equipment guide guide construction, power and lighting compaction equipment rammers ..... 4 rollers:...

Equipment GuideConstruction, power and lighting

Compaction Equipment

Rammers .....................................................................................................4Plate Compactors........................................................................................5Rollers: Walk-Behind Single and Tandem Drum .......................................6Rollers: Trench .............................................................................................7Rollers: Ride-On Tandem Drum .................................................................8

Generators, Air Compressors and Welders

Generators: 2.5kW to 9.7kW ......................................................................9Generators: 10kW to 150kVA ..............................................................10-12Air Compressors .......................................................................................13Welders ......................................................................................................14

Trailers

Heavy Duty Trailers ...................................................................................15

Lighting Solutions

GloBug Balloon Lights and GloBug 4-Spot Light Towers ......................16Towable Light Towers ..........................................................................17-18

Dewatering Equipment

Pumps: Submersible ................................................................................ 19Pumps: Centrifugal ...................................................................................20Pumps: Trash and Diaphragm .............................................................21-23Water Trailers .............................................................................................24

Concrete-Masonry Technologies Equipment

Pumps: Concrete-Masonry ......................................................................25Mixers: Concrete Towable ........................................................................26Mixers: Plaster/Mortar Towable/Mudtub ............................................27-29Rebar Benders & Cutters .........................................................................30Power Buggies ..........................................................................................31Concrete Vibrators: MGX and Flex-Shaft ................................................32Concrete Vibrators: Micon High-Cycle ....................................................33Concrete Vibrators: High-Cycle ................................................................34Screeds: SuperScreed, DuoScreed .........................................................35Screeds: Vibratory Truss ...........................................................................36Trowels: Walk-Behind Standard ...............................................................37Trowels: Walk-Behind Heavy-Duty and Epoxy ........................................38Trowels: Ride-On Mechanical and Hydrostatic..................................39-40Concrete Solutions ..............................................................................40-41Diamond Blades, Saws: Masonry ...........................................................42Saws: Masonry, Tile, Pavement ..........................................................43-44Core Drill Machines ..................................................................................45

Ordering Information ..............................................................47

NOTE: Specifications valid at time of printing and may change due to continuous product development. Not responsible for typographical errors.

The standard in high-quality equipment solutions.In business for four decades, Multiquip is one of the largest, most diversified manufacturers and suppliers of world class quality products and solutions for the construction, industrial, telecom, government, non-commercial, aerospace, entertainment, and oil and gas exploration markets.

Multiquip’s comprehensive product portfolio encompasses light to medium construction equipment, power generators and lighting. Servicing customers worldwide, Multiquip distributes its products in more than 70 countries through thousands of authorized distribution partners.

RA

MM

ERS

MIKASA RAMMERS Features• Four cycle engines available from Honda

and Subaru• Optional shoe sizes and extensions available• Cyclone air filtration system on MTX series• Cam-type clutch• Grease- and oil-bath-lubricated models

Technical specifications

MTX SERIESRAMMERS

4 Cycle EnginesHonda and Subaru offerings to meet operator preferences.

MTX-series rammers feature an anti-vibration handle that significantly reduces operator fatigue.

All new throttle design enables contractor to control engine speed and fuel delivery with a single lever.

Combination tachometer and engine hour meter provides engine RPM and helps track service intervals.

MODEL IMPACT FORCE LBS (KN)

BLOWS MIN MAX.

ENGINEMAKE MODEL

HP(KW)1

SHOE SIZEWIDTHIN (MM)

OPER. WEIGHT LBS (KG)

MTR40SF 1,215 (5.4) 695 SUBARU EH09 2.4 (1.8) 5.9 (150) 101 (46)

MTX60HD 3,064 (13.6) 695 HONDA GX100 2.8 (2.1) 10.4 (265) 141 (64)

MTX60SD 3,064 (13.6) 695 SUBARU ER12 3.5 (2.6) 10.4 (265) 141 (64)

MTX70HD 3,350 (14.9) 690 HONDA GX100 2.8 (2.1) 11.2 (285) 165 (75)

MTX70SD 3,350 (14.9) 690 SUBARU ER12 3.5 (2.6) 11.2 (285) 165 (75)

MTX80SD 3,505 (15.6) 678 SUBARU ER12 3.5 (2.6) 11.2 (285) 181 (82)

1 See page 46 for details.

COMPACTION EQUIPMENT4

MIKASA FORWARD PLATE COMPACTORSFeatures• Hour/tachometer standard on MVC88 series• Cyclonic pre-cleaner on MVC88 series• Removable water tank on select models• Low-vibration handles on selected models• Cogged belt drive on MVC88-series• Open base plate design

PLATE C

OM

PAC

TOR

S

Technical specificationsMODEL CENTRIFUGAL

FORCE LBS (KN)

EXCITER SPEEDVPM

SPEED MIN

FT (M)

ENGINE HP (KW)1

PLATE WIDTHIN (MM)

OPER.WEIGHT LBS (KG)

MVC64VH 2,275 (10.1) 5,600 82 (25) HONDA GX120 3.5 (2.6) 13.8 (350) 151 (68)

MVC64VHW 2,275 (10.1) 5,600 82 (25) HONDA GX120 3.5 (2.6) 13.8 (350) 157 (71)

MVC82VH 3,080 (13.7) 5,600 72 (22) HONDA GX160 4.8 (3.6) 17.7 (450) 175 (79)

MVC82VHW 3,080 (13.7) 5,600 72 (22) HONDA GX160 4.8 (3.6) 17.7 (450) 181 (82)

MVC88VTH* 3,372 (15) 6,000 82 (25) HONDA GX160 4.8 (3.6) 19.7 (500) 207 (95)

MVC88VTHW* 3,372 (15) 6,000 82 (25) HONDA GX160 4.8 (3.6) 19.7 (500) 229 (104)

MVC90H 3,417 (15.2) 5,800 82 (25) HONDA GX160 4.8 (3.6) 19.7 (500) 194 (88)

*Wheel kit and Urethane pad attachment optional. 1 See page 46 for details.

Technical specificationsMODEL CENTRIFUGAL

FORCELBS (KN)

EXCITER SPEEDVPM

SPEED MIN

FT (MM)

ENGINE HP (KW)1

PLATE WIDTHIN (MM)


MVH120VGH 5,058 (22.5) 6,000 75 (23) HONDA GX160 4.8 (3.6) 15.8 (400) 256 (116)

MVH150VGH 6,070 (27) 5,400 82 (25) HONDA GX200 5.5 (4.1) 16.9 (430) 331 (150)

MVH208GH 8,318 (37) 5,200 85 (26) HONDA GX240 7.1 (5.3) 20 (510) 463 (210)

MVH308GH 10,116 (45) 4,400 79 (24) HONDA GX270 8.5 (6.3) 24 (600)* 717 (325)

MVH308DZ 10,116 (45) 4,400 79 (24) HATZ 1B30 6.6 (4.9) 24 (600)* 794 (360)

MVH408GH 12,365 (55) 4,400 82 (25) HONDA GX390 11.7 (8.7) 26 (650)* 836 (379)

MVH408DZ 12,365 (55) 4,400 82 (25) HATZ 1B50 9 (6.7) 26 (650)* 933 (423)

MVH508DZ 14,613 (65) 4,150 82 (25) Hatz 1D81S 11.9 (8.9) 26 (650)* 1,182 (536)

*Plate width includes 6" extensions.Electric start models do not include battery.


COMPACTION EQUIPMENT multiquip.com

MIKASA REVERSIBLE PLATE COMPACTORSFeatures• High-horsepower gasoline and diesel engines• Selected models include hour/tachometer• Selected models include cyclone pre-cleaner• Selected models include extension plates

as standard• Hydraulic forward and reverse • Adjustable handle height• Heavy-duty vibrator bearings

5

WA

LK-B

EHIN

D R

OLLER

S

WALK-BEHIND SINGLE-DRUM ROLLERS Features• Maintenance free vibratory assembly• Elongated steering handle• Patent pending plastic water tank• Three water flow adjustment settings• Hour/Tachometer• 29" wide steel drum• Adjustable transport hooks• Hydrostatic drive system

COMPACTION EQUIPMENT


MIKASA WALK-BEHIND ROLLERS Features• Water tank and spray bars• Gasoline and diesel engines• Hydrostatic drive• Narrow profile• External vibrator• Front bumper and work light

MODEL CENTRIFUGAL FORCE

LBS (KN)

VPM (HZ)

DRUM WIDTH IN (MM)

ENGINE HP (KW)1

START METHOD

OPER.WEIGHT LBS (KG)

MRH800GS 5,300 (23.5)

3,300(55.3)

25.6(650)

HONDA GX390

11.7 (8.7)

ELECTRIC/RECOIL

1,530(694)

MRH601DS 2,428 (10.8)

3,300(55.3)

25.6(650)

KUBOTA EA330-E3

6.2 (4.6)

ELECTRIC/RECOIL

1,248 (566)


Electric start models do not include battery. 1 See page 46 for details.


LBS (KN)

VPM DRUM WIDTH

IN (MM)

ENGINE HP (KW)1

START METHOD


V305EH 3,800 (16.9) 4,200 29

(737)HONDA GX340

10.7 (7.9)

ELECTRIC/RECOIL

1,168 (530)


6

RAMMAX TRENCH ROLLERSFeatures• Skid steer drive with 24" and 33" drum

width options• Solar and cable remote controls• Five year warranty on hydrostatic drive,

motor assembly and eccentric bearings• Two year warranty on all remaining

components – see warranty sheet for full details

TREN

CH

RO

LLERS

COMPACTION EQUIPMENT multiquip.com


Technical specificationsMODEL ROLLER

DRUM WIDTH IN (MM)

CENTRIFUGAL FORCE

LBS (KN)

ENGINE HP(KW)1

OPER. WEIGHTLBS (KG)

REMOVABLEDRUM RINGS

RX1575 24 (640)/ 33 (850)

16,860 (75) High 8,430 (37.5) Low

YANMAR 3TNV80/EPA 4F

20.4 (15)

3,087 (1,400)/ 3,197 (1,450) OPTIONAL

RX157533 33 (850)

16,860 (75) High 8,430 (37.5) Low

YANMAR 3TNV80/EPA 4F

20.4 (15)

3,197 (1,450) NA


LBS (KN)

VPM(HZ)

DRUM WIDTH OPTIONS IN (MM)

ENGINE HP(KW)1

OPER.WEIGHTLBS (KG)

RW1585MI 19,333 (86)

1,800(30)

33/24(838/610)

HATZ 2G40

18.5(13.8)

3,175/3,263(1,440/1,480)



RAMMAX ARTICULATING TRENCH ROLLERS Features• Articulating roller with flexible drum

options for 24" and 33" working widths including removable drum rings

• Durable articulation joint requires no greasing

• Oscillating joint keeps drum rolls in contact with soil for optimum compaction

• Yanmar engine delivers reliable starting and performance

• Infrared remote charges using solar power and automatically synchronizes with the roller

