field proven. - utility salesutilitysales.net/wp-content/uploads/2015/05/usicatalog... ·  ·...

49

Upload: buingoc

Post on 08-May-2018

221 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy
Page 2: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

Lineman driven. Field proven.

UTILITYSOLUTIONS

Phone (828)323-8914Fax (828)323-8410Email [email protected] www.utilitysolutionsinc.com

101 33rd Street Drive SE · Hickory, NC 28602

Utility Solutions was founded in 1990. We design and manufacturehot line tools and products for the electrical power industry.

We are Lineman driven. Our products are Field proven.

Lineman driven. Field proven.™• Our product line has evolved from the field, and from a lineman’s

perspective. • We create innovative designs, and focus on safety, reliability and ease

of use. • Each product is designed and built to exceed industry standards and

have a long and useful life.• All products are Made in USA (excluding cutouts).

Good People = Good Products• We have a design and manufacturing philosophy

of putting the lineman first.• We have a dedicated and talented staff with

years of experience in materials engineering, mechanical engineering, electrical engineering, and machine design.

• We have a stable and experienced workforce, many of whom have been with us for 10 years or more.

Product Development• Our size enables us to bring new ideas to market quicker

than our competition.• We design and build tools FOR linemen that solve a

problem or perform a specific function.• Several of our most widely used products were invented

by linemen.

Do you have an idea for a new product?

Innovative Designs• We manufacture tools and products that linemen WANT to use.• Innovations in load break technology, fiberglass construction, materials

selection, and machining have made Utility Solutions tools and products the best on the market.

Page 3: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

2 3

Metering ProductsMeter Grabber 52Electric Meter Jumper Leads 53Low Voltage Bypass Tool 54

Safety & TrainingLoad-Trainer™ 56Grounds Tester 58Tool Demonstration Trailers 59

Rubber GoodsInsulated Rubber Blankets 62Blanket Clamp 63Blanket Buttons 63Klondike Clamp 64Blanket Mate Heavy Duty Blanket Holder 65Jumper Hook 66Jumper-Aid™ 67Bucket Mate Polymeric Hook 68

AppendixFiberglass Hot Stick Part Lists 70Sales Representative Directory 88Standard Terms and Conditions of Sale 91Index 93

Lineman driven. Field proven.

UTILITYSOLUTIONS

Phone (828)323-8914Fax (828)323-8410Email [email protected] www.utilitysolutionsinc.com

101 33rd Street Drive SE · Hickory, NC 28602

Load Break ToolsLOAD-RANGER® XLT Load Break Tool 6BREAK-SAFE® Load Break & Pick-up Tool 8BREAK-SAFE® 600 Load Break & Pick-up Tool 10Fuse-Safe™ 12

Overhead DistributionJack Jumper™ Cutout Bypass Tool 14Grab-It™ Cutout Fuse Tube Remover 15Jumper Hook 16Jumper-Aid™ 17Jumper-T 18Conductor Cleaning Clamp 19Conductor Cleaning Brush 20Arm Guard Raptor Shield 21Varmint Shield 22

Overhead Fuse CutoutsOverhead Cutouts 24Expendable Fuse Tube Caps 26

Underground DistributionElbow-Mule™ 28Universal URD Wrench 29Pad Mount Multi-Tool 29Strip-N-Coil™ 30

Fiberglass Hot SticksBLUE STRIPE® Telescopic Hot Sticks 34Heavy Duty Rubber End Cap Option 35Protect your Investment! 35Add a Protective Bag 35BLUE STRIPE® Shotgun Sticks 36BLUE STRIPE® Sectional Disconnect Sticks 38Snap On Adapters for Disconnect Sticks 40Sectional Disconnect Storage Bags 40BLUE STRIPE® Measuring Sticks 41BLUE STRIPE® Foam Filled Straight Sticks 42Boom Holster 43BLUE STRIPE® Rescue Hook 44BLUE STRIPE® Severe Weather Stick 44Protective Bags for Fiberglass Sticks 45Bucket Stick Storage Case 45Hot Stick Accessories 46Spline Torque Bar 46BLUE STRIPE® Cloth 48BLUE STRIPE® Wipes 48BLUE STRIPE® Hot Stick Wax 49BLUE STRIPE® General Purpose Cleaner 49

UTILITY SOLUTIONSPRODUCT CATALOG

Page 4: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

6

BREAK-SAFE® Load Break & Pick-up Tool

8

BREAK-SAFE® 600 Load Break & Pick-up Tool

10

Fuse-Safe™ 12

LOAD-RANGER® XLT Load Break Tool

Load Break Tools

Page 5: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

7

Load Break Tools

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

6

Load Break Tools

COMPARISON LOAD-RANGER® USLR-XLT -1

COMPETITION LOAD-RANGER®

USLR-XLT -2COMPETITION

MAXIMUM VOLTAGE 27 kV 27 kV 27 kV - 38 kV 27 kV - 38 kV

MAXIMUM AMPERAGE 900 AMP 900 AMP 900 AMP 900 AMP

WEIGHT 4 lb 3 oz 5 lb 6 oz 4 lb 12 oz 6 lb

COUNTER AVAILABLE OPTIONAL MANDATORY OPTIONAL MANDATORY

METAL TO METAL CLEARANCE DURING STROKE(FLASH-OVER RESIS-TANCE)

8.2” EST 7.1” EST 12.2” EST 10” EST

RESET FUNCTIONUNIQUE SIDE

LOCATIONNO PINCH DESIGN

TOP LOCATIONUNIQUE SIDE

LOCATIONNO PINCH DESIGN

TOP LOCATION

USLR-XLT-1 UP TO 27 kV RATED, 900 AMP WITH COUNTER

USLR-XLT-2 27 kV - 38 kV RATED, 900 AMP WITH COUNTER

The Lightest, Most User-Friendly Portable Load Break Tool Available!

USLR-XLT-2

LOAD-RANGER® USLR-XLT

HOW TO ORDER:

USLR-XLT-1

add “E” for Extended Hood

OPTIONSThe XLT line is offered with numerous options including a Pad Mount version, hard case, soft case, extended insulated hood, and an economical non-counter version.

Most Common Versions:USLR-XLT-1-H LOAD-RANGER® XLT Load Break Tool, 27 kV RATED, 900 AMP WITH COUNTER AND HARD CASE

USLR-XLT-2-H LOAD-RANGER® XLT Load Break Tool, 27 kV -38 kV RATED, 900 AMP WITH COUNTER AND HARD CASE

The Pad Mount option “P” uses a uniquely designed operating arm that creates a lower profile to provide maximum clearance for the tight confines in pad gear. This option also comes standard with an extended insulated hood.

add “NC” for No Counter

add “S” for Soft Case

add “H” for Hard Case

LIGHTWeighing under 5 pounds, the XLT line of Load Break Tools are by far the lightest portable load break tools available in the world. The XLT-1 is approximately 1 lb 3 oz lighter than the competition. Tool weight becomes extremely important when the tool is attached to the end of a fiberglass operating stick. The lighter the better for optimum tool control and minimal operator fatigue.

EASYThe XLT line was designed to be user

friendly and simple to operate. It incorporates an optional counter and a unique reset button

located on the side which allows full tool reset without glove removal. This results in NO

MORE PINCHED FINGERS. Spare parts are readily available and inspection and maintenance

procedures are easy to follow.

SAFE The Utility Solutions

XLT product line has the highest

measured metal-to-metal clearance of any load break tool. This greatly

reduces flash-over potential during

operation.

LOAD-RANGER® USLR-XLT

USLR-XLT-1

LOAD-RANGER® XLT Load Break Tool

Page 6: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

9

Load Break Tools

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

8

Load Break Tools BREAK-SAFE®

Floating Head Style Duckbill Style

The ONLY Load Break & Pick-up Tool Available!

Bottom

Optional Soft Case

Remote Trigger Design!

COMPARISON BREAK-SAFE® USBS-15

BREAK-SAFE® USBS-27

BREAK-SAFE® USBS-46

OPERATIONAL VOLTAGE 15 kV 27 kV 46 kV

LOAD BREAK RATING 300 AMP 300 AMP 200 AMP

LOAD PICKUP RATING 300 AMP 300 AMP 200 AMP

CONTINUOUS CURRENT RATING

300 AMP 300 AMP 200 AMP

CONDUCTOR SIZE #6 COPPER MIN. up to 954 ACSR (1.1” dia.)

MAX.

#6 COPPER MIN. up to 954 ACSR (1.1” dia.)

MAX.

#6 COPPER MIN. up to 954 ACSR (1.1” dia.)

MAX.

WEIGHT 7 lb 1 oz 7 lb 14 oz 10 lb 1 oz

DIMENSIONS 27” long x approx. 2.5” dia.

31” long x approx. 2.5” dia.

39” long x approx. 2.5” dia.

USBS-15-1-PS 15 kV - 300 AMPS WITH FLOATING HEAD

USBS-15-2-PS 15 kV - 300 AMPS WITH DUCKBILL HEAD

USBS-27-1-PS 27 kV - 300 AMPS WITH FLOATING HEAD

USBS-27-2-PS 27 kV - 300 AMPS WITH DUCKBILL HEAD

USBS-46-1-PS 46 kV - 200 AMPS WITH FLOATING HEAD

USBS-46-2-PS 46 kV - 200 AMPS WITH DUCKBILL HEAD

OPTIONS

USBS-xx-x-PS-S WITH SOFT CARRYING CASE

HOW TO ORDER:

USBSBREAK-SAFE® USBS

EASY & SAFEUsing an insulated fiberglass hot stick to break load and activate the side-mounted trigger to pick-up load, keeps personnel out of harms way. A locking safety pin ensures the tool stays in either the open or closed position until the operator is ready to proceed. A yellow indicator band ensures that the tool has fully closed and is ready for the next load break function.

PORTABLE SWITCHThe patented BREAK-SAFE® is the only load break and load pick-up tool available in the world. Lightweight and compact, in the hands of a trained lineman the BREAK-SAFE® functions as a portable switch to provide repair/maintenance convenience and flexibility almost anywhere on the system.

POWERFUL This tool is a

“must have” for any organization

committed to minimizing repair or

maintenance downtime while providing field repair personnel the

utmost in support capability. The BREAK-

SAFE® is equipped with a conductor bar to permit use

of existing jumper cables.

OPTIONSThe BREAK-SAFE® is offered

in 15 kV, 27 kV, and 46 kV ratings. For those organizations

that do not allow the use of gloved installation, Utility

Solutions offers the duckbill style head. This option allows the

BREAK-SAFE® to be installed and removed from the line using

a fiberglass shotgun stick. USBS-15-1-PS

BREAK-SAFE® Load Break & Pick-up Tool

Page 7: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

11

Load Break Tools

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

10

Load Break Tools

Dual Conductor BarsExtra Large Clamp

USBS-600-1 BREAK-SAFE® 600 AMP

USBS-600-1-S WITH SOFT CARRYING CASE

600 Amp7.2 - 27 kV

COMPARISON BREAK-SAFE® USBS-600-1

BREAK-SAFE® USBS-15

BREAK-SAFE® USBS-27

OPERATIONAL VOLTAGE 7.2 - 27 kV 15 kV 27 kV

LOAD BREAK RATING 600 AMP 300 AMP 300 AMP

LOAD PICKUP RATING 600 AMP 300 AMP 300 AMP

CONTINUOUS CURRENT RATING

600 AMP 300 AMP 300 AMP

CONDUCTOR SIZEAll sizes up to 2” dia.

#6 COPPER MIN. up to 954 ACSR (1.1” dia.)

MAX.

#6 COPPER MIN. up to 954 ACSR (1.1” dia.)

MAX.

WEIGHT 10 lb 13 oz 7 lb 1 oz 7 lb 14 oz

DIMENSIONS 32” long x approx. 3.5” dia.

27” long x approx. 2.5” dia.

31” long x approx. 2.5” dia.

BREAK-SAFE® USBS

Optional Soft Case

BREAK-SAFE® USBS

FEATURESSome of the unique patent pending features include an extra large clamp capable of handling all wire sizes up to nearly 2” diameter. Dual

INDUSTRY FIRSTIntroducing the industry’s first portable switch rated at 600 amp for all three tool functions: load break, load pick-up and continuous current duty. It is fully rated from 7.2 kV to 27 kV.

SAFETYThe USBS-600

is designed with a patent pending

internal safety lock. If the tool is not reset, the

tool will not open. An external, manual locking pin keeps the tool either

locked open or closed, until the operator is ready.

This tool features durable electrical grade

fiberglass housings and

a glove friendly design.

BREAK-SAFE® 600 Load Break & Pick-up Tool

conductor bars allow the use of two mechanical jumper clamps, which is needed to go above the typical 300 amp rating of mechanical jumpers.

- Portable Switch- 7.2 kV - 27 kV Range- 600 amp- Safe & Durable

Page 8: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

12

Load Break Tools

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

The Fuse-Safe™ is a portable current-limiting fuse and fault close-in protection tool. This device offers an easier and safer method of protection compared to traditional cut-out based devices which rely on fuse tubes and bulky insulators. This device is extremely useful when placed in series with the Utility Solutions BREAK-SAFE®.

The Fuse-Safe™ is the best choice for Fire prevention areas which cannot use open fuse tube devices. The current-limiting fuse design will not expel hot metal or gases when triggered.

The Fuse-Safe™ consists of two components: an upper duckbill coupling ring and a lower conductor bar coupling ring. These components directly attach to any 5/8” studded end current limiting fuse using a standard 1/8” Allen wrench (provided). The fuse is easily replaced with only two Allen screws.

The Fuse-Safe™ USFS-001/2 uses a 5/8” diameter conductor bar and does NOT come with a current limiting fuse. The USFS-003/4 uses a 3/8” diameter conductor bar and has a current limiting fuse provided by Thomas & Betts Hi-Tech Fuses. Our website has a complete list of fuse options.

