fibre cement profiled sheets - briarwood products ltd...fibre cement profiled sheets are an ideal...

www.briarwoodproducts.co.uk

Fibre Cement Profiled Sheets

Fibre cement profiled sheets are an ideal cladding for Agricultural, Industrial, Commercial and Domestic buildings

EUROSIX Fibre cement profiled sheets have many advantages over alternative roof coverings which will benefit the life expectancy and efficient use of your building, Benefits include vapour permeability (natural ability for sheets to ‘breath’) thus significantly reducing the possibility of condensation, excellent acoustic insulation which reduces noise within the building, completely weatherproof roof covering and maintenance free after fixing.

EUROSIX fibre cement profiled sheets are maintenance free, will not suffer from rust, rot or corrosion and are expected to last well in excess of 30 years minimum. EUROSIX sheeting is often fixed to roofs where the building may contain a very aggressive atmosphere (chemicals, dampness, heat etc) and because of all the natural benefits enjoyed by EUROSIX they will exceed expectations and life expectancy of most alternative products available on the market today, and has done for 100 years.

The full range of EUROSIX fibre cement sheeting is reinforced with strategically placed polypropylene strips which are fully integrated along each corrugation of every sheet.Natural Grey is the standard finish of the EUROSIX fibre cement sheet and fittings but a range of colours are available from Briarwoods stock in either a Matt surface finish (colour wash) which reduces sun glare and reflection from the roof or a further range of BS standard colours with a top surface ‘baked’ on paint system and specified often by local authorities when matching in to surrounding buildings or landscapes.

Briarwood hold the largest range of Natural Grey, Meadowscape and standard Painted colours in both sheets and fittings along with Spaced sheets and Ventilation systems with no restriction on any sheets sizes or range of fittings if required outside the natural grey colour range.

EUROSIX is manufactured under QS ISO 9002 and fully covered by CE Certification and BBA approved.

Please turn over to view the complete EUROSIX range of fibre cement sheets accessories

8 9


Fibre Cement Profiled Sheets

Reinforced Sheeting

Reinforced Spaced SheetingEfficient ventilation is important in any livestock building as it supports animal welfare by reducing moisture levels which can carry bacteria and disease.

EUROSIX Sheet Lengths & Weights

Metric Imperial Dry Weight (KG)1525 5’ 24.801675 5’6 27.291830 6’ 29.812000 6’6 32.582130 7’ 34.702290 7’6 37.312440 8’ 39.752600 8’6 42.352740 9’ 44.642900 9’6 47.273050 10’ 49.70

EUROSIX Spaced Sheet Lengths & Weights

Metric Imperial Dry Weight (KG)1525 5’ 22.801675 5’6 25.051830 6’ 27.452000 6’6 30.002130 7’ 31.952290 7’6 36.602440 8’ 37.312600 8’6 39.002740 9’ 41.402900 9’6 43.503050 10’ 45.75

Net Cover 1016mm

Nominal Pitch

146.5mm

Nominal Width 1086mm

Overall Depth

54mm

Thickness 6.8mm


Metric Imperial

1525 5’ 1675 5’61830 6’ 2000 6’62130 7’ 2290 7’62440 8’ 2600 8’62740 9’ 2900 9’63050 10’

Length Weight KG

1525 24.801675 27.291830 29.812000 32.582130 34.702290 37.312440 39.752600 42.352740 44.632900 47.243050 49.70

This illustration shows the location of the strategically

placed polypropylene reinforcing strips which are

inserted into each corrugation of our EUROSIX Fibre

Cement Sheeting.

Reinforced Sheeting

Briarwood Catalogue 2014 Page 5

page 5-6 profile data.indd 8 19/03/2014 17:33:50

Net Cover 1016mm

Nominal Pitch

146.5mm


Overall Depth

54mm

Thickness 6.8mm


Metric Imperial

1525 5’ 1675 5’61830 6’ 2000 6’62130 7’ 2290 7’62440 8’ 2600 8’62740 9’ 2900 9’63050 10’

Length Weight KG

1525 24.801675 27.291830 29.812000 32.582130 34.702290 37.312440 39.752600 42.352740 44.632900 47.243050 49.70

This illustration shows the location of the strategically

placed polypropylene reinforcing strips which are

inserted into each corrugation of our EUROSIX Fibre

Cement Sheeting.