• Front and rear covers provide easy access to all maintenance points

7

RIDE-ON TANDEM DRUM ROLLERS AR14H Features• Compact design• Articulated steering• Maintenance free articulation

joint and vibratory assembly• Integrated hour/tachometer• 12V power outlet and cup holder

on cockpit• Easy access to service points• 35 gallon water tank• R2000H roller uses static force

to deliver value compaction


LBS (KN)

VPM (HZ)

DRUM WIDTH

IN (MM)

SPEED MPH (KPH)

ENGINE HP (KW)1

OPER.WEIGHT LBS

(KG)

AR14H 3,400 (15.1) 4,200 (70) 35.6 (904) 0-4.8 (0-7.7) HONDA GX630 20.8 (15.5) 2,688 (1,219)

R2000H STATIC N/A

28 (711)FRONT;32 (813) REAR

0-5.6 (0-9) HONDA GX240 7.1 (5.3) 2,235 (1,014)


1 See page 46 for details.R

IDE-O

N R

OLLER

S

COMPACTION EQUIPMENT8

GENERATORS multiquip.com

POR

TAB

LE GEN

ERA

TOR

SMQ POWER PORTABLE GENERATORS Features• Sizes ranging from 2,500 to 9,700 watts• Two-year warranty• Voltage regulation maintained

within ± 3%• Brushless design minimizes

maintenance• Idle control on GA 36, GA 6, GA 97 and

DA 7000SSA2 models• Optional wheel kits available for GA 25, GA 97,

DA 7000SSA2 • All receptacles GFCI protected (USA only)

CANADIAN SPECIFICATIONS

GAC25HR† 2,500/2,200 120V 20.8/18.3@120V HONDA GX160

4.8 (3.6)

RECOIL 112(51)

GAC36HR† 3,600/3,200 120V/ 240V

30/26.6@120V15/13.3@240V

HONDAGX240

7.9 (5.9)

RECOIL 176(80)

GAC6HR† 6,000/5,000 120V/ 240V

50/41.6@120V25/20.8@240V

HONDAGX340

10.7 (8.0)

RECOIL 198(90)

GAC6HRS*† 6,000/5,000 120V/ 240V

50/41.6@120V25/20.8@240V

HONDAGX340

10.7 (8.0)

ELECTRIC/RECOIL

220(100)

GAC97HEA† 9,700/8,400 120V/ 240V

80.8/[email protected]/35@240V

HONDAGX610

16.6 (12.4)

ELECTRIC 341(155)

DAC7000SSA† 7,000/6,000 120V/ 240V


KUBOTAZ482

12.5 (9.3)

ELECTRIC 529(240)

See page 32 for high-cycle generators for FXA vibrators

* Optional battery available

† Canada only

Technical specificationsMODEL WATTS

MAX/CONTVOLTAGE AMPERAGE

MAX/CONTENGINE HP

(KW)1STARTER

TYPEDRY

WEIGHT LBS (KG)

GA25HR 2,500/2,200 120V 20.8/18.3@120V HONDA GX160

4.8 (3.6) RECOIL 110(50)

GA36HR 3,600/3,200 120V/ 240V

30/26.6@120V15/13.3@240V

HONDAGX240

7.9 (5.9) RECOIL 170(77)

GA6HR 6,000/5,000 120V/ 240V

50/41.6@120V25/20.8@240V

HONDA GX340

10.7 (8.0)

RECOIL 194(88)

GA6HRS* 6,000/5,000 120V/ 240V

50/41.6@120V25/20.8@240V

HONDAGX340

10.7 (8.0)

ELECTRIC/RECOIL

216(98)

GA97HEA* 9,700/8,400 120V/ 240V


HONDA GX610

16.6 (12.4)

ELECTRIC 337 (153)

DA7000SSA 7,000/6,000 120V/ 240V


KUBOTAZ482

12.5 (9.3)

ELECTRIC 527(239)

DA7000SSA2GH Single side service

7,000/6,000 120V/ 240V


KUBOTAZ482

12.5 (9.3)

ELECTRIC 527(239)


9

GENERATORS

MO

BILE G

ENER

ATO

RS

MQ POWER WHISPERWATTFeatures• Ideal for portable, standby and

special events• Highway-legal trailers and

auxiliary fuel tanks available• Patented Open-Delta generator

offers “best in class” motor starting• Excellent voltage and frequency regulation• Designed for low-noise operation - surpasses OSHA standards• Full engine and generator instrumentation• Tier 4 engines on select models

Technical specifications 7-36 kVA–Single Phase • 25-150 kVA–Single/Three Phase

MODEL STANDBY OUTPUT

KW (KVA)

PRIME OUTPUT

KW (KVA)

AMPS 1-PHASE

120V

AMPS 1-PHASE

240V

AMPS 3-PHASE

240V

AMPS 3-PHASE

480V

WET WEIGHT LBS (KG)

TRAILER

DA * 7000SSA2

7 (7)

6 (6)

25 (2 SETS) 25 – – 582

(264)TRLR10W,

TRLRMP(XF)

DA *7000SSA2GH Single side service

7 (7)

6 (6)

25 (2 SETS) 25 – – 597

(271)TRLR10W,

TRLRMP(XF)

DCA * 10SPXU4C

11 (11)

10 (10)

41.7 (2 SETS) 41.7A – – 1,250

(567) TRLRMP(XF)

DCA * 15SPXU4F

15 (15)

14 (14)

58.3A (2 SETS) 58.3A – – 1,397

(620) TRLRMP(XF)

DCA * 20SPXU4F

22 (22)

20 (20)

83A (2 SETS) 83A – – 2,138

(970) TRLR25US

DCA * 25SSIU4F

22 (27.5)

20 (25)

55.6A (4-WIRE)

27.8A (4-WIRE) 60A 30A 2,138

(970) TRLR25US

DCA * 36SPXU4F

40 (40)

36 (36)

150A (2 SETS) 150A – – 3,087

(1,400) TRLR45

DCA * 40SSKU4F

29.7 (37)

28.8 (36)

40A (4-WIRE) 86A 43A – 2,823

(1,280) TRLR45

DCA * 45SSIU4F

40 (50)

36 (45)

100A (4-WIRE)

50A (4-WIRE) 108A 54A 2,976

(1,350) TRLR45

DCA * 70SSIU4F

62 (77)

56 (70)

155.4A (4-WIRE)

77.8A (4-WIRE) 168A 84A 4,211

(1,910) TRLR70US

DCA * 125SSIU4F

110 (137.5)

100 (125)

277.8A (4-WIRE)

138.9 (4-WIRE) 300A 150A 6,702

(3,040) TRLR125US

DCA * 150SSJU4F

132 (165)

120 (150)

333.3A (4-WIRE)

166.7A (4-WIRE) 361A 180A 7,497

(3,400) TRLR180(XF)


KW (KVA)

PRIME OUTPUT

KW (KVA)

AMPS 1-PHASE

120V

AMPS 1-PHASE

240V

AMPS 3-PHASE

240V

AMPS 3-PHASE

480V

WET WEIGHT LBS (KG)

TRAILER

DCA *** 220SSJU4F

194 (242)

176 (220)

489A (4-WIRE)

244.4A (4-WIRE) 529A 264.5A 8,489

(3,850) TRLR220(XF)

DCA *** 300SSJU4F

264 (330)

240 (300)

666.7A (4-WIRE)

333.3A (4-WIRE) 722A 360 10,912

(4,960) TRLR325(XF)

MQP ** 240

264 (330)

240 (300)

666.7A (4-WIRE)

333.3A (4-WIRE) 722A 360A 8,865

(4,020) TRLR325(XF)

DCA *** 400SSI4F

336 (420)

320 (400)

888.9A (4-WIRE)

444.4A (4-WIRE) 962.3A 481.1A 13,184

(5,980) TRLR400(XF)

DCA *600SSV

528 (660)

480 (600)

1333.3 (4-WIRE)

666.7 (4-WIRE) 1,443.4A 721.7A 17,662

(8,010) TRLR800

DCA *800SSK

704 (880)

640 (800)

1777.8A (4-WIRE)

888.9A (4-WIRE) 1,924.6A 962.3A 25,308

(11,479) TRLR800

Technical specifications 220-800 kVA–Single/Three Phase

* TIER 4f

* TIER 2** TIER 3*** TIER 4f

Optional trailer

10

GENERATORS multiquip.com

MQ POWER ULTRA-SILENT (CANADA ONLY)

Features• Ultra-silent design for critical

low noise applications (excludes DCA20SPX)

• Ideal for standby, municipal, mobile telecom and studio entertainment

• Integrated fuel tank provides for 24-hour operation at full load (excludes DCA20SPX)

• Environmental skid design allows for full fluid containment with float switch and alarm light (excludes DCA20SPX)

• Excellent voltage and frequency regulation• Single axle and tandem axle highway-legal trailers available• Equipped with block header and thermostatically controlled

electric fan for cold weather (excludes DCA20SPX)• CSA listed


KW (KVA)

PRIME OUTPUT KW (KVA)

AMPS 1-PHASE

120V

AMPS 1-PHASE

240V

AMPS 3-PHASE

240V

AMPS 3-PHASE

480V

WET WEIGHT LBS (KG)

TRAILER AMPS @600V/

3PH1

DCA * 20SPX

22 (22)

20 (20)

83.2 (x2)(4-WIRE)

83 (4-WIRE) – – 1,440

(653) TRLR50XF NA

CANADAN SPECIFICATIONS†

DCA * 25USI4CAN

22 (27.5)

20 (25)

55.6(4-WIRE)

27.8 (4-WIRE) 60 30 2,104

(954) TRLR25US 24.0

DCA * 45USI4CAN

40 (50)

36 (45)

100 (4-WIRE)

50 (4-WIRE) 108 54 3,450

(1,565) TRLR45 43.3

DCA ** 70USI3CAN

62 (77)

56 (70)

155.4 (4-WIRE)

77.8 (4-WIRE) 168 84 4,564

(2,070) TRLR70US 67.3

DCA ** 125USI3CAN

110 (137)

100 (125)

277.8 (4-WIRE)

138.9 (4-WIRE) 300 150 7,342

(3,330) TRLR125US 120.2

DCA ** 150USJ3CAN

132 (165)

120 (150)

333.3 (4-WIRE)

166.7 (4-WIRE) 361 180 8,719

(3,955) TRLR150US 144.3


KW (KVA)

PRIME OUTPUT KW (KVA)

AMPS 1-PHASE

120V

AMPS 1-PHASE

240V

AMPS 3-PHASE

240V

AMPS 3-PHASE

480V

WET WEIGHT LBS (KG)

TRAILER AMPS @600V/

3PH1

CANADAN SPECIFICATIONS†

MQP240 ** 264 (330)

240 (300)

666.7A (4-WIRE)

333.3A (4-WIRE) 722A 360A 8,865

(4,020) TRLR325(XF) 288.6

Technical specifications Ultra-Silent

Technical specifications WhisperWatt

* TIER 4i ** TIER 3† Canada only

** TIER 3† Canada only

1 Optional–600V is factory ordered only

1 Optional–600V is factory ordered only

11

MO

BILE G

ENER

ATO

RS

Optional trailer

GENERATORS12

MO

BILE G

ENER

ATO

RS

MQ POWER NATURAL GASFeatures• Ideal for oil and gas fields• Basler DGC2020 microprocessor• MasterTrak™ 1-year telematics

service• EPA Emission certified


KW (KVA)

PRIME OUTPUT

KW (KVA)

AMPS 1-PHASE

120V

AMPS 1-PHASE

240V

AMPS 3-PHASE

240V

AMPS 3-PHASE

480V

WET WEIGHT LBS (KG)

TRAILER

NGA 150

132 (165)

120 (150)

333.3A (4-WIRE)

166.7A (4-WIRE) 361A 180A 7,341

(3,330) TRLR150


MQ POWER CONTAINER GENERATORSFeatures• Specially-designed container• 4" full containment• Ideal for portable and standby• Cummins heavy-duty

diesel engine• Power command digital

genset control

MODEL STANDBY OUTPUT KW

(KVA)

PRIME OUTPUT

KW (KVA)

AMPS 3-PHASE120,208

STANDBY/PRIME

AMPS 3-PHASE277,480

STANDBY/PRIME

AMPS 3-PHASE

480 STANDBY/

PRIME

FUEL TANK

CAPACITY GAL.