USFS-001 FUSE-SAFE™ 5/8” CONDUCTOR BAR WITHOUT CURRENT LIMITING FUSE

USFS-002 FUSE-SAFE™ 5/8” CONDUCTOR BAR WITH FUSE INCLUDED

USFS-003 FUSE-SAFE™ 3/8” CONDUCTOR BAR WITHOUT CURRENT LIMITING FUSE

USFS-004 FUSE-SAFE™ 3/8” CONDUCTOR BAR WITH FUSE INCLUDED

Fuse-Safe™ USFS

Fuse-Safe™

Lightweight, Portable Protection. Perfect for High Fire Prevention Areas!

Duckbill Clamp

Jack Jumper™ Cutout Bypass Tool 14

Grab-It™ Cutout Fuse Tube Remover 15

16Jumper Hook

17Jumper-Aid™

18Jumper-T

19Conductor Cleaning Clamp

20Conductor Cleaning Brush

21Arm Guard Raptor Shield

22Varmint Shield

Overhead Distribution

Page 9: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

15

Overhead Distribution

14

Overhead Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

The patented Jack Jumper™ Cutout Bypass Tool permits a safe and quick method to

temporarily bypass an overhead cutout without the tedious use of bulky jumper cables. The tool is indispensable for fuse coordination tasks and

permits easy bypass of an underground dip. The Jack Jumper™ Cutout Bypass Tool saves time and money,

eliminates risk of service interruption and prevents accidental cross phasing.

All Jack Jumper™ Cutout Bypass Tools are rated at 100 AMP. Installation and removal is done with a shotgun stick.

Jack Jumper™ Cutout Bypass ToolNo More Jumper Cables!

USJJ

Jack Jumper™ USJJ

Catalog Number

Description Weight

USJJ-001 15 kV Cutout Bypass Tool 12 oz

USJJ-002 27 kV Cutout Bypass Tool 15 oz

USJJ-003 15 kV Chance™ Loadbreak Cutout Bypass Tool 15 oz

USJJ-004 15 kV ABB™ Loadbreak Cutout Bypass Tool 15 oz

USJJ-005 38 kV Cutout & S&C™ SMD-20 15 kV Power Fuse Bypass Tool

1 lb 3 oz

USJJ-006 S&C™ SMD-20 27 kV Power Fuse Bypass Tool 1 lb 4 oz

USJJ-007 S&C™ SMD-20 38 kV Power Fuse Bypass Tool 1 lb 14 oz

USJJ-008 27 kV Chance™ Loadbreak Cutout Bypass Tool 1 lb 2 oz

USJJ-009 27 kV ABB™ Loadbreak Cutout Bypass Tool 1 lb 2 oz

see chart above

USJJ-XXX-S Optional Soft Case (not available on USJJ-007)

The patented Grab-It™ offers a simple and economical method to safely remove or install overhead fuse barrels. The Grab-It™ design provides positive control of the fuse barrel even in high wind conditions to prevent accidental drops. No need to find the fuse barrel pull ring or lifting eye which is difficult in low lighting conditions. Simply sweep behind the fuse barrel and lift. The Grab-It™ works

as well at the end of a 50 ft telescopic as it does at the end of an 8 ft bucket stick. Requires no special stick movement or procedure to operate.

The Grab-It™ is machined from aircraft grade aluminum to provide years of trouble free operation. The Grab-It™ has no moving parts, no springs and no plastic parts to break.

GRAB-IT

Grab-It™ GRAB-IT

GRAB-IT-1

GRAB-IT-1 100 AMP CUTOUT FUSE TUBE REMOVER

GRAB-IT-2 100 & 200 AMP CUTOUT FUSE TUBE REMOVER

GRAB-IT-3 SMU-20 CUTOUT FUSE TUBE REMOVER

GRAB-IT-1 GRAB-IT-2 GRAB-IT-3FUSE TUBES 100 AMP 100 & 200 AMP SMU-20

DIMENSIONS 4.5” x 4.5” x 4” 4.5” x 4.5” x 4” 6” x 4.5” x 4”

WEIGHT 11 oz 11 oz 15 oz

GRAB-IT-3

Works well on a 50 ft telescopic or an 8 ft bucket stick.

*add “F” for Hi Visibility

Grab-It™ Cutout Fuse Tube Remover

Page 10: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

17

Overhead Distribution

16

Overhead Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Product Dimensions: 11” x 4.5” x .5”Product Weight: 6 oz

The Jumper Hook is designed to eliminate jumper clamp sag and prevent potential cross-phasing situations without the time consuming use of tape, bungee cords or rope. The Jumper Hook also minimizes a jumper clamp swaying in high wind conditions.

Simply hang multiple Jumper Hook units along the intended jumper clamp path and let the tool cradle the jumper clamp. Easily installed by a gloved hand or with a shotgun stick the Jumper Hook will fit over any class 2 or 3 line hose and exhibits a

flash-over resistance of over 50 kV.

The Jumper Hook is made of a high visibility polymer material that can handle the rigors of daily use even in cold temperatures.

Jumper Hook

USJH-001

Jumper Hook USJH

USJH-001 JUMPER HOOK (6 per pack)

No More Jumper Lead

Sag!

Product Dimensions: 14” x 10” x 1”Product Weight: 1 lb 3 oz

The patented USJH-002 Jumper-Aid™ is designed to support a jumper wire during construction, maintenance, or repairs. It is particularly useful when a jumper is required to be in the vicinity of a conductor of a different voltage/phase. The USJH-002 allows for the mechanical jumper and or conductor to be supported while wrapped in an insulating rubber blanket and or line hose while eliminating the need for rope or tape. The pivoting nature of the USJH-002 offers positive locking about the jumper/conductor. The USJH-002 is also a useful tool to prevent jumper “sag” about a cross arm.

Jumper-Aid™

USJH-002

Jumper-Aid™ USJH

USJH-002 JUMPER-AID™

Page 11: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

19

Overhead Distribution

18

Overhead Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Product Dimensions: 26.5” x 12” Product Weight: 3 lb

The Jumper-T tool series eliminates the need for purchasing bulky lengths of extra long jumper cables by allowing a lineman to combine shorter sections of jumper cable.

Use the Jumper-T with a BREAK-SAFE® tool to create a straight forward visible gap. Meets or exceeds all applicable industry performance criteria including OSHA 1926.951(d)(1) and ASTM F-711.

Non-conductive foam filled fiberglass provides over 15” of metal-to-metal clearance between the upper duckbill clamp and the lower parking stand. The upper duckbill clamp will tighten on wire ranging from #6 copper up to 1033 MCM. Both USJT-001 and USJT-002 are rated for 400 Amperes Continuous Current.

The USJT-001 is manufactured using a solid horizontal aluminum

parking stand (11 1/4” long x 5/8” diameter).

The USJT-002 is manufactured using a bent handlebar configuration (3/4” diameter aluminum) that allows for mechanical jumpers to be clamped in both the horizontal and vertical plane. Attachment of jumpers in the vertical plane minimizes sag and reduces the potential for cross-phasing to occur.

Custom sizes available - Call your Sales Representative for details.

Jumper-T

USJT-001/002

Jumper-T USJT

Use Less Heavy Bulky

Cable!

Duckbill top clamp

USJT-001

USJT-002

USJT-001 JUMPER-T 5/8” DIA. STRAIGHT JUMPER BAR

USJT-002 JUMPER-T ¾” DIA. BENT JUMPER BAR

Product Dimension: 12” x 5” x 5” Product Weight: 2 lb 8 ozConductor Size range: #4 minimum through 750 MCM maximum C-clamp design

The Utility Solutions Conductor Cleaner Clamp offers optimum conductor cleaning prior to infield grounding and jumping connections. The C-Clamp design permits either hand held operation or shotgun operation while providing a full 360 degree conductor cleaning. USCC-001 Conductor Cleaning Clamp ships with the USCC-002 and USCC-003 brush pad sets.

Brush pad sets are 5” in length and can be interchanged without the use of any tools. Includes USCC-002 brush pad set for 250 MCM - 750 MCM conductors and the USCC-003 brush pad set for #4 - 250 MCM conductors.

Conductor Cleaning Clamp

USCC-001

Includes2 Brush Sets!

USCC-002 USCC-003

USCC-001 CONDUCTOR CLEANING BRUSH (includes USCC-002 & USCC-003)

USCC-002 REPLACEMENT BRUSH SET FOR 250 MCM - 750 MCM CONDUCTOR

USCC-003 REPLACEMENT BRUSH SET FOR #4 - 250 MCM CONDUCTOR

Conductor Cleaning Clamp USCC

Page 12: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

21

Overhead Distribution

20

Overhead Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

The unique design of the Conductor Cleaning Brush allows full 360 degree cleaning and remote operation with the use of an insulated shotgun stick. Simply lock the brush into a shotgun stick and push the “V” throat against the conductor to open the jaws and enclose the conductor. Now place the shotgun stick in the unlocked position but keep the conductor cleaner secured within the shotgun end. This will permit the operator to provide a full 360 degree cleaning action on the conductor. Stainless steel tension springs assure aggressive brush cleaning action to remove even the most stubborn oxide layer.

When cleaning is completed return the shotgun stick to the locked position and remove the tool.

If you are serious about obtaining a solid jumper or grounding connection our cleaning brushes are a must.

Our conductor cleaners are machined from a tough weather resistant polymer. All hardware is stainless steel to provide years of trouble free service. Brush set replacement requires only a Phillips screwdriver.

Conductor Cleaning Brush

USCC-004/006

Cleaning Brush USCC

The Last Word in Oxide Removal!

USCC-007

USCC-005

USCC-004 3”-11” CONDUCTOR CLEANING BRUSH(includes USCC-005)

USCC-006 3/4” TO 3” CONDUCTOR CLEANING BRUSH(includes USCC-007)

USCC-005 REPLACEMENT BRUSH SET FOR USCC-004

USCC-007 REPLACEMENT BRUSH SET FOR USCC-006

USCC-004

USCC-006

CONDUCTOR SIZE

WEIGHT REPLACEMENT BRUSH

USCC-004 3” - 11” 1 lb 3 oz USCC-005

USCC-006 3/4”-3” 15 oz USCC-007

Product Dimensions: 17” wide x 48” long x 9” high Product Weight: 6 lb

The Arm Guard Raptor Shield offers a unique solution to preventing raptor nesting problems without creating secondary eyesore problems. The arm guard was developed by utility personnel in the picturesque Chesapeake Bay area where unsightly and or obtrusive animal guards were not considered a viable option.

The sloped surface will automatically shed any nesting materials placed on the surface. The

Arm Guard Raptor Shield is manufactured from a clear polymer which exhibits high resistance to outdoor weathering, impact resistance & UV degradation.

The Arm Guard comes pre-drilled for easy mounting on wooden cross arms. Alternatively, the Arm Guard Raptor Shield can be installed on concrete or fiberglass cross arms with the use of cable straps.

Arm Guard Raptor Shield

USAG-001

Raptor Shield USAG

USAG-001 ARM GUARD RAPTOR SHIELD

Eliminate Nesting

Problems!

Page 13: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

22

Overhead Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

Varmint Shield

USVS

Varmint Shield USVS

Installs with a Shotgun

Stick!

USVS-001 16” VARMINT SHIELD - GRAY

USVS-002 16” VARMINT SHIELD - RED

USVS-003 20” VARMINT SHIELD - GRAY

USVS-004 20” VARMINT SHIELD - RED

Overhead Cutouts 24

Expendable Fuse Tube Caps 26

Overhead Fuse Cutouts

Product Dimensions: 16” / 20” diameter x .5 “ thicknessProduct Weight: 14 oz / 1 lb 5 ozColor: Gray or Red

The Varmint Shield is the proactive approach to eliminating animal related electrical service interruptions. The varmint shield prevents critters from simultaneously touching the primary and metal case of a transformer. The varmint shield can also be installed about substation insulators and bushings. The unique design permits the unit to be installed quickly with an insulated shotgun stick and without the need to drop service or expose the lineman to energized equipment during installation.

The Varmint Shield is molded from a UV stabilized and flame retardant (UL 94 V-0) polymer to provide many years of maintenance free in field service. The unique design will not trap or accumulate fallen leaves and has no spring components to break off, especially during cold weather installations. The Varmint Shield will handle all

distribution system applications and can simultaneously address both high

voltage bushing and adjacent arrestor bushing. Diameter lines are molded into the unit to provide an accurate and easy in-field cutting template on bushing diameters ranging from 1.75” to 6”.

Page 14: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

25

Overhead Fuse Cutouts

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

24

Overhead Fuse Cutouts

USCO-005

Overhead Cutouts

Overhead Cutout USCO

USCO

USCO-003

Utility Solutions offers both porcelain and polymeric cutouts for systems rated at 15kV and 27kV.

Utility Solutions Cutouts are RUS approved. Utility Solutions Cutouts meet and or exceed all applicable ANSI performance requirements with testing performed at an accredited independent laboratory.

Utility Solutions cutouts are manufactured with the following features standard:

All electrical contacts are silver plated.Tin plated parallel grooves are standard. Groove 1 handles #6 solid through #6 stranded.Groove 2 handles #2 solid through 25 mil or 4/0 ACSR.

Heavy-duty galvanized sleet shield, arcing horns and NEMA Type

B brackets are standard.Polymeric cutouts are manufactured out

of 100% silicone rubber, not a polymer alloy.

All mechanical fasteners are manufactured from 304 stainless steel.

Now RUS Approved!

