engineering drawing lesson 3-orthogonal projections
DESCRIPTION
Engineering drawing drafting - Orthogonal projections, 3rd third angle and 1st first angle projectionTRANSCRIPT
![Page 1: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/1.jpg)
glmoyo
Drawing Orthogonal Projections
Producing assembly drawings in first or third angle projection
![Page 2: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/2.jpg)
Projections: Four Basic Types
Isometric
Oblique Perspective
Orthographic
![Page 3: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/3.jpg)
glmoyo
Drawing paper
![Page 4: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/4.jpg)
glmoyo
Drawing paper
![Page 5: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/5.jpg)
glmoyo
Drawing paper
![Page 6: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/6.jpg)
glmoyo
Drawing lines
![Page 7: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/7.jpg)
Construction LinesConstruction lines When a drawing is rendered, basic faint lines are drawn to provide a framework for the completion of the projection.
Although not part of the object, these lines provide the framework to construct the drawing of the object.
![Page 8: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/8.jpg)
Height
Depth
Width
Front View
Top View
Right Side View
Dimension LinesDimension Lines display precise information about the size of the object.
![Page 9: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/9.jpg)
Height
Depth
Width
Front View
Top View
Right Side View
Front View
Top View
Right
Side
View
Object LinesObject Lines Represent features that are only visible in the current view.
![Page 10: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/10.jpg)
Hidden lines
Front View
Top View
Right Side View
ALL Hidden or internal details must be included.
What does the inside of this block look like?
Hidden Lines represent features that cannot be seen in the current view. We show these unseen details, with dashed lines.
![Page 11: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/11.jpg)
Center Lines
Front View
Top View
Right Side View
Center lines represent symmetry and mark the center of circles, the axes of cylinders, and the axes of symmetrical parts, such as bolts.
Again, though not part of the object, these lines are important elements of the objects dimension and construction.
![Page 12: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/12.jpg)
Sectioning of a view
A A
A
A
Section Lines Are used to represent where the object is to be “cut” or sectioned to reveal interior details. This is used when other views may not adequately reveal information about the object.
Sectional view A:A
The section line labeled A:A shows the arrows pointing in the direction to which you are observing the “cut” or section.
![Page 13: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/13.jpg)
Hidden Lines – represent features that cannot be seen in the current view. They are as dark as the object lines.
Center lines – represent symmetry and mark the center of circles, the axes of cylinders, and the axes of symmetrical parts, such as bolts
Object Lines – represent visible features for an object. They are the darkest and most present.
Types of Lines in Orthographic ProjectionsConstruction lines - Basic faint lines which are drawn to provide a framework
for the completion of the projection.
Dimension Lines display precise information about the size of the object.
10cm
Section Lines Are used to represent where the object is to be “cut” or sectioned to reveal interior details. This is used when other views may not adequately reveal information about the object.
A A
![Page 14: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/14.jpg)
Review: Major views used in orthographic projections.
1. Object
2. Hidden3. Center
Isometric View
4. Sectional
![Page 15: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/15.jpg)
Line Type and Weight
• Line type and line weight provide valuable information to the print reader.
• For example, line type and weight can answer the following questions.– Is the feature visible or hidden from view?– Is the line part of the object or part of a
dimension?– Is the line indicating symmetry?
![Page 16: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/16.jpg)
Line Type and Weight
• There are four commonly used line types; – continuous – hidden – center – phantom
![Page 17: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/17.jpg)
Line Type and Weight
• Some lines are more important than others. Importance is indicated by line weight or thickness.– The thicker the line, the more important it is.
![Page 18: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/18.jpg)
Line Types
• Visible lines: – Visible lines represent visible edges and boundaries. – Continuous and thick (0.5 - 0.6 mm).
• Hidden lines: – Hidden lines represent edges and boundaries that
cannot be seen. – Dashed and medium thick (0.35 - 0.45
mm).
