easy to use bundled software · the software includes functions, such as gradation settings, etc....
TRANSCRIPT
The world imagines... Mimaki delivers
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M WSGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
Integrated inkjet printer & cutter . . .
Mimaki Europe B.V. Stammerdijk 7E, 1112 AA Diemen, The Netherlands Tel: +31 (0)20 4627640
www.mimakieurope.com [email protected] @MimakiEurope
Easy to use bundled software Three different software packages are included as standard. From RIP to cutting, the software answers all professional requirements for multiple applications.
In addition, easy to operate software for preparing the print & cut data is enclosed.
RasterLink Pro5 SG RaterLink Pro5 SG combines cutting data with printing data created by Illustrator. Image data and cutting data can be output to RIP in the same way FineCut outputs to a plotter. New RasterLink Pro5 SG is equipped with 16 bit rendering which features the elimination of tone jump, fine colour reproduction, smoother gradation and white ink overlay printing.
Fine Cut 8 for IllustratorPlug-in cutting software for Illustrator. Highly sophisticated requirements, such as contour cutting are enabled. Furthermore tiling/nesting as well as large images can be accommodated.
Simple StudioNo previous experience with Illustrator is required to create vivid and creative stickers. Cut lines in (bleed) or around the printed image are automatically generated by using the image data. The software includes functions, such as gradation settings, etc.
Specifications Options
Item CJV30-60 CJV30-100 CJV30-130 CJV30-160
Maximum print/cut width 610 mm (24.0”) 1020 mm (40.1”) 1361 mm (53.5”) 1610 mm (63.3”)
Print resolution 540 dpi, 720 dpi, 1440 dpi
Printing modes (scan x feed)
540 x 720 dpi, 540 x 900 dpi, 540 x 1080 dpi, 720 x 540 dpi, 720 x 720 dpi,
720 x 1080 dpi, 720 x 1440 dpi, 1440 x 1440 dpi
Ink
Type Solvent ink: SS21 ink, ES3 ink
Max. capacity
4-colour mode: 440 cc x 2 = 880 cc per colour
6-colour mode: 440 cc x 1 = 440 cc per colour
Media
Width 620 mm (24.4”) 1030 mm (40,1”) 1371 mm (53.9”) 1620 mm (63.7”)
Thickness Less than 1.0 mm
Roll weight Less than 25 kg (55 Ibs.)
Roll diameter Inside: 2 inch, 3 inch I Outside: Less than ø 180 mm (7.1”)
Maximum cutting speed 30 cm:11.8”/s (42 cm:16.5”/s at the angle of 45º)
Cutting force 10-350g
Applicable tools Cutter, Water based ball-point pen, Oil based ball-point pen
Media cutting Cutting in Y direction by cutter on the head
Media heater Pre/print/post heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Command MRL-III,MGL-lIc2
Interface USB 2.0
Applicable standardVCCI class A, FCC class A, UL60950, CE Marking
(EMC directive, low voltage direclive), CB Report
Power AC100V-240V, Less than 1380VA
Operating environment 20ºC -35ºC, 35-65% Rh (No condensation)
Dimensions (WxDxH)1524 x 739 x 1424 mm
(60”x 29.1” x 56.0”)1934 x 739 x 1424 mm (76.1”x 29.1” x 56.0”)
2289 x 739 x 1424 mm(90.1”x 29.1”x 56.0”)
2538 x 739 x 1424 mm(99.9”x 29.1”x 56.0”)
Weight (max.) 110 kg (242 Ibs.) 130 kg (286 Ibs.) 145 kg (319 Ibs.) 160 kg (352 Ibs.)
Item CJV30-60 CJV30-100 CJV30-130 CJV30-160
Drying and exhaust unit * OPT-J0177 OPT-J0176 OPT-J0129 OPT-J0130
Static cling prevention net* OPT-J0187 OPT-J0186 OPT-J0139 OPT-J0140
Front cover ** OPT-J0185 OPT-J0184 OPT-0183 OPT-J0182
Sheet basket * OPT-J0191 OPT-J-190 OPT-J0189 OPT-J0188
* 60/100/130/160 **C60/C100/C130/C160Supplies
SS21 solvent ink 440cc SPC-0501 (Y/M/C/K/Lm /Lc)
White ink (SS21) 220cc SPC-0504W
ES3 eco solvent ink 440cc SPC-0440 (Y/M/C/K/Lm/Lc)
White / Silver ink (ES3) 220cc SPC-0443 (W/Si)
Wiper kit 33S 10 pcs SPA-0134
Waste ink bottle 2L 1 pc SPA-0117
Cutter blade assy 1 pc SPA-0107
MS cleaning cartridge 220cc SPC-0294
Cutter holder (standard accessory) 1 pc SPA-0001
Cutter holder 1 pc SPA-0090
Standard blade for vinyl 3 pcs SPB-0030
Blade for vinyl and paper 3 pcs SPB-0001
Blade for small character 3 pcs SPB-0003
Blade for refleclive sheet 2 pcs SPB-0006
Blade for fluorescent type vinyl 3 pcs SPB-0007
SS21 ink This fast drying solvent ink enables immediate cutting after printing. Of course, the ink will not peel off during the cutting process.
