enggo technical spec final

8/8/2019 Enggo Technical Spec Final

1/12

Copyright Reserved

Enggo Corporation Sdn Bhd(822201-P)[Tel: +603-78772177] [Fax: +603-7877 2077]Ema il: enquiry@engg o.c om.m y Web site: www.eng go.c om .my

1

PORTABLE OXYGEN DETECTOR

The SP1217 is a portable oxygen gas detector which has

been designed to protect the safety of workers in

dangerous work places. It operates for one half year and

more without replacing the battery or sensor. It isextremely small lightweight, and is low priced. The small

size and light weight make the SP1217 ideal for personal

use. If the concentration of gas reaches a dangerous level,

the SP1217 automatically makes vibration as well as visual

and audible alarms. For the convenience of the users, a

high-quality microprocessor is installed and contains

automatic zero-calibration function, and one-touch span-

calibration function. The loud audible alarm, vibration alarm and high-brightness Backlight are

easily recognized. SP1217 displays the maximum and minimum oxygen concentration on demand,

and it has the function of current time setting.

Model: SP1217

Specification

- Detecting gas : Oxygen(O2)

- Sensor type : Electrochemical (Galvanic type)

- Sampling Method : Diffusion

- Response Time : T90 in 10 seconds

- Power : 3.0V Coin Battery (CR2450)

- Alarm indicators : Clearly advises alarm levels both audibly and visually

- Audible alarm : High output Buzzer (80dB at 10cm)

- Visual alarms : Flashing back light visible from all angles

- Vibrator alarm : Pulses warning in gas alarm conditions and status alarms- Alarm point : Low(1st) alarm 19.5%, high(2nd) alarm 23.5% (user changeable)

- Other alarms : Low battery and sensor fail alarm

- Calibration : Zero calibration (0% O2), span calibration (20.9% O2)

- LCD Display : Concentration, current time, battery status and alarm level encountered

- Backlight : Alarm conditions (auto) and on demand

- Field option : Set real-time clock

- Operating temperature : -20 ~ +50

- Humidity : 15% ~ 90% RH (non-condensing)

- Size : 48.5mm(W)84mm(H)32.5mm(D)

- Case : High-impact Plastic, Dust Proof and Weather Resistant

- Warranty : Full 12 months warranty

Applications

Petrochemical, Power Plant, Telecom, Medicine, Mine, Heavy industry, Army, Food industry, Gas

industry, and other confined spaces for worker safety


2/12

Copyright Reserved


2

PORTABLE TOXIC GAS DETECTOR (SP SERIES)

CO H2S

H2

SO2

The SP series is a portable toxic gas (CO, H2S, SO

2, H

2etc) detector which has been designed to

protect the safety of workers in dangerous work places. It operates for two years without replacing

the battery or sensor. It is extremely small lightweight, and is low priced. The small size and light

weight make the SP series an ideal for personal use. If the concentration of gas reaches a dangerous

level, the SP series automatically makes vibration as well as visual and audible alarms. The SP series

also monitors STEL(Short Term Exposure Limit) and TWA(Time Weighted Average) plus instant gas

alarms. The loud audible alarm, vibration alarm and high-brightness Backlight are easily recognized.

Model Gas Range 1st 2nd TWA STEL

SP1227 CO 0-500ppm 25ppm 50ppm 25ppm 200ppm

SP1257 SO2 0-20ppm 2ppm 4ppm 2ppm 5ppm

SP1277 H2 0-1000ppm 100ppm 500ppm N/A N/A

SP1297 H2

S 0-100ppm 10ppm 30ppm 10ppm 15ppm


3/12

Copyright Reserved


3

PORTABLE TOXIC GAS DETECTOR (SP SERIES) continue

Specification

- Detecting gas : CO, H2S, SO2, H2 etc

- Sensor type : Electrochemical- Sampling Method : Diffusion

- Response Time : T90 in 10 seconds(SP1227), in 75 seconds(SP1257), in 90 seconds(SP1277), in 30

seconds(SP1297)