WET WEIGHT LBS (KG)

CG * 500C2

500 (625)

455 (569) 1,737/1,563 753/678 – 800 20,440**

(9,271)CG * 1000C2

1000 (1,250)

900 (1,125) – – 1504/1353 1,000 53,420**

(24,231)CG * 1500C2

1500 (1,875)

1365 (1,706) – – 2255

(2,052) 1,000 68,060** (30,871)


* TIER 2 ** Wet weight does not include fuel

Optional trailer

AIR COMPRESSORS multiquip.com 13

MQ POWER AIR COMPRESSORFeatures• 185 CFM• Quiet operation - sound attenuated, weather resistant housing reduced

noise to 69 db(A) (23 at full load)• Easy access to engine and air compressor through large lockable gull

wing side doors• Spacious, lockable internal tool box for storage of tools and hoses• Easy maintenance with external drains• 5 year Izusu engine warranty

MODEL CFM MAX PRESSURE

ENGINE HP (KW) FUEL CAPACITY

GAL (L)

LxWxH(IN)

WEIGHT WET

LBS (KG)

DIS 185SSI4F 185 125 ISUZU 4LE2T

49 (36.5)

22 (83)

128.5x65.6 x60.1

2,343 (1,065)


AIR

CO

MPR

ESSOR

S

WELD

ERS

WELDERS

MQ POWER ENGINE POWERED WELDERSFeatures• The industry’s most versatile line of

welder / generators • Simultaneous use of DC Welding and AC power

output on selected models • CC/CV welding output on 225 Amp and larger models • Dual welding capability on DLW330X2 and DLW400ESA4

for maximum productivity • Smart stick functions on DLW330X2 and DLW400ESA4.

Automatically starts/stops engine for optimal fuel conservation• Selected models feature E-mode to reduce fuel consumption

and noise levels • Optional remote available on selected models • AC receptacles GFCI protected

Technical specificationsMODEL DC

CURRENTDC

VOLTAGEDUTY CYCLE

CURRENT RANGE

POWER OUTPUT; AMPS

ENGINE WEIGHT LBS (KG)

LxWxH IN (CM)

TRAILER/ WHEEL KIT

GASOLINE

GAW135H** 135A 25.2V 40%@135A100%@80A 40-135A 1.5KW;

15HONDA GX200

114(52)

22x19x21(55x48x53) UWKB

GAW180HEA†** 180A 26.8V 50%@180A100%@110A 50-180A 3KW;

25HONDAGX340

236(107)

28x24x22(70x60x56) UWKB

DIESEL

SDW225SSA1* 225A 15-28C28CC 100%@200A 50-225A 6KW;

50/25KUBOTA

Z482675(306)

45x26x32(114x66x81)

TRLR10W, TRLRMP(XF), WKT225A

DLW300ESA1* 300A 31CC 100%@280A 35-300A 9.6KW; 80/40

KUBOTAD722

849(385)

51x27x33(130x69x84)

TRLR10W TRLRMP(XF)

DLW330X2*

340A Single200A Duel

312x26.6CC

100%@280A2x165

70-340A2x35-200A

10.5KW; 87/44

KUBOTAD902

893(405)

51x27x33(130x69x84)

TRLR10WTRLRMP(XF)

DLW400ESA4*

400A Single200A Duel

342x27CC

100%@350A2x175

70-400A2x35-200A

12KW; 100/50

KUBOTAD902

1,145(519)

61x29x35(154x72x89) TRLRMP(XF)

DAW500SA4* 500A 22-40CV38CC 100%@350A 40-500A 3KW;

25KUBOTAD1803

1,303(591)

53x32x45(133x80x113) TRLRMP(XF)

† Optional battery available* TIER 4f** Not currently available for sale or use in Canada

Optional trailer

14

TRA

ILERS

TRAILERS multiquip.com

MODEL GROSS VEHICLE WEIGHT RATING

LBS.

GROSS AXLE

WEIGHT RATING

LBS.

TIRE SIZE

TIRE LOAD RATING

LBS.

LXWXH (IN)

FUEL TANK CAPACITY

GAL.

WEIGHT DRY

(WET) LBS.

TRLR10W 2,000 2.000 EA ST175/80D 13 LR-C 1,360 EA 91.5x52x18.75 – 322 (-)

TRLRMP 2,000 2.000 EA ST175/80D 13 LR-C 1,360 EA 98.6x55.5x22 – 383 (-)

TRLRMPXF 2,000 2.000 EA ST175/80D 13 LR-C 1,360 EA 98.6x55.5x22 28 513 (713)

TRLR25US 2,720 3.500 EA ST175/80D 13 LR-C 1,360 EA 104.5x56x21 – 406 (-)

TRLR45 7,000 3,500 EA ST205/75D 14 LR-C 1,760 EA 148x65.25x27 – 1056 (-)

TRLR50 2,700 3,500 EA ST175/80D 13 LR-C 1,360 EA 128x55x22.75 – 335 (-)

TRLR50XF 2,700 3,500 EA ST175/80D 13 LR-C 1,360 EA 128x55x22.75 41 510 (801)

TRLR70 6,000 3,500 EA ST205/75D 14 LR-C 1,760 EA 145.9x68x22 – 575 (-)

TRLR70US 7,000 3,500 EA ST205/75D 15 LR-C 1,820 EA 164.4x72.5x23.5 – 980 (-)

TRLR70XF 6,000 3,500 EA ST205/75D 14 LR-C 1,760 EA 145.9x68x22 52 765

(1,134)

TRLR75XF 7,000 3,500 EA ST205/75D 15 LR-C 1,820 EA 142.5x69.5x28.5 100 876

(1586)

TRLR125US 10,000 5,000 EA ST225/75D 15 LR-D 2,540 EA 181x79.5x24.7 – 1,719 (-)

TRLR150 10,000 6,000 EA ST235/80R 16 LR-E 3,500 EA 206.8x84.5x27.7 – 1,650

(749)

TRLR150US 11,000 6,000 EA ST235/80R 16 LR-E 3,500 EA 184x83x24 – 1,772 (-)

TRLR180XF 12,000 7,000 EA ST235/80R 16 LR-E 3,500 EA 204x86.5x26.3 210 2,580

(4,119)

TRLR220XF 13,500 7,000 EA ST235/80R 16 LR-E 3,500 EA 209x87.4x26.4 300 3,390

(5,520)

TRLR325XF 18,000 10,000 EA

ST235/75R 17.5 LR-H 6,005 EA 234x96x33 300 3,860

(5,990)

TRLR400XF3DA 20,000 7,000 EAST235/ 80R16 LR-E

3,500 EA 264x94x27.4 350 4,280 (1,943)

TRLR800* 50,000 20,000 EA

235/75R 17.5 LR-J

5,675 (DUAL) 414x102x47 1,250 9,740

(13,538)

MQ POWER HEAVY DUTY TRAILERSFeatures• Heavy duty welded steel frame construction• Powder coat paint process including frame, channel,

actuator and fenders• D.O.T. approved tail lamps, stop lamps, turn signal lamps

and side marker lamps• Surge hydraulic or electric-actuated drum brakes (all axles)

*1250 sub base tank

15

GLO

BU

G LIG

HTIN

G

LIGHTING SOLUTIONS

GLOBUG BALLOON LIGHTSFeatures• Runs on 120V Power• Easy maneuverability and transport• 360-degree illumination• Glare-free lighting• Decorative balloons available

for advertising and promotion• Electronic ballast for

easy starting• LED glare-Free

lighting systems

MODEL TYPE LAMP WEIGHT LBS (KG)

GBC* CART 1KW METAL HALIDE 126 (57)

GBW WITH PENTAPOD STAND 1KW METAL HALIDE 56 (26)

GBS EQUIP. MOUNT 1KW METAL HALIDE 34 (16)

GBP LAMP ONLY 1KW METAL HALIDE 22 (10)

GB12BW WITH TRIPOD STAND 400W METAL HALIDE 30 (14)

GB12BS EQUIP. MOUNT 400W METAL HALIDE 30 (14)

GB12BP LAMP ONLY 400W METAL HALIDE 13 (6)

GB3LED LED LAMP W/TRIPOD 300W LED 27 (59)

GB3LEDB LED LAMP ONLY 300W LED 18 (40)

GB8LED LED LAMP W/ PENTAPOD 800W LED 48 (22)

GB8LEDB LED LAMP ONLY 800W LED 25 (11)

GBC8LED CART 800W LED 126 (57)


* Generator not included with GBC cart model

** Not currently available for sale or use in Canada

Optional generator

GLOBUG 4-SPOT LIGHT TOWERSFeatures• Ultimate compact cart design• Metal Halide (MH) and LED lamp models• 3-Stage mast (MH) and 4-stage mast LED• Operates from 120V house or generator power• MH mast raises to 13.7' - LED mast to 17.1'

MODEL VOLTAGE AMPS BULB WATTAGE

LUMENS BULB TYPE WEIGHTLBS (KG)

GB43SC** 120V 18.6 4 x 400W 142,000 METAL HALIDE 364 (165)

GB43LED** 120V 11 4 x 300W 152,000 LED 316 (165)


GB43SC shownwith optionalgenerator

16

LIGH

T TOW

ERS

LIGHTING SOLUTIONS multiquip.com

LIGHT TOWERSFeatures• Mobile lighting and power solutions• Heavy strength trailers for safety• Four metal halide lamps• 440,000 Lumens output performance• Rugged mast design with 360° rotation• Withstands 65 MPH winds• Standard and vertical mast models• Multiple electrical receptacle packages• EPA / CARB compliant engines• Quick Pin Lamp Connectors• Full Fluid Containment Tub Design

Standard Mobile Light Towers

MODEL FEATURE CONTINUOUS OUTPUT

VOLTAGE AMPS

FREQUENCY/PHASE


LT6K LT/GEN 6kW 120/24050/25 60HZ 1Ø KOHLER

KDW1003 1,492 (677)

LT6K5 LT/GEN 6kW 240/25 50Hz 1Ø KOHLERKDW1003 1,492 (677)

LT6KVLT/GEN

VERTICAL MAST

6kW 120/24050/25 60HZ 1Ø KOHLER

KDW1003 1,510 (685)

LT6K5VLT/GEN

VERTICAL MAST

6kW 120/24050/25 50Hz 1Ø KOHLER

KDW1003 1,510 (685)

GloBug Light Tower Diffuser Systems

MODEL FEATURE LUMENS VOLTAGE LAMPS

WATTS WEIGHT LBS (KG)

GB2000 DIFFUSED LIGHTING SOURCE 220,000 238-268 2,000 31 (68.2)

GB4000 DIFFUSED LIGHTING SOURCE 440,000 238-268 4,000 40 (88)


Multiquip Light Tower shown with GB2000 installed.

