ergo & ermatic access hatches and covers - ej
DESCRIPTION
Modular Access Hatches and Covers. Able to withstand heavy duty loads including airport & airplane traffic.TRANSCRIPT
ejco.com 800 626 4653
InnovativeAccess Solutions
2
Innovative Access Solutions
ejco.com 800 626 4653
Table of Contents
Product Description Page
Innovative Access Solutions Captive Hinge Access Assembly
ERGO® Access Assembly
ERGO® XL Access Assembly
8210 Heavy Duty Hinged Access Assembly
3
4
4
6
8190 Extra Heavy Duty Hinged Access Assembly
5624 Heavy Duty Hinged Grate Assembly
SelfLevel® Access Assembly
ERGO® SELFLEVEL® Access Assembly
Revolution® Access Assembly
ERMATIC®
Multi-Leaf Hinged Covers
Campression® Watertite Assembly
6
8
9
9
10
10
11
11
Table of Contents
Please note: The Captive Hinge is not a requirement for the function of this product.
3
Innovative Access Solutions
ejco.com 800 626 4653
The Captive Hinge Access Assembly is an advanced solution that addresses many of the dangerous situations now present in the market such as cover theft, ergonomics, safety, pressure relief, and security. Once a cover with a captive hinge pin is installed, the cover cannot be removed.
Standard Features
Heavy duty (H25 loading)GasketedSafety catch at 90°Ductile iron cover and frameMPIC® multi-tool pick barCaptive hinge (patent pending)Non-slip surface
Options
Drainage gratesSpecial lettered coversCustom logosEnvironmental messagingWireless remote monitoringSecurity — Cam lock, boltingMultiple frame openings and frame heights availableCaptive hinge optional pin makes cover non-removable
CAPTIVE HINGE ACCESS ASSEMBLY
A cover can be made captive before delivery, during installation, or after installation.
Drainage grate Wireless remote monitoring Retrofitting after installation
Before installation with captive hinge
Images above are modified for viewing of captive hinge.
4
Innovative Access Solutions
ejco.com 800 626 4653
Standard Features/Options
Heavy duty Gasketed Safety catch at 90° Ductile iron cover MPIC® multi-tool pick bar
Available on SelfLevel®
Special lettered covers Custom logo covers Environmental messaging Grates available Cam lock security Bolted Eon Lock® designWater resistant Top flange available Multiple frame openings and heights available 4”, 6”, 7” ht. frames
Standard Features/Options/Material Specifications
Heavy duty Gasketed Safety catch at 90° Ductile iron cover MPIC® multi-tool pick bar
Special lettered covers Custom logo covers Environmental messaging Grates available Cam lock security Bolted Eon Lock® designWatertite seal Lift assist Top flange available Multiple frame openings and heights available (see table)
Frame Clear Openings and Heights
Clear Opening Frame Height
30 4 1/2
30 5 1/2
36 6
Note: All dimensions are in inches.
ERGO® ACCESS ASSEMBLY ERGO® XL ACCESS ASSEMBLY
Multiple frame openings and heights available. Multiple frame openings and heights available.
Our patent pending hinge design allows the cover to open up to 120°, where it rests in a safe and secure position. From the 120° position, the cover can be safely removed.
Safe Cover Removal
Safe Removal at 120
o120°
Cam Lock Wren
ch
The cam lock provides improved security to frame and cover assemblies, and also eliminates loose and missing fasteners. The cam lock wrench is only removable when the cover is in the locked position, so you can be sure it is engaged.
The MPIC® multi-tool pick bar design eliminates surface water inflow and provides a solid point of contact for most removal tools used in the U.S. (hooks, pry bars, pick-axes, and lift assist mechanisms).
Security Cam Lock
Cam Lock Security Option
MPIC® Multi-tool Pick Bar —Improved stability and increased leverage
Pry bar
Our patent pending ERGO hinge design also has a safety catch at 90° to prevent accidental closing.
Patent Pending
ERGO® Access Assembly with Infra-Riser® Rubber Adjustment Riser
The cover can be removed at the 90o position. Patent pending.
Optional lift assist is a corrosion-resistant stainless steel mechanical spring strut that reduces the lifting force of the cover to less than 50 pounds. It is available only on the ERGO® XL.
Optional Lift Assist
Lift Assist with the The rugged design is clean and
maintenance free. The strut takes up less space in the clear opening than a traditional spring assist. It is fully self-contained, which avoids high stress exposed coils.
