en combiinfomat pr

8/13/2019 En Combiinfomat Pr

1/4

COMBIMATHEATING FORMING LAMINATINGVENEERING 3DFOIL LAMINATING


2/4

COMBIMAT is a compact built, space-saving

THREE in ONE machining centre. The combi-

nation of a heating unit, a forming unit plus

a foil laminating unit enables you to perform

all of these processes. Manufacturing a single

item or a batch production.

COMBIMAT comes with a SIMATIC PANEL

and is easy to operate. The heating unit and

heating hood are equipped with industrial

hot air convection heating. This generates a

very gentle and unproblematic heating up

procedure of all thermoforming materials.

There are no problems with discolouring of

sensitive materials or sticking of materials

onto the working surface.

COMBIMAT THE OUTSTANDING HEATING

AND FORMING UNIT

Combined working with the heating unit and

the heating hood for the most demanding

forming jobs.

Thermoplastics such as: ABS, PMMA (Plexi-

glas, Perspex, Lucite), PET-G (Vivak), PS, PP,

PVC-U, PC (Makrolon), PVDF, etc.

Solid surface materials such as: CORIAN,

LG HI-MACS, STARON, AVONITE, WILSONART,

VARICOR, GETACORE, SCHOCK, PLEXICOR,

etc.

COMBIMAT

THE PERFECT VACUUM PRESS

With a pneumatic opening/closing

mechanism, an industrial heating hood and

membrane changing system for excellent

pressing results.

Gluing of edge strips and profiles

onto work pieces:

Decorative cladding and decorative battens

for furniture or doors, edge bands, cover

strips and protective profiles for front doors,

furniture components and furnishings.

Vacuum laminating and forming:

Formed furniture components, elements

for interior finish and fit out, shop fitting,

interiors and fittings for ships, trains, buses

and airplanes, specially shaped parts for

industry and technical purposes

Veneering and coating of shaped parts

and materials:Profiles for furniture making and high end

interior fit out, door panels, wall and ceiling

battens, work tops, coffin manufacturing,

window sills, technical profiles, formed parts

for technical purposes.

All commercially available veneers and

decorative laminates such as: HPL, PVC,

PET, ABS, etc.

Special coatings such as: glass, leather,

textiles, metal foils, etc.

COMBIMAT THE HIGHPERFORMING

3DFOIL LAMINATING MACHINE

With the fully automated foil laminating

process and the industrial heating hood there

are no limits to foil laminating. For fast and

efficient foil laminating of: kitchen and bath-

room furniture, exclusive interiors, contract

furniture, shaped components, custom made

furniture, etc.

No problems with suppliers of foil laminated

components (long delivery time, quality,

transport costs). The fully automated foil

laminating process enables short cycle times

and therefore a cost effective production

starting with one work piece.

The sturdy industrial design and the reason-

able purchasing costs of the machine ensure

a fast amortisation with a long service life.

COMBIMAT THE MULTITASKINGTHERMOPRESSCENTRE heating and forming of all

THERMOFORMING MATERIALS laminating and veneering

3d-foil laminating


3/4

HEATING AND FORMING OFTHERMOFORMING MATERIALS:

place the thermoforming material onthe pulled out working surface

after the set heating time has fini-shed remove the hot thermoforming

material and place it on the prepared mould in

the vacuum press

pressing time according to theforming parameters of thethermoforming material

remove the ready formed work pieceafter finishing the pressing process

LAMINATING AND VENEERINGOF SHAPED PARTS:

set the desired temperature for theheating hood, open the membraneframe and place the work piece ontothe machine table

switch the vacuum pump on the pressing process starts

frame after end of pressing time

and remove the ready work piece

3D FOIL LAMINATING: pre-heat the machine to reach

operation temperature place the work pieces together

with the distance boards ontothe working table

place the 3D-foil over the machine

table and close the heating hood start the automatic foil laminating

process after the foil laminating process is

finished, open the heating hood and

remove the ready laminated workpieces

IT'S THAT EASY


4/4

COLUMBUS HANDELSGESELLSCHAFT M.B.H.

Thierseestrae 9, 83088 Kiefersfelden, Germany

Tel. +49 (0) 8033 / 97 97 05, Fax. +49 (0) 8033 / 97 97 58

PFOHL HANDELSGESELLSCHAFT M.B.H.

Wildschnauerstrae 31, 6300 Wrgl, Austria

Tel. +43 (0) 5332 / 72 468, Fax. +43 (0) 5332 / 72 907

www.columbus-tech.com [email protected]

ALL IN ONETHERMOPRESSCENTRE

VARIOUS APPLICATIONS THROUGH AN

INGENIOUS MACHINE COMBINATION:

HEATING FORMING LAMINATING

VENEERING 3DFOIL LAMINATING

HEATING:

Combined heating with the heating

drawer plus the heating hood.

Innovative circulating hot air heating guar-

antees even heating from all sides, variable

electronic temperature control to +200 C,

built in timer, overheating protection, pull

out loading drawer, no sticking or discolour-

ing of sensitive materials.

FORMING:

Minimum effort with the pneumatic opening

and closing mechanism.

Perfect pressing of all work pieces with

evenly applied pressure on the whole sur-

face with vacuum technology, fast pressure

build up with powerful vacuum pump,variable vacuum pressure setting ensures

the correct pressure for

each task.

LAMINATING:

The right membrane for each task with

the membrane change system.

Heat resistant silicone membrane to +200

C, rubber membrane with an extreme elon-

gation of 700%, fast heating up of materials

with industrial heating hood ensures short

pressing times, manufacturing of various

shaped parts with different materials -

without female former.

VENEERING:

Short cycle times with the

industrial heating hood.

The constant circulating hot air heating

ensures shorter cycle times = less idle times

= higher productivity, operational without

set-up time, equal temperature distributionon different heights of work pieces, pressing

of vertical and undercut shapes is possible.

3DFOIL LAMINATING:

Precise foil laminating with the fully

automated process.

SIMATIC PANEL with clear menu navigation

ensures easy operation, precise heating of

the 3D-foil, complicated shapes no problem,

observation window for immediate pro-

cess control, no set-up time short heating

time short cycle times, just right for batch

production as well as single items.

ADVANTAGES AT A GLANCE

The technical data contained herein is subject to modifications.

en combiinfomat pr

Documents