flowtite pressure pipes rev. -...
TRANSCRIPT
B E N E F I T S A N D C U S T O M E R V A L U E
Benefits • LightNon-corrosible
Customer value • Faster to install • More than 150 years expected lifetime
Areas of use • Used in applications without pressure end- thrust, for example penstocks, potable- and raw water, irrigation and cooling.
Other pipes from Flowtite
• Pressure Pipes• Biaxial Pipes• Jacking Pipes
T E C H N I C A L D ATA
Operating pressure Up to 32 bar
Main Materials Glassfibre Reinforced Plastic (GRP)
Estimated lifetime More than 150 years
External waterhead 50 meter
Operating temperature -50 oC - +70 oC
Standard lengths 6 & 12 metres
Corrosion protection None needed
k = 0,029 mm Colebrook-White
Diameter range (DN) 80 - 4000
Stiffness range (SN) 2500 - 10 000
Assesment of conformity CEN TS 14632
International Pipe Standards ASTM D3262, ASTM D3754, ASTM D3517 AWWA C950ISO 10639, ISO 10467EN 1796, EN 14634
Flowtite Pressure Pipe. Notice the core that provides stiffness, and the structural layers on each side, providing pressure resistance. The thin, but strong, Flowtite pipe wall is achieved by continuous reinforcement fibres.
FLOWTITE PRESSURE PIPES
70 000 KILOMETRES OF FLOWTITE PRESSURE PIPES HAVE BEEN INSTALLED WORLDWIDE. THIS IS THE WORLDS LEADING GRP PIPE.Flowtite Pressure pipe has its main reinforcement in the hoop direction. It is used in applications without pressure end thrust, for example penstocks and pressure mains. Flowtite Pressure pipe is the first choice for municipal infrastructure.
www.flowtite.com
F L O W T I T E P R E S S U R E P I P E
2 0 1 5 - 0 7 - 1 8 R e v . 2
Flowtite Pressure pipes with the Flowtite Double Bell Pressure Couplings
•
Pressure range:
PN1 PN32
Stiffness range:
SN2500 SN5000 SN10000
Hydraulic roughness
Low lifetime maintenance cost•
Thin pipe walls provides maximum waterflows•Smooth bore, k = 0,029 - coupling included!•Available worldwide•
Lower pumping cost on pressure mains•Maximum energy outtake on penstocks•On time delivery - all over the world!•