faq : how to configure static ip connection wan fail over...
TRANSCRIPT
-1-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Technical Support Setup Procedure
FAQ : How to Configure Static IP Connection WAN Fail Over
to 3G on DWR-112
Release date : 5/01/2012
Model Support : DWR-112
H/W:A1
S/W:1.00
-2-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Technical Support Setup Procedure
การตงคาเพอเชอมตอแบบ Static IP พรอมกบท า Fail Over ไปทการเชอมตอ แบบ 3G บน DWR-112 ท าไดอยางไร
ขนตอนท 1 : เลอนสวทซทอยดานขางของ DWR-112 เราเตอรไปยง WI-FI โหมด
-3-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
ขนตอนท 2 : เชอมคอมพวเตอรไปยงพอรต 2 , 3 หรอ 4 ของ DWR-112 เชอมไปยง Cable/ADSL โมเดมไปยงพอรตท 1 ของ DWR-112 เสยบอะแดปเตอรเพาเวอรไปทชองเสยบเพาเวอรของ DWR-112 และอกดานหนงเสยบไปยงปลกไฟ
ขนตอนท 3 : เสยบ 3G USB Dongle บนพอรต USB ของ DWR-112
-4-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
ขนตอนท 4 : เปดเวบบราวเซอร เชน Internet Explorer, Mozilla Firefox หรอ Safari บนชอง address ใหพมพ หมายเลขไอพแอดเดรสของกลอง ดงตวอยาง http://192.168.0.1 หลงจากนนกด Enter บนคยบอรดของคณ
ขนตอนท 5 :เมอหนาจอส าหรบลอกอนปรากฏขน กรณาใสคาบญชผใชงาน (username) ดวย “admin” และรหสผานเปน “password” โดยอกษรทงหมดเปตวพมพเลก หลงจากนนใหคลกทปม Login
ขนตอนท 6 : คลกบนแทบของ SETUP แลวเลอกปม INTERNET ทอยทางดานซายมอ
-5-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
ขนตอนท 7 : ภายใตสวนของตวเลอก MANUAL INTERNET CONNECTION OPTION คลกบนปม MANUAL INTERNET CONNECTION SETUP
ขนตอนท 8 : ภายใตสวนของ INTERNET CONNECTION TYPE บนตวเลอกในเมนส าหรบ My Internet Connection ใหเลอกบน Static IP พรอมกบเลอก Enable WAN Failover.
ขนตอนท 9 : ภายใตสวนของ STATIC IP ADDRESS INTERNET CONNECTION TYPE ใสคา IP Addresses ทไดมาจากผใหบรการอนเตอรเนต (ISP) ของคณ
-6-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
ขนตอนท 10 : ภายใตสวนของ 3G INTERNET CONNECTION ตงคาตาง ๆ ตามดานลาง 1. ไมใหเลอกบน Auto Config
2. Country : เลอกต าแหนงทอยอาศยของคณในปจจบน
3. ISP : เลอกผใหบรการอนเตอรเนตของคณ
4. Dial Number : ใสคาเบอรทใช Dial (Dial Number) โดยจะถกก าหนดโดยผใหบรการอนเตอรเนต (ISP) ของคณ
5. APN : ใสคา APN โดยจะถกก าหนดโดยผใหบรการอนเตอรเนต (ISP) ของคณ 6. Authentication Protocol : เลอกจากตวเลอกทตองการในการตรวจสอบสทธ
(Authentication) 7. คลกบนปม Apply เพอใหการตงคานมผลในการท างาน
-7-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
ขนตอนท 11 : คลกบนปม Save Settings
-8-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Technical Support Setup Procedure
How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Step 1: Slide the toggle switch to Wi-Fi beside the DWR-112 router.
Step 2: Connect the computer to either port 2, 3 or 4 of the DWR-112, Connect the Cable/ADSL modem to port 1 of the DWR-112. Plug-in the power adapter to the power receptacle of the DWR-112 and to the power outlet.
-9-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Step 3: Plug in the 3G USB Dongle on the USB port of the DWR-112.
Step 4: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DWR-112 which is 192.168.0.1 and then press on the Enter key on your keyboard.
Step 5: A login screen will appear, type in the User Name as “admin” and leave the password field blank and then click on the Login button.
-10-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Step 6: Click on the SETUP tab and then select on INTERNET button on the left hand side.
Step 7: Under the MANUAL INTERNET CONNECTION OPTION section, click on the button,
Manual Internet Connection Setup.
Step 8: Under the INTERNET CONNECTION TYPE section, On the drop down menu for My Internet Connection is, select on Static IP. Put a check mark on Enable WAN Failover.
-11-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Step 9: Under the PPPoE INTERNET CONNECTION TYPE section, enter the sets of IP Addresses provided by your Internet Service Provider (ISP).
Step 10: Under the 3G INTERNET CONNECTION section, configure the following;
1. Uncheck on Auto Config 2. Country: Select your current location 3. ISP: Select who provides your Internet connection 4. Dial Number: Enter the Dial Number provided by your Internet Service Provider (ISP) 5. APN: Enter the APN provided by your Internet Service Provider (ISP) 6. Authentication Protocol: Select the on the drop down menu the required authentication
7. Click on the Apply button for the settings to take effect
-12-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Step 11: Click on the Save Settings button.
ฝายสนบสนนทางดานเทคนค
-13-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Call Center หมายเลขโทรศพท 02-6617997 ภาษาไทย : จนทร ถง ศกร เวลา 9.00 น. – 18.00 น. Thai : Mon – Fri : Time 9.00 – 18.00. ภาษาองกฤษ : เสาร , อาทตย , วนหยดนขตฤกษ และ วนธรรมดา หลง 18.00 น. English : Sat – Sun , Public Holiday and after 18.00 weekday. Website : www.dlink.co.th
email: [email protected] Facebook : http://www.facebook.com/DLinkThailandFans
Nationwide D-Link Service Centres :
-14-
FAQ : How to Configure Static IP Connection WAN Fail Over to 3G on DWR-112
Nationwide D-Link Service Centres :