ES3 inkVirtually odourless and user-friendly ink that does not require any special ventilation.
White ink (SS21 ink)Mimaki’s exclusive “white ink overlay print” allows for simultaneous white and full colour printing and creates a beautiful finish with accurate overlay.
Metallic inka range of bright metallic ink colours provide sparkling results in your finished print
CJV30-160 equipped with a drying and exhaust unit
Print and Cut Combo : JV33 and CGFXII Series
Create true and efficient print and cut workflow
by combining Mimaki’s award winning JV33
Series with CGFXII cutting plotters.
• Some of the samples in this folder are artificial renderings • Specifications, design and dimensions stated in this folder may be subject to change without notice (for technical improvements, etc.) • The corporate and merchandise names written on this folder are the trademark of the respective corporations • Inkjet printers print using extreme fine dots, so colours may vary after replacement
of the printing heads, also note that if using multiple printer units, colours could vary slightly from one unit to other unit due to slight individual differences • Compositor’s errors reserved
create ...
62cm2 /24.4”
103cm2 /40.5”
137.1cm2 /53.9”
162cm2 / 63.7”
KEY TECHNICAL FEATURES • • •
Unique range of integrated print and cut solutionsMimaki has further expanded its award winning sign and graphics systems with the CJV30 range of unique integrated print and cut solutions – with 4 print widths available, providing even greater flexibility for end-users from retailers and copy shops to professional signmakers and print service providers.
Create ... Stickers, Seals, Labels, Posters, Promotional prints, PoS displays, Vehicle graphics, Signage, Banners, Backlit graphics, Window vinyls & much more...
CJV30 range delivers • • •
• 4differentprintwidths(60cm,100cm,130cm&160cm) provide greater flexibility and productivity
• Vibrant,longlastingprints
• IndoorandOutdoordurableprintquality
• BrightWhiteInk
• SparklingMetallicInk
• Ultralow-odour&fast-dryinginks
• Print&Cuttothebroadestrangeofmaterialsinitsclass
• UniqueDieCuttingfeature
• Accuratecontourcuttingfacility
• Fullyunattendedprint&cut
• Upto1,440dpiprintquality
• Upto17.5m2 /hour print speed
ENGINEERING EXCELLENCEAND CREATIVE INNOVATION
Founded in Japan in 1975, Mimaki Engineering has
steadily grown by reputation and influence into a
global company with large operational bases in Asia
and the Pacific, United States and Europe.
Renowned for award-winning performance, peerless
build quality and innovative technology, Mimaki has
established itself as a leading manufacturer of
wide-format inkjet printers and cutting machines
for the sign and graphics, textile and apparel and
industrial markets. In addition, Mimaki also provides
a comprehensive range of supporting products;
hardware, software and associated consumable
items, such as inks and cutting blades.
From outdoor signage and billboards to interior
decoration and furnishing, from packaging and
labels to promotional gifts and apparel, Mimaki
is committed to developing technology that sets
new industry standards, producing machines and
products that turn the imagination of our customers
into breath-taking reality.
• • • Mimaki delivers
SOLVENT
17.3 M2/H MAX SPEED
1440 DPI
UNATTENDED CONTINUOUS PRINTING
4 SIZES AVAILABLE
11.7 M2/H STANDARD
SILVER INK OPTION FOR METALLIC EFFECTS
4 / 6 COLOUR + WHITE
SS21 Solvent inkSS21 fast drying solvent ink enables immediate cutting after printing and eliminates peeling when cut.
Brilliant full colour printing with White InkMimaki’s unique white ink overlay feature enables simultaneous printing of colours and white ink.Even more vivid images are possible by overlaying white ink on the substrate especially when printing on transparent media.
High definition vivid imagesPrint capability up to 1440 dpi with three different dot sizes, producing smooth and beautiful images without ‘graining’, even in 4 colour mode.
Continuous unattended operationThe unique Uninterrupted Ink Supply System (UISS) automatically switches to another cartridge when supply runs out, allowing overnight continuous operation. Ink cartridges can also be replaced during operation.
Automatic Media Clamp functionThe number of pinch rollers and clamp pressures can be set from the RIP software, with pressure automatically adjusted to suit individual media thickness, allowing unattended operation and providing high quality finishing of both print and cut.
Accurate Contour CuttingContinuous crop mark detection feature recognises registration marks, ensuring greater accuracy of contour cutting.
Designatedimage
High Speed / fast deliveryUp to 17.5 m2/h (540 x 720 dpi, 4 colours) print speed capability.Symmetrical ink cartridge arrangement enables reliable & detailed high quality image generation, even with bi-directional printing.
