emi power filters catalog - mhz electronics elements provide ... emi power filters selection guide...

EMI Power Filters

CERTIFIED Signal & Power Integrity Group

&

2

Spectrum Control EMI filtered power products prevent

unwanted interference from entering your system, as

well as eliminate emissions that can contaminate the

AC power grid. Our standard and custom products

are available in a wide range of AC/DC current and

voltage ratings to address EMI filtering for high current

applications. All Spectrum power products are

designed to meet global EMC emissions regulations.

Spectrum Control is committed to providing an

integrated approach to EMC problem solving by offering

customers consulting, diagnostic testing, design and

manufacturing services. As a fully integrated manufacturer,

Spectrum Control is able to respond to short lead time

requests for new prototypes and variations to standard

products. This enables us to provide the most cost-

effective solution that satisfies both your performance

and budgetary needs.

In addition, our family of power products provide

low cost solutions to EMI challenges, helping you

lower inventories and increase production assembly

efficiency.

Spectrum Control power products are used in

a variety of industries worldwide, including telecom-

munications, computers and peripherals, medical,

aerospace, military, power supplies, appliances

and industrial controls.

CERTIFIED

EMI PowerFilters Signal & Power Integrity Group

Control ProductsSystems Company

A

3

Spectrum Control Inc...

SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.spectrumcontrol.comSPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

Single Line Filters

• Single Line Feed-thru Filters• DC Single Line Feed-thru Series• DC Single Line Pi Series

• AC Single Line Feed-thru Series• AC Single Line Pi Series

12 - 22

High Current Filtered Terminal Blocks

• High Current FilteredTerminal Blocks

23

Power Entry Modules

Bolt-in Rear TerminalsBolt-in Right Angle TerminalsHigh Frequency AttenuationSnap-in With Wire LeadsBolt-in With Wire LeadsSnap-in Mount

• Fused Filtered Power Entry Modules

• Switched & Fused Filtered Power Entry Modules

• Switched & Fused FilteredPower Entry Modules For European Market

24 - 51

PCB Power Filters

• Miniature Printed Circuit Boards

• Power Entry Modules Bolt-inRight Angle Terminals

• Power Entry Modules High Frequency Attenuation Bolt-in

• PCB Power Filters Miniature Printed Circuit Boards

52 - 59

Power Line Filters

• Appliance Filters• Single Stage• Single Stage Wire Leads• Single Stage Wire Leads for

Medical Purpose Applications

• Single Stage - Higher Current• DC - Higher Current• DC - Single Stage• Dual Stage

• Three Phase - LowCurrent/High Performance

• Three Phase • Three Phase - High Performance

60 - 97

Military/Aerospace Multisection Filters

• Military/AerospaceMultisection Filters

98 - 105

Custom/Application Specific Filters

• Custom/Application Specific Filters

106 - 109

Appendix

• Part Number Index• Design Inquiry Form• www.spectrumcontrol.com

Online tools

110 - 115

Page


4

EMI Power Filters Selection Guide

Applications

Features/Benefits

PerformanceCharacteristics

High CurrentFeed-thru Filters

High Current Terminal Blocks

Power EntryModules

Power Entry ModulesFused/Switched

and Fused

Cellular base stations, telephoneracks, high current switch modepower supplies, power amplifiersand servers

Cellular base stations, telecom-munication switching networks,hi-reliability radar & transmissionsystems, industrial controls,power supplies, UPS, instru-mentation and power distribution

Digital equipment, personalcomputers and peripherals,measuring instruments,home appliances, monitorand display units

Digital equipment, personalcomputers and peripherals, measuring instruments, homeappliances, monitor and display units

Current ratings (max) -To 500 Amps

Voltage ratings (max) -To 1000 VDCand to 240 VAC

Insertion loss range -AC: 1 MHz to 1 GHzDC: 150 KHz to 10 GHz

Temperature range --55°C to +125°C

Capacitance -To 4.7 µFClass Y2 and Y4 available

Current ratings (max.) -Barrier strip: 60 Amps

Voltage ratings (max.) - From 100 VDC to 250 VAC, 60 Hz

Insertion loss range -Effective insertion loss from 1 MHz to 200 MHz


Capacitance -.015 µF per line or .030 µF per pair

Current ratings (max.) -Up to 15 Amps

Voltage ratings (max.) -From DC to 250 VAC, 60 Hz

Insertion loss range -Effective filtering from100 KHz to 30 MHz


Leakage current range -0.35 mA to 0.50 mA max

Current ratings (max) -2, 4 and 6 Amps

Voltage ratings (max.) -125 VAC and 250 VAC



Leakage current range -0.35 mA to 0.50 mA max for general purpose filters

0.005 mA to 0.10 mA max for medical filters

Easy installation -Bolt-in style, surface mount

Design flexibility -Available with single, dual,triple and quad configura-tions, different stud lengths,mounting brackets hardwareand EMI gasketing available.

Performance -Ideally suited to help meetNEBS, GR1089, andEN55022

Agency approvals -Designed to meet agencyapprovals, some selected filters UL 1950 recognized,CSA C22.2 certified andTÜV approved

Custom options -Custom interfacing, contactpins, wire leads, multiple outputs

Environmental -Can be used in both indoorand outdoor applications

Rugged construction -Provides protection to filter-ing element; especially useful for repeated in-fieldwiring changes

Design flexibility -2 x 2 to 2 x 6 position blocks

Terminal Blocks availablewith either metric or USthreaded studs

Performance -Filter elements provide high insertion loss for EMI filtering of DC power lines to help meet NEBS,GR1089, and EN55022

Agency approvals -UL recognized

Rugged construction -Designed to perform inindustrial environments

Design flexibility -Bolt-in or snap-in mounting

Available in fused orswitched and fused versions

Performance -Ideally suited for products that must conform to FCC part 15 regulations

Meets over-voltage of IEC 664 category II and complies with IEC 950

Low leakage versions available for medical applications

Agency approvals -UL recognized, CSA certified, TÜV approved(tested and found to be in accordance with VDE0565 Part 3)


Design flexibility -Available in PCB mount,fast-on tab, solder lug or flying leads

Performance -Ideally suited for productsthat must conform to FCCpart 15 regulationsMeets over-voltage of IEC664 category II and complies with IEC 950Metal case provides maxi-mum isolation that optimizesperformance

Agency approvals -UL recognized, CSA certified,TÜV approved (tested andfound to be in accordancewith VDE 0565 Part 3)

Custom options -Value added connectors, wire leads, ring terminals

Pages 42-51Pages 24-41Pages 23Pages 12-22

www.spectrumcontrol.com/sfilter www.spectrumcontrol.com/terblk www.spectrumcontrol.com/pem www.spectrumcontrol.com/pemfsf

For data sheets on theproduct you’re looking for,enter the dedicated URL


5

EMI Power Filters Selection Guide

Applications

Features/Benefits

PerformanceCharacteristics

Power LineFilters

Three-PhasePower Line

Filters

Military/AerospaceMultisection Filters

Commercial CustomAssemblies

Digital equipment, personalcomputers and peripherals,measuring instruments, medical, industrial, telecommu-nications equipment, factoryautomation, UPS, vendingmachines, elevators, and switchmode power supplies

Digital equipment, industrial equipment, UPS, inverters,converters, automation equipment, computerizedindustrial washing machines,and switching power supplies

Commercial & military avionics,satellites, secured communica-tions, ruggedized computers,radar, electronic warfare, andground/air weapon systems

Telecommunications, cellularbase stations, medical equipment, telephone switching, traffic control systems, industrial work stations, servers, power supplies, UPS, industrial controls and welders

Current ratings (max) -To 260 Amps

Voltage ratings (max.) -From DC to 250 VAC, 60 Hz



Leakage current range -0.35 mA to 3.0 mA max

Current ratings (max) -3 Amp to 200 Amps

Voltage ratings (max.) -250 VAC to 440 VAC



Leakage current range -Standard and low leakage designs available


Voltage ratings (max.) - 400 VDC and 240 VAC standard; custom voltage ratings available

Insertion loss range -Effective filtering from 10 KHz to 10 GHz

Temperature range - -55°C to +125°C


Voltage ratings (max.) - 400 VDC and 240 VACstandard; custom voltageratings available

Insertion loss range -Effective filtering from 10 KHz to 10 GHz


Leakage current range -Standard and low leakagedesigns available

Rugged construction -Designed to perform in industrial environments

Design flexibility -Available with fast-on, bolt-interminals or wire leads

Single stage and dual stage

Performance -Ideally suited for products that must conform to FCC part 15 regulations

High performance in bothmetal and plastic cases

Excellent attenuation for high voltage impulse

Agency approvals -Several styles are UL recognized, CSA certified,TÜV approved (tested andfound to be in accordancewith VDE 0565 Part 3)


Design flexibility -Available with fast-onor bolt-in terminals

Single and dual stage

Delta and Wye configurations

Performance - Ideally suited for products that must conform to FCC part 15 regulations

Both metal and plastic casesprovide high performance

Excellent attenuation for high voltage impulse

Agency approvals -Agency approvals pending


Design flexibility -Filters designed to meet cus-tomer’s circuit requirements

Transient protection

Circuit breakers

Voltage cut-off

Other options available

Provides quick and economi-cal solutions to meet cus-tomers’ specific requirements

Increases speed-to-marketand decreases developmenttime

Designs optimized throughEMC verification

Agency approvals -Designed to meet NEBS and safety agency approvals

Rugged construction -Metal enclosures built to withstand MIL-STD environmental conditions

Design flexibility -Standard catalog parts avail-able Parts designed to meetcustomers’ requirements

Performance - EMI designs provide excellent isolation and high frequency performance

Military approvals -Available to meet MIL-F-15733 and MIL-STD-461

Military testing IAW MIL-STD-202, MIL-STD-105

EMI design verification -Equipment verification canbe accomplished throughSpectrum Control’s EMI test lab

Pages 52-87 Pages 88-97 Pages 98-105 Pages 106-109

www.spectrumcontrol.com/pline www.spectrumcontrol.com/3pline www.spectrumcontrol.com/multi www.spectrumcontrol.com/comcus


6

Spectrum Control’s Expertise

Spectrum Control is unique in providing an integratedapproach to EMC problem solving by offering customerconsulting, diagnostic testing, design and manufacturingservices. As a fully integrated manufacturer, we are ableto respond to short lead times and develop cost-effectivesolutions to satisfy your performance and budgetary needs.

Test Spectrum Control’s Test Facility provides a total solution

for your compliance issues In-house anechoic chamber and shielding room NARTE certified engineering staff Tests available for:

• European emission and immunity regulations(CE Mark)

• FCC Part 15

• MIL standard testing

Design In-house EMI and power conditioning specialists Comprehensive computer modeling Designs are “in-house” compliance verified Custom assemblies:

• Incorporate EMI filtering, circuit breaker protection,transient suppression, voltage cut-off, power factor correction, harmonic suppression, remote sensingand other options to meet your specific requirements

• Plug-and-play designs

• Reduce your time to market

• Lower your inventory needs

Manufacture Flexible factories Custom designs Spectrum Control, Inc. ISO 9001 certified Schedule sharing programs available Vertically integrated supplier


7

Spectrum Control’s Expertise

As a complete source of EMC solutions, Spectrum Controlcombines state-of-the-art test facilities with proven exper-tise in the design and manufacture of EMI/RFI filteredpower products.

Spectrum Control offers:Engineering Support – Our experienced engineering staffwill work closely with your design and manufacturing teamto provide rapid and cost-effective solutions meeting themost stringent EMI requirements.

Reduced Lead Times and Volume Production – Ourvertical integration allows us to reduce lead times for bothprototype and production orders . . . ensuring on-timedelivery. This not only reduces your inventory, it savesyou time and money.

Custom Solutions – We offer maximum design expertiseand versatility to meet the need of any unique filteringapplication. In addition, we’ll develop power conditioningsolutions with features such as back panels with EMIfiltering and surge protection, circuit breakers, LEDsand voltage cut-off.

Full Qualification Testing – We offer a fully integratedquality assurance process, as well as testing in compliancewith MIL-F-28861, MIL-F-15733, MIL-STD-202, and otherEMI specifications. Spectrum Control’s facilities have beenaudited and qualified to MIL-I-45208 and are registered to ISO 9001.

Customer Support Programs – We will work closely with your organization to help improve the final design and performance of your products, as well as increaseyour manufacturing and operational efficiency. SpectrumControl has instituted a variety of programs designed to maximize these opportunities.

Flexible manufacturing to cut cycle times and meet deadlines

EDI to streamline the transmitting of information

Inventory Management through flexible shipping programs

Consignment/schedule sharing programs to accommodate customers’ forecasts

Broader distribution base to make our products more readily available and accommodate vendor reduction plans

New product development geared to meeting customer-specific requirements and targets


8

Application Guidelines

Need for EMI suppressionGlobal regulatory agencies have established limits to the amount of noise that man-made electronic devicescan radiate or conduct. These regulations have gainedgreater importance as the world’s electronic populationintensifies and the proximity of electronic devicesbecomes closer.

EMI can propagate through two basicavenues: Conducted and RadiatedConducted refers to events where the EMI energy flowsthrough power lines, data cables and other wiring thatcarries functional data or power.Radiated refers to energy that is propagated by magnetic or electric fields, which originate from otherelectronic or electrical systems.

Interference typesThere are two modes of conducted noise: differentialmode (symmetrical or normal mode) and common mode(asymmetrical mode).Differential mode interference signals are present onone side of the line, referenced to the other. The currentsflow along one phase and return along another phase.Common mode interference signals are present on bothsides of the line referenced to ground. The current flowsfrom the source to ground along the ground path andreturns along the phases.

Sources of EMIElectromagnetic interference can occur naturally or through electronic sources. Lightning discharges, precipitation, sand and dust storms, and cosmic noiseare sources of natural EMI.

EMI generated from power electrical products causethe most concern. These man-made sources, such aspower lines, rotating machinery, power supplies andelectronic transmission devices, all have their own signatures and noise pollution.

EMI filters, insertion loss and attenuationPower line EMI filters are designed to attenuate (or reduce) all radio frequency emissions or energy thatis above the applicable EMC specification. Most powerline EMI filters utilize inductor/capacitor “low pass” com-ponent configurations that pass all DC or low frequencyAC necessary energy and attenuate (suppress) higherfrequencies containing noise or unwanted energy.

To insure a customer’s “in system” unit to unit attenuation uniformity of power line filters, an insertion loss production line test is performed by Spectrum Control, Inc.

Each of the specific frequencies is measured using RF test equipment and the “reference signal level” of each frequency is stored. Some systems sweep the entire frequency range and store this “reference signal level”. Thefilter to be measured, tested, or evaluated is then “inserted”between the generator and receiver that established thestored “reference signal level” on the RF test analyzer.

The measured difference without a filter (“the referencesignal level”) and with the filter “inserted” into the RF testequipment/analyzer is defined as insertion loss. The unit of measure for insertion loss is the decibel (dB). As notedon most curves in this bulletin, as frequency increases, the higher the insertion loss or dB value. The plot of frequency versus dB value establishes the typical insertion loss curve.

Installation CriteriaProper installation of a filter network is critical to achievingsuccessful filtering of electromagnetic interference.Spectrum Control recommends that power line filters beinstalled where the power line enters the equipment. Thefilter acts as a barrier between polluted energy and cleanenergy going into your equipment. It is important that thefilter is connected to an effective ground plane and whereproximity does not couple radiated noise to the clean lines.

POWERINPUT

CLEANLINE

POWERINPUT

DENOTESCOUPLINGFROM NOISYCIRCUITSBACK TOLINE

LINE FILTER

CABINET

CORRECT

LINEFILTER

DENOTESCOUPLINGFROM NOISYCIRCUITSBACK TOLINE

CABINET

INCORRECT

Power Filter Installation


9

Measurement Guidelines

Spectrum Control has the capability to perform a wide range of tests for EMI filters. Unique custom testing systems, designed by Spectrum Control assure the accuracy required in today’s demanding environments.Testing is performed by employing a 50 ohm source andload impedance per MIL-STD-220. The individual filter performance is stated in terms of insertion loss. Overallattenuation reflects the filter’s interaction within the system.Individual filter performance may differ from system to system and each application should be verified throughsystem testing. Examples of various testing abilities andconfigurations are outlined below.

Differential (Normal or Symmetrical)Mode Insertion LossDifferential mode noise is caused by non-sinusoidal conduction of rectifiers and other switching devices creating harmonic distortion.

This noise is predominant from the power frequency to approximately 10 MHz. Since it follows conventional current flow, it is considered to be of the same magnitudebut opposite phase of the other line. Spectrum Controlmeasures differential mode insertion loss in a 50 ohm system with Balun transformers as shown.

Common (Asymmetrical) Mode Insertion LossSince common mode insertion loss is of the same phase as the opposite line, they may not be of the same magnitude, depending on the end system circuitry.Spectrum Control tests common mode insertion loss oneach line in a 50 ohm system as shown.

Leakage CurrentLeakage is a measurement of reactive current (capaci-tance) to ground per line. Spectrum Control uses the following test setup for leakage current measurement.

AC Voltage DropAC voltage drop is defined as E in - E out = AC voltage drop.

Spectrum Control uses the following circuit for AC voltagedrop testing:

DC Voltage DropDC voltage drop is performed on each line individually.This test provides the total DC voltage drop for that line of the filter. The following circuit is used in testing:

DEVICEUNDERTEST

TIES TO CHASSISOF DEVICE

ACSOURCE

1

2

1 NEUTRAL TEST2 HIGH TEST

INSULTATED TABLE

v1.5 KΩ

0.15 µFD

IN ACCORDANCE WITH U.L. 1283 METHOD

E1 DUT(FILTER) E2

A

DUT(FILTER)

A

EVD

RS

RECEIVER

LINE50Ω

50Ω

LINE

NEUT NEUT

FILTER

FILTER Ø A

FILTER Ø B

FILTER Ø C

RECEIVER

BALUNBALUN

SIGNALGENERATOR

50Ω

50Ω


10

EMC Testing Solutions

Spectrum Control is a solutions-oriented EMC test corporation committed to effectively satisfying worldwideEMC standards for commercial and military equipment.Our EMC testing services offer you a flexible resource to assist in product development by identifying and correcting EMI susceptibility and/or emission problems.

Our commitment to our customers goes much furtherthan any other EMI filtered power products manufacturer.Spectrum Control has a fully equipped EMC TestLaboratory and experienced engineering staff ready to solve your most demanding EMC challenges.

We can test your equipment, system or subsystem tovarious domestic and international regulatory standards,determine state of compliance, and develop the mostcompact and cost-effective solution. These services (EMCtesting and compliance recommendations) are availablefor a modest daily fee. It is not uncommon for clients leaveSpectrum Control’s EMC Test Laboratory with a prototypein hand.

State-of-the-art Testing Two test environments available: anechoic

chamber and shielded room Baseline of device under test in ambient-free

anechoic chamber Computer controlled pre-selected EMI receivers

with quasi-peak detection accumulate data for displaying information in graphical or tabular formats

Fiber optic coupled video cameras for dynamic test observation

Computer generated test data reduces time andimproves accuracy

Testing CapabilitiesUL Underwriter’s Laboratories, UL 1283

MILITARY

MIL-STD-461 A/B/C/D and MIL-STD-1399

AUTOMOTIVE

SAE-J1113, SAE-J551

COMMERCIAL

FCC-Part 15

RTCA-DO-160 A/B/C Boeing-16050-2

Bellcore-TR-NWT-001089

INTERNATIONAL

EN 55011 (CISPR 11)

EN 55014 (CISPR 14)

EN 55022 (CISPR 22)

IEC-1000-4-02 ESD

IEC-1000-4-03 RFI

IEC-1000-4-04 EFT

IEC-1000-4-05 Surge


11

EMC Testing Solutions

One of the most significant advantages of SpectrumControl’s testing services lies in our experience and expertise in evaluating, designing and producing productsfor the suppression of EMI. Our approach to EMC testingenables us to identify, as well as solve any problems orpotential problems found in your system. Spectrum’sdesign and production engineers will work with your engineering team to develop a filter solution that eliminates your EMI problems.

Once we have identified an EMI failure, we will developa prototype design, integrate the EMC modification intoyour device or system, and verify compliance to the appropriate test specifications. Spectrum Control maintainssemi-automated and automated manufacturing facilities to economically produce the modification installed duringtesting. Through these capabilities your equipment willleave Spectrum Control with a prototype, as well as a fully compliant system.