![Page 19: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/19.jpg)
Line Types
• Center lines:– Represent axes of symmetry.– Long dash – short dash and thin (0.3 mm).
![Page 20: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/20.jpg)
Line Types
• Phantom line: – Phantom lines are used to indicate imaginary
features. • alternate positions of moving parts • adjacent positions of related parts
– The line type is long dash – short dash – short dash and the line weight is usually thin (0.3 mm).
![Page 21: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/21.jpg)
Line Types
• Dimension and Extension lines: – Dimension and extension lines are used to show
the size of an object. • In general, a dimension line is placed between two
extension lines and is terminated by arrowheads, which indicates the direction and extent of the dimension.
– The line type is continuous and the line weight is thin (0.3 mm).
![Page 22: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/22.jpg)
Line Types
• Cutting Plane line: – Cutting plane lines are used to show where an
imaginary cut has been made through the object in order to view interior features.
– The line type is phantom and the line weight is very thick (0.6 to 0.8 mm).
– Arrows are placed at both ends of the cutting plane line to indicate the direction of sight.
![Page 23: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/23.jpg)
Line Types
• Section line: – Section lines are used to show areas that have
been cut by the cutting plane. – Section lines are grouped in parallel line patterns
and usually drawn at a 45 angle. – The line type is usually continuous and the line
weight is thin (0.3 mm).
![Page 24: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/24.jpg)
Line Types
• Break line:– Break lines are used to show imaginary breaks in
objects. – A break line is usually made up of a series of
connecting arcs. – The line type is continuous and the line weight is
usually thick (0.5 – 0.6 mm).
![Page 25: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/25.jpg)
Rules for Line Creation and Use
• The following rules will help us create lines that communicate effectively.– CAUTION! Due to computer automation, some of
the rules may be hard to follow.
![Page 26: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/26.jpg)
Using Hidden Lines
• Hidden lines represent edges and boundaries that cannot be seen.
![Page 27: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/27.jpg)
Creating Hidden Lines
• Rule 1:– The length of the hidden line dashes may vary
slightly as the size of the drawing changes.
![Page 28: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/28.jpg)
Creating Hidden Lines• Rule 2:
– Hidden lines should always begin and end with a dash,
– Exception: When the hidden line begins or ends at a parallel visible or hidden line.
![Page 29: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/29.jpg)
Creating Hidden Lines• Rule 3:
– Dashes should join at corners.
![Page 30: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/30.jpg)
Using Center Lines
• Center lines represent axes of symmetry.– They are important for interpreting cylindrical
shapes.
![Page 31: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/31.jpg)
Using Center Lines
– They are also used to indicate circle of centers, and paths of motion.
![Page 32: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/32.jpg)
Creating Center Lines
• Rule 1:– Center lines should start and end with long
dashes.
![Page 33: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/33.jpg)
Creating Center Lines
• Rule 2:– Center lines should intersect by crossing either the
long dashes or the short dashes.
![Page 34: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/34.jpg)
Creating Center Lines
• Rule 3:– Center lines should extend a short distance
beyond the object or feature.
![Page 35: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/35.jpg)
Creating Center Lines
• Rule 4:– Center lines may be connected within a single
view to show that two or more features lie in the same plane.
• CAUTION! Center lines should not extend through the space between views .
![Page 36: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/36.jpg)
Using Phantom Lines
• Phantom lines uses:– They may also be used to indicate adjacent
positions of related parts.
![Page 37: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/37.jpg)
Using Phantom Lines
• Phantom lines uses:– Used to indicate repeated detail.
![Page 38: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/38.jpg)
Using Phantom Lines
• Phantom lines uses:– They are also used to show a change in surface
direction produced by fillets and rounds.
![Page 39: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/39.jpg)
Using Phantom Lines
• Phantom lines uses:– Used to indicate alternate positions of moving
parts.
