ethercat n-smart series library for sysmac studio tech note · ethercat n-smart series library...
TRANSCRIPT
N-SmartE3NW-DS
Distributed Sensor Unit
N-SmartE3NX-FA0 and other Sensor Amplifier Units
N-SmartE3NW-ECT
SensorCommunicationsUnit for EtherCAT
Inter-unit network
*1. The Backup and Restore functions of the NJ/NX CPU Unit can back up and restore the parameters for all the E3NW-ECT Sensor Communication Units at once.
The addition of this library allows you to back up and restore the parameters for each node individually.
*2. This library can be used to back up and restore parameters for each sensor amplifier unit individually, which is not possible with the Backup and Restore
functions of the NJ/NX CPU Unit.
*3. The DS-Bus is an Omron inter-unit network communications protocol that connects the E3NW-ECT Sensor Communications Unit and E3NW-DS
Distributed Sensor Units.
①② ①E3NW Parameter Backup
Stores all the parameters for the specified sensor
amplifier unit as a backup file on the SD memory
card.
②E3NW Parameter Restore Restores the parameters stored as a backup file
on the SD memory card to the specified sensor
amplifier unit.
As any unit can be specified, this Function Block
can be used to copy the parameters from one
sensor amplifier unit to another.
NJ/NX Machine Automation Controller
NA/NSProgrammable Terminal
System configuration
*3
SD Memory Card
Parameters of each communica-tions unit or amplifier unit can be backed up for each product. Easily and quickly change settings for different products just by specify-ing the parameters to restore on the Programmable Terminal.
Ethernet
EtherCAT N-Smart Series Library
Sysmac Library for NJ/NX Machine Automation Controller
SYSMAC-XR005
Reduce sensor setting and replacement work at setup, changeover, maintenance, andoperation times.
Issue 1 It takes time to set up many sensors.
Issue 2 Operation rates are low because it takes time to change sensor settings.
Issue 3 When a sensor is replaced, time is needed to change settings and setting errors may occur.
EtherCAT N-Smart Series Library offers solution!The Parameter Backup Function Block backs up the parameters for each sensor communications unit*1 or
sensor amplifier unit*2 individually (upload settings from the unit), and the Parameter Restore Function Block
restores them individually (download settings to the unit), without connecting to a PC.
You can easily change settings for sensor communications units and sensor amplifier units.
Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is registered trademark and patented technology, licensed by Beckho� Automation GmbH, Germany.EtherNet/IP™ is a trademark of the ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
Note: Do not use this document to operate the Unit.
①
②
①
③
NJ/NX Machine Automation Controller
E3NW-ECT Sensor Communications Unitfor EtherCAT
E3NX-FA0 and other Sensor Ampli�er Units
Sysmac Studio
NJ/NX Machine Automation Controller
NX701-□□□□/NJ101-□□□□
NJ501-□□□□/NJ301-□□□□
SYSMAC-SE2□□□
Version 1.10 or later
Version 1.01 or later
Version 1.14 or higher
Version 1.03 or later
ー
ー
ー
ー
ー
ー
NameCompatible Models
Model Version
Machine Automation Controller NJ/NX CPU Unit
Automation Software Sysmac Studio
Sensor Communications Unit (EtherCAT)
Distributed Sensor Unit
Smart Laser Ampli�er Unit
Smart Laser Ampli�er Unit (CMOS type)
Smart Fiber Ampli�er Unit
Contact-Type Smart Ampli�er Unit
SD Memory Card
Downloading settings when replacing a sensor amplifier unit
From To
FB nameFunction Block (FB) Specifications
Name Description
Backup_E3NW
Restore_E3NW
E3NW Parameter Backup Backs up the parameters for the sensor ampli�er unit that is connected to an E3NW-ECT Sensor Communications Unit or E3NW-DS Distributed Sensor Unit and stores them on the SD memory card inserted into the controller.
E3NW Parameter RestoreRestores the backup data on the SD memory card to the sensor ampli�er unit that is connected to an E3NW-ECT Sensor Communications Unit or E3NW-DS Distributed Sensor Unit.
②
E3NW-ECT Sensor Communications Unitfor EtherCAT
E3NX-FA0 and other Sensor Ampli�er Units
③
E3NW-ECT
E3NW-DS
E3NC-LA0
E3NC-SA0
E3NX-FA0
E3NC-TA0
HMC-SD□□□
SD Memory CardParameters can be restored by operating the programmable terminal. No PC, setting software, or complex procedures that may cause errors is required.
① Manually record parameters to make a procedure manual② Replace a sensor amplifier unit③ Set parameters manually according to the procedure manual
① Store parameters on an SD memory card② Replace a sensor amplifier unit③ Restore the parameters stored on the SD memory card
OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]
OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES54.11.4783.5300
Authorized Distributor:
P094-E1-01 11/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers • Single and Multi-loop Controllers
Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors
Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies
Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety
Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu