flygt dewatering pumps

Flygt dewatering pumps

3

Contents

Flygt submersible dewatering pumps; 2600 series .......................................6 2000 series ..................................... 11 2700 series .....................................18 Ready series ...................................22 Accessories ................................26-29

Introduction .....................................4

Flygt self-priming pumps ..............30 Accessories ...................................34

4 Flygt dewatering pumps, 50 Hz

Whether digging down deep, moving mountains, or dealing with torrential downpours, you’re bound to hit water.

And when you do, you’ll find reliable Flygt pumps hard at work. No wonder. Managing groundwater, storm water and wastewa-ter problems have been one of our areas of expertise since we intro-duced the world’s first submersible dewatering pump in 1947.

Where there’s water, we’re there, too

Sixty years later and still going strong, ITT Water & Wastewater is the leading global supplier of dewatering equipment. Renowned for robust and reliable operation, our mobile pumps are found at con-struction, mining, industrial or municipal sites the world over.

The secret behind our success? A true commitment to custom-er needs. We offer total solutions, which include quality products backed by vast expertise and knowledge about dewatering applica-tions.

What’s more, we constantly improve our products to meet your demands for safe, reliable operation while providing the lowest pos-sible total cost of ownership.

That is why our easy-to-use, easy-to-install pumps get the job done quickly, efficiently and cost-effectively – even under the most challenging conditions.

5

Flygt

Flygt dewatering pumps, 50 Hz

Mining/QuarryingFor dewatering and drainage of underground or open-pit mines.

Moving thousands of cubic meters of water per day from one location to another is a vital task. This displacement of water, or dewatering, is a process that is essential to a broad range of industries like mining, quarrying, construction, tunneling and to municipal uses.

Dewatering helps build roads and bridges, extract natural resources, recycle industrial process water, remedy flooding problems and solve a host

of other fluid handling challenges.At the heart of the dewatering system is a

pump, or series of pumps, working in conjunction with pipes, screens, temporary holding dams or tanks, and other devices to accomplish the task at hand.

Here are a few examples of typical dewatering situations for various industries:

Construction/TunnelingFor lowering groundwater and displacing stormwater.

Whatever your needs, you can rely on Flygt pumps as reliable and cost-effective components for any dewatering solution. Our comprehensive range of dewatering pumps gives you ultimate control over

all types of fluids. Flygt portable pumpscover virtually every size, pressure, flow rate and functionality. You can be sure that we can tailor the right dewatering solution to meet your needs.

Ultimate control over all types of fluids

Other industries For dewatering and pumping tasks such as handling runoff water, moving effluent from industrial ponds and loading and unloading ship ballast water.

Municipal uses For removal of stormwater, groundwater and floodwater or for emptying tanks before maintenance.


Mining and quarryingThe clear choice for dewatering and drainage applications in underground or open pit mines.

Construction and tunnelingIdeal for active or passive dewatering of groundwater or stormwater, the port able 2600 series moves easily from one task to another at any construc-tion site.

Industrial usesWell suited for temporary duties, the 2600 series handles coal pile runoff, tailing ponds at power stations, treated

When tough environments are the norm

2600 series

Radically engineered for durabil-ity. Tough under pressure. Better performance from a pump in this class is hard to find.

The Flygt 2600 submersible pumps stand up under the harsh-est conditions. These revolution-ary pumps work harder and last longer than traditional pumps.

In fact, the 2600 series is over three times more wear-resistant, thanks to its patented DuraSpin™ hydraulic system, fewer compo-n ents, new materials and ergo-nomic design.

These low-maintenance pumps just keep going, delivering the uptime you need to succeed and the lowest total cost of ownership.

paper-mill effluent, fish-farm water and ship ballast water.

Municipal usesThese lightweight, portable pumps re -move stormwater or ground water from manholes and dry wells, empty tanks or pump sumps for servicing and easily tackles all types of emergency drainage.

7

Flygt


Spin-Out™ Unique to Flygt pumps, this patented design minimizes clogging, protects the outer seal and extends service life by ex-pelling abrasive particles from the seal.

Plug-In™ seal This unique easy-to-service seal incor-porates two mechanical seals for double protection against liquid penetration and protects seal surfaces during mounting and disassembly.

Technical dataProtection category: IP 68Maximum temperature: 40 °C

Material:Cooling jacket:

2630-2670 stainless steel2610-2620 cast aluminium

Stator casing:2610-2620 stainless steel2630-2660 cast aluminium2670 grey cast iron

Shaft and strainer: stainless steelImpeller: hard ironSuction cover: hard iron (Dura-Spin™)Diffuser & O-rings: nitrile rubber

Zinc anodes:All pumps of this series can be equipp ed with a sacrificial anode for protection against bimetallic corrosion.

Custom versions:Special voltages and modifications at extra cost are available upon request.

Wear resistant dewatering pumpsSix pumps in the Flygt 2600 series give you the possibility to achieve far above average performance.

With flow rates of up to 90 l/s, these versatile pumps are perfect for large or small scale applications where minimal clogging is a must.

Performance curves

Characteristics/benefits

New closed B-impeller withDura Spin™This hydraulic system minimizes impeller wear, thus increasing durability. Spiral grooves on the suction cover and back vanes on the impeller prevent abrasive particles from reaching the impeller neck.

