ectp e2 ba-eota_presentation_final_pds
DESCRIPTION
It is essencial to safeguard the value and current recognition of the CE marking by implementing the CPR in a way that the identification of construction products are characterized by the declared performance based on a harmonized technical assessment being the result of national consent.TRANSCRIPT
ECTP Conference – June, 18th 2014 1
ECTP Conference -‐ June, 18th 2014 2
3 ECTP Conference -‐ June, 18th 2014
4 ECTP Conference -‐ June, 18th 2014
5 ECTP Conference -‐ June, 18th 2014
Simplified procedures (A
rt. 36 to 38)
hEN
Market
Declaration of Performance CE marking
Regulation (EU) No 305/2011 (of 9 March 2011)
Regulation (EC) No 764/2008 (of 9 July 2008)
Mutual R
ecognition of N
ational Technical Docum
ent
ET Assessm
ent
6 ECTP Conference -‐ June, 18th 2014
Declara>on of Performance CPR BRCW ID
Mandate to CEN
Request for ETA
hEN
EAD
ETA
Nota: ETAG Published before 1st July 2013 may be used as EAD
The European Assessment Document (EAD): - developed and adopted by the organization of TABs: EOTA, - support the assessment of product(s) and serve the issue of European Technical Assessment (ETA).
CPR: Regulation (EU) No 305/2011 - BRCW: Basic Requirements for Construction Works - ID: Interpretative documents CEN: Comité Européen de Normalisation - hEN: European harmonized Standard - EAD: European Assessment Document - ETA: European Technical Assessment – TAB: Technical Assessment Body
7 ECTP Conference -‐ June, 18th 2014
ETA: Documented assessment of the performance of a product
• Granted by a TAB on the basis of a European Assessment Document (EAD) on a manufacturer’s request
Ø Defini>on of the product and its declared intended use(s) Ø Performances, expressed in level or class or by mean of a
descrip>on, of the essen>al characteris>cs agreed between the manufacturer and the TAB (technical assump>ons required to reach these performances)
Ø Technical details for the implementa>on of the system of assessment and verifica>on of the constancy of performance
[ No defined limit of validity ] 8 ECTP Conference -‐ June, 18th 2014
Direc1ve + na1onal transposi1on Regula1on
ETA => Fitness for use All the relevant characteris>cs
ETA => Performance of the essen>al characteris>cs agreed for the intended use
ETAG or CUAP => all the relevant characteris>cs for the intended use
EAD => agreed relevant essen>al characteris>cs for the intended use (Art. 4.2: Communica>on of declared ess. caract. only)
Possible objec>on on ETA (art.5.1) Possible objec>on on EAD but not on ETA
CE interven>on on the content of an EAD (competence/responsibility)
ETA => 5years validity ETA => no defined limit of validity
9 ECTP Conference -‐ June, 18th 2014
AVCP tasks
Regulation (EU) No 305/2011 (of 9 March 2011)
EAD (European Assessment Document)
Declaration of performance
CE marking
Test report
Calcul. report
Simul. report
Experience
Cla
ims
of
man
ufac
ture
r
Instructions and safety information (article 11.6)
ET-Assessment
10 ECTP Conference -‐ June, 18th 2014
EOTA Added Value
11 ECTP Conference -‐ June, 18th 2014
EOTA Developments
12 ECTP Conference -‐ June, 18th 2014
EOTA Statutes of 11 June 2013
EOTA Internal Regulations
EOTA Model for ETA Application
EOTA Recommendations for Key elements of
Service Agreement
National rules Technical requirements
EOTA GD 07 on How to write an ETA
Regulation (EU) 1062/2013 on ETA format
EOTA GD 06 on How to write an EAD
EOTA GD on ETA process Step-by-step
EOTA GD 05 on Work Programme
EOTA Quality &
Consistency of ETA
Regulation (EU) 305/2011 - CPR -
EOTA Layout model for ETA
EOTA GDs for EAD Consultations and
Handling of ETA/EAD
Financial restraints
Delegated Acts
National rules Administrative rules
EOTA CMS*
*) Consistency Management System
EC + MS Prov I de for f rame
Organisation
Working in a Cloud - Network environment
13 ECTP Conference -‐ June, 18th 2014
q Preliminary exchange phase between the manufacturer and the TAB: • Preparing the request • Answering the manufacturer’s request • Understanding and agreeing on the request
q Contract agreement for the request q Introduc>on of the Technical Dossier for the ETA q Preliminary instruc>on phase and Registra>on of the Technical
Dossier for the ETA q Development of a relevant EAD, where necessary q Assessing the product and Gran>ng the ETA on the basis of the EAD
14 ECTP Conference -‐ June, 18th 2014
ETA based on exis1ng EAD
• New development • Cita>on and informa>on
from TABs to member states permieng no>fica>on
ETA needing development of an EAD ETA process
15 ECTP Conference -‐ June, 18th 2014
ETA = technical specifica>on suppor>ng the declara>on of performance and CE marking of a product
16 ECTP Conference -‐ June, 18th 2014
EOTA
Interna>onal non for Profit Organisa>on (a.i.s.b.l)
Thank you for your ahen>on!
Peter D. Schellinck, Secretary General
Kunstlaan 40 Avenue des Arts, 1040 Brussels
Tel 0032 2 502 69 00 -‐ [email protected] – www.eota.eu
17 ECTP Conference -‐ June, 18th 2014