Test Spectrum Control Test Facility

will define compliance issues In-house anechoic chamber

and shielded room NARTE certified engineering staff Test available for:

• European emission and immunity regulations

• FCC Part 15• MIL 461 Series

Design In-house EMI specialists Computer modeling CAD systems internet accessible Designs are “in-house”

compliance verified Value-added designs:

• Incorporate circuits and additional components

• Ease of production assembly

• Lower inventory needs

Manufacture Flexible operations Custom designs built in U.S.A. ISO 9001 certified facilities Workmanship MIL-STD-2000

certified Schedule sharing programs

available Vertically integrated

EMI filter supplier


12

High Current

DC Single Line Feed-thru Series

Features Voltage Rating 130VDC C Configuration with Class Y4 capacitors Current rating up to 300 Amps Operating Temperature Range: -40C to +85C Excellent filtering in compact package Bolt-in style with D-shaped bushing for easy installation Low cost EMI solution Design flexibility UL and Semko approved

Applications Telecommunications (cellular base stations,

telephone switching racks, etc.) Power supplies Medical Equipment C.O.T.S. (Commercial-Off-The-Shelf) Military Industrial equipment controls Data Transmission Equipment

Sing

le L

ine

Filt

ers

Part Rated Min. Minimum Insertion Loss (db)*Number Current Cap. .01MHz .10MHz 1MHz 10MHz 100MHz 1000MHz

52-226-011-10 10A52-226-011-16 16A

10nF – 4 21 41 6052-226-011-32 32A52-226-011-63 63A52-226-011-100 100A 47nF 2 15 34 53 7452-226-011-200 200A –52-226-011-250 250A 100nF 5 21 40 60 8552-226-011-300 300A52-226-021-16 16A52-226-021-32 32A 47nF 2 15 34 53 7452-226-031-63 63A52-226-021-100 100A 100nF 5 21 40 60 8552-226-021-200 200A52-226-021-250 250A 470nF 2 16 33 52 75 9052-226-021-300 300A52-226-031-16 16A52-226-031-32 32A 100nF – 5 21 40 60 8552-226-031-63 63A52-226-031-100 100A 470nF 2 16 33 52 7552-226-031-200 200A52-226-031-250 250A 1000nF 6 20 40 60 8552-226-031-300 300A52-226-041-16 16A 9052-226-041-32 32A 470nF 2 16 33 52 7552-226-041-63 63A52-226-041-100 100A 1000nF 6 20 40 60 8552-226-041-200 200A 4700nF 15 35 54 74 90

* Optimum performance with proper installation

Specifications


13

Part Number A B C D E F

52-226-011-10 2.24 (57) 0.39 (10) 0.51 (13) 0.56 (14.29) 0.63 (16)52-226-011-16

2.48 (63) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18)0.71 (18)

52-226-011-3252-226-011-63 3.78 (96) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26) 1.18 (30)52-226-011-100 4.45 (113) 0.63 (16)

1.06 (27) 1.25 (31.75)1.26 (32)

1.30 (33)52-226-011-200 5.12 (130) 1.57 (40)52-226-011-250

5.83 (148)0.75 (19)

1.57 (40) 2 (50.80) 1.81 (46) 1.65 (42)52-226-011-30052-226-021-16

2.95 (75) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18)1.18 (30)52-226-021-32

52-226-031-63 3.78 (96) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26)52-226-021-100 4.45 (113) 0.63 (16)

1.06 (27) 1.25 (31.75)1.26 (32)

1.30 (33)52-226-021-200 5.12 (130) 1.57 (40)52-226-021-250

6.30 (160)0.75 (19)

1.57 (40) 2 (50.80) 1.81 (46) 2.13 (54)52-226-021-30052-226-031-16

2.95 (75) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18)1.18 (30)52-226-031-32

52-226-031-63 3.78 (96) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26)52-226-031-100 4.45 (113) 0.63 (16)

1.06 (27)1.25 (31.75) 1.26 (32) 1.30 (33)

52-226-031-200 5.79 (147) 1.5 (38.10) 1.57 (40) 1.97 (50)52-226-031-250

7.01 (178)0.75 (19)

1.57 (40) 2 (50.80) 1.81 (46) 2.83 (72)52-226-031-30052-226-041-16

3.23 (82)0.63 (16) 1.25 (31.75)

0.71 (18)1.30 (33)52-226-041-32

52-226-041-63 3.98 (101)1.06 (27)

1.02 (26)52-226-041-100 5.24 (133)

0.75 (19)1.5 (38.10) 1.26 (32) 1.97 (50)

52-226-041-200 6.50 (165) 1.57 (40) 2 (50.80) 1.57 (40) 2.68 (68)

High Current

DC Single Line Feed-thru Series

F B

E C

A

D

.025 (.64) SHOULDER

WORKORDER NO.

DATE CODESINGLE "D"MOUNTING FLAT

Dimensions

Sing

le L

ine

Filt

ers

Dimensions in inches (mm)

Part Rated Min. Minimum Insertion Loss (db) *Number Current Cap. (2X) .01MHz .10MHz 1MHz 10MHz 100MHz 1000MHzStandard Performance52-226-020-10 10A

0.5 823

7052-226-020-16 16A 10nF

–35

52-226-020-32 32A 2 10 23 5090

52-226-020-63 63A 100nF 8 27 6752-226-020-100 100A

470nF4 21

3070 90

52-226-020-200 200A 7 23 60High Performance52-226-029-10 10A52-226-029-16 16A 100nF – 8 25 7552-226-029-32 32A52-226-029-63 63A 470nF 4 21 35 70

90 90

52-226-029-100 100A 1000nF 8 26 57 7352-226-029-200 200A 4700nF 20 40 85 90



14

High Current

DC Single Line Pi Series

Features Voltage Rating 130VDC Pi Configuration with Class Y4 capacitors Current rating up to 200 Amps Excellent filtering in compact package Bolt-in style with D-shaped bushing for easy installation Low cost EMI solution UL and Semko approved



Sing

le L

ine

Filt

ers

Specifications

Circuit Diagram


15

High Current

DC Single Line Pi Series


Standard Performance52-226-020-10 3.54 (90) 0.63 (16) 1.93 (49)52-226-020-16

3.86 (98)0.47 (12) 0.67 (17) 0.75 (19.05)

0.71 (18) 2.09 (53)52-226-020-3252-226-020-63 6.30 (160) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26) 3.70 (94)52-226-020-100 7.24 (184) 0.63 (16)

1.06 (27)1.25 (31.75) 1.26 (32) 4.09 (104)

52-226-020-200 8.23 (209) 0.75 (19) 1.50 (38.10) 1.57 (40) 4.41 (112)High Performance52-226-029-10 5.12 (130) 0.63 (16) 3.50 (89)52-226-029-16

5.47 (139)0.47 (12) 0.67 (17) 0.75 (19.05)

0.71 (18) 3.70 (94)52-226-029-3252-226-029-63 6.81 (173) 0.63 (16)

1.06 (27)1.25 (31.75) 1.02 (26) 4.13 (105)

52-226-029-100 8.98 (228)0.75 (19)

1.50 (38.10) 1.26 (32) 5.71 (145)52-226-029-200 11 (279) 1.57 (40) 2 (50.80) 1.57 (40) 7.17 (182)

Dimensions

F

B

E C

A

D

.025 (.64) SHOULDER

WORKORDER NO.

DATE CODE SINGLE "D"MOUNTING FLAT

Sing

le L

ine

Filt

ers



16

Part Rated Min. Minimum Insertion Loss (db) *Number Current Cap. .01MHz .10MHz 1MHz 10MHz 100MHz 1000MHz

52-226-016-10 10A 2.2nF - 9 30 4552-226-016-16 16A

4.7nF – 2 15 34 5452-226-016-32 32A52-226-016-63 63A 10nF 4 21 41 6052-226-016-100 100A 47nF 2 15 34 53 7452-226-016-200 200A52-226-016-250 250A 100nF 5 21 40 60 8552-226-016-300 300A52-226-026-10 10A 4.7nF 2 15 34 5452-226-026-16 16A

10nF–

4 21 41 6052-226-026-32 32A –52-226-026-63 63A 47nF 2 15 34 53 7452-226-026-100 100A 100nF 5 21 40 60 8552-226-026-200 200A52-226-026-250 250A 220nF 10 27 47 67 9052-226-026-300 300A52-226-036-16 16A 47nF 2 15 34

5374

52-226-036-32 32A 33nF 3 16 35 9052-226-036-63 63A 100nF 5 21 40 60 8552-226-036-100 100A 220nF 10 27 47 6752-226-036-200 200A52-226-036-250 250A 470nF 2 16 33 52 75

90

52-226-036-300 300A52-226-046-16 16A 100nF 5 21 40 60 8552-226-046-32 32A 47nF – 2 15 34 53 7452-226-046-63 63A 220nF 10 27 47 6752-226-046-100 100A 470nF 2 16 33 52 7552-226-046-200 200A52-226-046-250 250A 1000nF 6 20 40 60 85

90

52-226-046-300 300A


High Current

AC Single Line Feed-thru Series

Features Voltage Rating 250VAC C Configuration with Class Y2 capacitors Current rating up to 300 Amps Excellent filtering in compact package Bolt-in style with D-shaped bushing for easy installation Low cost EMI solution Design flexibility UL and Semko approvals pending



Sing

le L

ine

Filt

ers

Specifications


17

High Current

AC Single Line Feed-thru Series


52-226-016-10 2.24 (57) 0.39 (10) 0.51 (13) 0.56 (14.29) 0.63 (16)52-226-016-16

2.48 (63) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18)0.71 (18)

52-226-016-3252-226-016-63 3.78 (96) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26) 1.18 (30)52-226-016-100 4.45 (113) 0.63 (16)

1.06 (27)1.25 (31.75) 1.26 (32)

1.30 (33)52-226-016-200 5.12 (130) 1.5 (38.10) 1.57 (40)52-226-016-250

5.83 (148)0.75 (19)

1.57 (40) 2 (50.80) 1.81 (46) 1.65 (42)52-226-016-30052-226-026-10 2.24 (57) 0.39 (10) 0.51 (13) 0.56 (14.29) 0.63 (16)

0.71 (18)52-226-026-162.48 (63) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18)

52-226-026-3252-226-026-63 3.78 (96) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26) 1.18 (30)52-226-026-100 4.45 (113) 0.63 (16)

1.06 (27)1.25 (31.75) 1.26 (32)

1.30 (33)52-226-026-200 5.12 (130) 1.5 (38.10) 1.57 (40)52-226-026-250

5.83 (148)0.75 (19)

1.57 (40) 2 (50.80) 1.81 (46) 1.65 (42)52-226-026-30052-226-036-16

2.95 (75) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18)1.18 (30)52-226-036-32

52-226-036-63 3.78 (96) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26)52-226-036-100 4.57 (116) 1.06 (27) 1.26 (32) 1.30 (33)52-226-036-200 5.79 (147)

1.5 (38.10)1.57 (40) 1.97 (50)

52-226-036-2506.30 (160)

0.75 (19)1.57 (40)

2 (50.80) 1.81 (46) 2.13 (54)52-226-036-30052-226-046-16 3.03 (77) 0.55 (14) 0.87 (22)

1 (25.40) 0.71 (18) 1.18 (30)52-226-046-32 2.95 (75) 0.47 (12) 0.67 (17)52-226-046-63 4.45 (113) 0.63 (16)

1.06 (27)1.25 (31.75) 1.02 (26) 1.30 (33)

52-226-046-100 5.24 (133) 1.5 (38.10) 1.26 (32)1.97 (50)

52-226-046-200 5.79 (147)0.75 (19)

1.57 (40)52-226-046-250

6.30 (160)1.57 (40) 2 (50.80)

1.81 (46)52-226-046-300

2.13 (54)

Dimensions

F B

E C

A

D

.025 (.64) SHOULDER

WORKORDER NO.

DATE CODE

SINGLE "D"MOUNTING FLAT

Sing

le L

ine

Filt

ers



18

Part Rated Min. Minimum Insertion Loss (db) *Number Current Cap. (2X) .01MHz .10MHz 1MHz 10MHz 100MHz 1000MHz

Standard Performance52-226-037-10 10A 4.7nF – 4 19 7752-226-037-16 16A

10nF – 1 8 22 5052-226-037-32 32A52-226-037-63 63A 47nF 4 21 52 80 9052-226-037-100 100A 8 25 7352-226-037-200 200A

100nF 1 9052-226-037-250 250A 9 26 7552-226-037-300 300AHigh Performance52-226-019-10 10A 10nF 1 9 3052-226-019-16 16A

22nF–

3 15 4780

52-226-019-32 32A52-226-019-63 63A 150nF 1 12 27 75 9052-226-019-100 100A 3952-226-019-200 200A

470nF 4 21 85 9052-226-019-250 250A 5752-226-019-300 300A


High Current

AC Single Line Pi Series

Features Voltage Rating 250VAC Pi Configuration with Class Y2 capacitors Current rating up to 300 Amps Excellent filtering in compact package Bolt-in style with D-shaped bushing for easy installation Low cost EMI solution Design flexibility UL and Semko approvals pending



Sing

le L

ine

Filt

ers

Circuit Diagram

Specifications


19

High Current

AC Single Line Pi Series

F

B

E C

A

D

.025 (.64) SHOULDER

WORKORDER NO.

DATE CODE SINGLE "D"MOUNTING FLAT


Standard Performance52-226-037-10 3.86 (98) 0.63 (16) 2.24 (57)52-226-037-16

4.17 (106)0.47 (12) 0.67 (17) 0.75 (19.05) 0.71 (18) 2.40 (61)

52-226-037-3252-226-037-63 6.30 (160) 0.55 (14) 0.87 (22) 1 (25.40) 1.02 (26) 3.7 (94)52-226-037-100 7.24 (184) 0.63 (16)

1.06 (27)1.25 (31.75) 1.26 (32) 4.09 (104)

52-226-037-200 8.23 (209) 1.57 (40) 4.41 (112)52-226-037-250

7.87 (200)0.75 (19)

1.57 (40)1.5 (38.10)

1.81 (46) 3.66 (93)52-226-037-300High Performance52-226-019-10 4.21 (107) 0.47 (12) 0.67 (17) 0.75 (19.05) 0.63 (16) 2.6 (66)52-226-019-16

4.57 (116) 0.55 (14) 0.87 (22) 1 (25.40) 0.71 (18) 2.72 (69)52-226-019-3252-226-019-63 6.81 (173) 0.63 (16)

1.06 (27)1.25 (31.75) 1.02 (26) 4.13 (105)

52-226-019-100 8.98 (228) 1.5 (38.10) 1.26 (32) 5.71 (145)52-226-019-200 9.57 (243)

0.75 (19)5.75 (146)

52-226-019-25010.5 (267)

1.57 (40) 2 (50.80) 1.57 (40)6.30 (160)

52-226-019-300

Dimensions

Sing

le L

ine

Filt

ers


High Current

Single Line Feed-thru FiltersHigh current single line feed-thru filters from SpectrumControl are ideal to meet broad frequency applications.This series filters EMI/RFI with 150-500 Amp current withAC and DC voltages. These filters are ideal for cellularbase stations, telephone switching stations and high voltage power supply applications.

Features Ideal for high current applications Excellent filtering in a compact, durable package Bolt-in style for easy installation Current ratings to 500 Amps Voltage ratings up to 1000VDC and 240VAC Available with single, dual, and triple feed-thrus Various capacitance ratings (up to 1.68 µF) Rugged construction for indoor and outdoor

applications Various mounting brackets available Low cost EMI solution Design flexibility Custom mechanical configurations available


telephone switching racks, etc.) Power supplies Servers

Typical Insertion Loss (dB)

0.1 1 10 100Frequency (MHz)

0.01µF

0.02µF

0.04µF

0.03µF

70

60

50

40

30

20

10

0

80

0.01 1000

1.68µF

90

Electrical SpecificationsCurrent Ratings/Bolt Size: 150 Amps . . . . . . 10 mm

200 Amps . . . . . . 12 mm250 Amps . . . . . . 12 mm300 Amps . . . . . . 14 mm400 Amps . . . . . . 16 mm500 Amps . . . . . . 18 mm

Temperature Range: -25°C to 85°C

Sing

le L

ine

Filt

ers


20

Part Voltage Rating @ Current Capacitance Number

Figure-40C to +85C Rating Value

52-226-001 A 50VDC Max. 300 Amps 0.02 µF min. @ 50VDC

52-226-002 B 50VDC Max. 300 Amps 0.02 µF min. @ 50VDC

52-226-006 C 50VDC Max. 150 Amps 0.02 µF min. @ 50VDC

52-226-008 D 75VDC Max. 200 Amps 0.02 µF min. @ 50VDC

52-226-009 E 50VDC Max. 150 Amps 0.02 µF min. @ 50VDC

52-267-008 F 200VDC Max. 200 Amps 0.02 µF min. @ 40VDC

52-226-004 F 200VDC Max./240 VAC 200 Amps 1.68 µF min. @ 50VDC

52-226-015 G 200VDC Max./240 VAC 200 Amps 1.68 uF min. @ 50VDC

52-267-002 H 200VDC Max./240 VAC 200 Amps 1.68 µF min. @ 40VDC

52-267-003 J 200VDC Max./240 VAC 200 Amps 1.68 µF min. @ 40VDC

52-267-009 F 200VDC Max./240 VAC 60 Amps 1.68 µF min. @ 50VDC

52-267-010 K 200VDC Max./240 VAC 250 Amps 1.68 µF min. @ 40VDC

52-267-011 K 200VDC Max./240 VAC 100 Amps 1.68 µF min. @ 40VDC

52-267-012 K 250VDC Max. 100 Amps 1.00 µF+20% @ 40VDC

Ø .874 (22.20) (2x)

.177 (4.5) (2x)

1.299(33.0)

1.984(49.5)

1.496(38.0)

.807 (20.5)

5.393 (137.0)5.039 (128.0) .177 (4.5) (2x)

.826 (21.0)

1.652 (42.0)

Ø .204 ± .005(5.2 ± .13) THRU (4x)

Ø .118 ± .005(3.0 ± .13)

M10 x 1.5-6g STUDTIN PLATED BRASS1.295 ± .02 (2x)(32.9 ± 0.6)

.063 (1.6)

Ø 1.25(31.75)

2.598 MAX.(66.0)

4.015 ± .02(102.0 ± .6)

.826 (21.0) MIN.

Ø1.50(38.8)

.063(1.6)

4.67 (118.6)

4.20 (106.6) .236 (6.0) (2x).314 (8.0) (2x)

1.811 (46.0)

1.498(38.0)

1.587(40.3)

1.221 (31.0)

2.441 (62.0)

2.598(66.0)MAX.

1.295 ± .02 (2x)(32.9 ± 0.6)

4.015 ± .02(102.0 ± 0.6)

.826 (21.0)MIN. THRD.

LENGTH

2.047 ± .02(52.0 ± 0.6)

.125 (3.18) TYP.FOR LABEL LOCATION

DATE CODE

SCI 24-0058-4700 (3x)

SCI 24-0058-4800

M14 x 2.0 - 6g STUD (2x)

SCI 22-0833-0100BRACKET ASSEMBLY

SCI 24-0058-4800

Ø .204 ± .005 THRU (4x) (5.2 ± .13)

High Current

Single Line Feed-thru Filters

SQ 52 - 226 - 004200VDC 200A XXXX

1.102 ±0.02(28.0 ± .5)

.921 (23.4)

.047(1.2)3.976 ±0.02

(101.0 ±0.5)

.961 ±0.02(24.4 ±0.5) 1.890

(48.0) 1.969 ±0.02(50.0 ±0.5)

M10x1.5 – 6g STUDS

1.909 ±0.02(48.5 ±0.5)

3.799(96.5)

3.406(86.5) 1.801

(45.75)

0.197(5.00)

0.197(5.00)

1.772(45.0)1.378

(35.0)0.689(17.5)

1.053 ±0.01(26.75 ±0.3)

(6x) ø 0.185 ±0.004(4.70 ±0.1)

(2x) ø1.378 ± 0.004(MAX) (35.0 ±0.1)

0.197(5.00)

Mechanical DimensionsFigure A

4.669 (118.6)

4.196 (106.6).314 (8.0) (2x)

1.496(38.0)

1.586(40.3) Ø .204 (5.2)

THRU (4x)

2.441(62.0)

1.220(31.0)

.236 (6.0) (2x)

1.295 ± .02(32.9 ± 0.6) (2x)

2.598 MAX.(66.0)

4.015 ± .02(102.0 ± 0.6)

.826 (21.0)MIN. THRD. LENGTH

.125 (3.18) TYP.FOR LABELLOCATION

DATE CODE

45˚ CHAMFERBOTH ENDS

SCI 24-0058-4800

M14 x 2.0-6g STUD (2x)

.276 ± .016(7 ± .4)

.063(1.6)

Ø 1.25 (31.75)

1.811(46.0)

Ø .874 (22.20) (2x)

.177 (4.5) (2x)

1.299(33.0)

1.984(49.5)

1.496(38.0)

.807 (20.5)

5.393 (137.0)5.039 (128.0) .177 (4.5) (2x)

.826 (21.0)

1.652 (42.0)

Ø .204 ± .005(5.2 ± .13) THRU

Ø .118 ± .005(3.0 ± .13)

M10 x 1.5-6g STUDTIN PLATED BRASS1.295 ± .02 (2x)(32.9 ± 0.6)

M10 x 1.5-6g STUD-BRASS (UNPLATED)

1.413 ± .002(35.9 ± 0.6)

.248 (6.3) (2x)

.429 (10.9) .063 (1.6)

Ø 1.25(31.75)

2.598 MAX.(66.0)

4.015 ± .02(102.0 ± 0.6)

.826 (21.0) MIN. DATE CODE

2.0

Ø .874 (22.20) (2x)

.177 (4.5) (2x)

1.299(33.0)

1.984(49.5)

1.496(38.0)

.807 (20.5)

5.393 (137.0)5.039 (128.0) .177 (4.5) (2x)

.826 (21.0)

1.652 (42.0)

Ø .204 ± .005(5.2 ± .13) THRU (4x)

Ø .118 ± .005(3.0 ± .13)

M10 x 1.5-6g STUDTIN PLATED BRASS

1.295 ± .02 (2x)(32.9 ± 0.6)

M10 x 1.5-6g STUD-BRASS (UNPLATED)

1.421 ± .012[36.1 ± 0.3]

.248 [6.3] (2x)

.429 [10.9] .063 (1.6)

Ø 1.25(31.75)

1.89 0± .02 MAX.(48.0 ± 0.6)

2.717 ± .02(89.0 ± .6)

.826 (21.0) MIN.

DATE CODE

M10 x 1.5-6g STUDTIN PLATED BRASS

7.0MIN.

Sing

le L

ine

Filt

ers


21


Figure B

Figure C Figure D

Figure FFigure E

High Current

Single Line Feed-thru Filters

3.956(100.5)

3.405(86.5)

Ø 1.378(35.0)

.964(25.4)

1.702(43.25) 1.506

(38.25)

1.378(35.0) 1.929

(49.0)

PEM CLS-M4-1(6 PLACES)

1.023(26.0)

1.909 ± 1.968(48.5 ± 50)

1.259(32.0)

.248(6.3) 1.889

(48.0)

.078(2.0)MAX.

RED

.984(25.0)

BLACK

8.858 + .787/-0(225.0 + 20.0/-0)

10.433 + .78/-0(265.0 + 20.0/-0)

7.480 + .787/-0(190.0 + 20.0/-0)

2.955 (75.0)

5.516 (140.0)

2.726 (69.2)

1.363 (34.6)

M10 x 1.5-6g STUD

5.520 (140.10)

2.092 (53.10)

1.382 (35.08)

1.777 (45.10)3.428 (87.00)

2.719 (69.00)

1.52 (.060)

2.955 (75.0)

5.516 (140.0)

2.726 (69.20)

1.363 (34.60)

5.520 (140.10)

4.570 (116.00)

2.403 (51.00)

2.285 (58.00)

Ø .283 (7.2) (2x)

PEM BSOS-M4-6 (6x)

M10 x 1.5-6g STUD

.080 (1.52)

2.092 (53.10)

1.382 (35.08)

1.777 (45.10)3.428 (87.00)

2.719 (69.00)

4.807 (122.00)

Sing

le L

ine

Filt

ers


22


Figure G

Figure J

Figure H

3.799 (96.5)

3.406 (86.50)1.801

(15.75)

0.197 (5.0)

0.197 (5.0)

1.772 (45.0)

1.378 (35.00)

0.689 (17.5)

ø 0.185±0.004(6x) (4.70±0.1)

.197(5.0)

1.053±0.01(26.75±0.3)1.909±0.02

(48.5±0.5)

(MAX) ø 1.378±0.004(2x) (35.0±0.1)

0.610±0.02(15.5±0.5)

.047 (1.2)

0.118±0.02(3±0.5)

3.19±0.16(81.0±4)

.039 (1.00)

1.890 (48.0)

1.969±0.02(50.0±0.5)

Figure K

Filt

ered

Ter

min

al B

lock

s

SpecificationsELECTRICALVoltage rating: 100 VDC per terminalCapacitance: .015µF* +80% / -20% per cap

.030µF +80% / -20% per pairDielectricwithstanding voltage: 1000VDC for 1 minuteCurrent rating: 60 Amps max per terminal

MECHANICALCenter spacing: US .200: (5.08 mm)Wire size: AWG #12-26Screw material: steel, zinc chromate plateRecommended PCBhole diameter: .05" (1.30 mm) contact holeMolded material: UL rated 94VO polyamideTightening torque: 2.5 in.-lbs. max. (28 Ncm)Terminal: Brass, tin-plated

* For filter elements with additional capacitance values,consult factory.