- Power : 3.0V Coin Battery (CR2450)

- Alarm indicators : Clearly advises alarm levels both audibly and visually

- Audible alarm : High output Buzzer (80dB at 10cm)

- Visual alarms : Flashing back light visible from all angles

- Vibrator alarm : Pulses warning in gas alarm conditions and status alarms

- Other alarms : Low battery and sensor fail alarm

- Calibration : Zero calibration, span calibration (20.9% O2)- LCD Display : Concentration, current time, battery status and alarm level encountered

- Backlight : Alarm conditions (auto) and on demand

- Field option : Set real-time clock

- Operating temperature : -20 ~ +50 - Humidity : 15% ~ 90% RH (non-condensing)

- Size : 48.5mm(W)84mm(H)32.5mm(D)

- Case : High-impact Plastic, Dust Proof and Weather Resistant

- Warranty : Full 12 months warranty

Application

Petrochemical, Power Plant, Telecom, Medicine, Mine, Heavy industry, Army, Food industry, Gas

industry, and other dangerous places sometimes exposed to a toxic gas leak for worker safety


4/12

Copyright Reserved


4

PORTABLE 4 GAS DETECTOR

Model: SP12C7The Portable 4 gas detector (SP12C7) is a multi-gas detector designed to provide reliable personal

safety. The SP12C7 is available with up to four independent gas sensors for the protection. The

SP12C7 measures typically oxygen, combustibles, and 2-toxic gases among CO, H2S, SO2, NO2, Cl2,

H2, HCN, and NH3. It features an extra large liquid crystal display (LCD) and an optional sample pump

that is built right into the instrument, yet it's small enough to carry in your hand or clip to your belt.

Specification

- Sensor type : 1ea-Catalytic combustion, 3ea-electrochemical

- Detecting gas : Combustibles, O2,(mandatory) CO, H2S, SO2, NO2, Cl2, H2, HCN, NH3 (two gas

selection)

- Display : Big size 128 X 64 graphic LCD

- Alarm : High brightness LED, Buzzer (110dB at 30cm)

- Power : Rechargeable battery

- Additional function : Data logging

Application

Refineries, chemical processing, water & waste water facilities, semiconductor manufacturing, rail car

and tank truck cleaning, resin and nylon production, underground storage, sewer entries, cable

vaults, agriculture, etc.


5/12

Copyright Reserved


5

GAS LEAK ALARM SYSTEM (LPG/LNG)

LPG/LNG Gas Detector

Model: SI560LPG

Flammable gas detector(SI560LPG) is a separated gas detector, composed of detection part and control

part which displays gas concentration from the signal received from the detection part. Detection part

has a structure of flameproof enclosures. In order to stabilize the sensor operation, we introduced a

stabilization step at an initial stage of operation. SI560LPG is also robust for the change of surroundingtemperature and input voltage and designed to consume the minimum electric power. Automatic shut-

off gas valve is operated by transmitting a gas leakage signal to automatic shut-off gas valve

Specification

- Detecting gas : LPG/LNG gas

- Sensors : Catalytic combustion type, Diffusion type

- Detector type : Single detector type (separated with detection part and control part)

- Power : AC 220V, 60Hz

- Power consumption: 9W @Max

- Alarm point : 20% LEL

- Alarm : Yellow LED lighting and buzzer sound

- Power indication : Green LED lighting

- Breakdown indication : Red LED lighting

- Output voltage : DC 12V.

- Relay contact : COM. NO. NC (250V,3A)

- Operating temperature : -20 ~ 50 - Operating humidity : 0 ~ 95%RH.

- Dimensions : 140mm(W)200mm(D)78mm(H) (control part)

130mm(W)107mm(D)73mm(H) (detecting part)

- Weight : 1.5 Kg- Connection wire: VCTF 3C0.75mm2, 3m

- WARRANTY: Full 12 months warranty

Application

Boiler room, plant, gas storage, gas facilities, restaurant, building, condominium, laboratory.


