eMOBILITYCHARGING STATIONS FOR ELECTRIC VEHICLES

YOUR MOBILITY. OUR TECHNOLOGY.

COMPACT SIZEBIG PERFORMANCE

eMH1

eMH1 ELECTRiC MObiLiTY HOME 1CHARGING STATIONS

Specifications EVSE501 EVSE502 EVSE503

Compliance According to IEC 61851-1/22

Power supply (1) single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz single-phase 230 V / 16 A, 50 Hz

Supply voltage 230 V 230 V / 400 V 230 V

Output current 16 A 16 A 16 A

Max. charging capacity 3.6 KW 11 KW 3.6 KW

Recharge socketIEC 62196-2 compliant

- Type 2 -

Recharge Connectorcomplies with IEC 62196-2

- - Type 2

Recharge Connector complies with SAE1772 Type 1 - -

Charging cable Standard cable,Length: 5 m

-Standard cable,

Length: 5 m

Circuit protection devices RCCB, type A, 30 mA RCCB, type B, 30 mA RCCB, type A, 30 mA

EVCC Control unit IEC 61851-1 Mode 3 compliant, RS485-interface

Terminals up to 2.5 mm2

Ambient temperature -25°C to 50°C

Storage temperature -30°C to 85°C

Relative humidity 5 to 95% (no condensation)

Protection rating I

Overvoltage category III

Protection rating housing IP54

Dimensions in mm h = 272, w = 220, d = 106

Weight / unit 2920 g 2270 g 3950 g

(1) Connection to domestic distribution box only via independent supply cable and separate Type B RCB You can find circuit protection devices for external installations in our main catalogue.

Our eMH1 is the smallest charging station available worldwide, which makes it the perfect so-lution for your garage. Attractive and compact space-saving design. The housing is made from impact-resistant and weatherproof plastic, making the eMH1 suitable for outdoor and carport in-stallations as well. The unit is preconfigured and ready for use, it simply needs to be connected by your electrician. The available charge current is individually adjustable, depending on the current permitted by your domestic supply. Your vehicle is charged gently and efficiently, maximizing the life of your battery.

· Preconfigured and ready to install· LEDs indicate charging status· Lockable cover (access to switching devices)· Integrated circuit protection devices· can be networked with other charging stations via RS485 interface

220 116

272

ABL WallboxEPH II22.02.2012, Ros.

220 116

272

ABL WallboxEPH II22.02.2012, Ros.

220 116

272

powered byeMH2OUR POWER PACKFOR PEAK PERFORMANCE

Specifications EVSE131 EVSE231 EVSE234

Complies with IEC 61851-1/22

Power supply single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 32 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz

Supply Voltage 230 V 400 V 400 V

Power Supply 16 A 16 A 16 A

Max. recharge load 3.6 KW 11 KW 11 KW

Recharge SocketMode 3, IEC 62196-2

- Type 2 -

Recharge ConnectorMode 3, IEC 62196-1

- - Type 2

Recharge Connector acc. to SAE 1772

Type 1 - -

Charger CableMode 3, IEC 62196-2

Standard cable,Length 5 Metres

-Standard cable,Length 5 Metres

Circuit protection devices RCBO, type A, 30 mA RCCB, type B, 30 mA, MCB RCCB, type B, 30 mA, MCB

EVCC Control Unit complies with IEC 61851-1 Mode 3, RS485-Interface

Connector Clamps up to 4 mm2

Ambient Temperature -25°C to 50°C

Storage Temperature -30°C to 85°C

Humidity, relative 5 to 95% (no condensation)

Protection Rating I

Overvoltage Category III

Protection Rating Housing IP54

Dimensions in mm h = 435, w = 320, d = 192

Weight / each 2900 g to 4900 g, depending on version

eMH2 ELECTRiC MObiLiTY HOME 2CHARGING STATIONS

· Charging station preconfigured and ready to install· LEDs indicate charging status· Lockable lid (access to switching devices)· Integrated circuit protection devices· ON/OFF switch for charging station and for interrupting the recharge process· can be networked with other charging stations via RS485 interface

When you need a fast recharge, the eMH2 is the right choice. Charging time is reduced considerably thanks to a charging capacity of up to 22 kW. The available charge current is individually adjustable, depending on the current permitted by your domestic supply. Perfect for private and semi-public areas such as underground and undercover, hotel and company car parks. Thanks to its weatherproof housing, the eMH1 is also suitable for outdoor and carport installations. The eMH2 is pre-assembled for installation and ready for use.