Made without internal gases or seals, the struts have an effective operating temperature range of -30° F to 400° F. The durability has been tested at over 150,000 cycles.
5
Innovative Access Solutions
ejco.com 800 626 4653
· MPIC® multi-tool pick bar · Safe cover removal · Safety catch · Cam lock · Lift assist
Innovative Features and OptionsERGO® Access Assembly andERGO® XL Access Assembly
Self-engaging Safety Bar
Self-engaging Safety Bar
6
Innovative Access Solutions
ejco.com 800 626 4653
The 8210 series is typically installed in high traffic areas and provides a secure and easy access point to underground utility structures. The unit comes pre-assembled to the job site; just “drop and pour!” The optional mechanical strut reduces the lifting force of the cover to less than 50 pounds.
Standard Features
Ductile iron frame and coverMPIC® multi-tool pick barEon Lock®
Cover opens to 105o, safety catch and removal of cover at 90o
Options
Special lettered coversWater resistant BoltingLift assistTop or bottom flange frame
The 8190 Extra Heavy Duty Hinged Hatch Access Assembly is typically installed in high traffic areas, airports, and ports. Our airport rated hinged hatch provides a secure and easy access point to underground utility structures. The standard mechanical strut reduces the lifting force of the cover to less than 50 pounds.
Standard Features
Ductile iron frame and coverLift assistMPIC® multi-tool pick barEon Lock®
Cover opens to 105o, safety catch and removal of cover at 90o
Options
Heavy dutyExtra heavy duty airportSpecial lettered coversWater resistant BoltingTop or bottom flange frame
8210 HEAVY DUTY HINGED ACCESS ASSEMBLY
8190 EXTRA HEAVY DUTY HINGED ACCESS ASSEMBLY
Frame Clear Openings
Catalog Number Clear Opening
8215 24 x 24
8216 30 x 30
8216 - Double 30 x 62
8217 36 x 36
8217 - Double 36 x 74
8218 48 x 48
Note: All dimensions are in inches.
Frame Clear Openings
Catalog Number Clear Opening
8195 24 x 24
8196 30 x 30
8196 - Double 30 x 62
8197 36 x 36
8197 - Double 36 x 74
8198 48 x 48
Note: All dimensions are in inches.
Top flange frame
Bottom flange frame design with Infra-Riser® Rubber Adjustment Riser
The MPIC® multi-tool pick bar design eliminates surface water inflow and provides a solid point of contact for most removal tools used in the U.S. (hooks, pry bars, pick-axes, and lift assist mechanisms).
MPIC® Multi-tool Pick Bar —Improved stability and increased leverage
Pry bar
8196 Double Assembly 30 x 62
Mechanical Strut
Lift Assist is a corrosion-resistant stainless steel mechanical spring strut. The rugged design is clean and maintenance free. The strut takes up less space in the clear opening than a traditional spring assist. It is fully self-contained, which avoids high stress exposed coils.
Made without internal gases or seals, the struts have an effective operating temperature range of -30° F to 400° F. The durability has been tested at over 150,000 cycles.
Self-engaging Safety Bar
7
Innovative Access Solutions
ejco.com 800 626 4653
The 8190 Extra Heavy Duty Hinged Hatch Access Assembly is typically installed in high traffic areas, airports, and ports. Our airport rated hinged hatch provides a secure and easy access point to underground utility structures. The standard mechanical strut reduces the lifting force of the cover to less than 50 pounds.
Standard Features
Ductile iron frame and coverLift assistMPIC® multi-tool pick barEon Lock®
Cover opens to 105o, safety catch and removal of cover at 90o
Options
Heavy dutyExtra heavy duty airportSpecial lettered coversWater resistant BoltingTop or bottom flange frame
· MPIC® multi-tool pick bar · Double assembly available · Self-engaging safety bar · Lift assist
Innovative Features and Options8210 Heavy Duty Hinged Access Assembly and 8190 Extra Heavy Duty Hinged Access Assembly
8
Innovative Access Solutions
ejco.com 800 626 4653
5624 HEAVY DUTY HINGED GRATE ASSEMBLY
Multiple clear openings available.
Self Wedge Seating: The self wedge seating areas are angled so traffic pushes the grate into the frame to prevent rocking.
Slam Lock: Our patented slam lock design is an integral arm that moves when the grate is shut preventing the grate from being opened inadvertently.
