EX2B-

EX2B- Edge EX 2 Bi-Directional

Sample Catalog #: EX2B-A-O-T5-1-1-24-AC48G1-120-1C-W-DG

Dust GuardSpecular Reflector6

Non-Illuminated ConnectorCustom ColorCanopy7

DG-SR-

CN-

CC-C-

A- __- T5__- 1- 1-

2-7/8”

4-3/4”

EX2B-A-O EX2B-A-WO

T5-T5HO-

T5 LampT5HO Lamp

A- Acrylic Lens

O-WO-

OpenAsymmetric Open

1- 1 Lamp Individual Units4-8-

4’8’

Continuous Runsxx’- Specify nominal

overall row length in 4’ increments

___- ___- __- __- __- ____

Aircraft Cable1

CONSTRUCTION 6063-T5 Extruded aluminum housing. Highly reflective die-formed white painted aluminum reflector, .125” diffuse snap-in acrylic lens with matte finish, removable for lamp replacement. Specular reflector standard with asymmetric open (WO).

ELECTRICAL Standard T5 and T5HO: Program start 120/277 volt integral electronic ballast with less than 10% THD. Through wiring with quick connects standard. Standard single circuit. Each ballast provided with disconnects to meet luminaire disconnect code requirement.

LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.

MOUNTING Aircraft cable and wall mount available. Aircraft Cable supplied with 5” power and 2” non-power cano-pies. Refer to installation instructions for appropriate ceiling detail Canopies, and power cables are painted white unless otherwise specified.

L U M I N A I R E S P E C I F I C A T I O N

Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.

Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239 Phone 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com© 2014 Pinnacle Architectural Lighting® June 2014

EX2BT5, T5HO Direct and Indirect Linear with Straight Lamps / Satine Lens

Project Name

TypeCatalog Number

Date

DIRECT INDIRECT LAMP TYPE

LAMP UP

HOUSING LAMPS DOWN

LENGTH MOUNTING VOLTAGE CIRCUITING FINISH OPTIONS

1C-2C-1D-2D-1B-2B-1E-

2E-

Single CircuitDual Circuit5

Single Circuit Dimming5

Dual Circuit Dimming5

Single Circuit with Battery Pack5

Dual Circuit with Battery Pack5

Single Circuit with Emergency Circuit5

Dual Circuit with Emergency Circuit5

1Standard 48” Adjustable Cable. Consult factory for additional lengths. 2Consult factory for tegular edged tiles. 3Replaces standard 2” canopy. 4347 and UNV not available with battery packs. 5Some Edge EX configurations will not accommodate all electrical options. Consult factory. 6Available on Indirect Open (O) option only. 7If canopy is to match fixture housing, must specify using CC-C. If not specified canopy will be standard matte white.

1- 1 Lamp

120-277-347-UNV-

120 V277 V347 V4

UNV4

(120/277)

Matte WhiteMetallic Silver7

Textured Black7

Bronze7

Custom Color7

W-S-BL-BR-CC-

AC48G1-AC48G9-AC48GS-AC48JB-AC48ST-AC5__G_-AC5__JB-SQ48G_-SQ48JB-

1” T-Bar2 9/16” T-Bar2 Slotted T-Bar2 Junction BoxStructure5” Non-Power Canopy3

5” Non-Power Canopy3

5” Square Canopy3

5” Square Canopy3

WallWA- Wall Mount

EDGELUMINOUS GEOMETRYTM

YEARWARRANTY

ConvertibleLED

ConvertibleLFL

LFL LED

YEARWARRANTY

ConvertibleLED

ConvertibleLFL

LFL LED

FINISH Standard powder-coat textured white, metallic silver, textured black or bronze painted finish, consult factory for chip of standard paint finishes. Pendants and canopies painted white unless specified differently in the options section of the part number. Contact factory for additional ustom color and finish options.

CIRCUITING

DUST GUARD

ORDERING INFORMATION: Specify Dust Guard (DG) in the options section of the part number. Sample Catalog #: EX2B-A-O-T5-1-1-24-AC48G1-120-1C-W-DG.

Consult factory for emergency circuit (E) and battery pack (B) applications as detailed shop drawings are required.

1C = All lamps on 1 circuit.1

2C = Top and bottom lamps are on separate circuits.2

1C = All lamps on 1 circuit.1

2C = Top and bottom lamps are on separate circuits.2

11D= All lamps on 1 dimmed circuit22D = Top and bottom lamps are on separate dimmed circuits

11D= All lamps on 1 dimmed circuit22D = Top and bottom lamps are on separate dimmed circuits

Consult factory for emergency circuit (E) and battery pack (B) applications as detailed shop drawings are required.

