eilis j. rosenbaum, netl yongkoo seol, netl · 2018. 12. 26. · experimentalist, chemistry –...
TRANSCRIPT
NETL Lab / Experimental EffortsEilis J. Rosenbaum, NETLYongkoo Seol, NETL
2
Project PersonnelRobert P. Warzinski – Team Leader of Methane Hydrate Research (NETL)Experimentalist, Chemistry – hydrate research 1993 to present
– Qualifications:• B.S. Chemistry, Waynesburg College, 1974• M.S. Chemistry, Duquesne University, 1976• E.I.T. Certification, 1992
Eilis J. Rosenbaum – Project Engineer (NETL)Experimentalist, Chem. & Mech. Engineering – hydrate research 2001 to present
– Qualifications:• B.S., Chem. Eng., Geneva College, 2001• B.S.E., Mech. Eng., Geneva College, 2001• E.I.T. Certification, 2001• M.S. Chem. Eng., University of Pittsburgh, 2004
– Thesis: “Thermal Properties and Characterization of Methane Hydrates”Ronald Lynn – Engineering and Electrical Specialist (NETL – Parsons)Experimentalist/Technical Specialist – hydrate research 1993 to present
– Qualifications:• Associate in Specialized Electronics Degree, Penn Technical Institute, 1973• Penn State/CCAC College courses, 1989 to 1991• E.I.T. Certification, 1992• Extensive experience with process instrumentation and design
3
Project PersonnelDr. David Shaw – University Research Associate (ORISE Visiting Faculty)Experimentalist, Mechanical Engineering – hydrate research 1992 to present
– Qualifications:• B.S.M.E., Geneva College, 1983• M.S., Mech. Eng., The Ohio State University, 1986• Ph.D., Mech. Eng., The Ohio State University, 1988• Professor of Mechanical Engineering, Geneva College, 1990 – present
Yongkoo Seol – Project Engineer (NETL)Experimentalist, Geology / Physical Science – hydrate research 2005 to present
– Qualifications:• B.S., Seoul National University, Seoul, Korea, 1989 • M.S., Hydrogeology, Western Michigan University, 1993 • Ph.D., Soil Chemistry, Purdue University, 1998 • Post Doctoral Researcher, Ohio State University, 1998-2001• Geological Scientist, Lawrence Berkeley National Lab., 2001-2007
Wu Zhang – Project Engineer (NETL - WVU)Experimentalist, Chemical Engineering – hydrate research 1998 to present
– Qualifications:• B. E. Chemical Engineering, North-western Polytechnical University (NPU), China. 1982• M. E. Dept. of Chemical Engineering, NPU, and the Aviation Material Institute. 1986• Ph.D., Polymer Composites and Experimental Mechanics, NPU, 1993• Ph.D., Natural Gas Hydrates, The Dept. of Chemistry, King's College London, University of London.
1995-1998.• Postdoctoral Research Staff member, Lawrence Livermore National Laboratory (LLNL)
4
Presentation Outline
Projects to be Reviewed
1. Thermophysical Properties of Methane Hydrate (current)
2. Kinetic Study on Methane Hydrate Induction and Reformation (current and proposed)
3. Observation of Gas Migration and Hydrate Formation in Saturated Porous Media(proposed)
Thermophysical PropertiesPresented by: Eilis Rosenbaum
6
Programmatic Relevance“The primary goal of the National Methane Hydrate R&D Program
is to provide the knowledge and technologies to fully realize the potential of methane hydrates in supporting our nation's continued economic growth, energy security, and environmental protection. The program will achieve this goal by focusing on four key issues (NETL, 2007b): – Understanding the role hydrates play in global processes such
as climate and the carbon cycle. – Investigating the impact of hydrates on seafloor stability and
deep-sea life. – Developing the tools and knowledge that will ensure the safety of
drilling and producing deep-water oil and gas resources located below marine hydrate deposits.
– Developing the knowledge and technology base to allow commercial production of methane from domestic hydrate deposits by the year 2015. “
http://www.netl.doe.gov/technologies/oil-gas/FutureSupply/MethaneHydrates/rd-program/goals.htmNational Methane Hydrate Multi-Year R&D Program Plan, U.S. Department of Energy, Sep. 2006, pp 34-35.
7
Programmatic Relevance
Near-Term Goals (by 2010)– “Conduct field and laboratory studies to determine 1) the
fundamental physical properties (flow capacity, mechanical strength, thermal conductivity, and others) of methane hydrate bearing sediments at different levels of hydrate saturation, and 2) how those physical properties might change during either intentional or natural hydrate dissociation.”
