fields of interest we build the future together
TRANSCRIPT
Administrative office Via Trieste, 22ManufacturingVia Trieste, 419020 Follo (SP)Tel. ++39 0 187 933841Fax ++39 0 187 933949
Warehouseand TestingLoc. Lagoscuro, 5119020 Vezzano Ligure (SP)Tel. ++39 0 187 931180Fax ++39 0 187 933949
Local branchVia Greco, 381020 Capodrise (CE)
Legal headofficeVia Aldo Moro, 9219029 Follo (SP)
We build the future togetherFields of Interest
Products
Transportation (railway) Defence (military)
Industry Power and Environment
• HV/MV, MV/LV, LV/LV switchboards• MMI and HMI Main Machine Interface and Human Machine Interface
• CCS Electronics Control and Command Systems
• Development and test of the application software, specific for electronics equipments• AC/DC – DC/DC auxiliary converters• Electrical and electronic pre-wiring and wiring
• MV/LV, LV/LV switchboards• Control and Command Consolle• ATE Automated Test Equipment
• Development of the application software for control and process equipments
• MMI and HMI Main Machine Interface and Human Machine Interface
• Embedded systems for the measurement and data acquisition• Development of complex digital, analog and mixed signal• Rugged Systems• Electrical and electronic pre-wiring and wiring
• Air and water quality monitoring stations• Chemical emissions monitoring stations• Mobile vehicles for meteorological measurements• Data acquisition and measurement systems
ElectricalSwitchboards
HMI and MMI ATE Electronics Electrical Wiring Industrialequipments
All trademarks in this document are the property of their respective owners. This trademarks are mentioned only as a reference and IGM don’t have any rights about them.
The Company
IGM started its activity in 1992 with a great idea: to extend the know-how of its team, expert in military field, to the automation, transportation, energy and environment areas, aiming to more and more ambitious targets.In over 20 years, IGM had the ability and the specialization in study, design and manufacture of electronic, electromechanical and hydraulic automation systems and equipments, both hardware and software. All the design and manufacturing processes consist of:• technical resources optimization• flexibility of the activities• high quality levels• cost reductionThe IGM design and technical skills guides us to be a Partner/Supplier for the project and the manufacture of the systems and equipments, searching the best solution for the customer requirements.Competence and experience acquired in military and transportation fields allow us to realize complex projects and custom-tailored applications with certified quality.
The GroupWidening of the supply scopes, flexibility in offering a customized product and the presence all over the national territory became some of the strengths of the company group.
Main Customers
Some of our Projects
The Organization
The ambitions of a growing business must be followed by action. For this reason IGM has invested in a integrated management system MRP able to steer the organization toward innovation and increased competitiveness.The management system has been customized to allow the management of all business functions and product traceability.An internal auditor is responsible for overseeing the processes carried out by the various departments in order to ensure the supply of products / services in line with the highest standard requirements.
Qualifications
In order to keep the quality standard requested by the market, IGM decided to certify according to UNI EN ISO 9001:2008.IGM obtained NATO constructor code (AE899); furthermore it has all the company structures and the people qualifications to perform classified works.All operators involved in manufacuring and quality control are trained in-house and their training is periodically checked and verified. The staff of the soldering process are also in possession of the IPC certification.IGM started the procedures for the implementation of the already acquired qualifications in order to obtain the
Customer: Ansaldo Breda / BombardierETR1000 switchboard Customer: Firema Trasporti MCNE (Metro Campania Nord Est) Customer: Ansaldo Breda TSR (Regional Transport Service) Customer: GE Transportation EUROLOCO
Customer: OTO MelaraFuse programmer Customer: WASS BAP 102 Customer: Fincantieri MAMIS Customer: MBDA SMIR
Customer: ENELEngine performances control systems Customer: Fincantieri Gasworks load control racks
Customer: A.R.P.A.L.Air quality monitoring system Customer: ENEL Atmospheric pollution sampling system Customer: CISAM Environmental monitoring mobile vehicle
Administrative office Via Trieste, 22ManufacturingVia Trieste, 419020 Follo (SP)Tel. ++39 0 187 933841Fax ++39 0 187 933949
Warehouseand TestingLoc. Lagoscuro, 5119020 Vezzano Ligure (SP)Tel. ++39 0 187 931180Fax ++39 0 187 933949
Local branchVia Greco, 381020 Capodrise (CE)
Legal headofficeVia Aldo Moro, 9219029 Follo (SP)
We build the future togetherFields of Interest
Products
Transportation (railway) Defence (military)
Industry Power and Environment
• HV/MV, MV/LV, LV/LV switchboards• MMI and HMI Main Machine Interface and Human Machine Interface
• CCS Electronics Control and Command Systems
• Development and test of the application software, specific for electronics equipments• AC/DC – DC/DC auxiliary converters• Electrical and electronic pre-wiring and wiring
• MV/LV, LV/LV switchboards• Control and Command Consolle• ATE Automated Test Equipment
• Development of the application software for control and process equipments
• MMI and HMI Main Machine Interface and Human Machine Interface
• Embedded systems for the measurement and data acquisition• Development of complex digital, analog and mixed signal• Rugged Systems• Electrical and electronic pre-wiring and wiring
• Air and water quality monitoring stations• Chemical emissions monitoring stations• Mobile vehicles for meteorological measurements• Data acquisition and measurement systems
ElectricalSwitchboards
HMI and MMI ATE Electronics Electrical Wiring Industrialequipments
All trademarks in this document are the property of their respective owners. This trademarks are mentioned only as a reference and IGM don’t have any rights about them.