Features Ideal for high current applications Design flexibility Available in 2 x 2 thru 2 x 6 positions UL approved

Applications Telecommunications switching networks Cellular base stations Power supplies UPS Instrumentation High reliability radar and transmission systems Industrial controls Power distribution Typical Insertion Loss — dB:

In 50 Ohm Circuit

1 MHz....... 8 70 MHz......... 365 MHz....... 24 100 MHz......... 33

10 MHz....... 32 160 MHz......... 2550 MHz....... 38 200 MHz......... 25

Part Number of A B CNumber Terminals in. (mm) in. (mm) in. (mm)

52-1013-102 2x2 2.60 66.04 2.00 50.80 1.66 42.16

52-1013-103 2x3 3.35 85.09 2.75 69.85 2.41 61.21

52-1013-104 2x4 4.10 104.14 3.50 88.90 3.16 80.25

52-1013-105 2x5 4.85 123.19 4.25 107.95 3.91 99.31

52-1013-106 2x6 5.60 142.24 5.00 127.00 4.66 118.36

High CurrentFiltered Terminal Blocks

23SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-835-1650 • Fax: 814-835-1651 • Web site: www.spectrumcontrol.comSPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58


4.600 (116.8)

1.625(41.3)

R.125 (3.2) (4X)

.65 MIN (16.5) (6X)

1.10 (27.9)

1.15 (29.1)

8-32 THREADEDINSERTS (4X)

.80 MIN (20.3)

.75 (19.0) (5X)

.75 (19.0)2.025(51.4)

2.625(66.7)

5.0 (127)5.6 (142.2)

4.6 (116.8)5.0 (127)

PANEL CUTOUT

.172 (4.3) (4X)

1.685(42.8)

2.025(51.4)

Pow

er E

ntry

Mod

ules

Power Entry ModulesBolt-in Rear Terminals

Specifications

Features Ideally suited for products that must

conform to FCC part 15 regulations Metal case offers high performance Meets over voltage of IEC 664 category II

and complies with IEC 950 Uses IEC connector that meets most safety standards Solder lug and Fast-on tab terminals available Operating temperature: -25°C to +85°C

(including temperature rise, see graph on page 25) UL approved low leakage version also available

Applications Digital equipment Personal computers and peripherals Measuring instruments Monitor and display units

60-XXX-010-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-010-3-4250VAC 1A

.047uF ± 20%6.0mH 30°C

60-XXX-010-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-010-5-4 .047uF ± 20%

60-XXX-020-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-020-3-4250VAC 2A

.047uF ± 20%2.4mH 30°C

60-XXX-020-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-020-5-4 .047uF ± 20%

60-XXX-030-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-030-3-4250VAC 3A

.047uF ± 20%1.2mH 30°C

60-XXX-030-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-030-5-4 .047uF ± 20%

60-XXX-060-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-060-3-4250VAC 6A

.047uF ± 20%0.53mH 45°C

60-XXX-060-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-060-5-4 .047uF ± 20%

60-XXX-100-3-2250VAC 10A

0.35mA 2200pF ± 20%.022uF ± 20% 0.26mH 45°C

60-XXX-100-5-2 0.50mA 3300pF ± 20%

60-BPR-150-3-11 250VAC 15A 0.35mA 2200pF ± 20% .01uF ± 20% 0.15mH 45°C

Model*Rated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY CX (L1) Rise (Max.)

Note: Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. at rated currentWeight: 45gInput: Compatible with IEC-320

Tested and found to beIAW VDE 0565 Part 3.

* Substitute BPR or BPS for XXXBPS - Solder lug terminalsBPR - Fast-on tab terminals

60-BPR & BPS Series

Circuit Diagram

1

E

2

3

E

4

CX

CY

CY

L1

24 SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.spectrumcontrol.comSPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

Power Entry ModulesBolt-in Rear Terminals

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

2.263 (57.5)

1.476 (37.5).252(6.4)

1.10(28)

.157 (4)

* General tolerance± .012 (0.3)

0.807(20.5)

1.967 (50)

1.573 (40)

1.181(30)

(2x) .142 (3.6)

.944 (24)

.846(21.5)


60-BPX-010;-020;-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPX-010-5-X

60-BPX-020-5-X

60-BPX-030-5-X

60-BPX-060;-100

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPX-060-5-X

60-BPX-100-5-X

60-BPX-010;-020;-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPX-010-5-X

60-BPX-020-5-X

60-BPX-030-5-X

60-BPX-060;-100

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPX-060-X-4

60-BPX-100-X-2

60-BPX-060-X-2

120

100

80

60

40

20

020 30 40 50 60 70 80 90

Ambient Temperature (°C)

Cur

rent

(%)

Temperature Characteristics

Pow

er E

ntry

Mod

ules

60-BPR & BPS Series


Power Entry ModulesBolt-in Right Angle Terminals



and complies with IEC 950 Uses IEC connector that meets most safety standards PCB mounting types available (see page 54) Length under tab is shortened for small spaces

Operating temperature: -25°C to +85°C(including temperature rise, see graph on page 27)

UL approved low leakage version also available


Specifications

60-BPF-010-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-BPF-010-3-4250VAC 1A

.047uF ± 20%6.0mH 30°C

60-BPF-010-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-BPF-010-5-4 .047uF ± 20%

60-BPF-020-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-BPF-020-3-4250VAC 2A

.047uF ± 20%2.4mH 30°C

60-BPF-020-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-BPF-020-5-4 .047uF ± 20%

60-BPF-030-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-BPF-030-3-4250VAC 3A

.047uF ± 20%1.2mH 30°C

60-BPF-030-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-BPF-030-5-4 .047uF ± 20%

60-BPF-060-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-BPF-060-3-4250VAC 6A

.047uF ± 20%0.53mH 45°C

60-BPF-060-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-BPF-060-5-4 .047uF ± 20%

ModelRated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY CX (L1) Rise (Max.)


60-BPF Series

1

E

2

3

E

4

CX

CY

CY

L1

Circuit Diagram

Pow

er E

ntry

Mod

ules



Power Entry ModulesBolt-in Right Angle Terminals

Common Mode Normal Mode


1.180 (30)

Panel cutout dimensionsmounts from backside

R4.5

1.180 (30)

.865 (22)

1.573 (40)2- .142 (3.6)

1.967 (50)

1.573 (40)

2- .142 (3.6)

.885(22.5)

1.463 (37.2)

1.317(33.5)

( )

.991(25.2).590 (15)

.142(3.6).059

(1.5)

.047 (1.2)

1.070(27.2)

.232 (5.9)

.708 (18)

.024 (.6)

.031 (.8)

.779(19.8)

* Generaltolerance± .012 (.3)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

60-BPF-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPF-010-3-X

60-BPF-020-3-X

60-BPF-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPF-030-3-X

60-BPF-060-3-X

60-BPF-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPF-010-X-4

60-BPF-020-X-4

60-BPF-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPF-030-X-4

60-BPF-060-X-4

60-BPFFast-on Terminals120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


60-BPF Series

Pow

er E

ntry

Mod

ules



conform to FCC part 15 regulations Metal cased miniature filter offers high performance Meets over voltage of IEC 664 category II

and complies with IEC 950 PCB mounting types available (see page 56) PCB mounting minimizes space and provides

economical installation Excellent filtering characteristics for high frequencies Earth coil standard Operating temperature: -25°C to +85°C

(including temperature rise, see graph on page 29)


Power Entry ModulesHigh Frequency Attenuation

Specifications

0.35mA 2200pF ± 20%0.1uF ± 20%

250VAC 1A.047uF ± 20%

6mH 18.3uH 30°C

0.50mA 3300pF ± 20%0.1uF ± 20%

.047uF ± 20%

0.35mA 2200pF ± 20%0.1uF ± 20%

250VAC 2A.047uF ± 20%

2.4mH 18.3uH 30°C

0.50mA 3300pF ± 20%0.1uF ± 20%

.047uF ± 20%

0.35mA 2200pF ± 20%0.1uF ± 20%

250VAC 3A.047uF ± 20%

1.2mH 18.3uH 30°C

0.50mA 3300pF ± 20%0.1uF ± 20%

.047uF ± 20%

0.35mA 2200pF ± 20%0.1uF ± 20%

250VAC 6A.047uF ± 20%

.53mH 18.3uH 45°C

0.50mA 3300pF ± 20%0.1uF ± 20%

.047uF ± 20%

ModelRated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY CX (L1) (L2) Rise (Max.)


60-BHS Series

60-BHS-010-3-11

60-BHS-010-3-4

60-BHS-010-5-11

60-BHS-010-5-4

60-BHS-020-3-11

60-BHS-020-3-4

60-BHS-020-5-11

60-BHS-020-5-4

60-BHS-030-3-11

60-BHS-030-3-4

60-BHS-030-5-11

60-BHS-030-5-4

60-BHS-060-3-11

60-BHS-060-3-4

60-BHS-060-5-11

60-BHS-060-5-4

1

E

2

3

E

4

CX

CY

CY

L1

L2

Circuit Diagram

Pow

er E

ntry

Mod

ules





1.180 (30)


R4.5

1.180 (30)

.865 (22)

1.573 (40)2- .142 (3.6)

1.967 (50)1.573 (40)

2- .142 (3.6)

.885(22.5)

1.534 (39)1.389(35.3)

.098(2.5)

.031 (.8)

.779(19.8)

1.180 (30)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHS-060-X-11

60-BHS-030-X-11

60-BHS-020-X-11

60-BHS-010-X-11

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHS-060-X-4

60-BHS-030-X-4

60-BHS-020-X-4

60-BHS-010-X-4

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHS-060-3-11

60-BHS-030-3-11

60-BHS-010-3-11

60-BHS-020-3-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHS-060-3-4

60-BHS-030-3-4

60-BHS-010-3-4

60-BHS-020-3-4

60-BHS-XXX-X-11

60-BHS-XXX-X-4 60-BHS-XXX-3-4

60-BHS-XXX-3-11

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


Power Entry ModulesHigh Frequency Attenuation

60-BHS Series

Pow

er E

ntry

Mod

ules


Figure

A

C

A

C

B

A

C

B

A

B

Inductance(L1)

3.0mH

1.5mH

0.5mH

1.5mH

0.5mH

1.5mH


30

Pow

er E

ntry

Mod

ules

Power Entry ModulesBolt-in Rear TerminalsFor General Purpose Applications

Specifications



and complies with IEC 950 Uses IEC connector that meets most safety standards Operating temperature: -25°C to +70°C Compact configuration



10-BPF Series

Circuit Diagram

CX L1CY

CY

CX

3

CX L1CY

CY

CX

2

CX L1CY

CY

1

Model

10-BPF-001-5-A

10-BPF-001-5-C

10-BPF-003-5-A

10-BPF-003-5-C

10-BPF-003-5-D

10-BPF-006-5-A

10-BPF-006-5-C

10-BPF-006-5-D

10-BPF-010-5-A

10-BPF-010-5-D

RatedVoltage

(@ 50/60Hz)

120/250VAC

RatedCurrent

1A

3A

6A

10A

LeakageCurrent(Max.)

0.50mA

CY

3300pF

4700pF

3300pF

3300pF & 0.01uF

3300pF

3300pF & 0.01uF

CX

2200pF

0.01uF

3300pF & 0.01uF

0.01uF

3300pF & 0.01uF

CircuitDiagram

1

2

1

2

1

3

TemperatureRise

(Max.)

30°C

Capacitance

1.25 (32)

2.3 (62)

.13 (3.5 (2X)

1.9 (50)

1.6 (40)

1.1 (27) .07 (2)

1.8 (46)1.9(50)

.80 (20.5)+.01 -0.0

1.1 (28.5)+.01 -0.0

1.6 (40)±.007

M3 (2X)

1.4 (3.5) (2X)

1.2(30)

1.6(40)

.62 (16).82 (21) .25

(6.5)2.0 (51)

1.5 (37.5)

1.1 (28)


31

10-BPF Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

10-BPF-001;-003

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPF-001-5-A

10-BPF-001-5-C

10-BPF-003-5-A

10-BPF-003-5-C

10-BPF-006;-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPF-006-5-C

10-BPF-006-5-A

10-BPF-006-5-D

10-BPF-010-5-A

10-BPF-010-5-D

10-BPF-001;-003

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPF-001-5-A

10-BPF-001-5-C

10-BPF-003-5-A

10-BPF-003-5-C

10-BPF-006;-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPF-006-5-D

10-BPF-006-5-C

10-BPF-006-5-A

10-BPF-010-5-A

10-BPF-010-5-D

Power Entry ModulesBolt-in Rear TerminalsFor General Purpose Applications

1.6(40)

2.0 (52)

M3 (2X)

2.8 (72)

2.0 (52)

1.4 (37)

Figure C

Figure B

Figure A


Pow

er E

ntry

Mod

ules


32

Pow

er E

ntry

Mod

ules

Power Entry ModulesBolt-in Rear TerminalsFor Medical Purpose Applications

Specifications



and complies with IEC 950 Uses IEC connector that meets most safety standards Operating temperature: -25°C to +70°C Compact configuration Low leakage current



10-BPF Series

Circuit Diagram

1

E

2

3

E

4

CX

L1

Model

10-BPF-001-2-A

10-BPF-003-2-A

10-BPF-006-2-A

RatedVoltage

(@ 50/60Hz)

120/250VAC

RatedCurrent

1A

10A


5uA

CapacitanceCX

0.01uF

Inductance(L1)

3.0mH

1.5mH

0.5mH

CircuitDiagram

1

Figure

A

TemperatureRise

(Max.)

30°C


33

Power Entry ModulesBolt-in Rear TerminalsFor Medical Purpose Applications

Pow

er E

ntry

Mod

ules

10-BPF Series

0.807(20.5)


50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

10-BPF-001;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPF-001-2-A

10-BPF-003-2-A

10-BPF-006-2-A

10-BPF-001;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPF-001-2-A

10-BPF-003-2-A

10-BPF-006-2-A

1.9(50)

1.6(40)

1.2(30)

.63 (16)

.82 (21) .25(6.5)

2.0 (51)

1.5 (37.5)

1.1 (28)

.80 (20.5)+.01 -0.0

1.1 (28.5)+.01 -0.0

1.6 (40)±.007

M3 (2X)

1.4 (3.5)(2X)



and complies with IEC 950 Uses IEC connector that meets most safety standards Snap-in style saves labor and hardware inventory Wire output minimizes space and provides

economical installation Operating temperature: -25°C to +85°C



Specifications

60-SPL-010-3-20.35mA 2200pF ± 20%

22nF ± 20%

60-SPL-010-3-3250VAC 1A

33nF ± 20%6.0mH 30°C

60-SPL-010-5-20.50mA 3300pF ± 20%

22nF ± 20%

60-SPL-010-5-3 33nF ± 20%

60-SPL-020-3-20.35mA 2200pF ± 20%

22nF ± 20%

60-SPL-020-3-3250VAC 2A

33nF ± 20%2.4mH 30°C

60-SPL-020-5-20.50mA 3300pF ± 20%

22nF ± 20%

60-SPL-020-5-3 33nF ± 20%

60-SPL-030-3-20.35mA

2200pF ± 20%.022uF ± 20%

60-SPL-030-3-3250VAC 3A

3300pF ± 20%1.2mH 30°C

60-SPL-030-5-20.50mA

2200pF ± 20%.033uF ± 20%

60-SPL-030-5-3 3300pF ± 20%

60-SPL-060-3-20.35mA 2200pF ± 20%

22nF ± 20%

60-SPL-060-3-3250VAC 6A

33nF ± 20%0.53mH 45°C

60-SPL-060-5-20.50mA 3300pF ± 20%

22nF ± 20%

60-SPL-060-5-3 33nF ± 20%



60-SPL Series

1

E

2

3

E

4

CX

CY

CY

L1

Circuit Diagram



Power Entry ModulesSnap-in with Wire Leads

Pow

er E

ntry

Mod

ules

Power Entry ModulesSnap-in with Wire Leads



1.397(35.5)

.252 (6.4)

1.612 (41)

1.172 (29.8)

4.719 (120)*

.236 (6)

Blue

Green/Yellow

Brown

PVC Insulated wire

UL1617 AWG #22

.963(24.5)

* Metal caseTin Plated

* General tolerance± .012 (.3) .838 (21.3)

R2

W

.853(21.7)

Panel cutout dimensions

T :Panel ThicknessT W

.039 (1.0) 1.270 (32.3)

.047 (1.2) 1.274 (32.4)

.059 (1.5) 1.285 (32.5)

UL 1015 AWG #18

* Custom lengths available upon request.

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

60-SPL-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPL-020-5-X

60-SPL-010-5-X

60-SPL-020-3-X

60-SPL-010-3-X

60-SPL-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPL-030-5-X

60-SPL-060-5-X

60-SPL-030-3-X

60-SPL-060-3-X

60-SPL-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPL-010-X-4

60-SPL-020-X-4

60-SPL-010-X-2

60-SPL-020-X-2

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

60-SPL-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPL-030-X-4

60-SPL-060-X-4

60-SPL-030-X-2

60-SPL-060-X-2

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


60-SPL Series

Pow

er E

ntry

Mod

ules



1

E

2

3

E

4

CX

CY

CY

L1

Circuit Diagram

Power Entry ModulesBolt-in with Wire Leads


conform to FCC part 15 regulations Metal case filter offers high performance Meets over voltage of IEC 664 category II

and complies with IEC 950 Uses IEC connector that meets most safety standards Wire output for minimizing space use

and economical installation Operating temperature: -25°C to +85°C



Specifications

60-BPL-010-3-20.35mA 2200pF ± 20%

22nF ± 20%

60-BPL-010-3-3250VAC 1A

33nF ± 20%6.0mH 30°C

60-BPL-010-5-20.50mA 3300pF ± 20%

22nF ± 20%

60-BPL-010-5-3 33nF ± 20%

60-BPL-020-3-20.35mA 2200pF ± 20%

22nF ± 20%

60-BPL-020-3-3250VAC 2A

33nF ± 20%2.4mH 30°C

60-BPL-020-5-20.50mA 3300pF ± 20%

22nF ± 20%

60-BPL-020-5-3 33nF ± 20%

60-BPL-030-3-20.35mA

2200pF ± 20%.022uF ± 20%

60-BPL-030-3-3250VAC 3A

3300pF ± 20%1.2mH 30°C

60-BPL-030-5-20.50mA

2200pF ± 20%.033uF ± 20%

60-BPL-030-5-3 3300pF ± 20%

60-BPL-060-3-20.35mA 2200pF ± 20%

22nF ± 20%

60-BPL-060-3-3250VAC 6A

33nF ± 20%0.53mH 45°C

60-BPL-060-5-20.50mA 3300pF ± 20%

22nF ± 20%

60-BPL-060-5-3 33nF ± 20%



60-BPL Series

Pow

er E

ntry

Mod

ules





1.612 (41)

.252 (6.4)1.172(29.8)

* General tolerance±.012 (0.3)

Panel cutout dimensionsmounts from front side

R3.5

1.239 (31.5)

.885(22.5) .837

(21.3)

1.573 (40)

2- .118 (M3)

Panel cutout dimensionsmounts from back side

R4.5

1.180 (30)

.865 (22)

1.573 (40) 2- .130 (3.3)

1.967 (50)

1.573 (40)

1.160(29.5)

2- .142 (3.6)

.944 (24)

.830(21.1)

4.719 (120)*

BLUE

GREEN/YELLOW

BROWN

PVC Insulated wireUL1617 AWG #22

UL1015 AWG # 18

.236 (6)


50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

60-BPL-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPL-020-5-X

60-BPL-010-5-X

60-BPL-020-3-X

60-BPL-010-3-X

60-BPL-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPL-030-5-X

60-BPL-060-5-X

60-BPL-030-3-X

60-BPL-060-3-X

60-BPL-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPL-030-X-4

60-BPL-060-X-2

60-BPL-030-X-2

60-BPL-060-X-4

60-BPL-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPL-010-X-4

60-BPL-020-X-4

60-BPL-010-X-2

60-BPL-020-X-2

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


60-BPL Series

Pow

er E

ntry

Mod

ules



38

1

E

2

3

E

4

CX

CY

CY

L1

Circuit Diagram



conform to FCC part 15 regulations Metal case filter offers high performance Meets over voltage of IEC 664 category II

and complies with IEC 950 Uses IEC connector that meets most safety standards Wire output for minimizing space use

and economical installation Operating temperature: -25°C to +70°C Compact configuration



10-BPL Series

Pow

er E

ntry

Mod

ules

Specifications

Model

10-BPL-001-5-B

10-BPL-003-5-B

10-BPL-006-5-B

RatedVoltage

(@ 50/60Hz)

250VAC

RatedCurrent

1A

3A

6A


0.50mA

CY

3300pF

CX

0.01uF

Inductance(L1)

3.0mH

1.5mH

0.5mH

CircuitDiagram

1

Figure

A

TemperatureRise

(Max.)

