91

© 2000 SCOSCHE INDUSTRIES, INC. ALL RIGHTS RESERVEDFOR MORE INFORMATION VISIT www.scosche.comOR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490

REMOVE REAR SUPPORTMODIFY CAVITY

MINI STAN DIN ISO DIN

TUNERS / CASSETTE / DISC PLAYERS RADIOEQ

STACKSINGLEDBL DIN

APPLICATION KIT MODEL: FM1375/FMC1370

HARNESS ADAPTOR: FD02 ANTENNA ADAPTOR: VWA

IN-DASH INSTALLATION AREA DIMENSIONS

DEPTH WIDTH HEIGHTMAX

DEPTH

CAVITY 81/2" 81/2" 71/8" 311/16"

TYPE: PLASTICDASHOPENING

DASH MATERIAL: PLASTIC THICKNESS:

FOR MAX DEPTH

AMPLIFIER/EQ MOUNTING LOCATIONS (WxHxD)

UNDER/IN UNDER GLOVE TRUNK/DASH SEAT BOX CARGO

13 x 51/4 x 20" 111/2 x 57/8 x 61/8" Various

K5 = WHEN EQUIPPED WITH STANDARD TWO SHAFT RADIO/TAPE PLAYER. FABRICATEKIT WHEN EQUIPPED WITH FLAT FACE ELECTRONIC RADIO/TAPE PLAYER.

KS = SCOSCHE KIT RECOMMENDED.N = NOT RECOMMENDED. EXTENSIVE MODIFICATION REQUIRED.P = PERFECT WITHOUT MODIFICATION.P1 = MODIFY OR REMOVE POCKETS.P2 = COIN POCKET LOCATION IN DASH (MAY REQUIRE TRIM KIT).P3 = PERFECT WHEN EQUIPPED WITH STANDARD TWO SHAFT RADIO, K WITHOUT.R = REAR LOAD ISOMOUNT.U = UNDERDASH.W1 = WITH POWER WINDOWS ONLY.W2 = WITHOUT POWER WINDOWS ONLY.

IN DASH APPLICATION NOTES

CHASSIS H 13/4-2 2 2 2 37/8 3

CHASSIS W 71/8 71/8 71/8 7 71/8 71/8

CHASSIS D 43/4-51/2 57/8-6

11/16 57/8-611/16 57/8-6

11/16 57/8-611/16 57/8-6

11/16

NOSE H 15/8-13/4 15/8-1

3/4 23/8 113/16 33/4-4

NOSE W 41/8-43/16 41/8-4

3/16 71/2 611/16 611/16-71/4

SHAFT SP. 51/8-53/4 51/8-6

NO

TE

:T

HIS

MA

NU

AL

IS B

AS

ED

ON

CA

RE

FU

LLY

DO

CU

ME

NT

ED

RE

SE

AR

CH

. AB

SO

LUT

EA

CC

UR

AC

Y IS

AT

TE

MP

TE

D B

UT

NO

T G

UA

RA

NT

EE

D. U

SE

TH

IS M

AN

UA

L A

S A

RE

FE

RE

NC

EG

UID

E. S

CO

SC

HE

, IN

C. C

AN

NO

T B

E R

ES

PO

NS

IBLE

FO

R I

NC

ON

SIS

TE

NC

IES

TH

AT M

AY

OC

CU

R.

KS KS KS N N K4

B = BACK UP PLATES REQUIRED.C1 = CUT TRIM/PLASTIC (STRUCTURE).C2 = CUT STEEL.D = BELOW DECK ONLY.D1 = LIFT PORTION OF DECK. (MAY REQUIRE STRUCTURAL REINFORCEMENT).D2 = CUT STEEL WHEN TOP MOUNTED. DO NOT IF BELOW DECK.D3 = NARROW SURFACE, BELOW DECK ONLY.F1 = MINIMUM MODIFICATION FILE SHAFT HOLES OR DASH OPENING.F2 = MODIFY DASH CAVITY AND/OR PANEL.K = INSTALLATION KIT, SPACER OR ADAPTOR REQUIRED.K1 = KIT MODIFICATIONS REQUIRED.K2 = EXTENSION KIT RECOMMENDED.K3 = WHEN EQUIPPED WITH FACTORY "ELECTRONIC" RADIO.K4 = FABRICATE PANEL/BRACKETS.

FORD2000-UP FOCUS4 Door Sedan / Wagon, 3 Door Hatchback

Dimensions shown are inches.For inch/mm conversions refer to chart section.

UPDATEDTHROUGH

2001200220032004

FRONT DOORSFactory Provisions: "

K =SA68

6 x 8Aftermarket: 5 / "K , 6 / K , 6 x 8"1 s 1 S

4 2s

"

CAVITY W H D5 / x / x 2"1

4 471

DASH WITH SCOSCHE FMC1370 KIT INSTALLED.

