fitment guide for r2629p · 3. clean mating face for bevel cut gasket, apply film of diesel fuel to...
TRANSCRIPT
Reusable lid,
Filter Element.
“O” Ring seal.
Bevel cut gasket.
Filter housing.
“O” Ring seal groove.
Bevel cut gasket seat.
1: Remove housing lid using a filter “strap-wrench”. Do not damage as lid is to be used again.2: Remove and discard filter, “O” ring and bevel cut gasket.3. Clean mating face for bevel cut gasket, apply film of diesel fuel to gasket and fit to housing.4: Apply film of diesel fuel to “O” ring and fit to filter element then fit new filter to housing.5: Fit lid to housing slowly (allow fuel to soak into element) Tighten until lid contacts housing body.
AUSTRALIAGUD Automotive Pty Ltd29 Taras Avenue, Altona NorthVictoria 3025 Australia.www.ryco�lters.com.au
NEW ZEALANDGUD Automotive - A division of GUD (NZ) Holdings Limited626A Rosebank Road AvondaleAuckland, New Zealandwww.ryco.co.nz
SOCIAL NETWORKSFacebook: http://facebook.com/ryco�ltersYouTube: http://youtube.com/ryco�lters1Twitter: http://twitter.com/Ryco_Filters
FITMENT GUIDE FOR R2629P