USCO-003

VOLTAGE RATING

CONTINUOUS CURRENT

BIL LEVEL

INTERRUPTION LEVEL

LEAKAGE DISTANCE

SHIPPING SIZE

SHIPPING WEIGHT

USCO-005 15 kV 100 AMP 110 kV 10 kA (ASYM) 12.6” 17” x 14.5” x 5” 12 lb 14 oz

USCO-007 27 kV 100 AMP 150 kV 8 kA (ASYM) 24.8” 20” x 15.5 x 5” 14 lb 12 oz

USCO-008 27 kV 100 AMP 150 kV 12 kA (ASYM) 24.8” 20” x 15.5 x 5” 14 lb 12 oz

EQUIVALENT TO:

USCO-001 USCO-003 USCO-004

S&C 89021R10-CD 89022R10-CD 89033R10-CD

A.B. Chance C710-112PB C710-211PB C710-213PB

Overhead Cutout USCO

USCO-007

EQUIVALENT TO:

USCO-005 USCO-007 USCO-008

S&C 89021R10-PCD 89022R10-PCD (150 kV BIL)

89052R10-PCD (150 kV BIL)

A.B. Chance CP710112-PB CP710211-PB CP710213-PB

see chart above

Porcelain

Polymeric

VOLTAGE RATING

CONTINUOUS CURRENT

BIL LEVEL

INTERRUPTION LEVEL

LEAKAGE DISTANCE

SHIPPING SIZE

SHIPPING WEIGHT

USCO-001 15 kV 100 AMP 110 kV 10 kA (ASYM) 8.5” 19” x 13.5” x 4.5”

17 lb 8 oz

USCO-003 27 kV 100 AMP 125 kV 8 kA (ASYM) 11.0” 15.5” x 13” x 5” 21 lb 8 oz

USCO-004 27 kV 100 AMP 125 kV 12 kA (ASYM) 11.0” 15.5” x 13” x 5” 21 lb 8 oz

Page 15: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

26

Overhead Fuse Cutouts

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

Utility Solutions Expendable Fuse Caps are manufactured in accordance with ANSI C37.42 design criteria concerning thread pitch and venting pressure. The Utility Solutions line of expendable caps will work on all 100 and 200 Amp expendable fuse tubes. Stamped “E” on button head signifies Expendable Cap.

The USCO-062 & USCO-063 use a “stove pipe” design which directs expelled gases vertically for close horizontal phase-to-phase construction.

Expendable Fuse Tube Caps

USCO

Overhead Cutout USCO

USCO-060 100 AMP EXPENDABLE FUSE TUBE CAP

USCO-061 200 AMP EXPENDABLE FUSE TUBE CAP

USCO-062 100 AMP STOVEPIPE EXPENDABLE FUSE TUBE CAP

USCO-063 200 AMP STOVEPIPE EXPENDABLE FUSE TUBE CAP

USCO-060 USCO-061 USCO-062 USCO-063GE Durabute part number 9F34ALW032 - 9F34ALW028 9F34ALW029

A.B. Chance W700-0345 - - -

ABB part number 3872A21G01 161A292H04 3872A23G01 403A062G03

Cooper part number F024X1C F085X1C - -

Kearney part number 129052 129023 - -

Fuse Tube Amperage Type 100 Amp 200 Amp 100 Amp 200 Amp

Size 1.1” dia x 5/8” high 1.4” dia x 5/8” high 1.1” dia x 1.4” high 1.4” dia x 1.5” high

Weight 1 oz 2 oz 2 oz 3 oz

Elbow-Mule™ 28

Universal URD Wrench 29

Pad Mount Multi-Tool 29

Strip-N-Coil™ 30

Underground Distribution

Page 16: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

29

Underground Distribution

28

Underground Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Product Dimensions: 24” x 7” x 1.5”Product Weight: 3 lb 14 oz

The Elbow-Mule™ is a standard insulated shotgun stick attachment designed to remove stubborn seized elbows without applying destructive and dangerous kinetic impact force.

The Elbow-Mule™ applies consistent, controlled force in a highly localized manner to free even the most stubborn elbow assembly.

The attachment legs permit an operator to utilize the tool on a wide variety of transformer configurations and are manufactured from insulated fiberglass to provide maximum safety to the operator and equipment.

Elbow-Mule™

USEP-15-27/35

Elbow-Mule™ USEP

RemoveStubbornElbows!

USEP-15-27 15 kV & 27 kV ELBOW-MULE™ WITH STORAGE BAG

USEP-35 38 kV ELBOW-MULE™ WITH STORAGE BAG

USEP-15-27

Universal URD Wrench

USUW-001

URD Wrench / Pad Mount Multi-Tool

Aluminum & Stainless Construction!

Penta-head Wrench

3/4” Hex Wrench

Product Dimension: 12” x 5” x 2.5”Product Weight: 12 oz

The universal URD wrench is a multi-functional tool designed specifically for utility field personnel responsible for both electrical and water services.

The URD Wrench features an ANSI penta-head as well as a standard six point ¾” wrench incorporated on opposite ends of the handle. The stainless steel shaft permits the easy prying of manhole covers and is also great for removing debris from pad gear lock pockets. The shaft end doubles as a flat head screwdriver.

Product Dimension: 10“ x 6“Product Weight: 1 lb 9 ozAll sockets 1/2 “ drive

The Pad Mount Multi-Tool reduces the number of tools required by an individual to access pad gear. The Pad Mount Multi-Tool is supplied with the following easily interchangeable ½” drive sockets:

Pad Mount Multi-Tool USMT-001 Fits Nearly Every Type

of Pad Gear on Every Utility System!

USUW-001 UNIVERSAL URD WRENCH

USMT-001 PAD MOUNT MULTI-TOOL

3/4” Socket5 Point Penta Socket9/16” Deep Well SocketDrag Link Socket

The elongated lug wrench design permits the user to apply substantial torque to free stubborn fasteners, especially penta-head bolts located near ground level.

The lug wrench body is manufactured from chrome plated cold rolled steel to provide years of trouble free field use.

USUW/USMT

Page 17: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

30

Underground Distribution

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

Strip-N-Coil™

USCS-001

Strip-N-Coil™

USCS-001 STRIP-N-COIL™

Product Dimension: 1.75” Dia x 7.5”Product Weight: 6 oz

The Strip-N-Coil™ is a time saving tool that permits easy cutting of the outer insulation on underground cables. Quickly twist the concentric neutrals into a tight compact bundle for cutting. It can also be used to install or remove bushing inserts.

No more tedious twisting with pliers. The Strip-N-Coil™ is designed for underground cable from #2 through 750 MCM.

The Strip-N-Coil™ requires an electric drill or a ratchet fitted with a 7/16” socket.

USCS

BLUE STRIPE® Telescopic Hot Sticks

34

BLUE STRIPE® Shotgun Sticks 36

Snap On Adapters for Disconnect Sticks

40

BLUE STRIPE® Sectional Disconnect Sticks

38

Fiberglass Hot Sticks

BLUE STRIPE® Foam Filled Straight Sticks

42

Boom Holster 43

BLUE STRIPE® Severe Weather Stick

44

BLUE STRIPE® Measuring Sticks 41

BLUE STRIPE® Rescue Hook 44

continued. . .

Protective Bags for Fiberglass Sticks

45

Page 18: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

Hot Stick Accessories 46

Fiberglass Hot Sticks

Bucket Stick Storage Case 45

BLUE STRIPE® Hot Stick Wax & Cleaner

49

BLUE STRIPE® Cloth & Wipes 48

continued

Spline Torque Bar 46

Page 19: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

35

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

34

Fiberglass Hot Sticks

The most vulnerable parts of any stick are the spring loaded plastic buttons and the spline ends. Molded and cast parts can be less expensive to produce, but are often less durable. We machine each button and aluminum spline end out of solid material.

Our patent pending Easy Tip Lock Replacement feature saves time and money. Buttons can be replaced without sacrificing the entire tip section. The repair is easy enough to be done in the field so sticks stay on the job longer and repair costs go down. Bucket operable models not available with Tip Lock feature.

Conventional fiberglass construction uses a woven matt. This creates pockets and voids where dirt and moisture can collect. Our unique non-woven fiberglass is unidirectional which creates a smoother surface. The BLUE STRIPE® Fiberglass Hot Sticks have a lineman friendly grip, stay cleaner longer, and are easier to clean and meet standards.

BLUE STRIPE® Telescopic Hot Sticks

Telescopic Sticks USTS Telescopic Sticks USTS

SIZE CLOSED LENGTH

BASEDIAMETER

NO. OF SECTIONS

WEIGHT OPERATING LENGTHS

PROTECTIVEBAG

GROUND OPERABLEUSTS-050 50 FT. 68” 3 1/2” 11 20 lb 50’,45’,40’,35’,30’ USSB-006

USTS-045 45 FT. 66” 3 1/8” 10 16 lb 8 oz 45’,40’,35’,30’,26’ USSB-006

USTS-040 40 FT. 65” 2 7/8” 9 13 lb 8 oz 40’,35’,30’,26’,21’ USSB-006

USTS-035 35 FT. 63” 2 5/8” 8 11 lb 35’,30’,26’,21’,17’ USSB-006

USTS-030 30 FT. 62” 2 3/8’ 7 8 lb 14 oz 30’,26’,21’,17’ USSB-006

USTS-025 25 FT. 60” 2 1/8’ 6 6 lb 14 oz 26’,21’,17’ USSB-005

USTS-020 20 FT. 58” 1 7/8” 5 5 lb 3 oz 21’,17’ USSB-005

USTS-016 16 FT. 56” 1 5/8’ 4 4 lb 16’,12’ USSB-005

USSA-ETE* 5 FT. 56” 1 1/4’ 1 1 lb adds 56” USSB-005

BUCKET OPERABLEUSTS-012 12 FT. 30” 2 5/8” 7 5 lb 11 oz 12’ USSB-003

USTS-010 10 FT. 28” 2 3/8’ 6 4 lb 11 oz 10’ USSB-003

USTS-008 8 FT. 26” 2 1/8’ 5 3 lb 11 oz 8’ USSB-003

USTS-006 6 FT. 26” 1 7/8” 4 2 lb 8 oz 6’ USSB-003

USTS-004 4 FT. 26” 1 5/8’ 3 2 lb 4’ USSB-003

*The USSA-ETE foam filled extensions add length to any telescopic hot stick.

Heavy Duty Rubber End Cap OptionUSTS-045-BOOT 45 FT. HEAVY DUTY RUBBER END CAP

USTS-040-BOOT 40 FT. HEAVY DUTY RUBBER END CAP

USTS-035-BOOT 35 FT. HEAVY DUTY RUBBER END CAP

USTS-030-BOOT 30 FT. HEAVY DUTY RUBBER END CAP

SMOOTHER SURFACE

EPOXY RESINThe BLUE STRIPE® Fiberglass Hot Stick line uses Epoxy resin which is the most water resistant, durable, and longest lasting resin available and has superior electrical properties. Our sticks have a very high resistance to failure due to water absorption or delamination.

HIGH PERFORMANCE CLOSED CELL FOAMTip sections and foam filled sticks offer an added measure of safety by preventing water from entering the inside. Our superior Closed Cell Foam construction is durable and long lasting; extending the safety margin.

EASY TIP LOCK REPLACEMENT (patent pending)

BLUE STRIPE® PATENTED ALIGNMENT FEATUREThe most revolutionary design change to hot sticks since fiberglass is our patented BLUE STRIPE® alignment feature. Extending even our 50 footer is easy with this ingenious button alignment feature.

CNC MACHINED BUTTONS & SPLINE ENDS

APPROVED AND IN STOCKOur BLUE STRIPE® Fiberglass Hot Sticks meet all applicable industry standards, including OSHA Sub V Sec. 1926.951(d) and ASTM F1826. Our U.S. production capabilities are able to stay ahead of demand so we always have your next stick in stock.

Protect your Investment!

Add a Protective Bag

Need it fast? Items in green can ship in 24 hours. See our website for details.QUICK SHIP PROGRAM

Page 20: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

37

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

36

Fiberglass Hot Sticks

HOW TO ORDER:

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Fiberglass Hot Sticks

Utility Solutions proudly offers both internal rod and external rod fixed length shotgun sticks.

Every Utility Solutions shotgun stick is manufactured from the highest electrical

grade insulated fiberglass and meet or exceed all applicable industry performance criteria including ASTM F711, IEC 855, and OSHA Sub. R Section 1910.269 (J) and OSHA Sub. V Section 1926.951(d).

Some of the features found on Utility Solutions BLUE STRIPE® shotgun sticks include:

• Replaceable shotgun hanger hooks are not molded into the head making replacement quick and inexpensive if necessary.

• The patented BLUE STRIPE® is positioned on the shotgun stick to assist the operator by acting as a visual aide to minimize equipment drops. When the BLUE STRIPE® is positioned facing upward the stainless steel hook will open downward.

• The operating hook is manufactured from stainless steel to provide maximum strength when pulling, pushing or twisting stubborn equipment.

• Multiple rod guides ensure smooth operation of the external rod shotgun sticks.

• External rod shotgun sticks are filled with high performance closed cell foam to prevent water absorption.

• Universal spline ends are precision CNC machined from aircraft grade aluminum. Utility Solutions universal spline teeth simply will not shear off as commonly occurs on cast universal spline teeth.

BLUE STRIPE® Shotgun Sticks

Shotgun Sticks USSG

Rugged and Versatile!

Standard model internal and external shotgun sticks utilize a full view side break hook (hook pivots in the horizontal plane in relation to the hook release trigger).

Add the -BBH designation to any internal rod shotgun stick to specify a bottom break hook (hook pivots in the vertical plane in relation to the hook release trigger).

USSG-XXX-YYZZ-BBHoptional

Bottom Break Hook IR - InternalER - External

004 - 4ft Length006 - 6ft Length008 - 8ft Length010 - 10ft Length

EXAMPLE: USSG-006-EREC6’ External Rod Shotgun Stick with Rub-ber End Cap

Shotgun Sticks USSG

Catalog Number Length Weight PROTECTIVEBAG

USSG-004-IRZZ 4’ 6” 4 lb 4 oz USSB-005

USSG-004-ERZZ 4’ 6” 4 lb 4 oz USSB-005

USSG-006-IRZZ 6’ 6” 5 lb 3 oz USSB-007

USSG-006-ERZZ 6’ 6” 5 lb 6 oz USSB-005

USSG-008-IRZZ 8’ 8” 5 lb 14 oz USSB-009

USSG-008-ERZZ 8’ 8” 6 lb 3 oz USSB-009

USSG-010-IRZZ 10’ 6” 6 lb 13 oz USSB-011

USSG-010-ERZZ 10’ 6” 7 lb 5 oz USSB-011

EC - Rubber End Cap

SE - Universal Spline

FA - Female ½” Socket Adapter

Page 21: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

39

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

38

Fiberglass Hot Sticks Sectional Sticks USDS

BLUE STRIPE® sectional disconnect sticks snap together to create custom length tools with interchangeable end fittings for specific applications. The compact nature of sectional sticks eliminates the need to store long single piece sticks.

