electronic crossing bell - national electric gate … · national electric gate company n a t i o n...
TRANSCRIPT
For more information or prototype sample please give us a call or fax us at
912-748-5090 FAX 912-748-7542
National Electric Gate Company NNAA
TTIIOO
NNAALL
EELLEECCTTRRIICC
GGAA
TTEE
CCOO
..NA
TIO
NAL
ELECTRIC
GA
TE
CO
.
Electronic Crossing Bell
The tone of the bell is on a microchip and is sounded thru an outdoorspeaker. The warning sound is a duplicate of the mechanical
bell sound. It utilizes the same electrical leads as the mechanical bell and is positioned on top of the mast pole. The electronic
bell meets or exceeds all the arema specifications. The bell circuit draws less than 0.15 amps, which is 10 percent of the current
draw of the mechanical bell. Sound reading range of 85 to 95 decibels in a 180 degree plane. 250 strokes per minute. Operating
voltage of 10 + - 25 % volts dc . Mounts to a 4 or 5 inch mast pole. There is access to the volume control. Dimensions of bell upon
request. Weight is less than 10 pounds.
Features
4 Inch and 7 Inch Diameter
Item Description NEG Number
1 Bell Part NEG-1210 EBL
1A Bell Part with a lightning arrestor included NEG-1210EBL/S
on the circuit board