Light Tower shown with GB4000 installed.

LT6K shown

17

LIGH

T TOW

ERS

LIGHTING SOLUTIONS

MODULAR LIGHT TOWERSFeatures• Industrial lighting and power solutions• Rugged mast design with 360° rotation• Withstands 65 MPH winds• Mast extends 30'• Multiple electrical receptacle packages• Quick Pin Lamp Connectors• Industrial DOT Certified Trailers• Detachable Generator & Welder Models• Heavy-duty 1kW Lamp Design Models• Power Cord Collection Tube

MLTSDW7 shown


Modular Mobile Light Towers/SDW225SSA1 Welder/Generator

MLTSDW7MODULAR

LT/WELDER/GEN

225A 28V 120/24050/25

KUBOTA Z482 1,744 (791)

MODEL FEATURE MAX OUTPUT RATEDVOLTAGE

VOLTAGE AMPS


MLTDA72 shown

* Canada only

18

Modular Mobile Light Towers

MODEL FEATURE CONTINUOUS OUTPUT

VOLTAGE AMPS

FREQUENCY/PHASE


MLTCOMPLETE MODULAR

LIGHT TOWER6kW 120/240

50/25 60HZ 1Ø KOHLERKDW1003 1,492 (677)

MLTDAC7* MODULAR LT/GEN 6kW 120/240

50/25 60HZ 1Ø KUBOTA Z482 1,644 (745)

MLTDA72 MODULAR LT/GEN 6kW 120/240

50/25 60HZ 1Ø KUBOTA Z482 1,644 (745)

MLTDA72GH MODULAR LT/GEN 6kW 120/240

50/25 60HZ 1Ø KUBOTA Z482 1,644 (745)

ELECTR

IC SU

BM

ERSIB

LE PUM

PS

DEWATERING EQUIPMENT multiquip.com

SUBMERSIBLE CLEAN WATER PUMPSFeatures• 1.25" to 6" diameter discharge• Selected models UL and CUL listed• Compact and streamlined design with

thermal overload protection• Single-phase and three-phase motors available• Double oil-filled seal provides positive

lubrication (selected models)

Technical specificationsMODEL DISCHARGE

IN (MM)GPM(LPM)

TOTAL HEAD FT (M)

VOLTAGE PHASE

HP (KW)1

DIAMETER IN (MM)

WEIGHT LBS (KG)

YELLSUB 1.25 (38) 33 (125) 15 (4.6) 115 1Ø 0.25 (0.185) 5.3 (136) 6(2.72)

SS233 2 (50) 60 (227) 20 (6.1) 115 1Ø 0.5 (0.37) 8.1 (206) 15.5(7)

ST2038P 2 (50) 60 (227) 38 (11.5) 115 1Ø 1.0 (0.75) 7.7 (196) 31(14)

ST2037 2 (50) 73 (276) 37 (11.3) 115 1Ø 1.0 (0.75) 7.4 (188) 31(14)

ST2037F # 2 (50) 73 (276) 37 (11.3) 115 1Ø 1.0 (0.75) 7.4 (188) 31(14)

ST2047 2 (50) 87 (329) 47 (14.3) 115 1Ø 1.0 (0.74) 7.4 (188) 33(15)

ST3020BCUL 3 (75) 170 (644) 72 (22) 230 1Ø 2.0 (1.5) 6.7 (170) 67(30)

ST3050D*† 3 (75) 264 (999) 86 (26) 230/460 3Ø 5.0 (3.7) 10.2 (259) 120(54)

ST41230*† 4 (101) 423 (1,601) 138 (42) 230 3Ø 10 (7.4) 12.5 (318) 205(93)

ST41460*† 4 (101) 423 (1,601) 138 (42) 460 3Ø 10 (7.4) 12.5 (318) 205(93)

ST61230*† 6 (152) 674 (2,423) 105 (32) 230 3Ø 15 (11.1) 14 (356) 301(136)

ST61460*† 6 (152) 674 (2,423) 105 (32) 460 3Ø 15 (11.1) 14 (356) 301(136)

MODEL DISCHARGE IN (MM)

GPM(LPM)

MAX HEAD FT (M)

VOLTAGE PHASE

HP (KW)1

DIAMETER IN (MM)

WEIGHT LBS (KG)

PX400† 2 (51) 72 (273) 34 (10.3) 115 1Ø 0.5 (0.37) 10 (254) 25 (11)

ST2040T 2 (51) 79 (299) 40 (12.2) 115 1Ø 1.0 (0.75) 10.3 (267) 34 (15.4)

ST2040TF # 2 (51) 79 (299) 40 (12.2) 115 1Ø 1.0 (0.75) 10.3 (267) 34 (15.4)

ST2010TCUL 2 (51) 95 (360) 45 (13.7) 115 1Ø 1.0 (0.75) 10.3 (267) 77 (35)



# with integrated Float Switch

1 See page 46 for details.* Three-phase—specify voltage when ordering Models ST3050D, ST41230, ST41460, ST61230, ST1460 require a Control Box when ordering

† Not currently available for sale or use in Canada

† Not currently available for sale or use in Canada

SUBMERSIBLE TRASH PUMPSFeatures• Compact design with thermal-overload protection• Handles solids up to 1" in diameter• PX-400 designed with plastic/stainless

steel housing

19

ENG

INE C

ENTR

IFUG

AL PU

MPS

CENTRIFUGAL PUMPSFeatures• Dewatering pumps for a variety of

clear water applications • Industrial die cast aluminum

pump-end design• Compact, portable • Dependable Honda gasoline engines• Adjustable discharge port • Sturdy wrap-around frame

HIGH-PRESSURE CENTRIFUGAL PUMPSFeatures• Honda-powered with low-oil alert• High head producing• High pressure producing• Unique 3 discharge port manifold• Excellent for fire emergencies,

portable irrigation and equipment cleaning

DEWATERING EQUIPMENT



MODEL SUCTION X DISCHARGE

IN (MM)

GPM(LPM)

MAX HEAD FT(M)

ENGINE HP (KW)1

WEIGHT LBS (KG)

QP2H 2x2 (51x51) 158 (600) 115 (35) HONDA 3.5 (2.6) 53 (24)

QP303H 3x3 (76x76) 245 (931) 98 (30) HONDA 4.8 (3.6) 77 (35)

QP402H 4x4 (101x101) 425 (1,615) 100 (30) HONDA 7.9 (5.9) 145 (65)

MODEL SUCTION X DISCHARGE

IN (MM)

GPM(LPM)

MAX HEAD FT (M)

MAX PSI

ENGINE HP (KW)1

WEIGHT LBS (KG)

QP205SH 2x1.5/1/1(51x38/25/25) 106 (401) 230 (70) 100 HONDA 4.8 (3.6) 64 (29)

QPT205SLT 2x1.5/1/1(51x38/25/25) 126 (479) 312 (95) 135 HONDA 7.9 (5.9) 99 (45)

QPT305SLT 3x1.5/1/1(76x38/25/25) 145 (550) 328 (100) 142 HONDA 10.7 (8.0) 110 (50)

QPT405SLT 4x3/3/4(101/76/76/101) 210 (795) 377 (115) 163 HONDA 10.7 (8.0) 305 (137)



20

ENG

INE TR

ASH

PUM

PS


TRASH PUMPSFeatures• Rugged die-cast pump casings• 2", 3" & 4" suction/discharge• Ductile iron impellers• Silicon/carbide mechanical seals• Easy access clean-out covers• 1" protective roll frame• Gasoline & diesel engine models• Handles solids up to 2" diameter• Optional wheel kits available



MODEL SUCTION & DISCHARGE IN (MM)

GPM(LPM)

MAX HEAD FT (M)

MAX SOLIDS IN (MM)

ENGINE HP (KW)1

WEIGHT LBS (KG)

GASOLINE ENGINES

QP2TH 2x2 (51x51) 211 (800) 98 (30) 1.0 (25.4) HONDA 4.8 (3.6) 96 (43.5)

QP3TH 3x3 (76x76) 396 (1,500) 95 (29) 1.5 (38.1) HONDA 7.9 (5.9) 142 (64)

QP4TH 4x4 (100x100) 555 (2,100) 92 (28) 2.0 (50.8) HONDA 10.7 (8.0) 216 (98)

DIESEL ENGINES

QP2TZ 2x2 (51x51) 198 (750) 95 (29) 1.0 (25.4) SUBARU-HATZ 4.6 (3.4) 131 (60)

QP3TZ 3x3 (76x76) 383 (1,450) 90 (27) 1.5 (38.1) SUBARU-HATZ 6.8 (5.1) 163 (74)

QP4TZ 4x4 (100x100) 526 (2,000) 85 (26) 2.0 (50.8) SUBARU-HATZ 9.9 (7.4) 265 (120)

21

TRASH PUMP - QP3TiFeatures• AUTO unattended operations• Float Switch Operations• Electric Start - AUTO Choke• Controlled Discharge Rates• Wheel Kit included• Float Switches included


Technical specificationsMODEL SUCTION & DISCHARGE

IN (MM)GPM(LPM)

MAX HEAD FT (M)

MAX SOLIDS IN (MM)

ENGINE HP (KW)1

WEIGHT LBS (KG)

QP3Ti 3x3 (76x76) 396 (1,500) 95 (29) 1.5 (38.1) HONDA 7.9 (5.9) 142 (64)

ENG

INE TR

ASH

PUM

PS

DEWATERING EQUIPMENT22

TRASH PUMPS – 6" Skid & Trailer Mount

Features• Powerful wet priming system• 6" suction/discharge• Passes 3" solids• Ductile iron impellers• Multi-position discharge• LED control boxes• Strong No. 30 grey iron pump housing• Silicon/carbide mechanical seal• Multiple DOT approved trailer packages

Technical specificationsMODEL SUCTION &

DISCHARGE INGPM MAX

HEAD FTMAX SOLIDS

INENGINE WEIGHT

LBS (KG)

MQ62TDD* 6x6 1,083 100 3.0 DEUTZ 1,560 (707)

MQ600HTB 6x6 1,600 150 3.0 HATZ 2,850 (1,293)1 See page 46 for details.* EXPORT Only

DIAPHRAGM PUMPSFeatures• Ideal for slow seepage, sludge and

heavy debris laden fluid applications• Quick, easy priming• Wheel Kit included

MODEL SUCTION x DISCHARGE IN (MM)

GPM(LPM)

ENGINE HP (KW)1

WEIGHT LBS (KG)

MQD2H 2x2 (51x51) 50 (189) HONDA 3.5 (2.6) 125 (57)

MQD3H 3x3 (76x76) 90 (342) HONDA 3.5 (2.6) 175 (79)



TRASH PUMPWHEEL KITS and TRAILERS

Optional wheel kits are available for almost every Multiquip trash pump. Easily installed, they simplify mobility on the job site.