The interchangeability of end sections makes sectional sticks versatile – eliminating the need for duplication of tools.

All sections are foam filled and tested per ASTM F-711 and OSHA.

BLUE STRIPE® Sectional Disconnect Sticks

UNIVERSALSPLINE

RUBBEREND CAP

NEMA SWITCH-HEAD

EXTENSIONSECTION

Snap On Adapters available on next page

Sectional Sticks USDS

USDS-???-XX

SE - Universal Spline

SH - NEMA Switch Head

DH - Disconnect Head

B - Base Section

E - Extension Section

Catalog Number

Length Weight Catalog Number

Length Weight

1¼” Diamenter 1½” DiamenterUSDS-002-XX 1¼” X 2’ 1 lb 9 oz USDS-H04-XX 1½” X 4’ 2 lb 4 oz

USDS-004-XX 1¼” X 4’ 2 lb 1 oz USDS-H06-XX 1½” X 6’ 3 lb 5 oz

USDS-006-XX 1¼” X 6’ 2 lb 14 oz USDS-H08-XX 1½” X 8’ 4 lb 6 oz

USDS-008-XX 1¼” X 8’ 3 lb 9 oz USDS-H10-XX 1½” X 10’ 5 lb 15 oz

Sectional Disconnect Sticks are available in either 1¼” or the heavy-duty 1½” dia.(H). All sticks are available with five end choices. See below for ordering instructions.

see chart above

Page 22: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

41

Fiberglass Hot Sticks

40

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Snap On Adapters for Disconnect SticksThese snap on adapters are used in conjunction with our standard Sectional Disconnect Sticks.

Sectional Disconnect Storage Bags

MALE UNIVERSAL SPLINE

FEMALEBASE CAP

FEMALE UNIVERSAL SPLINE

MALEDISCONNECT HEAD

Catalog Number Description Catalog Number Description

USDS-OAM-SE 1¼” Dia. Male Universal Adapter USDS-HAM-SE 1½” Dia. Male Universal Adapter

USDS-OAF-SE 1¼” Dia. Female Universal Adapter USDS-HAF-SE 1½” Dia. Female Universal Adapter

USDS-OAF-EC 1¼” Dia. Series Cap USDS-HAF-EC 1½” Dia. Series Cap

USDS-OAM-DH 1¼” Dia. Male Disconnect Adapter USDS-HAM-DH 1½” Dia. Male Disconnect Adapter

Sectional Disconnect Storage Bags are water resistant, mold resistant and include folded end snap locks as well as a carrying strap.

Disconnect Stick Length One Pocket Case Two Pocket Case Three Pocket Case Four Pocket Case

2’ Length USDS-BAG-32 USDS-BAG-42

4’ Length USDS-BAG-14 USDS-BAG-24 USDS-BAG-34 USDS-BAG-44

6’ Length USDS-BAG-16 USDS-BAG-26 USDS-BAG-36 USDS-BAG-46

8’ Length USDS-BAG-18 USDS-BAG-28

10’ Length USDS-BAG-110

Snap on Adapters are Interchangeable on any corresponding 1¼” Dia and 1½” Dia Sectional Disconnect Sticks.

Snap on Adapters allow for the creation of double ended sectional sticks with multiple end attachments per the users required needs.

Sectional Sticks USDS

see charts above

Measuring Stick USTS-M

The BLUE STRIPE® Measuring Stick is our standard Telescopic Hot Stick with large, clear print running along side our patented BLUE STRIPE® feature. Available in English (EM) or Metric (MM) versions, this stick allows for easy and accurate measuring while still functioning as a normal telescoping hot stick.

Our Measuring Stick is the only round, telescoping hot stick available in EIGHT different sizes. Choose from 16’ to 50’, English or Metric versions.

Our epoxy resin and unique non-woven fiberglass construction creates a smoother surface that resists water absorption. Our CNC machined spline end and buttons will hold up to the rigors of daily use.

BLUE STRIPE® Measuring Sticks

ENGLISH METRIC SIZE CLOSED LENGTH

WEIGHT OPERATING LENGTHS

USTS-050-EM USTS-050-MM 50 ft. 15.2 m 68” 20 lb 50’,45’,40’,35’,30’

USTS-045-EM USTS-045-MM 45 ft. 13.7 m 66” 16 lb 8 oz 45’,40’,35’,30’,26’

USTS-040-EM USTS-040-MM 40 ft. 12.2 m 65” 13 lb 8 oz 40’,35’,30’,26’,21’

USTS-035-EM USTS-035-MM 35 ft. 10.6 m 63” 11 lb 35’,30’,26’,21’,17’

USTS-030-EM USTS-030-MM 30 ft. 9.1 m 62” 8 lb 14 oz 30’,26’,21’,17’

USTS-025-EM USTS-025-MM 25 ft. 7.6 m 60” 6 lb 14 oz 26’,21’,17’

USTS-020-EM USTS-020-MM 20 ft. 6.2 m 58” 5 lb 3 oz 21’,17’

USTS-016-EM USTS-016-MM 16 ft. 4.9 m 56” 4 lb 16’,12’

MM - Meters / CentimetersEM - Feet / Inches

see chart above

NEW

Page 23: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

43

Fiberglass Hot Sticks

42

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

All Utility Solutions straight sticks are manufactured from the highest quality electrical grade fiberglass. Wall thickness has been engineered to provide the utmost in mechanical strength to meet the rigors of in field pushing, pulling or twisting of stubborn equipment. Each stick interior is filled with a high performance closed cell foam to prevent water absorption. The stick exterior has been chemically sealed to provide a smooth surface texture for easy cleaning.

Utility Solutions straight sticks meet or exceed all applicable industry performance criteria including ASTM F711, ASTM F1826 and OSHA Sub. V sec. 1926.951(d).

BLUE STRIPE® Foam Filled Straight Sticks

Straight Sticks USSS

USSS

UNIVERSAL SPLINE(SE)

RUBBER END CAP(EC)

NEMA SWITCH-HEAD(SH)

DISCONNECT HEAD(DH)

DIAMETER LENGTH(4’,6’,8’,10’)

ENDS(choose two) Example

USSS-0 or H-1¼” or 1½”

04 or 06- 08 or 10-

EC - Rubber End CapSE - Universal Spline

SH - NEMA Switch-headDH - Disconnect Head

USSS-H08-EC/SE

USSS-XYY-ZZ/ZZEC - Rubber End CapSE - Universal SplineSH - NEMA Switch HeadDH - Disconnect Head

(CHOOSE TWO)can be the same two

O - 1¼” DiameterH - 1½” Diameter

04 - 4ft Length06 - 6ft Length08 - 8ft Length10 - 10ft Length

EXAMPLE: USSS-H08-EC/SE8’ 1½” Dia. Straight Stick with Endcap & Switchhead

Design Your Own!

Boom Holster USBC

Boom Holster

The Boom Holster is a unique, two-piece hot stick holder that easily mounts on a boom. The rugged molded design is spring loaded at one end so an operator can remove and insert a hot stick with just one hand.

Disconnect and NEMA Switch heads conveniently fit into a slot closest to the operator. The Boom Holster is a convenient and safe way to secure a hot stick.

Installation is quick and easy with 3 supplied straps, ratchets and rubber pads. It mounts on round, square, or oval booms of any size.

The Boom Holster can hold any length stick and adjusts to accommodate different sticks easily.

USBC-002

USBC-002 BOOM HOLSTER WITH STRAPS

Your Favorite Stick is always within reach!

Page 24: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

44 45

Fiberglass Hot Sticks Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™ Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER: HOW TO ORDER:

Product Dimensions: 8 1/3 ft. / 10 1/3 ft.Product Weight: 5 lb / 6 lb

The Utility Solutions Rescue Hook is designed to remove an injured worker from a hazardous situation including confined spaces, on or near electrical gear, or in vaults.

The hook portion is manufactured out of tempered steel and then powder-coated in high visibility safety yellow to resist corrosion and meets or exceeds ASTM F711.

The innovative design allows for the unit to ship as two separate components, resulting in substantial shipping savings without sacrificing strength or toughness.

BLUE STRIPE® Rescue Hook

USRH-006/8

USRH-006 RESCUE HOOK 6 FT.

USRH-008 RESCUE HOOK 8 FT.

Rescue Hook/ Storm Stick USRH/USSS

BLUE STRIPE® Severe Weather Stick

Severe Weather Sticks provide a lineman with extra protection during inclement weather. The tool consists of two rubber skirts added to the straight sticks that disrupt water from forming an electrical path along the stick, thereby improving the dielectric properties of the stick.

Available only in the universal spline end / rubber end cap configuration.

USSS

USSS-006-STORM 1¼” X 6’ STORM STICK

USSS-008-STORM 1¼” X 8’ STORM STICK

USSS-010-STORM 1¼” X 10’ STORM STICK

USSS-H06-STORM 1½” X 6’ STORM STICK

USSS-H08-STORM 1½” X 8’ STORM STICK

USSS-H10-STORM 1½” X 10’ STORM STICK

Extra Protection!

HOW TO ORDER:

Utility Solutions offers a complete line of fiberglass hot stick storage bags. Every bag is water resistant, mold resistant and incorporates a folded end snap lock.

Protective Bags for Fiberglass Sticks

Bags & Cases USSB/USBC

Protect Your Investment!

USSB

SIZE FITS

USSB-003 Protective Bag 6” X 36” USTS-004 thru USTS-012

USSB-005 Protective Bag 6” X 63” USSG-004, USSS-004, USTS-16 thru USTS-025

USSB-006 Protective Bag 8.5” X 75” USTS-030 thru USTS-050

USSB-007 Protective Bag 6” X 7’ USSG-006, USSS-006

USSB-009 Protective Bag 6” X 9’ USSG-008, USSS-008

USSB-011 Protective Bag 6” X 11’ USSG-010, USSS-010

Product Dimension: 4 “ x 4 “ x 32 “Product Weight: 4 lb 8 oz

The Utility Solutions bucket stick storage case will work with any size bucket sick on the market. Molded from tough waterproof blue polymer the bucket case conveniently clips to

the side of the bucket without the need to drill or otherwise modify the bucket. The cover is secured to the base to prevent accidental loss and drainage holes in the base provide rain drainage to ensure the interior stays dry. The cover/base design permits bucket stick storage without the need to rotate the hot stick probe end and permits one to grab the stick body when removing so as not to extend the stick.

Bucket Stick Storage Case

Convenient& Versatile!

USBC

See Chart Above

SIZE FITS

USBC-001 Bucket Storage Case

4” X 32” ALL 4’ thru 12’ BUCKET STICKS

Page 25: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

47

Fiberglass Hot Sticks

46

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Product Dimensions: ¼” Dia. x 18”Product Weight: 1 lb

The Spline Torque Bar allows an operator to apply increased torque at a safe distance to insulated shotgun stick applications (when equipped with a universal spline end).

Tool consists of foam filled insulated fiberglass with a foam grip for operator comfort. Specially designed universal end is precision CNC machined from aluminum grade bar stock for superior strength.

Spline Torque Bar

Stick Accessories

Hot Stick AccessoriesWe offer a wide range of hot stick accessories. All are tested and fit on a standard Universal Spline(SE).

Catalog Number

Name Weight Page

USSA-ETE 56” FIBERGLASS EXTENSION SPLINE ATTACHMENT 1 lb 35

USSA-ASD POLYMERIC ICE REMOVAL SPLINE ATTACHMENT 1 lb

USSA-BRH POLYMERIC REMOVAL HOOK SPLINE ATTACHMENT 4 oz

USSA-HGR PLASTISOL HANGER & CLAMP 4 oz

USSA-HOE HOE ATTACHMENT 8 oz

USSA-MSC SHOESTRING CUTTER SPLINE ATTACHMENT (METAL) 4 oz

USSA-ODP DOUBLE PRONG STICK END 4 oz

USSA-OEC RUBBER END CAP FOR 1 1/4” DIA. FIBERGLASS 4 oz

USSA-OHP UNIVERSAL HOTSTICK PROBE 8 oz

USSA-OHP-F UNIVERSAL HOTSTICK PROBE WITH HI VISIBILITY FLOURESCENT COATING

8 oz

USSA-ORB ROTARY BLADE SPLINE ATTACHMENT 4 oz

USSA-ORP ROTARY PRONG SPLINE ATTACHMENT 4 oz

USSA-OSE UNIVERSAL SPLINE END FOR 1 1/4” DIA. FIBERGLASS 6 oz

USSA-PSC SHOESTRING CUTTER SPLINE ATTACHMENT (PLASTIC) 4 oz not shown

USSA-STB-018 18” TORQUE BAR SPLINE ATTACHMENT 1 lb Below

USSA-TSA 1/4”-20 THREADED STUD SPLINE ADAPTER 4 oz

HAVE AN IDEA. . . NEED SOMETHING SPECIAL?We are constantly designing and engineering new tools and products for the electric power industry. Call or email us with YOUR ideas!

USSA

USSA-STB-018

Stick Accessories USSA

USSA-OHPUSSA-OEC USSA-OHP-F

USSA-ORPUSSA-ORB USSA-OSE

USSA-BRH USSA-ASD USSA-HGR

USSA-ODPUSSA-HOE USSA-MSC

USSA-TSA

Page 26: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

49

Fiberglass Hot Sticks

48

Fiberglass Hot Sticks

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Size: 18” x 18” (approximately)

Microfiber silicone impregnated hot stick wiping cloth.

