fn series fluid cooler - heatcraftrpd.com21 model cross reference larkin single wide units current...
TRANSCRIPT
1
FN SERIES FLUID COOLERPremier Solutions
2
What would your “ideal” fluid cooler solution include? Lower Operating Costs
Lower Noise Levels
Higher Reliability
Easier to Service
Greater Flexibility
Lower Initial Cost
FN Series has Solutions to Lower Your Operating Costs!
3
Energy Efficient Air Mover Choices– 1.5 Hp 830 RPM motors with Swept Blade– .5 Hp 540 RPM motor with Swept Blade
FN Series has Solutions to Lower Your Operating Costs!
4
Energy Efficient Air Mover Choices (cont.)– Variable Speed EC Motor with Swept Blade
FN Series has Solutions to Lower Your Operating Costs!
5
Models available with Low Fluid Pressure Drop Coils– 5/8” Diameter tubing– Reduced pumping power requirements
Optional High Efficiency Coil Design– Optional 12 and 14 FPI coils
Optional Fan Cycling Controls– FNH, FNL and FNQ models only– FNE models feature variable speed
FN Series has Solutions to Meet Your Noise Requirements!
6
Reduced Sound Air Mover Choices– 1.5 Hp 830 RPM and .5 Hp 540 RPM
motors– Patented Quiet Edge Fan Blade
• L and Q models only• Edge Treatment
– Variable Speed EC motors
Quiet Edge Fan Blade
FN Series has Solutions to Meet Your Noise Requirements!
7
Unit Sound Data (dBA @ 10 Ft)
FN Series has Solutions to Meet Your Noise Requirements!
8
Variable Speed EC Sound Data (dBA @ 10 Ft)
FN Series has Solutions for Your Reliability Needs!
9
Floating Tube Coil Design– ½” Anchor Tube Design– 5/8” Bushing Plate Design
Fan motors – Thermal overload protection – Permanently lubricated ball bearings
Cabinet Material– Galvanized (FNH, FNL and FNQ)– Aluminum (standard FNE)– Painted galvanized steel
½” Anchor Tube Design
5/8” Bushing Plate
FN Series has Solutions for Your Reliability Needs!
10
Optional Fin / Coil protection – Copper Fins– ProKoteTM Fins– Industrial Coating
Unit Factory Tested– Pressure and leak– Electrical circuit and motor run
Extensive Unit Warranty– 5 Year against leaks at the tube sheet and center supports– 3 year on VSEC motor (FNE Models)– 2 year unit warranty
FN Series has Solutions for Your Serviceability Needs!
11
Standard 10 Fin per Inch Coil– Optional 8 FPI coil availability
Patented ServiceEase Motor Mount– Available on FNH, FNL and FNQ
models
Optional Hinged Venturies– Available on FNH, FNL and FNQ
models
Patented ServiceEase Motor Mount
Optional Hinged Venturi
FN Series has Solutions for Your Serviceability Needs!
12
Optional Side Access Panels– Standard on FNE models
Larger Vent and Drain Connections– 3/8” Flare vent connection– ½” FPT drain connection
Optional Side Access Panel
FN Series has Solutions for Your Application Needs!
13
Unit Construction– High Temperature Motor
• 185F Air Over• FNH Models only
– Totally Enclosed Motors • FNH Models only
– Extended Legs • 30””, 36” or 42”
– Unit Frame• 20” or 42” leg
– Sealtite Wiring– Connection Options
• Threaded Conns• Flanged Conns
– Manifolds (double wide units)
FN Series has Solutions for Your Application Needs!
14
Unit Controls – Fan Cycling (on Lvg Fluid Temp)– Control Transformers (230V, 115V or 24V)– Motor Contactors (Individual and Paired)– Fuses or Circuit Breakers (Individual and Paired)– Motor On/Off Toggle Switches– Thru the door Disconnect (non fused and fused)– Custom Control Panels
FN Series has Solutions to Meet Your Initial Cost Needs!