K-impellerSpecially designed for high efficiency and wear resistance, this hard iron impeller minimizes clogging when pum-ping abrasive water containing large soft particles.

m

Q

l/s

H

0

10

20

30

40

50

60

70

0 5010 20 60 70 80 90 1004030

2670 HT B2512630 HT B251

2670 MT B2262630 MT B266

2660 HT B2512630 MT K234

2660 MT B2262620 MT B226

2660 MT K2342620 MT B234

2640 HT B2512620 MT K233

2640 MT B2262610 MT K234

2640 MT K2342610 MT K237

2610 MT K243


2600 series

2610.170

2600 series

2620.170

|< >|195 mm

|<

>|

594

mm

|< >|240 mm

|<

>|

617

mm

Technical data K 237 MT K 234 MT K 243 MT

Rated power [kW]Voltage [V/phase]Rated current [A]Weight [kg]Max height [mm]Max width [mm]Discharge [inch]Strainer hole [mm]Warm liquid, 70 °C

1.3 1.2 0,85230, 1~ 400, 3~ 230, 1~7.2 2.7 5,121.5 19 19594 594 594195 195 1952 2 26x13.5 alt. 40x18 6x13.5 alt. 40x18 6x13,5 alt. 40x18Yes Yes Yes

Technical data K 233 MT K 234 MT B 226 MT


1.5 2.2 2.2230, 1~ 400, 3~ 400, 3~8.4 4.7 4.728 28 30617 617 617240 240 2403 3 37x16 alt. 55x23 7x16 alt. 55x23 7x16Yes Yes Yes

m

Q

l/s

H

0

2

4

6

8

10

12

14

16

18

20

0 102 4 141286

K243 K237

K234

m

Q

l/s

H

0

5

10

15

20

25

0 10 12 14 16 182 4 2086

B226 MT

K234 MT

K233 MT

9

Flygt


2600 series

2630.180

2600 series

2640.180

|< >|286 mm

|<

>|

759

mm

|< >|286 mm

|<

>|

759

mm

Technical data K 234 MT B 226 MT B 251 HT


3.7 3.7 3.7400, 3~ 400, 3~ 400, 3~6.7 6.7 6.749 49 49759 759 759286 286 2864 4 38x18 8x18 8x18Yes Yes Yes



5.6 5.6 5.6400, 3~ 400, 3~ 400, 3~11 11 1151 51 51759 759 759286 286 2864 4 38x18 8x18 8x18Yes Yes Yes

m

Q

l/s

H

0

5

15

20

10

25

35

30

40

0 25 30 355 10 402015

K234 MT

B251 HT

B226 MT

m

Q

l/s

H

0

5

10

15

20

25

30

35

40

50

45

0 25 30 35 405 10 452015

K234 MTB251 HT

B226 MT


2600 series

2660.180

2600 series

2670.180

|< >|395 mm

|<

>|

955

mm

|< >|346 mm

|<

>|

853

mm



10 10 10400, 3~ 400, 3~ 400, 3~19 19 1978 78 78853 853 853346 346 3466 6 49x18 9x18 9x18Yes Yes Yes

Technical data B 226 MT B 251 HT


18 18400, 3~ 400, 3~32 32140 140955 955395 3956 410x20 10x20Yes Yes

m

Q

l/s

H

0

10

20

30

40

50

60

0 70302010 40 806050

B251 HT

B226 MT K234 MT

m

Q

l/s

H

0

10

20

70

60

50

40

30

0 50 60 70 80 9010 20 1004030

B251 HT

B226 MT

11

Flygt


When versatility is vital

2000 series

Industrial usesThe Flygt 2000 series handles a wide range of industrial tasks including sprinkling, irrigation, drainage, dewa-tering and pumping of wastewater, spray water, rainwater, cooling water, seawater, foul water and muddy water.

Mining Perfect for large mining projects, such as iron ore, gold, coal and minerals, the 2000 series works efficiently for tough drainage and dewatering tasks.

Municipal usesA mobile multipurpose pump, the 2000 series goes to work at local util-ity and telecom construction sites and are ideal for emergency drainage.

Construction and tunnelingLarge infrastructure projects, including building roads, railways and airports, are typical examples of environments for the 2000 series. These pumps are also well suited to small to medium-sized construction projects, such as building power stations or dams.

Versatile, really robust and defi-nitely mobile. Broad demands like these require reliable pumps that easily adapt to various working conditions.

The Flygt 2000 submersible pumps stand up to any type of job in virtually any position – rightside up, upside down, side-ways or angled.

These wear-resistant pumps handle chemically aggressive, mechanically abrasive or highly vis-cous fluids laden with particles. On top of all that, they’re safe for dry running and snoring operation.

When you need a good all-around player, you’ll find that the Flygt 2000 series plays hard.


Specially designed impellers Manufactured in hardened cast iron, Flygt impellers are spe-cially hardened to HRC 60 to ensure excellent wear-resis-tance, long service life and lower maintenance costs.

Spin-Out™ Unique to ITT Flygt, this patented design protects the outer seal and extends the service life by expelling abrasive particles from the seal.