Our unique microfiber material both contains more silicone and traps more dirt, dust and debris. Our cloth comes with a durable clear bag that is resealable.

The BLUE STRIPE® Cloth imparts a clear protective film of silicone on a hot stick. It complies with the OSHA requirement of daily inspection and wiping of high voltage rated fiberglass hot sticks.

BLUE STRIPE® Cloth

Cleaning Supplies Cloth & Wipes

OSHA Requires Daily Inspection & Wiping of

Hot Sticks.

USTS-SILCLOTH

BLUE STRIPE® Wipes

Size: 8” x 12” Towel

Our daily hot sticks wipes are pre-moistened with silicone to leave behind a thin protective water repellent surface.

Perform a light cleaning and leave a thin layer of silicone on your hot stick every day to comply with OSHA requirements of daily inspection and wiping of high voltage rated fiberglass hot sticks.

Our BLUE STRIPE® Wipes come in our convenient dispenser box of 50 to mount on a wall.

USTS-SILWIPE

Convenient Dispenser Box Can Be Wall

Mounted!

USTS-CLOTH BLUE STRIPE® CLOTH

USTS-SILWIPE BLUE STRIPE® WIPES (BOX OF 50)

14 oz. cans

Our high grade Carnauba wax creates a high temperature, water resistant durable finish on fiberglass, gelcoat, painted metal and wood surfaces.

A good coat of Carnuba wax on any fiberglass product is recommended on a routine basis. Carnuba wax inherently repels water and dirt to optimize dielectric properties. Stay OSHA compliant and extend the life of your hot stick with our BLUE STRIPE® Hot Stick Wax.

BLUE STRIPE® Hot Stick Wax

Cleaning Supplies Wax & Cleaner

Create a High Temp, Water Resistant Finish!

USTS-WAX

BLUE STRIPE® General Purpose Cleaner

1 US Gallon as mixed

We have created a specially formulated neutral cleaner for tools, trucks, fiberglass, painted surfaces, rubber goods and most any non-absorbing surface.

USTS-CLEANER

Freight SavingShips Concentrated!

USTS-WAX BLUE STRIPE® HOT STICK WAX - 14oz CAN

USTS-CLEANER BLUE STRIPE® GENERAL PURPOSE CLEANER - 1 Gallon as mixed

Page 27: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

Meter Grabber 52

Electric Meter Jumper Leads 53

Metering Products

Low Voltage Bypass Tool 54

Page 28: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

53

Metering Products

52

Metering Products

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Product Dimensions: 6.8 “ dia. x 15.5 “Product weight: 2 lb 6 ozColor: Clear with water cooler blue tint

The Utility Solutions Meter Grabber is an indispensable tool for electric meter installation, removal or change-outs. The Meter Grabber provides superior protection from exploding meters due to faults.

Operator protection is paramount therefore the Meter Grabber has no metal components about the tools working end. Side slots permit venting during a fault. The working end of the tool provides a positive capture around the entire base, eliminating the chance of a dropped or broken meter as well as offering additional mechanical leverage when removing stubborn meters.

Molded of a rugged polymer the tool is rugged, lightweight and tinted to allow the operator to visually observe the entire

operation.

Meter Grabber

Safely Install and Remove ALL Electric Meters!

USMG

USMG-001 METER GRABBER

USMG-002 WITH ARC SHIELD RINGS

USMG-001-BAG CARRYING BAG FOR USMG-001

USMG-002-BAG CARRYING BAG FOR USMG-002

Meter Grabber USMG

Shown with optional arc shield foradditional operator safety. (USMG-002)

Optional carrying bag is constructed of heavy-duty water resistant fabric with a polymeric base.

WATCH

VIDEO

ONLINE!

Our Electric Meter Jumper Lead sets are a convenient and safe method to prevent a customer outage during a meter removal or change-out. They are constructed from #6 AWG highly flexible insulated copper.

The ferrule ends are machined of solid copper for utmost performance and beveled for easy push on installation. Simply push the meter lead end over the bypass horn and turn the knurled handle until the lead is tightly secured in place.

Leads are available with a 100 AMP breaker option (USJL-002). The resettable single pole 240 volt hydraulic breaker allows for added safety and protection of property.

USJL-001/002

USJL-001 ELECTRIC METER JUMPER LEADS - FERRULE END (SET OF TWO)

USJL-002 ELECTRIC METER JUMPER LEADS - FERRULE END WITH 100 AMP BREAKER (SET OF TWO)

USMG-001-BAG CARRYING BAG FOR USJL-001

Jumper Leads USJL

Ferrule End

Electric Meter Jumper

USJL-001

USJL-002

Optional carrying bag is constructed of heavy-duty water resistant fabric with a polymeric base.

Page 29: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

54

Metering Products

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

The Low Voltage Bypass Tool can be used as a portable switch to pick-up and drop secondary loads between a transformer and an electric meter. Includes #6 AWG highly flexible insulated copper cable with solid copper ferrule ends.

The resettable single pole 240 volt hydraulic breaker allows for safe load pick-up and load break operations. The Low Voltage Bypass Tool can be used to bypass liquid fuse holders that cannot be opened under load, as well as pick-up or drop load over secondary isolators.

Used with standard utility approved secondary cable connectors.

USJL-005 & 006

USJL-005 LOW VOLTAGE BYPASS TOOL - 100 AMP

USJL-006 LOW VOLTAGE BYPASS TOOL - 200 AMP

USMG-001-BAG CARRYING BAG FOR USJL-005 or USJL-006

Low Voltage Bypass Tool USJL

Low Voltage Bypass Tool

Optional Carrying Bag

Load-Trainer™ 56

Grounds Tester 58

Tool Demonstration Trailers 59

Safety & Training

Page 30: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

57

Safety & Training

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

56

Safety & Training

Load-Trainer™

Load-Trainer™ XFMR

TRAININGThe Load-Trainer™ is a fully functional electrical trainer that allows for the simula-tion of most distribution transformer connection schemes. This makes the Load-Trainer™ a valuable addition to any safety and training program.

The Load-Trainer™ transformer trainer & simulator has the capabil-ity to connect single-phase and the following types of three-phase transformers:

• Delta-Delta• Delta-Wye• Open Delta-Open Delta• Wye-Delta• Wye-Wye• Wye (one leg out)-Open Delta

SIMULATION Hidden toggle switches can be manipulated to introduce common infield problems at the time of installation or after the installation has been performed. Some of these include:• Low voltage bushing hook-ups

• Polarity• Back-feed• High side phasing• Open primary• Open secondary

Training = Safety!

XFMR-3BUSHING LOAD-TRAINER™ THREE BUSHING TRANSFORMER SIMULATOR

XFMR-4BUSHING LOAD-TRAINER™ FOUR BUSHING TRANSFORMER SIMULATOR

XFMR-PRM PHASE ROTATION METER

XFMR-LEADS ASSORTMENT OF EXTRA BANANA LEADS

XFMR-3BUSHING-PRL ADDITIONAL THREE BUSHING FRONT PANEL

XFMR-4BUSHING-PRL ADDITIONAL FOUR BUSHING FRONT PANEL

FLEXIBLE There are two Load-Trainer™ models. The XFMR-3BUSH-ING simulates low side voltage three bushing transformers. The XFMR-4BUSHING simulates low side voltage four bushing trans-formers. The XFMR-PRL option supplies an additional front panel that acts as a slave unit to the standard front panel. Note: 3BUSHING design does NOT permit open primary or open secondary simulation, only the 4BUSHING design.

The Load-Trainer™ transformer simulator and trainer is wheel por-table, compact and easily transported. The unit is powered using a conventional 110 VAC power outlet.

Load-Trainer™ XFMR

See Chart Above

Page 31: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

59

Safety & Training

58

Safety & Training

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Product Dimension: 20 “ x 15 “ x 7.5 “Product Weight: 45 lbs

The USGT-600 Grounds Tester provides a straightforward means of evaluating in service grounding assemblies in compliance with ASTM standards. An in unit voltmeter allows the operator to determine pass/fail criteria of various lengths of cable sizes #2 through double 4/0.

REACH Technology saves time and eliminates guess work by troubleshooting failed grounding assemblies and isolating the failure location.

The USGT-600 Grounds Tester requires a120 Volt power supply. The device is contained in a rugged case and ships with both brass ball stud and brass flat head electrodes.

Grounds Tester

USGT-600

Grounds Tester USGT

Isolates Failure Location!

USGT-600 GROUNDS TESTER

USGT-600-15KVELBOW 15 kV LOAD BREAK ELBOW ADAPTER(FEMALE)

USGT-600-15KVBUSHING 15 kV LOAD BREAK BUSHING ADAPTER(MALE)

USGT-600-27KVELBOW 27 kV LOAD BREAK ELBOW ADAPTER (FEMALE)

USGT-600-27KVBUSHING 27 kV LOAD BREAK BUSHING ADAPTER(MALE)

USGT-600-SUB 3 1/8” OD SUBSTATION CLAMP ADAPTER

27 Kv ELBOWUSGT-600-27KVELBOW

27 Kv BUSHINGUSGT-600-27KVBUSHING

15 Kv ELBOWUSGT-600-15KVELBOW

15 Kv BUSHINGUSGT-600-15KVBUSHING SUBSTATION CLAMP

ADAPTER

ACCESSORY ADAPTERSAccessory adapters allow for the testing of assemblies with 15kV or 27kV load break elbow terminations, 15kV or 27kV bushing terminations and a 3 1/8” OD adapter for testing substation clamps.

Utility Solutions tool demonstration trailers provide an excellent means to evaluate hot line tools in a hands on setting. Utility Solutions periodically upgrades each of our trailers to reflect our constantly growing array

of products. Additionally our USGT-600 Grounds Tester and XFMR Load Trainer Transformer Simulator are fully functional (requires a 110 VAC power supply).

Trailers are located about the United States and Canada. Call your local sales representative to schedule a trailer visit at your earliest convenience.

Tool Demonstration Trailers

Hands on Demos Right in Your Parking Lot!

TRAILER CALL YOUR REPRESENTATIVE

Demonstration Trailers TRAILER

USI currently has 7 trailers throughout North America. Check our website for details.

Call your Rep for a Demo!

Page 32: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

Insulated Rubber Blankets 62

Blanket Buttons 63

63Blanket Clamp

64Klondike Clamp

65Blanket Mate Heavy Duty Blanket Holder

68Bucket Mate Polymeric Hook

66Jumper Hook

67Jumper-Aid™

Rubber Goods

Page 33: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

63

Rubber Goods

62

Rubber Goods

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Utility Solutions blankets meet or exceed all applicable ASTM D-1048 performance criteria. All blankets are Type II, manufactured from EDPM to provide maximum resistance to ozone damage. All blankets are Style A and free from any internal reinforcement for maximum flexibility. Utility Solutions blankets are molded in high visibility yellow color and every blanket is pre-tested at an independent NAIL certified laboratory to assure highest quality.

EVERY blanket is pre-tested and date stamped prior to shipping!

Insulated Rubber BlanketsPre-tested by

NAIL Approved Laboratory!

USRB

USRB-36-6-SLD 36” INSULATED RUBBER BLANKET - SOLID

USRB-36-28-SLT 36” INSULATED RUBBER BLANKET - SLOTTED

USRB-22-28-SLT 22” INSULATED RUBBER BLANKET - SLOTTED

Rubber Blankets USRB

CLASS SIZE DESIGN NO. EYES

WEIGHT

USRB-36-6-SLD 4 36” X 36” solid 6 8 lb 4 oz

USRB-36-28-SLT 4 36” X 36” slotted 28 8 lb 4 oz

USRB-22-28-SLT 4 22” x 22” slotted 28 2 lb 8 oz

Blanket Clamp

USBA-001 BLANKET CLAMP

USBA-002 BLANKET CLAMP - STICK OPERABLE

USBA-003 BLANKET BUTTONS

Blanket Clamps & Buttons USBA

USBA-001/002

USBA-001

USBA-002

Product Dimensions: 1“ dia. .75”Product Weight: 5 oz

Standard push button for installation of blankets that incorporate perimeter holes.

Blanket Buttons

USBA-003

Product Dimensions: 10 “ x 5 “ x .75 “Product Weight: 4 oz

USBA-001Hand operable Blanket Clamp.

USBA-002 Blanket Clamp designed for remote operation using a shotgun stick.

Page 34: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

65

Rubber Goods

64

Rubber Goods

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

The Klondike Clamp tool series quickly and safely secures blankets in position on poles without damaging the blankets. The Klondike Clamp tool series eliminates the need for tie wrap, bungee cords, Velcro®, tape or

any other means that are both time consuming to install and potentially damaging to the blanket.

The Klondike Clamp tool series can also be used in a myriad of pad mount equipment situations where it is difficult to secure the blanket by conventional means.

Molded from a tough weather resistant polymer and assembled completely with stainless steel hardware the Klondike Clamp tool series will provide a lineman with many years of maintenance free usage.

Klondike Clamp

Saves Time & Protects

Blankets!

USCP-001/002/003

USCP-001 6”-11” DIA. KLONDIKE CLAMP

USCP-002 11”-20” DIA. KLONDIKE CLAMP

USCP-003 6”-11” DIA. KLONDIKE CLAMP / SINGLE SPRING MECHANISM

Klondike Clamp USCP

USCP-001 USCP-002POLE RANGE 6” - 11” dia. 11” - 20” dia.

LENGTH 16” 23”

WEIGHT 8 oz 19 oz

USCP-001

USCP-002

The Blanket Mate Heavy Duty Blanket Holders solve the problem of safely and securely positioning a rubber insulating blanket. The tear drop shaped ends easily slide through the molded holes on a blanket. The strong, nearly indestructible Blanket Mate is quick and easy and protects both equipment and blankets.

Electrical insulating blankets come in many sizes and can weigh as much as 9 lbs. Choose from the USBM-001 6 magnet Blanket Mate or the USBM-002 8 magnet Blanket Mate, depending on what size blanket you need to secure.

