emi filters - ceramic
TRANSCRIPT
-
7/21/2019 EMI Filters - Ceramic
1/81
C A T A L O G : C E R A M I C E M I F I L T E R S
-
7/21/2019 EMI Filters - Ceramic
2/81
MINI FILTER ......PAGE 2
Ultra miniature filters provide low pass filter functions in the smallest
packages on the market today. They are available in solder-in (both glass
and epoxy sealed), as well as screw-in device types. The solder-ins are
available in C and L configurations and the screw-ins in C, L, Pi, and T section
devices. The small diameter (.072) and the special insertion spanner
allows .075 pitch installation of the screw-in devices. They are ideally
suited for replaceable filter pin applications.
EYELET STYLE FILTERS ....PAGE 7
When space is at a premium, this military recognized filter product
provides maximum efficiency with minimum real estate occupancy.
Eyelet filters range in size from .086 OD to .400 OD with capacitance
values from 5 pF to 1.2 microfarad. Designed for solder mount, these
hermetically sealed devices come in silver or gold finish for ease of
installation. They are readily available as C or L section filters in voltageratings of 50 VDC through 400 VDC as well as 125 VAC and current
ratings of 5 Amp through 15 Amp.
FILTER PINS ....PAGE 13
This unique product line provides the designer with solder mount,
environmentally sealed, PI type filters in voltage ratings of 50 VDC
through 300 VDC, current capacity of 10 Amps and a capacitance rangeof 5000 pF through .5 microfarad. The fundamental difference between
our filter pins and traditionally constructed units lies in the capacitor
used. We utilize a monolithic multiplayer discoidal capacitor as
opposed to a thin walled single layer tubular element. The discoidalcapacitor is inherently stronger, more rugged and far less susceptible
to thermal and mechanical stress.
EMI RFI FILTERPRODUCT GUIDE
-
7/21/2019 EMI Filters - Ceramic
3/81
ii
BOLT STYLE FILTER ......PAGE 16
This popular product line features C, L, and PI section filterswhich are hermetically or environmentally sealed. They are
available in gold, silver or tin plated bolt style cases in 0-80
thru 5/16 thread sizes. Custom configurations are also
available. The voltage ranges from 50 VDC to 500 VDC. DC or
low frequency current capacity is typically .5 Amp to 200 Amp.
BROAD BAND FILTERS ....PAGE 23
Broad Band Filters are a line of low pass filters available as single
element capacitors featuring insertion loss performance of 20db/decade, L section filters at 40db/decade or PI and T section filters at
60db/decade. Multiple L, PI, and T sections are available on a custom
basis. Voltage ratings from 50 VDC to 240 VAC and current ratings
of .10 Amp to 50 Amp are standard.
CUSTOM FILTER ASSEMBLIES ......PAGE 46
Special filter assemblies are custom designed to fulfill a wide
variety of high density packaging requirements. All phases of
electrical and mechanical design, fabrication and testing are
performed to meet the users overall requirements. Contact ourengineering department for further information on this custom
service.
DISCOIDAL CERAMIC CAPACITORS & CUSTOM CAPARRAYS ....PAGE 50
Discoidal feed-through capacitors are the basic element
in ceramic EMI/RFI filters. They are available in NPO, BX,
X7R, and Z5U temperature coefficients. Sizes range
from .040 OD to 1.100 OD with capacitance values
from < 10pF to 5 microfarad. Voltage ratings of 50 VDCto 500 VDC are available as standard product. The
Caparray is a custom designed line of multiple element
feed-through capacitors. Physical configurations are
offered in an almost infinite number of possibilities.
Consult our engineering staff for a customized solution
to your packaging problems.
M28861 CROSS REFERENCE ....PAGE 52
NEW PRODUCTS ........PAGE 57
-
7/21/2019 EMI Filters - Ceramic
4/81
Selecting an appropriate filter style and type is often a complex task involving many considerations and trade-
offs. Some of the factors that have a major impact on designers selections are:
1. Real Estate limitations (size, weight, mounting type).
2. Environmental conditions (moisture resistance, shock, vibration).
3. Electrical characteristics (voltage, current, capacitance, insertion loss).
1.) This catalog has been organized to provide the designer with a variety of military equivalent and industry
standard EMI filter sizes and mounting types. To facilitate location of a particular filter type, the parts have been
listed by size starting with miniature solder-in eyelet types and ending with relatively large screw-in broadband
types. Table 1, below, is a handy guide referencing appropriate catalog pages in respect to the filter type, reading
from left to right and with respect to the filter circuit style, reading from right to left.
TABLE 1
2.) Every filter in this catalog has been ruggedized and completely encapsulated resulting in an environmentally
resistant unit intended for Hi-Rel military and aerospace applications. All parts, either epoxy resin or hermetically
sealed devices, meet or exceed the applicable requirements of MIL-F-15733 and MIL-F-28861 specifications.
Individual test parameters per MIL-STD-202 for each family of parts can be found in the General Specifications
Table at the beginning of every catalog section.
EMI FILTER DESIGN GUIDE
FILTER
ST
Y
LE
DRAWINGSINSTALLATION
METHOD
BODYOUTSIDE
DIA.
THREAD SIZETYPICAL
LENGTH
TYPE OF
SEAL
PAGE
EYELET
SOLDER-IN
.086
.128
.165
.250
.400
N/A
N/A
N/AN/A
N/A
.500
.625
.650
.650
.700
EPOXY
EPOXY
EPOXYEPOXY
EPOXY
2-3
9
1011
12
C-L
C-L
C-LC-L
C-L
FILTER PINSOLDER-IN
.122
.138
.187
.240
N/AN/A
N/A
N/A
1.3501.360
1.480
1.500
EPOXYEPOXY
EPOXY
EPOXY
1515
15
15
BOLT
SCREW-IN
.070-.072
.095-.105
N/AN/A
N/AN/A
0-80 UNF2-56 UNC
4-40 UNC8-32 UNC
12-32 UNEF5/16-24 UNF
.25.500
.6001.200
1.2601.310
EPOXYEPOXY
EPOXYEPOXY OR
HERMETICALL SIZES
45-6
1819
20-2122
CC-L-
C-LC-L-
C-L-C-L-
BROADBAND
SCREW-IN
.240
.375
.400
.680
8-32 UNC
-28 UNF-28 UNF
5/16-24 UNF
.840
1.0801.130
1.600
HERMETIC
HERMETICHERMETIC
HERMETIC
25
26thru
45
C-L
C-L--TC-L-
C-L--T
F
I
LT
E
R
S
TY
L
E
-
7/21/2019 EMI Filters - Ceramic
5/81
iv
3.) Ensuring Electromagnetic Compatibility (EMC) between a variety of electric and electronic equipment and
systems in a modern world of sophisticated and intricate electronics has become increasingly important in order
to provide successful operation of different subsystems in the same electromagnetic environment.
Electromagnetic Interference (EMI) being either narrowband (unwanted disturbances present over a narrow range
of frequencies) or broadband (undesirable noise present over a wide range of frequencies) can be radiated,conducted or propagated by any combination of these two propagation modes. Common suppressing techniques
involve grounding, shielding, and filtering. To determine electrical properties of a filter it is necessary to define
quantitative limits for conducted and radiated interference and establish susceptibility levels for equipment that
comprise a system.
To achieve adequate suppression of the spurious noise, filter style or circuit schematic should be first chosen
following the rule of thumb of having the capacitor end of a filter facing the high impedance and the inductor end
facing the low impedance. Table 2 below illustrates the above circuit selection criteria.
The next step will require determination of the
working voltage, rated current, maximum DC
resistance, cut-off frequency and insertion loss.
When specifying working voltage and rated
current, any derating requirements should be
taken into consideration. Maximum allowable
voltage drop will usually govern maximum DCR of a
filter. The cut-off frequency is often selected one
decade above the frequency of a signal.
The insertion loss data throughout the catalog is
based on MIL-STD-220 and provide means of
comparison and testing only. IL performance of
any given filter could be quite different for systems
having actual source and load impedances other
than 50 Ohms.
To help the user get acquainted with this catalog,
every effort has been made to organize the data
sheets and list the parts in a logical order. Every
table starts at the top with lowest voltage/current
and consequently highest capacitance/insertion
loss characteristics parts. These are followed by
higher voltage and naturally lower capacitance and
insertion loss performance devices.
This catalog provides you with the most comprehensive and widely used selection of EMI filters. However, itrepresents only a cross-section of capabilities. Whether your application requires unique electrical
characteristics or customized mechanical configuration, there is a high probability that we will be able to satisfy
your specific needs without compromise.
EMI FILTER DESIGN GUIDE
TABLE 2
LOAD IMPEDANCE (Zi)LOW HIGH
SOURCEIMP
EDANCE(Zs)
HIGH
LOW
IN OUT
L-STYLE40dB/DECADE
IN OUT
DOUBLEL-STYLE80dB/DECADE
C-STYLE20dB/DECADE
PI-STYLE60dB/DECADE
DOUBLEPI-STYLE100dB/DECADE
INDUCTOR20dB/DECADE
DOUBLET-STYLE100dB/DECADE
T-STYLE60dB/DECADE
IN
IN
DOUBLEL-STYLE80dB/DECADE
OUT
L-STYLE40dB/DECADE
OUT
-
7/21/2019 EMI Filters - Ceramic
6/81
PA&E Filter Division, formerly, Ceramic Devices, Inc. (CDI), was founded in 1982 to provide filteringsolutions to electromagnetic interference (EMI) problems which plague manufacturers of high-
performance, high-reliability electronic systems.
EMI is an intermittent or continuous noise which is radiated or conducted into or out of electronic
equipment, disrupting the normal operation of electronic systems. Sources of EMI include broadcast
transmitters, motors, power supplies and microwave devices. High frequency EMI is often
catastrophically disruptive to sensitive electronic circuits and the characteristics of this noise can
seldom be predicted for the systems operating environment. Elimination of these undesirable signals
is usually accomplished during field testing of the system and hence solutions require creativity under
extreme time constraints. Designing EMI-free circuit housings including access and egress for pure
signal and power lines in military and aerospace electronics systems is usually accomplished usingcombinations of discoidal multilayer ceramic capacitors and ferrite inductors in a filter assembly. The
filter divisions engineering staff are experts in designing EMI filters for electronic circuits operating in
hostile EMI environments. The filter division is a military-qualified business whose growth has been
accomplished by quickly providing innovative solutions to EMI problems encountered by military and
aerospace users in the field. A fully integrated filter manufacturer, the filter division fabricates the
highest quality discoidal multilayer capacitors in their Wenatchee, Washington facilities. High volume
manufacturing of complex, multi-component filters to meet tough environmental and performance
specifications and subjecting the assemblies to military testing and screening requirements is routine
at PA&E.
QPL listed supplier of MIL-F-15733, EMI/RFI filters.
QPL listed supplier of MIL-F-28861, level B for ceramic feed-through filters and capacitors.
S level screening to MIL-F-28861 is available when specified. Qualified supplier on SSQ 21215, 21216, and 21218.
All devices meet or exceed the requirements of MIL-F-28861 and/or MIL-F-15733.
QC system complies with MIL-I-45208, MIL-STD-790, ISO 9001 and AS9000.
Current DSCC selected item drawings that list CDI as a source of supply are: 84080, 84081,
84082, 84083, 84084, 86131, and 88010.
Custom EMP and lightning protection devices to withstand 1500 volt surges, utilizing ceramic
capacitors, ferrites, and diodes.