30°C

Capacitance


39



10-BPL Series

Pow

er E

ntry

Mod

ules

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

10-BPL-001;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPL-001-5-B

10-BPL-006-5-B

10-BPL-003-5-B

10-BPL-001;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

10-BPL-001-5-B

10-BPL-006-5-B

10-BPL-003-5-B

1.9(50)

1.6(40)

1.2(30)

1.4 (3.5)(2X)

.63 (16)

.82 (21) .25(6.5)

2.0 (51)

1.5 (37.5)

1.1 (28)

.80 (20.5)+.01 -0.0

1.1 (28.5)+.01 -0.0

1.6 (40)±.007

M3 (2X)

Figure A

Power Entry ModulesSnap-in Mount



and complies with IEC 950 Uses IEC connector that meets most safety standards Snap-in style saves labor and hardware inventory Solder lug and fast-on tab terminations available Operating temperature: -25°C to +85°C



Specifications

60-XXX-010-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-010-3-4250VAC 1A

.047uF ± 20%6.0mH 30°C

60-XXX-010-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-010-5-4 .047uF ± 20%

60-XXX-020-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-020-3-4250VAC 2A

.047uF ± 20%2.4mH 30°C

60-XXX-020-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-020-5-4 .047uF ± 20%

60-XXX-030-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-030-3-4250VAC 3A

.047uF ± 20%1.2mH 30°C

60-XXX-030-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-030-5-4 .047uF ± 20%

60-XXX-060-3-20.35mA 2200pF ± 20%

.022uF ± 20%

60-XXX-060-3-4250VAC 6A

.047uF ± 20%0.53mH 45°C

60-XXX-060-5-20.50mA 3300pF ± 20%

.022uF ± 20%

60-XXX-060-5-4 .047uF ± 20%



60-SPR & SPS Series

* Substitute SPR or SPS for XXX60-SPR - Fast-on terminals60-SPS - Solder lug terminals

60-XXX-100-3-2250VAC 10A

0.35mA 2200pF ± 20%.022uF ± 20% 0.26mH 45°C

60-XXX-100-5-2 0.50mA 3300pF ± 20%

1

E

2

3

E

4

CX

CY

CY

L1

Circuit Diagram

Pow

er E

ntry

Mod

ules



60-SPR-150-3-11 250VAC 15A 0.35mA 2200pF ± 20% .01uF ± 20% 0.15mH 45°C

Power Entry ModulesSnap-in Mount


1.395(35.5)

2.033 (51.7)

1.805 (45.9)

1.418 (35.9).252 (6.4)

1.172(29.8)

.157 (4)

Solder Lug

2 X 3 hole

* Standard terminalFast-on tab #250available asSPR series2.096 (53.3)

* General tolerance± .012 (0.3)

Panel cutout dimensionsfor 1.0t chassis

R2

.853(21.7)

.837(21.3)

.963(24.5)

W

Panel cutout dimensions

T: Panel ThicknessT W

.039 (1.0) 1.270 (32.3)

.047 (1.2) 1.274 (32.4)

.059 (1.5) 1.285 (32.5)

Solder lugs shown. Also available in fast-ons.

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

60-SPX-010;-020;-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPX-010-5-X

60-SPX-020-5-X

60-SPX-030-5-X

60-SPX-060;-100

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPX-60-5-X

60-SPX-100-5-X

60-SPX-060;-100

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPX-060-X-4

60-SPX-100-X-2

60-SPX-060-X-2

60-SPX-010;-020;-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-SPX-010-X-4

60-SPX-030-X-4

60-SPX-020-X-4

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


60-SPR & SPS Series

Pow

er E

ntry

Mod

ules



Features North American and Metric fuse

holders available Fuse holder provides effective EMI suppression

of common and differential mode Suitable for products that must conform

to FCC and FTZ requirements Meets over voltage category II of IEC 664

and complies with IEC 950 Fast-on terminals or solder lug terminals Metal case provides effective EMI shielding Operating temperature: -25°C to +85°C


Applications Computers and peripheral equipment Electronic equipment Digital equipment Measuring and testing instruments Telecommunications equipment


Note: Test Voltage 1500VAC one minute, line to groundInsulation Resistance: 300 MΩ min. at 500VDCF(S) = Fast-on or (Solder lug terminals)

Voltage Drop: 1V max. at rated currentWeight: 78gInlet: Compatible with IEC-320

Specifications

64-XXX-020-3-11 0.35mA0.50mA

2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%2200pF ± 20%3300pF ± 20%

0.35mA0.50mA0.35mA0.50mA0.35mA0.50mA0.35mA0.50mA0.35mA0.50mA0.20mA0.25mA0.20mA0.25mA0.20mA0.25mA0.20mA0.25mA0.20mA0.25mA0.20mA0.25mA

64-XXX-020-5-11250VAC 2A

0.1uF

0.22uF

0.1uF

0.22uF

0.1uF

0.22uF

0.1uF

0.22uF

0.1uF

0.22uF

0.1uF

0.22uF

4A

6A

40°C

45°C

45°C

40°C

45°C

45°C

6.5mH

4.2mH

1.6mH

6.5mH

4.2mH

1.6mH

2A

4A

6A

250VAC

250VAC

125VAC

125VAC

125VAC

64-XXX-020-3-1264-XXX-020-5-1264-XXX-040-3-1164-XXX-040-5-1164-XXX-040-3-1264-XXX-040-5-1264-XXX-060-3-1164-XXX-060-5-1164-XXX-060-3-1264-XXX-060-5-1265-XXX-020-3-1165-XXX-020-5-1165-XXX-020-3-1265-XXX-020-5-1265-XXX-040-3-1165-XXX-040-5-1165-XXX-040-3-1265-XXX-040-5-1265-XXX-060-3-1165-XXX-060-5-1165-XXX-060-3-1265-XXX-060-5-12

Fused Filtered Power Entry ModulesFor General Purpose Applications

Circuit Diagram

L

N

L

N

E E

L1

R CX

CY

CY

Fuse

d Fi

lter

ed

Pow

er E

ntry

Mod

ules



* Substitute BFF or BFS for XXXBFF - Fast-on terminalsBFS - Solder lug terminals

64-65-BFF/64-65-BFS Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp

4 Amp

0.35 mA Leakage Versions


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp

4 Amp

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

4 Amp

6 Amp

10


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

4 Amp6 Amp

10


Fuse cover

1.376 (35)

1.298 (33) 2 - .13

(2 - 3.3 )Hole

1.738 (44.2)

1.416±.008(36±0.2)

1.101 (28)

1.616 (41.1) 1.14(29)

1.29 (32.8)

Fast-on tab#250t= .031 (0.8)

2.32 (59)

.098 (2.5)

0.252 (6.4)

* General Tolerance:±.020 (0.5)

* Metal Case

+0.2 -0.1

0.158 (4.0)

2.249 (L:57.2)

+.008 -.004

* Alternate Terminal for 64/65-BFS-Solder Lug Terminal

Fused Filtered Power Entry ModulesFor General Purpose Applications

Dimensions64/65-BFF Series

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)



Fuse

d Fi

lter

edPo

wer

Ent

ry M

odul

es


Applications Medical equipment Electronic equipment Digital equipment Industrial equipment

Features Metric and North American fuse

holders available Fuse holder provides effective EMI suppression

of common and differential mode Suitable for products that must conform


and complies with IEC 950 Fast-on terminations or solder lug terminations Metal case provides effective EMI shielding Provides susceptibility protection without the leakage

current associated with line-to-ground capacitance Reduces the line to ground capacitance in order

to meet patient care requirements Operating temperature: -25°C to +85°C


Telecommunications equipment Measuring and testing instruments Personal computers

and peripherals

Fused Filtered Power Entry ModulesFor Medical or General Purpose Applications

L

N

L

N

E E

L

N

L

N

E E

LIN

E

LOA

D

LIN

E

LOA

DR CX

L1

R CX

L1 CY

CY

Circuit Diagrams66/67-BFF(S)-XXX-1-X Filter

66/67-BFF(S)-XXX-0-X and66/67-BFF(S)-XXX-4-X FiltersFu

sed

Filt

ered

Pow

er E

ntry

Mod

ules




Specifications

Note: Test Voltage 1500VAC one minute, line to groundInsulation Resistance: 300 MΩ min. at 500VDCF(S) = Fast-on or (Solder lug terminals)


* Substitute BFF or BFS for XXXBFF - Fast-on terminalsBFS - Solder lug terminals

66-XXX-020-1-1166-XXX-020-1-1266-XXX-020-0-1166-XXX-020-4-1166-XXX-020-0-1266-XXX-020-4-1266-XXX-040-1-1166-XXX-040-1-1266-XXX-040-0-1166-XXX-040-4-1166-XXX-040-0-1266-XXX-040-4-1266-XXX-060-1-1166-XXX-060-1-1266-XXX-060-0-1166-XXX-060-4-1166-XXX-060-0-1266-XXX-060-4-1267-XXX-020-1-1167-XXX-020-1-1267-XXX-020-0-1167-XXX-020-4-1167-XXX-020-0-1267-XXX-020-4-1267-XXX-040-1-1167-XXX-040-1-1267-XXX-040-0-1167-XXX-040-4-1167-XXX-040-0-1267-XXX-040-4-1267-XXX-060-1-1167-XXX-060-1-1267-XXX-060-0-1167-XXX-060-4-1167-XXX-060-0-1267-XXX-060-4-12

250VAC 2A 40°C6.5mH

4.2mH

1.6mH

6.5mH

4.2mH

1.6mH

45°C

45°C

40°C

45°C

45°C

0.01mA none

none

none

none

none

none

0.1mA

0.1mA

0.075mA0.22uF0.1uF

0.1uF

0.22uF

0.22uF0.1uF

0.1uF

0.22uF

0.22uF0.1uF

0.1uF

0.22uF

0.22uF0.1uF

0.1uF

0.22uF

0.22uF0.1uF

0.1uF

0.22uF

0.22uF0.1uF

0.1uF

0.22uF

330pF ± 20%470pF ± 20%330pF ± 20%470pF ± 20%

330pF ± 20%470pF ± 20%330pF ± 20%470pF ± 20%

330pF ± 20%470pF ± 20%330pF ± 20%470pF ± 20%

330pF ± 20%470pF ± 20%330pF ± 20%470pF ± 20%

330pF ± 20%470pF ± 20%330pF ± 20%470pF ± 20%

330pF ± 20%470pF ± 20%330pF ± 20%470pF ± 20%

0.075mA

0.01mA

0.1mA

0.1mA

0.075mA

0.075mA

0.01mA

0.1mA

0.1mA

0.075mA

0.075mA

0.005mA

0.05mA

0.05mA

0.035mA

0.035mA

0.005mA

0.05mA

0.05mA

0.035mA

0.035mA

0.005mA

0.05mA

0.05mA

0.035mA

0.035mA

4A

6A

2A

4A

6A

250VAC

250VAC

125VAC

125VAC

125VAC


50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

0.075 and 0.1 mA Leakage Current

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp4 Amp


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp

4 Amp

Fused Filtered Power Entry ModulesFor Medical or General Purpose Applications



0.01 mA Leakage Current

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp4 Amp


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp

4 Amp

Fuse cover

1.376 (35)

1.298 (33) 2 - .13

(2 - 3.3 )Hole

1.738 (44.2)

1.416±.008(36±0.2)

1.101 (28)

1.616 (41.1) 1.14(29)

1.29 (32.8)

Fast-on tab#250t= .031 (0.8)

2.32 (59)

.098 (2.5)

0.252 (6.4)

* General Tolerance:±.020 (0.5)

* Metal Case

+0.2 -0.1

0.158 (4.0)

2.249 (L:57.2)

+.008 -.004

* Alternate Terminal for 66/67-BFS-Solder Lug Terminal

Dimensions66-67-BFF/66-67-BFS Series

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)



Fuse

d Fi

lter

edPo

wer

Ent

ry M

odul

es


Circuit DiagramL

N

L

N

E ERCX

CY

CY

CX

Features North American and Metric fuse

holders available Fuse holder and double pole power ON/OFF switch

provided in a convenient/compact package Suitable for products that must conform


and complies with IEC 950 Metal case provides effective EMI shielding Easy access fuse drawer with space for spare fuse Flange-mounted or snap-in styles available

for quick mounting Operating temperature: -25°C to +85°C


Switched and Fused FilteredPower Entry ModulesFor General Purpose Applications

Swit

ched

and

Fus

ed F

ilte

red

Pow

er E

ntry

Mod

ules



Applications Computers and

peripheral equipment Electronic equipment

Digital equipment Measuring and testing instruments Telecommunications equipment

Note: Test Voltage 1500VAC one minute, line to groundInsulation Resistance: 300 MΩ min. at 500VDCB(S) = Bolt-in terminals or (Snap-in terminals)


* Substitute BSF or SSF for XXXBSF - Bolt-in switched and fusedSSF - Snap-in switched and fused

SpecificationsModel*

Rated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY CX1 CX2 (L1) Rise (Max.)

64-XXX-020-3-1264-XXX-020-3-0464-XXX-020-3-1464-XXX-020-3-0664-XXX-020-5-1264-XXX-020-5-0464-XXX-020-5-1464-XXX-020-5-0664-XXX-040-3-1264-XXX-040-3-0464-XXX-040-3-1464-XXX-040-3-0664-XXX-040-5-1264-XXX-040-5-0464-XXX-040-5-1464-XXX-040-5-0664-XXX-060-3-1264-XXX-060-3-0464-XXX-060-3-1464-XXX-060-3-0664-XXX-060-5-1264-XXX-060-5-0464-XXX-060-5-1464-XXX-060-5-0665-XXX-020-3-1265-XXX-020-3-0465-XXX-020-3-1465-XXX-020-3-0665-XXX-020-5-1265-XXX-020-5-0465-XXX-020-5-1465-XXX-020-5-0665-XXX-040-3-1265-XXX-040-3-0465-XXX-040-3-1465-XXX-040-3-0665-XXX-040-5-1265-XXX-040-5-0465-XXX-040-5-1465-XXX-040-5-0665-XXX-060-3-1265-XXX-060-3-0465-XXX-060-3-1465-XXX-060-3-0665-XXX-060-5-1265-XXX-060-5-0465-XXX-060-5-1465-XXX-060-5-06

250VAC

250VAC

250VAC

125VAC

125VAC

125VAC

2A 45°C10.5mH

10.5mH

4.2mH

4.2mH

1.6mH

1.6mH

45°C

45°C

45°C

45°C

45°C

0.35mA 2200pF

3300pF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

2200pF

3300pF

2200pF

3300pF

2200pF

3300pF

2200pF

2200pF

0.50mA

0.35mA

0.50mA

0.35mA

0.50mA

0.35mA

0.50mA

0.35mA

0.50mA

0.35mA

0.50mA

4A

6A

NONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uFNONE0.22uFNONE0.47uF

2A

4A

6A

64-65-BSF/64-65-SSF Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

.248(6.3)

2.556 (65)

2.348 (59.7)

1.313 (33.4)1.101 (28)

Fast-on tab #250

2.273 (57.8)

1.133(28.8)

2.340 (59.5)

Panel cutout dimensionmount from back side

1.514 (38.8)

A

R .079(2.0)

Thickness of Panel A.031 (0.8t) 2.430 (61.8±0.1).039 (1.0t) 2.446 (62.2±0.1).047 (1.2t) 2.462 (62.6±0.1).059 (1.5t) 2.470 (62.8±0.1).071 (1.8t) 2.473 (62.9±0.1).079 (2.0t) 2.477 (63.0±0.1)

* General Tolerance± .039 (1.0)

* Metal Case

1.16(29.5 )+0.5

-0

+.02-0

t= .031 (0.8)



Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

2 Amp

4 Amp

6 Amp

90


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

2 Amp

4 Amp

6 Amp

90

64/65-B(S)SF-*-*-02(04,06)

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

00.1 0.2 0.5 1 2 5 10 20 50

6 Amp

90

100

4 Amp

2 Amp

64/65-B(S)SF-*-*-11(12,14)

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

00.1 0.2 0.5 1 2 5 10 20 50

6 Amp

90

100

4 Amp

2 Amp

.248(6.3)

2.556 (65)

2.348 (59.7) Ø.142

(3.6)

1.947 (49.5)

1.573 (40±0.2)

1.101 (28)

Fast-on Tab #250

2.273 (57.8) 1.133(28.8)

2.340(59.5)

1.573 (40.±0.2)

2.399 (61)

Panel cutoutdimensionmount fromback side

R .059(1.5)

2 - .142(3.6) Hole

1.526 (38.8)

1.16±(29.5± )0.5

0

.3340

t= .031 (0.8)

Switched and Fused FilteredPower Entry ModulesFor General Purpose Applications

64/65-SSF SeriesDimensions64/65-BSF Series


Swit

ched

and

Fus

ed F

ilte

red

Pow

er E

ntry

Mod

ules


120

100

80

60

40

20

020 30 40 50 60 70 80 90


Curr

ent (

%)


L

N

L

N

E E

CY1

CY2

LIN

E

LOA

D

RCX1

L1CX2

Note: CY1 and CY2 capacitorsomitted on 66/67 B(S)F-XXX-1-X Filters

Circuit Diagram

Weight: 130gInlet: Compatible with IEC-320 B(S) = Bolt-in terminals or (Snap-in terminals)

* Substitute BSF or SSF for XXXBSF - Bolt-In Switched and FusedSSF - Snap-In Switched and Fused

Features Metric and North American fuse holders available Fuse holder and a double pole power ON/OFF switch

provides a convenient/compact package Suitable for products that must conform


and complies with IEC 950 Provides susceptibility protection without the leakage

current associated with line-to-ground capacitors Designed to meet requirements for non-patient

and patient care equipment Metal case provides effective EMI shielding Easy access fuse drawer - space for spare fuse Flange-mounted or snap-in styles available

for quick mounting Operating temperature: -25°C to +85°C


Applications Medical equipment Industrial equipment Telecommunications equipment Measuring and testing instruments

Digital equipment (including switching power supplies)

General purpose filter forsusceptibility or high frequency“clean up” applications

Switched and Fused Filtered Power Entry ModulesFor Medical or General Purpose Applications


10.5mH

4.2mH

1.6mH

2A

4A

6A

125VAC

40°C

45°C


NONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uF

Note: Test Voltage: 1500VAC one minute, line to groundInsulation Resistance: 300 MΩ min. at 500VDCVoltage Drop: 1V max. at rated current

Rated Rated Leakage Temp.Model* Voltage Current Current Capacitance Induct. Rise

50/60Hz (Max.) CY CX1 CX2 (L1) (Max.)

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

330pF

NONE

470pF

330pF

NONE

470pF

330pF

NONE

470pF

0.04mA

.005mA

0.05mA

0.04mA

.005mA

0.05mA

0.04mA

.005mA

0.05mA

Specifications

10.5mH

4.2mH

1.6mH

2A

4A

6A

250VAC

40°C

45°C


NONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uFNONE0.22uF

Rated Rated Leakage Temp.Model* Voltage Current Current Capacitance Induct. Rise

50/60Hz (Max.) CY CX1 CX2 (L1) (Max.)

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

0.22uF

0.47uF

330pF

NONE

470pF

330pF

NONE

470pF

330pF

NONE

470pF

.075mA

.01mA

0.1mA

.075mA

.01mA

.01mA

.075mA

.01mA

0.1mA

Tested and found to beIAW VDE 0565 Part 3

Swit

ched

and

Fus

ed F

ilte

red

Pow

er E

ntry

Mod

ules

66-67-BSF/66-67-SSF Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp4 Amp


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp

4 Amp

Switched and Fused Filtered Power Entry ModulesFor Medical or General Purpose Applications



Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp4 Amp


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

90

2 Amp

6 Amp

4 Amp

Dimensions

.248(6.3)

2.556 (65)

2.348 (59.7)

1.313 (33.4)1.101 (28)

Fast-on tab #250

2.273 (57.8)

1.133(28.8)

2.340 (59.5)

Panel cutout dimensionmount from back side

1.514 (38.8)

A

R .079(2.0)

Thickness of Panel A.031 (0.8t) 2.430 (61.8±0.1).039 (1.0t) 2.446 (62.2±0.1).047 (1.2t) 2.462 (62.6±0.1).059 (1.5t) 2.470 (62.8±0.1).071 (1.8t) 2.473 (62.9±0.1).079 (2.0t) 2.477 (63.0±0.1)

* General Tolerance± .039 (1.0)

* Metal Case

1.16(29.5 )+0.5

-0

+.02-0

t= .031 (0.8)

.248(6.3)

2.556 (65)

2.348 (59.7) Ø.142

(3.6)

1.947 (49.5)

1.573 (40±0.2)

1.101 (28)

Fast-on Tab #250

2.273 (57.8) 1.133(28.8)

2.340(59.5)

1.573 (40.±0.2)

2.399 (61)


R .059(1.5)

2 - .142(3.6) Hole

1.526 (38.8)

1.16(29.5 )+0.5

-0

+.02-0

t= .031 (0.8)

66/67-BSF Series 66/67-SSF Series


120

100

80

60

40

20

020 30 40 50 60 70 80 90


Curr

ent (

%)



Swit

ched

and

Fus

ed F

ilte

red

Pow

er E

ntry

Mod

ules

Features Dual fuse for European applications Fuse holder and double pole power ON/OFF switch

provides a convenient/compact package Suitable for products that must conform


and complies with IEC 950 Metal case provides effective EMI shielding IEC connector meets the safety standards of most

certifying agencies Easy access fuse drawer Flange-mounted UL, CSA, and SEMKO approved Designed to be in accordance with VDE 0565, part 3 Operating temperature: -25°C to +85°C


Applications Computers and peripheral equipment Electronic equipment Digital equipment Measuring and testing instruments Telecommunications equipment

Switched and Fused Filtered Power Entry ModulesDual Fuse for European Applications

Note: Test Voltage 1500VAC one minute, line to groundInsulation Resistance: 300 MΩ min. at 500VDCVoltage Drop: 1V max. at rated currentWeight: 130gInlet: Compatible with IEC-320 B(S) = Bolt-in terminals or (Snap-in terminals)

L

N

L

N

E E

CY1

CY2

CX2

L1

L2

CX1R1

SW

FUSE

Circuit Diagram


Specifications

68-BSF-020-3-012A

0.1uF 0.1uF10.5mH

68-BSF-020-3-04 0.22uF 0.22uF

68-BSF-040-3-01250VAC 4A 0.35mA 2200pF 2200pF

0.1uF 0.1uF4.2mH 45°C

68-BSF-040-3-04 0.22uF 0.22uF

68-BSF-060-3-016A

0.1uF 0.1uF1.6mH

68-BSF-060-3-04 0.22uF 0.22uF

ModelRated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY1 CY2 CX1 CX2 (L1) Rise (Max.)

Swit

ched

and

Fus

ed F

ilte

red

Pow

er E

ntry

Mod

ules

68-BSF Series

Switched and Fused Filtered Power Entry ModulesDual Fuse for European Applications

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)

Temperature Characteristics.248(6.3)

2.556 (65)

2.348 (59.7) Ø.142

(3.6)

1.947 (49.5)

1.573 (40±0.2)

1.101 (28)

Fast-on Tab #250

2.273 (57.8) 1.133(28.8)

2.340(59.5)

1.573 (40.±0.2)

2.399 (61)


R .059(1.5)

2 - .142(3.6) Hole

1.526 (38.8)

1.16(29.5 )+0.5

-0

+.02-0

t= .031 (0.8)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

2 Amp4 Amp

6 Amp

90

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

00.1 0.2 0.5 1 2 5 10 20 50

6 Amp

90

100

4 Amp

2 Amp


Swit

ched

and

Fus

ed F

ilte

red

Pow

er E

ntry

Mod

ules


68-BSF Series

PCB

Pow

er F

ilte

rs

PCB Power FiltersMiniature Printed Circuit Board

Features Miniature general purpose PCB mounted filter Requires minimal PCB real estate space Low cost Designed for two wire cord systems For three wire cord systems, Y capacitors

can be attached externally Operating temperature: -25°C to +85°C


Applications Personal computers and peripherals Digital equipment Measuring instruments and medical equipment TV & VCR monitors and display units Home appliances

Note: Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. at rated currentWeight: 17.5g

61-MPC Series

1 3

2 4

L1

CX1 CX1

Circuit Diagram


Specifications

61-MPC-010-1-11 1A 11mH

61-MPC-016-1-11250VAC

1.6A0.1mA 0.01uF 0.01uF

6.0mH40°C

61-MPC-025-1-11 2.5A 2.4mH

61-MPC-036-1-11 3.6A 1.2mH

ModelRated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CX1 CX2 (L1) Rise (Max.)