Double axial face seals Made of WCCR (corrosion resistant cemented carbide), these specially designed face seals protect the pumps against the ingress of liquids.

Protection category: IP 68, Maximum temperature: 40˚C Material according to DIN:Aluminium

2071.010Impeller .....................Hardened steelStator casing .............AluminiumStrainer .....................Cast ironShaft .........................Stainless steel

2125.181Impeller .....................Hard ironStator casing .............AluminiumStrainer .....................Galvanised steelShaft .........................Stainless steel


Large drainage pumps for tough environmentsWith capacities of up to 300 l/s, Flygt 2000 series handles big jobs with ex-treme efficiency.

Eight pumps are available in two casing materials: lightweight alumin-ium for heavy construction sites and mines and durable cast iron for corro-sive environments.

These highly efficient, low main-tenance pumps are exactly what you need to deal with large jobs that require flexible dewatering solutions.



Material according to DIN:Cast iron

All cast iron pumps are also availible as explosion proof, EEx DI and EExDII.

2075.324Impeller .....................Hardened steelStator casing .............Cast ironStrainer .....................Galvanised steelShaft .........................Stainless steel

2201.320Impeller .....................Hard ironStator casing .............Cast ironStrainer .....................Galvanised steelShaft .........................Stainless steel



Technical data

13

Flygt


Performance curves

m

Q

l/s

H

0

10

20

30

40

50

60

70

80

90

100

0 25050 100 300200150

2071 MT 211 2071 MT 231 2125 HT 233 2201 MT 243 2201 MT 231 2201 LT 411 2250 HT 233 2250 MT 231

m

Q

l/s

H

0

50

100

150

200

250

0 20 40 60 80 100 120 140 160 180

2075 HT 233 2075 MT 231 2201 HT 243 2075 ST 271 2125 HT 233 2125 MT 231 2201 MT 231 2400 HT 243 2400 MT 231


2000 series

2071.010

2000 series

2075.324

|< >|185 mm

|<

>|

705

mm

|< >|310 mm

|< >|max 430 mm

|<

>|

575

mm

Technical data B 211 LT B 231 MT


3 3400, 3~ 400, 3~6.3 6.328 28705 705185 18575 (3”) 75 (3”)8x50 8x50Yes Yes

Technical data B 231MT B 233 HT B 271 ST


3.7 3.7 5.5400, 3~ 400, 3~ 400, 3~7.1 7.1 1173 73 90565 565 575430 410 380100 (4”) 75 (3”) 100 (4”)8x8 8x8 8x50Yes Yes Yes

m

Q

l/s

H

0

30

10

40

50

60

70

20

80

0 5 10 252015

B231 MT

B271 ST

B233 HT

m

Q

l/s

H

0

15

5

20

25

30

35

10

40

0 2 4 168 10 12 146

B211 LTB231 MT

15

Flygt


|< >|max. 470 mm

|<

>|

845

mm

|< >|360 mm

2000 series

2125.181

Technical data B 233 HT


8400, 3~158984547075 (3”)6x50No

m

Q

l/s

H

0

10

30

40

20

50

70

60

80

0 403010 8070605020

B 233 HT

2000 series

2125.320



8 8400, 3~ 400, 3~15 15150 165830 830485 465100 (4”) 75 (3”)6x50 6x50No No

m

Q

l/s

H

0

10

30

40

20

50

70

60

80

0 403010 8070605020

B 233 HT

B 231 MT

|< >|max. 485 mm

|<

>|

830

mm

|< >|360 mm


2000 series

2201.011

2000 series

2201.320MT HT

|< >|500 mm

|< >|434 mm

|<

>|

1270

mm

|<

>|

1050

mm

HT

|<

>|

1045

mm

|< >|430 mm

|<

>|

1302

mm

|< >|500 mm

MTLT

Technical data B 411 LT B 231 MT B 243 HT


30 37 37400, 3~ 400, 3~ 400, 3~57 65 65280 280 2401302 1302 1045500 500 430200 (8”) 200 (8”) 100 (4”)15x45 15x45 10x10No No No



37 37400, 3~ 400, 3~65 65460 3501270 1050500 434200 (8”) 100 (4”)15x45 10x10Yes Yes

m

Q

l/s

H

0

70

10

90

80

20

30

40

50

60

100

0 50 100 250200150

B231 MT

B411 LTB243 HT

m

Q

l/s

H

0

10

20

30

40

50

60

70

80

90

100

0 100 120 140 16020 40 1808060

B233 HTB231 MT

17

Flygt


2000 series

2250.011

2000 series

2400.402

|< >|770 mm

|< >|max 940 mm

|<

>|

1260

mm

MT

|< >|1180 mm

|< >

|770 m

m

|<

>|

1245

mm

|< >|720 mm

HT



54 54400, 3~ 400, 3~101 101540 5401260 1260940 860250 (10”) 150 (6”)15x45 15x45No No



90 90400, 3~ 400, 3~149 149900 9851180 1245770 720150 (6”) 100 (4”)10x10 10x10No No

m

Q

l/s

H

0

20

30

10

40

60

50

70

0 25050 100 300200150

K431 MT

B433 HT

m

Q

l/s

H

0

50

100

150

200

250

0 100 120 140 16020 40 1808060

B243 HT

B231 MT


When the extreme is the ordinary

2700 series

Mining and quarryingThe 2700 series is ideal for acid mine drainage and other mining tasks that involve exposure to corrosive or abra-sive liquids.