The Company
IGM started its activity in 1992 with a great idea: to extend the know-how of its team, expert in military field, to the automation, transportation, energy and environment areas, aiming to more and more ambitious targets.In over 20 years, IGM had the ability and the specialization in study, design and manufacture of electronic, electromechanical and hydraulic automation systems and equipments, both hardware and software. All the design and manufacturing processes consist of:• technical resources optimization• flexibility of the activities• high quality levels• cost reductionThe IGM design and technical skills guides us to be a Partner/Supplier for the project and the manufacture of the systems and equipments, searching the best solution for the customer requirements.Competence and experience acquired in military and transportation fields allow us to realize complex projects and custom-tailored applications with certified quality.
The GroupWidening of the supply scopes, flexibility in offering a customized product and the presence all over the national territory became some of the strengths of the company group.
Main Customers
Some of our Projects
The Organization
The ambitions of a growing business must be followed by action. For this reason IGM has invested in a integrated management system MRP able to steer the organization toward innovation and increased competitiveness.The management system has been customized to allow the management of all business functions and product traceability.An internal auditor is responsible for overseeing the processes carried out by the various departments in order to ensure the supply of products / services in line with the highest standard requirements.
Qualifications
In order to keep the quality standard requested by the market, IGM decided to certify according to UNI EN ISO 9001:2008.IGM obtained NATO constructor code (AE899); furthermore it has all the company structures and the people qualifications to perform classified works.All operators involved in manufacuring and quality control are trained in-house and their training is periodically checked and verified. The staff of the soldering process are also in possession of the IPC certification.IGM started the procedures for the implementation of the already acquired qualifications in order to obtain the
Customer: Ansaldo Breda / BombardierETR1000 switchboard Customer: Firema Trasporti MCNE (Metro Campania Nord Est) Customer: Ansaldo Breda TSR (Regional Transport Service) Customer: GE Transportation EUROLOCO
Customer: OTO MelaraFuse programmer Customer: WASS BAP 102 Customer: Fincantieri MAMIS Customer: MBDA SMIR
Customer: ENELEngine performances control systems Customer: Fincantieri Gasworks load control racks
Customer: A.R.P.A.L.Air quality monitoring system Customer: ENEL Atmospheric pollution sampling system Customer: CISAM Environmental monitoring mobile vehicle
Customer:Firema TrasportiAC/DC converter
Customer:MBDA spaElectronic boards
Customer: FirecantieriShip acquisitiondata system
Customer:ACAMManagement and supervision systemfor pumping water wells
Logistic Department
Due to the growth of IGM GROUP all the logistic activities have been untrusted to IGM SERVICE in order to allow the optimization of the in-and-out flows and cost reduction.
IGM SERVICE’s duties are: receipt of materials, kitting, realization of small subassemblies and deliveries to partners and customers, all ensured according to the highest quality standards.
Design Department
The design department takes advantage of the most advanced software/hardware systems for 3D drawing, F.E.M. analysis and simulation.The design department has the know-how to develop both electromechanical and electronics equipments and systems. The IGM design team skills allow the creation of integrated systems that require:• architectural analisys• functional schemes• construction process verification through simulation tools• specifications and procedures test definitionFor electronics parts, in particular, the design department make use of reverse engineering techniques and fulfill oneself complex hw/sw multiprocessor systems and real-time multitasking operating systems for embedded equipments.
Manufacturing Department
Customer:Ansaldo BredaBombardierCabin cableway
Customer:Elsag SelexPressure sensors
Customer:Nuovo PignoneG.E.Mobile unit for meteorological survey
Customer:OTO MelaraPortable interface
The production department can be organized to fulfill both prototypal and serialized product requests. In order to increase its production capability, IGM can also exploit the proficiency of the outsourcers, that are constantly formed/trained together with IGM’s staff to follow/execute the customer’s specifications and the internal operative instructions.To give a further contribute to the high quality of the products, the workers are supplied with the most sophisticated instruments, machinery and tools.Instrumention is periodically controlled and calibrated by qualified internal staff or, where necessary, by external specialized centres.