PCB

Pow

er F

ilte

rs

61-MPC Series


Common Mode

Normal Mode


50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

61-MPC

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

61-MPC-010-1-11

61-MPC-036-1-11

61-MPC-025-1-11

61-MPC-016-1-11

Y Cap2 X 3300pF

61-MPC

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

61-MPC-036-1-11

61-MPC-025-1-11

61-MPC-016-1-11

61-MPC-010-1-11

61-MPC

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

61-MPC-036-1-11

61-MPC-010-1-11

61-MPC-025-1-11

61-MPC-016-1-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

1 2

3 4

.767 (19.5)

1.239 (31.5)

.767 (19.5)

.059 (1.5)

.354 (9)

4 — .031 (.8)

.551 (14)

.590 (15)

Commonmode withY cap.(Test circuit 1)

(Test circuit 2)

(Test circuit 3)

120

100

80

60

40

20

030 40 50 60 70 80 90


Cur

rent

(%)

0 100





and complies with IEC 950 Uses IEC connector that meets most safety standards

Solder lug, Fast-on tab styles available (see page 26) PCB mounting style minimizes space and provides

economical installation Operating temperature: -25°C to +85°C




60-BPP Series

1

E

2

3

E

4

CX

CY

CY

L1

Circuit Diagram

Power Entry ModulesBolt-in Right Angle Terminalsfor PCB Applications

PCB

Pow

er F

ilte

rs


Specifications

60-BPP-010-3-2 0.35mA 2200pF0.022uF

60-BPP-010-3-4 1A0.047uF

6.0mH60-BPP-010-5-2 0.50mA 3300pF

0.022uF

60-BPP-010-5-4 0.047uF

60-BPP-020-3-2 0.35mA 2200pF0.022uF

60-BPP-020-3-4 2A0.047uF

2.4mH 30°C60-BPP-020-5-2 0.50mA 3300pF

0.022uF

60-BPP-020-5-4 0.047uF

60-BPP-030-3-2 0.35mA 2200pF0.022uF

60-BPP-030-3-4 3A0.047uF

1.2mH60-BPP-030-5-2 0.50mA 3300pF

0.022uF

60-BPP-030-5-4 0.047uF

60-BPP-060-3-2 0.35mA 2200pF0.022uF

60-BPP-060-3-4 6A0.047uF

0.53mH 45°C60-BPP-060-5-2 0.50mA 3300pF

0.022uF

60-BPP-060-5-4 0.047uF


250VAC




1.180 (30)


R4.5

1.180 (30)

.865 (22)

1.573 (40)2- .142 (3.6)

1.967 (50)

1.573 (40)

2- .142 (3.6)

.885(22.5)

1.463 (37.2)

1.317(33.5)

.098 (2.5)

.991(25.2).590 (15)

.142(3.6).059

(1.5)

.047 (1.2)

1.070(27.2)

.232 (5.9)

.708 (18)

.024 (.6)

.031 (.8)

.779(19.8)

* Generaltolerance± .012 (.3)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

60-BPP-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPP-010-3-X

60-BPP-020-3-X

60-BPP-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPP-030-3-X

60-BPP-060-3-X

60-BPP-010;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPP-010-X-4

60-BPP-020-X-4

60-BPP-030;-060

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

60-BPP-030-X-4

60-BPP-060-X-4

60-BPPPCBMountingType

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


60-BPP Series

Power Entry ModulesBolt-in Right Angle Terminalsfor PCB Applications

PCB

Pow

er F

ilte

rs



conform to FCC part 15 regulations Metal cased filter offers high performance Meets over voltage of IEC 664 category II

and complies with IEC 950 Solder lug, Fast-on tab styles available (see page 28) PCB mounting minimizes space and provides

economical installation Excellent filtering characteristics for high frequencies Earth coil standard Operating temperature: -25°C to +85°C



Power Entry ModulesHigh Frequency AttenuationBolt-in for PCB Applications


60-BHP Series

1

E

2

3

E

4

CX

CY

CY

L1

L2

Circuit Diagram

PCB

Pow

er F

ilte

rs


Specifications

60-BHP-010-3-110.35mA 2200pF±20%

0.1uF±20%

60-BHP-010-3-41A

.047uF±20%6mH

60-BHP-010-5-110.50mA 3300pF±20%

0.1uF±20%

60-BHP-010-5-4 .047uF±20%

60-BHP-020-3-110.35mA 2200pF±20%

0.1uF±20%

60-BHP-020-3-42A

.047uF±20%2.4mH 30°C

60-BHP-020-5-110.50mA 3300pF±20%

0.1uF±20%

60-BHP-020-5-4 .047uF±20%

60-BHP-030-3-110.35mA 2200pF±20%

0.1uF±20%

60-BHP-030-3-43A

.047uF±20%1.2mH

60-BHP-030-5-110.50mA 3300pF±20%

0.1uF±20%

60-BHP-030-5-4 .047uF±20%

60-BHP-060-3-110.35mA 2200pF±20%

0.1uF±20%

60-BHP-060-3-46A

.047uF±20%0.53mH 45°C

60-BHP-060-5-110.50mA 3300pF±20%

0.1uF±20%

60-BHP-060-5-4 .047uF±20%

ModelRated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY CX (L1) (L2) Rise (Max.)

18.3 uH250VAC




1.180 (30)


R4.5

1.180 (30)

.865 (22)

1.573 (40)2- .142 (3.6)

1.967 (50)1.573 (40)

2- .142 (3.6)

.885(22.5)

1.534 (39)1.389(35.3)

.098(2.5)

.991(25.2).590 (15)

.142 (3.6)

.059(1.5)

.047 (1.2)

1.070(27.2)

.232 (5.9)

.708 (18)

.024 (.6)

.031 (.8)

.779(19.8)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHP-060-X-11

60-BHP-030-X-11

60-BHP-020-X-11

60-BHP-010-X-11

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHP-060-X-4

60-BHP-030-X-4

60-BHP-020-X-4

60-BHP-010-X-4

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHP-060-3-11

60-BHP-030-3-11

60-BHP-010-3-11

60-BHP-020-3-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

60-BHP-060-3-4

60-BHP-030-3-4

60-BHP-010-3-4

60-BHP-020-3-4

60-BHP-XXX-X-11

60-BHP-XXX-X-4 60-BHP-XXX-3-4

60-BHP-XXX-3-11

60-BHPPCBMountingType

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


60-BHP Series

Power Entry ModulesHigh Frequency AttenuationBolt-in for PCB Applications

PCB

Pow

er F

ilte

rs



58

PCB

Pow

er F

ilte

rs


Features Miniature general purpose PCB mounted filter Requires minimal PCB real estate space Low cost Operating temperature: -25°C to +70°C Two forms of cases are available:

metal case and plastic case

Applications Personal computers and peripherals Digital equipment Measuring instruments and medical equipment TV & VCR monitors and display units Home appliances

Note: Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. at rated currentWeight: 17.5g

11-MPC Series

Circuit 1

Circuit 2

Circuit 3

Circuit Diagram

Specifications

Model

11-MPC-001-2-B

11-MPC-001-5-A

11-MPC-001-5-B

11-MPC-002-5-B

11-MPC-002-5-D

11-MPC-003-5-E

11-MPC-006-5-B

11-MPC-006-5-C

11-MPC-016-5-B

Rated Voltage(@ 50/60Hz)

120/250VAC

RatedCurrent

1A

2A

3A

6A

16A

Leakage Current(Max.)

5uA

0.50mA

0.2mA

CircuitDiagram

1

2

3

2

4

Figure

B

A

B

D

E

B

C

B

Temperature Rise(Max.)

30°C


59

PCB

Pow

er F

ilte

rs

11-MPC Series


50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

11-MPC-001;-002

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

11-MPC-001-5-A

11-MPC-002-5-B

11-MPC-001-2-B

11-MPC-001-5-B

11-MPC-002-5-D

11-MPC-003;-006;-016

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

11-MPC-003-5-E

11-MPC-016-5-B

11-MPC-006-5-B

11-MPC-006-5-C

11-MPC-001;-002

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

11-MPC-001-5-A

11-MPC-001-2-B

11-MPC-001-5-B

11-MPC-002-5-B

11-MPC-002-5-D

11-MPC-003;-006;-016

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

11-MPC-003-5-E

11-MPC-006-5-B

11-MPC-006-5-C

11-MPC-016-5-B

2.0(51)

1.4 (36)

0.9 (25)

2.5 (64)

0.9(25)±.007

0.6 (15)±.03

Figure B

0.6(16)

0.6(15)

0.9 (25) 0.4(10)

0.9(25)

0.6(16)

Figure A

0.6(16)

0.6 (15)±.07

0.3 (8)

0.3 (8)1.1(28)

1.4 (36)

1.8 (45)

0.03 (1) (5X)

Figure D

1.4 (35.5)

.45(11.5)

1.9 (49)

.45(11.5)

1.4(35)

1.1 (27) .15(4)

Figure E

1.9 (30)

.79 (20)1.1 (29)

1.7 (44)

.30 (7.5)

.60(15)±.07

.30 (7.5)

.03 (1) (5X)

Figure C


Features Low-cost plastic case Compact design requires minimal real estate space Suitable for products that must conform

to FCC regulations Wide variety of circuit and filtering options Good filtering characteristics for both normal mode

and common mode Epoxy molded for reliability Operating temperature: -25°C to +85°C


Applications Personal computers and peripherals Digital equipment Industrial equipment Vending machines Home appliances Office equipment

Pow

er L

ine

Filt

ers 62-A*L

Series

62-A*CSeries

* R= w/ Bleeder Resistor F = w/o Bleeder Resistor

L

L

CX

CX

CY1

CY1

CY2

CY2

R

R

Circuit Diagrams

Power Line FiltersAppliance Filters

Note: All types are designed to meet the requirement of UL 1283, CSA 22.2. VDE 0565-3Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max.


.629(16.0)

Fast-on tab #110

.177 x .138 (4.5 x 3.5)

.263 (6.7)

.657(16.7)

.371(9.4)

1.527 (38.8).371(9.4)

1.573 (40.0)

.994 (24.0)

1.220(31.0)

.374 (9.5)



Specifications

62-AFL-010-3-110.35mA 2200pF

3300pF0.50mA

0.35mA

0.50mA

0.35mA

0.50mA

62-AFC-010-3-111.0A

0.1uF

1.6A

3.0A 40°C

11.0mH

6.0mH

2.4mH

1.0mH

0.53mH

4.5A

6.0A

250VAC

62-AFL-010-5-1162-AFC-010-5-1162-AFL-016-3-1162-AFC-016-3-1162-AFL-016-5-1162-AFC-016-5-1162-AFL-030-3-1162-AFC-030-3-1162-AFL-030-5-1162-AFC-030-5-1162-AFL-045-3-1162-AFC-045-3-1162-AFL-045-5-1162-AFC-045-5-1162-AFL-060-3-1162-AFC-060-3-1162-AFL-060-5-1162-AFC-060-5-11

0.35mA

0.50mA

0.35mA

0.50mA

2200pF

3300pF

2200pF

3300pF

2200pF

3300pF

2200pF

3300pF

* Available with bleeder resistorReplace F with R for part number


62-AL/62-AC Series

Pow

er L

ine

Filt

ers

62-AL/62-AC Series

Power Line FiltersAppliance Filters

Common Mode

Normal Mode

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFL-xxx-5-11

62-AFL-010-5-11

62-AFL-030-5-1162-AFL-016-5-11

62-AFL-045-5-11

62-AFL-060-5-11

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFC-XXX-3-11

62-AFC-010-3-11

62-AFC-030-3-11

62-AFC-016-3-11

62-AFC-045-3-1162-AFC-060-3-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFC-XXX-3-11

62-AFC-010-3-11

62-AFC-030-3-11

62-AFC-016-3-11

62-AFC-045-3-11

62-AFC-060-3-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFL-xxx-3-11

62-AFL-010-3-11

62-AFL-030-3-11

62-AFL-016-3-11

62-AFL-045-3-11

62-AFL-060-3-11

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFC-xxx-5-11

62-AFC-010-5-11

62-AFC-030-5-1162-AFC-016-5-11

62-AFC-045-5-11

62-AFC-060-5-11

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFL-xxx-5-11

62-AFL-010-5-11

62-AFL-030-5-11

62-AFL-016-5-11

62-AFL-045-5-11

62-AFL-060-5-11

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFL-XXX-3-11

62-AFL-010-3-11

62-AFL-030-3-11

62-AFL-016-3-11

62-AFL-045-3-11

62-AFL-060-3-11In

sert

ion

Loss

(dB

)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-AFC-xxx-5-11

62-AFC-010-5-11

62-AFC-030-5-1162-AFC-016-5-11

62-AFC-045-5-11

62-AFC-060-5-11


Normal Mode

Features Low-cost plastic case Compact design requires minimal real estate space Suitable for products that must conform

to FCC and FTZ regulations Wide variety of circuit and filtering options Good filtering characteristics for both normal mode

and common mode Epoxy molded for reliability Operating temperature: -25°C to +85°C


Applications Personal computers and peripherals Digital equipment Industrial equipment Vending machines Office equipment

62-PQF*Series

62-PPF*Series

62-PRF*Series

* Bleeder Resistor is available only for62-P(Q/R/P)F-XXX-X-12

R

R

R

L1

L1

L1

L1

CX

CX

CX CY

CY

CY

CY

CY

CY

Circuit Diagrams

Power Line FiltersSingle Stage

Note: All types are designed to meet the requirement of UL 1283, CSA 22.2. VDE 0565-3Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. (except 62-PRF-010-5-11) at rated current

62-PRF-010-5-11: 1.5V max. at rated currentWeight: 62-PPF & PQF Series: 2.11 ounces (60 grams)

62-PRF Series: 1.76 ounces (50 grams)

62-PPF/PQF/PRF Series

Pow

er L

ine

Filt

ers



Specifications

62-PQF-020-5-11

0.50mA

62-PQF-020-5-122A

0.1uF

3A

6A

30°C

15mH

8mH

2.1mH

1A

3A

250VAC

62-PPF-020-5-1162-PPF-020-5-1262-PQF-030-5-1162-PQF-030-5-1262-PPF-030-5-1162-PPF-030-5-1262-PQF-060-5-1162-PQF-060-5-1262-PPF-060-5-1162-PPF-060-5-1262-PRF-010-5-1162-PRF-010-5-1262-PRF-020-5-1162-PRF-020-5-1262-PRF-030-5-1162-PRF-030-5-12

3300pF

2A

.22uF0.1uF.22uF0.1uF.22uF0.1uF.22uF0.1uF.22uF0.1uF.22uF0.1uF.22uF0.1uF.22uF0.1uF.22uF

486uH

97uH

181uH



Common Mode

Normal Mode


Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-PRF-010-5-11

62-PRF-010-5-12

62-PRF-030-5-11

62-PRF-030-5-12

62-PRF Series62-P(P/Q/R)F Series

62-PPF Series

62-PQF Series

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-PPF-020-5-12

62-PPF-020-5-11

62-PPF-060-5-11

62-PPF-060-5-12

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-PQF-020-5-12

62-PQF-020-5-11

62-PQF-060-5-11

62-PQF-060-5-12

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-P(Q/P)-060-5-11

62-P(Q/P)-020-5-11

62-P(Q/P)-030-5-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

.786 (20)

1.573 (40)

Fast-on tab #110

.177 x .138 (4.5 x 3.5)

.590 (15)

.904 (23)

.354 (9)

1.947 (49.5).354 (9)

2.006 (51)

1.265 (32)

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


Also available with .250 Fast-ons

62-PPF/PQF/PRF Series

Pow

er L

ine

Filt

ers


Features Compact design requires minimal real estate space Suitable for products that must conform

to FCC and FTZ regulations Excellent attenuation for high voltage impulse Metal case provides effective shielding Excellent filtering characteristics for both normal mode

and common mode Structure provides effective shielding for noise

generated externally and internally Operating temperature: -25°C to +85°C


Applications Digital equipment Personal computers and peripherals Measuring instruments Medical equipment Factory automation equipment

1

2

3

E

4

RCX

L1

CX

CY

CY

Circuit Diagram

Power Line FiltersSingle Stage Wire Leads

Note: All types are designed to meet the requirement of UL 1283, CSA 22.2. VDE 0565-3Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. at rated currentWeight: 62-PML-015 Series: 3.06 ounces (87 grams)

62-PML-030 Series: 3.17 ounces (90 grams)62-PML-050 Series: 3.28 ounces (93 grams)

Discharge time: 0.4 sec. max.

62-PML Series

Pow

er L

ine

Filt

ers


Specifications

62-PML-015-3-11

62-PML-015-5-11

62-PML-030-3-11

62-PML-030-5-11

62-PML-050-3-11

62-PML-050-5-11

62-PML-100-5-11


250VAC

1.5A

3A

5A

0.35mA

0.50mA

0.35mA

0.50mA

0.35mA

0.50mA

0.50mA

2200pF

3300pF

2200pF

3300pF

2200pF

3300pF

3300pF

0.1uF

10.0mH

4.3mH

2.4mH

2.2mH

30°C

10A


Power Line FiltersSingle Stage Wire Leads


62-PML 62-PML

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

62-PML-030-5-21

62-PML-050-5-21

62-PML-015-5-21

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-PML-015-5-11

62-PML-030-5-11

62-PML-050-5-11


BK

BK

PVCInsulated wireAWG # 20 UL1015

WH

G/Y

WH

1.573 (40)

2 — .138 x .181 (3.5 x 4.6)

1.219 (31)

.629 (16)

.944 (24)

.786 (20) 1.966

(50)

5.112* (130)

.395 (10).395 (10)

1.856 (47.2)5.112* (130)

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


62-PML Series

Pow

er L

ine

Filt

ers




Circuit 1

Circuit 2

Circuit Diagram

Features Compact design requires minimal real estate

space Suitable for products that must conform

to FCC and FTZ regulations Excellent attenuation for high voltage impulse Metal case provides effective shielding Excellent filtering characteristics for both normal

mode and common mode Structure provides effective shielding for noise

generated externally and internally Operating temperature: -25°C to +70°C Low leakage current

Applications Digital equipment Personal computers and peripherals Measuring instruments Medical equipment Factory automation equipment

Note: All types are designed to meet the requirement of UL 1283, CSA 22.2. VDE 0565-3Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. at rated currentDischarge time: 0.4 sec. max.

12-PML & 12-PMF Series

Pow

er L

ine

Filt

ers

Power Line FiltersSingle Stage Wire Leadsfor Medical Purpose Applications

Specifications

Model

12-PML-001-2-A

12-PML-002-2-A

12-PML-006-2-A

12-PML-010-2-A

12-PMF-001-2-B

12-PMF-002-2-B

12-PMF-006-2-B

12-PML-001-2-C


120/250VAC

RatedCurrent

1A

2A

6A

10A

1A

2A

6A

1A


5uA

CircuitDiagram

1

2

1


30°C

Figure

A

B

C


Power Line FiltersSingle Stage Wire Leadsfor Medical Purpose Applications

12-PML & 12-PMF Series

Pow

er L

ine

Filt

ers

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-PML-001;-002;-006;-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PML-001-2-A

12-PML-002-2-A

12-PML-006-2-A

12-PML-010-2-A

12-PMF-001;-002;-006;-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-001-2-B 12-PMF-002-2-B

12-PMF-006-2-B

11-PML-001-2-C

12-PML-001;-002;-006;-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PML-001-2-A

12-PML-002-2-A 12-PML-006-2-A

12-PML-010-2-A

12-PMF-001;-002;-006;-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

11-PML-001-2-C

12-PMF-001-2-B 12-PMF-002-2-B

12-PMF-006-2-B

1.2(30)

.79 (20)

.14 (3.8) (2X)

1.7 (44)

2.2 (56)2.4 (61)

Figure B

1.2(30)

1.7 (44)

.13 (3.5) X .17 (4.5) SLOT (2 PLACES)

1.5(39)

1.9(49)

.31 (8)

.78 (20)

Figure A

.94(24)

1.25 (32)

.13 (3.5) X .17 (4.5) SLOT (2 PLACES)

.78 (20)1.6 (42)1.9 (48)

Figure C


1

2

3

E

4

RCX CX

L1

CY

CY

Circuit Diagram


Features Space saving, compact designs Suitable for products that must conform

to FCC and FTZ regulations Excellent filtering characteristics for both normal mode

and common mode Structure provides effective shielding for noise

generated externally and internally Metal case provides effective shielding Rugged construction Operating temperature: -25°C to +85°C


Applications Digital equipment Office automation equipment, such as copy

and fax machines Computers and peripherals Instrumentation and controls

Note: Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max. at rated currentDischarge time: 0.4 sec. max.Weight: 5.3 ounces (150 grams)

62-LMF & LMB Series

Pow

er L

ine

Filt

ers


Specifications

62-LMB-030-5-11

62-LMF-030-5-11

62-LMB-050-5-11

62-LMF-050-5-11

62-LMB-080-5-11

62-LMF-080-5-11

62-LMB-100-5-11

62-LMF-100-5-11


250VAC

3A

5A

8A

0.50mA 3300pF

14mH

7.0mH

4.2mH

2.2mH

45°C

0.1uF

0.1uF & .22uF

.22uF

.33uF10A

*62-LMF - designates Fast-on terminals62-LMB - designates Bolt-in terminals62-LML - wire lead in/outputs also available




50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-LM-030-5-11 62-LM-050-5-11

62-LM-080-5-11

62-LM-100-5-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

9062-LM-030-5-11

62-LM-050-5-11

62-LM-080-5-11

62-LM-100-5-11

62-LMF & LMB 62-LMF & LMB

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


2 - ø .188(4.8)

5-M4

2.79(70.9)

2.39(60.7± 0.5)

1.22(31.0)

1.10(28.0)

.708(18.0)

.255(6.5)

.66(16.8)

1.97(50.0)

.61(15.5)

1.97(50.0)

.66(16.8)

62-LMF

.61(15.5)

2.79(70.9)

2.39(60.7± 0.5)

1.22(31.0)

1.10(28.0)

.708(18.0)

.255(6.5)

2 - ø4.8

.61(15.5)

1.97(50.0)

.61(15.5)

1.97(50.0)

Fast-on Tabs #250.031 (0.8) t


62-LMB

Pow

er L

ine

Filt

ers


62-LMF & LMB Series

Features Space-saving, compact designs Suitable for products that must conform

to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Excellent filtering characteristics for both normal mode

and common mode Epoxy molded for internal component reliability Structure provides effective shielding for noise



Applications Digital equipment Computers and peripherals Measuring instruments Medical equipment Equipment requiring very high impulse attenuation Factory automation equipment Industrial equipment such as UPS, inverters

and converters Telecommunications equipment Office automation equipment, such as copy

and fax machines

1

2

3

E

4

RCX CX

L1

CY

CY

Circuit Diagram


* PMF - designates Fast-on terminalsPMB - designates Bolt-in terminals

** The temperature rise of 20 amp units can be decreased to 30°Cby mounting on 200 X 200 x 1.0(mm) steel chassis

62-PMF & PMB Series

Note: Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max.Discharge time: 0.4 sec. max.Weight: 8.82 ounces ( 250 grams)

Pow

er L

ine

Filt

ers


Specifications

62-PMB-050-5-11

62-PMF-050-5-11

62-PMB-080-5-11

62-PMF-080-5-11

62-PMB-100-5-12

62-PMF-100-5-12

62-PMB-150-5-13

62-PMF-150-5-13

62-PMB-200-5-13

62-PMF-200-5-13


250VAC

5A

8A

10A 0.50mA

14mH

7.0mH

4.2mH

2.2mH

30°C

0.1uF

.1uF & .22uF

.22uF

.33uF

1.8mH

3300pF

15A

20A 45°C**

35°C




3.291 (83.7)

2.937 (74.7) Fast-on tab#250

.610(15.5)

2.497 (63.5) .610(15.5)

2 — .197 (5)

B

C

1.258 (32)

.315 (8)

1.998(50.8)

A

3.291 (83.7)

2.937 (74.7) 5 — .157 (M4)

2 — .197 (5)

.649(16.5)

.649(16.5) 2.497 (63.5) A

B

C

.315 (8)

1.258 (32)

1.998(50.8)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

62-PMB-200-5-13

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-PMB-100-5-12

62-PMB-080-5-11

62-PMB-050-5-11

62-PMB-150-5-13

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-PMF-150-5-13

62-PMF-050-5-11

62-PMF-080-5-11

62-PMF-100-5-12

62-PMB-200-5-13

MODEL A B C

62-PMF/PMB-100-200

62-PMF/PMB-050-080

1.490 .944 .433(38) (24) (11)

1.258 .786 0(32) (20) (0)

62-PMB-050-6

62-PMF

62-PMB

62-PMB-050-6

50ΩLevelMeter

R1 R2S1 S2Filter

Oscillator50Ω 50

Ω

50Ω

T1 T2

50Ω

50Ω

120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


50ΩLevelMeter

R1 R2S1 S2Filter

Oscillator50Ω

T1 T2

50Ω

50Ω

Pow

er L

ine

Filt

ers



62-PMF & PMB Series


Circuit 1

Circuit 3

Circuit 5

Circuit 2

Circuit 4

Circuit 6

Circuit Diagram



to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Excellent filtering characteristics for both normal mode





and fax machines

12-PMF Series

Note: Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max.Discharge time: 0.4 sec. max.