322

0

435

192

e.on WallboxEPH I22.02.2012

322

0

435

192

e.on WallboxEPH I22.02.2012

322 192

435

eMCTHE SLEEK SOLUTIONFOR PUBLIC AREAS

Type EVSE301

Regulations acc. to IEC 621962

Supply voltage 230 V / 50 Hz

Power supply/ max. charging current

16 A

Charging socket DIN 49440 compliant SCHUKO socket

Display LCD, 2 lines

Interface Ethernet RJ45

User identification RFID 13,56 MHz (MIFARE)

User data storage Compaq-Flashkarte

Circuit protection devicesPreconfigured and ready to install

with RCBO, type A, 16 A, 30 mA, power meter and contactor

Connecting terminals bis 4 mm2

Storage temperature - 30 °C…+ 85 °C

Ambient temperature when used - 20 °C…+ 40 °C

Humidity, relative 5…95 % (no condensation)

Protection class I

Overvoltage category II

Resistance class I

Degree of protection for casing IP54

Dimensions 503 x 134 x 126 mm

Gewicht/Stück 4.000 g

· Access via RFID card· protected by FI/LS-switch (RCBO)· integrated energy meter

The eMC is a compact, rugged and weatherproof solution for semi-public areas such as underground and undercover, hotel and com-pany car parks. Users simply unlock the station with a chip card and charge their vehicle while parked. An LCD screen indicates the station’s current operating status.

eMC ELECTRiC MObiLiTY CiTYCHARGING STATION

Discover our entire product range:Catalogue ordering and further information available on our websitewww.abl-sursum.com

TYPE 2 RECHARGE SOCKET

complies with IEC 621962 · 32 A 240 / 415 V AC · signal contact 2 A 30 V DCwith electrical locking solenoid · 12 V / 200 mA DC solenoid · splash proof (IP44)

SIGNAL CONTACTFOR SOCKET OUTLETS1561.../1562... UNd 1661.../1662...16 A / 250 V AC · Signal switch1 change-over relay · 5 A / 250 V AC3 A / 0-30 V DC

TYPE 2 RECHARGE CABLE

complies with IEC 621962 · 32 A 240 /415 V AC · Length: 3 m · splash proof (IP44)

ART.-NO. WEIGHT g / UNIT

UNITS /PACK

LAK32A3 2.200 1

AdAPTER CABLE · TYPE 1 TO TYPE 232 A 230 V AC · Length: 5 msplash proof (IP44)

ART.-NO. WEIGHT g / UNIT

UNITS /PACK

LAKT2T1 1.200 1

ART.-NO. WEIGHT g / UNIT

UNITS /PACK

SUB-UNITS

EVCC 220 3 4

complies with IEC 61851-1 Mode 3 Charge current preset at 16 A · Ad-justable from 6 A to 80 A via serial interface

EVCC CONTROL UNITThe EVCC is the core module built into our charging stations and responsible for communication with the electric vehicle. The charging procedure complies with IEC 61851-1 Mode 3. Potential-free swit-ching contacts are used for load relay (EV supply), to lock charge connectors and for external cooling control. Two ex-ternal LEDs can be connected without additional dropping resistors and indi-cate the current system status of the charging station. Default and target charge current are set using a network-ready RS485 serial interface and allow load management. The target current can be adjusted, even during the char-ging process.

ART.-NO. WEIGHT g / UNIT

UNITS /PACK

LAD32AV 350 1

ART.-NO. WEIGHT g / UNIT

UNITS /PACK

SW23C2 10 10

ART.-NO. WEIGHT g / UNIT

UNITS /PACK

RA4303 500 1

RESIdUAL CURRENT CIRCUIT BREAKER RCCB

Residual Current Circuit Breaker (RCCB) · Universal current Type B4-pole short-delay triggered switching

COMPONENTSFOR CHARGING STATION

COMPACTPOWERFULiNTELLiGENT

ABL SURSUM Bayerische Elektrozubehör GmbH & Co. KG

Ottensooser Straße 2291207 Lauf / Pegnitz

Postfach 10 02 4791192 Lauf / Pegnitz

info@abl-sursum.comwww.abl-sursum.com

Telefon +49 (0) 9123 188-0Telefax +49 (0) 9123 188-188 0000038 / 05.2013

Worldwide leadership in connecting and protecting power

Made in Germany