Industrial useThe 2700 series is well suited for work at power stations, paper mills and chemical plants. It even handles wash water sumps in pickling bath processes and pH-neutralization for the steel industry.

Corrosive liquids. Abrasive liq-uids. Great variances in pH levels. Extreme environments like these call for pumps that can handle more than the ordinary.

The Flygt 2700 submersible pumps are definit ely up to the task. These pumps are ideal for dewatering applications in mines, power stations, paper industries, steel mills, and chemical indus-tries.

A stainless steel construction enables the 2700 series to operate reliably under harsh conditions, unfazed by alkalis, acids and other aggressive media. This reduces the risk of pump failure and un plan-ned downtime. It also helps keep repair costs to a minimum.

For reliable pump performance in the toughest operating envi-ronments, count on the Flygt 2700 series to get the job done.

Municipal useFor utility drainage on landfill sites or at drainage of corrosive liquids at power stations, the 2700 series is up to the task.

19

Flygt


Drainage pumpsHandle lightly con-taminated liquids.Available in both high head and high flow versions.

Technical data

BS 2700.390 B-HydraulicsProtection category: IP 68Maximum temperature: 40 °C

Material in accordance with EN:Impeller ............Stainless steel type 316Casted parts .....Stainless steel type 316Cooling jacket ...Stainless steel type 316Shaft .................Stainless steel type 329Diffuser ..................... Nitrile rubber NBROil casing bottom ..... Nitrile rubber NBRO-rings .................................FPM (Viton)

DS 2700.280 D-HydraulicsProtection category: IP 68Maximum temperature: 40 °C

Material in accordance with EN:Impeller ............Stainless steel type 316Casted parts .....Stainless steel type 316Cooling jacket ...Stainless steel type 316Shaft .................Stainless steel type 329Wear protection ....... Nitrile rubber NBRO-rings .................................FPM (Viton)

Corrosion resistant dewatering pumps

Performance curves


Stainless steel impellerTailored to work efficiently for long pe-riods of time in extreme environments.

Double mechanical shaft seals Work independently of each other and protect against liquid penetration.

0

10

20

30

40

50

60

70 m

Q

0 10 20 30 40 50 60l/s

H

BS 2750 HT

BS 2740 HT

BS 2750 MT

BS 2740 MT0

5

10

15

20

25

30 m

Q

0 5 10 15 20 25 30 35 40l/s

H

DS 2740

DS 2730

0

10

20

30

40

50

60

70 m

Q

0 10 20 30 40 50 60l/s

H

BS 2750 HT

BS 2740 HT

BS 2750 MT

BS 2740 MT0

5

10

15

20

25

30 m

Q

0 5 10 15 20 25 30 35 40l/s

H

DS 2740

DS 2730

Solids handling pumpsHandle heavily contaminated liq-uids with particles up to 80 mm.

Choose from a range of pumps made of stainless steel for greater dur ability and longer service life.

The Flygt 2700 series consists of three drainage pumps to handle light-ly contaminated liquids and three sol-ids hand ling pumps for heavily con-taminated liquids. Ideal for pH values between 2 and 10, these pumps are tough enough to handle both highly acidic and highly alkaline media.

Whatever your needs, you’ll find a 2700 series pump to match the de-mands of the job.


2700 series

BS 2740.390

|< >|280 mm

|<

>|

725

mm

2700 series

BS 2750.390|< >|

277 mm

|<

>|

782

mm



8 8400, 3~ 400, 3~15 1590 90782 782277 2774 325x7 25x7No No

m

Q

l/s

H

0

5

10

15

20

45

30

40

35

25

0 5 10 15 20 25 30 35 4540

2740 HT 2740 MT

m

Q

l/s

H

0

10

20

30

40

50

60

70

0 2010 40 5030 60

2750 HT

2750 MT



6,3 6,3400, 3~ 400, 3~12 1275 75725 725280 2804 327x7 27x7No No

21

Flygt


2700 series

DS 2730.280 MTDS 2740.280 HT

|< >|455 mm

|<

>|

845

mm

Technical data D 441 MT D 243 HT

Rated power [kW]Voltage [V/phase]Rated current [A]Weight [kg]Max height [mm]Max width [mm]Discharge [inch]Throughlet [mm]Warm liquid, 70 °C

4,1 6,3400, 3~ 400, 3~8,8 1295 120845 845455 4554 380 46No No

m

Q

l/s

H

0

10

15

5

20

25

0 5 10 15 20 25 30 35 40

DS2740DS2730


When power and portability means you’re prepared

Ready series

Construction site For on-the-spot flooding and clean-up jobs, the Ready series goes straight to work at any construction site. These high-quality pumps with smaller dimensions make easy work of removing water.

Industrial useHandles contaminated water and water containing gravel and debris at a wide variety of industrial sites. Ideal as a stand-by pump for emergency situations in industrial facilities.

Municipal useA perfect pump to keep in service cars used by public utilities companies, rescue services and fire departments. Well suited for emergency drainage on access roads, cable manholes and flooded basements.