Reinforced Sheeting



Nominal Pitch

146.5mm

Sheet Width 1000mm

Thickness 6.8mm

Reinforced Spaced Sheeting(Provides efficient natural ventilation)

Metric Imperial

1525 5’ 1675 5’61830 6’ 2000 6’62130 7’ 2290 7’62440 8’ 2600 8’62740 9’ 2900 9’63050 10’


Length Weight KG

1525 22.801675 25.051830 27.452000 30.002130 31.952290 36.602440 37.312600 39.002740 41.402900 43.503050 45.75



Nominal Pitch

146.5mm

Sheet Width 1000mm

Thickness 6.8mm


Metric Imperial

1525 5’ 1675 5’61830 6’ 2000 6’62130 7’ 2290 7’62440 8’ 2600 8’62740 9’ 2900 9’63050 10’


Length Weight KG

1525 22.801675 25.051830 27.452000 30.002130 31.952290 36.602440 37.312600 39.002740 41.402900 43.503050 45.75



Nominal Pitch

146.5mm

Sheet Width 1000mm

Thickness 6.8mm


Metric Imperial

1525 5’ 1675 5’61830 6’ 2000 6’62130 7’ 2290 7’62440 8’ 2600 8’62740 9’ 2900 9’63050 10’


Length Weight KG

1525 22.801675 25.051830 27.452000 30.002130 31.952290 36.602440 37.312600 39.002740 41.402900 43.503050 45.75



Net Cover 1016mm

Nominal Pitch

146.5mm


Overall Depth

54mm

Thickness 6.8mm

Nominal Pitch

146.5mm

Sheet Width 1000mm

Thickness 6.8mm

10 11


Close Fitting Ridge

Ventilated Ridge 900mm Girth

150mm MAX

Clear Opening175mm

200mm

Fixing Point

Timber Or Steel Purlin

150mm MAX

Clear Opening

Fixing Point


200mm

175mm


page 7 cf and vent.indd 10 21/03/2014 08:52:18

Available in 750mm Girth

To suit roof pitches: 12.5 & 15 Degrees only


To suit roof pitches: 5, 7.5, 10, 12.5, 15, 17.5, 20, 22.5 Degrees

Available in 1800mm* Girth

To suit roof pitches: 10, 12.5, 15, 17.5, 22.5 Degrees

* 1800mm Fragile – Further reinforcement is required under the ridge to conform to HSG33


To suit roof pitches 12.5 & 15 Degrees only


To suit pitches: 5, 7.5, 10, 12.5, 15, 17.5, 20, 22.5 Degrees

Available in 1800mm* Girth

To suit pitches: 10, 12.5, 15, 17.5, 22.5 Degrees

* 1800mm Fragile – Further reinforcement is required under the ridge to conform to HSG33 Vent opening dimension 100mm (height) x 732.5mm (maximum width)

These ridge fittings meet the requirements of HSG-33 Health and Safety Roof Work Manual.

Please note any ridges fitted to the old conventional method DO NOT meet the requirements of HSG-33.



Ventilation Ridge

Ventilated Ridge 900mm Girth

150mm MAX

Clear Opening175mm

200mm

Fixing Point


150mm MAX

Clear Opening

Fixing Point


200mm

175mm


page 7 cf and vent.indd 10 21/03/2014 08:52:18

Girth750mm, 900mm or 1800mm

Pitch Angle 305mmRadius

Girth750mm, 900mm or 1800mm

Pitch Angle 305mmRadius

12 13


Two Piece Adjustable Ridges Close Fitting

Two Piece Adjustable Ridges Ventilated

150mm MAX

100mmFixing Point

Clear Opening


MAX

Clear Opening

Fixing Point


100mm


page 8 cf adj.indd 11 19/03/2014 17:35:04

400mm - 600mm

250mm Approx

Fixing Point 300mm MAX

Timber or Steel Purlins

Fixing Point

100mm

150mm MAX

Clear Opening


Page 9

page 9 pw opr deiagram.indd 12 20/03/2014 15:56:34

150mm MAX

100mmFixing Point

Clear Opening


MAX

Clear Opening

Fixing Point


100mm


page 8 cf adj.indd 11 19/03/2014 17:35:04


Please note any ridges fitted to the old conventional method DO NOT meet the requirements of HSG-33



One piece Disc Finials, Diamond Finials or two piece Hooded Finials are a good option used to close the

gable end detail of any EUROSIX two piece ridge fittings.

Two Piece Adjustable Ridges Plain Wing

Disc Diamond Hooded

Finials

14 15

400mm - 600mm

250mm Approx



Fixing Point

100mm

150mm MAX

Clear Opening


Page 9


400mm - 600mm

250mm Approx



Fixing Point

100mm

150mm MAX

Clear Opening


Page 9



Cranked Barge Boards Barge Boards

Plain Wing Cranked Barge Board

For use when a one piece ridge is fitted (finials are required when 2 piece ridges are fixed)Available in 200x200mm wing at 1300mm & 2200mm GirthAvailable in 300x300mm wing at 1300mm Girth OnlyTo Suit Roof Pitches:5, 7.5, 10, 12.5, 15, 17.5, 22.5 Degrees

Roll Top Cranked Barge Board

For use when a one piece ridge is fitted (finials are required when 2 piece ridges are fixed)Available in 200x200mm wing at 1300mm & 2200mm GirthTo Suit Roof Pitches:5, 7.5, 10, 12.5, 15, 17.5, 22.5 Degrees

Plain Wing Barge Board

Used to close the verge at gable ends and also vertical claddingAvailable in 200x200mm or 300x300mm WingLength: 1830mm, 2440mm or 3050mm

Roll Top Barge Board

Used to close the verge at gable endsAvailable in 200x200mm WingLength: 1830mm, 2440mm or 3050mmSocket detail provides cover on overlap

Vergeline Barge Board

Used to close the verge atgable endsLength: 1830mm, 2440mm or 3050mmMin Lap: 150mmSocket detail provides cover on overlapThis fitment is handed, please state hand when ordering. This image shows right hand piece.