Industrial towable trailers with fuel cells are available for QP4TZ, MQ62TDD, and MQ600TD80 models.


PUM

P AC

CESSO

RIES

PUMPHOSES

Multiquip offers a complete line of Suction and Discharge Hoses, in sizes from 1-1/2" to 8" with standard thread or quick-disconnect couplings.

CONTROL BOXESFOR SUB PUMPS

Multiquip offers rugged Control Boxes, for sub pump operations and electrical protection. Pumps requiring Control Boxes: ST3050D, ST41230, ST41460, ST61230 and ST61460.

FLOAT SWITCHESFOR SUB PUMPS

Multiquip offers industrial Float Switches, to support dewatering operations. Single and Dual Float Switches available.

PUMP ACCESSORIESFeatures• Full line of suction hoses• Full line of discharge hoses• Float switches• Control boxes for submersible pumps• Wheel kits for pipe frame pumps• DOT approved industrial trailers for trash pumps

23

WA

TER TR

AILER

WATER TRAILER

WATER TRAILERSFeatures• High strength 500 gallon polyethylene water tank• Vented tank feed cap• Industrial DOT Certified Trailer• Oversized hose bin• Self-priming Multiquip QP2H Pump• 158 GPM and 115' head pump performance• Simple 2 control handle manifold system• Left and right front discharge• Rear spray bar system• Discharge manifold equipped with 1.5", 2" and standard

garden hose connections• Fire hydrant fill adapter

Technical specificationsMODEL CAPACITY

GALPUMP GPM

MAX HEAD FT

ENGINE TRAILER WEIGHT (DRY) LBS

WT5C 500 158 115 HONDAGX-120

Dual AxleDOT Approved 1,428

WTE5C 500 158 115 HONDAGX-120

Dot Approved Electric Brakes 1,428

ACCESSORIES - HOSES

MODEL HOSETYPE

SIZEIN

LENGTHFT

COUPLER PSICAPACITY

HS220 SUCTION 2 20 NPTTHREAD 75

HSQ220 SUCTION 2 20 QUICKDISCONNECT 75

HSQ225 SUCTION 2 25 QUICKDISCONNECT 75

HD225 DISCHARGE 2 50 NPTTHREAD 75

HDQ225 DISCHARGE 2 20 QUICKDISCONNECT 75

HDFNST FIRE HYDR. DISCHARGE 1.5 25 QUICK

DISCONNECT 200

24

CONCRETE/MASONRY multiquip.com

CO

NC

RETE/M

ASO

NR

Y PU

MPS

MAYCO MECHANICAL BALL VALVE PUMPSFeatures• Powerful, 50-HP Zenith Gasoline or 30-HP Deutz diesel engines• One-piece forged, heat-treated crankshaft• 3-speed volume control allows

the operator to vary the flow• Fully-enclosed “splash” lubrication

box provides clean, positive piston lubrication

• Ball and valve seat

MAYCO HYDRAULIC SWING TUBE PUMPSFeatures• Versatile–shotcrete, masonry block fill, slabs, footings• Designed to pump larger aggregate up to 1-1/2"• Variable volume output from 0 to 60 cu. yds. per hour• Up to 1,100 psi piston face pressure• Digital diagnostic control panel• Available with wireless

remote control

Technical specificationsMODEL MAX

AGGREGATEIN (MM)

PUMPING RATE

YDS3/HR(M3/HR)

VERTICAL PUMPING HEIGHT FT (M)

HORIZONTAL PUMPING DISTANCE

FT (M)

ENGINE HP(KW)1

WEIGHT LBS (KG)

C30HDG 1/2 (10-12) 25 (19) 150 (46) 500 (152) ZENITH 50 (37.2) 2,910(1,320)

C30HDZ 1/2 (10-12) 25 (19) 150 (46) 500 (152) DEUTZ 30 (22.3) 2,910(1,320)

Technical specificationsMODEL MAX

AGGREGATEIN (MM)

PUMPING RATE

YDS3/HR(M3/HR)

VERTICAL PUMPING HEIGHT FT (M)

HORIZONTAL PUMPING DISTANCE

FT (M)

ENGINE HP (KW)1

WEIGHT WITHOUT

FUEL LBS (KG)

LS300P 1.5 (38) 30 (23 ) 200 (61) 800 (243) DEUTZTURBO

64.3 (47.9) 3,750 (1701)

LS400 1.5 (38) 40 (30) 300 (91) 1,000 (305) DEUTZTURBO

77 (57.4) 4,760 (2,159)

LS500 1.5 (38) 50 (38) 300 (91) 1,000 (305) DEUTZTURBO

77 (57.4) 4,760 (2,159)

LS600P 1.5 (38) 60 (46) 300 (91) 1,000 (305) PERKIN

TURBO108

(80.5) 6,200 (2812)



25

CO

NC

RETE M

IXER

S

CONCRETE/MASONRY

TOWABLE CONCRETE MIXERS Features• Steel drum or polyethylene

versions available• Variety of power sources• Leaf springs standard on 6- and

9- and 12-cu. ft. mixers• Oversized dump wheel – easier

to discharge material• 13" tires for safe towing• Steel mixers available with 4-,

6- or 9-cu. ft. drums• Polyethylene models available with

6-, 9- or 12-cu. ft. drums; simplify cleanup while resisting rust and dents

STEEL MODEL

POLY MODEL

CAPACITY CU FT (L)

DRUM OPENING IN (MM)

ENGINE HP (KW)1

MC44SE – 4 (113) 17.5 (445) 115V 0.5 (.37)

MC44SH – 4 (113) 17.5 (445) HONDA 3.5 (2.6)

MC64SE MC64PE 6 (169) 19 (483) 115/230V 1.5 (1.1)

MC64SH5 MC64PH5 6 (169) 19 (483) HONDA 4.8 (3.6)

MC64SH8 MC64PH8 6 (169) 19 (483) HONDA 7.9 (5.8)

MC94SE MC94PE 9 (254) 21 (533) 115/230V 1.5 (1.1)

MC94SH8 MC94PH8MC12PH

9 (254) 12 (339)

21 (533)20 (508)

HONDAHONDA

7.9 (5.8)10.7 (7.9)


Steel Drum

Polyethylene Drum


Polyethylene drum mixers clean out easily and quickly! These photos show a batch of concrete that was left to dry for more than 24 hours. With a few taps of a mallet, virtually all the dried material falls out of the mixer. It’s truly that simple to clean!

POLYETHYLENE DRUMS

26


CO

NC

RETE M

IXER

S

Mobile

PORTABLE CONCRETE MIXERS Features• Mix-N-Go is perfect for homeowners,

small jobs and multiple work sites

MUDTUBS Features• Capacity 10 cf. (.28 m3)• Highly durable polyethylene construction

resistant to cold weather and UV• Our tough Easy Clean tubs

can be cleaned in minutes with tap of rubber pallet

• Resists dents, rust or cracks• Mud Tub features 4" x 4"

rectangular steel feet• Mud Tub W features heavy-duty,

high impact resistance 8 inch casters• One-year warranty• Approximate 1,000 lb. capacity

Technical specificationsMODEL DRUM

CONSTRUCTIONBATCH CAPACITY

CU FT (L)DRUM OPENING

IN (MM)ENGINE

MC3SEA STEEL 3 (85) 15.5 (394) 3/4-HP, 115V, 1Ø ELECTRIC

MC3PEA POLY 3 (85) 15.5 (394) 3/4-HP, 115V, 1Ø ELECTRIC

Technical specificationsMODEL TUB TYPE DIMENSIONS

IN (CM)WEIGHTLBS (KG)

MUDTUB STATIONARYL 56.75 (1,141) W 28.25 (717.5) H 22.75 (577.8)

54 (24.4)

MUDTUBW MOBILEL 56.75 (1141)

W 28.25 (717.5) H 28.25 (717.5)

81 (36.7)

MU

DTU

BS

27

PLASTER

/MO

RTA

R M

IXER

S

WHITEMAN TOWABLE PLASTER/MORTAR MIXERSFeatures• Hydraulic-drive options on 12-cu. ft. models• Available in 4.5, 6.3, 7-, 9- and 12-cu. ft. models • Heavy-duty safety grate with built-in bag cutter• 13" tires for safe towing• Forklift pockets• Steel models offer durable drum up to 3/16" thick • Polyethylene drums simplify cleanup while resisting rust and dents

Technical specificationsSTEEL MODEL

POLY MODEL

CAPACITY CU FT (L)

ENGINE HP (KW)1

DRIVE

WM45H* – 4.5 (113) HONDA 3.5 (113) V-BELT/GEAR

WM63 – 6.3 (178) HONDA 7.9 (5.8) V-BELT/GEAR

WM70SE WM70PE 7 (198.2) 115/230V,1Ø 1.5 (1.1) V-BELT/GEAR

WM70SH5 WM70PH5 7 (198.2) HONDA 4.8 (3.6) V-BELT/GEAR


WM90SE WM90PE 9 (254.9) 230V,1Ø 3.0 (2.2) V-BELT/GEAR


WM120SHHD WM120PHD 12 (339.8) HONDA 11.7 (8.7) HYDRAULIC

Polyethylene Drum

Steel Drum

*Wheelbarrow design 1 See page 46 for details.