Truly durable. Packed with power. Easy to use and maintain. When you expect to deal with the unex-pected these robust portable pumps are ready for action.

The Flygt Ready submersible pumps deliver a powerful mobile solution without weighing you down. In fact, pumping power has never been this lightweight or economical.

Impact-resistant from the inside out, the Ready series easily han-dles aggressive fluids mixed with sand and gravel.

Weighing between 10 and 15 kilos (22 to 33 lbs.), the Ready series is perfect when small, but powerful, just makes sense. Take a little confidence with you wher-ever you go.

23

Flygt


Technical data

BS 2004.211 / BS 2008.211Protection category: IP 68Maximum temperature: 35 °C

MaterialImpeller .....................PolyurethaneOuter casing ..............Stainless steelWear parts .................PolyurethaneStator housing ...........Stainless steelStrainer ......................EPDM rubberShaft ..........................Stainless steelO-rings .......................Nitrile rubber

DS 2008.280Protection category: IP 68Maximum temperature: 35 °C

MaterialImpeller .....................PolyurethaneOuter casing ..............Stainless steelWear parts .................PolyurethaneStator housing ...........Stainless steelPump housing ...........PolyurethaneShaft ..........................Stainless steelO-rings .......................Nitrile rubber

Lightweight mobile dewatering pumps

Performance curves


Auto-CutAutomatically switches off the power to prevent overheating when temper-atures rise.

Plug-in cableInnovative, easy-to-replace plug-in con-nector lets you change cables in just a few seconds. SOW type with mold-ed 15-amp plug. Plug-in connector also prevents leakage in case of dam-aged cable.

Hea

d

16

14

12

10

8

6

4

2

0

Ready 4

Ready 8

Ready 8S

Capacity

0 1 2 3 4 5 6 7

m

l/s

Hydraulic partsMade of highly wear resistant poly-urethane, all hydraulic parts withstand extreme wear and tear and ensure reli-able operation and longer service life.

Pump housing Ready 8SPolyurethane casing on the Ready 8S is ideal for solids handling and corrosive environ ments.

Ready 4 and 8 Ready 8S

A

B

DC

A C

DB

The Ready seriesThree little pumps give you a big dose of confidence to handle fluids with contaminants, abrasive particles, sand and gravel.

Sturdy, yet lightweight, the Ready series is designed for continuous operation for fluids with pH values between 3 and 9. The Ready 8S is spe-cifically designed for solids handling.

For unprecedented power, ergo-nomically packaged, to take with you anywhere, just get Ready.


Ready series

BS 2004.211

Ready series

BS 2008.211

|< >|185 mm

|<

>|

400

mm

|< >|185 mm

|<

>|

400

mm

m

Q

l/s

H

0

2

12

6

10

8

4

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.54.0

B 200 MT

m

Q

l/s

H

0

2

16

14

12

6

10

8

4

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 5.04.54.0

B 200 MT

Technical data B 200 MT


0,75230, 1~4,212,5400185211x5No



0,4230, 1~2,710400185211x5No

25

Flygt


Ready series

DS 2008.280

|< >|200 mm

|<

>|

510

mm

m

Q

l/s

H

0

2

12

6

10

8

4

0 1 2 3 4 5 6 7

B 200 MT


Rated power [kW]Voltage [V/phase]Rated current [A]Weight [kg]Max height [mm]Max width [mm]Discharge [inch]Throughlet [mm]Warm liquid, 70 °C

0,9230, 1~5,215510280238No


When proper function and high performance count

Accessoriesfor Flygt submersibles

Hoses, cables and startersFor quality connections, count on Flygt equipment. We equip every pump with our first-class Flygt Subcab™ power and monitoring cable. We also offer port able manual starters for convenient outdoor use. A variety of options, including outlet types for hose connection, quick couplings and Victaulic components, is available.

To match the quality and perfor-mance of your pump, we can also supply discharge hoses and couplings in the sizes to fit your needs.

Mechanical accessoriesUse our wide range of mechanical accessories to adapt your pump to your specific needs.

Make your submersible pumping experience complete with Flygt accessories, specifically designed to meet your needs. Here you’ll find everything you require to maximize pump performance and minimize costs.

From hoses and cables to pump floatation modules and electronic pump controllers, Flygt helps you get the best out of your equipment. Whatever you need, we’ve got it.

For the best performance from top-quality Flygt pumps, rely on our best-in-class accessories. Plus we deliver to your doorstep with the speed and reliability that are now hallmarks of Flygt service.

For pumping near the surface, we offer compact lightweight floatation modules. When you need to pump all the way down to the floor, you can rely on Flygt low suction collars. For protection against galvanic corrosion, we offer zinc anode sets.

Or for series connection of pumps in high head applications, choose from our selection of tandem connections.

Handling equipmentFor extra stability of our slim compact pumps, choose one of our wide bases

for steady upright operation. Optional handles for forklift transportation of the pump are also availabe to lighten your load.

Electrical accessories Automating operations saves energy and reduces pump wear. With the Flygt FPC100 electronic pump con-troller, simply start and stop pump operations without any sensors. Flygt automatic start equipment with dif-ferent types of level regulators is also available.