![Page 40: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/40.jpg)
Creating Phantom Lines
• Rule 1:– Phantom lines should start and end with a long
dash.
![Page 41: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/41.jpg)
Using Break Lines
• Break lines are used to show imaginary breaks in an object.
![Page 42: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/42.jpg)
Creating Break Lines
• There are two types of break lines. – If the distance to traverse is short the series of
connecting arcs is used.
![Page 43: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/43.jpg)
Creating Break Lines
• There are two types of break lines. – If the distance is long the thin straight line with a
jog is used.
![Page 44: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/44.jpg)
Line Precedence
• If two lines occur in the same place, the line that is considered to be the least important is omitted.
• Lines in order of precedence/importance are as follows; – Cutting plane line– Visible line– Hidden line– Centerline
![Page 45: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/45.jpg)
glmoyo
Use of drawing tools
![Page 46: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/46.jpg)
glmoyo
Orthographic Projection
• Orthographic projection is a system of drawing to represent 3D objects by using multipleview drawings
• Ortho – right (for right angle or straight )• the 3D object is projected perpendicularly
onto a projection plane with parallel projectors
![Page 47: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/47.jpg)
Introduction
• Orthographic projection = 2-D representation of a 3-D object.
![Page 48: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/48.jpg)
Introduction
• An orthographic projection represents different sides of an object.
![Page 49: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/49.jpg)
glmoyo
3D object projected orthogonally on plane
Object
Projected side
Plane
![Page 50: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/50.jpg)
glmoyo
Projection Systems
Plane comes first then image and object
Object
Projected image
Plane
Object comes first then then image and plane
![Page 51: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/51.jpg)
glmoyo
Projection Systems
Hold the planes or mirrors towards the object
Hold the object and project to the screen or mirrors at the back
![Page 52: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/52.jpg)
Basic Views - Six orthogonal views
glmoyo
Coming with the three plans in your hands the shadow of the objects fall on them
From inside the box the image of the object falls on three surfaces
![Page 53: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/53.jpg)
Basic Views - Six orthogonal views
glmoyo
Bottom is background (dotted) Top side is background (dotted)
![Page 54: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/54.jpg)
glmoyo
First and third angle projection
When you hold the mirrors (three
planes) towards the object – 3rd angle
project
When you hold the object towards a
mirror – first angle project
![Page 55: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/55.jpg)
Projection symbols
glmoyo
Bottom is background (dotted) Top side is background (dotted)
![Page 56: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/56.jpg)
How do I draw this symbol?
• The recommended proportions for the symbol are as follows
![Page 57: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/57.jpg)
glmoyo
Drawing paper
Front View Side view
Plan View
![Page 58: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/58.jpg)
Creating an Orthographic Projection
• Draw the visible features of the front view.
![Page 59: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/59.jpg)
Creating an Orthographic Projection
• Draw projectors off of the front view.
![Page 60: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/60.jpg)
Creating an Orthographic Projection
• Draw the top view.
![Page 61: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/61.jpg)
Creating an Orthographic Projection
• Project back to the front view.
![Page 62: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/62.jpg)
Creating an Orthographic Projection
• Draw a 45 projector off the front view.
![Page 63: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/63.jpg)
Creating an Orthographic Projection
• Draw projectors over to the 45 line and down.
![Page 64: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/64.jpg)
Creating an Orthographic Projection
• Draw the right side view.
![Page 65: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/65.jpg)
Creating an Orthographic Projection
• Project back if needed.
![Page 66: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/66.jpg)
Creating an Orthographic Projection
• Draw centerlines where necessary.
![Page 67: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/67.jpg)
Creating an Orthographic Projection
![Page 68: Engineering Drawing Lesson 3-Orthogonal Projections](https://reader036.vdocuments.site/reader036/viewer/2022081715/5461ad93af7959ba618b4930/html5/thumbnails/68.jpg)
Drawing Bolts• D represents the major diameter.• Nuts are drawn in a similar fashion.