for all generations of aircraft · for reliable, dependable performance 24/7/365. • innovative,...
TRANSCRIPT
SHIP-TO-SHORE
The FCXtreme Series Model PFC036 provides FCX Systems’ rugged and reliable performance in a rating ideally suited for point of use applications. Its small footprint and low profile provide for easy integration into the hangar, flight line, or other environment.
All models engineered, optimized and tested for true continuous output power rating with 200% overload capacity - for reliable, dependable performance 24/7/365.
• Innovative, adaptive wave optimization and voltage stabilization for low input THD and precise performance without the efficiency penalty of less advanced designs
• Laminated bus design eliminates transient voltage surges for high performance and increased reliability
• Lightweight powder-coated steel enclosure with sealed electronics compartment superior to typical aluminum enclosures to reduce both emissions of, and susceptibility to, RFI and EMI
• Full-featured user interface with detailed troubleshooting menus added to the advanced diagnostic and logging system
• High contrast LED display with 16-button keypad and separate standalone controls to ensure ease of use for most frequent functions
• Standard RS485 Modbus communication and integration capability with available RJ45 Ethernet and Wi-Fi connection capability
www.fcxinc.com | 304.983.0400 | [email protected]
Ground POWER Solutions For All Generations Of Aircraft
ISO 9001:2008
UNIT PERFORMANCEEfficiency 93% or better at 100% load
28VDC Output Available 200A rated 28VDC output with 400% surge rating
MTTR Mean time to repair: less than 30 minutes
Operational Life 20 to 25 years
MTBF Mean time between failure: 24,000 hours
Suitable For: Fixed and Rotary Wing Aircraft and All Other 400 Hz Applications
PFC036 - 45KVA
Through an innovative design, advanced diagnostic and logging systems, and rugged modular construction, FCXtreme Series products assure maximum power availability and minimal maintenance time.
PRECISION FREQUENCY CONVERTERModel PFC036 - 45KVA
SPECIFICATIONS
INPUT POWERInput Voltage 480VAC +/- 10% standard, other input voltages
available
Input Frequency 60Hz +/- 10% standard, 50Hz optional
Input Phase Rotation Any (automatic phase lock)
Inrush Current None (soft start to rated power)
Protection Overload, short circuit, over voltage, temperature, access door interlock
Input ITHD <5% at rated load, <8% at any load (when input frequency is +/- 1 Hz from nominal)
OUTPUT POWEROutput Power Rating 45kVA continuous
Can be used for any 400hz application ≤ 45kVA
Output Frequency 400Hz, +/- 0.01% for any load condition
Output Voltage 200V L-L / 115V L-N – adjustable +/- 10%
Voltage Regulation +/- 1% Maximum
Voltage Recovery Meets or exceeds limits of MIL-STD-704F, typically less than 50 milliseconds with a 100% load change
Voltage Balance +/- 1% for balanced loads, +/- 2% for 25% unbalanced loads
Harmonic Content 1.5% max., 1% typical (line to line or line to neutral)
Overload Capacity 125% for one hour, 150% for 5 minutes, 200% for 20 seconds
Protection Overload, short circuit, over and under voltage per MIL-STD-704F, over temperature, isolation, aircraft 28VDC E/F interlock, access door interlock
MONITORING AND CONTROLSDisplay 4 x 20 character backlit display and dedicated
indicator lights, with LED configuration for harsh environments
Control 16-key matrix keypad for full control and monitoring, as well as dedicated stand alone push button controls for Start, Stop/Reset, and Output On/Off control for user friendly operation
Metering Full three-phase monitoring and display of input and output voltage, current, and frequency; built-in troubleshooting guide in display; dedicated elapsed time meter also provided
ENVIRONMENTAL & MECHANICALEnclosure NEMA 12 equivalent rated steel enclosure with
durable powder coat finish. Standard colors: RAL9006 “White Aluminum” (gray) or RAL9016 “Traffic White”. NEMA 4 equivalent rating is optional.
Size/Weight 52”H x 48”W x 25”D (56”W with NEMA 4 vent hoods) – 1,200 lbs. est.
Ambient Temp. Range Operating: -40˚C to +50˚C (-40˚F to +122˚F)
Humidity 0 - 100%, non-condensing
Audible Noise Level Less than 68dbA typical @ 1m
CODES AND STANDARDSMeets or Exceeds UFGS 26 35 43 NFPA 70
MIL-STD-704F SAE ARP-5015 BS2G-219 DFS-400
OPTIONS AND ACCESSORIES28.5VDC Output with 200A rating
Integral single or dual cable racks
Freestanding or wall mount cable racks
Wi-Fi communications integration
Remote operators station(s)
ISO 9001:2008
www.fcxinc.com | 304.983.0400400 FCX Lane | Morgantown, WV 26501
Engineered for Endurance
Output power cables
Power usage monitoring
Floor Stands – 18 and 24 inch height
Mobile caster mounted configuration
SERVICE AND SUPPORTAt FCX Systems, we take pride in our highly trained support staff, dedicated to providing the best operational and technical support in the industry. Factory technicians are available for on-site training, maintenance and repair services, either in conjunction with our available maintenance plans, or as standalone services. Operational and maintenance training are also available at our factory. With FCX you can rest assured that you will have the support you need, when you need it, from a friendly, professional and experienced staff, 24/7/365. Contact us at (304)983-0406 or [email protected].