CONCRETE/MASONRY28


PLASTER

/MO

RTA

R M

IXER

SESSICK TOWABLE PLASTER/MORTAR MIXERSFeatures• Full range of mixers designed for

professional masonry contractors• Towable mixers with 7, 9 and

12-cubic foot capacities• Paddle shaft seals require

no greasing• Smooth towing whether on

the job or on the highway

STEEL MODEL

CAPACITY CU FT (L)

ENGINE HP (KW)1

DRIVE

EM70SE 7 (198.2) 115/230V 1.5 (1.1) V-BELT/GEAR

EM70SH5 7 (198.2) HONDA 4.8 (3.6) V-BELT/GEAR


EM90SE 9 (254.9) 230V, 1Ø 3.0 (2.2) V-BELT/GEAR


EM120SME51 12 (339.8) 230V, 1Ø 5.0 (3.7) MECHANICAL

EM120SME53 12 (339.8) 230/460V, 3Ø 5.0 (3.7) MECHANICAL

EM120SMH11 12 (339.8) HONDA 10.7 (7.9) MECHANICAL

EM120HYD 12 (339.8) HONDA 11.7 (8.7) HYDRAULIC


Steel Drum


ESSICK PRO12 MIXERSFeatures• PRO12 model offers stationary design

for silo applications• Easy loading – operator loads at

waist height• Hydraulic drive handles tough mix

designs – including 1-inch aggregate• Powerful Honda engine equipped

recoil and electric start• Forklift pockets standard on all models

STATIONARY MODELS

MODEL CAPACITY CU FT ENGINE HP (KW)1 DRIVE

PRO12 12 HONDA GX390 11.7 (8.7) HYDRAULIC

PRO12E51 12 ELECTRIC 5 HP 1Ø 230V HYDRAULIC

PRO12E53 12 ELECTRIC 5 HP 3Ø 230V HYDRAULIC

PRO12E53-460V 12 ELECTRIC 5 HP 3Ø 460V HYDRAULIC



29

REBA

R B

END

ERS &

CU

TTERS

REBAR BENDERSFeatures• Compact design for use on the

jobsite or in the shop• Control knob selects precise

bending angle • Standard with foot control switch• A full variety of rollers and collars

are included to accommodate all rebar sizes up to 1" diameter

MODEL BENDING CAPACITY IN (MM)

BENDING SPEED SECONDS

BENDING RANGE

ELECTRIC MOTOR


MB25A* 1.0 (25.4) 5 SECONDS FOR 1800 0-1800 115V, 60HZ 227 (103)


REBAR CUTTERSFeatures• HBC features 1" maximum capacity;

powered by 115V electric motor• Compact and lightweight for

easy portability• Replaceable cutting blocks

with multiple cutting edges• Built-in hydraulic pump with

magnetic particle filtering

MODEL CUTTING DIAMETER

IN (MM)

CUTTING SPEED SECONDS

RATED POWER AMPS

ELECTRIC MOTOR

WEIGHT LBS (KG)

115V MODELS

HBC19B* 3/4 (19) 2.5 9 115V, 60HZ,1Ø 28 (12.8)

HBC25B* 1 (25) 3.5 12 115V, 60HZ,1Ø 48 (22)


CONCRETE/MASONRY30

* Not currently available for sale or use in Canada


MODEL WIDTH IN (MM)

LENGTHIN (MM)

MAX LOAD

LBS (KG)

CAPACITY CU. FT (CU.M)

STARTING SYSTEM

FUEL CAPACITY

GAL (L)

HP (KW)1

SPEEDMPH(KPH)

WBH16 44(1,171.6)

103(2,641.6)

2,500(1,134)

16(3.5) RECOIL 4.8 (18.5) 11.7 (8.7) 7.25

(11.66)WBH16F* 44

(1,171.6)103

(2,641.6)2,500

(1,134)16

(3.5) RECOIL 4.8 (18.5) 11.7 (8.7) 7.25 (11.66)

WBH16E 44(1,171.6)

103(2,641.6)

2,500(1,134)

16(3.5)

RECOIL &ELECTRIC 4.8 (18.5) 11.7 (8.7) 7.25

(11.66)WBH16EF* 44

(1,171.6)103

(2,641.6)2,500

(1,134)16

(3.5)RECOIL &ELECTRIC 4.8 (18.5) 11.7 (8.7) 7.25

(11.66)WB-H16EAWD

44(1,171.6)

103(2,641.6)

2,500(1,134)

16(3.5)

RECOIL &ELECTRIC 4.8 (18.5) 18.0

(10.4)7.25

(11.66)WB-H16EAWDF*

44(1,171.6)

103(2,641.6)

2,500(1,134)

16(3.5)


(10.4)7.25

(11.66)

WBH21EF* 44(1,171.6)

103(2,641.6)

3,200(1,451)

21(0.59)


(10.4)7.25

(11.66)


POW

ER B

UG

GIES

WHITEMAN POWER BUGGIESFeatures• Heavy-duty frame with 6" dump height• 8%-10% greater dumping reach – 5% greater

dumping angle than competitors’• Easy Clean™ Poly Tub• Available with optional all-wheel drive


1 See page 46 for details.* Foam-filled tires

31

CO

NC

RETE V

IBR

ATO

RS

MIKASA MGX VIBRATORSFeatures• Light weight and powerful 120V motor• Ideal for footings and block walls• Vibration dampening handle design• Two shaft and four head sizes available

FLEX-SHAFT VIBRATORSFeatures• Gasoline-powered backpack and

stationary drive motor or electric handheld motors available

• Flexible shafts from 2 ft. to 21 ft. long • UL compliance testing to USA and Canadian

standards on all electric motors• Ideal for footings and block walls• Six heads from 7/8" to 2-5/8" available

COMPLETE ASSEMBLY (MOTOR, HEAD, SHAFT)

MODEL HEAD DIAMETER

IN (MM)

OVERALL LENGTH FT (M)

AMPLITUDEIN (MM)

FREQUENCYVPM (HZ)

SET WEIGHT LBS (KG)

MGX12325* 0.91 (23) 9.5 (2.9) 0.047 (1.2) 12,000-15,500(200-258) 11.5 (5.2)

MGX12810* 1.1 (28) 4.71 (1.4) 0.07 (1.8) 12,000-15,500(200-258) 9.5 (4.3)

MGX12825* 1.1 (28) 9.5 (2.9) 0.07 (1.8) 12,000-15,500(200-258) 11.5 (5.2)

MGX13225* 1.25 (32) 9.5 (2.9) 0.075 (1.9) 12,000-15,500(200-258) 9.5 (4.3)

MGX13810* 1.5 (38) 4.71 (1.4) 0.079 (2.0) 12,000-15,500(200-258) 11.5 (5.2)

MGX13825* 1.5 (38) 9.5 (2.9) 0.079 (2.0) 12,000-15,500(200-258) 9.5 (4.3)


HAND-HELD ELECTRIC MOTORS

MODEL VOLTAGE AMPS RPM WEIGHT LBS (KG)

CV1A 120V 10 16,000 11 (5)

CV2A 120V 15 18,000 13 (6)

CV2B 240V 7.5 18,000 13 (6)

CV3A 120V 20 19,250 14 (6)

GASOLINE DRIVE

MODEL ENGINE HP (KW)1 MOTOR TYPE WEIGHT LBS (KG)

BP25H HONDA 2.1 (1.6) STATIONARY/SWIVEL 24 (11)

G55H HONDA 4.8 (3.6) BACKPACK 74 (33)

HEADS AND SHAFTS

STEEL HEAD DIAMETERS IN (MM) FLEXIBLE SHAFT LENGTHS FT (M)

7/8 (22), 1-1/16 (27), 1-3/8 (35), 1-11/16 (43), 2-1/8 (54), 2-5/8 (67) 2 (.6), 7 (2.1), 10 (3), 12 (3.7), 14 (4.3), 21 (6.4)



CONCRETE/MASONRY32



CO

NC

RETE V

IBR

ATO

RS

MIKASA MICON HIGH-CYCLE CONCRETE VIBRATORSFeatures• Patented Micro Computer Controller protects system against

shorts or fluctuation in voltage• Perfect for “zero” slump concrete applications• Constantly monitors the head to provide appropriate vibration• Maintains optimum frequency under virtually any

slump condition• Extended hose lengths available

MICON VIBRATORSMODEL DIAMETER

IN (MM)VPM AMPLITUDE

IN (MM)HOSE

LENGTH FT (M)

CABLE LENGTH FT (M)

AMPS VOLTAGE CYCLE(HZ)

WEIGHT LBS (KG)

VH32A4M 1.25 (32) 12,000 0.07 (1.7) 13.1 (4) 65 (20) 3 58 400 28 (12.7)

VH42A4M 1.67 (42) 12,000 0.08 (2.0) 13.1 (4) 65 (20) 5 58 400 31 (14)

VH52A4M 2.0 (52) 12,000 0.09 (2.3) 13.1 (4) 65 (20) 7 58 400 34 (15.4)

VH32A6M 1.25 (32) 12,000 0.07 (1.7) 19.6 (6) 65 (20) 3 58 400 33 (15)

VH42A6M 1.67 (43) 12,000 0.08 (2.0) 19.6 (6) 65 (20) 5 58 400 36 (16)

VH52A6M 2.0 (52) 12,000 0.09 (2.3) 19.6 (6) 65 (20) 7 58 400 39 (18)



*Special order only

MICON CONTROLLERS

ELECTRICAL REQUIREMENTS ELECTRICAL OUTPUT

MODEL RECEPTACLES VOLTAGE PHASE AMPS CYCLE(HZ)

VOLTAGE PHASE AMPS CYCLE(HZ)

VC1A 1 120V AC 1 10 60 58 3 7 400

VC2B 1 120V AC 1 20 60 58 3 14 400

33

CO

NC

RETE V

IBR

ATO

RS

MIKASA FXA HIGH-CYCLE CONCRETE VIBRATORSFeatures• Ideal for medium- to low-slump applications• Motor-in-head design minimizes VMP loss under load• Extended hose lengths available in 10' and 20' increments• Cable extentions available in 50' and 100' increments

MODEL HEAD DIAIN(MM)

HEAD LENGTHIN (MM)

HOSE LENGTHFT (M)

CORD LENGTH FT (M)

AMPS CENTRIFUGAL FORCE

LBS (KG)

VPM WEIGHTLBS (KG)

FXA50A4 2 (51) 16-1/2 (419) 13.1 (4) 33 (10) 2 714 (324) 10,800 36 (16)

FXA50A6 2 (51) 16-1/2 (419) 20 (6.1) 33 (10) 2 714 (324) 10,800 55 (25)

FXA60A4 2-3/8 (60) 19-1/4 (260) 13.1 (4) 33 (10) 4.5 1,600 (726) 10,800 42 (19)

FXA60A6 2-3/8 (60) 19-1/4 (260) 20 (6.1) 33 (10) 4.5 1,600 (726) 10,800 65 (29)


HIGH-CYCLE GENERATORS (FOR FXA VIBRATORS)

Features• Powers up to three high-cycle vibrators simultaneously• 5kVA, 230-volt, 180-cycle output• 3,600 watts continuous 60-cycle, single-phase power• Reliable Honda engine with recoil start, low-oil shutdown and idle control• Lifting bail for easy moving• All receptacles GFCI protected