Responsive design and prototype service available to meet your standard or custom
requirements. Engineers and buyers are encouraged to utilize PA&Es quick delivery capabilityfor both sample or production quantities.
FILTERDIVISION
-
7/21/2019 EMI Filters - Ceramic
7/81
2
ELECTRICAL SPECIFICATIONS1. Operating Temperature Range: -55C to + 125C
2. Voltage Rating: 50, 100, 200 VDC
3. Temperature Coefficient Characteristic: NPO & X7R
4. Capacitance Range:
-
7/21/2019 EMI Filters - Ceramic
8/81
FEATURES:
Ideal for microwave applications
Lower cost epoxy sealed
Ultra miniature size High cap value per unit volume
Gold or silver plating
Steel Case
ELECTRICAL SPECIFICATIONS1. Operating Temperature Range: -55C to + 125c
2. Voltage Rating: 50, 100, 200 VDC
3. Temperature Coefficient Characteristic: NPO & X7R
4. Capacitance Range:
-
7/21/2019 EMI Filters - Ceramic
9/81
4
FEATURES:
Ideal for microwave applications
Epoxy sealed C or L style filters
Ultra miniature size
High cap value per unit volume
Gold or silver plating
Steel Case
ELECTRICAL SPECIFICATIONS1. Operating Temperature Range: -55C to + 125C
2. Voltage Rating: 50, 100, 200 VDC
3. Temperature Coefficient Characteristic: NPO & X7R4. Capacitance Range:
-
7/21/2019 EMI Filters - Ceramic
10/81
FEATURES:
Ideal for microwave applications
Epoxy sealed C or L style filters
Ultra miniature size
High cap value per unit volume Gold or silver plating
Steel Case
ELECTRICAL SPECIFICATIONS1 Operating Temperature Range: -55C to + 125C
2. Voltage Rating: 50, 100, 200 VDC
3. Temperature Coefficient Characteristic: NPO & X7R
4. Capacitance Range:
-
7/21/2019 EMI Filters - Ceramic
11/81
6
ELECTRICAL SPECIFICATIONS1. Operating Temperature Range: -55C to + 125c
2. Voltage Rating: 50, 100, 200 VDC
3. Temperature Coefficient Characteristic: NPO & X7R
4. Capacitance Range:
-
7/21/2019 EMI Filters - Ceramic
12/81
FEATURES: Equivalent to MIL-F-28861/12 through /15.
Hermetically sealed at one end, epoxy at opposite.
Miniature size for optimum use of design space. Wide capacitance/voltage range.
High capacitance per unit volume.
Tin, gold, or silver plating.
APPLICATIONS:The feed-thru type of C section eyelet style filters are designed for solder-in bulkhead mounting to
suppress conducted interference on DC bias lines for RF oscillator and amplifier circuitry. These units are
hermetically sealed (glass to metal) at one end and epoxy sealed at the other end. A feed-thru filter consists of a
single capacitive element and is best suited for high source and load impedance systems when a moderate
attenuation slope of 20db/decade satisfies system insertion loss requirements.
The eyelet style L section filter offers the designer an option of having either high impedance or lowimpedance input depending on the orientation of the filter in the circuit. It is commonly used with an inductor
(ferrite bead) facing either low impedance source or low impedance load in order to create the impedance
mismatch which would produce the best insertion loss results. Effective filtering starts below 300 KHz and
continues through 10 GHz.
Solder
Capacitor
Lead
Filter Case
EpoxyGlassSeal
Hermetic Seal Eyelet C-Section Filter
Schematic
Solder
Capacitor
Lead
Filter Case
EpoxyGlassSeal
Hermetic Seal Eyelet L-Section Filter
Inductor
Schematic
EMI FILTERSC AND L TYPE
EYELET
-
7/21/2019 EMI Filters - Ceramic
13/81
8
GENERAL SPECIFICATIONS
Steel case only
INSTALLATION GUIDEIn order to reduce the possibility of damage as a result of thermal stress caused by the application of soldering heat, adhere to followingprocedure:
1) Preheat the part and the chassis to 125-140C for 5 minutes.
2) Use silver bearing solder preforms such as 60/38/2 % tin/lead/silver or 60/40 % tin/lead.3) Apply the heat in the immediate vicinity of the filter with sufficient magnitude to reflow the solder preform and only for the
minimum time required to make a good solder connection.
4) When using oven soldering method, the oven temperature should not exceed 260C and dwell time at temperature should be asshort as practical, consistent with good solder flow.
5) Allow the assembly to cool at the rate similar to that of the preheat operation.6) Avoid bending or flexing terminals at the point of exit from the glass or epoxy seal to preserve the integrity of the seal and/or
ceramic capacitor.7) Solder connections to the terminals should be performed with temperatures not exceeding 230C, placing a heat sink between
soldering point and filter body whenever possible.
EYELET EMI FILTERSC AND L TYPE
Capacitance / Tolerance: Measured @ 1 KHz and .1-1 Vrms, 25C / -0% +100%
Dissipation Factor: 2.5% max @ 1 KHz and .1-1 Vrms, 25C
Insulation Resistance: 100 Gor 1000 M- mF, whichever is less @ 25C, WVDC
Working Voltage: 50 VDC to 400 VDC
Dielectric Withstanding Voltage: 250 % of WVDC min. @ 25C for 51 sec, 50 mA max chg. Current
Volt-Temperature Limit: +10% -30% @ WVDC and -55C to +125C
Current Rating: 5 Amp through 15 Amp
DC Resistance: .01max.
Insertion Loss:Measured per Mil-STD-220, IL between any two adjacent specified frequency shall be that ofthe lower of the two frequencies in order to accommodate resonant dips.
Operating Temperature: -55C to +125C
Storage Temperature: -65C to +160C
Materials: Case Cold rolled steel per ASTM A-108
Terminals Iron-nickel alloy (alloy 52) per ASTM F-30
Finish: Case Gold plate per MIL-G-45204 Type II, Class I / silver optional
Terminals Gold plate per MIL-G-45204 Type II, Class I / silver optional
Applicable MIL Specifications: Mil-F-28861 / Mil-C-11015
Environmental Test Spec: Mil-STD-202
Thermal Shock: Method 107, Condition A except step 3 @ 125C
Salt Spray: Method 101, Condition B
Barometric Pressure: Method 105, Condition B
Resistance to Soldering Heat: Method 210, Condition B
Seal: Not ApplicableVibration: Method 204, Condition D
Shock: Method 213, Condition I
Terminal Strength: Method 211, Condition A
Solderability: Method 208
Life: Method 108, Condition D
-
7/21/2019 EMI Filters - Ceramic
14/81
FIGURE 1
FIGURE 2
NOTE: For glass seal at the flange end, change the first digit of thepart number from 1 to 5.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSC AND L TYPE.128 OD, 5 AMP
EYELET
Solder
Capacitor
Lead
Filter Case
Epoxy Glass
Seal
Hermetic Seal Eyelet L-Section Filter
Inductor
Schematic
FILTERDIVISION
PART NUMBERFIG.
WORKINGVOLTAGE
(VDC)
MINCAPpF
MINIMUM INSERTION LOSS (dB)
Per MIL-STD-220
1MHz
10MHz
100MHz
1GHz
10GHz
1115-1115-273** 1 50 27000 10 30 42 65 70
1115-1115-153** 1 50 15000 7 25 40 60 60
1115-1115-103** 1 50 10000 4 20 35 50 60
1125-1115-502** 1 100 5000 - 15 30 50 60
1125-1115-272** 1 100 2700 - 10 25 45 60
1135-1115-102** 1 200 1000 - 4 20 40 55
1135-1115-501** 1 200 500 - - 15 34 50
1135-1115-101** 1 200 100 - - 3 20 40
1135-1115-250** 1 200 25 - - - 10 25
1135-1115-100** 1 200 10 - - - 5 20
1135-1115-5R0** 1 200 5 - - - 2 15
1215-1A15-273** 2 50 27000 10 30 48 65 70
1215-1A15-153** 2 50 15000 7 25 45 60 60
1215-1A15-103** 2 50 10000 4 20 38 55 60
1225-1A15-502** 2 100 5000 - 15 30 50 60
1225-1A15-272** 2 100 2700 - 10 25 50 60
1235-1A15-102** 2 200 1000 - 4 20 45 55
1235-1A15-501** 2 200 500 - - 15 34 55
1235-1A15-101** 2 200 100 - - 3 20 40
1235-1A15-250** 2 200 25 - - - 20 25
1235-1A15-100** 2 200 10 - - - 15 20
1235-1A15-5R0** 2 200 5 - - - 5 15
.625 Ref.
.015
.025
.220
.280
.123.133 .151.161
.105
.115
GlassSeal
.028.032
Schematic
CCCC----SECTION FILTERSECTION FILTERSECTION FILTERSECTION FILTER SOLDER MOUNT
.715 Ref.
.015
.025
.220
.280
.123.133
.151.161
.195
.205
GlassSeal
.028.032
LLLL----SECTION FILTERSECTION FILTERSECTION FILTERSECTION FILTER Solder Mount
Schematic
-
7/21/2019 EMI Filters - Ceramic
15/81
10
FIGURE 3
FIGURE 4
NOTE: For glass seal at the flange end, change the first digit of the part number from 1 to 5.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EYELET EMI FILTERSC AND L TYPE.165 OD, 10 AMP
Solder
Capacitor
Lead
Filter Case
Epoxy GlassSeal
Hermetic Seal Eyelet C-Section Filter
Schematic
FILTER
DIVISIONPART NUMBER
FIG.
WORKING
VOLTAGE(VDC)
MINIMUM INSERTION LOSS (dB)
Per MIL-STD-220500KHz
1MHz
10MHz
100MHz
1GHz
10GHz
1116-S415-104** 3 50 100000 14 20 38 48 70 70
1116-S415-653** 3 50 65000 10 16 35 45 70 70
1126-S415-503** 3 100 50000 8 15 33 44 67 70
1126-S415-403** 3 100 40000 5 12 31 43 65 70
1126-S415-273** 3 100 27000 - 10 30 42 65 70
1126-S415-153** 3 100 15000 - 7 25 40 60 60
1136-S415-103** 3 200 10000 - 4 20 35 52 60
1136-S415-502** 3 200 5000 - - 15 34 50 60
1216-S715-104** 4 50 100000 14 20 38 52 70 70
1216-S715-653** 4 50 65000 10 16 36 51 70 70
1226-S715-503** 4 100 50000 8 15 34 50 70 70
1226-S715-403** 4 100 40000 5 12 33 49 65 70
1226-S715-273** 4 100 27000 - 10 30 48 65 70
1226-S715-153** 4 100 15000 - 7 25 45 60 60
1236-S715-103** 4 200 10000 - 4 20 38 55 60
1236-S715-502** 4 200 5000 - - 15 35 55 60
MIN
CAPpF
.650 Ref.
.020
.030
.220
.280
.160.170 .195.205
.145
.155
GlassSeal
.030.034
Schematic
C-SECTION FILTER Solder Mount
.750 Ref.
.020
.030
.220
.280
.160.170
.195.205
.245
.255
Glass
Seal
.030.034
L-SECTION FILTER- Solder Mount
Schematic
-
7/21/2019 EMI Filters - Ceramic
16/81
FIGURE 5
FIGURE 6
NOTE: For glass seal at the flange end, change the first digit of the partnumber from 1 to 5.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSC AND L TYPE.250 OD, 10 AMP
EYELET
Solder
Capacitor
Lead
Filter Case
Epoxy GlassSeal
Hermetic Seal Eyelet L-Section Filter
Inductor
Schematic
FILTERDIVISION
PART NUMBERFIG.