Pow

er L

ine

Filt

ers

Model

12-PMF-001-5-A

12-PMF-002-5-B

12-PMF-003-5-A

12-PMF-003-5-B

12-PMF-006-5-A

12-PMF-006-5-C

12-PMF-006-5-D

12-PMF-010-5-A

12-PMF-010-5-C

12-PMF-015-5-C

12-PMF-015-5-E

12-PMF-020-5-C

12-PMF-020-5-D

12-PMF-020-5-E


120/250VAC

RatedCurrent

1A

2A

3A

6A

10A

15A

20A


0.5mA

CircuitDiagram

1

2

4

2

4

1

6

2

3

5


30°C

Figure

A

B

A

B

A

C

D

A

C

E

C

D

E

Specifications

2.4(62)

.86 (22)

1.8(46)

1.25 (32)

2.4 (62)

2.1(54)

.14 (3.8)



Pow

er L

ine

Filt

ers

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-PMF-001;-002;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-001-5-A

12-PMF-003-5-B

12-PMF-002-5-B

12-PMF-003-5-A

12-PMF-006-5-A

12-PMF-006-5-C

12-PMF-006-5-D

12-PMF-001;-002;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-001-5-A

12-PMF-003-5-B

12-PMF-002-5-B

12-PMF-003-5-A

12-PMF-006-5-A

12-PMF-006-5-C

12-PMF-006-5-D

12-PMF-001;-002;-003;-006

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-001-5-A

12-PMF-002-5-B

12-PMF-003-5-A

12-PMF-003-5-B

12-PMF-006-5-A

12-PMF-006-5-C

12-PMF-006-5-D

12-PMF-010;-015;-020

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-010-5-A

12-PMF-010-5-C

12-PMF-015-5-C

12-PMF-015-5-E

12-PMF-020-5-C

12-PMF-020-5-E12-PMF-020-5-D

Figure A

1.2(30)

1.7 (44)

.34 (8.8)

2.2 (56)

3.2 (81)

.78 (20)

2

Figure B

2.0(52)

2.0 (52)

.17 (8.8)

2.4 (63)

3.2 (82)

1.4 (37)

2

Figure C

1.9(50)

1.7 (44)

2.9 (74)

.41 (10.5)

1.1 (28)

2.3(60)

2.8(10.5)

2 - .18 (4.8)

Figure D

2.9(74)

3.1 (80)

3.3(85)

2.5(64)

2.0 (51)

1.4 (36)

1.7 (4.5) (2X)

Figure E

12-PMF Series


Circuit Diagram

Power Line FiltersSingle Stage - Higher Current


to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective shielding Excellent filtering characteristics for both normal mode


generated externally and internally Safety agency approvals pending Designed to be in accordance with VDE 0565 Part 3 Operating temperature: -25°C to +85°C

(including temperature rise)



and fax machines

62-PMB Series

Note: Test voltage: 1500VAC one minute, line to earthInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max.Discharge time: 0.4 sec. max.Weight: 8.82 ounces (250 grams)

1

2

CX R E

4

3

CX

CY

CY

L1

L1

Pow

er L

ine

Filt

ers


Specifications

62-PMB-300-5-14

62-PMB-400-5-14


250VAC

30A

40A

0.50mA

1.6mH

0.8mH

45°C3300pF .47uF

3.03 (77±0.5)

3.70 (94)

3.85 (98)

5.591 (142.00)

3.15 (80)

3.74 (95±.08)

4.13 (105)

2.049 (52.0)

1.022 (26.0)

0.511 (13.0)

62-PMB-300-5-14 and 62-PMB-400-5-14

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-PMB-400-5-14

62-PMB-300-5-14

Common ModeNormal Mode

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-PMB-400-5-14

62-PMB-300-5-14

1

2

3

4

OSCILLATOR50 ohm 50 ohm 50 ohm

FILTER

50 ohmLEVELMETER

1

2

3

4

50 ohm

50 ohmLEVELMETEROSCILLATOR

50 ohm

FILTER



Pow

er L

ine

Filt

ers


62-PMB Series


Circuit Diagram



to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective shielding Excellent filtering characteristics for both normal mode


generated externally and internally Designed to be in accordance with VDE 0565 Part 3 Operating temperature: -40°C to +85°C



and fax machines

12-PMB Series

Note: Test voltage: 1500VAC one minute, line to earthInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max.Discharge time: 0.4 sec. max.Weight: 8.82 ounces (250 grams)

1

2

CX R E

4

3

CX

CY

CY

L1

L1

Pow

er L

ine

Filt

ers

Specifications

Model

12-PMB-025-5-A

12-PMB-030-5-A

12-PMB-035-5-B

12-PMB-050-5-B

12-PMB-100-8-C

12-PMB-120-8-C


120/250VAC

RatedCurrent

25A

30A

35A

50A

100A

120A


0.5mA

1.0mA

CircuitDiagram

1

Figure

A

B

C


30°C



Pow

er L

ine

Filt

ers

12-PMB Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-PMB-025;-030;-035

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMB-025-5-A

12-PMB-030-5-A

12-PMB-035-5-B

12-PMB-050;-100;-120

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMB-050-5-B

12-PMB-100-8-C

12-PMB-120-8-C

12-PMB-025;-030;-035

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMB-025-5-A

12-PMB-030-5-A

12-PMB-035-5-B

12-PMB-050;-100;-120

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMB-050-5-B

12-PMB-100-8-C

12-PMB-120-8-C

2.0(52)

2.0(24) ±.03

0.2 (6) ±.030.8 (22)

±.031.4 (37) MAX

1M4 STUD(4X)

.17 (4.5) ±.007(2X)

3.9 (101) MAX

2.5 (64) MAX

2.9 (75) ±.01

3.3(84)

1.5 (38.5)

5.3 (135)

3.9 (98.5)2.0 (51)

0.2 (6.3)0.5 (4.5)

3.7(95)

4.1(105)

M4 THREAD (10X)

5.1(130)

1.9 (50) 3.1 (80)

4.7 (120)7.0 (180)

4.3(110)

4.5(115)

0.16 (4.2) X 0.25 (6.4) (2X)M8 THREAD (4X)

Figure A Figure B Figure C



Circuit Diagram

Power Line FiltersDC - Higher Current

Features Space-saving, compact designs Suitable for products that must conform to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective shielding Excellent filtering characteristics for both normal mode


generated externally and internally Designed to be in accordance with VDE 0565 Part 3 Operating temperature: -40°C to +85°C

Applications Digital equipment Computers and peripherals Measuring instruments Equipment requiring very high impulse attenuation Factory automation equipment Industrial equipment such as UPS, inverters and converters Telecommunications equipment

12-PMF & 12 PMB DC Series

Note: Test voltage: 1500VAC one minute, line to earthInsulation resistance: 300 Mohm min. at 500VDCVoltage drop: 1V max.

Circuit 1

Circuit 2

Circuit 3

Pow

er L

ine

Filt

ers

SpecificationsRated Voltage(@ 50/60Hz)

48/250VDC

CircuitDiagram

1

2

3

2

Figure

A

B

C

D

E

F

G


30°C

Discharge time: 0.4 sec. max.Weight: 8.82 ounces (250 grams)

Model

12-PMF-006-DC-C

12-PMF-010-DC-C

12-PMF-015-DC-C

12-PMF-020-DC-C

12-PMF-025-DC-D

12-PMB-025-DC-F

12-PMB-030-DC-F

12-PMB-035-DC-F

12-PMB-040-DC-F

12-PMB-040-DC-B

12-PMB-050-DC-B

12-PMB-060-DC-B

12-PMB-080-DC-G

12-PMB-080-DC-C

12-PMB-100-DC-C

12-PMB-120-DC-C

12-PMB-140-DC-C

12-PMB-180-DC-E

12-PMB-200-DC-E

12-PMB-260-DC-E

RatedCurrent

6A

10A

15A

20A

25A

30A

35A

40A

50A

60A

80A

100A

120A

140A

180A

200A

260A


Power Line FiltersDC - Higher Current

Pow

er L

ine

Filt

ers

12-PMF & 12-PMB DC Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-PMF-006;-010;-015;-020;-025

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-006-DC-C

12-PMF-010-DC-C

12-PMF-015-DC-C

12-PMF-020-DC-C

12-PMF-025-DC-D

12-PMB-025; thru -260

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMB-025-DC-F12-PMB-030-DC-F12-PMB-035-DC-F12-PMB-040-DC-F

12-PMB-040-DC-B12-PMB-050-DC-B12-PMB-060-DC-B

12-PMB-080-DC-G12-PMB-080-DC-C

12-PMB-100-DC-C12-PMB-120-DC-C12-PMB-140-DC-C

12-PMB-180-DC-E12-PMB-200-DC-E12-PMB-260-DC-E

12-PMF-006;-010;-015;-020;-025

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMF-006-DC-C

12-PMF-010-DC-C

12-PMF-015-DC-C

12-PMF-020-DC-C

12-PMF-025-DC-D

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

12-PMB-025; thru -260

12-PMB-025-DC-F12-PMB-030-DC-F12-PMB-035-DC-F12-PMB-040-DC-F

12-PMB-040-DC-B12-PMB-050-DC-B12-PMB-060-DC-B

12-PMB-080-DC-G12-PMB-080-DC-C

12-PMB-100-DC-C12-PMB-120-DC-C12-PMB-140-DC-C

12-PMB-180-DC-E12-PMB-200-DC-E12-PMB-260-DC-E

1.9 (50)±.003

Figure C Figure D

Figure E Figure F Figure G

Figure A

Figure B



Power Line FiltersDual Stage

Features Suitable for products that must conform

to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Two stages for excellent filtering characteristics Epoxy molded for reliability Structure provides effective shielding for noise

generated both externally and internally Operating temperature: -25°C to +85°C


Applications Digital equipment Personal computers and peripherals Measuring instruments and medical equipment Telecommunications equipment Equipment requiring very high noise attenuation

Note: All types are designed to meet the requirement of UL 1283, CSA 22.2. VDE 0565-3Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCLeakage current: 0.7 mA max.Voltage drop: 1V max.Discharge time: 0.4 sec. max.Weight: 6.0 ounces (170 grams)

62-MMF Series

1 3

E

42

CX

L1CX

RCX

CY

CY CY

CY

L1

62-MMF-XXX-7-11

Circuit Diagram

Pow

er L

ine

Filt

ers

SpecificationsModel

Rated Voltage Rated Leakage Current Capacitance Inductance Temperature(@ 50/60Hz) Current (Max.) CY1 CY2 CX (L1) (2X) Rise (Max.)

62-MMF-030-7-11 250VAC 3A .7mA 3300pF 1000pF 0.1uF 3.7mH 30°C

62-MMF-050-7-11 250VAC 5A .7mA 3300pF 1000pF 0.1uF 2.9mH 30°C


120

100

80

60

40

20

020 30 40 50 60 70 80 90


Cur

rent

(%)


62-MMF Series



Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-MMF-030-7-11

62-MMF-050-7-11

62-MMF

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Inse

rtio

n Lo

ss (d

B)

80

70

60

50

40

30

20

10

0

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

90

62-MMF-050-7-11

62-MMF-030-7-11

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

3.291 (83.7)

2.937 (74.7) Fast-on tab#250

2 – .197 (5)

.610(15.5)2.497 (63.5)

.610(15.5)

.786 (20)

.315 (8)

1.258 (32).315

(8) 1.998(50.8)

1.258 (32)

62-MMF

Pow

er L

ine

Filt

ers





to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Two stages for excellent filtering characteristics Structure provides effective shielding for noise

generated both externally and internally Operating temperature: -40°C to +85°C High performance Low leakage current

Applications Digital equipment Switching power supplies Personal computers and peripherals Measuring instruments and medical equipment Telecommunications equipment Equipment requiring very high noise attenuation

Note: All types are designed to meet the requirement of UL 1283, CSA 22.2. VDE 0565-3Test voltage: 1500VAC one minute, line to groundInsulation resistance: 300 Mohm min. at 500VDCLeakage current: 0.7 mA max.Voltage drop: 1V max.Discharge time: 0.4 sec. max.

12-MMF & 12-MMB Series

Circuit 1

Circuit 2

Circuit 3

Circuit Diagram

Pow

er L

ine

Filt

ers


120/250VAC

LeakageCurrent (Max.)

0.5mA

Figure

A

B

C

B

D

B

D

E

D

F

G


30°C

RatedCurrent

2A

3A

6A

8A

10A

12A

15A

20A

30A

50A

Model

12-MMF-002-5-F

12-MMF-003-5-F

12-MMF-003-5-A

12-MMF-006-5-F

12-MMF-006-5-G

12-MMF-008-5-B

12-MMF-010-5-F

12-MMF-010-5-G

12-MMF-010-5-B

12-MMF-012-5-B

12-MMB-015-5-E

12-MMB-020-5-F

12-MMB-030-5-D

12-MMB-050-5-C

CircuitDiagram

1

3

2




Pow

er L

ine

Filt

ers

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-MMF-002;-003;-006;-008

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.01 0.05 0.15 1 2 5 10 20 50

12-MMF-002-5-F

0.45

12-MMF-003-5-F

12-MMF-003-5-A

12-MMF-006-5-F12-MMF-006-5-G

12-MMF-008-5-B

12-MMF-010;-012;-015;-020;-030;-050

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.01 0.05 0.15 1 2 5 10 20 500.45

12-MMB-015-5-E

12-MMB-020-5-F

12-MMB-030-5-D

12-MMB-050-5-C

12-MMF-010-5-F12-MMF-010-5-G12-MMF-010-5-B12-MMF-012-5-B

12-MMF-002;-003;-006;-008

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.01 0.05 0.15 1 2 5 10 20 500.45

12-MMF-003-5-A

12-MMF-006-5-G

12-MMF-003-5-F

12-MMF-002-5-F12-MMF-006-5-F

12-MMF-008-5-B

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

0

12-MMF-010;-012;015;-020;-030;-050

0.01 0.05 0.15 1 2 5 10 20 500.45

12-MMB-015-5-E12-MMB-020-5-F

12-MMB-030-5-D

12-MMB-050-5-C

12-MMF-010-5-F12-MMF-010-5-G12-MMF-010-5-B12-MMF-012-5-B

2.00(51)

2.00 ± .02 (75 ± .5)3.35 (85) MAX

Figure A Figure B

.87 (22)2.44 (62)

2.44(62)

1.81(46)

1.26 (32)

2.12(54)

Ø .15 (3.8) (2X)Figure C

2.40 ± .007(60 ± .2)

1.50 (38) 7.24 (184)7.95 (202)

M4 STUD (7X) .21 (5.4) X .37 (9.4) HOLE (4X)

6.30 (160)

3.38(86)

1.65(42)

.71 (18)

2.30 (58)

Figure E

2.01 (51)

3.30(84)

3.74(95)

4.13(105)

3.88 (98.5)5.31 (135)

.117 (4.5) X .25 (6.3) SLOT (4X)M4 THREAD (5X)

1.51 (38.5)

Figure F

3.15 (80)

3.93(100)

M6 THREAD (4X)

4.52(115)

5.12(130)

4.72 (120)7.09 (180)

M4 THREAD

1.97 (50)

Figure G


2.42 (87)4.01 (102)

2.90 (73)

2.24(57)

1.77 (45)

Ø .25 (6.4) (2X)

Figure D


30°C

Figure

A

B

C

B

D

E

F

RatedCurrent

3A

6A

10A

12A

15A

20A

30A

40A

50A

Model

12-MMF-003-11-F

12-MMF-006-11-F

12-MMF-010-11-F

12-MMB-012-11-A

12-MMB-015-11-G

12-MMB-020-11-D

12-MMB-030-11-D

12-MMB-040-11-B

12-MMB-040-11-E

12-MMB-050-11-H




to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Two stages for excellent filtering characteristics Structure provides effective shielding for noise

generated both externally and internally Operating temperature: -40°C to +85°C High performance




Circuit 1

Circuit 2

Circuit Diagram

Pow

er L

ine

Filt

ers


120/250VAC


1.5mA

CircuitDiagram

1

2

1

2

1

2.28(58)

8.66 (220)9.57 (243)10.27 (261)

5.90(150)

3.54(90)

1.77 (45)3.54(90)

M6 THREAD (5X) .25 (6.4) x .37(9.4) SLOT (4X)

Figure D

2.91 (74)3.66 (93)4.01 (102)

2.24(57)

.95(24.1)

.177 (4.5) X .25 (6.5) SLOT (2X)

.35 (9)

.90 (23)1.77(45)

Figure E

1.97(50) 3.14 (80)

4.72 (120)

3.93(100)

.165 (4.2) X .25 (6.4) (4X)

M8 THREAD (4X)

7.08 (180)

4.53(115)

5.12(130)

Figure F





Pow

er L

ine

Filt

ers

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-MMF-003;-006;-010;-012;-015

Inse

rtio

n Lo

ss (d

B)

120

Frequency (MHz)

105

90

75

60

45

30

15

00.1 0.2 0.5 1 2 5 10 20 50

12-MMF-003-11-F

12-MMF-006-11-F

12-MMF-010-11-F

12-MMF-012-11-A

12-MMF-015-11-G

12-MMF-020;-030;-040;-050

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

120

105

90

75

60

45

30

15

0

12-MMF-020-11-D

12-MMF-030-11-D

12-MMF-040-11-B

12-MMF-040-11-E

12-MMF-050-11-H

12-MMF-003;-006;-010;-012;-015

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

120

105

90

75

60

45

30

15

0

12-MMF-003-11-F

12-MMF-006-11-F

12-MMF-010-11-F

12-MMF-012-11-A

12-MMF-015-11-G

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

12-MMF-020;-030;-040;-050120

105

90

75

60

45

30

15

012-MMF-020-11-D

12-MMF-030-11-D

12-MMF-040-11-B

12-MMF-040-11-E

12-MMF-050-11-H

Figure A

1.53 MAX (39)

3.33MAX(84.5)

1.73± .04

(44 ± 1)

.75 ± .04 (19 ± 1)

6.20 MAX (157)3.90 MAX (99)

2.01 ± .02(51 ± 0.5)

3.74± .02

(95 ± 0.5)

4.13MAX(105)

Figure B

2.24(57)

2.90 (73)1.80 (45) 3.42 (87)

4.30 (109)

M4 THREAD (4X)Ø .18 ± .007 (2X)(4.5 ± 0.2)

Figure C

Figure

A

B

C

D


0.5mA

5uA

0.5mA

RatedCurrent

1A

3A

6A

10A

15A

20A

30A

Model

12-MMF-001-5-F

12-MMF-003-5-G

12-MMF-003-2-G

12-MMF-006-5-G

12-MMB-010-5-D

12-MMB-015-5-E

12-MMB-020-5-E

12-MMB-030-5-E




to FCC regulations Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Two stages for excellent filtering characteristics Epoxy molded for reliability Structure provides effective shielding for noise

generated both externally and internally Operating temperature: -25°C to +85°C




Circuit 1

Circuit 2

Circuit 3

Circuit Diagram

Pow

er L

ine

Filt

ers


120/250VAC


30°C

CircuitDiagram

3

1

2

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

12-MMF-001;-003;-006

Inse

rtio

n Lo

ss (d

B)

120

Frequency (MHz)