All magnetic Blanket Mates are designed to conform to curved surfaces typically found on overhead apparatus and are manufactured from a unique polymer that remains strong and flexible even in cold weather.

This product comes with a 5 year unlimited warranty against breakage.

Blanket Mate Heavy Duty Blanket Holder

USBM-001/002

USBM-001 BLANKET MATE - 6 MAGNET

USBM-002 BLANKET MATE - 8 MAGNET

Blanket Mate USBM

Find it Hard to Position a

Blanket?

Page 35: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

67

Rubber Goods

66

Rubber Goods

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:HOW TO ORDER:

Product Dimensions: 11” x 4.5” x .5”Product Weight: 6 oz

The Jumper Hook is designed to eliminate jumper clamp sag and prevent potential cross-phasing situations without the time consuming use of tape, bungee cords or rope. The Jumper Hook also minimizes a jumper clamp swaying in high wind conditions.

Simply hang multiple Jumper Hook units along the intended jumper clamp path and let the tool cradle the jumper clamp. Easily installed by a gloved hand or with a shotgun stick the Jumper Hook will fit over any class 2 or 3 line hose and

exhibits a flash-over resistance of over 50 kV.

The Jumper Hook is made of a high visibility polymer material that can handle the rigors of daily use even in cold temperatures.

Jumper Hook

USJH-001

Jumper Hook USJH

USJH-001 JUMPER HOOK (6 per pack)

No More Jumper Lead

Sag!

Product Dimensions: 14” x 10” x 1”Product Weight: 1 lb 3 oz

The patented USJH-002 Jumper-Aid™ is designed to support a jumper wire during construction, maintenance, or repairs. It is particularly useful when a jumper is required to be in the vicinity of a conductor of a different voltage/phase. The USJH-002 allows for the mechanical jumper and or conductor to be supported while wrapped in an insulating rubber blanket and or line hose while eliminating the need for rope or tape. The pivoting nature of the USJH-002 offers positive locking about the jumper/conductor. The USJH-002 is also a useful tool to prevent jumper “sag” about a cross arm.

Jumper-Aid™

USJH-002

Jumper-Aid™ USJH

USJH-002 JUMPER-AID™

Page 36: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

68

Rubber Goods

Lineman driven. Field proven.

UTILITYSOLUTIONS

™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com

HOW TO ORDER:

Product Dimensions: 6.5” x 6.5” x .5”Product Weight: 5 oz

Unlike conventional molded bucket hooks, the Bucket Mate is machined from high performance polymer and far more rugged than traditional PVC. Nearly indestructible, even in cold temperatures.

The Bucket Mate is double ended allowing the large hook to accept a tool bag, while the opposing smaller ½” end will accept blanket holes without damaging the blanket.

Designate USBM-004-W to specify the wider slot Bucket Mate that can accommodate the next generation of thicker insulated buckets.

This product comes with a 5 year unlimited warranty against breakage.

USBM-004 BUCKET MATE POLYMERIC HOOK

USBM-004-W WIDE SLOT BUCKET MATE POLYMERIC HOOK

Bucket Mate USBM

Bucket Mate Polymeric Hook

USBM-004/004-W Finally. . . A Bucket Hook Designed for Extreme

Temperatures and Abuse!

Fiberglass Hot Stick Part Lists 70

88Sales Representative Directory

Appendix

93Index

USBM-004 USBM-004-W

1½”

Page 37: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

70 71

C-0

0836

C-0

0837

C-0

0839P-00

129

P-00

128

P-00

148

P-00

147

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-00

4 4

FT. T

ELES

CO

PIC

BU

CKE

T ST

ICK

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-00

4 B

utto

ns &

Spr

ings

Spe

cify

UST

S-00

4-B

UTT

ON

-KIT

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

158

C-0

0836

C-0

0837

C-0

0838

C-0

0841

P-00

130

P-00

129

P-00

128

P-00

149

P-00

148

P-00

147

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-00

6 6

FT. T

ELES

CO

PIC

BU

CKE

T ST

ICK

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-00

6 B

utto

ns &

Spr

ings

Spe

cify

UST

S-00

6-B

UTT

ON

-KIT

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

159

Page 38: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

72 73

C-0

0836

C-0

0837

C-0

0838

C-0

0840

C-0

0843

P-00

131

P-00

130

P-00

129

P-00

128

P-00

150

P-00

149

P-00

148

P-00

147

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-00

8 8

FT. T

ELES

CO

PIC

BU

CKE

T ST

ICK

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-00

8 B

utto

ns &

Spr

ings

Spe

cify

UST

S-00

8-B

UTT

ON

-KIT

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

160

C-0

0836

C-0

0837

C-0

0838

C-0

0840

C-0

0842

C-0

0845

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-01

0 10

FT.

TEL

ESC

OPI

C B

UC

KET

STIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-01

0 B

utto

ns &

Spr

ings

Spe

cify

UST

S-01

0-B

UTT

ON

-KIT

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

161

Page 39: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

74 75

C-0

0836

C-0

0837

C-0

0838

C-0

0840

C-0

0842

C-0

0844

P-00

133

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

152

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-01

2 12

FT.

TEL

ESC

OPI

C B

UC

KET

STIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-01

2 B

utto

ns &

Spr

ings

Spe

cify

UST

S-01

2-B

UTT

ON

-KIT

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

C-0

0846

P-00

162

C-0

0610

C-0

0620

C-0

0630

C-0

0641

P-00

130

P-00

129

P-00

128

P-00

127

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-01

6 16

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-01

6 B

utto

ns &

Spr

ings

Spe

cify

UST

S-01

6-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

159

Page 40: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

76 77

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0651

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-02

0 20

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-02

0 B

utto

ns &

Spr

ings

Spe

cify

UST

S-02

0-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

160

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0650

C-0

0661

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-02

5 25

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-02

5 B

utto

ns &

Spr

ings

Spe

cify

UST

S-02

5-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

P-00

161

Page 41: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

78 79

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0650

C-0

0660

P-00

133

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

152

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-03

0 30

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-03

0 B

utto

ns &

Spr

ings

Spe

cify

UST

S-03

0-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

C-0

0671

P-00

162

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0650

C-0

0660

C-0

0670

C-0

0681

P-00

134

P-00

133

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

153

P-00

152

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

P-00

163

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-03

5 35

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-03

5 B

utto

ns &

Spr

ings

Spe

cify

UST

S-03

5-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

Page 42: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

80 81

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0650

C-0

0660

C-0

0670

C-0

0680

C-0

0691

P-00

135

P-00

134

P-00

133

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

154

P-00

153

P-00

152

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

P-00

164

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-04

0 40

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-04

0 B

utto

ns &

Spr

ings

Spe

cify

UST

S-04

0-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0650

C-0

0660

C-0

0670

C-0

0680

C-0

0690

C-0

0701

P-00

136

P-00

135

P-00

134

P-00

133

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

155

P-00

154

P-00

153

P-00

152

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

P-00

165

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-04

5 45

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-04

5 B

utto

ns &

Spr

ings

Spe

cify

UST

S-04

5-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

Page 43: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

82 83

C-0

0610

C-0

0620

C-0

0630

C-0

0640

C-0

0650

C-0

0660

C-0

0670

C-0

0680

C-0

0690

C-0

0700

C-0

0710

P-00

137

P-00

136

P-00

135

P-00

134

P-00

133

P-00

132

P-00

131

P-00

130

P-00

129

P-00

128

P-00

127

P-00

156

P-00

155

P-00

154

P-00

153

P-00

152

P-00

151

P-00

150

P-00

149

P-00

148

P-00

147

P-00

157

Butto

n &

Sprin

g As

sem

blie

s O

nly

Part

#

Com

plet

e Pl

ug A

ssem

blie

s (In

clud

es A

ppro

pria

te B

utto

n &

Sprin

g As

sem

bly)

Part

#

C-0

0586

Spl

ine

End

B-00

105

Thum

b Sc

rew

w/ C

aptiv

e W

ashe

r

P-00

166

(1) E

nd C

ap S

uppl

ied

w/ A

ppro

pria

te F

aste

ner S

crew

s(2

) Com

plet

e En

d Pl

ug A

ssem

blie

s Su

pplie

d w

/ App

ropr

iate

Cro

wn

Lock

Fas

tene

rs

NO

TES:

UST

S-05

0 50

FT.

TEL

ESC

OPI

C S

TIC

K

USS

A-O

HP

Hot

Stic

k Pr

obe

To O

rder

a C

ompl

ete

Set o

f UST

S-05

0 B

utto

ns &

Spr

ings

Spe

cify

UST

S-05

0-B

UTT

ON

-KIT

(3) P

-001

57 &

P-0

0127

Incl

ude

Tip

Lock

Plu

g R

emov

al T

ool

Rep

lace

men

t Fib

ergl

ass

Sect

ions

(Fib

ergl

ass

Onl

y)

B-00

140

Spl

ine

End

Fast

ener

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

CO

MM

ON

REP

AIR

PAR

TS F

OR

USI

EXT

ERN

AL R

OD

SH

OTG

UN

STI

CK

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

67

81

2 35

4

109

13

12 11

No.

Indi

vidu

al P

art D

escr

iptio

nPa

rt N

o.1

Bras

s Bu

tton

C-0

0335

2Sh

otgu

n Bu

tton

Sprin

gB-

0049

53

10-3

2 Sh

ould

er B

olt

B-00

861

410

-32

Lock

Nut

B-00

860

5M

olde

d Bl

ue H

andl

eC

-003

256

Rel

ease

Lev

erC

-010

557

1/8"

x 3

/4" R

oll P

inB-

0051

68

Leve

r Spr

ing

B-00

013

9R

ack

Stop

C-0

0321

1010

-24

x 1/

4" U

nder

cut F

HM

SB-

0055

111

Han

ger A

ssem

bly

w/ A

ttach

men

t Cla

mp

USS

A-H

GR

12Sp

line

End

Asse

mbl

yU

SSA-

OSE

1 1/

4" R

ubbe

r End

Cap

USS

A-O

EC

Com

plet

e As

sem

bly

Indi

vidu

al P

arts

No.

Com

plet

e As

sem

bly

Des

crip

tion

Part

No.

AEx

tern

al R

od S

hotg

un S

tick

Ope

ratin

g R

od A

ssem

bly

P-00

169

BEx

tern

al R

od S

hotg

un S

tick

Han

dle

Asse

mbl

y

Part

No.

P-00

170

Part

No.

P-00

171

P-00

168

Part

No.

P-00

172

B1

23

45

67

8

A

USS

G-0

04-E

R**

USS

G-0

06-E

R**

USS

G-0

08-E

R**

USS

G-0

10-E

R**

(PER

TAIN

S TO

SH

OTG

UN

STI

CKS

WIT

H D

ESIG

NAT

ION

: USS

G-*

**-E

R**

)

Rev

2.2

: 5/4

/12

13Sh

otgu

n H

ook

Asse

mbl

yC

-003

20

14

14H

ange

r w/ A

ttach

men

t Cla

mp

USS

A-H

GR

Page 44: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

84 85

CO

MM

ON

REP

AIR

PAR

TS F

OR

USI

INTE

RN

AL R

OD

SH

OTG

UN

STI

CK

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

67

81

2 35

4

109

13

11

No.

Indi

vidu

al P

art D

escr

iptio

nPa

rt N

o.1

Bras

s Bu

tton

C-0

0335

2Sh

otgu

n Bu

tton

Sprin

gB-

0049

53

10-3

2 Sh

ould

er B

olt

B-00

861

410

-32

Lock

Nut

B-00

860

5M

olde

d Bl

ue H

andl

eC

-003

256

Rel

ease

Lev

erC

-010

557

1/8"

x 3

/4" R

oll P

inB-

0051

68

Leve

r Spr

ing

B-00

013

9R

ack

Stop

C-0

0321

1010

-24

x 1/

4" U

nder

cut F

HM

SB-

0055

111 12

Splin

e En

d As

sem

bly

USS

A-O

SE1

1/4"

Rub

ber E

nd C

apU

SSA-

OEC

Com

plet

e As

sem

bly

Indi

vidu

al P

arts

No.

Com

plet

e As

sem

bly

Des

crip

tion

Part

No.

AIR

Sho

tgun

Stic

k O

pera

ting

Rod

Ass

embl

yP-

0017

3B

Shot

gun

Han

dle

Asse

mbl

y

Part

No.

P-00

174

Part

No.

P-00

175

P-00

168

Part

No.

P-00

176

B1

23

45

67

8

A

USS

G-0

04-IR

**U

SSG

-006

-IR**

USS

G-0

08-IR

**U

SSG

-010

-IR**

(PER

TAIN

S TO

SH

OTG

UN

STI

CKS

WIT

H D

ESIG

NAT

ION

: USS

G-*

**-IR

**)

Rev

2.2

: 5/4

/12

12

13Sh

otgu

n H

ook

Asse

mbl

yC

-003

20

14

14H

ange

r w/ A

ttach

men

t Cla

mp

USS

A-H

GR

16

1517

155/

16"-1

8 Fu

lly T

hrea

ded

Stud

B-00

302

16In

tern

al O

pera

ting

Rod

Cou

plin

gC

-004

5517

Cle

ar In

tern

al R

od S

lot C

over

C-0

0456

CO

MM

ON

REP

AIR

PAR

TS F

OR

USI

BBH

INTE

RN

AL R

OD

SH

OTG

UN

STI

CK

All S

pare

Par

t Ord

ers

are

Subj

ect t

o a

$25.

00 M

inim

um O

rder

Fee

67

81

2 35

4

109

13

11

No.

Indi

vidu

al P

art D

escr

iptio

nPa

rt N

o.1

Bras

s Bu

tton

C-0

0335

2Sh

otgu

n Bu

tton

Sprin

gB-

0049

53

10-3

2 Sh

ould

er B

olt

B-00

861

410

-32

Lock

Nut

B-00

860

5M

olde

d Bl

ue H

andl

eC

-003

256

Rel

ease

Lev

erC

-010

557

1/8"

x 3

/4" R

oll P

inB-

0051

68

Leve

r Spr

ing

B-00

013

9R

ack

Stop

C-0

0321

1010

-24

x 1/

4" U

nder

cut F

HM

SB-

0055

111 12

Splin

e En

d As

sem

bly

USS

A-O

SER

ubbe

r End

Cap

USS

A-O

EC

Com

plet

e As

sem

bly

Indi

vidu

al P

arts

No.