WORKINGVOLTAGE
(VDC)
MINCAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
500KHz
1MHz
10MHz
100MHz
1GHz
10GHz
1116-T415-394** 5 50 .39 21 31 43 55 70 70
1116-T415-204** 5 50 .2 18 28 40 52 70 70
1116-T415-154** 5 50 .15 17 24 38 50 70 70
1126-T415-104** 5 100 .1 14 20 38 48 70 70
1126-T415-753** 5 100 .075 12 18 37 46 70 70
1126-T415-503** 5 100 .05 8 15 35 44 70 70
1136-T415-273** 5 200 .027 4 10 30 42 65 70
1136-T415-223** 5 200 .022 2 8 26 40 58 70
1136-T415-153** 5 200 .015 - 7 25 40 55 60
1166-T415-103** 5 300 .01 - 4 20 35 52 60
1166-T415-502** 5 300 .05 - - 15 34 50 60
1216-T715-394** 6 50 .39 21 32 46 60 70 70
1216-T715-204** 6 50 .2 18 29 42 55 70 70
1216-T715-154** 6 50 .15 17 26 40 53 70 70
1226-T715-104** 6 100 .1 14 20 39 52 70 70
1226-T715-753** 6 100 .075 12 18 37 51 70 70
1226-T715-503** 6 100 .05 9 15 36 50 70 70
1236-T715-273** 6 200 .027 4 10 30 48 65 70
1236-T715-223** 6 200 .022 2 8 27 45 65 70
1236-T715-153** 6 200 .015 - 7 25 45 60 60
1266-T715-103** 6 300 .01 - 4 20 38 55 60
1233-T715-502** 6 300 .005 - - 15 34 50 60
FIGURE 5 Schematic
C-SECTION FILTER - Solder Mount
.650 Ref.
.220
.280
.145
.155.020.030 Glass
Seal
.285.285 .245
.255
.030.034
Schematic
L-SECTION FILTER- Solder Mount
.750 Ref..220.280
.245
.255.020.030 Glass
Seal.285
.285 .245.255
.030.034
-
7/21/2019 EMI Filters - Ceramic
17/81
12
FIGURE 7
FIGURE 8
NOTE: For glass seal at the flange end, change the first digit of the part number from 1 to 5.Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EYELET EMI FILTERSC AND L TYPE.400 OD, 15 AMP
Solder
Capacitor
Lead
Filter Case
Epoxy GlassSeal
Hermetic Seal Eyelet C-Section Filter
Schematic
Schematic
CCCC----SECTION FILTERSECTION FILTERSECTION FILTERSECTION FILTER Solder Mount
.700 Ref.
.220
.280
.020
.030.195.205
GlassSeal
.048.058
.445.455.395.405
Schematic
L-SECTION FILTER - Solder Mount
.800 Ref.
.220
.280
.020
.030
.295
.305
Glass
Seal
.048.058
.445.455
.395.405
FILTER
DIVISIONPART NUMBER
FIG.
WORKING
VOLTAGE(VDC)
MIN
CAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
500KHz
1MHz
10MHz
100MHz
1GHz
10GHz
1118-UA15-125** 7 50 1.2 33 37 52 70 70 70
1128-UA15-105** 7 70 1.0 31 40 48 64 70 70
1128-UA15-704** 7 100 .7 30 36 44 60 70 70
1128-UA15-504** 7 100 .5 26 34 42 58 70 70
1138-UA15-254** 7 200 .25 20 30 40 55 70 70
1138-UA15-154** 7 200 .15 17 24 38 50 70 70
1138-UA15-104** 7 200 .1 14 20 38 48 70 70
1148-UA15-753** 7 115 VAC .075 12 18 37 46 70 70
1148-UA15-503** 7 115 VAC .05 7 15 34 44 70 70
1158-UA15-403** 7 400 .04 6 12 31 43 65 70
1158-UA15-103** 7 400 .01 - 4 20 35 52 60
1218-UB15-125** 8 50 1.2 33 38 53 70 70 70
1218-UB15-105** 8 70 1.0 31 41 50 65 70 70
1228-UB15-704** 8 100 .7 30 38 46 62 70 70
1228-UB15-504** 8 100 .5 26 36 44 60 70 70
1238-UB15-254** 8 200 .25 20 30 42 56 70 70
1238-UB15-154** 8 200 .15 17 26 40 53 70 70
1238-UB15-104** 8 200 .10 14 20 39 52 70 70
1248-UB15-753** 8 115 VAC .075 12 18 37 51 70 70
1248-UB15-503** 8 115 VAC .05 7 15 34 50 70 70
1258-UB15-403** 8 400 .04 6 12 33 49 65 701258-UB15-103** 8 400 .01 - 4 20 38 65 60
-
7/21/2019 EMI Filters - Ceramic
18/81
FEATURES: Similar to MIL-F-15733/33 and /62.
Epoxy resin encapsulated.
Discoidal capacitor construction.
Superior resistance to mechanical/thermal stress.
Solder-in style.
Excellent input to output signal isolation.
APPLICATIONS:PA&Es filter pins are designed with discoidal capacitors utilizing highly reliable multi layer dielectric
construction in order to minimize the effect of mechanical/thermal stress during and after soldering installation.
The PI circuit contains two capacitive elements and one inductive element which will provide typical insertion
loss of 60 dB per decade. A PI filter is a symmetric filter that presents a low impedance to both source and load,
especially at high frequencies. It is best suited for systems where the source and load impedance are relatively
high and where no attenuation is allowed in the low pass band, but sharp roll-off is desired beyond the cut-off
frequency. Due to its multiple element construction, PI filters are also recommended for circuits where the
source and load impedances vary from low to high depending on the circuit functions. If one of the impedances
become low, the filter will function as an LC section and if both impedances get reduced, the PI filter will still
function as an L section. Typical of these applications are signal or pulse transmission lines found in
telecommunications, telemetry, and radar systems.
EMI FILTERSPI TYPE
FILTER PIN
Filter Pin - Pi-Section, Solder Mount, Epoxy Sealed
Schematic
Lead Inductor
Capacitor
EpoxyEpoxy
SolderSolder
Case
-
7/21/2019 EMI Filters - Ceramic
19/81
14
GENERAL SPECIFICATIONS
INSTALLATION GUIDEIn order to reduce the possibility of damage as a result of thermal stress caused by the application of soldering
heat, adhere to following procedure:
1) Preheat the part and the chassis to 125-140C for 5 minutes.
2) Use silver bearing solder preforms such as 60/38/2 % tin/lead/silver or 60/40 % tin/lead.
3) Apply the heat in the immediate vicinity of the filter with sufficient magnitude to reflow the solder
preform and only for the minimum time required to make a good solder connection.
4) When using oven soldering method, the oven temperature should not exceed 260C and dwell time attemperature should be as short as practical, consistent with good solder flow.
5) Allow the assembly to cool at the rate similar to that of the preheat operation.
6) Avoid bending or flexing terminals at the point of exit from the glass or epoxy seal to preserve the integrity
of the seal and/or ceramic capacitor.
7) Solder connections to the terminals should be performed with temperatures not exceeding 230C,
placing a heat sink between soldering point and filter body whenever possible.
FILTER PIN EMI FILTERSPI TYPE
Capacitance / Tolerance: Measured @ 1 KHz and .1-1 Vrms, 25C / -0% +100%
Dissipation Factor: 2.5% max @ 1 KHz and .1-1 Vrms, 25C
Insulation Resistance: 103Mor 1000 M- mF, whichever is less @ 25C, WVDC
Working Voltage: 50 VDC to 300 VDC
Dielectric Withstanding Voltage: 250 % of WVDC min. @ 25C for 51 sec, 50 mA max chg. Current
Volt-Temperature Limit: +10% -30% @ WVDC and -55C to +125C
Current Rating: 10 Amp
DC Resistance: .005 max.
Insertion Loss:
Measured per Mil-STD-220, IL between any two adjacent specified frequency
shall be that of the lower of the two frequencies in order to accommodate
resonant dips.
Operating Temperature: -55C to +125C
Storage Temperature: -65C to +150C
Materials: Case Brass, hard per QQ-B-626 (composition #22)Terminals Copper per ASTM B-170 / phosphor-bronze optional
Finish: Case Silver per QQ-S-365 / Gold Optional
Terminals Silver per QQ-S-365 / Gold Optional
Applicable MIL Specifications: Mil-F-15733
Environmental Test Spec: Mil-STD-202
Thermal Shock: Method 107, Condition A except step 3 @ 125C
Salt Spray: Method 101, Condition B
Barometric Pressure: Method 105, Condition B
Resistance to Soldering Heat: Method 210, Condition B
Seal: Not Applicable
Vibration: Method 204, Condition D
Shock: Method 213, Condition ITerminal Strength: Method 211, Condition A
Solderability: Method 208
Life: Method 108, Condition D
-
7/21/2019 EMI Filters - Ceramic
20/81
NOTE: .025 square lead available upon request.Tolerances: .010 and as noted.
Details subject to change without notice.** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSPI TYPE, 10 AMP, SOLDER
MOUNT, EPOXY SEALED
FILTER PIN
Filter Pin - Pi-Section, Solder Mount, Epoxy
Schematic
Lead Inductor
Capacitor
EpoxyEpoxy
SolderSolder
Case
.260
.090
.760.030
.590.030
.015
.132.122
.032.002
2 pl
.320.140
.820.030 .540.030
.015
.032.002
Epoxy Seal2 pl
.180 .138
.350 .130
.760.030
.650.030
.015
.202 .187
.032.002
Epoxy Seal2 pl
.375 .125
.875.030
.625.030
.015
.032.002
Epoxy Seal2 pl .265 .240
FILTERDIVISION
PART NUMBER
WORKINGVOLTAGE
(VDC)
MINCAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
1MHz
10MHz
100MHz
200MHz
1GHz
10GHz
6416-VS95-503** 50 .05 15 36 70 70 70 70
6416-VS95-363** 50 .036 12 30 65 70 70 70
6424-VS95-223** 100 .022 8 26 65 70 70 706426-VS95-153** 100 .015 - 20 60 70 70 70
6436-VS95-103** 200 .01 - 15 55 70 70 70
6436-VS95-502** 200 .005 - 10 48 65 70 70
6416-XE95-104** 50 .1 20 70 70 70 70 70
6416-XE95-503** 50 .05 15 36 70 70 70 70
6426-XE95-363** 100 .036 12 30 65 70 70 70
6426-XE95-223** 100 .022 8 26 65 70 70 70
6436-XE95-153** 200 .015 - 20 60 70 70 70
6436-XE95-103** 200 .01 - 15 55 70 70 70
6416-YT95-204** 50 .2 25 42 70 70 70 70
6426-YT95-104** 100 .1 20 40 70 70 70 70
6436-YT95-503** 200 .05 15 36 70 70 70 70
6436-YT95-363** 200 .036 12 30 65 70 70 70
6466-YT95-223** 300 .022 8 26 65 70 70 70
6466-YT95-103** 300 .01 - 15 55 70 70 70
6416-ZF95-504** 50 .5 34 44 70 70 70 70
6426-ZF95-204** 100 .2 25 42 70 70 70 70
6436-ZF95-104** 200 .1 20 40 70 70 70 70
6466-ZF95-503** 300 .05 15 36 70 70 70 70
6466-ZF95-363** 300 .036 12 30 65 70 70 70
6466-ZF95-223** 300 .022 8 26 65 70 70 70
-
7/21/2019 EMI Filters - Ceramic
21/81
16
FEATURES:
Equivalent to MIL-F-28861/6 through 10.