Girth 1300mm or 2200mm

359mmRadius

359mmRadius

359mmRadius

Girth 1300mm

Pitch Angle

Pitch Angle

Pitch Angle


200mm Or

300mm

200mm

305mm

Page 11

page 11 crk bb.indd 14 21/03/2014 08:54:06

200mm Or

300mm

200mm Or

300mm

200mm

200m

m

305mm

305mm

150mm

30mm

Page 10

20/03/2014 15:59:43

Vergeline Cranked Barge Board

For use when a one piece ridge is fitted (finials are required when 2 piece ridges are fixed)Available in 1300mm Girth OnlyTo Suit Roof Pitches:10, 12.5, 15, 17.5 22.5 Degrees


359mmRadius

359mmRadius

359mmRadius

Girth 1300mm

Pitch Angle

Pitch Angle

Pitch Angle


200mm Or

300mm

200mm

305mm

Page 11

page 11 crk bb.indd 14 21/03/2014 08:54:06

16 17


Apron-Eaves Accessories Movement Joints

Apron Flashing

Used at the junction detail where vertical and standard pitched roofs meet

Net Cover: 1016mm

Eave Filler

Closes corrugation at eaves of single skin cladding

Net Cover: 1016mm

Eave Closure

Closes corrugation at eaves of single skin and insulated cladding system

Net Cover: 1016mm

190m

m

54

260mm 140mm

265mm

150mm

mm051

Page 13

75mm54mm

20/03/2014 08:19:08

Movement Joint

Used to allow a movement\expansion break in larger buildings. Where a movement joint is required, the full EUROSIX sheet beneath it should be cut along the centre of its valley with a space of 25mm to 30mm.

Recommended spacing for Movement Joints are:-• Buildings with a length of 45 metres or less do not need a

Movement Joint.• Buildings with a length of 45 metres – 75 metres require one run of Movement Joints.• Another Movement Joint will be required every additional

30 metres.• Movement Joints require a minimum end lap of 150mm.• Movement Joints are fixed directly into purlins (not

through sheets)• Fixings should go through the centre point of the

Movement Joints at each Purlin position.

Cranked Movement Joint

Fixed on the ridge detail to overlap the top end detail of a straight Movement Joint. Fixings specification is the same as straight movement joints.

Movement Joint 2 piece Ridge

This is a flexible 2 piece movement joint ridge section which adjusts to fit at the crown of a duo-pitch roof.

Movement Joint Stop End

Used to close the open end of a straight Movement Joint at the eaves.

18 19


Open Protected Ridge

ApplicationApplication 1Application

1

23

4

1

Reinforced Sheets & GRP Rooflights

2

Close Fitting, Ventilated & Two Piece Ridges

Disc, Diamond, & Hooded Finials

3

4Plain Wing, Roll Top& Vergeline Barge Boards

6

5

5Cranked Plain Wing, Roll Top & Vergeline Barge Boards

6Apron Flashing, Eave Closure & Eave Fillers


page 14 3d building.indd 17 21/03/2014 10:28:01

Application

1

23

4

1


2



3


6

5





Application

1

23

4

1


2



3


6

5





Application

1

23

4

1


2



3


6

5





1 Ridges:Close Fitting, Ventilated & Two Piece

2 Sheets:Reinforced & GRP Rooflights

3 Finials:Disc, Diamond & Hooded

4 Barge Boards:Plain Wing, Roll Top & Vergeline

5 Cranked Plain Barge Boards:Wing, Roll Top & Vergeline

6 Aprons & Eaves:Flashing, Closures & Fillers

1

5

32

6

4400mm - 600mm

250mm Approx



Fixing Point

100mm

150mm MAX

Clear Opening


Page 9



Please note any ridges fitted to the old conventional method DO NOT meet the requirements of HSG-33

Intermediate purlins positioned along the fixing line can be used with the Open Ridge system to secure

the fixing through sheeting.

Efficient ventilation is important in any livestock building as it supports animal welfare by reducing

moisture levels which can carry bacteria and disease.

20 21

fibre cement profiled sheets - briarwood products ltd...fibre cement profiled sheets are an ideal...

Documents