Long-Term Goals (by 2015)– “Provide a comprehensive knowledge base and suite of
analytical tools to support ongoing research into natural methane hydrates and their role in the global environment.”
8
Technical Challenges
•Formed under gas-rich environment.*•Likely cement sediment.*•High purity, reproducible samples.*
•Many form from dissolved gas.**•Likely do not cement grains.•Highly variable composition and properties.
Laboratory Formed Compacted Hydrate
* Waite et al, 2004; Winters et al., 2004 ** Buffet and Zatsepina, 2000
Naturally Occurring Hydrate
9
Goals and ObjectivesProject Objective:
– Provide high-quality thermal property data to benefit the development of models and methods for predicting the behavior of gas hydrates in their natural environment under production or climate change scenarios.
Near Term:– Adapt NETL’s laboratory approach
for measurements• in vessels designed to be
viewed in a CT Scanner;• and vessels designed to
preserve hydrate-bearing cores under natural conditions.
Long Term:– Develop tools for in situ
measurement.
k = 0.68 W/m-K
k = 0.5 W/m-K
Production ScenarioSimulation
10
Environmental ChamberExperiment Design
HTMDSample
Container
SampleContainer
InsideHTMD
Sensor
Compacted Methane Hydrate
NETL’s Scientific Approach
11
• Measurement reflects properties of sample and sensor support (PVC).
• Reproducible conductivity values obtained by using an energy partitioning method.
• Diffusivity sensitive to differing time scales.
• Diffusivity requires more rigorous approach – finite difference model.
• FD model is being developed for analysis of experiment data to determine the diffusivity.
Sample
Sample
Sample
PVC
ozPPower 2=Sample
Sample
Sample
PVC
Sample
Sample
Sample
PVC
ozPPower 2=
1 SidedMeasurement
2 SidedMeasurement
Innovative One-SidedMeasurement
Sensor surrounded
by water
NETL’s Scientific Approach
12
Temperature (K)250 255 260 265 270 275 280 285 290 295
k (W
m-1
K-1
)
0.50
0.55
0.60
0.65
0.70
0.75
0.80
(Water, NIST)
Huang & Fan, 2005
Waite et al., 2007
Rosenbaum et al., 2007
1 cm3
5.5 MPa Gas Phase 45 MPa Compaction
175 cm3
~102 MPa Compaction
~200 cm3
2 MPa Compaction
Thermal Conductivity – Experimental Data
13
Temperature (K)250 255 260 265 270 275 280 285 290 295
α x
107 (m
2 /s)
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
(Water, calculated, NIST)
deMartin, 2001
Kumar et al., 2004
Waite et al., 2007
Rosenbaum et al., 2007
Thermal Diffusivity - Experimental
14
Near Future Research Activities
• Fully adapt technique for incorporation into devices designed to preserve natural hydrate-bearing cores.– Current design enables mobility.
• Incorporate into NETL’s vessels designed for CT Scanning.
• Test configurations for development of in situ measurement device.
Keithley Source MeterProgrammed to be a
constant power source
Measurement Components
Sensor on support material
15
Budget and Staffing
150 k 150 k 150 k
20 k
86 k
10 k10 k2 k23 k
156 k
0 k
20 k
40 k
60 k
80 k
100 k
120 k
140 k
160 k
2005 2006 2007 2008 2009
ORD taxTrainingTravelORISESSCS&MTotal
0.4 FTE
1.0 FTE0.2 FTE
0.4 FTE
0.1 FTE
0.1 FTE
Actual FY08 Budgeted FY09
Visiting Faculty, ORISE
Engineering Specialist, RDS
Project Engineer, NETL
16
Publications
D.W. Shaw E.J. Rosenbaum, D.A. Clark, R.P. Warzinski; “Modified Transient Plane Source Probe for Measurement of Thermal Conductivity and Thermal Diffusivity in confined Samples,” in preparation. Target: Rev. Sci. Inst., 2009.
Warzinski, R.P., I.K. Gamwo, E.J. Rosenbaum, E.M. Myshakin, H. Jiang, K.D. Jordan, N.J. English, D.W. Shaw; “Thermal Properties of Methane Hydrate by Experiment and Modeling and Impacts upon Technology,” Proceedings: 6th International Conference on Gas Hydrates, Vancouver, Canada; July, 2008.
Rosenbaum, E.J, N.J. English, J.K. Johnson, R.P. Warzinski; “Thermal Conductivity of Methane Hydrate from Experiment and Molecular Simulation,” J. Phys. Chem. B, 112, 2007, 10207-10216.