Epoxy and hermetically sealed versions.
Industry standard sizes.
Thread sizes ranging from 4-40 UNC to 5/16-24 UNF.
Extraordinary volumetric efficiency.
Highly reliable multiplayer capacitor contruction.
APPLICATIONS:Probably the most popular and widely used, the bolt style filter features C, L, or PI type circuits
in a variety of mechanical sizes, a wide range of capacitance values and ease of installation. All of
PA&Es bolt style filters, regardless of circuit type, utilize monolithic discoidal ceramic capacitor
construction in accordance with MIL-F-28861. Although with this design, the capacitors are located
away from the region of torque related stress and are mechanically isolated from each other, the
maximum recommended torque for each thread size should be carefully observed during theinstallation process. PA&E offers hermetically sealed versions for military and aerospace applications
where harsh environmental conditions exist. Source and load impedances of the system andattenuation gradient required will determine the style of the filter. The rule of thumb is to have a
capacitor inside the filter facing the high impedance and an inductor looking at the low impedance.
This impedance mismatch will produce the best insertion loss results.
BOLT EMI FILTERSC, L, AND PI TYPE
CapacitorInductor
Solder
Epoxy
Capacitor Case
ead
Potted Pi-Section Bolt Filter
Schematic
Epoxy
CapacitorInductor
Glass Seal
Solder
Glass SealEpoxy
Capacitor Case
Solder
Lead
Hermetic Pi-Section Bolt Filter
Schematic
-
7/21/2019 EMI Filters - Ceramic
22/81
GENERAL SPECIFICATIONSMarking per Mil-STD-130 Filter body size permitting: PA&E logo
PA&E part number
Date code
INSTALLATION GUIDEAlthough PA&E filters are rugged with excellent resistance to physical damage, good working practices should be
utilized in the installation process to avoid possible post-installation problems.1) Maximum recommended mounting torque should be applied to the nut only and observed as follows:
Thread size 0-80 2-56 4-40 UNC 8-32 UNC 12-32 UNC 1/4-28 UNF 5/16-24 UNF
Mount torque 10 in oz. 18 in oz. 3 in. lbs. 3-5 in. lbs. 6-8 in. lbs. 7-9 in. lbs. 7-9 in. lbs.
2) Avoid bending or flexing terminals at the point of exit from the glass or epoxy seal to preserve the integrity of
the seal and/or ceramic capacitor.3) Solder connections to the terminals should be performed with temperatures not exceeding 230C, placing a heat
sink between soldering point and filter body whenever possible.
EMI FILTERSC, L, AND PI TYPE
BOLT
Capacitance / Tolerance: Measured @ 1 KHz and .1-1 Vrms, 25C / -0% +100%
Dissipation Factor: 2.5% max @ 1 KHz and .1-1 Vrms, 25C
Insulation Resistance: 100 Gor 1000 M -mF, whichever is less @ 25C, WVDC
Working Voltage: 50 VDC to 500 VDC
Dielectric Withstanding Voltage: 250 % of WVDC min. @ 25C for 51 sec, 50 mA max chg. Current
Volt-Temperature Limit: +10% -30% @ WVDC and -55C to +125C
Current Rating: 5 Amp through 25 Amp
DC Resistance: .01max.
Insertion Loss:
Measured per Mil-STD-220, IL between any two adjacent specified
frequencies shall be that of the lower of the two frequencies in order
to accommodate resonant dips.
Operating Temperature: -55C to +125C
Storage Temperature: -65C to +150C
Materials: Case Brass, hard per QQ-B-626 (composition #22) / steel optional
Terminals Copper per ASTM B-170 / copper clad / steel optionalFinish: Case Silver per QQ-S-365 / Gold or Tin Optional
Terminals Silver per QQ-S-365 / Gold or Tin Optional
Applicable MIL Specifications: Mil-F-28861 / Mil-F-15733 / Mil-C-39014
Environmental Test Spec: Mil-STD-202
Thermal Shock: Method 107, Condition A except step 3 @ 125C
Immersion: Method 104, Condition A (Hermetic devices only)
Salt Spray: Method 101, Condition B
Moisture Resistance: Method 106 (Hermetic devices only)
Barometric Pressure: Method 105, Condition B
Resistance to Soldering Heat: Method 210, Condition B
Seal: Method 112, Condition A / Hermetically sealed pars only
Vibration: Method 204, Condition DShock: Method 213, Condition I
Terminal Strength: Method 211, Condition A
Solderability: Method 208
Life: Method 108, Condition D
-
7/21/2019 EMI Filters - Ceramic
23/81
18
*NOTE: For epoxy sealed parts, insert 5 for straight lead or 6 for turret lead.
Tolerances: .005 and as noted.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
BOLT EMI FILTERSC AND L TYPE
4-40 THREAD, 5 AMP
CapacitorInductor
Solder
Epoxy
Case
Lead
Potted L-Section Bolt Filter
Schematic
FILTERDIVISION
PART NUMBER
LDIM.
WORKINGVOLTAGE
(VDC)
MINCAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
1MHz
10MHz
100MHz
200MHz
1GHz
10GHz
2115-222*-104** .170 50 .1 20 40 50 56 70 70
2115-222*-753** .170 50 .075 18 38 48 54 70 70
2115-222*-503** .170 50 .05 15 33 44 50 67 70
2125-222*-453** .170 100 .045 12 31 43 49 65 70
2125-222*-273** .125 100 .027 10 30 39 45 65 70
2125-222*-153** .125 100 .015 7 25 37 43 60 70
2135-222*-103** .125 200 .01 4 21 35 42 55 70
2135-222*-502** .125 200 .005 - 15 34 41 50 55
2135-222*-272** .125 200 .0027 - 10 25 30 45 55
2135-222*-102** .125 200 .001 - 4 20 25 40 55
2135-222*-501** .125 200 500pF - - 15 20 34 50
2135-222*-101** .125 200 100pF - - 3 8 20 40
FILTER CIRCUIT L SCHEMATIC Threaded End
2215-222*-104** .170 50 .1 20 40 56 65 70 70
2215-222*-753** .170 50 .075 18 38 55 64 70 70
2215-222*-503** .170 50 .05 15 38 54 60 70 70
2225-222*-453** .170 100 .045 14 37 52 58 70 70
2225-222*-273** .125 100 .027 10 30 50 54 70 70
2225-222*-153** .125 100 .015 7 25 40 47 65 70
2235-222*-103** .125 200 .01 4 21 35 42 65 70
2235-222*-502** .125 200 .005 - 15 34 41 55 60
2235-222*-272** .125 200 .0027 - 10 28 35 50 60
2235-222*-102** .125 200 .001 - 4 20 27 45 55
2235-222*-501** .125 200 500pF - - 15 22 36 55
2235-222*-101** .125 200 100pF - - 3 8 20 40
FILTER CIRCUIT C SCHEMATIC
.154
.159
TurrentOptional .240
.031
.220.010
.360.031
L.010
.020.026.001
4-40 UNC-2A.030 max. imperfect thread
Epoxy Sealed 4-40 Bolt Style
.215
.225
.010
.020
.178
.188
.057
.067
.038
.052
4-40 UNC-2B
LOCKWASH HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
24/81
*NOTE: For hermetically sealed parts, insert 1. For epoxy sealed parts,insert 5 for straight lead or 6 for turret lead.
Tolerances: .010 and as noted.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSC, L, AND PI TYPE8-32 THREAD, 10 AMP
BOLT
CapacitorInductor
Glass Seal
Solder
Glass SealEpoxy
Case
Solder
Lead
Hermetic L-Section Bolt Filter
Schematic
L
WORKING
VOLTAGE(VDC)
MIN
CAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
1MHz
10MHz
100MHz
200MHz
1GHz
10GHz
FILTER CIRCUIT C SCHEMATIC
2116-324*-304** .170 50 .3 29 40 55 60 70 70
2116-324*-104** .170 50 .1 20 40 50 56 70 70
2126-324*-503** .093 100 .05 15 35 44 50 70 70
2126-324*-273** .093 100 .027 10 30 39 45 65 70
2136-324*-103** .093 200 .01 4 21 35 42 55 60
2136-324*-502** .093 200 .005 - 15 34 41 50 55
2136-324*-272** .093 200 .0027 - 10 25 30 45 55
2136-324*-102** .093 200 .001 - 4 20 25 40 50
FILTER CIRCUIT L SCHEMATICThreaded End
2216-324*-304** .170 50 .3 29 45 65 70 70 70
2216-324*-104** .170 50 .1 20 40 56 65 70 70
2226-324*-503** .093 100 .05 15 38 54 60 70 70
2226-324*-273** .093 100 .027 10 30 50 54 70 70
2236-324*-103** .093 200 .01 4 21 40 45 65 70
2236-324*-502** .093 200 .005 - 15 34 41 55 60
2236-324*-272** .093 200 .0027 - 10 28 35 50 60
2236-324*-102** .093 200 .001 - 4 20 27 45 55
FILTER CIRCUIT PI SCHEMATIC
2416-324*-503** .093 50 .05 15 35 68 70 70 70
2416-324*-323** .093 50 .032 12 30 65 70 70 70
2426-324*-203** .093 100 .02 8 24 62 70 70 70
2426-324*-153** .093 100 .02 8 24 62 70 70 70
2426-324*-153** .093 100 .015 - 12 60 70 70 70
2436-324*-103** .093 200 .01 - 11 55 70 70 70
2436-324*-502** .093 200 .005 - 10 48 65 70 70
2436-324*-202** .093 200 .002 - 8 42 58 70 70
FILTER
DIVISIONPART NUMBER
.187.010
.312.031
.266.010 .890
.031
L.010
.032.001
8-32 UNC-2A
Epoxy Sealed 8-32 Bolt Style
.040 max. imperfect threadundercut optional
TurrentOptional
.187.010
.312.031
.266.010
.890.031
.165.010
.032.001
8-32 UNC-2A
Hermetically Sealed 8-32 Bolt Style
.040 max. imperfect threadundercut optional
.275
.285
.010
.020.240.255
.063
.083
.038
.0528-32 UNC-2B
LOCKWASHER HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
25/81
20
Tolerances: .005 and as noted.
*NOTE: For hermetically sealed parts, insert 1. For epoxy sealed parts, insert 5 for straight lead or 6 for turretlead.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
BOLT EMI FILTERSC, L, AND PI TYPE12-32 THREAD, 10 AMP
CapacitorInductor
Solder
Epoxy
Case
Lead
Potted L-Section Bolt Filter
SchematicFILTER
DIVISIONPART NUMBER
LDIM.