Patented Slam Lock
Benefits
Heavy dutyHalf the weight of standard unitsTwo times the loading30% more open areaSelf lockingErgonomic
Standard Features
Heavy dutySquare grate 290 sq. in. open areaDuctile iron frame and grate meet ASTM A536 requirementsLightweight grate opens to 115O and removes at 90O Self-wedging grate seatingSlam lock (locking feature)
Options
Special lettered coversTop flange frame 2, 3, and 4 flanges availableMultiple frame heights and grate sizes available
9
Innovative Access Solutions
ejco.com 800 626 4653
Standard Features
Heavy dutyMachined bearing surfacesUpper frame is supported by road surfaceUnit stays level with the road surface, even when road heaves due to extreme temperature changesProof load exceeds AASHTO M306 and M105 standardsFrame fits with existing manhole covers
Options
Special lettered coversCustom logo coversEnvironmental messagingEon Lock® Cam lockNeoprene gasket for coverWatertite assemblyAdjusting risersMultiple frame openings and heights available
Standard Features
Heavy dutyCover opens to 120o
Cover safety catch at 90o and removes at 120o
Options
Special lettered coversCustom logo coversEnvironmental messagingEon Lock® Cam lock securityNeoprene gasket for coverWatertite assemblyGrates available
SELFLEVEL® ACCESS ASSEMBLY ERGO® SELFLEVEL® ACCESS ASSEMBLY
Once installed, the unit will continue to move with the road surface. The road surface aids in absorption of traffic vibration and shock, further protecting the life of your infrastructure and critical underground structures.
· Frost Heave/Uplift · Manhole Structure Settling · Site Deterioration · Pavement Cracking
· Inclined Installations · Ride Quality and Smooth Street Initiatives
SELFLEVEL® HELPS ELIMINATE:
10
Innovative Access Solutions
ejco.com 800 626 4653
Standard Features
Non-trafficNeoprene gasketLightweight cover — easy to open, no lifting required, and takes only one person to operateCover remains attached to frameEon Lock®
Options
Special letteringWater resistantSecurity bolting
Features and Benefits
Pedestrian to airport ratedWater resistantSecurity lockingLift assistExtended clear opening access solution utilizes locking modular covers with a removable I-beam supportStandard sizes between 2' x 2' to 10' x 17'Custom sizes available Continuous trench covers for any length. Beamed multiple covers for large openings.
REVOLUTION® ACCESS ASSEMBLY ERMATIC® MODULAR COVERS
The ERMATIC® is produced in France.
Perfect for large convention centers, malls, airports, and port authority applications.
PATENT NO. 7,832,958
Cover rotates about stainless steel rod.
This solution is designed for elevated structures and other raised access point applications.
11
Innovative Access Solutions
ejco.com 800 626 4653
Standard Features
Heavy dutyCover opens to 115o
Cover safety catch and removes at 90o
Patented product
Options
Ductile iron gratesSecurity locking systemLift assistSelfLevel® frameSpecial lettering
Standard Features
Heavy duty Cam locks with Eon Lock® bolts1/4" round neoprene gasketEPIC® closed pick slots
Options
Custom logo coverSpecial lettered cover
MULTI-LEAF HINGED COVER CAMPRESSION® WATERTITE ASSEMBLY
The Mult-leaf Hinged Cover is produced in France.
Bolting: Eon Lock® replaceable threadsNo need to remove bolts! Just loosen bolts and rotate cam.
30" Four Bolt Design Custom logo and special lettered cover with Infra-Riser® Rubber Adjustment Riser.
24" Three Bolt Design
Cam Locks: Stainless steel cam locks rotate to open cover, and back to tighten and secure cover.
Closed with cap on Cap off, loosen bolt, rotate cam
Rotate 90o to open
NeopreneGasket
The Campression® Watertite Assembly solution eliminates water infiltration, controls odor, and provides improved security.
East Jordan Iron Works, Inc., East Jordan, Michigan, USA, and its affiliated companies including Norinco in France, Cavanagh in Ireland, McCoy Construction Castings in Canada, and HaveStock in Australia, are pleased to announce that since January 2012, all are conducting business under one brand, EJ.
As EJ, we will continue to provide the same quality products and excellent service that our customers have come to expect. One global name and brand will unify the company and support our vision to be the global leader in infrastructure access solutions.
EJ USA, Inc.301 Spring StreetPO Box 439 East Jordan, MI 49727 800 626 4653 231 536 2261 ejco.com
Registered Mark(s)
Americas800 626 4653
231 536 2261
EMEAEurope, Middle East and Africa
+33 (0)344 08 28 00
Asia-Pacific+61 (0)7 3216 5000
IAS USA 0312