15
High Performance 1140 RPM Fan Motors– Increased CFM / heat transfer per fan cell
½” Diameter Tube Coil Models– Compact efficient heat transfer surface
Aluminum Fin / Copper Tube Coil Construction
Optional High Density Fin Construction– 12 and 14 FPI Availability
Galvanized Steel Cabinet Construction
F = Fluid Cooler
Vintage N
Motor SelectionH = Standard (1140 RPM, 1½ HP)L = Low noise & energy efficient
(830 RPM, 1½ HP)Q = Quiet, extremely energy
efficient (540 RPM, .5 HP)E = Efficient, variable speed
brushless DC motors
F N H S 04 H 3 08Model Nomenclature
Model Nomenclature
F N H S 04 H 3 08
Total # of Fans 01 ‐ 12
Unit WidthS = Single WideD = Double Wide
Model Nomenclature
F N H S 04 H 3 08
Tube Diameter H = ½” F = 5/8”
Number of Rows2, 3 or 4
Coil Module #01 to 80
19
Product Overview – Model MapFan Config E, 1/2" E, 5/8" H, 1/2" H, 5/8" L, 1/2" L, 5/8" Q, 1/2" Q, 5/8"
1x1 FNE‐S01‐H361 — FNH‐S01‐H301 — FNL‐S01‐H321 — FNQ‐S01‐H341 —1x1 FNE‐S01‐H462 — FNH‐S01‐H402 — FNL‐S01‐H422 — FNQ‐S01‐H442 —1x2 FNE‐S02‐H263 — FNH‐S02‐H203 — FNL‐S02‐H223 — FNQ‐S02‐H243 —1x2 FNE‐S02‐H364 — FNH‐S02‐H304 — FNL‐S02‐H324 — FNQ‐S02‐H344 —1x2 FNE‐S02‐H465 — FNH‐S02‐H405 — FNL‐S02‐H425 — FNQ‐S02‐H445 —1x3 FNE‐S03‐H366 FNE‐S03‐F361 FNH‐S03‐H306 FNH‐S03‐F301 FNL‐S03‐H326 FNL‐S03‐F321 FNQ‐S03‐H346 FNQ‐S03‐F3411x3 FNE‐S03‐H467 FNE‐S03‐F462 FNH‐S03‐H407 FNH‐S03‐F402 FNL‐S03‐H427 FNL‐S03‐F422 FNQ‐S03‐H447 FNQ‐S03‐F4421x4 FNE‐S04‐H368 FNE‐S04‐F363 FNH‐S04‐H308 FNH‐S04‐F303 FNL‐S04‐H328 FNL‐S04‐F323 FNQ‐S04‐H348 FNQ‐S04‐F3431x4 FNE‐S04‐H469 FNE‐S04‐F464 FNH‐S04‐H409 FNH‐S04‐F404 FNL‐S04‐H429 FNL‐S04‐F424 FNQ‐S04‐H449 FNQ‐S04‐F4441x5 FNE‐S05‐H370 FNE‐S05‐F365 FNH‐S05‐H310 FNH‐S05‐F305 FNL‐S05‐H330 FNL‐S05‐F325 FNQ‐S05‐H350 FNQ‐S05‐F3451x5 FNE‐S05‐H471 FNE‐S05‐F466 FNH‐S05‐H411 FNH‐S05‐F406 FNL‐S05‐H431 FNL‐S05‐F426 FNQ‐S05‐H451 FNQ‐S05‐F4461x6 — FNE‐S06‐F367 — FNH‐S06‐F307 — FNL‐S06‐F327 — FNQ‐S06‐F3471x6 — FNE‐S06‐F468 — FNH‐S06‐F408 — FNL‐S06‐F428 — FNQ‐S06‐F4482x2 FNE‐D04‐H272 — FNH‐D04‐H212 — FNL‐D04‐H232 — FNQ‐D04‐H252 —2x2 FNE‐D04‐H373 — FNH‐D04‐H313 — FNL‐D04‐H333 — FNQ‐D04‐H353 —2x2 FNE‐D04‐H474 — FNH‐D04‐H414 — FNL‐D04‐H434 — FNQ‐D04‐H454 —2x3 FNE‐D06‐H375 FNE‐D06‐F371 FNH‐D06‐H315 FNH‐D06‐F311 FNL‐D06‐H335 FNL‐D06‐F331 FNQ‐D06‐H355 FNQ‐D06‐F3512x3 FNE‐D06‐H476 FNE‐D06‐F472 FNH‐D06‐H416 FNH‐D06‐F412 FNL‐D06‐H436 FNL‐D06‐F432 FNQ‐D06‐H456 FNQ‐D06‐F4522x4 FNE‐D08‐H377 FNE‐D08‐F373 FNH‐D08‐H317 FNH‐D08‐F313 FNL‐D08‐H337 FNL‐D08‐F333 FNQ‐D08‐H357 FNQ‐D08‐F3532x4 FNE‐D08‐H478 FNE‐D08‐F474 FNH‐D08‐H418 FNH‐D08‐F414 FNL‐D08‐H438 FNL‐D08‐F434 FNQ‐D08‐H458 FNQ‐D08‐F4542x5 FNE‐D10‐H379 FNE‐D10‐F375 FNH‐D10‐H319 FNH‐D10‐F315 FNL‐D10‐H339 FNL‐D10‐F335 FNQ‐D10‐H359 FNQ‐D10‐F3552x5 FNE‐D10‐H480 FNE‐D10‐F476 FNH‐D10‐H420 FNH‐D10‐F416 FNL‐D10‐H440 FNL‐D10‐F436 FNQ‐D10‐H460 FNQ‐D10‐F4562x6 — FNE‐D12‐F377 — FNH‐D12‐F317 — FNL‐D12‐F337 — FNQ‐D12‐F3572x6 — FNE‐D12‐F478 — FNH‐D12‐F418 — FNL‐D12‐F438 — FNQ‐D12‐F458
Sales Release: October 1st
BFH/RF6/HFS Last Order Estimated December 31st
Lead Times ½” Models: 3 to 4 weeks ex factory 5/8” Models: 4 to 6 weeks ex factory
Important Dates:
20
21
Model Cross ReferenceLARKIN
Single Wide UnitsCurrent Model New FN Model Notes
RF60339 FNH-S02-H203 Configure FNH with 14 FPI
RF60399 FNH-S02-H304
RF60447 FNH-S02-H304 Configure FNH with 14 FPI
RF60525 FNH-S02-H405 Configure FNH with 14 FPI