MODEL MAX/CONT@180HZ

OUTPUT@180HZ

MAX/CONT@60HZ

OUTPUT@60HZ

ENGINE HP(KW)1

WEIGHT LBS (KG)

GDP5HA* 5KVA 240V, 12.5A 4KW/3.6KW 120/240V,60HZ,30/15A HONDA 9.5 (7.1) 235 (107)



CONCRETE/MASONRY34



SCR

EEDS

WHITEMAN SUPERSCREEDSFeatures• For flatwork, strikes off over 10,000 sq. ft. per hour with

exceptional F numbers• Ideal for highway rehabilitation, panel replacement and

white-topping applications• Kubota Duel Fuel gas/propane powerback• Instant forward- and reverse-screeding action• Removable hydraulic power pack• Heavy-duty jack stands allow movement around

the job site• Optional hydraulic pressure washer to

simplify cleanup

WHITEMAN DUOSCREEDSFeatures• Blade quickly removed without tools;

handle folds for storage• Powered by maintenance-free flexible shaft• Unique patented reversible blade design allows both

form-to-form and wet screeding with a single blade

Up to 52 ft. length

Technical specificationsMAX LENGTH FT (M)

WORKING WIDTH FT(M)

STRIKE TUBE

SPEED

GASOLINE/ PROPANEENGINE

WEIGHT 52 FT. W/POWER UNIT

LBS (KG)

WEIGHT OF POWER UNIT

LBS (KG)

52(15.8) 14-50(4.3-15.2)

450RPM

31/29.5KUBOTA

1,500(680)

500(227)

SCREED MODEL

ENGINE HP (KW)1

VPM DRIVE SYSTEM WEIGHT LBS (KG)

DSGPULW HONDA GX35 1.3 (1.0) 5,500 FLEXIBLE SHAFT MAINTENANCE FREE 32 (14.5)

MODEL: DSBLW

BLADE WIDTHS FT (M)

6 (1.8) 8 (2.44) 10 (3.0) 12 (3.66) 14 (4.27) 16 (4.88)


DUOSCREEDBLADE

The handheld screed uses a unique reversible blade that is designed for form-to-form and wet screeding.


35

VIB

RA

TOR

Y SC

REED

S

WHITEMAN TRUSS SCREEDSFeatures• Durable triangular steel truss spans up to 65 ft.• Gas engine- or air-driven vibration, steel truss design• Heavy-duty steel

construction• Optional self-propelled

winches (gasoline version only) minimize labor

Universal Joint Kits

Invert/Crown Kits

Adjustable End Brackets

Adjustable End Brackets with Rollers

ENGINE-POWERED AIR-POWEREDDESCRIPTION MODEL WEIGHT

LBS (KG)MODEL WEIGHT

LBS (KG)

2.5-FT.(0.76M) TRUSS SECTION WSHE25 57 (26) WSHA25 50 (23)



10-FT.(3.0M) TRUSS SECTION WSHE100 190 (86) WSHA100 190 (86)

SELF-PROPELLED WINCH - (LEFT)(RIGHT) WSHESPW(L)(R)* 105 (48) – –

END HANDLE SET WSHEH 54 (27) WSHAH 54 (27)

9-HP HONDA ENGINE KIT WSHEKIT9H 112 (51) – –

11-HP HONDA ENGINE KIT WSHEKIT11H 112 (51) – –

5’ SECTION W/ WSHEKIT8H MOUNTED WSHE50KIT9H 207 (94) – –

5’ SECTION W/ WSHEKIT11H MOUNTED WSHE50KIT11H 207 (94) – –

UNIVERSAL JOINT KIT WSHEKITUJ 22 (10) – –

INVERT CROWN KIT WSHEIC 98 (45) WSHAIC 62 (28)

REINFORCEMENT BRACKET WSHRBE 6 (2.7) WSHRBA 6 (2.7)

ADJUSTABLE END BRACKET WSKITAEB 24 (11) WSKITAEB 24 (11)

ADJUSTABLE END BRACKET WITH ROLLERS WSKITAEBR 26 (12) WSKITAEBR 26 (12)

HAND WINCH SET WSHW 42 (19) WSHW 42 (19)

*Includes standard mounted 2.5 ft. sections


SCREED KITSAND ACCESSORIES

CONCRETE/MASONRY36


WA

LK-B

EHIN

D TR

OW

ELSWHITEMAN TROWELSFeatures• Reliable gasoline engines and electric motors• Optional QuickPitch™ Control for fast, precise

blade adjustment• Equipped with heavy-duty centrifugal clutch• Optional manual (hand) clutch• Precision balanced for the ultimate finish• CA4HM has folding handleTechnical specifications

MODEL COVERAGE IN (MM) HP (KW)1 MOTOR RPM

CA4HM* 24 (610) 3.5 (2.6) HONDA 70-130

CA4HC 24 (610) 3.5 (2.6) HONDA 70-130

J36E2 36 (914) 2 (1.5) 115/230V 30-160

J36H55 36 (914) 4.8 (3.6) HONDA 60-115

J36S60 36 (914) 6.0 (4.5) SUBARU 60-115

J36H90H 36 (914) 8.5 (6.3) HONDA 90-155

B46H90 46 (1,170) 8.5 (6.3) HONDA 60-130

B46S90 46 (1,170) 9.0 (6.7) SUBARU 60-130

B46H11H 46 (1,170) 9.5 (7.1) HONDA 90-1551 See page 46 for details.* Includes handle

WHITEMAN PRO TROWELSFeatures• Apply Fresno or broom finish during

troweling operations• Reduces time required to finish the floor• Available in 36" or 46" configurations• Innovative clutch linkage offers improved ergonomicsTechnical specifications

MODEL COVERAGE IN (MM) HP (KW)1 MOTOR RPM

PRO36 36 (914) 8.5 (6.3) HONDA 60-130

PRO46 46 (1,170) 9.5 (7.1) HONDA 60-1301 See page 46 for details.

37

Smooth-operating blade-pitch control knob

Padded handle

TROWELHANDLES

Trowel handles are available with either standard or QuickPitch™ configurations.

Our handle design dramatically reduces the vibration transmitted to the operator. These height-adjustable handles will dramatically increase operator comfort and decrease fatigue over an eight-hour day.

Positive-action shut-off switch

SXH TwistPitch HandleQXH QuickPitch™ Handle

CONCRETE/MASONRY

WA

LK-B

EHIN

D TR

OW

ELS

WHITEMAN HEAVY-DUTY TROWELSFeatures• High-speed models for burnishing of slabs• Heavy-duty gearboxes to handle extra

weight and performance of the HDA series• Variable-speed transmission on HDA48413H• CVT drive system allows the high torque

panning and high speed for burnishing slabs

Technical specificationsMODEL COVERAGE

IN (MM)BLADES ROTOR RPM ENGINE HP

(KW)1WEIGHT LBS (KG)

HDA48413H 48 (1,220) 4 30-225 HONDA 11.7 (8.7) 315 (166)


38

WHITEMAN INSTACLUTCH™Features• Advanced friction clutch stops the unit before

a quarter of a turn if the operator releases the handle at full RPM

• Eliminates need to throttle engine down during momentary work stoppages

• Four blade spider assembly features economically replaceable wear parts that reduce maintenance costs over the life of the machine

• Proven gearbox durability delivers years of trouble free operation

• Handle assemblies for the InstaClutch™ system include a Standard or Quick pitch option

Technical specificationsMODEL ROTOR RPM ENGINE HP (KW)1 LBS (KG) HANDLES

36-INCH (914 MM)

JH55C 60-115 HONDA GX160 4.8 (3.6) 164 (74.3)SXHC OR

QXHCJH90C 60-130 HONDA GX270 8.5 (6.3) 190 (86.1)

JS60C 60-115 SUBURU EX170 5.7 (4.2) 176 (79.8)

46-INCH (1218 MM)

BH11C 60-130 HONDA GX340 10.7 (7.9) 247 (112)SXHC OR

QXHCBH90C 60-130 HONDA GX270 8.5 (6.3) 245 (111)

BS90C 60-130 SUBURU EX270 9.0 (6.7) 218 (98.8)1 See page 46 for details.

CONCRETE/MASONRY multiquip.com 39

RID

E-ON

TRO

WELS

WHITEMAN TROWELS – MECHANICAL DRIVEFeatures• Twin 36" and 48" models• HHNG5 features air-cooled 35HP

Vanguard engine• Twin Pitch control simultaneously

adjusts blade pitch of rotors or disengages to adjust individually

• CVT Drive System on JWN and HHN Ride-On Trowels allows high-torque panning and high-speed for burnishing slabs

MODEL PATH WIDTHIN (MM)

ROTOR RPM ENGINE HP (KW)1

WEIGHT LBS (KG)

JWN24HTCSL 75 (1,910) 30-180 HONDA 20 (15.0) 685 (209)

HTN27KTCSL 91 (2,310) 30-145 KOHLER 25 (18.6) 780 (354)

HTN28KTCSL 91 (2,310) 30-145 KOHLER 28 (21) 800 (363)

HHNG5 92 (2,336.8) 0-180 VANGUARD 35 (26) 1,083 (491)

HHXDF5 92 (2,336.8) 0-180 KUBOTA WG972 31 (22.8) 1,654 (750)



MODEL PATH WIDTHIN (MM)

ROTOR RPM ENGINE HP (KW)1

WEIGHT LBS (KG)

HTXD6i 92 (2,330) 0-160 YANMARTURBO DIESEL 55 (41.01) 2,100 (952)

STXD6i 117 (2,970) 10-130 YANMARTURBO DIESEL 55 (41.01) 2,270 (1,030)

HTXG6DF 92 (2,330) 0-160 PSI 2.4L Dual Fuel 68 (50.7) 2,174 (986.11)


WHITEMAN TROWELS – HYDRAULIC DRIVEFeatures• Hydraulic drive and patented hydraulically

controlled steering• Optimum speed and torque range for

floating and finishing• Heaviest-duty spider and wear plate assembly• No belts, pulleys or gear boxes• 8-ft. and 10-ft. models available• Gasoline/Propane option on HTXG6DF


RID

E-ON

TRO

WELS

Pans: Superflat or flat configurations, for use with ride-on trowels, and flat or domed for use with walk-behind trowels. Allows fast floating and easy movement from wet to dry areas. Excellent for applying shake-on toppings. Achieve higher FF numbers and increased production. Available in the following sizes: 24", 36", 46", 48" and 60".

FLOAT PANS & TROWEL BLADES

Interchangeable with most competitive models. Provides best possible results when used with Whiteman trowels. Unique Enduro Blade series features heavy-duty design, providing up to 50% longer life. Quick-change blades have bolt-less design for fast, easy blade replacement.

Blades: Float, finish and combination float/finish for walk-behind and ride-on trowels

CONCRETE/MASONRY40

MQ WHITEMAN CONCRETE SOLUTIONS

For more than 75 years, MQ Whiteman has been recognized around the world as the leader in flat floor placement and finishing. Now we expand our line with a revolutionary group of environmentally-friendly chemical solutions. MQ SlabArmor™ Products will forever change the way concrete is placed, finished, and maintained.