WORKINGVOLTAGE
(VDC)
MINCAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
1MHz
10MHz
100MHz
200MHz
1GHz
10GHz
FILTER CIRCUIT C SCHEMATIC
2116-425*-504** .220 50 .5 34 42 60 65 70 70
2116-425*-304** .220 50 .3 29 40 55 60 70 70
2126-425*-204** .220 100 .2 26 39 52 55 70 70
2126-425*-104** .157 100 .1 20 38 48 53 70 70
2126-425*-503** .157 100 .05 15 35 44 50 70 70
2146-425*-273** .157 115 VAC .027 10 30 39 45 65 70
2146-425*-103** .157 115 VAC .01 4 21 35 42 55 60
2146-425*-502** .157 115 VAC .005 - 15 34 41 50 55
2146-425*-102** .157 115 VAC .001 - 4 20 25 40 50
FILTER CIRCUIT L SCHEMATIC Threaded End
2216-425*-504** .220 50 .5 34 45 65 70 70 70
2216-425*-304** .220 50 .3 39 45 65 70 70 70
2226-425*-154** .220 100 .15 23 40 58 65 70 70
2226-425*-104** .157 100 .1 20 40 56 65 70 70
2226-425*-503** .157 100 .05 15 36 54 60 70 702236-425*-273** .157 200 .027 10 30 50 54 70 70
2236-425*-103** .157 200 .01 4 21 40 45 65 70
2236-425*-502** .157 200 .005 - 15 34 41 55 60
2236-425*-102** .157 200 .001 - 4 20 27 45 55
2416-425*-124** .157 50 .12 21 40 70 70 70 70
2426-425*-753** .157 100 .075 18 38 70 70 70 70
2426-425*-503** .157 100 .05 15 36 70 70 70 70
2436-425*-273** .157 200 .027 10 30 65 70 70 70
2436-425*-123** .157 200 .012 - 16 65 65 70 70
2436-425*-502** .157 200 .005 - 14 50 65 70 70
FILTER CIRCUIT PI SCHEMATIC
.250.010
.343.031
.311.010
.921.031
L.010
.032.002
12-32 UNEF-2A
Epoxy Sealed 12-32 Bolt Style
.040 max. imperfect threadundercut optional
TurrentOptional
.250.010
.343.031
.311.010
.921.031
.220max
.032.002
12-32 UNEF-2A
Hermetically Sealed 12-32 Bolt Style
.040 max. imperfect threadundercut optional
.372
.383
.023
.031
.241
.250
.063
.083
.038
.05212-32 UNC-2B
LOCKWASHER HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
26/81
2
*NOTE: For hermetically sealed parts, insert 1 and for epoxy sealed partsinsert 5 for straight lead or 6 for turret lead.
Tolerances : .005 and as noted.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSC, L, AND PI TYPE
12-32 THREAD, REDUCED HEX, 10 AMPBOLT
CapacitorInductor
Solder
Epoxy
Case
Lead
Potted Reduced Hex L-Section Bolt Filter
Schematic
FILTERDIVISION
PART NUMBERL
WORKINGVOLTAGE
(VDC)
MINCAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
300KHz
1MHz
10MHz
100MHz
200MHz
1GHz
10GHz
FILTER CIRCUIT C SCHEMATIC
2116-325*-304** .220 50 .3 16 29 40 55 60 70 70
2116-325*-154** .220 50 .15 14 23 39 50 57 70 70
2116-325*-104** .157 50 .1 13 20 38 48 55 70 702126-325*-503** .157 100 .05 3 15 35 44 50 70 70
2126-325*-273** .157 100 .027 - 10 30 39 45 65 70
2136-325*-103** .157 200 .01 - 4 21 35 42 55 60
2136-325*-502** .157 200 .005 - - 15 34 41 50 55
2136-325*-272** .157 200 .0027 - - 10 25 30 45 55
FILTER CIRCUIT L SCHEMATICThreaded End
2216-325*-304** .220 50 .3 16 29 45 65 70 70 70
2216-325*-154** .220 50 .15 14 23 40 58 65 70 70
2216-325*-104** .157 50 .1 13 20 40 56 65 70 70
2226-325*-503** .157 100 .05 3 15 36 54 60 70 70
2226-325*-273** .157 100 .027 - 10 30 50 54 70 70
2236-325*-103** .157 200 .01 - 4 21 40 45 65 702236-325*-502** .157 200 .005 - - 15 34 41 55 60
2236-325*-272** .157 200 .0027 - - 10 28 35 50 60
2416-325*-104** .157 50 .1 13 20 40 70 70 70 70
2426-325*-503** .157 100 .05 3 15 36 70 70 70 70
2426-325*-323** .157 100 .032 - 12 32 65 70 70 70
2436-325*-273** .157 200 .027 - 10 30 65 70 70 70
2436-325*-203** .157 200 .02 - 8 24 65 70 70 70
2436-325*-123** .157 200 .012 - - 16 65 65 70 70
2436-325*-502** .157 200 .005 - - 14 50 65 70 70
2436-325*-202** .157 200 .002 - - 8 42 58 70 70
FILTER CIRCUIT PI SCHEMATIC
.187.010
.343.031
.311.010 .921.031
L.010
.032.002
12-32 UNC-2A
Epoxy Sealed Reduced Hex 12-32 Bolt Style
.040 max. imperfect threadundercut optional
TurrentOptional
.250.010
.250
.187.010
.343.031
.311.010
.921.031
.220.010
.032.002
12-32 UNC-2A
Hermetic Reduced Hex 12-32 Bolt Style
.040 max. imperfect threa
undercut optional.250.010
.250
.372
.383
.023
.031.241.250
.063
.083
.038
.05212-32 UNC-2B
LOCKWASHER HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
27/81
22
*NOTE: For hermetically sealed parts, insert 1 and for epoxy sealed parts insert 5 for straight lead.
Tolerances : .005 and as noted.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
BOLT EMI FILTERSC, L, AND PI TYPE
5/16-24 THREAD, 25 AMP
Glass
Seal EpoxyGlass
Seal
SolderSolder
Epoxy
Solder
CapacitorCase
Lead
FILTERDIVISION
PART NUMBER
WORKINGVOLTAGE
(VDC)
MINCAPF
MINIMUM INSERTION LOSS (dB)Per MIL-STD-220
300KHz
1MHz
10MHz
100MHz
200MHz
1GHz
10GHz
FILTER CIRCUIT C SCHEMATIC
211Z-528*-125** 50 1.2 31 40 50 70 70 70 70
212Z-528*-105** 70 1.0 30 40 48 70 70 70 70
212Z-528*-754** 100 .75 28 38 45 64 70 70 70
212Z-528*-504** 100 .5 23 34 42 60 65 70 70213Z-528*-254** 200 .25 16 29 40 55 60 70 70
214Z-528*-154** 125VAC .15 14 23 39 50 57 70 70
216Z-528*-104** 300 .1 13 20 38 48 55 70 70
218Z-528*-503** 500 .05 3 15 35 44 50 70 70
FILTER CIRCUIT L SCHEMATICThreaded End
221Z-528*-125** 50 1.2 31 40 50 70 70 70 70
222Z-528*-105** 70 1.0 30 40 48 70 70 70 70
222Z-528*-754** 100 .75 28 38 45 70 70 70 70
223Z-528*-504** 100 .5 23 34 44 65 70 70 70
223Z-528*-254** 200 .25 16 29 42 60 70 70 70
224Z-528*-154** 125VAC .15 14 23 40 58 65 70 70
226Z-528*-104** 300 .1 13 20 40 56 65 70 70228Z-528*-503** 500 .05 3 15 36 54 60 70 70
FILTER CIRCUIT PI SCHEMATIC
242Z-528*-504** 100 .5 23 34 44 70 70 70 70
242Z-528*-254** 100 .25 18 25 42 70 70 70 70
243Z-528*-104** 200 .1 14 20 40 70 70 70 70
244Z-528*-503** 125VAC .05 3 15 36 70 70 70 70
244Z-528*-223** 125VAC .022 - 10 26 68 70 70 70
245Z-528*-203** 240VAC .02 - 8 24 66 70 70 70
248Z-528*-123** 500 .012 - - 16 65 70 70 70
245Z-528*-602** 240VAC .006 - - 15 54 68 70 70
.375.010
.562.031
.437.010
.750.031
.250.020
.057.002
5/16-24 UNC-2A
Epoxy Sealed 516-24 Bolt Style
.030 max. imperfect threa
.062max
.243TurrentOptiona
.375.010
.562.031
.437
.010
.750.031
.250.020
.057.002
5/16-24 UNC-2A.030 max. imperfect thread
.062max
.243
Hermetic Sealed 516-24 Bolt Style
.420
.425
.01.027
.365
.377.088.098
.038
.052
516-24 UNC-2B
LOCKWASHER HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
28/81
-
7/21/2019 EMI Filters - Ceramic
29/81
24
GENERAL SPECIFICATIONS
Marking per Mil-STD-130 Filter body size permitting: PA&E logo
PA&E part number
Date code
INSTALLATION GUIDEAlthough PA&E filters are rugged with excellent resistance to physical damage, good working practices should be
utilized in the installation process to avoid possible post-installation problems.1) Maximum recommended mounting torque should be applied to the nut only and observed as follows:Thread size 0-80 2-56 4-40 UNC 8-32 UNC 12-32 UNC 1/4-28 UNF 5/16-24 UNFMount torque 10 in oz. 18 in oz. 3 in. lbs. 3-5 in. lbs. 6-8 in. lbs. 7-9 in. lbs. 7-9 in. lbs.
2) Avoid bending or flexing terminals at the point of exit from the glass or epoxy seal to preserve the integrity of
the seal and/or ceramic capacitor.
3) Solder connections to the terminals should be performed with temperatures not exceeding 230C, placing a
heat sink between soldering point and filter body whenever possible.
BROADBAND EMI FILTERSC TYPE
Capacitance / Tolerance: Measured @ 1 KHz and .1-1 Vrms, 25C / -0% +100%
Dissipation Factor: 2.5% max @ 1 KHz and .1-1 Vrms, 25C
Insulation Resistance: 100 Gor 1000 M -mF, whichever is less @ 25C, WVDC
Working Voltage: 50 VDC to 400 VDC and 125 to 240 VAC, 400Hz
Dielectric Withstanding Voltage: 250 % of WVDC min. @ 25C for 51 sec, 50 mA max chg. Current
Volt-Temperature Limit: +10% -30% @ WVDC and -55C to +125C
Current Rating: 10 Amp and 15 Amp
DC Resistance: .005max.
Insertion Loss:
Measured per Mil-STD-220, IL between any two adjacent specified frequencies
shall be that of the lower of the two frequencies in order to accommodate
resonant dips.
Operating Temperature: -55C to +125C
Storage Temperature: -65C to +150C
Materials: CaseBrass, hard per QQ-B-626 (composition #22) or CRS Iron-nickel alloy (alloy
52) per ASTM F-30Terminals
Finish: Case Silver per QQ-S-365 / Gold or Tin-Lead Optional
Terminals Silver per QQ-S-365 / Gold or Tin-Lead Optional
Applicable MIL Specifications: Mil-F-28861 / Mil-F-15733 / Mil-C-83439
Environmental Test Spec: Mil-STD-202
Thermal Shock: Method 107, Condition A except step 3 @ 125C
Immersion: Method 104, Condition A (Hermetic devices only)
Salt Spray: Method 101, Condition B
Moisture Resistance: Method 106 (Hermetic devices only)
Barometric Pressure: Method 105, Condition B
Resistance to Soldering Heat: Method 210, Condition B
Seal: Method 112, Condition A / Hermetically sealed parts onlyVibration: Method 204, Condition D
Shock: Method 213, Condition I
Terminal Strength: Method 211, Condition A
Solderability: Method 208
Life: Method 108, Condition D
-
7/21/2019 EMI Filters - Ceramic
30/81
2
TOLERANCES: .010 AND AS NOTED.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSC TYPE
BROADBAND
Hermetic C-Section Broadband Filter
Schematic
.187.005
.300Ref.
.500Max
.120Min.