6/12

Copyright Reserved


6

GAS DETECTION SYSTEM FOR HOME SAFETY (SH1362)

Model: SH1362

Gas monitoring system has a gas alarm, controller and shutoff Device. If the gas is leaked from the

gas valve or gas pipe, the gas detector detects gas leaks and sends the signal to the controller. The

controller exams the signal and then send to the shutoff device. Shutoff device operated to close the

gas pipe to prevent the gas explosion.

SH1362SENSORModel Name MR-100Power DC12V 20%

Detectable gas LPG, LNG

Alarm indication Flashing yellow LED with audible alarm

Alarm concentrationLPG(600ppm ~ 4,500ppm)

LNG(600ppm ~ 12,500ppm)

Power consumption 1.3W

Alarm output DC8V ~ 12V

Operating temp -20C ~ 50C / 0% ~ 95%RH

Dimension 85mm 75 mm 30mm

Weight Approx 80g


7/12

Copyright Reserved


7

GAS DETECTION SYSTEM FOR HOME SAFETY (SH1362) continue

SH1362CCONTROLLER Power AC 220V, 50/60Hz

Shut-off system Electric motor

Shut-off time Within 30 seconds

Indication of open /

close

Open lamp (green)

Close lamp (yellow)

Indication of

Gas leak

Flashing close LED

with audible alarm

Operation Remote / Manual

Dimension 75 105 45 mm

Weight Approx 350g

SH1362SSHUT-OFF VALVEPower DC 12V

Operation Automatic / Manual

Dimension 60 130 150 mm

Weight Approx 350g


8/12

Copyright Reserved


8

FIXED GAS DETECTOR FOR INDUSTRIAL SAFETY

Fixed gas detector

Model: SI-100

The SI series is a state-of-the-art fixed gas detector that canoperate as an independent, stand-alone system or as part of a

system connected with a wire (RS485 or 4 to 20mA) and wireless

(RF). The SI series is an explosion proof gas detector for

continuous monitoring of toxic gases and oxygen in ambient air.

It utilizes a magnetic wand technique for performing non-intrusive

calibration.

SpecificationITEMS SPECIFICATION

1 Measuring Type Diffusion

2 Measuring Value Display Local Digital LCD Display

3 Means Value Display Back light, Custom LCD

4 Detectible Gas Combustible Gas, Toxic Gas, Oxygen

5 Measuring Range 0 -100% LEL &0 -100% Volume

6 Response Time 90% of full scale in less than 20 sec

7 Accuracy 3% / Full scale

8 Zero Drift Less than 2% full scale

9 Operating Temp. -20 to 50 10 Operating Humidity 10 to 95% RH (Non-condensing)

11 Relays (option) Two alarm Relays(


9/12

Copyright Reserved


9

WIRELESS GAS DETECTOR (SL-101)

Gas detector based on Ubiquitous Sensor Network

Model: SL-101

Workers in hazardous environments such as confined space, mine, gas leak(explosion & toxic) are constantly exposed to the health and safety hazards

of dynamic and unpredictable conditions. One approach to enable them to

manage these hazards is to provide them with situational awareness: real-

time data (environmental and physical location data etc.) obtained from

wireless, smart sensor technologies deployed at the work area. SL-101 can

be rapidly deployed and re-deployed in situation that requires a quick and

adaptable response. The durable aluminum enclosure is explosion proof

and can withstand the tough environment of the drilling rig operation.