Com

plet

e As

sem

bly

Des

crip

tion

Part

No.

ABB

H IR

Sho

tgun

Stic

k O

pera

ting

Rod

Ass

embl

yP-

0017

7B

Shot

gun

Han

dle

Asse

mbl

y

Part

No.

P-00

178

Part

No.

P-00

179

P-00

168

Part

No.

P-00

180

B1

23

45

67

8

A

USS

G-0

04-IR

**-B

BHU

SSG

-006

-IR**

-BBH

USS

G-0

08-IR

**-B

BHU

SSG

-010

-IR**

-BBH

(PER

TAIN

S TO

SH

OTG

UN

STI

CKS

WIT

H D

ESIG

NAT

ION

: USS

G-*

**-IR

**-B

BH)

Rev

2.2

: 5/4

/12

12

13Sh

otgu

n H

ook

Asse

mbl

yC

-003

20

14

14H

ange

r w/ A

ttach

men

t Cla

mp

USS

A-H

GR

16

1517

155/

16"-1

8 Fu

lly T

hrea

ded

Stud

B-00

302

16In

tern

al O

pera

ting

Rod

Cou

plin

gC

-004

5517

Cle

ar In

tern

al R

od S

lot C

over

C-0

0456

Page 45: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

87

Sales Representative Directory

Lineman driven. Field proven.