105

90

75

60

45

30

15

00.1 0.2 0.5 1 2 5 10 20 50

12-MMF-001-5-F

12-MMF-003-5-G

12-MMF-003-2-G

12-MMF-006-5-G

12-MMB-010;-015;-020;-030

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

120

105

90

75

60

45

30

15

0

12-MMB-010-5-D 12-MMB-015-5-E

12-MMB-020-5-E

12-MMB-030-5-E

12-MMF-001;-003;-006

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

120

105

90

75

60

45

30

15

0

12-MMF-001-5-F

12-MMF-003-5-G

12-MMF-003-2-G

12-MMF-006-5-G

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

12-MMB-010;-015;-020;-030120

105

90

75

60

45

30

15

0

12-MMB-010-5-D12-MMB-015-5-E12-MMB-020-5-E

12-MMB-030-5-E





Pow

er L

ine

Filt

ers

Figure B

2.95 (75)3.70 (94)

2.52 (64)

2.01(51)

1.06 (27)

Figure A

1.52 (39)MAX

1.73 ± .03(44 ± 1)

4.13 MAX.(64)

2.01 ± .02(51 ± .05)

3.15 (99) MAX5.31 (135) MAX

0.75 ± .03 (19 ± 1)

3.33(84.5)MAX

3.74 ± .02(95 ± 0.5)

M4 THREAD (5X)Figure C

2.36 ± .007(60 ± .2)

7.09 (180)7.24 (184)7.95 (202)

3.38(86)

1.50 (38).71 (18)

M4 STUD (7X)

1.65(42)

.25 (6.4) .37 (9.4) HOLE (4X)

2.28 (58)

Figure D

Power Line FiltersThree PhaseLow Current/High Performance

Features Excellent attenuation for high voltage impulse Effective for both balanced and unbalanced

three-phase loads Metal case provides effective EMI shielding Epoxy molded for internal component reliability Compact and economical Excellent filtering characteristics for both normal

and common mode Various current ratings available: 3, 5, 8 and 16 Amps Safety agency approvals pending Operating temperature: -25°C to +85°C


Applications Digital equipment Industrial equipment (UPS, inverters

and converters) Automation equipment Computerized washing machines

Circuit Diagram

CX

CYCY

CX CX CX CX CX

L

L

L

L

CX

CX

CX

CY

CY

CY

L

L

L

L

CY

CX CX

CX

CY

CY

CY

L

L

L

L

L

L

62-PMB-050-6-12 (5 Amp Delta)

63-PMF-030-8-14 and 63-PMF-080-8-14 (3 and 8 Amp Wye)

63-PMF-160-9-21 (16 Amp Wye)

Note: Test Voltage 1500VAC one minute, line to ground.Insulation Resistance: 300 MΩ min. at 500VDC.Voltage Drop: 1V max. at rated current.Weight: 8.82 ounces (250 grams) for 63-PMF-030-8-14 and 63-PMF-080-8-14

19.4 ounces (550 grams) for 62-PMB-050-6-1251.5 ounces (1450 grams) for 63-PMF-160-9-21

Pow

er L

ine

Filt

ers


Specifications

62-PMB-050-6-12

63-PMF-030-8-14

63-PMF-080-8-14

63-PMF-160-9-21


250VAC

420VAC

5A

3A

8A

16A

0.6mA

1.0mA

3.0mA

45°C

30°C

40°C

45°C

115mH

1.0mH (4X)

0.74mH (4X)

1.2mH (4X)

0.22uF

470uF (3X)

1.0uF (6X)

2200pF

4700pF (4X)

0.015uF (2X)

62-PMB/63-PMF Series

Power Line FiltersThree PhaseLow Current/High Performance


BL

BL BK

BK

4.444 (113)4.050 (103)

3.585 (91.2).547(13.9)

.547(13.9)

.983(25)

2 - .197(ø5) Hole

Fast-ontab #250

1.809(46)

.208(5.3)

2.045(52)

.629(16)

.708(18)

1.376 (35)

5 — .157(M4)

2.753 (70)

.865 (22)

.865 (22)

3.460(88)

3.539(90)

.039 (1)

.944 (24)* General tolerance ±.020 (0.5)

Common Mode

63-PMF-030-8-14 and 63-PMF-080-8-14 (3 and 8 Amp)

62-PMB-050-6-12 (5 Amp)

63-PMF-160-9-21 (16 Amp)

Normal Mode


63-PMF-030-8-14

63-PMF-160-9-21

63-PMF-080-8-14

63-PMB-050-8-12

63-PMF-030-8-14

63-PMF-160-9-21

63-PMF-080-8-14

63-PMB-050-8-12

62-PMB-050-6-12 (5 Amp)

63-PMF (3, 8 and 16 Amp)

62-PMB-050-6-12 (5 Amp)

63-PMF (3, 8 and 16 Amp)

Fast ontab #250

.350 (8.9)

.350 (8.9)

.350 (8.9)

4.404(112)

5.112 (130.0)5.702 (145 ± 0.5)6.292 (160)

4 - .216(ø5.5) Hole

.362(9.2)

4.286(109)

3.146(80.0±0.5)

* General tolerance ±..059 (1.5)

Fast ontab #250(Groundtab)

.708(18)

1.494 (38)2.359 (60)

Pow

er L

ine

Filt

ers


62-PMB/63-PMF Series

Figure

A

B

A

B

C

RatedCurrent

5A

10A

15A

20A

25A

30A

Model

13-PWF-005-12-H

13-PWL-005-12-C

13-PWF-010-12-H

13-PWL-010-12-C

13-PWB-010-12-D

13-PWB-015-12-D

13-PWB-020-12-D

13-PWB-025-12-D

13-PWB-030-12-D


Power Line FiltersThree Phase


three-phase loads Metal case provides effective EMI shielding Epoxy molded for internal component reliability Suitable for both Wye and Delta connection Excellent filtering characteristics for both normal

and common mode Operating temperature: -40°C to +85°C Designed for 3-phase 4-line power supply systems


and converters) Automation equipment Computerized washing machines

Circuit DiagramCircuit 1

A

B

C

NG

A'

B'

C'

N'

A

B

C

NG

A'

B'

C'

N'

Circuit 2

Note: Test Voltage 1500VAC one minute, line to ground.Insulation Resistance: 300 MΩ min. at 500VDC.Voltage Drop: 1V max. at rated current.

Pow

er L

ine

Filt

ers


440/250VAC


1.5mA


30°C

CircuitDiagram

1

2

13-PWF/PWL/PWB Series




Pow

er L

ine

Filt

ers

13-PWF/PWL/PWB Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

13-PWF-005;-010;-PWL-005;-010;-PWB-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PWF-005-12-H13-PWL-005-12-C

13-PWF-010-12-H13-PWL-010-12-C

13-PWB-010-12-D

13-PWB-015;-020;-025:-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PWB-015-12-D13-PWB-020-12-D13-PWB-025-12-D

13-PWB-030-12-D

13-PWF-005;-010;-PWL-005;-010;-PWB-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PWF-005-12-H13-PWL-005-12-C

13-PWF-010-12-H13-PWL-010-12-C

13-PWB-010-12-D

13-PWB-015;-020;-025:-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PWB-015-12-D13-PWB-020-12-D13-PWB-025-12-D

13-PWB-030-12-D

5.3 (135)

3.9 (98.5)

2.0 (51)

Figure CFigure A

Figure B

Figure

A

B

A

B

C

RatedCurrent

5A

10A

15A

20A

25A

30A

Model

13-PDF-005-11-J

13-PDL-005-11-D

13-PDF-010-11-J

13-PDL-010-11-D

13-PDB-010-11-D

13-PDB-015-11-D

13-PDB-020-11-D

13-PDB-025-11-D

13-PDB-030-11-D




three-phase loads Metal case provides effective EMI shielding Epoxy molded for internal component reliability Compact and economical Excellent filtering characteristics for both normal

and common mode Operating temperature: -40°C to +85°C Designed for 3-phase, 3-Delta connection system


and converters) Automation equipment Switching power supplies

Circuit Diagram

A

B

C

G

A'

B'

C'

A

B

C

G

A'

B'

C'

Circuit 1

Circuit 2


Pow

er L

ine

Filt

ers


440/250VAC


1.5mA


30°C

CircuitDiagram

1

2

13-PDF/PDL/PDB Series

Ø .177 (4.5) (2X)

3.35 (85)

2.95 (75)

2.52 (64)1.06(27)

2.00(51)

M4THREAD(10X)

5.31 (135)

3.88 (98.5)2.00 (51)

1.51(38.5)

3.31(84)

3.74(95)

4.13(105)

.117 (4.5)

.25 (6.3)Ø .177 (4.5) (2X)

3.35(85)

3.15 (80)

2.00(51)

1.42(36)

2.91(74)

2.52(64)




Pow

er L

ine

Filt

ers

13-PDF/PDL/PDB Series

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

13-PDF-005;-010; PDL-005;-010 PDB-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PDF-005-11-J13-PDL-005-11-D

13-PDF-010-11-J13-PDL-010-11-D

13-PDB-010-11-D

13-PDB-015;-020;-025:-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PDB-015-11-D13-PDB-020-11-D13-PDB-025-11-D

13-PDB-030-11-D

13-PDF-005;-010; PDL-005;-010 PDB-010

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PDF-005-11-J13-PDL-005-11-D

13-PDF-010-11-J13-PDL-010-11-D

13-PDB-010-11-D

13-PDB-015;-020;-025:-030

Inse

rtio

n Lo

ss (d

B)

80

Frequency (MHz)

70

60

50

40

30

20

10

00.1 0.2 0.5 1 2 5 10 20 50

13-PDB-015-11-D13-PDB-020-11-D13-PDB-025-11-D

13-PDB-030-11-D

Figure C

Figure B

Figure A

RatedCurrent

5A

10A

20A

35A

50A

80A

100A

150A

Model

13-PWB-005-12-A

13-PWB-010-12-B

13-PWB-020-12-B

13-PWB-035-12-C

13-PWB-050-13-C

13-PWB-080-14-D

13-PWB-100-14-D

13-PWB-150-14-E

A

B

C

NG

A'

B'

C'

N'

A

B

C

NG

A'

B'

C'

N'

Circuit 1

Circuit 2

Power Line FiltersThree PhaseHigh Performance

Features Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Epoxy molded for internal component reliability Excellent filtering characteristics for both normal

and common mode Various current ratings available: from 5 to 150 Amps Operating temperature: -40°C to +85°C Designed for 3-phase, 4-line power systems

Applications Power supplies for data systems Industrial equipment (UPS, inverters

and converters) Automation equipment Telecommunications systems and equipment

Circuit Diagram


Pow

er L

ine

Filt

ers



440/250VAC


4.5mA

9.0mA

20mA


30°C

CircuitDiagram

1

2

13-PWB Series

AB

C

E

L

M

G

D

H P

F

K

NJ

I



Pow

er L

ine

Filt

ers


13-PWB Series

DimensionsModel

13-PWB-005-12-A

13-PWB-010-12-B

13-PWB-020-12-B

13-PWB-035-12-C

13-PWB-050-13-C

13-PWB-080-14-D

13-PWB-100-14-D

13-PWB-150-14-E

A

7.2 (184)

9.6(243)

13.9(354)

B

6.3 (160)

8.7(220)

12.6(320)

C

7.9 (202)

10.3(261)

15.1(384)

D

2.4(60)

3.1(81)

3.9(99)

E

1.7(44)

3.8(96)

6.1(155)

7.5 (190)

F

3.5 (86)

3.9(100)

4.9(125)

7.3(185)

8.7 (220)

G

.70 (18)

.98(25)

1.2(30)

1.4 (35)

H

2.3 (58)

3.5(90)

3.9 (100)

I

M4

M6

M8

J

1.5 (38)

1.8(45)

2.3(58)

2.4(62)

M

–

2.9(74)

3.4(86)

K

–

M4

N

–

1.9(49)

2.2(56)

2.4 (61)

P

M4

M6

M8

L

.25 x .37 (6.4 x 9.4)

.25 x .37 (6.4 x 9.5)

.25 x .38 (6.4 x 9.6)

.25 x .38 (6.4 x 9.7)

.25 x .38 (6.4 x 9.8)

.25 x .39 (6.4 x 9.9)

.25 x .36 (6.4 x 9.10)

.25 x .36 (6.4 x 9.11)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

13-PWB-005;-010;-020;-035

Inse

rtio

n Lo

ss (d

B)

120

Frequency (MHz)

105

90

75

60

45

30

15

00.1 0.2 0.5 1 2 5 10 20 50

13-PWB-005-12-A

13-PWB-020-12-A

13-PWB-035-12-A

13-PWB-010-12-A

13-PWB-050;-080;-100;-150

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

120

105

90

75

60

45

30

15

0

13-PWB-050-13-C

13-PWB-080-14-D

13-PWB-100-14-D

13-PWB-150-14-E

13-PWB-005;-010;-020;-035

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

120

105

90

75

60

45

30

15

0

13-PWB-005-12-A

13-PWB-020-12-A

13-PWB-035-12-A

13-PWB-010-12-A

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

0.1 0.2 0.5 1 2 5 10 20 50

13-PWB-050;-080;-100;-150120

105

90

75

60

45

30

15

0

13-PWB-050-13-C

13-PWB-080-14-D13-PWB-100-14-D

13-PWB-150-14-E

RatedCurrent

5A

10A

20A

35A

50A

80A

100A

150A

200A

Model

13-PDB-005-12-A

13-PDB-010-12-A

13-PDB-020-12-B

13-PDB-035-12-B

13-PDB-050-13-B

13-PDB-080-13-C

13-PDB-100-14-C

13-PDB-150-14-C

13-PDB-200-14-D

A

B

C

G

A'

B'

C'

A

B

C

G

A'

B'

C'

Circuit 1

Circuit 2


Features Excellent attenuation for high voltage impulse Metal case provides effective EMI shielding Epoxy molded for internal component reliability Excellent filtering characteristics for both normal

and common mode Various current ratings available: from 5 to 200 Amps Operating temperature: -40°C to +85°C Designed for 3-phase, 3-line connection systems


and converters)

Circuit Diagram

Note: Test Voltage 2250VDC one minute, line to ground.Insulation Resistance: 500MΩ.

Pow

er L

ine

Filt

ers



440/250VAC


4.5mA

9.0mA

20mA


30°C

CircuitDiagram

1

2

13-PDB Series

AB

C

E

L

M

I

G

D

H P

F

KNJ



Pow

er L

ine

Filt

ers


13-PDB Series

DimensionsModel

13-PDB-005-12-A

13-PDB-010-12-A

13-PDB-020-12-B

13-PDB-035-12-B

13-PDB-050-13-B

13-PDB-080-13-C

13-PDB-100-14-C

13-PDB-150-14-C

13-PDB-200-14-D

A

7.2(184)

9.6(243)

13.9(354)

B

6.3(160)

8.7(220)

12.6(320)

C

7.9(202)

10.3(261)

15.1(384)

D

1.6(42)

2.3(58)

2.5(66)

E

2.4(60)

2.7(70)

6.1(155)

7.5 (190)

F

3.3(86)

3.9(100)

7.3(185)

8.6 (220)

G

.70(18)

.98(25)

1.2(30)

1.4 (35)

H

2.3(58)

3.5(90)

3.9 (100)

I

M4

M6

M8

J

1.5(38)

2.3(58)

2.4(62)

M

–

2.9(74)

3.3(86)

K

–

M4

N

–

1.9(49)

2.2(56)

2.4 (61)

P

M4

M6

M8

L

.25 x .37 (6.4 x 9.4)

.25 x .37 (6.4 x 9.5)

.25 x .38 (6.4 x 9.6)

.25 x .38 (6.4 x 9.7)

.25 x .38 (6.4 x 9.8)

.25 x .39 (6.4 x 9.9)

.25 x .36 (6.4 x 9.10)

.25 x .36 (6.4 x 9.11)

.25 x .36 (6.4 x 9.12)

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

Common Mode

50ΩLevelMeter50Ω

1 32 4

Filter

Oscillator50Ω

50Ω

Normal Mode

13-PDB-005;-010;-020;-035

Inse

rtio

n Lo

ss (d

B)

120

Frequency (MHz)

105

90

75

60

45

30

15

0

13-PDB-010-12-A

13-PDB-020-12-B

13-PDB-035-12-B

13-PDB-005-12-A

0 0.01 0.02 .1 1 10 20 30 60

13-PDB-050;-080;-100;-150;-200

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

120

105

90

75

60

45

30

15

0

13-PDB-050-13-B

13-PDB-080-13-C

13-PDB-100-14-C

13-PDB-150-14-C

13-PDB-200-14-D

0 0.01 0.02 .1 1 10 20 30 60

13-PDB-005;-010;-020;-035

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

120

105

90

75

60

45

30

15

0

13-PDB-010-12-A

13-PDB-020-12-B

13-PDB-035-12-B

13-PDB-005-12-A

0 0.01 0.02 .1 1 10 20 30 60

Inse

rtio

n Lo

ss (d

B)

Frequency (MHz)

13-PDB-050;-080;-100;-150;-200120

105

90

75

60

45

30

15

00 0.01 0.02 .1 1 10 20 30 60

13-PDB-050-13-B

13-PDB-080-13-C

13-PDB-100-14-C

13-PDB-150-14-C

13-PDB-200-14-D



Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s

The High Performance Power Line Filters shown on pages99 through 105 are designed to meet the following criteria.

The information shown can be used as a basis for filter specifications. (Contact factory for additional details).

OrderTest of Examination Test Method Post Test

Group Test or Test (Per MIL-STD-202) Requirements

1 Voltage Drop Paragraph 4.6.8 of MIL-F-15733 Three percent of rated voltage max.

2 Leakage Current UL 1283 Per applicable specification

3 Temperature Rise MIL-F-15733 Paragraph 4.6.4 25°C max.

4 Terminal Strength Method 211, Condition ANo evidence of loosening or rupture.5 lb. applied force. Line Cords: 35 Lbs.

1 Shock, Medium Impact Method 213, Condition G Must pass DWV and Insertion Loss

2 Vibration, High Frequency Method 204, Condition A Monitor for shorts or open

3 Thermal Shock Method 107, Test Condition A Pass 90% DWV IR to be 30% of initial

4 HumidityMethod 107, Condition B, except

Pass 90% DWV IR to be 30% of initialtemperature equals 25°C

1 LifeMethod 108, Condition D 1.2 x Rated AC voltage Pass 90% DWV insulation resistanceat max. operating temp. or 1.4 x DC voltage to be 30% of initial.

IIA

IIB

III

Features High common and differential mode attenuation Standard designs up to 100 Amps Excellent insertion loss characteristics up to 1 GHz Voltage rating 115-250VAC and 400VDC up to 400 Hz Available to meet MIL-F-15733 and MIL-STD-461

standards Available to meet TEMPEST and FCC requirements Custom designs available

Applications Military Ruggedized computers Commercial & Radar

military/aerospace Electronic warfare Secured communications Ground/air weapon systems Switching power supplies Satellites Data processing equipment

Test Specifications



Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s

52-600-001 5A 120/240VAC -40°C to +65°C .20 1 mA COMM 33 65 80 80 80 80 60

60 Hz DIFF 37 65 80 80 80 – –

52-600-002 10A 120/240VAC -40°C to +65°C .10 1 mA COMM – 50 70 80 80 70 60

60 Hz DIFF 25 50 75 80 80 – –

DCR. LeakageCurrent Voltage Temperature max. Current Mode

Model Rating Rating Rating (ohms) (max.) (max.)

Minimum Insertion Loss(db) Per MIL-STD-220

50K 150K 300K 1M 10M 100M 1G

Consult factory for UL/CSA approval availability.

LINE LOAD

Circuit Schematic

Insertion Loss52-600-001

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80

common mode

differential mode

52-600-002

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80

common mode

differential mode

.215(5.46) 1.250

(31.75)

.240(6.10)

2.500(63.50)

SWITCH

FUSECONNECTOR

.625(15.8)

1.68(42.67)

#6-32 THREADEDINSERTS (4 PL.)(3.50-32)

2.98(75.70)

.250 Fast-on tabs (3 PL.)

3.88(98.55)

.03 R. 4 PL

CHASSISMOUNTINGHOLE

2.120 ± .010(53.85) 2.500

(63.50)

1.250(31.75)

.250(6.35)

52-600-00152-600-002

Dimensions



HIGH PERFORMANCE

Power Line Filters for C.O.T.S./TEMPEST Applications

52-523-002 5A 120/240VAC -40°C to +65°C .25 1 mA COMM – 55 60 80 80 70 60

60 Hz DIFF – 50 60 80 80 – –

DCR LeakageCurrent Voltage Temperature max. Current Mode

Model Rating Rating Rating (ohms) (max.) (max.)


50K 150K 300K 1M 10M 100M 1G


Circuit Schematic

LINE LOAD

52-523-002

.600 (15.24)

.750 (19.05)

.250 (6.35)

.250 (6.35)

3.000 (76.2)

2.010 (51.05)

.375 (9.52)

#6-32 THDED

INSERT 4 PLCS. (3.50-32)

.625 (15.8)

1.25 (31.75)

3.50 (88.9) .875

(22.2)

.875 (22.2)

1.75 (44.4)

4.00 (101.6)

PLUG

FUSE-HOLDER

# 52-600-00152-600-002

Dimensions


52-523-002Insertion Loss

52-523-002

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80


Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s



1212-0502 10A 350VDC -55°C to +125°C .01 1 mA 5000pF 20 65 70 70

240VAC 60 Hz

DCR LeakageCurrent Voltage Temperature max. Current Cx

Model Rating Rating Rating (ohms) (max.) Value


10M 100M 500M 1G


Insertion Loss1212-0502

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80

Circuit Schematic1212-0502

Dimensions


Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s

1212-0502

1.437 ± .031(36.50 ± .78)

.875(22.23)

1.250(31.75)

.187(4.75)

.209(5.31)

.418(10.62)

.500(12.7)

.219 TYP. (5.56)

.656(16.41)

.125

1.000(25.4)

1.187 ± .015(30.15 ± .38)

(3.18 ± .00)6-PLCS.