Specification

ITEMS SPECIFICATION

1 Measuring type Diffusion

2Measuring value

displayLocal Digital LCD Display

3 Detecting gasOxygen(O2), Combustible Gas(CH4,C3H8), Toxic Gas(CO, H2S, SO2, H2,

NH3 etc.),

4 Measuring range

Gas Range Resolution

Oxygen 0 ~ 40% 0.1%

Combustible 0 ~ 100% LEL 1% LEL

Carbon Monoxide 0 ~ 500 ppm 1 ppm

Hydrogen Sulfide 0 ~ 100 ppm 1 ppm

Sulfur Dioxide 0 ~ 20.0 ppm 0.1 ppm

Hydrogen 0 ~ 1000 ppm 1 ppm

Ammonia 0 ~ 100 ppm 1 ppm

Chlorine dioxide 0 ~ 1 ppm 0.02 ppm

Hydrogen Chloride 0 ~ 30 ppm 0.7 ppm

Hydrogen Cyanide 0 ~ 30 ppm 0.2 ppm

5 Response Time 90% of full scale in less than 20 sec


10/12

Copyright Reserved


10

WIRELESS GAS DETECTOR (SL-101) continue

6 Zero Drif Less than 2% full scale

7Operating

Temperature-20 to 50

8Operating

Humidity10 to 95% RH (Non-condensing)

9 Calibration Magnetic interface to configure Alarm

10 Battery lifetime More than 1year (oxygen, toxic)

11 Frequency 433MHz, 914MHz, 2.45GHz (depend on customer request)

12

Node to Node

Communication

Distance

Maximum 300m (depend on the circumstance to install)

13

Number of

Maximum Node /

Gateway

Maximum 500 Nodes per 1 Gateway

14 Power AA battery 3V (oxygen, toxic), 12V (combustible)


11/12

Copyright Reserved


11

GAS SENSOR MODULE FOR INDOOR AIR MONITORING

Gas Sensor Module for Indoor Air Monitoring

There is gas sensor modules (CO2, smell, TVOC) for indoor air

monitoring which is applied to apartments, office, house,building. In general, these sensor modules monitor and transfer

the detecting data to home control system. These also can be

used solely as a gas detecting module for each gas

CO2 sensor module

Specification

- Detecting gas : CO2

- Sensor type : NDIR type

- Detecting range : 0 ~ 2000ppm CO2

- Accuracy : 3% of reading

- Repeatability : < 1% over FS

- Power : DC 5V

- Power consumption : Peak 240mA, Average 150mA, Low

120mA

- Lifetime : 15 years typical

- Operating temperature : 0 ~ 50 - Operating humidity : 0~95%RH non-condensing

- Communication method : RS 485, PLC

ApplicationVentilation control, Air quality monitors, CO2 monitor in green house, CO2 detector etc.

TVOC sensor module

Specification

- Detecting gas : TVOC, Odorous gases such as ammonia and H2S,

- volatile organic compounds (VOC), hydro carbons (HC) and

ethanol

- Sensor type : Metal oxide semiconductor

- Power : DC 5V

- Power consumption : 160mA

- Lifetime : 10 years typical

- Operating temperature : -20 ~ 100 - Operating humidity : 0~95%RH non-condensing

- Communication method : RS 485, PLC

Application

Air cleaners, Ventilation control, Air quality monitors, VOC monitors, Odor monitors, etc.


12/12

Copyright Reserved


12

BREATH CO MONITOR

Model: BMC2000

Breath CO Monitor provides the concentration of %COHb in blood

by monitoring the CO gas of breath. User can monitor a digital

readout of CO ppm and blood %COHb simultaneously on LCD

display together with LEDs and audible indicator. CO monitors are

used by health professionals working in smoking cessation

programmes. Breath CO Monitor helps the smoker to quit by

providing clear evidence of impair CO levels and it can be the

guidelines of progress during the smoking cessation.

Specification

- Displays CO ppm and blood %COHb simultaneously- Audible tone and traffic light LEDs provide additional status

- Countdown timer for hold breathing and auto-zero calibration

- User can operate and calibrate easily

- Uses low-priced disposable mouthpieces

- Can also be used for the monitoring of CO toxic effect and smoke inspiration

enggo technical spec final

Documents