Testing Departmentand Customer ServiceThe test department avails itself of a highly qualified staff that has been testing products and systems with “state-of-art” equipments and certifies them according to the highest standards requirements and specifications.Some of the electronic testing systems has been designed and manufactured by IGM itself.The Company has at disposal a staff of skilled workers who can operate on external sites to install equipments, both realized by IGM and supplied by the customer.This staff can also ensure the full assistance and the maintainance of the supplied products.
Manufacturing Department
Customer:Ansaldo BredaBombardierCabin cableway
Customer:Elsag SelexPressure sensors
Customer:Nuovo PignoneG.E.Mobile unit for meteorological survey
Customer:OTO MelaraPortable interface
The production department can be organized to fulfill both prototypal and serialized product requests. In order to increase its production capability, IGM can also exploit the proficiency of the outsourcers, that are constantly formed/trained together with IGM’s staff to follow/execute the customer’s specifications and the internal operative instructions.To give a further contribute to the high quality of the products, the workers are supplied with the most sophisticated instruments, machinery and tools.Instrumention is periodically controlled and calibrated by qualified internal staff or, where necessary, by external specialized centres.
Testing Departmentand Customer ServiceThe test department avails itself of a highly qualified staff that has been testing products and systems with “state-of-art” equipments and certifies them according to the highest standards requirements and specifications.Some of the electronic testing systems has been designed and manufactured by IGM itself.The Company has at disposal a staff of skilled workers who can operate on external sites to install equipments, both realized by IGM and supplied by the customer.This staff can also ensure the full assistance and the maintainance of the supplied products.
Customer:Firema TrasportiAC/DC converter
Customer:MBDA spaElectronic boards
Customer: FirecantieriShip acquisitiondata system
Customer:ACAMManagement and supervision systemfor pumping water wells
Logistic Department
Due to the growth of IGM GROUP all the logistic activities have been untrusted to IGM SERVICE in order to allow the optimization of the in-and-out flows and cost reduction.
IGM SERVICE’s duties are: receipt of materials, kitting, realization of small subassemblies and deliveries to partners and customers, all ensured according to the highest quality standards.
Design Department
The design department takes advantage of the most advanced software/hardware systems for 3D drawing, F.E.M. analysis and simulation.The design department has the know-how to develop both electromechanical and electronics equipments and systems. The IGM design team skills allow the creation of integrated systems that require:• architectural analisys• functional schemes• construction process verification through simulation tools• specifications and procedures test definitionFor electronics parts, in particular, the design department make use of reverse engineering techniques and fulfill oneself complex hw/sw multiprocessor systems and real-time multitasking operating systems for embedded equipments.
All trademarks in this document are the property of their respective owners. This trademarks are mentioned only as a reference and IGM don’t have any rights about them.
The Company
IGM started its activity in 1992 with a great idea: to extend the know-how of its team, expert in military field, to the automation, transportation, energy and environment areas, aiming to more and more ambitious targets.In over 20 years, IGM had the ability and the specialization in study, design and manufacture of electronic, electromechanical and hydraulic automation systems and equipments, both hardware and software. All the design and manufacturing processes consist of:• technical resources optimization• flexibility of the activities• high quality levels• cost reductionThe IGM design and technical skills guides us to be a Partner/Supplier for the project and the manufacture of the systems and equipments, searching the best solution for the customer requirements.Competence and experience acquired in military and transportation fields allow us to realize complex projects and custom-tailored applications with certified quality.
The GroupWidening of the supply scopes, flexibility in offering a customized product and the presence all over the national territory became some of the strengths of the company group.
Main Customers
Some of our Projects
The Organization
The ambitions of a growing business must be followed by action. For this reason IGM has invested in a integrated management system MRP able to steer the organization toward innovation and increased competitiveness.The management system has been customized to allow the management of all business functions and product traceability.An internal auditor is responsible for overseeing the processes carried out by the various departments in order to ensure the supply of products / services in line with the highest standard requirements.
Qualifications
In order to keep the quality standard requested by the market, IGM decided to certify according to UNI EN ISO 9001:2008.IGM obtained NATO constructor code (AE899); furthermore it has all the company structures and the people qualifications to perform classified works.All operators involved in manufacuring and quality control are trained in-house and their training is periodically checked and verified. The staff of the soldering process are also in possession of the IPC certification.IGM started the procedures for the implementation of the already acquired qualifications in order to obtain the
Customer: Ansaldo Breda / BombardierETR1000 switchboard Customer: Firema Trasporti MCNE (Metro Campania Nord Est) Customer: Ansaldo Breda TSR (Regional Transport Service) Customer: GE Transportation EUROLOCO
Customer: OTO MelaraFuse programmer Customer: WASS BAP 102 Customer: Fincantieri MAMIS Customer: MBDA SMIR
Customer: ENELEngine performances control systems Customer: Fincantieri Gasworks load control racks
Customer: A.R.P.A.L.Air quality monitoring system Customer: ENEL Atmospheric pollution sampling system Customer: CISAM Environmental monitoring mobile vehicle