.115
.050 or.050x.070 slot
.050 max imperfect threador undercut
8-32 UNC-2A.035 max imperfect thread
.135
.240
WORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc
(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3116-6643-394** 50 10 .39 2000 .005 3 12 15 21 32 40 58 70
3126-6643-254** 100 10 .25 3000 .005 - 10 13 19 30 40 56 70
3136-6643-104** 200 10 .1 5000 .005 - 5 8 13 22 38 50 70
3136-6643-753** 200 10 .075 10000 .005 - - - 8 18 37 46 65
3136-6643-503** 200 10 .05 10000 .005 - - - 3 15 34 45 60
3136-6643-253** 200 10 .025 10000 .005 - - - - 10 30 40 55
3166-6643-103** 300 10 .01 10000 .005 - - - - 4 20 35 50
PA&EFILTERS
PART NUMBER
Epoxy
Solder Capacitor
Epoxy
Lead
Case
Potted C-Section Broadband Filter
Schematic
-
7/21/2019 EMI Filters - Ceramic
31/81
26
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED
Details subject to change without notice.** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
BROADBAND EMI FILTERSC TYPE
Epoxy Seal C-Section Broadband Filter
Schematic
.187*.005 .150
Ref.
.180
Max.
.200
.375
.040
.325 Max.
.060 Ref.
(.035 max imperfect
thread)
14-28 UNF-2A .050 max imperfect thread
or undercut
PA&EFILTERS
PART NUMBER
WORKINGVOLTAGE
(VDC)
MINCAP(F)
MINIR
(M)
MAXRdc
(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3118-7466-145** 50 15 1.4 500 .005 15 25 28 34 42 44 70 70
3118-7466-125** 50 15 1.2 500 .005 13 23 26 31 40 42 70 70
3128-7466-754** 70 15 .75 1000 .005 8 19 22 28 38 40 64 703128-7466-504** 70 15 .5 2000 .005 4 14 17 23 34 40 60 70
3128-7466-304** 100 15 .3 3000 .005 - 12 15 20 30 40 56 70
3128-7466-154** 100 15 .15 5000 .005 - 6 9 14 25 38 52 70
3138-7466-104** 200 15 .1 10000 .005 - 5 8 13 22 38 50 70
3138-7466-503** 200 15 .05 10000 .005 - - - 3 15 34 45 60
3168-7466-253** 300 15 .025 10000 .005 - - - - 10 30 40 55
I dc(A)
Hermetic C-Section Broadband Filter
Schematic
.187*.005 .170
Ref..345 Max
.145Min.
.115
.050 or.050x.070slot
.200
.375 (.035 max imperfectthread)
14-28 UNF-2A .050 max imperfect thread
or undercut
WORKING
VOLTAGE(VDC)
I dc(A)
MIN
CAP(F)
MIN
IR(M)
MAX
Rdc(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3118-7563-145** 50 15 1.4 500 .005 15 25 28 34 42 44 70 70
3118-7563-125** 50 15 1.2 500 .005 13 23 26 31 40 42 70 70
3128-7563-754** 70 15 .75 1000 .005 8 19 22 28 38 40 64 70
3128-7563-504** 70 15 .5 2000 .005 4 14 17 23 34 40 60 70
3128-7563-304** 100 15 .3 3000 .005 - 12 15 20 30 40 56 703128-7563-154** 100 15 .15 5000 .005 - 6 9 14 25 38 52 70
3138-7563-104** 200 15 .1 10000 .005 - 5 8 13 22 38 50 70
3138-7563-503** 200 15 .05 10000 .005 - - - 3 15 34 45 60
3168-7563-253** 300 15 .025 10000 .005 - - - - 10 30 40 55
PA&E
FILTERSPART NUMBER
-
7/21/2019 EMI Filters - Ceramic
32/81
2
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSC TYPE
BROADBAND
Terminal
GlassSeal
Solder Capacitor
Epoxy
Epoxy
Solder
GlassSeal
Solder
Case
Hermetic C-Section Broadband Filter
Schematic
Hermetic C-Section Broadband Filter
Schematic
.187*.005 .190
Max.
L
.145.045
.115
.050 or
slot.200
.375
14-28 UNF-2A(.035 max imperfect
thread)
thread or undercut
L
MAX(in.)
WORKING
VOLTAGE(VDC)
I dc
(A)
MIN
CAP(F)
MIN
IR(M)
MAX
Rdc(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3118-7863-405** .730 50 15 4.0 100 .005 22 32 36 42 50 60 70 70
3118-7863-285** .530 50 15 2.8 300 .005 20 30 34 40 45 54 70 70
3118-7863-215** .530 50 15 2.1 300 .005 17 27 31 37 45 48 70 70
3118-7863-145** .410 50 15 1.4 500 .005 15 25 28 34 42 44 70 70
3128-7863-125** .410 100 15 1.2 500 .005 13 23 26 31 40 42 70 70
3128-7863-754** .410 100 15 .75 1000 .005 8 19 22 28 38 40 64 70
3138-7863-504** .410 200 15 .5 2000 .005 4 14 17 23 34 40 60 70
3138-7863-304** .410 200 15 .3 3000 .005 - 12 15 20 30 40 56 70
3148-7863-154** .410 115VAC 15 .15 5000 .005 - 6 9 14 25 38 52 70
PA&E
FILTERSPART NUMBER
-
7/21/2019 EMI Filters - Ceramic
33/81
28
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
BROADBAND EMI FILTERSC TYPE
Hermetic C-Section Broadband Filter
Schematic
.187*.005 .120
Min..410max.
.145.045
.115
.070 or.050x.070slot
.200
.410 14-28 UNF-2A(.035 max imperfectthread)
.050 max imperfect threador undercut
LMAX(in.)
WORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc
(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3118-8763-125** .410 50 15 1.2 500 .005 13 23 26 31 40 50 70 70
3128-8763-704** .410 70 15 .7 1000 .005 8 19 22 28 38 45 64 70
3128-8763-454** .410 100 15 .45 2000 .005 4 14 17 23 34 42 60 70
3138-8763-254** .410 150 15 .25 4000 .005 - 9 12 18 29 40 56 70
3148-8763-154** .410 125VAC 15 .15 5000 .005 - 6 9 14 25 38 52 70
3168-8763-104** .410 300 15 .1 7000 .005 - 5 8 13 22 38 50 70
PA&EFILTERS
PART NUMBER
Hermetic C-Section Broadband Filter
Schematic
.312.010.290Max.
L
.120
.070 or.062x.125slot
.250
.690
.620Max.
516-24 UNF-2A
(.035 max imperfectthread)
.050 max imperfect threador undercut
LMAX(in.)
WORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc
(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3118-9E83-955** .750 50 15 9.5 100 .005 30 40 45 50 60 70 70 70
3118-9C83-475** .650 50 15 4.7 100 .005 25 35 40 45 55 65 70 70
3128-9C83-285** .650 100 15 2.8 600 .005 20 30 34 40 48 60 70 70
3138-9C83-145** .650 200 15 1.4 500 .005 15 25 28 34 42 52 70 70
3168-9C83-125** .650 300 15 1.2 500 .005 13 23 26 321 40 50 70 70
3168-9C83-904** .650 300 15 .9 1000 .005 10 21 24 30 39 47 66 70
3168-9C83-754** .650 300 15 .75 1000 .005 8 19 22 28 38 45 64 70
3108-9C83-454** .650 400 15 .45 2000 .005 4 14 17 23 34 42 60 70
3148-9C83-304** .650 115VAC 15 .3 3000 .005 - 12 15 20 30 40 56 70
3158-9C83-154** .650 240VAC 15 .15 5000 .005 - 6 9 14 25 38 52 70
PA&EFILTERS
PART NUMBER
-
7/21/2019 EMI Filters - Ceramic
34/81
2
FEATURES: QPL to MIL-F-28861/2.
Designed to meet or exceed MIL-F-15733 requirements.
Hermetically sealed components.
Variety of capacitance and inductance values.
Extremely reliable.
All hardware supplied.
APPLICATIONS:An L style filter is a two element filtering device consisting of a capacitor and an inductor. The inductive
element is a wound torroidal inductor for applications up to 5 amps. For higher current applications ferrite
beads are used. This type of filter will provide the user with approximately 40dB/decade insertion loss
performance over the frequency range of 30 KHz to 10 GHz. An L section is designed for use in an
unbalanced system where either low source or low load impedance exists. The orientation of the inductive
end of the filter in the circuit is essential for the best insertion loss results. The rule of thumb is to have the
inductor facing either low source or low load impedance (typically less than 10.) to create optimum
impedance mismatch between the circuit and the filter. To facilitate this task, each L section can be
ordered with the capacitor at the threaded end (L2) or the inductor at the threaded end (L1).
EMI FILTERSL TYPE
BROADBAND
Hermetic Low Current L-Section
Broadband Filter
Schematic -L2
GlassSeal
Terminal
CapacitorSolderGlassSeal
EpoxyEpoxy
Case
Lead
Inductor
SolderSolder
Terminal
GlassSeal
Solder
Capacitor
Epoxy
Inductor
Solder
Glass
Seal
Solder
Case
Hermetic High Current L-Section
Broadband Filter
Epoxy
Schematic L1
-
7/21/2019 EMI Filters - Ceramic
35/81
-
7/21/2019 EMI Filters - Ceramic
36/81
3
TOLERANCES: .010 AND AS NOTED.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSL TYPE
BROADBAND
Terminal
GlassSeal
Solder Capacitor
EpoxyInductor
Solder
GlassSeal
Solder
Case
Hermetic High Current L-Section
Broadband Filter
Epoxy
Schematic - L1
Hermetic L-Section Broadband Filter
.187.005
(.300).500Max
.150Max.
.115
.050 or.050x.070 slot
.050 max imperfect threador undercut
8-32 UNC-2A
.135
.240
Schematic - L1
(.035 max
imperfect thread)
WORKING
VOLTAGE(VDC)
I dc(A)
MIN
CAP(F)
MIN
IR(M)
MAX
Rdc(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3216-6643-394** 50 10 .39 2000 .005 3 12 15 21 32 44 60 70
3226-6643-254** 100 10 .25 3000 .005 - 10 13 19 30 40 56 70
3236-6643-104** 200 10 .1 5000 .005 - 5 6 13 22 39 52 70
3236-6643-753** 200 10 .075 10000 .005 - - - 8 18 37 50 70
3236-6643-503** 200 10 .05 10000 .005 - - - 3 15 34 48 65
3236-6643-253** 200 10 .025 10000 .005 - - - - 10 30 45 60
3266-6643-103** 300 10 .01 10000 .005 - - - - 2 20 38 55
PA&E
FILTERSPART NUMBER
-
7/21/2019 EMI Filters - Ceramic
37/81
-
7/21/2019 EMI Filters - Ceramic
38/81
3
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED.
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSL TYPE
BROADBAND
Terminal
GlassSeal
Solder Capacitor
Epoxy
Inductor
Solder
GlassSeal
Solder
Case
Hermetic High Current L-Section
Broadband Filter
Epoxy
Schematic L1
Hermetic High Current L-SectionBroadband Filter
.187*.005
.190Max.
L
.150Max.
.115
.050 or.050x.070slot
.200
.375
Schematic - L1
14-28 UNF-2A(.035 max imperfect
thread)
.050 max imperfect threador undercut
L
MAX(in.)