11D= All lamps on 1 dimmed circuit22D = Top and bottom lamps are on separate dimmed circuits

Consult factory for emergency circuit (E) and battery pack (B) applications as detailed shop drawings are required.

1C = All lamps on 1 circuit.1

2C = Top and bottom lamps are on separate circuits.2

11D= All lamps on 1 dimmed circuit22D = Top and bottom lamps are on separate dimmed circuits

Consult factory for emergency circuit (E) and battery pack (B) applications as detailed shop drawings are required.

1C = All lamps on 1 circuit.1

2C = Top and bottom lamps are on separate circuits.2

11D= All lamps on 1 dimmed circuit22D = Top and bottom lamps are on separate dimmed circuits

Consult factory for emergency circuit (E) and battery pack (B) applications as detailed shop drawings are required.

1C = All lamps on 1 circuit.1

2C = Top and bottom lamps are on separate circuits.2

APPLICATION: Dust Guard prevents particle ingress.

CONSTRUCTION: Clear acrylic lens lays on top of fixture and is easily removed for lamp replacement.

Test # 203117Part # EX2B-A-WO-T5-1-1Total Luminaire Efficiency: 79%

1255941

628

314

Test # 203116Part # EX2B-A-O-T5HO-1-1-SRTotal Luminaire Efficiency: 80.1%

760570

380

190

Test # 203118Part # EX2B-A-WO-T5HO-1-1Total Luminaire Efficiency: 79.6%

1295971

648

324

Test # 203114Part # EX2B-A-O-T5-1-1-SRTotal Luminaire Efficiency: 79.5%

723

543

382

181

NON-ILLUMINATED CONNECTOR

Illuminated Connector (CN) in the options section of the part number. Sample Catalog #: EX2B-A-O-T5-1-1-24-AC48G1-120-1C-W-CN.

INSTALLATION: Non-illuminated connector easily joins to linear fixtures using standard Pinnacle Lighting joiner kits.

APPLICATION: Utilize non-illuminated con-nectors to create unique configurations.

ORDERING INFORMATION: Specify Non-

P H O T O M E T R I C S E D G E E X 2 B _ A

INDIVIDUAL MODULES 1

Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.

Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239 Phone 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com© 2014 Pinnacle Architectural Lighting® June 2014

4'

8'

(1) lens per 4' housing

(1) lenses per 8' housing

4'

8'

Lamp Type (Direct) Lamp Type (Indirect)

4'

8'

4'

8'

48.0"1

96.0"1

1Add 1/16" for each end plate or 1/8" to the overall length of the row.

4'

8'

4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO

1Add 1/16" for each end plate or 1/8" to the overall length of the row.

4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO

4'

8'

48.0"1

1Add 1/16" for each end plate or 1/8" to the overall length of the row.

1Add 1/16" for each end plate or 1/8" to the overall length of the row.

1Add 1/16" for each end plate or 1/8" to the overall length of the row.

1Add 1/16" for each end plate or 1/8" to the overall length of the row.

4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO

96.0"1

48.0"1

96.0"1

48.0"1

96.0"1

(1) louver per 4' housing

(2) louvers per 8' housing

(1) lens per 4' housing

(1) lenses per 8' housing

48.0"1

96.0"1

4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO

48.0"1

96.0"1(1) louver per 4' housing

(2) louvers per 8' housing

Lamp Type (Direct) Lamp Type (Indirect)

4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO

(1) lens per 4' housing

(1) lenses per 8' housing

4' 1 - 28W 1 - 54W 8' 2 - 28W 2 - 54W

T5 T5HO

MOUNTING OPTIONS

1/2"

WA - Wall Mount(EX2B-A-O)

ADA Compliant

WA - Wall Mount(EX2B-A-WO)

ADA Compliant

Reflector located on wall side

AC - Aircraft Cable

1/2"

WA - Wall Mount(EX2B-P-O)

ADA Compliant

WA - Wall Mount(EX2B-P-WO)

ADA Compliant

Reflector located on wall side

AC - Aircraft Cable

1/2"

WA - Wall MountAC - Aircraft Cable

ADA Compliant

1/2"

WA - Wall Mount(EX2-N-O)

ADA Compliant

WA - Wall Mount(EX2-N-WO)

ADA Compliant

Reflector located on wall side

AC - Aircraft Cable

1/2"

WA - Wall MountAC - Aircraft Cable

ADA Compliant

1/2"

WA - Wall MountAC - Aircraft Cable

ADA Compliant