Exterior 400 Image Projector™

2 3

Visual impact

The Exterior 400 Image Projector is the only fully-weatherproofed LED image projector with over 7000 lumens of power that can effectively integrate dynamic logos, textures and other graphics into outdoor lighting designs for greater visual impact.

• Bright and energy-efficient LED projection • Up to six interchangeable designs (gobos)• Up to eight interchangeable colors • Narrow, medium and wide beam angle options • Rugged, compact IP65 housing • Programmable effects: color scrolling, focus, image rotation, iris

FEATURES

4 5

Logos, textures and graphics Customizable colors

Housing up to six easy-to-replace designs (gobos), the Exterior 400 Image Projector is ideal for commercial logo projection or textured projections in architectural environ-ments. Gobos are fully customizable for the ultimate in design freedom.

Up to eight interchangeable colors allows for complete color customization. High-quality dichroic color filters enable rich and long-lasting color projections.

InTERChAngEAbLE DESIgnS InTERChAngEAbLE CoLoRS

A list of gobos available from Martin and suggested gobo manufacturers can be viewed at www.martin.com.

A wide variety of color options is available and can be viewed at www.martin.com. For special color requests, contact your local Martin dealer.

6 7

Dynamic effects Advanced LED technology

1 section = 1700 cd

42˚m ft.

2 6

5 16

10 32

15 49

20 62

E [lux]

8500

1360

340

151

85

E [fc]

790

125

31

14

8

30°

60°

30°

60°

42° beam angle

EXTERIOR 400 IP

Efficacy: 17.1 lumens per watt

Cutoff peak diameter: 0.77 x distance (m)

Illuminance: 34000 / distance² (lux)

Total output: 7500 (lumens)

1 section = 5300 cd

25˚m ft.

2 6

5 16

10 32

15 49

20 62

E [lux]

26500

4240

1060

471

265

E [fc]

2462

394

98

43

24

30°

60°

30°

60°

25° beam angle

EXTERIOR 400 IP

Efficacy: 16 lumens per watt

Cutoff peak diameter: 0.44 x distance (m)

Illuminance: 106000 / distance² (lux)

Total output: 7100 (lumens)

1 section = 11000 cd

16˚m ft.

2 6

5 16

10 32

15 49

20 62

E [lux]

55000

8800

2200

978

550

E [fc]

510

817

204

88

49

30°

60°

30°

60°

16° beam angle

EXTERIOR 400 IP

Efficacy: 15.9 lumens per watt

Half-peak diameter: 0.28 x distance (m)

Illuminance: 220000 / distance² (lux)

Total output: 7000 (lumens) For c

ompl

ete

phot

omet

ric d

ata

on th

e Ex

terio

r 400

IP, p

leas

e vi

sit w

ww

.mar

tin.c

om

Advanced LED engine

Color

Gobo

Lens array

A RAngE oF PRogRAmmAbLE EFFECTS CAn bE EmPLoyED To ADD An ExTRA ELEmEnT oF EyE-CATChIng AnImATIon.

Color scrolling and split colors Colors can be programmed to shift smoothly from shade to shade. Split color projection is also possible.

Focus Project a sharply-focused image or softer defocused effect, or dynamically shift between the two.

Image rotation Produce eye-catching movement through continuous rotation or fine adjust the image angle and positioning.

Iris Incorporate dynamic iris effects or adjust the iris for a more accurate projection.

ThE ExTERIoR 400 ImAgE PRojECToR IS ALSo FULLy DImmAbLE To RESPonD To nATURAL AnD AmbIEnT LIghT LEVELS.

The Exterior 400 Image Projector houses Martin’s highly advanced, patent-pending LED engine that surpasses what has previously been possible in terms of brightness, efficiency and compactness in an LED-based image pro-jector. Other benefits include greater reliability, less main-tenance and low energy consumption for a lower cost of ownership.

Narrow, medium and wide beam angle options allow for more accurate projections with less light spill.

ChoICE oF bEAm AngLES

©2012 martin Professional A/S Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

martin Professional A/S Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com

Founded in 1987 and headquartered in Aarhus, Denmark, Martin lighting solutions are industry standard on tours and events, theatres, nightclubs, and major television studios around the world, as well as indoor and outdoor architecture and commercial applications. We maintain a presence in the USA, UK, Germany, Denmark, France, Italy and Singapore with associated companies in Japan, the Middle East, Hong Kong and Argentina. Martin operates the industry’s most complete and capable distributor network with local partners in nearly 100 countries. Martin’s parent company, Schouw & Co, is an industrial conglomerate with 2010 revenue of approximately 1.8 billion USD. For more information please visit www.martin.com

PhysicalMedium- and wide-angle modelsLength: 365 mm (14.4 in.) including cable glandWidth: 307 mm (12.1 in.) including mounting yokeHeight: 421 mm (16.6 in.) including mounting yokeWeight: 14 kg (30.9 lbs.)Narrow-angle modelsLength: 425 mm (16.7 in.) including cable glandWidth: 307 mm (12.1 in.) including mounting yoke - 421 mm (16.6 in.) including mounting yokeWeight: 15 kg (33.1 lbs.)