REAR SIDE PANELS - HATCHBACKFactory Provisions: 6 x 8"

K =SA68Aftermarket: 5 / "K , 6 6 x 8"1 S

4S

1 S/ "K ,2

CAVITY W H D5 / x 7 / x 2 / "1 1 1

4 4 2

xx

REAR DOORFactory Provisions:Aftermarket:

CAVITY W H D

6 x 8"5 / "K , 6 / "K , 6 x 8"1 s 1 s

4 2

K = SA68s

5 / x 7 / x 2 / "1 1 14 4 2

-SEDAN, WAGONS

92

© 2000 SCOSCHE INDUSTRIES, INC. ALL RIGHTS RESERVEDFOR MORE INFORMATION VISIT www.scosche.comOR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490

DASH WITH RADIO/TRIM REMOVED. FRONT DOOR PANEL.

REAR DOOR PANEL.

REAR SEAT SIDE PANEL SPEAKERS.

PRELIMINARY: DISCONNECT THE NEGATIVE BATTERY CABLE.

ANTENNA: THE FACTORY ANTENNA IS LOCATED IN THE CENTER FRONTOF VEHICLES ROOF.

RADIO REMOVAL AND IN-DASH INSTALLATION:NOTE: THE FACTORY RADIO PROVISION IS A CUSTOM FORD DOUBLE

DIN. WHEN INSTALLING AN AFTERMARKET DIN STEREO A DASH KITIS NEEDED. WE RECOMMEND THE SCOSCHE FM1375 OR FMC1370INSTALLATION KIT. A SET OF DIN REMOVAL TOOLS IS ALSO NEEDEDTO REMOVE THE FACTORY HEAD UNIT. WE RECOMMEND THESCOSCHE DT-1 FORD DIN REMOVAL TOOLS.

1. INSERT FORD DIN REMOVAL TOOLS TO RELEASE CLIPS, PULL OUTSTEREO, DISCONNECT AND REMOVE.

FRONT DOOR SPEAKER INSTALLATION:NOTE: THE FACTORY SPEAKER PROVISION IS FOR A 6 X 8” SPEAKER.

WHEN INSTALLING AN AFTERMARKET 5 ¼ OR 6 ½ SPEAKER, ASPEAKER ADAPTER IS REQUIRED. WE RECOMMEND THE SCOSCHESA68.

1. EXTRACT (7) T-15 TORX SCREWS FROM THE PERIMETER OF DOORPANEL.

2. REMOVE SCREW COVER FROM DOOR OPENER CUP, AND EXTRACT (1) #2 PHILIPS HEAD SCREW FROM BEHIND.

3. USING A PANEL REMOVAL TOOL, UNSNAP THE SIDE MIRROR INTERIORTRIANGLE PANEL, LIFT AWAY AND REMOVE.

4. UNSNAP COVER FROM DOOR HANDLE, AND EXTRACT (2) #3 PHILIPSHEAD SCREWS FROM BEHIND RADIO.

5. UNSNAP TOP CONTROL PANEL, LIFT AWAY DISCONNECT AND REMOVE. 6. PULL DOOR PANEL UPWARDS AND REMOVE. 7. EXTRACT (4) # 2 PHILIPS HEAD SCREWS FROM SPEAKER, DISCONNECT

AND REMOVE.

REAR DECK SPEAKER INSTALLATION:NOTE: THE FACTORY SPEAKER PROVISION IS FOR A 6 X 8” SPEAKER.

WHEN INSTALLING AN AFTERMARKET 5 ¼ OR 6 ½ A SPEAKERADAPTER IS REQUIRED. WE RECOMMEND THE SCOSCHE SA68.

1. EXTRACT (7) T-15 TORX SCREWS FROM THE PERIMETER OF DOORPANEL.

2. REMOVE SCREW COVER FROM DOOR OPENER CUP, AND EXTRACT (1)#2 PHILIPS HEAD SCREWS FROM BEHIND.

3. REMOVE TRIANGLE PANEL AT TOP FRONT SIDE OF DOOR PANEL.4. UNSNAP COVER FROM DOOR HANDLE AND EXTRACT (2) # 3 PHILIPS

HEAD SCREWS FROM BEHIND.5. UNSNAP CONTROL PANEL, LIFT AWAY DISCONNECT AND REMOVE.6. PULL DOOR PANEL UPWARDS AND REMOVE.7. EXTRACT (4) # 2 PHILIPS HEAD SCREWS FROM SPEAKER, DISCONNECT

AND REMOVE.

2000-UP FORD FOCUS4 DOOR SEDAN, WAGON, 3 DOOR HATCHBACK