27

Flygt


The Flygt submersible dewatering pump can be supplied with five different outlets:•Hoseconnection•Threadedconnection•Threadedconnectionwithquickcoupling,e.g.typeStorzorGuillemin•Victaulicconnection

Complete hose units and components include qualities and sizes to suit the pump and the conditions:•Rubberhoseforlongserviceintoughapplications•PVChose•Hoseclamps•Joiningpipes•StorzandGuilleminquickcouplings

When using Victaulic connection the following components are available:•Coupling•Flangeforpipeconnection•Hoseconnection•90°bend

Flygt Subcab™ power cable with superior toughness for long life on-site.

Flygt START manual starters with a port able, practical design for outdoor use.

Flygt START 350 for D-O-L start of pumps without built-in thermal contact supervision.•Currentrange1-25A•Voltage0-500V

Flygt START 351, for D-O-L start of pumps with built-in thermal contact supervision.•Currentrange1-32A•Voltage0-500V

Flygt AST three-phase starters for manual operation of one pump. AST starters include a main supply switch with short-circuit and motor over-load protection. For pumps with built-in thermal contact supervision.•Currentrange0-100A•Voltage380-415V

Hoses, cables and starters


Mechanical accessories

Flygt pump floatsThe new pumps floats have been developed as an alternative the more traditional steel floats. The lightweight floating body is manufactured of glass fibre reinforced polymer material and foamed inside.

The Flygt low suction unitMakes it possible for the pump to remove water right down to the floor. It is used e.g. by the fire brigade to empty flooded basements.

Flygt zinc anode kitsDesigned for long service life and easy inspection. Zinc anodes protect the pump from galvanic corrosion, e.g. in sea water.

Flygt tandem connectionConnects two or more pumps in series for extra high head operation. The connec-tions are identical to those of the pump outlet, i.e. for hose, thread, quick cou-plings or Victaulic.

Check valvesFor preventing backflow to ensure efficient pumping for pumps with start/ stop regulation. Threaded 2”, 3” and 4” light weight check valves.

Handling equipment

The Flygt wide baseGives the narrow Flygt 2600 pump a wide, extra stable base.

Flygt handleFor easy handling of the pump, e.g. with a fork lift.

The Flygt lifting wireHandy for lowering Flygt pump models 2610 and 2620 vertically down narrow pipes. Larger pump models have space for a standard lifting sling.

29

Flygt


Electrical accessories

The BD level control unitsDesigned to be used in combination with a manual starter in applications where automatic operation by level switches is needed. It is complete with level sensor and contactor.

Flygt ENM-10 level sensor switchWith tilting, non-floating function – easy to use and has a proven long term reli-ability. The Flygt ENM-10 is made of environmentally friendly materials.

Flygt NF-5 level float switchWith on/off function at two separate levels.

Electronic control unitThe FPC100 is a unique electronic control unit, which has to be fitted in the con-trol panel. Flygt FPC100 has the ability to stop the pump the moment it starts to draw air, a condition called ‘snoring’. Restart occurs after calculated time based on the previous running cycle and is adapted to the current inflow.

Flygt AST three-phase starters (see page 27) can also be used with the ENM-10 lev-el regulator for automatic operation of the pump.

Flygt BCD 4 portable D-O-L starterFor automatic or manual operation of small 3-phase pumps with built-in thermal contacts. For automatic operation with one level switch type NF 5.•Currentrange0-8A•Voltage380-415V


A wide range to suit your needsWe offer a range of models from 2” to 10” that use different types of engines and can be mounted on trailers with tyres or on skids according to your needs.To meet any noise limitation require-ments, our pumps come in optional super-silent, sound-attenuated models. They have high quality, easy access covers for both engine and pump. (63dB at 7 metres) Engine-silenced models are also available. Our wide range is the result of more than 30 years of experience in dewa-tering and lowering water table levels, world-wide.

As a solution provider, ITT Water & Wastewater has a wide range of extremely versatile self-priming pumps for all applications connect-ed with drainage, dewatering or lowering of the water table.

Our extensive offer of robust self-priming pumps ensures that you can always find a reliable solution for all heavy-duty dewa-tering applications, whether you intend to dewater sites or drain excavations, submerged sites or flooded land. All our self-priming pumps are easy to transport and therefore excellent to use any-where you need to move dewatering liquids.

Typical applications include:• Civil engineering and construction

site dewatering• Ground working • Temporary and emergency

dewatering• Mine and quarry pumping• Screened sewage over-pumping/

bypass operations

Features and benefits:• Reliable, robust and efficient solutions of the highest quality• Extremely versatile products for

general drainage use and lowering of the water table

• Wide range of formats: diesel, petrol or electric power units, skid- or wheel-mounted

• High hydraulic efficiency• Reduced noise levels – super-

silenced models available (63dB at 7 metres)