Warzinski, R. P., R. J. Lynn, D. W. Shaw and E. J. Rosenbaum, “Thermal Property Measurements of Methane Hydrate Using a Transient Plane Source Technique,” in press, AAPG Hedberg Conference publication on Gas Hydrates.
Presentation Identifier (Title or Location), Month 00, 2008
Kinetic Study on Methane Hydrate Induction and Reformation in Porous MediumPresented by: Yongkoo Seol
18
Programmatic Relevance“The primary goal of the National Methane Hydrate R&D Program
is to provide the knowledge and technologies to fully realize the potential of methane hydrates in supporting our nation's continued economic growth, energy security, and environmental protection. The program will achieve this goal by focusing on four key issues (NETL, 2007b): – Understanding the role hydrates play in global processes such
as climate and the carbon cycle. – Investigating the impact of hydrates on seafloor stability and
deep-sea life. – Developing the tools and knowledge that will ensure the safety of
drilling and producing deep-water oil and gas resources located below marine hydrate deposits.
– Developing the knowledge and technology base to allow commercial production of methane from domestic hydrate deposits by the year 2015. “
http://www.netl.doe.gov/technologies/oil-gas/FutureSupply/MethaneHydrates/rd-program/goals.htmNational Methane Hydrate Multi-Year R&D Program Plan, U.S. Department of Energy, Sep. 2006, pp 34-35.
19
Programmatic Relevance
• Future program decisions regarding production will rely heavily on the forecasts of numerical reservoir simulations.*– “It is, therefore, imperative that laboratory measurements are
comprehensive and that they are rigorously reviewed to provide a robust foundation upon which reliable production models can be constructed.”
• The entire subject of prediction of gas production from hydrate deposits hinges on the availability of reliable models of hydrate dissociation. – “This is probably the most important challenge facing the gas
production effort”**
*National Methane Hydrate Multi-Year R&D Program Plan, U.S. Department of Energy, June 1999, pp 19-20.** Moridis, G.J., Knowledge Gaps in the Study of Gas Production from Hydrate Deposits, 2004
20
Current Status of the Problem
• Predicted secondary hydrate formation (SHF) during gas production from hydrate reservoir– by lowered temperature (Joule-Thompson effect and
endothermic nature of hydrate dissociation)– by elevated pressure (production shutoff and local
heterogeneity)– Modifications on production schemes to overcome SHF
21
Current Status of the Problem
• Is kinetics important?– Current equilibrium can poorly reproduce hydrate
formation pattern in a simple experimental column.CT Observation Simulation*
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 10 20 30 40
Distance from the Center (mm)
Satu
ratio
ns
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Tem
pera
ture
(°C
)
Equilibrium Model : Middle of Core
Water Saturation
Hydrate Saturation
Temperature
22
Current Status of the Problem• Previous studies
– Induction delay time: Sloan and Fleyfel (1991); Skovborget al. (1993); Barlow and Haymet (1993)
– Kinetics of hydrate formation and dissociation in two-phase condition (agitated reactor): Vysniauskas and Bishnoi (1983, 1985); Kim et al. (1987); Englezos et al. (1987); Clarke and Bishnoi (2002)
– Thermodynamics of hydrate formation: Munck et al. (1988)– Thermodynamics of hydrate formation in porous glass:
Smith et al. (2006)– Hydrate formation rates in fixed surface area: Holder
(1986)– Hydrate dissociation in porous media: Uchida et al. (2002,
2004); Klapproth et al. (2006)
23
Technical Challenges
• Probabilistic nature of hydrate inductions• Numerous key parameters:
– Porous Medium• Particle dimension, surface roughness, texture (particle size
distribution, and sorting), composition (mineralogy), etc– Driving Forces
• Types of Driving Forces– Lowered temperature at constant pressure (ΔT test)– Elevated pressure at constant temperature (ΔP test)
• Magnitude of Driving Forces– Thermal History of Waters
• Time gap between dissociation and reformation of hydrate
24
Technical Challenges• Separation of formation kinetics from heat and fluid
conductivity– Independent measurements for thermal conductivity and
relative permeability of fluids are necessary• Discrepancy between natural and synthesized
hydrates – Hydrate occurrences (i.e. pore filling, cementing, or
filming)– Phase saturations (water-gas system vs. dissolved gas
system) – Heterogeneity in natural sediments: grain size distribution,
surface roughness, compactness, etc.