UTILITYSOLUTIONS

ALABAMAALL PRODUCT LINES

UTILITY-SPECIALISTS INC.3908 CYPRESS DRIVE

BIRMINGHAM, AL 35243(205) 967-4602

FAX: (205) 967-4673www.utility-specialists.com

ALASKA

ALL PRODUCT LINESHEES ENTERPRISES

#1 12TH STREET, SUITE #15ASTORIA, OR 97103

(503) 325-8778FAX: (503) 325-2467

www.heesenterprises.com

ARIZONAALL PRODUCT LINES

SOURCEWEST ELECTRICAL SALESPO BOX 13080

CHANDLER, AZ 85249(480) 699-9013

Fax: (480) 699-9014www.sourcewestsales.com

ARKANSASALL PRODUCT LINES

SOUTHERN UTILITY SALES AGENCYPO BOX 816

PASS CHRISTIAN, MS 39571-0816(228) 452-6235

FAX (888) 492-9322www.susallc.com

CALIFORNIA -NORTHALL PRODUCT LINES

ISBERG-NOTT COMPANY4725 FIRST STREET #265PLEASANTON, CA 94566

(925) 426-4718FAX: (925) 426-0323www.isberg-nott.com

CALIFORNIA – SOUTHALL PRODUCT LINES

M.A. HANSON & SON, LLC409 BEVERLY DRIVEREDLANDS, CA 92373

(909) 593-7109FAX: (909) 593-9311www.mahanson.com

CANADA – ALBERTAALL PRODUCT LINES

MARTIN ELECTRICAL SERVICES1319 – 54TH STREET

EDMONTON, AB T6L 2A7(780) 463-1626

FAX: (780) 485-1704

CANADA – BCALL PRODUCT LINESHALLWOOD MILHAM

TECHNOLOGIESUNIT 206-669 RIDLEY PLACE

DELTA, BC V3M 6Y9(604) 526-4288

FAX: (604) 526-1850www.hmti.ca

CANADA – MARITIME PROVINCESALL PRODUCT LINES

PEFCO ONTARIO1734 FINCH AVENUE

PICKERING, ON L1V 1K4(905) 427-9294

FAX: (905) 427-0540

CANADA – ONTARIOALL PRODUCT LINES

PEFCO ONTARIO1734 FINCH AVENUE

PICKERING, ON L1V 1K4(905) 427-9294

FAX: (905) 427-0540

CANADA – QUEBECALL PRODUCT LINES

LIMOTRIQUE175 RUE OLEG-STANEK

SHERBROOKE, QC J1L 2V4(819) 564-4410

FAX: (819) 564-2227www.limotrique.com

COLORADOALL PRODUCT LINES

VIKING UTILITY SALES, INC.894 N. CASTLEWOOD CANYON RD

FRANKTOWN, CO 80116(303) 660-6899

FAX: (303) 663-7366www.viking-sales.com

CONNECTICUTALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

DELAWAREALL PRODUCT LINES

J.B. Sales Company7957 INDUSTRIAL PARK ROAD

EASTON, MD 21601(410) 822-9611

FAX: (410) 822-8358www.jbsales.com

DISTRICT OF COLUMBIA ALL PRODUCT LINES J.B. SALES COMPANY

7957 INDUSTRIAL PARK ROADEASTON, MD 21601

(410) 822-9611FAX: (410) 822-8358

www.jbsales.com

Page 46: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

88 89

UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORYUNITED STATES

FLORIDAALL PRODUCT LINES

UTILITY-SPECIALISTS INC.3908 CYPRESS DRIVE

BIRMINGHAM, AL 35243(205) 967-4602

FAX: (205) 967-4673www.utility-specialists.com

GEORGIAALL PRODUCT LINES

UTILITY-SPECIALISTS INC.3908 CYPRESS DRIVE

BIRMINGHAM, AL 35243(205) 967-4602

FAX: (205) 967-4673www.utility-specialists.com

HAWAIIALL PRODUCT LINESHEES ENTERPRISES

#1 12TH STREET, SUITE #15ASTORIA, OR 97103

(503) 325-8778FAX: (503) 325-2467

www.heesenterprises.com

IDAHO -NORTHALL PRODUCT LINESHEES ENTERPRISES

#1 12TH STREET, SUITE #15ASTORIA, OR 97103

(503) 325-8778FAX: (503) 325-2467

www.heesenterprises.com

IDAHO -SOUTHALL PRODUCT LINES

CONELY ENGINEERING CO.2066 WEST 2300 SOUTH

SALT LAKE CITY, UT 84119(801) 972-5923

FAX: (801) 972-5952

ILLINOIS – NORTHALL PRODUCT LINES

MIDWEST ELECT. RESOURCESN109 ERIN ROAD

OCONOMOWOC, WI 53066(920) 474-3504

FAX: (630) 778-9822www.mwelecres.com

ILLINOIS – SOUTHALL PRODUCT LINES

POWER EQUIPMENT SALES1507 LAKE AVENUE

KANSAS CITY, KS 66103(913) 384-3848

FAX: (913) 384-5097 www.powerequipsales.com

MARYLANDALL PRODUCT LINESJ.B. SALES COMPANY

7957 INDUSTRIAL PARK ROAD EASTON, MD 21601

(410) 822-9611FAX: (410) 822-8358

www.jbsales.com

MASSACHUSETTSALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

MEXICOALL PRODUCT LINES

MAYECEN S.A. DE C.V.ANGEL GARCIA ABURTO NO. 364COL. BALDERRAMA, C.P. 83180

HERMOSILLO SONORA, MEXICO001 52 - (662) 260-2080 EXT. 113

FAX: 52- (662) 260-2035www.mayecen.com

MICHIGANALL PRODUCT LINES

GAR-NET ASSOCIATES, INC.4160 BRIARHILL DRIVE

MILAN, MI 48160(734) 434-8868

FAX: (734) 434-5663

MINNESOTAALL PRODUCT LINES

LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112

(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com

MISSISSIPPIALL PRODUCT LINES

SOUTHERN UTILITY SALES AGENCYPO BOX 816

PASS CHRISTIAN, MS 39571-0816(228) 452-6235

FAX (888) 492-9322www.susallc.com

MISSOURIALL PRODUCT LINES

POWER EQUIPMENT SALES1507 LAKE AVENUE

KANSAS CITY, KS 66103(913) 384-3848

FAX: (913) 384-5097www.powerequipsales.com

INDIANA - LESS NORTHERN CORNER

ALL PRODUCT LINESPOWERLINK ELECTRICAL SALES

30555 CLEMENS ROADWESTLAKE, OH 44145

(440) 899-0884FAX: (440) 899-1185

www.yourpowerlink.com

INDIANA - NORTHERN CORNERALL PRODUCT LINES

MIDWEST ELECT. RESOURCESN109 ERIN ROAD

OCONOMOWOC, WI 53066(920) 474-3500

FAX: (630) 778-9822www.mwelecres.com

IOWAALL PRODUCT LINES

THE MCCASKEY COMPANY5925 COUNCIL STREET, NE

SUITE 112CEDAR RAPIDS, IA 52402

(319) 743-3730FAX: (319) 743-3733

www.mccaskey-co.com

KANSAS ALL PRODUCT LINES

POWER EQUIPMENT SALES1507 LAKE AVENUE

KANSAS CITY, KS 66103(913) 384-3848

FAX: (913) 384-5097www.powerequipsales.com

KENTUCKYALL PRODUCT LINES

POWER SERVICE AGENCY2509 JOYA DRIVE

NASHVILLE, TN 37214(615) 885-6362

FAX: (615) 885-1261www.powerserviceagency.com

LOUISIANAALL PRODUCT LINES

SOUTHERN UTILITY SALES AGENCYPO BOX 816

PASS CHRISTIAN, MS 39571-0816(228) 452-6235

FAX (888) 492-9322www.susallc.com

MAINEALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORYUNITED STATES

MONTANA -EAST ALL PRODUCT LINES

LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112

(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com

MONTANA - WESTALL PRODUCT LINESHEES ENTERPRISES

#1 12TH STREET, SUITE #15ASTORIA, OR 97103

(503) 325-8778FAX: (503) 325-2467

www.heesenterprises.com

NEBRASKAALL PRODUCT LINES

THE MCCASKEY COMPANY5925 COUNCIL STREET, NE

SUITE #112CEDAR RAPIDS, IA 52402

(319) 743-3730FAX: (319) 743-3733

www.mccaskey-co.com

NEVADA -NORTH ALL PRODUCT LINES

ISBERG-NOTT COMPANY4725 FIRST STREET #265PLEASANTON, CA 94566

(925) 426-4718FAX: (925) 426-0323www.isberg-nott.com

NEVADA -SOUTH ALL PRODUCT LINES

SOURCEWEST ELECTRICAL SALES,PO BOX 13080

CHANDLER, AZ 85248(480) 699-9013

Fax: (480) 699-9014www.sourcewestsales.com

NEW HAMPSHIRE ALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

NEW JERSEYALL PRODUCTS LINES

G&M SALES, INC.1500 MCDANIEL DRIVE

WEST CHESTER, PA 19380(610) 738-1440

FAX: (610) 738-1441

NEW MEXICOALL PRODUCT LINES

VIKING UTILITY SALES, INC.894 N. CASTLEWOOD CANYON

ROADFRANKTOWN, CO 80116

(303) 660-6899FAX: (303) 663-7366www.viking-sales.com

NEW YORK – LESS NYCALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

NEW YORK – NYC AREAALL PRODUCT LINES

G&M SALES, INC.1500 MCDANIEL DRIVE

WEST CHESTER, PA 19380(610) 738-1440

FAX: (610) 738-1441

NORTH CAROLINAALL PRODUCT LINES

POWERTECH, LLC9004 YELLOW PINE COURT

Waxhaw, NC 28173Phone (704) 843-7271FAX (704)843-7283

www.powertechllc.com

NORTH DAKOTAALL PRODUCT LINES

LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112

(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com

OHIOALL PRODUCT LINES

POWERLINK ELECTRICAL SALES30555 CLEMENS ROADWESTLAKE, OH 44145

(440) 899-0884FAX: (440) 899-1185

www.yourpowerlink.com

OKLAHOMAALL PRODUCT LINES

JONES POWER PRODUCTS3415 HUNTERS RIDGE

BLANCHARD, OK 73010(405) 485-2019

FAX: (405) 485-3484www.jonespowerproducts.com

OREGONALL PRODUCT LINESHEES ENTERPRISES

#1 12TH STREET, SUITE #15ASTORIA, OR 97103

(503) 325-8778FAX: (503) 325-2467

www.heesenterprises.com

PENNSYLVANIAALL PRODUCTS LINES

G&M SALES, INC.1500 MCDANIEL DRIVE

WEST CHESTER, PA 19380(610) 738-1440

FAX: (610) 738-1441

PUERTO RICOALL PRODUCT LINES

J.L. FLORES, INC.P.O. BOX 9719

CAGUAS, PR 00726(787) 747-5906

FAX: (787) 747-4663www.jlflorespr.com

RHODE ISLANDALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

SOUTH CAROLINAALL PRODUCT LINES

POWERTECH, LLC9004 YELLOW PINE COURT

Waxhaw, NC 28173Phone (704) 843-7271FAX (704)843-7283

www.powertechllc.com

SOUTH DAKOTAALL PRODUCT LINES

LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112

(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com

TENNESSEE – EAST 2/3 ALL PRODUCT LINES

POWER SERVICE AGENCY2509 JOYA DRIVE

NASHVILLE, TN 37214(615) 885-6362

FAX: (615) 885-1261www.powerserviceagency.com

Page 47: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

90 91

UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORYUNITED STATES

TENNESSEE – WEST 1/3ALL PRODUCT LINES

SOUTHERN UTILITY SALES AGENCYPO BOX 816

PASS CHRISTIAN, MS 39571-0816(228) 452-6235

FAX (888) 492-9322

TEXASALL PRODUCT LINES

JONES POWER PRODUCTS4804 SNOWS HILL COURT

ARGYLE, TX 76226(405) 485-2019

FAX: (405) 485-3484www.jonespowerproducts.com

UTAH ALL PRODUCT LINES

CONELY ENGINEERING CO.2066 WEST 2300 SOUTH

SALT LAKE CITY, UT 84119(801) 972-5923

FAX: (801) 972-5952

VERMONTALL PRODUCT LINES

LVA SALES56 HARVESTER AVENUE

BATAVIA, NY 14020(585) 201-7040

FAX: (585) 219-5859www.lvasales.com

VIRGINIAALL PRODUCT LINESJ.B. SALES COMPANY

7957 INDUSTRIAL PARK ROADEASTON, MD 21601

(410) 822-9611FAX: (410) 822-8358

www.jbsales.com

WASHINGTONALL PRODUCT LINESHEES ENTERPRISES

#1 12TH STREET, SUITE #15ASTORIA, OR 97103

(503) 325-8778FAX: (503) 325-2467

www.heesenterprises.com

WEST VIRGINIAALL PRODUCT LINES

CALL FACTORY(828) 323-8914

WISCONSINALL PRODUCT LINES

MIDWEST ELECT. RESOURCESN109 ERIN ROAD

OCONOMOWOC, WI 53066(920) 474-3504

FAX: (630) 778-9822www.mwelecres.com

WYOMING – EASTALL PRODUCTS

THE MCCASKEY COMPANY5925 COUNCIL STREET, NE

SUITE 112CEDAR RAPIDS, IA 52402

(319) 743-3730FAX: (319) 743-3733

www.mccaskey-co.com

WYOMING -SOUTHALL PRODUCTS

VIKING UTILITY SALES, INC.894 N. CASTLEWOOD CANYON

ROADFRANKTOWN, CO 80116

(303) 660-6899FAX: (303) 663-7366www.viking-sales.com

Standard Terms and Conditions of Sale

Standard Terms and Conditions of SaleThese terms and conditions govern the sale of products (“Product or Products) and provisions of services (“Services”) by Utility Solutions Inc. (USI). These terms and conditions (“Agreement”) take precedence over Buyer’s supplemental or conflicting terms and conditions to which notice of objection is hereby given. Neither Seller’s commencement of performance or delivery shall be deemed or construed as acceptance of Buyer’s supplemental or conflicting terms and conditions. USI’s failure to object to conflicting or additional terms will not change or add to the terms of this agreement. Buyer’s acceptance of the Products and / or Services from Seller shall be deemed to constitute acceptance of the terms and conditions contained herein.

1. Orders: All orders placed by Buyer are subject to acceptance by Seller. Orders may not be cancelled or rescheduled without the Seller’s consent. All orders must identify the product, part number, quantity, unit price, freight forwarder, contact information, Bill and Ship To information as well as purchase order number, date and quotation reference if applicable. Seller may at its sole discretion allocate Product among its customers.

2. Prices: The prices of the Products are those specified through price list or quotation. Pricing is subject to change in the event of an increase in Seller’s cost, change in market conditions or any other causes beyond Seller’s control. Price quotations shall automatically expire in thirty (30) days from date of issue, or as otherwise stated in the quotation.

3. Taxes: Unless otherwise agreed to in writing by Seller, all prices quoted are exclusive of transportation and insurance costs, duties, and all taxes including federal, state and local sales, excise and value added, goods and services taxes, and any other taxes. Buyer agrees to indemnify and hold Seller harmless for any liability for tax in connection with the sale, as well as the collection or withholding thereof, including penalties and interest thereon.

4. Payment: Payment may be made by check, money order, credit card, or wire transfer (all fees are borne by the buyer). Where Seller has extended credit to the Buyer, terms of payment shall be net thirty (30) days from date of invoice. On any past due invoice, Seller may impose interest at the rate of 1.5% per month. If Buyer fails to make each payment when it is due, Seller reserves the right to change or withdraw credit and hereby suspend or cancel performance under any and all purchase order agreements in which Seller has extended credit to the Buyer. In the event of default by Buyer, Seller shall be entitled to costs, fees, and expenses, including but not limited to recover of attorney fees, court costs and fees, and collection costs.

5. Delivery and Title: All deliveries shall be made “EXWORKS” place of shipment, unless otherwise agreed upon. Title and risk of loss pass to the Buyer upon delivery of the Product to the carrier. Seller’s delivery dates are estimates only and Seller is not liable for delays in delivery or for failure to perform due to causes beyond the reasonable control of the Seller, nor shall carrier be deemed an agent of the Seller. A delayed delivery of any part of an order does not entitle Buyer to cancel other deliveries.

6. Acceptance / Returns: Shipments will be deemed to have been accepted by the Buyer upon delivery of the said shipments to the Buyer unless rejected upon receipt. Any discrepancy in shipment quantity must be reported within 7 days after delivery. Buyer may not return Products without a return for material authorization (RMA). RMA valid for 30 days from date issued. Any product returned by Buyer due to Buyer’s error may be subject to a restocking change equivalent to 100% of the value of such Product as specified in Sellers’s invoice to Buyer.

7. Limited Warranty: Seller warrants to Buyer that Products purchased hereunder will conform to the manufacture’s specifications for such products and is warranted from material defect for a period of one (1) year from the date of shipment. If Seller breaches this warranty, Buyer’s remedy is limited to (at Seller’s election) (1) refund of Buyer’s purchase price for such production (without interest), (2) repair of such Products, or (3) replacement of such Products; provided that such Products must be returned to Seller, along with acceptable evidence of purchase No warranty will apply if the Product as been subjected to misuse, neglect, accident or modification.

SAVE AS EXPRESSLY PROVIDED IN THESE TERMS AND CONDITIONS, ALL IMPLIED WARRANTIES, TERMS AND CONDITIONS (WHETHER STATUTORY OR OTHERWISE) ARE EXCLUDED TO THE FULLEST EXTENT PERMITTED BY LAW.

8. Limitation of Liabilities: BUYER SHALL NOT BE ENTITLED TO, AND SELLER SHALL NOT BE LIABLE FOR, LOSS OF PROFITS OR REVENUE, PROMOTIONAL OR MANUFACTURING EXPENSES, OVERHEADS, BUSINESS INTERUPPTION COSTS, INJURY TO REPUTATION OR LOSS OF BUYERS, PUNITIVE DAMAGES, LOSS OF CONTRACTS OR ORDERS OR ANY INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. BUYER’S RECOVERY FROM SELLER FOR ANY CLAIM SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE AFFECTED PRODUCTS IRRESPECTIVE OF THE NATURE OF THE CLAIM WHETHER IN CONTRACT, TORT, WARRANTY OR OTHERWISE. BUYER WILL INDEMNIFY, DEFEND AND HOLD SELLER HARMLESS FROM ANY CLAIMS BASED ON (a) SELLERS COMPLIANCE WITH BUYER’S DESIGNS, SPECIFICATIONS, OR INSTRUCTIONS, (b) MODIFICATION OF ANYH PRODUCTS BY ANYONE OTHER THAN SELLER, OR (c) USE IN COMBINATION WITH OTHER PRODUCTS.

Page 48: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

92 93

9. Export Control: Buyer certifies that it will be the recipient of the Products to be delivered by the Seller. Buyer acknowledges that the products are subject to the export/import control laws and regulations of various countries, including the Export Administration Laws of the United States. Products sold by the Seller cannot be transferred, sold or re- exported to any part on the Entity List or Restricted Persons List of the U.S. Department of Commerce Bureau of Industry and Security, any party designated by the U.S. Department of Treasury Department’s Office of Foreign Assets Control, and any party debarred or sanctioned for proliferation of terrorism reasons by the U.S. State Department.

10. Use of Products: Buyer agrees that Seller and manufacturer of the Products are not liable, in whole or in part, for any claim. Buyer agrees to indemnify, defend and hold seller and manufacturer of Products harmless from and against any and all claims, damages, losses, costs, expenses, and liabilities arising out of or in connection with use or sale.

11. Force Majeure: Seller is not liable for failure to fulfill its obligations for any accepted order or for delays in delivery due to causes beyond Seller’s reasonable control including, but not limited to, acts of God, natural or artificial disaster, riot, war, strike, delay by carrier, shortage of product, acts or omissions of other parties, acts or omissions of civil or military authority, Government priorities, changes in law, material shortages, fire, floods, epidemics, quarantine restrictions, acts of terrorism, delays is transportation or inability to obtain labor, materials or products through its regular sources, which shall be considered as an event of force majeure excusing Seller from performance and barring remedies for non- performance. In an event of force majeure condition, the Seller’s time for performance shall be extended for a period equal to the time lost as a consequence of the force majeure condition with subjecting Seller to any liability or penalty. Seller may, at its option, cancel the remaining performance, without liability or penalty, by giving notice of such cancellation to the Buyer.

12. Technical Assistance or Advice: Any technical assistance or advice offered to the Buyer is provided only as an accommodation to the Buyer. Seller shall not be held liable for the content or Buyer’s use of such technical assistance or advice nor shall any statement made by any of Seller’s representatives in connection with the Products or Services constitute a representation or warranty, express or implied.

13. General: (a) The laws of the state of North Carolina will exclusively govern any dispute between Seller and Buyer, (b) Buyer may not assign this Agreement without the prior written consent of the Seller. This agreement is binding on successor and assigns, (c) Products, including intellectual property, are subject to any applicable rights of third parties, such as patents, copyrights and/or user licenses.

T&C062413

Standard Terms and Conditions of Sale . . . continued

AAdapters 46Arc Shield 52Arm Guard Raptor Shield 21

BBags & Cases 45Bags for Fiberglass Sticks 45Blanket Buttons 63Blanket Clamp 63Blanket Holders 65Blanket Mate 65BLUE STRIPE® 34, 36, 38, 41, 42, 44

Boom Holster 43BREAK-SAFE® 8, 9, 10, 11Bucket Hook 68Bucket Mate 68Bucket Operable 35Bucket Stick Storage Case 45Bushing 57Bypass Tool 54

CCable Stripping 30Clamps 19, 63, 64Cleaning Brush 20Cleaning Supplies 48, 49Cloth 48Conductor Bar 12Conductor Cleaning 19, 20Conductor Cleaning Brush 20Conductor Cleaning Clamp 19Cutout 14, 15Cutout Bypass Tool 14Cutout Fuse Tube Remover 15

DDemonstration Trailers 59Disconnect Head 40, 42Double Prong Stick End 46Dual Conductor Bars 11Duckbill 9, 12

EElbow-Mule™ 28Elbows 28Electric Meter 52Electric Meter Jumper Leads 53, 54Expendable Fuse Tube Caps 26External Rod 36

FFemale Socket Adapter 37Ferrule End 53Fiberglass Hot Sticks 31, 36, 37, 38, 40, 42, 43, 44Fire Prevention 12Floating Head 9Foam Filled Extension 35

Foam Filled Straight Sticks 42Fuse-Safe™ 12Fuse Tube Caps 26Fuse Tubes 15, 26

GGeneral Purpose Cleaner 49GRAB-IT 15Grounding Assemblies 58Ground Operable 35Grounds Tester 58

HHoe Attachment 46Hot Stick Accessories 46Hot Stick Holder 43Hot Sticks 34Hot Stick Wax 49Hot Stick Wiping Cloth 48

IInsulated Rubber Blankets 62Internal Rod 36

JJack Jumper™ 14Jumper-Aid™ 17, 67Jumper Clamp 16, 66Jumper Hook 16, 66Jumper Leads 53, 54Jumper-T 18Jumper Wire 17, 67

KKlondike Clamp 64

LLoad Break Tools 5Load Pick-Up Tool 10LOAD-RANGER® 6, 7Load-Trainer™ 56, 57Low Voltage Bypass Tool 54

MMagnet 65Measuring Sticks 41Meter Grabber 52Metering Products 51Molded Bucket Hooks 68

NNEMA Switch-Head 38, 42

OOverhead Cutout 24, 25, 26Overhead Distribution 13Overhead Fuse Cutouts 23, 24

Index

Page 49: Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... ·  · 2015-05-26Field proven. UTILITY ... • We have a design and manufacturing philosophy

94

PPad Gear 29Pad Mount 28, 29Pad Mount Multi-Tool 29Penta-Head Bolts 29Phase Rotation Meter 57Pick-Up Tool 8Plastisol Hanger & Clamp 46Polymeric Cutouts 24Polymeric Ice Removal Spline Attachment 46Polymeric Removal Hook Spline Attachment 46Porcelain Cutouts 24Portable Switch 10, 54

RRaptor Nesting Problems 21Raptor Shield 21Reach Technology 58Replacement Brush Set 19, 20Rescue Hook 44Rotary Blade Spline Attachment 46Rotary Prong Spline Attachment 46Rubber Blankets 62Rubber End Cap 46Rubber Goods 61

SSafety Gear 44Safety & Training 55Sales Representative Directory 87Sectional Disconnect Sticks 38Sectional Sticks 38, 39, 40Severe Weather Stick 44Shoestring Cutter 46Shotgun Sticks 36, 37Silicone Wipes 48Simulation 56Snap On Adapters 39, 40Socket 29Spline End 36, 40, 42Storage Bags 40Storm Stick 41, 44Straight Sticks 42Strip-N-Coil™ 30Substation Insulators And Bushings 22

TTele-Pole 34Telescopic Sticks 34, 35Tool Demonstration Trailers 59Torque Bar Spline Attachment 46Trailer 59Training 56Transformer 22

UUnderground Cables 30Underground Distribution 27Universal Hotstick Probe 46UniversalSpline 34, 36, 37, 38, 39, 40, 41, 42, 46URD Wrench 29USAG 21USBA 63USBC 43, 45USBM 65, 68USBS 8, 9, 10, 11USCC 19, 20USCO 24, 25, 26USCP 64USCS 30USDS 39, 40USEP 28USFS 12USGT 58USJH 16, 17, 66, 67USJJ 14USJL 53, 54USJT 18USLR 6, 7USMG 52USMT 29USRB 62USRH 44USSA 46USSB 45USSG 36, 37USSS 41, 42USTS 34, 35, 41USUW 29USVS 22

VVarmint Shield 22Visible Gap 18

WWax & Cleaner 49Wipes 48Wrench 29

XXFMR 56, 57XLT 6, 7