• Environmentally friendly solutions• Low maintenance

Reliable solutions for heavy-duty applications

Self-priming pumps

31

Flygt


Self-priming pumps for general dewatering

BWS

Diesel/Petrol BWS 50 BWS 50 BWS 75 BWS 75 BWS 100* BWS 150* BWS 200 BWS 250*

Discharge diam. (mm/inch”) 50 (2”) 50 (2”) 80 (3”) 80 (3”) 120 (4”) 150 (6”) 200 (8”) 250 (10”)Rated power (kW) 4.1 3.7 4.7 5 7.5/23.5 18.4/27.5 27.5 36Weight (kg) 68 41 145 124 340/527 780/847 847 1129Length (m) 0.87 0.85 0.95 0.95 0.95/1.30 1.65 1.65 1.65Width (m) 0.60 0.45 0.60 0.60 0.85/1.12 1.35 1.35 1.35Height (m) 0.70 0.64 0.80 0.80 1.05/1.33 1.55 1.55 1.60Supply Diesel Petrol Diesel Petrol Diesel Diesel Diesel Diesel

35

30

25

20

15

10

5

0

1: BWS 502: BWS 753: BWS 1004: BWS 1505: BWS 200 6: BWS 250 18.5 kW 7: BWS 250 30 kW

45

40

35

30

25

20

15

10

5

00 2000 4000 6000 8000 10000 12000 l/min

m

m

0 120 240 360 480 600 720

1: BWS 502: BWS 753: BWS 100 7.5 kW4: BWS 100 23.5 kW5: BWS 150 18 kW6: BWS 150 27.5 kW7: BWS 2008: BWS 250

1 2 3

4 56

71

2

3 4 5 6 78

0 2000 4000 6000 8000 10000 12000 l/min

0 120 240 360 480 600 720m3/h m3/h

35

30

25

20

15

10

5

0

1: BWS 502: BWS 753: BWS 1004: BWS 1505: BWS 200 6: BWS 250 18.5 kW 7: BWS 250 30 kW

45

40

35

30

25

20

15

10

5

00 2000 4000 6000 8000 10000 12000 l/min

m

m

0 120 240 360 480 600 720

1: BWS 502: BWS 753: BWS 100 7.5 kW4: BWS 100 23.5 kW5: BWS 150 18 kW6: BWS 150 27.5 kW7: BWS 2008: BWS 250

1 2 3

4 56

71

2

3 4 5 6 78

0 2000 4000 6000 8000 10000 12000 l/min

0 120 240 360 480 600 720m3/h m3/h

Electrical BWS 50 BWS 50 BWS 75 BWS 100 BWS 150* BWS 200 BWS 250*

Discharge diam. (mm/inch”) 50 (2”) 50 (2”) 80 (3”) 120 (4”) 150 (6”) 200 (8”) 250 (10”)Rated power (kW) 2.2 2.2 4.0 7.5 11 30 18.5/30 Weight (kg) 39 39 115 255 541 608 843/889 Length (m) 0.85 0.85 0.95 0.95 1.40 1.40 1.60 Width (m) 0.45 0.45 0.60 0.83 1.05 1.05 1.35 Height (m) 0.64 0.64 0.80 1.05/1.33 1.26 1.26 1.60 Supply 1~ 3~ 3~ 3~ 3~ 3~ 3~

1~ = 1-phase 230V 50 Hz3~ = 3-phase 400V 50 Hz

* Other performances available on request.

BWS Diesel/Petrol BWS Electrical


Centrifugal self-priming vacuum-assisted pumps

BWV

Diesel BWV 75 BWV 100* BWV 150* BWV 200 BWV 250*

Discharge diam. (mm/inch”) 80 (3”) 120 (4”) 150 (6”) 200 (8”) 250 (10”)Rated power (kW) 5.8 9.6/23.5 18.4/27.5 27.5 36Weight (kg) 270 450/580 929/1036 1036 1373Length (m) 0.95 1.30 1.65 1.65 1.65Width (m) 0.85 1.10/1.15 1.35 1.35 1.35Height (m) 1.20 1.4/1.50 1.72/1.82 1.82 1.82Supply Diesel Diesel Diesel Diesel Diesel

Electrical BWV 75 BWV 100 BWV 150* BWV 200 BWV 250*

Discharge diam. (mm/inch”) 80 (3”) 120 (4”) 150 (6”) 200 (8”) 250 (10”)Rated power (kW) 5.5 7.5 11 30 18.5/30 Weight (kg) 215 340 615 713 985/1006 Length (m) 0.75 1.12 1.40 1.40 1.60 Width (m) 0.90 0.85 1.05 1.05 1.35 Height (m) 1.15 1.30 1.71 1.71 1.82 Supply 3~ 3~ 3~ 3~ 3~

3~ = 3-phase 400V 50 Hz


Diesel driven DWV NWV

Electric DWV NWV

Discharge diam. (mm/inch”) 80 (3.15”) to 200 (8”) 100 (4”) to 150 (6”)Rated power (kW) 10.2 to 49 18.4 to 36Max head (m) and Flow (l/min) 24/8250 27/3900

Discharge diam. (mm/inch”) 80 (3.15”) to 200 (8”) 100 (4”) to 150 (6”)Rated power (kW) 10.2 to 45 15 to 30Max head (m) and Flow (l/min) 23/7800 26/7500