25
Project Goals & Objectives
• Goal– Develop equipment and procedures to reliably and
reproducibly form methane hydrate and measure hydrate formation induction time and gas consumption rates in various porous media of interest
• Expected impacts– Provide information useful for
• Developing reliable kinetic models to be applied for numerical simulations of hydrate production
• Predicting potential impacts of hydrate formation kinetics on production strategies for hydrates
• Contributing to identify optimal models of hydrate formation for production simulation
26
Preliminary Studies
• Determination of induction time (Δt) for hydrate formation from dissolved CO2 in the presence of clay in a 100 cm3 stirred autoclave.
– 0.6 wt% bentonite reduced induction time by 7 to 50%.
9.6
10.1
10.6
11.1
11.6
12.1
12.6
270 275 280 285 290
T,K
P, M
Pa
NC 6/13/2008 BE 7/27/2008
ΔtNC
ΔtBE
No bentonite
0.6wt% bentonite
L1L2H
27
Approaches
• Developing two-phase (water-gas) system with porous medium– Reproducing secondary hydrate formation condition during
hydrate production– Static system (no vortex): Diffusion dominated gas transfer for
hydrate formation results in slower formation of hydrate.
– Sediment grain surface: Greater interface area between gas and liquid enhances hydrate formation.
– Unlimited gas supply
28
Approaches
• Multi-Pressure Vessel System (MPV)
– Advantages: X-ray transparent, quintuplicate– Disadvantages: Interference between vessels, no
confining pressure, small sample cross sections
AluminumPipe
Plastic Water Jacket
PlasticHolder
StainlessSteel EndCaps
Thermocouples
CoolingFluid
CoolingFluid
Gas Inlet
PorousMedium
AluminumPipe
AluminumPipe
Plastic Water Jacket
PlasticHolder
StainlessSteel EndCaps
Thermocouples
CoolingFluid
CoolingFluid
Gas Inlet
PorousMedium
AluminumPipe
29
Approaches
• Volumetric gas consumption rates
• Empirical kinetic equations– Example equation (Vysniauskas and Bishnoi 1983; Moridis
et al. 2005)
– History matching for kinetic parameters
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
10/26/2007 19:12
10/26/2007 21:36
10/27/2007 0:00
10/27/2007 2:24
10/27/2007 4:48
10/27/2007 7:12
10/27/2007 9:36
10/27/2007 12:00
Time
Tem
pera
ture
730
740
750
760
770
780
790
800
Pres
sure
(psi
)
InletOutletConfPressure
Pressure
Timeto tsol tind tend
pend
pind
po
,expexp γpTa
RTEAFK
tVr b
aAo
m ⋅⎟⎠⎞
⎜⎝⎛
Δ−⎟
⎠⎞
⎜⎝⎛ Δ−=
∂∂
=
30
Approaches
• Starting point:– Simple initial conditions:
• Constant temperature (3 °C), • Rapidly elevated pressure (800 psi), • Uniform size of glass bead (100 μm), • Relatively high initial water saturation (40%), • Fixed time interval between dissociation and reformation (24
hours)– Repeat the test to check reproducibility– Expand to include parameters: various porous media, P/T
conditions, driving forces, and thermal history• Collaborations: Dr. Timothy Kneafsey, LBNL
Presentation Identifier (Title or Location), Month 00, 2008
Observation of Gas Migration and Hydrate Formation in Saturated Porous MediaPresented by: Yongkoo Seol
32
Programmatic Relevance
• Critical needs for laboratory work– “To capture and understand the natural heterogeneities
that may play a major role in controlling the behavior of natural deposits as environmental conditions changes”*
– Given high priority in the near-term on determination of the model and distribution of hydrate in porous media
National Methane Hydrate Multi-Year R&D Program Plan, U.S. Department of Energy, Sep. 2006, pp 34-35.
33
Current Status of the Problem
• Fundamental observation at the sites at Hydrate Ridge, offshore Oregon and Blake Ridge, offshore South Carolina– co-existence of methane hydrate, gas and brine within
hydrate stability zone (HSZ)– Methane migration as a separate gas phase
• Previous Studies*: – Gas accumulations beneath HSZ may reach critical
thickness to open fractures in sediments or activate pre-existing faults will serve as conduits for fast gas migration.
– Competition between brine displacement and sediment fracturing determines extent of conversion of methane gas entering HZS to hydrate.