Dynamic EffectsColor wheel: 8 interchangeable dichroic filters + open, full and split colors, continuous rotation, random colorRotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shakeMotorized iris: 0 - 100%, pulse effectsMotorized focus: Approx. 2 m (6.6 ft.) to infinityElectronic dimming: 0 - 100% continuous dimmingElectronic ‘shutter’ effect: Strobe, pulse and sinewave intensity modulation effectsPre-programmed effects: Varied macro effects available in stand-alone mode

opticsLight source: 7 x Luminus CBT-90 (50 W) LEDsWhite LED: 6500 KMinimum LED lifetime: 60 000 hours (to >70% luminous output)**Manufacturer´s figure obtained under manufacturer´s test conditions

Control and ProgrammingControl options: DMX, stand-alone, synchronized (master/slave)RDM (Remote Device Management): ImplementedDMX channels: 9DMX address setting: PC with Martin MUM™ software and DABS 1™ interface box, RDMStand-alone trigger options: Internal timer, including 24-hour clockStand-alone (single fixture and/or synchronized) programming: PC with Martin MUM™ software and DABS1™ hardware interfaceStand-alone program capacity: Up to 100 scenesDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Receiver: RS-485Firmware update: Serial upload via DMX link

Photometric DataLuminous flux: 7400 lm (with 25° lens)Cutoff angles: Narrow models 16°, Medium models 25°, Wide models 42°

ConstructionColor: Clear anodized, white, custom colors to special orderHousing: Anodized aluminumMounting bracket: 8 mm (0.3 in.) anodized aluminumFront glass: 6 mm (0.2 in.) anti-reflection coatedProtection rating: IP65

InstallationOrientation: Any Vertical aiming: 330°Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)

ConnectionsPower connection: 1.8 m (5.9 ft.) cable tailPower cable entry: IP68 cable glandData connection: 1.8 m (5.9 ft.) combined input + output cable tailData cable entry: IP68 cable gland

ElectricalAC power: 100-240 V nominal, 50/60 HzTypical power consumption, all effects static, zero light output: 13 WPower supply unit: Integrated, auto-sensing multi-voltage

Typical Power and Current100 V, 50 Hz: 422 W, 4.2 A, PF 0.995100 V, 60 Hz: 418 W, 4.2 A, PF 0.995110 V, 60 Hz: 417 W, 3.8 A, PF 0.994120 V, 60 Hz: 415 W, 3.5 A, PF 0.992208 V, 60 Hz: 409 W, 2.1 A, PF 0.957230 V, 50 Hz: 409 W, 1.9 A, PF 0.960240 V, 50 Hz: 408 W, 1.8 A, PF 0.954Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

ThermalCooling: ConvectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-22° F)*Maximum surface temperature, steady state, Ta=40° C (104° F): 75° C (167° F)Total heat dissipation (calculated, +/- 10%): 1440 BTU/hr.*AC mains power must remain applied if the ambient temperature falls below 0° C (32° F)

ApprovalsEU safety: EN 60598-1, EN 60598-2-17EU EMC: EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3US safety (US model): UL 1573, UL 1598US EMC (US model): FCC Part 15 Class ACanadian safety (US model): CSA C22.2 No. 166, CSA C22.2 No. 250.0

Included ItemsPower and data cable tails (pre-installed)Adjustable mounting yokeWashers for use with mounting fastenersUser manual

AccessoriesSafety eyebolt: P/N 91611239Safety wire, safe working load 50 kg (110.2 lbs.): P/N 916040033-pin male XLR connector, cable-type, IP65: P/N 916113063-pin female XLR connector, cable-type, IP65: P/N 91611307Wide range of filters and gobos available from Martin

Related ItemsMartin MUM™ (Multi Utility Manager) incl. DABS1™ interface & cables: P/N 90758090Martin RDM 5.5 Splitter™ : P/N 90758150Martin M-PC™ Pro (up to 64 DMX universes) incl. Martin USB Duo™ : P/N 90732070Martin M-PC™ Basic (up to 8 DMX universes) incl. Martin USB Duo™ : P/N 90732010Martin USB Duo™ USB/DMX interface box: P/N 90703010

ordering InformationExterior 400 IP™ Narrow, EU: P/N 90356500Exterior 400 IP™ Narrow, US: P/N 90356510Exterior 400 IP™ Medium, EU: P/N 90507050Exterior 400 IP™ Medium, US: P/N 90507060Exterior 400 IP™ Wide, EU: P/N 90356540Exterior 400 IP™ Wide, US: P/N 90356550Custom colors available by special order - please contact your Martin distributor for details

Exterior 400 IP specifications