.281 ± .031(7.14 ± .78)

.055 TYP. (1.40)

.105 TYP. (2.67)

.120 TYP. (3.05)

MOUNTING SURFACE .032 (.81)

.710 (18.03)

.594± .031± (.78)

1.125(28.58)


Military/AerospaceMultisection FiltersMilitary/AerospaceMultisection Filters

Insertion Loss52-378-002, -004 MIL-STD-220

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80

.750(19.05)

1.500(38.10)

2.50(63.50)

#8-32 UNC THD. INSERTS(4.17-32).350 DEEP, 2 PLACES(8.89)

1.25(31.75)

2.50(63.50)

CONNECTOR #8001-14S-7P-A3MATES WITH MS-3106-14S-7S

1.75(44.45)

Minimum Insertion Loss (db)

50 150 300 1 10 100 1KHz KHz KHz MHz MHZ MHZ GHz

52-378-001 3 Amps 240VAC 60 Hz -55°C to 85°C .3 50 mA A 30 60 70 80 80 70 70Line to Line

52-378-002 5 Amps 240VAC 60 Hz -55°C to 85°C .2 50 mA B 24 64 70 80 80 70 70Line to Line

52-378-004 5 Amps 240VAC 60 Hz -55°C to 85°C .2 50 mA A 34 64 70 80 80 70 70Line to Line

52-378-005 3 Amps 240VAC 60 Hz -55°C to 85°C .3 50 mA B 40 70 80 80 80 70 60Line to Line

DCR LeakageCurrent Voltage Temperature max. Current

Model Rating Rating Range (ohms) (max.) Schematic

Spectrum's electromagnetic compatibility expertise in the secure communication or “TEMPEST” arena is rep-resented by this group of high performance filters. Theseunits are especially well suited for use in MIL-STD-461applications to reduce conducted emissions. The filtersare manufactured with glass sealed terminalsand connectors.

Features Excellent insertion loss profile Available for DC & AC applications up to 400 Hz Available for 3-14 Amp applications Custom systems can be designed

to your specific needs QPL to MIL-F 15733/63-0001

52-378-002

LINE LOAD

A

C

B

A

C

B

A

C

B

A

C

B

LINE LOAD

Filter Schematic A

Filter Schematic B


Dimensions

Secure Communications

Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s


103

Power Line Filtersfor Secure Communications

Minimum Insertion Loss (db)

50 150 300 1.0 10 100 1KHz KHz KHz MHz MHz MHz GHz

52-387-010 1 10 Amps 240VAC 60 Hz -55°C to 85°C .2 50 mA C common 24 60 70 80 80 70 70Line to Line

common 34 64 70 80 80 70 70

52-387-012 1 5 Amps240VAC 400 Hz

-55°C to 85°C .2 5 mA DLine to Line differential 30 30 70 80 80 – –

52-409-001 2 14 Amps 240VAC 60 Hz -55°C to 85°C .04 50 mA E common 14 30 45 80 80 70 60Line to Line

DCR LeakageCurrent Voltage Temperature max. Current

Model Fig. Rating Rating Range (ohms) (max.) Sch. Mode

Figure 1 Figure 2

.750(19.05)

1.500(38.10)

2.50(63.50)


1.25(31.75)

2.50(63.50)

CONNECTOR #8001-10SL-3PN-FP-A3MATES WITH MS-3106-10SL-3S

3.00(76.20)

1.25(31.75)

.750(19.05)

1.500(38.10)

2.50(63.50)


1.25(31.75)

2.50(63.50)

.625(15.87)

#8-32 UNC(4.17-32)STUD

CONNECTOR #8001-14S-7P-A3MATES WITH MS-3106-14S-7S

1.75(44.45)

Filter Schematic C

Filter Schematic D

Filter Schematic E

A

C

B

A

C

B

LINE LOAD

A

C

B

A

C

B

LINE LOAD

A

C

B

A

C

B

LINE LOAD

52-387-010, -003 MIL-STD-22052-409-001 MIL-STD-220

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80

52-409-001MIL-STD-220

52-387-010,-003 MIL-STD-220

Insertion Loss

Dimensions in inches (mm) Dimensions in inches (mm)

Dimensions


Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s

3 Phase and 400 Hz models available.Please consult the factory.



Features Meets applicable sections of MIL-F-15733 Excellent performance Integral IEC connector Available with integral fused IEC connector

and two pole switch Current ratings to 15 Amps Custom designs available Designed to meet TEMPEST requirements

Electrical SpecificationsRated current ranges .................. 3, 6, 10, 15 Amps

Rated voltage............................. 115-250VAC

Operating frequency................... 50-60 Hz

Maximum leakage current@115VAC 60 Hz............ 1.2 mA

@250VAC 50 Hz............ 2.5 mA

Test voltageLine-to-Line.................... 1450VDC

Line-to-Ground............... 2250VDC

Part Numbering System:

Insertion Loss

Common Mode (CM) is tested in a 50 ohm system with all lines tied together on the line and load sides of the filter.Differential Mode (DM) is tested in a 50 ohm system using a 180˚ phase splitter on both sides of the filter.

760 A 06 Q-

Model

Current Rating:3, 6, 10, 15 Amps

Terminal Style:A=.25 Quick ConnectC=Wire Leads (4" min.)

Series: 760; 761 or 762

760, 761, 762 - 3, 6 Amps

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80common mode

differential mode

760, 761, 762 - 10, 15 Amps

60

40

20

0

Inse

rtio

n Lo

ss (d

B)

0.01 0.1 1 10 100 1000Frequency (MHz)

80common mode

differential mode

Secure Communications

Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s



B

3, 6, 10, AMPFRONT PANEL

15 AMPFRONT PANEL

Switch Omittedin Model 761

6-32 UNC-2B(6 Places)

Switch Omittedin Model 761

1.30(33.02)

0.20(5.08)

1.875(47.62)

0.80(20.32)

3.67(93.21)

0.80(20.32)

0.20 (5.08)

3.00(76.2)

C

.40 (10.16)

.55 (13.97)

A1.30

(33.02)

Dimensions - 761, 762 Series

TERMINATIONSTYLE “A” STYLE “C”

B

1.312(33.32)

.66 (16.67)

1.332(33.83)

.67 (42.41)

8-32 Inserts (4 Places)

C

.95 (24.13)

.13 (3.30)

.55 (13.97)

A

1.23(31.24)

TERMINATION

Dimensions - 760 Series



Current Filter DimensionsSeries Rating

(Amps) A B C

3, 62.25 3.00 1.88

760(57.15) (76.20) (47.75)

10, 155.50 3.15 2.10

(139.70) (88.01) (53.34)

Current Filter DimensionsSeries Rating

(Amps) A B C

761, 762 3, 62.55 2.97 1.88

(64.77) (75.43) (47.75)

761 10, 155.50 3.15 2.10

(139.70) (88.01) (53.34)

762 10, 155.75 3.15 2.10

(146.05) (88.01) (53.34)

Mili

tary

/Aer

ospa

ce M

ultis

ectio

n Fi

lter

s

Custom/ApplicationSpecific Filters

Cus

tom

/App

lica

tion

Spe

cifi

c Fi

lter

s

SpectrumControl will address virtually any requirement fora custom power product. Our many years of experience inproviding EMI/RFI solutions has allowed us to satisfy bothglobal EMC regulations and time-to-market constraints.Spectrum Control’s engineering expertise and verticalintegration reduces your speed-to-market, as well assaves you money.

Features/Benefits Incorporates filtering and custom circuitry into one

design package SCI’s EMC Test Facility will define compliance issues Current and voltage ratings to meet your specifications Specific circuit designs to accommodate your application Reduces your development time Increases speed-to-market Designed to perform in industrial environments Designs incorporate filtering for both common and

differential modes Ensures reliability (all parts are 100% tested) Designed to meet agency approvals

Options EMI filtering Power distribution Transient protection Indicator lights Circuit breaker protection Leads or studs Voltage cut-off Agency approvals Reverse polarity

Performance CharacteristicsInsertion loss range Effective filtering from 10 KHz to

10 MHz with proper installation

Current ratings (max.) up to 500 Amps

Voltage ratings (max.) 400VDC and 240VAC standard, custom ratings available

Leakage current ratings Varies, low leakage designs available

Temperature -25° C to +85° C

Specify your required current rating, voltage ratingsand capacitance value.


EMI Filtering


Cus

tom

/App

lica

tion

Spe

cifi

c Fi

lter

s


107

Power Distribution

EMI Filtering

Transient Protection

Power Entry

-48 VDC-60 VDC

Low Voltage Cut-off UL Recognized Complies to UL 1459

CSA Certified

Custom Ground Plate

CircuitBreakerProtection

PowerDistribution

MultipleOutlets

Three-Phase Delta EMI Filter

High CurrentTerminal Block

Pigtail Leads

RuggedConstruction


Cus

tom

/App

lica

tion

Spe

cifi

c Fi

lter

s


Spectrum Control's design teams can help transform a functional electronic design into an easy to install EMI filtered package containing all required components.We will define your EMC problem through our test facilities, develop a filter solution and manufacture product to meet your schedule.

By designing and manufacturingyour entire assembly,Spectrum Control will: Reduce development time Combine your design into a compact, filtered package Simplify installation, saving time and money Increase productivity Complement your inventory control program Reduce your vendor base

PowerLine Filters


Cus

tom

/App

lica

tion

Spe

cifi

c Fi

lter

s


109

Remote control options available with intelligent powerdistribution units.

Single Line Filters

FilteredTerminal Blocks

Power Distribution Units

PSM High CurrentSurface Mount Filters

Part Number Index

Spectrum part # . . . . . . . . . . .Page

10-BPF-XXX-2-X . . . . . . . . . . . . . .3210-BPF-XXX-5-X . . . . . . . . . . . . . .3010-BPL-XXX-5-X . . . . . . . . . . . . . .3811-MPC-XXX-X-X . . . . . . . . . . . . .5812-MMB-XXX-5-X . . . . . . . . . . . . .8212-MMB-XXX-5-X . . . . . . . . . . . . .8612-MMB-XXX-11-X . . . . . . . . . . . .8412-MMF-XXX-5-X . . . . . . . . . . . . .8212-MMF-XXX-5-X . . . . . . . . . . . . .8612-MMF-XXX-11-X . . . . . . . . . . . .8412-PMB-XXX-DC-X . . . . . . . . . . . .7812-PMB-XXX-X-X . . . . . . . . . . . . .7612-PMF-XXX-DC-X . . . . . . . . . . . .7812-PMF-XXX-2-X . . . . . . . . . . . . .6612-PMF-XXX-5-X . . . . . . . . . . . . .7212-PML-XXX-X-X . . . . . . . . . . . . .6613-PDB-XXX-XX-X . . . . . . . . . . . .9213-PDB-XXX-XX-X . . . . . . . . . . . .9613-PDF-XXX-XX-X . . . . . . . . . . . .9213-PDL-XXX-XX-X . . . . . . . . . . . .9213-PWB-XXX-XX-A . . . . . . . . . . . .9413-PWB-XXX-XX-B . . . . . . . . . . . .9413-PWB-XXX-XX-C . . . . . . . . . . . .9413-PWB-XXX-14-D . . . . . . . . . . . .9413-PWB-XXX-XX-E . . . . . . . . . . . .9413-PWB-010-12-D . . . . . . . . . . . . .9013-PWB-015-12-D . . . . . . . . . . . . .9013-PWB-020-12-D . . . . . . . . . . . . .9013-PWB-025-12-D . . . . . . . . . . . . .9013-PWB-030-12-D . . . . . . . . . . . . .9013-PWF-XXX-XX-X . . . . . . . . . . . .9013-PWL-XXX-XX-X . . . . . . . . . . . .9052-226-001 . . . . . . . . . . . . . . . . . .2052-226-002 . . . . . . . . . . . . . . . . . .2052-226-004 . . . . . . . . . . . . . . . . . .2052-226-006 . . . . . . . . . . . . . . . . . .2052-226-008 . . . . . . . . . . . . . . . . . .2052-226-009 . . . . . . . . . . . . . . . . . .2052-226-011-XX . . . . . . . . . . . . . . .1252-226-015 . . . . . . . . . . . . . . . . . .20


52-226-016-XX . . . . . . . . . . . . . . .1652-226-019-XX . . . . . . . . . . . . . . .1852-226-020-XX . . . . . . . . . . . . . . .1452-226-021-XX . . . . . . . . . . . . . . .1252-226-026-XX . . . . . . . . . . . . . . .1652-226-029-XX . . . . . . . . . . . . . . .1452-226-031-XX . . . . . . . . . . . . . . .1252-226-036-XX . . . . . . . . . . . . . . .1652-226-037-XX . . . . . . . . . . . . . . .1852-226-041-XX . . . . . . . . . . . . . . .1252-226-046-XX . . . . . . . . . . . . . . .1652-267-002 . . . . . . . . . . . . . . . . . .2052-267-003 . . . . . . . . . . . . . . . . . .2052-267-008 . . . . . . . . . . . . . . . . . .2052-267-009 . . . . . . . . . . . . . . . . . .2052-267-010 . . . . . . . . . . . . . . . . . .2052-267-011 . . . . . . . . . . . . . . . . . .2052-267-012 . . . . . . . . . . . . . . . . . .2052-378-XXX . . . . . . . . . . . . . . . .10252-387-XXX . . . . . . . . . . . . . . . .10352-409-XXX . . . . . . . . . . . . . . . .10352-523-002 . . . . . . . . . . . . . . . . .10052-600-XXX . . . . . . . . . . . . . . . . .9952-1013-XXX . . . . . . . . . . . . . . . .2360-BHP-XXX-X-X . . . . . . . . . . . . .5660-BHS-XXX-X-X . . . . . . . . . . . . .2860-BPF-XXX-X-X . . . . . . . . . . . . .2660-BPL-XXX-X-X . . . . . . . . . . . . . .3660-BPP-XXX-X-X . . . . . . . . . . . . .5460-BPR-XXX-X-X . . . . . . . . . . . . .2460-BPS-XXX-X-X . . . . . . . . . . . . .2460-SPL-XXX-X-X . . . . . . . . . . . . . .3460-SPR-XXX-X-X . . . . . . . . . . . . .4060-SPS-XXX-X-X . . . . . . . . . . . . .4061-MPC-XXX-X-XX . . . . . . . . . . . .5262-AFC-XXX-X-XX . . . . . . . . . . . .6062-AFL-XXX-X-XX . . . . . . . . . . . . .6062-LMF-XXX-X-XX . . . . . . . . . . . .6862-LMB-XXX-X-XX . . . . . . . . . . . .6862-MMF-XXX-X-XX . . . . . . . . . . . .80


62-PMB-XXX-5-XX . . . . . . . . . . . .7062-PMB-XXX-6-XX . . . . . . . . . . . .8862-PMB-XXX-X-XX . . . . . . . . . . . .7462-PMF-XXX-5-XX . . . . . . . . . . . .7062-PML-XXX-X-XX . . . . . . . . . . . .6462-PPF-XXX-X-XX . . . . . . . . . . . .6262-PQF-XXX-X-XX . . . . . . . . . . . .6262-PRF-XXX-X-XX . . . . . . . . . . . .6263-PMF-XXX-8-XX . . . . . . . . . . . .8863-PMF-XXX-9-XX . . . . . . . . . . . .8864-BFF-XXX-X-X . . . . . . . . . . . . . .4264-BFS-XXX-X-X . . . . . . . . . . . . .4264-BSF-XXX-X-XX . . . . . . . . . . . .4664-SSF-XXX-X-XX . . . . . . . . . . . .4665-BFF-XXX-X-X . . . . . . . . . . . . . .4265-BFS-XXX-X-X . . . . . . . . . . . . .4265-BSF-XXX-X-XX . . . . . . . . . . . .4665-SSF-XXX-X-XX . . . . . . . . . . . .4666-BFF-XXX-X-X . . . . . . . . . . . . . .4466-BFS-XXX-X-X . . . . . . . . . . . . .4466-BFS-XXX-X-X . . . . . . . . . . . . .4466-BSF-XXX-X-XX . . . . . . . . . . . .4866-SSF-XXX-X-XX . . . . . . . . . . . .4867-BFF-XXX-X-X . . . . . . . . . . . . . .4467-BFS-XXX-XX . . . . . . . . . . . . . .4467-BSF-XXX-X-X . . . . . . . . . . . . .4867-SSF-XXX-X-X . . . . . . . . . . . . .4868-BSF-XXX-X-XX . . . . . . . . . . . .50760-XXXX . . . . . . . . . . . . . . . . . .106761-XXXX . . . . . . . . . . . . . . . . . .106762-XXXX . . . . . . . . . . . . . . . . . .1061212-0502 . . . . . . . . . . . . . . . . . .101


110

App

endi

x


111

Notes

App

endi

x

Notes


112

App

endi

x


113

Design Inquiry Form

Request for Quote/Custom Design Form

Company name

Name/Title

Address

City State Zip

Phone ( ) Fax ( )

Target price

Anticipated yearly usage

Life of program

Customer Time Line (fill in dates):

Quotation

Prototype

First Article

Production Start Up

Product Offering Suggested for this Application:

(Check appropriate response)

Custom Assembly (Multi-Section Filter)

Custom Assembly (Power Distribution Unit)

Power Entry Filter

High Current Single/Dual Line Filter

Physical ParametersMechanical Requirements:

Maximum Dimensions:

Length (inches) Height (inches)

Width

Please include drawing or sketch, if available.

Electrical ParametersElectrical Terminations:

LINE SIDE LOAD SIDE

Connector

Studs

Pigtails/leads

Connector

Terminal

Block

Other

Outlet/Inlet Type: Duplex Single

IEC Vendor P/N

Other

AC Requirements: 120VAC 250VAC

Other

Frequency (Hz): 50 400

60 Other

Current (Amps): Current/ phase (Amps):

Phase requirements:

Single

Three

Delta (3 wires)

Wye (4 wires)

Other

Leakage Current: mA (max.)

DC Requirements: Voltage:

Current (Amps):

Insertion Loss Requirements: Common mode (load) (no load)

Differential mode (no load)

Accessories

SurgeSuppression: No Yes

Define

CircuitBreaker: Yes No

Current Rating

Voltage Rating

Vendor P/N

Switches: Lighted Non-lighted

Remote None

AgencyApprovals: UL CE

CSA TUV

Other

App

endi

x

&Control Products

Systems Company

A

As A Control Products & Systems Company, we strive to meet our customers’ needs by providing greatercomponent and system solutions to their design problems.Our family of interference, power and microwave products is now the broadest line in the industry. These engineeringdriven products deliver unmatched performance in the high frequencies common to new applications.

To satisfy the increased demand that corresponds with our growth, we’ve conducted a major manufacturingexpansion. This additional manufacturing capacity involves all of our facilities and is highlighted by our new plants inJuarez, Mexico and Guang Dong, China. These expandedfacilities produce components and systems for all of ourgroups and have received numerous positive customer audits.

Signal & Power Integrity GroupAs a vertically integrated producer of ceramic capacitors and filters, we continue to provide the widest range ofdiscrete EMI filters, filtered connectors, ferrite inductors and filtered power products. In addition, we have extended our ceramic technology to develop our line of wireless components. Low Pass EMI Filters Filtered Terminal Blocks

and Filter Plates Filtered Connectors Datacom Connectors Ferrite Inductors

Frequency Control GroupIn order to expand our line of microwave products, we recently acquired FSY Microwave, including all products and design expertise. The new Spectrum FSY Microwave family of SPECWAVE components and systems provides a wide range of frequency control solutions. Bandpass Filters

and Duplexers Patch Antenna

Elements Waveguide Filters Lumped Element Filters

Power Management Systems GroupSeveral years ago, we began to apply our fundamental filtering expertise to improve power management. The result is a complete line of standard, yet customizable power distribution units and remote management systems. SMARTstart AC/DC Intelligent

Power Distribution Units SHARPstart AC/DC Power Distribution Units Custom Commercial Assemblies

Ceramic Capacitors Single Line Filters Filtered Terminal Blocks Power Entry Modules

and Power Line Filters Multisection Filters

CERTIFIED

EMI Filtersand FilteredPowerProducts

FrequencyControlProducts

PowerManagementSystems

GlobalManufacturing

Suspended Substrates Cavity Filters Coaxial Tubular Filters Microwave Custom

Assemblies


114

Our new Check Stock system allows you to gather instant information regarding a particular component’s inventory status at Spectrum Control’s network of authorized distributors.Selecting the Check Stock icon will provide you with distributornames, part numbers, quantity on hand, online ordering capability and the last date the inventory was updated for that particular component. Use Check Stock to improve yourorganization’s efficiency by simplifying inventory managementand reducing inventory

We’ve made finding the right product for your applicationeasier than ever. By using our new online catalog you can tellus the performance parameters you need and we’ll help youlocate the appropriate product. You start by identifying yourmechanical package, add some required electrical characteristicsand we’ll show you applicable standard part numbers and howthey compare to your specifications.

New Design Direct allows you to work with our engineers in acollaborative online effort to develop a custom solution tailoredto your specific needs. After registering on our site, you’ll beable to create and track your project, entirely online. As ourengineering team makes changes to your project, you’ll receivean e-mail with a direct link to see the current status and providefeedback. Designing a custom solution has never been easier.

To see all of our new online tools,come visit us @ www.spectrumcontrol.com


115

AHA 12/03 20M 27-0027-0046 © Spectrum Control, Inc. Printed in U.S.A.

Corporate Headquarters

8031 Avonia RoadFairview, Pennsylvania 16415Phone: 814-474-2207Fax: 814-474-2208

Signal & Power Integrity

8061 Avonia RoadFairview, Pennsylvania 16415Phone: 814-474-1571Fax: 814-474-3110

Sales Offices

NORTH AMERICA6798 Oak Hall Lane Columbia, Maryland 21045Phone: 301-916-2919Fax: 301-916-2910

EUROPESpectrum Control GmbHHansastrasse 691126 Schwabach, GermanyPhone: (49)-9122-795-0Fax: (49)-9122-795-58

CHINASpectrum Control LimitedRoom 73-78 - 2nd FloorSino Industrial Plaza9 Kai Cheung RoadKowloon BayKowloon, Hong KongPhone: (011)-852-2197-9912Fax: (011)-852-2750-9663

For additional information regardingSpectrum Control, our full line ofEMI filtering and power productsand our many new products,call us or contact our Website athttp://www.spectrumcontrol.com

Spectrum Control, Inc. reservesthe right to alter the specificationsprovided in this publication.Consult factory for currentspecifications.

CERTIFIED

Represented or Distributed by:

&Control Products

Systems Company

A

Signal & Power Integrity Products

Ferrite beads & inductorsSurface mount filters

Discrete EMI filtersFilter plates

Filter connectorsGaskets & shieldingCeramic capacitors

Single line filtersFiltered terminal blocks

Power entry & power line filtersMilitary/multisection filters

EMC testingwww.spectrumcontrol.com

Frequency Control ProductsResonators

Bandpass filters & duplexersPatch antenna elements

Waveguide filtersCombiners

CouplersDuplexer-LNA assemblies

Lumped element filtersSuspended Substrates

Cavity filtersCoaxial tubular filters

Microwave custom assembliesTower mount amplifiers

www.specwave.com

Power Management SystemsAC/DC power distribution units

& remote reboot power management systemsCustom assemblies

Power stripswww.specpower.com

NEW

NEW

NEW

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information: API Technologies:

1212-0502

http://www.mouser.com/spectrumsignal

http://www.mouser.com/access/?pn=1212-0502

emi power filters catalog - mhz electronics elements provide ... emi power filters selection guide...

Documents