*Jain and Juanes (2008), Behseresht et al. (2008 a, b)
34
Current Status of the Problem
• Previous Studies*– Coarse-grained sediments favor capillary invasion– fracturing dominates in fine-grained media.
rmin = 1 mm rmin = 1 µmcapillary pressure
fracture opening
*Jain and Juanes (2008)
35
Project Goals & Objectives
• Goal– Develop equipment and procedures to visualize hydrate
formation modes in different sediments and to experimentally validate the model prediction and natural observations on lateral and vertical variability in hydrate saturation
• Expected outcome– Provide understanding on
• Relations between hydrate accumulation patterns and sediment grain sizes and/or layer configurations in the HSZ
– Contribute useful information • Better estimate the hydrate mass in varied sediments• Developing production strategies for hydrates
36
Technical Challenges
• Experimental setup reproducing natural conditions for sediments in hydrate stability zone– Heterogeneity in natural sediments: grain size distribution,
surface roughness, compactness, etc.– Simplifying layer configurations representing natural setup– Vertical orientation of core samples for buoyancy driven
gas migration– Identifying pressure and temperature condition
• Challenging visualization requiring high resolutions:– Identification of hydrate formation from water saturation
due to similar density between water and hydrate– Visualization of fine cracks or fissures potentially in fine
sediments
37
Approaches
• Vertical Pressure Vessel System (VPV)
– Accommodates vertical alignment of sample cores, tri-axial confining pressures, uniform gas phase boundary, and controlled temperature
Injection Port
ConfiningFluid Port
CoolingFluid Port
Outlet Port /Thermocouple
RubberSleeve
Sample
Confining Fluid
Aluminum Vessel
Aluminum Frit
X-ray
38
Approaches
• Volume CT with dual source– Pixel size in object: 5 μm to 1 mm– Voltages: 225 and 320 kV– Flexible object turntable
39
Approaches
• Conceptual layer configurations
Coarsegrained
Gas
Finegrained
gravity
Gas GasGas Gas
Base Schemes Modified Schemes Fault
– Show basic patterns of hydrate accumulations
– Show impacts of layer stratification normal or parallel to gas migration and the presence of fast fluid conduits
40
Timetable and Budget
# Task FY09 FY10 FY11
Hydrate Formation and Dissociation Kinetic Measurement1 Experiment Design and Setup
2 Preliminary Formation/Dissociation Test
3 Induction Time/Gas Consumption
4 Data Analysis for Model Developments
5 Inverse Modeling
6 Result Reporting
Gas Migration Observation1 Experiment Design and Setup
2 Preliminary Test and CT Optimization
3 Visualization of Gas Migration
4 Data Analysis
5 Result ReportingTotal Budget *$256K
* Projected
41
THANK YOU!
42
Thermal Conductivity – Modeling Data
- k for low-porosity methane hydrate = 0.65 to 0.70 W m-1 K-1Temperature (K)
250 255 260 265 270 275 280 285 290 295
k (W
m-1
K-1
)
0.50
0.55
0.60
0.65
0.70
0.75
0.80
Jiang et al.,2008
Gupta, et al.,2006
(Water, NIST)
Huang & Fan, 2005
Waite et al., 2007
Rosenbaum et al., 2007
43
- At present, the correlation of Waite et al., should be used for α.Temperature (K)
250 255 260 265 270 275 280 285 290 295
α x
107 (m
2 /s)
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
(Water, calculated, NIST)
deMartin, 2001
Kumar et al., 2004
Waite et al., 2007
Rosenbaum et al., 2007
Gupta, et al.,2006
Thermal Diffusivity - Modeling
Jiang et al.,2008
44
Preliminary Studies• Formation-dissociation of CO2 hydrate
– Agitated autoclave without the framework of porous media– Added bentonite as a component of porous media
0
5
10
15
20
25
270 275 280 285T, K
P, M
Pa
0.0163 0.0179 0.020 0.0242
0.0175
0.0172
CO2/H2O Mole ratio:
L-G line
glhQ2
l1l2h
0
5
10
15
20
25
270 275 280 285T, K
P, M
Pa
0.0163 0.0179 0.020 0.0242
0.0175
0.0172
CO2/H2O Mole ratio:
L-G line
glhQ2
l1l2h
Zhang, Y., G. D. Holder, R.P. Warzinski, (2008) Ind. Eng. Chem. Res. 47: 459-469.
45
Preliminary Studies
•Induction time of CO2 hydrate formation from liquid phase*
No ClayBentonite
0.59% % reduction
HP FC 0.74 0.69 7.14
LP FC 1.09 0.54 50.61
HP SC 2.68
LP SC 2.71** 1.78 34.38
*all data are average of 4 repeating experiments except the one noted with **, which is the result of a single experiment.FC, fast cooling, cooled down to -2.5ºC from 14ºC in about 4 hours; SC, Slow cooling, 0.1ºC/h.