 33,069 lb 6,000 kg / 13,228 lb
X Axis travel 4.5 m / 177 in 6 m / 236 in
Y Axis travel 2.5 m / 98 in 2.5 m / 98 in
Z Axis travel 1 m / 40 in 0.8 m / 31 in
C Rotary Axis ± 200° ; n x 360° ± 200° ; n x 360°
B Rotary Axis ± 110° ± 110°
OPTIONS & SERVICES:The titanium pro$lers can be equipped with a wide range of versatile peripheral equipment and services throughout the life-cycles of the machines.
Contact us:- Forest-Liné Albert facility
Parc d’Activité Henry Potez - 80300 Albert - France - T: +33 (0)3 22 74 43 00 - www.$vesgroup.com