WORKING
VOLTAGE(VDC)
I dc(A)
MIN
CAP(F)
MIN
IR(M)
MAX
Rdc(M)
MINIMUM INSERTION LOSS (dB)
Per Mil-STD-22030
KHz100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3218-7G63-405** .730 50 15 4.0 100 .005 22 32 36 42 50 60 70 70
3218-7C63-285** .530 50 15 2.8 300 .005 20 30 34 40 49 60 70 70
3218-7C63-215** .530 50 15 2.1 300 .005 17 27 31 37 45 56 70 70
3218-7763-145** .410 50 15 1.4 500 .005 15 25 28 34 42 52 70 70
3228-7763-125** .410 100 15 1.2 500 .005 13 23 26 31 40 50 70 70
3228-7763-754** .410 100 15 .75 1000 .005 8 19 22 28 38 45 64 70
3238-7763-504** .410 200 15 .5 2000 .005 4 14 17 23 34 42 60 70
3238-7763-304** .410 200 15 .3 3000 .005 - 12 15 20 30 40 56 70
3248-7763-154** .410 115VAC 15 .15 5000 .005 - 6 9 14 25 38 52 70
PA&E
FILTERSPART NUMBER
-
7/21/2019 EMI Filters - Ceramic
39/81
34
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED
FOR .312 THREAD LENGTH, SUBSTITUTE 7 FOR 6 IN THE SEVENTH DIGIT OF THE PART NUMBER
TOLERANCES: .010 AND AS NOTED
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
BROADBAND EMI FILTERSL TYPE
Hermetic High Current L-SectionBroadband Filter
.187*.005
.190Max.
L
.150Max.
.115
.050 or
.050x.070slot
.200
.410
Schematic - L1
14-28 UNF-2A(.035 max imperfect
thread)
.050 max imperfect threador undercut
LMAX(in.)
WORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc
(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3218-8763-125** .410 50 15 1.2 500 .005 13 23 26 31 40 50 70 70
3228-8763-704** .410 70 15 .7 1000 .005 8 19 22 28 38 45 64 70
3228-8763-454** .410 100 15 .45 2000 .005 4 14 17 23 34 42 60 70
3238-8763-254** .410 150 15 .25 4000 .005 - 9 12 18 29 40 56 70
3248-8763-154** .410 125VAC 15 .15 5000 .005 - 6 9 14 25 38 52 70
3268-8763-104** .410 300 15 .1 7000 .005 - 5 8 13 22 38 50 70
3208-8763-503** .410 400 15 .05 10000 .005 - - - 3 15 34 45 60
PA&EFILTERS
PART NUMBER
.312.010
.290Max.
L
.120
.070 or.062x.125slot
.062 max imperfect threador undercut
.250
.690 Max.516-24 UNF-2A
.620Max.
Hermetic High Current L-SectionBroadband Filter
Schematic - L1
(.035 max imperfectthread
L
MAX(in.)
WORKING
VOLTAGE(VDC)
I dc(A)
MIN
CAP(F)
MIN
IR(M)
MAX
Rdc(M)
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3218-9E83-475** .750 50 15 4.7 100 .005 25 36 40 45 55 65 70 70
3228-9C83-285** .650 100 15 2.8 300 .005 20 30 34 40 49 60 70 70
3238-9C83-145** .650 200 15 1.4 500 .005 15 25 28 34 42 52 70 70
3268-9C83-125** .650 300 15 1.2 500 .005 13 23 26 31 40 50 70 70
3268-9C83-904** .650 300 15 .9 1000 .005 10 21 24 30 39 47 66 70
3268-9C83-754** .650 300 15 .75 1000 .005 8 19 22 28 38 45 64 703208-9C83-454** .650 400 15 .45 2000 .005 4 14 17 23 34 42 60 70
3248-9C83-304** .650 125VAC 15 .3 3000 .005 - 12 15 20 30 40 56 70
3258-9C83-154** .650 240VAC 15 .15 5000 .005 - 6 9 14 25 38 52 70
PA&E
FILTERSPART NUMBER
-
7/21/2019 EMI Filters - Ceramic
40/81
-
7/21/2019 EMI Filters - Ceramic
41/81
36
Details subject to change without notice.
** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
NOTE: For case style Figure 1, use 7 in the fifth place of the part number.For case style Figure 2, use 8 in the fifth place of the part number.
* For L1 circuit, substitute 2 for 3 in the second digit of the part number.
** For .312 thread length, substitute 7 for 6 in the seventh digit of the part number.
BROADBAND EMI FILTERSL TYPEHermetic Low Current L-Section
Broadband Filter
Schematic -L2
GlassSeal
Terminal
CapacitorSolder
GlassSeal
Epoxy
Epoxy
Case
Lead
Inductor
SolderSolder
L
MAX(in.)
*CIRCUIT
WORKING
VOLTAGE(VDC)
I dc(A)
MIN
CAP(F)
MIN
IR(M)
MAX
Rdc()
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
333T-7K63-254** .793 L2 150 .1 .25 2000 1.7 10 30 37 49 58 60 60 70
333V-7K63-254** .793 L2 150 .3 .25 2000 .77 6 23 29 42 58 60 60 70
3332-7K63-254** .793 L2 150 .5 .25 2000 .36 - 18 24 37 57 60 60 70
3333-7K63-254** .793 L2 150 1 .25 2000 .14 - 10 14 24 46 60 60 70
3334-7K63-254** .793 L2 150 3 .25 2000 .05 - 9 13 18 34 60 60 70
3335-7K63-254** .793 L2 150 5 .25 2000 .015 - 6 10 18 30 60 60 70
334T-7K63-154** .793 L2 125VAC .1 .15 3000 5 12 32 40 52 60 60 60 70
3341-7K63-154** .793 L2 125VAC .25 .15 3000 1.5 - 20 26 38 58 60 60 70
3342-7K63-154** .793 L2 125VAC .5 .15 3000 .6 - 14 20 32 52 60 60 70
3343-7K63-154** .793 L2 125VAC 1 .15 3000 .25 - 6 11 22 43 60 60 70
3344-7K63-154** .793 L2 125VAC 3 .15 3000 .05 - 3 6 14 28 58 60 70
3345-7K63-154** .793 L2 125VAC 5 .15 3000 .015 - 3 6 12 24 53 55 70
3346-7K63-154** .793 L2 125VAC 10 .15 3000 .005 - 7 11 15 24 40 60 70
PA&E
FILTERSPART NUMBER
Hermetic Low Current L-SectionBroadband Filter
.005.145.045
L
.145.045
.115.050 or
.050x.070slot
.050 max imperfect threador undercut
.200
.410 -28 UNF-2A
Figure 2
(.035 max imperfectthread)
.187**
Hermetic Low Current L-Section Broadband Filter
.187**.005
.190Max
L
.150Max.
.115.050 or.050x.070slot
.050 max imperfect threador undercut
.200
.375 -28 UNF-2A
Figure 1
thread)(.035 max imperfect
-
7/21/2019 EMI Filters - Ceramic
42/81
3
Details subject to change without notice.** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
* For L1 circuit, substitute 2 for 3 in the second digit of the part number.
EMI FILTERSL TYPE
BROADBAND
Hermetic Low Current L-Section
Broadband Filter
Schematic -L1
GlassSeal
Terminal
CapacitorSolder
GlassSeal
EpoxyEpoxy
CaseLead
Inductor
SolderSolder
LMAX(in.)
*CIRCUITWORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc()
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3312-9983-285** 1.060 L2 50 .5 2.8 200 .3 26 46 53 64 70 70 70 70
3313-9983-285** 1.060 L2 50 1 2.8 200 .21 24 43 50 61 70 70 70 70
3314-9983-285** 1.060 L2 50 3 2.8 200 .03 21 32 35 43 61 70 70 70
3315-9983-285** 1.060 L2 50 5 2.8 200 .015 21 31 34 40 52 70 70 70
3316-9983-285** 1.060 L2 50 10 2.8 200 .005 21 30 34 40 50 65 70 70
331Z-9983-285** 1.060 L2 50 25 2.8 200 .005 20 30 34 40 50 64 70 70
3322-9H83-145** .890 L2 100 .5 1.4 500 .3 20 40 46 58 70 70 70 703323-9H83-145** .890 L2 100 1 1.4 500 .21 18 37 44 55 70 70 70 70
3324-9H63-145** .890 L2 100 3 1.4 500 .03 15 26 30 37 55 70 70 70
3325-9H83-145** .890 L2 100 5 1.4 500 .015 15 25 28 34 46 70 70 70
3326-9H83-145** .890 L2 100 10 1.4 500 .005 15 24 28 34 44 60 70 70
332Z-9H83-145** .890 L2 100 25 1.4 500 .005 15 23 26 32 42 58 70 70
3332-9H83-504** .890 L2 200 .5 .5 1000 .3 10 30 37 48 68 70 70 70
3333-9H83-504** .890 L2 200 1 .5 1000 .21 8 27 34 45 65 70 70 70
3334-9H83-504** .890 L2 200 3 .5 1000 .03 6 16 19 27 45 70 70 70
3335-9H83-504** .890 L2 200 5 .5 1000 .015 6 15 18 25 36 65 70 70
3336-9H83-504** .890 L2 200 10 .5 1000 .005 6 14 17 24 34 50 65 70
333Z-9H83-504** .890 L2 200 25 .5 1000 .005 6 13 16 23 34 50 65 70
3342-9983-304** 1.060 L2 125VAC .5 .3 2000 .33 6 22 29 41 62 70 70 70
3343-9983-304** 1.060 L2 125VAC 1 .3 2000 .15 - 17 23 35 56 70 70 70
3344-9983-304** 1.060 L2 125VAC 3 .3 2000 .026 - 11 15 22 40 70 70 70
3345-9983-304** 1.060 L2 125VAC 5 .3 2000 .015 - 11 14 20 32 68 70 70
3346-9983-304** 1.060 L2 125VAC 10 .3 2000 .008 - 11 14 20 30 59 70 70
334Z-9983-304** 1.060 L2 125VAC 25 .3 2000 .005 - 10 13 20 30 45 60 70
3352-9983-154** 1.060 L2 240VAC .5 .15 3000 .33 - 16 23 35 56 70 70 70
3353-9983-154** 1.060 L2 240VAC 1 .15 3000 .15 - 10 17 29 50 70 70 70
3354-9083-154** 1.060 L2 240VAC 3 .15 3000 .026 - 5 9 17 34 70 70 70
3355-9983-154** 1.060 L2 240VAC 5 .15 3000 .015 - 5 8 14 26 62 70 70
3356-9983-154** 1.060 L2 240VAC 10 .15 3000 .008 - 5 8 14 23 51 70 70
335Z-9983-154** 1.060 L2 240VAC 25 .15 3000 .005 - 5 7 13 22 49 60 70
PA&EFILTERS
PART NUMBER
Hermetic Low Current L-SectionBroadband Filter
.312 .290maxL
.220max.
.120.062x.125slot
.062 max imperfect threador undercut
.250
.6905
16-24 UNF-2A
(.035 max
imperfect
.420
.440
.015
.025
.365
.385
.088
.098
.040
.050
516
-24 UNF-2B
LOCKWASHER HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
43/81
-
7/21/2019 EMI Filters - Ceramic
44/81
3
GENERAL SPECIFICATIONS:
Marking per Mil-STD-130 Filter body size permitting: PA&E logo
PA&E part number
Date code
INSTALLATION GUIDEAlthough PA&E filters are rugged with excellent resistance to physical damage, good working practices should be
utilized in the installation process to avoid possible post-installation problems.
1) Maximum recommended mounting torque should be applied to the nut only and observed as follows:Thread size 0-80 2-56 4-40 UNC 8-32 UNC 12-32 UNC 1/4-28 UNF 5/16-24 UNFMount torque 10 in oz. 18 in oz. 3 in. lbs. 3-5 in. lbs. 6-8 in. lbs. 7-9 in. lbs. 7-9 in. lbs.