SlabArmor™ Finishing Solutions Using walk-behind or ride on power trowels, the SlabArmor™ patented curing formula and application process starts working immediately when applied during concrete placement. The nano-sized technology creates a hydration-enhancing vapor barrier and allows the contractor unprecedented control over the finishing process, extending the time to finish concrete in all weather conditions. Through this patented system, SlabArmor™ creates even hydration resulting in denser concrete, flatter floors with minimized cracking or curling.

SlabArmor™ Starter/Closer

CO

NC

RETE SO

LUTIO

NS

SlabArmor™ Starter SlabArmor™ refines the surface of the slab while retaining 97% of the placement water, significantly minimizing volume loss, cracking and curling.

CONCRETE/MASONRY multiquip.com 41

The SlabArmor™ system consolidation of the construction schedule is possible due to all curing and densification happening at time of placement by the flatwork contractor. It is suitable for use on cementitious-based products and can be used in conjunction with diamond polishing and/or decorative color.

SlabArmor™ Plus Maintenance Solutions SlabArmor™ Plus products assist in the restoration and revitalization of existing concrete, while they also protect and maintain your SlabArmor™ cured concrete. Through continued use, MQ SlabArmor ™Plus products create a denser, more sustainable finish over time. This also includes a family of pH neutral products that effectively removes the built-up concrete from concrete mixer drums and equipment in an environmentally responsible manner.

CO

NC

RETE SO

LUTIO

NS

SlabArmor™ Plus Seal&Shine A reactive penetrating product that forms an insoluble chemical bond to produce a dense sealed surface, with superior hardness, enhanced gloss and slip resistance.

SlabArmor™ Plus Clean&Condition This high performance neutral pH cleaner, conditioner, and restorer quickly releases oils and deposits from the floor surface through a sophisticated proprietary chemical matrix of hyper-effective wetting agents. SlabArmor™ Plus Clean&Condition is specially formulated to clean and enhance polished concrete. Regular use will increase the abrasion resistance of any concrete floor.

SlabArmor™ Closer This spray on, leave on material is a fast acting formula allowing for minimal down time.

SlabArmor™ Finishing Solutions (cont'd)

PermaMelt™ Can be used as an Anti-Icer to prevent accumulation of snow and ice before the storm, or as a De-Icer after the storm to facilitate ice and snow removal.

SlabArmor™ Plus Equipment Wash (Not pictured.) Achieve results that last while reducing maintenance expenses and upkeep requirements over the life of your equipment.

SlabArmor™ Plus Drum Wash Attain greater levels of ROI and increase overall operating efficiencies by hauling only what you get paid for.

CONCRETE/MASONRY42

SAW

S & B

LAD

ES

DIAMOND BLADESFeatures• Blades for concrete, asphalt,

masonry, ceramics and stone• Core Bits for concrete, asphalt,

masonry, ceramics and stone• Top quality manufacturing • Guaranteed performance• Laser Weld Technology

MASONRY SAWS MP1 SERIES Features• Gasoline or electric models• 14" (356mm) blade capacity• 5" (127mm) depth of cut • Mounted carrying handles• Open-back design• Industrial water pump

MASONRY SAWS MP2 SERIES Features• Gasoline or electric models• 20" (508mm) blade capacity• 8" (229mm) depth of cut • Open-back design• Foot-pedal/screw-thread cutting head control• Industrial water pump

For Blade and Core Bit specifications, please request the Diamond Cutting Tools brochure.

Models MP115E, MP120E, MP1H

Models MP25E1, MP25E3, MP2H

Shown with optional saw stand

MODEL POWER HP BLADE CAPACITY IN

CUTTING DEPTH IN

WEIGHT LBS

MP1 & MP2 MASONRY SAWS

MP115E 115/230V ELECTRIC 1.5 14 5 218

MP120E 115/230V ELECTRIC 2.0 14 5 220

MP1H HONDA GX160 4.8 14 5 256

MP25E1 230V ELECTRIC 5 20 8 501

MP25E3 230V ELECTRIC 5 20 8 501

MP2H HONDA GX270 8.5 20 8 570



SAW

S

AccessoriesMODEL DESCRIPTION WEIGHT LBS

MS3SS PORTABLE SUPPORT STAND 25

MS3WK WATER KIT, INCLUDES PUMP, TRAYS, PLUMBING 20

MP3DK DRY SAWING DUST KIT 15

AccessoriesMODEL DESCRIPTION WEIGHT LBS

TSS PORTABLE SUPPORT STAND, TP7X AND TP24 31

TSSX PORTABLE SUPPORT STAND, TP24X 32

MASONRY SAWS MP3 SERIES Features• Compact, light weight• Powerful 2.5 HP 115V Universal motor• 14" (356mm) blade capacity• 5" (127mm) depth of cut• Precision cuts• Chop saw design• Dry/wet cutting


CUTTING LENGTHIN

WEIGHT LBS

TP7X 115V ELECTRIC 1.0 7 17 43

TP24 115V ELECTRIC 1.5 10 24 65

TP24X 115V ELECTRIC 1.5 10 24 103


CUTTING DEPTHIN

WEIGHT LBS

MP3 115V ELECTRIC 2.5 14 5 75



TILE SAWS Features• Rugged and portable• Precision cuts on ceramics, masonry and stone• 7"/10" (178/254mm) blade capacity• 17"/24" (431/610mm) rip cut capacities• Powerful electric motors• Industrial conveyor cart design

Optional saw stand available

43

SAW

S

CONCRETE/MASONRY44

MODEL MOTOR HP (KW)1

BLADE CAPACITY IN (MM)

CUTTING DEPTHIN (MM)

WEIGHT LBS (KG)

SLAB SAVER

SP1G SP1G 5.5 (4.1) 10 (25.4) 3.25 (83) 104 (47)

SP1 SERIES

SP118 HONDA 11 (9.7) 18 (457) 7 (178) 270 (122)

SP15E16 230V ELECTRIC 5 (3.7) 16 (406) 5.5 (140) 235 (106.8)

SP2 SERIES

SP213H20A HONDA 11 (9.7) 20 (508) 8 (203) 280 (127)

SP2S13H20A HONDA 11 (9.7) 20 (508) 8 (203) 280 (127)

SP2S20H HONDA 20.8 (15.5) 20 (508) 8 (203) 400 (181.8)

STREET PRO SAWS Features• Gasoline engine and electric motor models• 10" - 20" (25 - 508mm) cutting capacity• Push and self-propelled models• Rugged industrial components• Minimal maintenance design



CO

RE D

RILL M

AC

HIN

ES

CONCRETE/MASONRY

HAND-HELD CORE DRILLSFeatures• Convenient, adjustable shoulder rest• Three-position hand grip• Internal water feed • Lateral slip clutch• Carry case, tools included

DRILLING STANDSFeatures• For use with MQ core drill motors• Straight or angle drilling to 45°• Large bore with bolt-type anchor• VAC rings available• Quick change-over mounting plates

DRILL MOTORSFeatures• Single and dual speed units• Universal mounts• All ball and roller bearings• For diamond coring, reinforced concrete, tile,

masonry or natural stone


MODEL MOTOR AMPS SPEED

DM15A9C MULTIQUIP 15 2-SPEED W/CLUTCH

DM4094 MILWAUKEE 20 2-SPEED

DM4096 MILWAUKEE 20 2-SPEED W/CLUTCH

MODEL DESCRIPTION

CDM2CSA MINI ANGLE BASE COMBO STANDCDM3CSA ANGLE BASECDM3CS STRAIGHT MAST


MODEL DESCRIPTION CAPACITYIN (CM)

AMPS SPEED RPM

CDM1H HAND-HELD WET – 3 (7.6)DRY – 5 (12.7) 12 0 TO 2,200


Bits sold separately.

Bits sold separately.

Drill motor sold separately

45

NOTES

1 Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Multiquip Inc. and its subsidiary companies makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy of the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and its website for specific information regarding the engine power rating.

46

ORDERING PARTS ONLINEOrdering parts has never been easier! Choose from three easy options:

If you have an MQ Account, to obtain a Username and Password, E-mail us at: [email protected] obtain an MQ Account, contact your District Sales Manager for more information.

NOTICE: All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST.

Go to www.multiquip.com and click on

Online Ordering to log on and save!

Use the internet and qualify for a 5% Discount on standard orders for all orders which include complete part numbers.*

Fax your order in and qualify for a 2% Discount on standard orders for all orders which include complete part numbers.*

NON-DEALER CUSTOMERS: Contact your local Multiquip Dealer for parts or call 800-427-1244 for help in locating a dealer near you.

INTERNATIONAL CUSTOMERS: should contact their local Multiquip Representatives for Parts Ordering information.

SPECIFY PREFERRED METHOD OF SHIPMENT: • UPS/Fed Ex (Priority One, Ground, Next Day or Second/Third Day)• DHL• Truck

WHEN ORDERING PARTS, PLEASE SUPPLY:• Dealer Account Number • Dealer Name and Address• Return Fax Number • Applicable Model Number• Shipping Address (if different than billing address)• Quantity, Part Number and Description of Each Part

ORDER VIA INTERNET (Dealers Only):Order parts on-line using Multiquip’s SmartEquip website!

• View Parts Diagrams• Order Parts• Print Specification Information

All customers are welcome to order parts via Fax. Domestic (US) Customers dial: 1-800-6-PARTS-7 (800-672-7877)

Domestic (US) Dealers Call: 1-800-427-1244

ORDER VIA FAX (Dealers Only):

ORDER VIA PHONE:

Best Deal

Note: Discounts Are Subject To Change

Note: Discounts Are Subject To Change

All major credit cards accepted. 47multiquip.com

For more information or to request a specific product brochure Call: 800-421-1244International: 310-537-3700

MULTIQUIP INC.18910 WILMINGTON AVENUECARSON, CALIFORNIA 90746TEL: 310-537-3700TEL: 800-421-1244FAX: 310-537-3927E-MAIL: [email protected]

SALES DEPARTMENTTEL: 800-426-1244FAX: 310-537-1986FAX: 800-556-1986

PARTS DEPARTMENTTEL: 800-427-1244FAX: 310-637-3284FAX: 800-672-7877

SERVICE DEPARTMENTTEL: 800-478-1244FAX: 310-537-4259

MULTIQUIP INC. – CANADA4110 INDUSTRIEL LAVAL, QC, H7L 6V3 TEL: 450-625-2244 TEL: 877-961-4411FAX: 450-625-8664EMAIL: [email protected]

INTERNATIONAL SALES, PARTS, SERVICETEL: 310-537-3700

© COPYRIGHT 2016, MULTIQUIP INC. REVISION (01-16_JBD)

Connect with us on

equipment guide guide construction, power and lighting compaction equipment rammers ..... 4 rollers:...

Documents