engineering / product design services - optikos / product design services ... the solution needed to...
TRANSCRIPT
Engineering / ProductDesign Services
Optikos’s strength is that it can offer not just optical design services, but
can provide complete optical engineering services that include optical,
mechanical, electronic and product design. We work closely with your design
team taking responsibility for system performance. You can see the work
product of our engineering staff not only in our clients products, but also
in our own proprietary metrology products and our licensed products.
Our activities span that full range of optical engineering – from ultra-violet
to thermal infrared - from low cost consumer and commercial products to
sophisticated test systems – from products and services to local customers
to a world-wide customer base.
Since the late 1990s, Optikos has been certified as complying with ISO 9001
and we are certified to the latest revisions of the standard. We understand
the importance of quality to our customers and have made a strong
organizational commitment through our ISO compliance.
Visit us at www.optikos.com
107 Audubon RoadBuilding 3Wakefield, MA 01880Phone: 617-354-7557Fax: 617-354-5946Email: [email protected]
TESTINGTesting of optics and electro-optical imaging systems
PRODUCTSPrecision optical metrology equipment
ENGINEERINGSystem engineering for optical and metrology products
MANUFACTURINGPrototyping and production of electro-optical systems
We enable our clients to bring their ideas and concepts to reality.
Our clients include leading design development, consumer, and industrial product firms & ourselves!
We have a worldwide reputation for excellence and innovation that has been sustained for over two decades.
C A S E S T U DY
ITT Tracking Telescope OptimizationProblem
ITT is responsible for five NASA Space Shuttle tracking telescope systems at the launch site in Cape Canaveral Florida. These telescopes, called ATOTS, MIGOR, and DOAMS are used for various types of downrange imaging of shuttle launches. The telescopes were exhibitingless than optimal imaging characteristics from out focus camera images. ITT was looking for a method to realign and precisely focus the high-speed cameras on each of these tracking telescopes. The solution needed to be simple, robust and cost effective. It also needed to operate on-site at each telescope installation.
Partial US Client List� Alcon
� Affymetrix
� Allergan
� Boston Scientific
� CibaVision
� Compucyte
� Cytometrics
� Digimarc
� Elbit
� Fisher-Price
� Gillette
� Hewlett-Packard
� IBM
� ITT
� Intel
� Johnson &Johnson
� KLA-Tencor
� Lockheed Martin
� Northrop Grumman
� Philips
� Raytheon
� Saab Dynamics
� Samsung
� Schlumberger
� Teradyne
� Texas Instruments
� UPS
� Vistakon
� Zygo
Contact Optikos today to discuss your lens measurement [email protected]
Solution
Our engineering team came up with an approach inspired by a common optical design approach – ray tracing. That is, by tracing single rays of light into the telescope system and monitoring the characteristics of that ray on the image plane, system focus can be determined and optimized. If the camera’s image planeis forward of the best focus position, then the raytraces across the image plane in one direction. If the image plane is behind best focus, then theray traces in the opposite direction. At bestfocus, the spot is fixed. The alignment systemwatches the behavior of the single ray as it movesacross the image plane and gives the precise location of best focus.
The Optikos alignment system uses a lateral stage system, a laser, opto-mechanical stages and a sophisticated optics assembly to insure the“ray” of light remains parallel as it traverses across the telescope aperture.The optics is intolerant to small mechanical stage errors so near perfect parallelism is maintained across the full aperture. In addition, the system incorporates precision tip and tilt controls to steer the light ray into off-axis conditions. Scanning off-axisrays allows the user to determine the magnitude and direction of image plane tilt, which can be corrected in the adjustable camera mount.
Since this alignment system is required to operate in the field, our designers needed to builda system that could handle the environmental extremes of Florida. The opto-mechanics wereall athermalized to insure good performance over a wide range of temperatures. The unit isalso sealed providing years of error free testing.
Results
Optikos has successfully installed five alignment systemsinto the field. Our customer has reported great successin improving the quality of images from each of the telescope systems.