floor not to scale - allnex construction products · cold joint. sit-on coving detail ... typical...
TRANSCRIPT
STANDARD COVING DETAIL
FLOOR
Wall: Insulated Wall Panel etc.
Nuplex 9.2mm rebated aluminium Coving Strip; Polyurethane sealant behind; Screwed or Riveted.
150mm wide 450gsm chopped strand fibreglass matt, resin bonded.
Cove: Typical 75 or 50mm radius, typically 100-150mm or higher
NOT TO SCALE
Sealantat 30° angle
Coving Strip9.2mm rebate
Sealant
RF 00317-11-2015
Sureshield / Terrazzite
Cold joint
NON-STANDARD COVING DETAIL
FLOOR
Wall: Insulated Wall Panel etc.
Nuplex 9.2mm rebated aluminium Coving Strip; Polyurethane sealant behind; Screwed or Riveted.
150mm wide 450gsm chopped strand fibreglass matt, resin bonded.
Pencil Cove
NOT TO SCALE
Uses: 1.0 - Square cove for confined spaces e.g. for back unit leg space. 2.0 - For corners where a radiused cove may cause a trip hazard.Caution: Coves with a 25mm or 50mm radius are more hygienic and easy to clean.
RF 003-0117-11-2015
Sureshield / Terrazzite
Cold joint
STAINLESS STEEL DRAINCast around
RF 046A
NOT TO SCALE
Stainless Steel Drain(design by others)
Sureshield Toppingfalling to drain
01-10-2015
ST2 Prefillnon shrink grout
K130 Sealant
Drain Height Packers