35

30

25

20

15

10

5

0

1: BWV 752: BWV 1003: BWV 1504: BWV 200 5: BWV 250 18.5 kW6: BWV 250 30 kW

45

40

35

30

25

20

15

10

5

0

1: BWV 752: BWV 100 9.6 kW3: BWV 100 23.5 kW4: BWV 150 18 kW5: BWV 150 27.5 kW6: BWV 2007: BWV 250

12/3 4

56

1

2 3 4 5 67

0 2000 4000 6000 8000 10000 12000 l/min

0 120 240 360 480 600 720

0 2000 4000 6000 8000 10000 12000 l/min

0 120 240 360 480 600 720

m

m

m3/h m3/h

BWV Diesel

35

30

25

20

15

10

5

0

1: BWV 752: BWV 1003: BWV 1504: BWV 200 5: BWV 250 18.5 kW6: BWV 250 30 kW

45

40

35

30

25

20

15

10

5

0

1: BWV 752: BWV 100 9.6 kW3: BWV 100 23.5 kW4: BWV 150 18 kW5: BWV 150 27.5 kW6: BWV 2007: BWV 250

12/3 4

56

1

2 3 4 5 67

0 2000 4000 6000 8000 10000 12000 l/min

0 120 240 360 480 600 720

0 2000 4000 6000 8000 10000 12000 l/min

0 120 240 360 480 600 720

m

m

m3/h m3/h

BWV Electrical

Vacuum assisted pumps for solids handling and sewage by-pass

DWV & NWV

33

Flygt


Diaphragm pumps

BWM Diesel/Petrol/Electric

Self-priming pumps for general and emergency services dewatering

BWJ, BWL and BWF

5

10

15

20

00 100 200 300 400 500 600 700 800 9000 6 12 18 24 30 36 42 48 54

1: BWM 502: BWM 753: BWM 100 Electrical4: BWM 100 Diesel/Petrol5: BWM 150

432

51

l/min

m

m3/h

Diesel/Petrol BWM 50 BWM 75 BWM 75 BWM 100 BWM 100 BWM 150

Discharge diam. (mm/inch”) 60 (2”) 80 (3”) 80 (3”) 100 (4”) 100 (4”) 150 (6”)Rated power (kW) 3.3 2.8 3.6 7 6.6 5.0 Weight (kg) 33 140 127 177 141 300Length (m) 1.08 0.95 1.23 0.91 1.15 1.43Width (m) 0.42 0.84 0.68 0.86 0.80 1.17Height (m) 0.41 0.79 0.64 0.98 0.89 1.05Supply Petrol Diesel Petrol Diesel Petrol Diesel

Electric BWM 50 BWM 50 BWM 75 BWM 100

Discharge diam. (mm/inch”) 60 (2”) 60 (2”) 80 (3”) 100 (4”)Rated power (kW) 0.37 0.37 1.5 3Weight (kg) 27 27 85 105Length (m) 1.08 1.08 1.23 0.91Width (m) 0.42 0.42 0.92 0.86Height (m) 0.41 0.41 0.64 0.84Supply 1~ 3~ 3~ 3~

1~ = 1-phase 230V 50 Hz3~ = 3-phase 400V 50 Hz


Discharge diam. (mm/inch") 50 (2") to 80 (3.15") 40 (1.6") to 200 (8") 100 (4")

BWJ BWL BWF

Rated power (kW) 6.8 to 36 4.5 to 49 22

Max head (m) and Flow (l/min) 50/1100 52/11200 36/3050

Diesel

Rated power (kW) 1.1 to 30

BWL

Discharge diam. (mm/inch") 40 (1.6") to 200 (8")

Max head (m) and Flow (l/min) 60/8400

Electric


Accessories for Flygt self-priming pumps

The versatility and reliability of Flygt self-priming pumps is further enhanced by a wide range of options and accessories designed to simplify installation and operation.

These accessories include everything from hoses for both suction and discharge, pipes, strainers up to complete wellpoint systems including drills and jetting pumps.

Contact your local Flygt authorized dealer for more information.

Wellpoint

Hoses with fitted strainer

Sound-attenuated versions of Flygt self-priming pumps

DWV Sewage by-pass pump in sound-attenuated version

To meet any noise limitation requirements, the Flygt self-priming pumps also come in optional super-silent sound-attenuated models, i.e. 63dB (A) at 7 metres.This makes them suitable for use in residential areas or where low sound emissions are required.All components are easily accessed through the side doors and top-hatches for quick inspection and maintenance of the pump end, engine parts and accessories etc.

Contact your local Flygt authorized dealer for more information.

35

Flygt


Flyg

t d

ewat

erin

g p

um

ps

50

Hz

NEE

/SEE

.01

.En

g.1

2.0

8

53

0

Tro

sa T

ryck

eri

AB

6

61

90

What can ITT Water & Wastewater do for you?

Integrated solutions for fluid handling are offered by ITT Water & Wastewater as a world leader in transport and treatment of wastewater. We provide a complete range of water, wastewater and drainage pumps, equipment for monitoring and control, units for primary and secondary biological treatment, products for filtration and disinfection, and related services. ITT Water & Wastewater, headquartered in Sweden, operates in some 140 countries across the world, with own plants in Europe, China and North and South America. The company is wholly owned by the ITT Corporation of White Plains, New York, supplier of advanced technology products and services.

www.ittwww.com

flygt dewatering pumps

Documents