RF60597 FNH-S03-H306
RF60669 FNH-S03-H306 Configure FNH with 14 FPI
RF60741 FNH-S03-H407 Configure FNH with 12 FPI
RF60797 FNH-S04-H308
RF60893 FNH-S04-H308 Configure FNH with 14 FPI
RF60989 FNH-S04-H409 Configure FNH with 12 FPI
RF61049 FNH-S04-H409 Configure FNH with 14 FPI
RF61131 FNH-S05-H310 Configure FNH with 14 FPI
RF61205 FNH-S05-H411
RF61331 FNH-S05-H411 Configure FNH with 14 FPI
RF61447 FNH-S06-F408 5/8" Model
RF61597 FNH-S06-F408 5/8" Model Configure FNH with 14 FPI
22
Model Cross ReferenceLARKIN
Double Wide UnitsCurrent Model New FN Model Notes
RF60678 FNH-D04-H212 Configure FNH with 14 FPI
RF60798 FNH-D04-H313
RF60894 FNH-D04-H313 Configure FNH with 14 FPI
RF60990 FNH-D04-H414 Configure FNH with 12 FPI
RF61050 FNH-D04-H414 Configure FNH with 14 FPI
RF61196 FNH-D06-H315
RF61280 FNH-D06-H315 Configure FNH with 12 FPI
RF61340 FNH-D06-H315 Configure FNH with 14 FPI
RF61484 FNH-D06-H416 Configure FNH with 12 FPI
RF61594 FNH-D08-H317
RF61788 FNH-D08-H317 Configure FNH with 14 FPI
RF61980 FNH-D08-H418 Configure FNH with 12 FPI
RF62100 FNH-D08-H418 Configure FNH with 14 FPI
RF62262 FNH-D10-H319 Configure FNH with 14 FPI
RF62410 FNH-D10-H420
RF62522 FNH-D10-H420 Configure FNH with 12 FPI
RF62662 FNH-D10-H420 Configure FNH with 14 FPI
RF62892 FNH-D12-F418 5/8" Model
RF63026 FNH-D12-F418 5/8" Model Configure FNH with 12 FPI
RF63194 FNH-D12-F418 5/8" Model Configure FNH with 14 FPI
ProSelect™ Product Selector – Opening Selection
23
Choose ‐1. Brand:
User Preference2. Category:
Fluid Coolers (not selectable on web‐version)
ProSelect™ Product Selector – Opening Selection
Choose ‐1. Brand:
User Preference2. Category:
Fluid Coolers (not selectable on web‐version)
3. Type: Large Sizes
4. Power:60 Hz (default)
5. OK: Click in lower right corner to proceed
ProSelect™ Product Selector – Selection Criteria
25
Choose/Enter ‐1. Style:
Previous Screen2. Data Sheet:
Brief Description3. Unit Quantity:
Number to handle load
4. Voltage: *Power Supply
5. FPI: * (new)8, 10, 12, or 14
6. Max Press Drop:in feet of water
* “No Preference” will increase time to process selections.
ProSelect™ Product Selector – Selection Criteria
26
Choose/Enter ‐7. Max Length:
in inches8. Max Width:
in inches9. Max Height:
in inches10. Max Weight:
in pounds11. Family: *
FNH/L/Q/E
* “No Preference” will increase time to process selections.
ProSelect™ Product Selector – Selection Criteria
27
Choose/Enter ‐12. % Glycol: (new)
0 to 50%13. Glycol Type:
(new) Ethylene or Propylene
14. Altitude:in feet
15. Ent Air Temp:50 to 190°F
ProSelect™ Product Selector – Selection Criteria
28
Choose/Enter ‐16. Fluid Flow:
in GPM17. Ent Fluid Temp:
60 to 200°F18. Lvg. Fluid Temp.:
in °F*19. System Load:
in BTUH**
* If Lvg Fluid is entered, System Load is calculated.**If System Load is entered, Lvg Fluid is calculated.
ProSelect™ Product Selector – Equipment
29
Choose/Enter ‐1. Selection Range:
15 to 300%2. Refresh:
click to refresh3. Equip Window:
Scroll bars to see more selections
Click on model to select (shown at bottom)
Sound data new
ProSelect™ Product Selector – Options
30
Choose ‐1. Options:
Additional new options similar to NTC.
2. Coil: FPI and protection are combined. Bronz Glow tobe entered as Custom Option.
3. Fan Cycling: select contactor first for FNH, FNL and FNQ models
4. Rules: Options do have rules associated.
QUESTIONS
31