engraving machine instruction manual
TRANSCRIPT
Engraving machine instruction manual
Model:Three axis Four axis
CNC6040GZ
CNC6090GZ
product description
1. This product is suitable for industrial technology, advertising design, art,educational programs, amateurs, architectural models, printed circuit boards, etc.
2. The miniature mobile gantry moving structure is connected to the computer with a cable,and like
a printer, the scanner can be used as an external device like a computer.
3. It can help you design a fast real-time display with the intent to cut metal and non-metalmaterials, and
can engrave 2D, 3D worksProduct Features
1. 1500W variable frequency spindle motor for efficient engraving
2. Spindle motor water cooling system, stable and reliable, durable
3. Using precision ball screws for precise engraving
4. High precision, extremely hard guide rails, smooth operation and extremely durable 5.
Applicable wood, medium density fiberboard, 3D native wood carving, PVC, acrylic, metal,
wood, composite board, glued Board, stone carving
6. Support Software: Mach3 / Emc2 / Type3 / ARTCAM
1
Spindle motor mode settingHow to set the parameter data of VFD
If you need to control the spindle motor with a PC, set the VFD as follows:
1) Transfer the "toggle button" to the PC side control.
2) Under monitoring status, click the “FUNC” button on the control panel and then display “d 000” on the digital tube.3) d 000 to d 001, then "FUNC", "1", FUNC.
“0” is displayed on the digital tube, which is locked.
The digital display "1" is unlocked.
4) Click on “FUNC”, d 001 to d 032, “FUNC”, “000”, “FUNC”. The digital tube displays "001"and operates in PC mode.The digital tube displays “000” and operates through the manual mode, “RUN”, and the knob.
Host
Z-axis stepper motor
X-axis hand wheelX-axis stepper motor
Y-axis stepper motor
Drag chain Water pipeX Y Z axis, spindle motor terminal
Workbench
Machine foot
Z-axis handwheel
Spindle motor terminalSpindle motor fixture
Longmen
Spindle motorEa11 chuck
A axis
keyholeA-axis stepper motor
clawsupport
Synchronous gear belt Stepper motorsync hronous gear
stopfrequency
StartFUNCShift
updown
VFD switchEmergency stopswitchSpindle motor mode switchingManualautomatic
CNC controller front
USB interface
AC input
Spindle motorport A-axisZ axisY axisX axis
fan
Back of CNC controller
check
2
bucket Water pump Pump power plug
Water pipe
Spindle motor
water intake
Outlet
Cooling system installation diagram
Wire connection diagram
3
A axis
- +
Spindle motor
XX
-+
ZA
A Z
- +
Y
Y
--
++
Axial schematic
MACH3 keyboard control Spindle motor rotation schematic
4
Parts List
Installation Notes
1. Assemble a good machine, place it on a sturdy platform, adjust the four feet of the machine, and place the machine horizontally.
2. Verify that your computer has a USB port.3. The control box is placed on a ventilated, dry, sturdy platform to prevent high temperatures and dustConnect the control box with the USB cable to your computer and lock it to prevent the line from disconnecting
4. Connect the main unit and control box wiring. The correct cables for X, Y, Z, A, Z axis and spindle motor are not allowed to be vacant, otherwise the control box drive unit will be damaged.
5. Install the spindle motor and cooling pump tubing. The heat pump can be placed under water, then the heat pump is energized to check the water circulation. The cooling system is operating normally.
6. Mach3 software is properly installed on your computer
7. Check the line connection, water circulation, confirm the power before the test machine
Host * 1
A-axis cable * 1
A axis * 1
Top cone * 1
Wrench*1
4MM nut* 3
4MM screw* 3
CNC controller* 1
USB interface data cable* 1
Power cord* 1
Water pump * 1
Sealing tape* 1
Hose connector* 1
Fixing parts* 4
Wrench13-15 * 1 14-17 * 1
Carving knife 2.0*2 3.0*2
Hexagon screwdriver: 4mm * 2 5mm * 2
Instruction manual*1
Disc*1
5
There is no A-axis and A-axis accessories for the three-axis
The DVD disk is being loaded into thecomputer and double clicked.
Mach3 settings and relative settings
6
7
8
√
√
Software installation is complete, restart the computer
9
Machine operation steps:①Turn on the power ②Release the emergency resetswitch(Twist to the right is to release, press to stop) ③Click theemergency reset button on the software ④No letter is normal Step ⑤ asshown below ⑥Fix the material and perform knife setting,Move the machineto which position the tool setting point is in the program (The toolsetting points are on the top, bottom, left, right and center of thematerial, any of 5 points can be selected) After the tool head touches thetool setting point, the data on the XYZ axis is cleared, As shown below ⑦knife setting is completed, ⑧Import a good program (load G code) ⑨Openthe spindle ⑩Click to cycle to start the machine and start processing.
10
Click XYZ axis to reset
Click the spindleforward to openthe spindle
Spindlespeedadjustment
Enter 24000 firstand click the enterkey on the keyboard
Adjust processing speed
11
Handwheel mode: When the stepper motor speed is set to X, Y, Z axis, the working device is set.WARNIN: If you don't do it properly, there are many dangers. The machine is not a toy. The learner encountered a machine error, they did not fully understand how the machine works and run the G code, and then the machine spindle hit the rack.In an emergency, in addition to clicking the reset emergency stop, if the protection switch is not installed, turn off the motor power. It is most convenient to stop the power cord and the machine will automatically turn off.