2) Avoid bending or flexing terminals at the point of exit from the glass or epoxy seal to preserve the integrity of
the seal and/or ceramic capacitor.
3) Solder connections to the terminals should be performed with temperatures not exceeding 230C, placing a
heat sink between soldering point and filter body whenever possible.
EMI FILTERS
PI TYPEBROADBAND
Capacitance / Tolerance: Measured @ 1 KHz and .1-1 Vrms, 25C / -0% +100%
Dissipation Factor: 2.5% max @ 1 KHz and .1-1 Vrms, 25C
Insulation Resistance: 10 Gmin or 1000 M -mF, whichever is less @ 25C, WVDCWorking Voltage: 50 VDC to 240 VAC
Dielectric Withstanding Voltage: 250 % of WVDC min. @ 25C for 51 sec, 50 mA max chg. Current
Volt-Temperature Limit: +10% -30% @ WVDC and -55C to +125C
Current Rating: .25 Amp through 10 Amp
DC Resistance: .005through 1.7
Insertion Loss:
Measured per Mil-STD-220, IL between any two adjacent specified
frequencies shall be that of the lower of the two frequencies in order
to accommodate resonant dips.
Operating Temperature: -55C to +125C
Storage Temperature: -65C to +160C
Materials: Case
TerminalsFinish: Case Tin/Lead per MIL-T-10727 / Gold or Silver Optional
Terminals Tin/Lead per MIL-T-10727 / Gold or Silver Optional
Applicable MIL Specifications: Mil-F-28861 / Mil-F-15733
Environmental Test Spec: Mil-STD-202
Thermal Shock: Method 107, Condition A except step 3 @ 125C
Immersion: Method 104, Condition A
Salt Spray: Method 101, Condition B
Moisture Resistance: Method 106
Barometric Pressure: Method 105, Condition B
Resistance to Soldering Heat: Method 210, Condition B
Seal: Method 112, Condition A
Vibration: Method 204, Condition D
Shock: Method 213, Condition I
Terminal Strength: Method 211, Condition A
Solderability: Method 208
Life: Method 108, Condition D
Brass, hard per QQ-B-626 (composition #22)
Iron-nickel alloy (alloy 52) per ASTM F-30
-
7/21/2019 EMI Filters - Ceramic
45/81
40
Details subject to change without notice.** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 48 TO COMPLETE THE NUMBERS.NOTE: For case style Figure 1, use 7 in the fifth place of the part number. For case style Figure 2, use 8 in the fifth
place of the part number. * For .312 thread length, substitute 7 for 6 in the seventh digit of the part number.
Tolerances: .10 and as noted.
BROADBAND EMI FILTERSPI TYPE
Hermetic Low Current Pi-Section
Broadband Filter
Schematic
GlassSeal
Capacitor
GlassSeal
Epoxy
CaseLead
Inductor
SolderSolder
Terminal
Solder
Solder
PA&EFILTERS
PART NUMBER
WORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc()
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3412-7K63-285** .793 50 .5 2.8 200 .6 33 65 76 80 80 80 80 80
3413-7K63-285** .793 50 1 2.8 200 .25 20 55 66 80 80 80 80 80
3414-7K63-285** .793 50 3 2.8 200 .05 - 31 42 63 80 80 80 80
3415-7K63-285** .793 50 5 2.8 200 .015 - 15 37 51 78 80 80 80
3416-7K63-285** .793 50 10 2.8 200 .005 21 30 34 40 50 68 80
342T-7K63-145** .793 70 .1 1.4 500 1.7 34 67 77 80 80 80 80 80
342V-7K63-145** .793 70 .3 1.4 500 .75 27 60 71 80 80 80 80 80
3422-7K63-145** .793 70 .5 1.4 500 .36 19 54 65 78 80 80 80 803423-7K63-145** .793 70 1 1.4 500 .14 - 39 50 69 78 80 80 80
3429-7K63-145** .793 70 2 1.4 500 .07 - 31 44 63 74 80 80 80
3424-7K63-145** .793 70 3 1.4 500 .05 - 20 39 54 80 80 80 80
3425-7K63-145** .793 70 5 1.4 500 .015 - 7 20 42 78 80 80 80
3426-7K63-145** .793 70 10 1.4 500 .005 14 23 30 34 44 60 80 80
3421-7K63-664** .793 100 .25 .66 1000 1.5 7 41 51 68 80 80 80 80
3423-7K63-664** .793 100 1 .66 1000 .25 - 28 40 59 80 80 80 80
3424-7K63-664** .793 100 3 .66 1000 .05 - - 15 36 68 80 80 80
3425-7K63-664** .793 100 5 .66 1000 .015 - - - 18 61 80 80 80
3426-7K63-664** .793 100 10 .66 1000 .005 6 14 17 24 38 58 78 80
3441-7K63-304** .793 125VAC .25 .3 2000 1.5 - 18 27 44 70 80 80 80
3443-7K63-304** .793 125VAC 1 .3 2000 .25 - - 12 30 62 80 80 80
3444-7K63-304** .793 125VAC 3 .3 2000 .05 - - 4 20 46 80 80 80
3445-7K63-304** .793 125VAC 5 .3 2000 .015 - - - 15 41 80 80 803446-7K63-304** .793 125VAC 10 .3 2000 .005 - - - 10 31 50 80 80
3462-7K63-503** .793 300 .5 .05 5000 .6 - - - 20 50 80 80 80
3463-7K63-503** .793 300 1 .05 5000 .25 - - - 10 40 80 80 80
3464-7K63-503** .793 300 3 .05 5000 .05 - - - - 25 80 80 80
3465-7K63-503** .793 300 5 .05 5000 .015 - - - - 10 65 80 80
3466-7K63-503** .793 300 10 .05 5000 .005 - - - - 10 35 70 80
LMAX(in.)
Hermetic Low Current Pi-SectionBroadband Filter
.187*
.005
.190Max
L
.150Max
.115
.050 or.050x.070slot
.050 max imperfect threador undercut
.200
.375 -28 UNF-2A
Figure 1
(.035 max imperfectthread)
Hermetic Low Current Pi-SectionBroadband Filter
.187**
.005.145
.045
L
.145
.045
.115.050 or.050x.070slot
.050 max imperfect threador undercut
.200
.410
-28 UNF-2A
Figure 2
(.035 max imperfectthread)
-
7/21/2019 EMI Filters - Ceramic
46/81
4
Details subject to change without notice.** PART NUMBERS ARE INCOMPLETE. PLEASE SEE PAGE 49 TO COMPLETE THE NUMBERS.
EMI FILTERSPI TYPE
BROADBAND
Hermetic Low Current Pi-Section
Broadband Filter
Schematic
GlassSeal
Capacitor
GlassSeal
Epoxy
CaseLead
Inductor
SolderSolder
Terminal
Solder
Solder
LMAX(in.)
WORKINGVOLTAGE
(VDC)
I dc(A)
MINCAP(F)
MINIR
(M)
MAXRdc()
MINIMUM INSERTION LOSS (dB)Per Mil-STD-220
30KHz
100KHz
150KHz
300KHz
1MHz
10MHz
100MHz
1GHz
3422-9M83-285** 1.180 100 .5 2.8 200 .3 36 69 80 80 80 80 80 80
3423-9M83-285** 1.180 100 1 2.8 200 .21 32 65 76 80 80 80 80 80
3424-9M83-285** 1.180 100 3 2.8 200 .03 10 40 50 70 80 80 80 80
3425-9M83-285** 1.180 100 5 2.8 200 .007 - 23 36 60 80 80 80 80
3426-9M83-285** 1.180 100 10 2.8 200 .005 20 30 64 40 50 70 80 80
3432-9M83-145** 1.180 150 .5 1.4 500 .3 25 57 68 80 80 80 80 803433-9M83-145** 1.180 150 1 1.4 500 .21 20 54 64 80 80 80 80 80
3434-9M83-145** 1.180 150 3 1.4 500 .03 - 29 40 60 80 80 80 80
3435-9M83-145** 1.180 150 5 1.4 500 .007 - - 30 50 80 80 80 80
3436-9M83-145** 1.180 150 10 1.4 500 .005 15 25 28 35 45 62 80 80
3432-9M83-904** 1.180 200 .5 .9 1000 .3 15 48 57 76 80 80 80 80
3433-9M83-904** 1.180 200 1 .9 1000 .21 9 45 54 73 80 80 80 80
3434-9M83-904** 1.180 200 3 .9 1000 .03 - 15 28 50 80 80 80 80
3435-9M83-904** 1.180 200 5 .9 1000 .007 - 10 20 38 69 80 80 80
3436-9M83-904** 1.180 200 10 .9 1000 .005 10 20 24 30 40 58 80 80
3462-9M83-504** 1.180 300 .5 .5 1000 .3 6 39 48 67 80 80 80 80
3463-9M83-504** 1.180 300 1 .5 1000 .21 - 36 45 64 80 80 80 80
3464-9M83-504** 1.180 300 3 .5 1000 .03 - 6 18 41 75 80 80 80
3465-9M83-504** 1.180 300 5 .5 1000 .007 - - 12 30 61 80 80 80
3466-9M83-504** 1.180 300 10 .5 1000 .005 4 12 15 22 36 56 76 803442-9N83-364** 1.205 125VAC .5 .36 2000 .33 - 32 42 60 80 80 80 80
3443-9N83-364** 1.205 125VAC 1 .36 2000 .15 - 24 35 54 80 80 80 80
3444-9N83-364** 1.205 125VAC 3 .36 2000 .026 - - 17 39 70 80 80 80
3445-9N83-364** 1.205 125VAC 5 .36 2000 .013 - - - 24 57 80 80 80
3446-9N83-364** 1.205 125VAC 10 .36 2000 .008 - - - - 48 80 80 80
3452-9N83-204** 1.205 240VAC .5 .2 3000 .33 - 22 32 50 80 80 80 80
3453-9N83-204** 1.205 240VAC 1 .2 3000 .15 - 14 25 44 75 80 80 80
3454-9N83-204** 1.205 240VAC 3 .2 3000 .026 - - - 29 61 80 80 80
3455-9N83-204** 1.205 240VAC 5 .2 3000 .013 - - - 10 50 80 80 80
3456-9N83-204** 1.205 240VAC 10 .2 3000 .008 - - - - 30 80 80 80
PA&EFILTERS
PART NUMBER
Hermetic Low Current Pi-Section Broadband Filter
.312 .290maxL
.220max
.120
.062x.125slot
.062 max imperfect threador undercut
.250
.690516-24 UNF-2A
(.035 maximperfect
.420
.440
.015
.025
.365
.385
.088
.098
.040
.050
5
16-24 UNF-2B
LOCKWASHER HEX NUT
MOUNTING HARDWARE
-
7/21/2019 EMI Filters - Ceramic
47/81
42
FEATURES: Designed to meet MIL-F-28861 requirements.
Hermetically sealed components.
Variety of capacitance and inductance values.
Voltage ratings 50 VDC through 240 VAC.
Excellent insertion loss performance.
Operating temperature range -55C to +125C.
APPLICATIONS:The T section filter is another three element device that consists of two inductors one at either end and
a capacitive element between them. It will provide the user with 60 dB per decade roll-off beyond the cut-off
frequency which is typically around 30 KHz. The insertion loss across the frequency range is similar to that of the
PI filter with approximately half of the capacitance value of the PIs. It is app