Half-Cut functionThis function creates a series of half and die cuts leaving a few minimal connection points preventing the image from falling out when printing stickers etc.
Conventional dotsUniform dot sizes
Variable dotsThree different ink dot sizes can be used
Small Middle Large
Print speed CJV30-160 6 colours
540 x 7208 pass540 x 108012 pass
Print speed 4 colours
540 x 7204 pass540 x 10806 pass
1 2 3 4 5 6 7 8 9
9.0
6.1
2 4 6 8 10 12 14 16 18
17.5
11.9
the power to
ES3 Eco-Solvent inkVirtually odourless and user-friendly ink that does not require any special ventilation. Available in white and silver ink for producing more vivid colours and creating stunning metallic effects.
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M WSGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
UISS
When one ink cartridge runs out of ink, the indicator will light up red, while the system switches automatically to the second cartridge of the same colour.
The world imagines... Mimaki delivers
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M WSGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TATEXTILE &APPAREL
SOLVENTINK
SS21
ECO SOLVENTINK
ES3
METALLICINK
WHITEINK
M W
Integrated inkjet printer & cutter . . .
Mimaki Europe B.V. Stammerdijk 7E, 1112 AA Diemen, The Netherlands Tel: +31 (0)20 4627640
www.mimakieurope.com [email protected] @MimakiEurope
Easy to use bundled software Three different software packages are included as standard. From RIP to cutting, the software answers all professional requirements for multiple applications.
In addition, easy to operate software for preparing the print & cut data is enclosed.
RasterLink Pro5 SG RaterLink Pro5 SG combines cutting data with printing data created by Illustrator. Image data and cutting data can be output to RIP in the same way FineCut outputs to a plotter. New RasterLink Pro5 SG is equipped with 16 bit rendering which features the elimination of tone jump, fine colour reproduction, smoother gradation and white ink overlay printing.
Fine Cut 8 for IllustratorPlug-in cutting software for Illustrator. Highly sophisticated requirements, such as contour cutting are enabled. Furthermore tiling/nesting as well as large images can be accommodated.
Simple StudioNo previous experience with Illustrator is required to create vivid and creative stickers. Cut lines in (bleed) or around the printed image are automatically generated by using the image data. The software includes functions, such as gradation settings, etc.
Specifications Options
Item CJV30-60 CJV30-100 CJV30-130 CJV30-160
Maximum print/cut width 610 mm (24.0”) 1020 mm (40.1”) 1361 mm (53.5”) 1610 mm (63.3”)
Print resolution 540 dpi, 720 dpi, 1440 dpi
Printing modes (scan x feed)
540 x 720 dpi, 540 x 900 dpi, 540 x 1080 dpi, 720 x 540 dpi, 720 x 720 dpi,
720 x 1080 dpi, 720 x 1440 dpi, 1440 x 1440 dpi
Ink
Type Solvent ink: SS21 ink, ES3 ink
Max. capacity
4-colour mode: 440 cc x 2 = 880 cc per colour
6-colour mode: 440 cc x 1 = 440 cc per colour
Media
Width 620 mm (24.4”) 1030 mm (40,1”) 1371 mm (53.9”) 1620 mm (63.7”)
Thickness Less than 1.0 mm
Roll weight Less than 25 kg (55 Ibs.)
Roll diameter Inside: 2 inch, 3 inch I Outside: Less than ø 180 mm (7.1”)
Maximum cutting speed 30 cm:11.8”/s (42 cm:16.5”/s at the angle of 45º)
Cutting force 10-350g
Applicable tools Cutter, Water based ball-point pen, Oil based ball-point pen
Media cutting Cutting in Y direction by cutter on the head
Media heater Pre/print/post heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Command MRL-III,MGL-lIc2
Interface USB 2.0
Applicable standardVCCI class A, FCC class A, UL60950, CE Marking
(EMC directive, low voltage direclive), CB Report
Power AC100V-240V, Less than 1380VA
Operating environment 20ºC -35ºC, 35-65% Rh (No condensation)
Dimensions (WxDxH)1524 x 739 x 1424 mm
(60”x 29.1” x 56.0”)1934 x 739 x 1424 mm (76.1”x 29.1” x 56.0”)
2289 x 739 x 1424 mm(90.1”x 29.1”x 56.0”)
2538 x 739 x 1424 mm(99.9”x 29.1”x 56.0”)
Weight (max.) 110 kg (242 Ibs.) 130 kg (286 Ibs.) 145 kg (319 Ibs.) 160 kg (352 Ibs.)
Item CJV30-60 CJV30-100 CJV30-130 CJV30-160
Drying and exhaust unit * OPT-J0177 OPT-J0176 OPT-J0129 OPT-J0130
Static cling prevention net* OPT-J0187 OPT-J0186 OPT-J0139 OPT-J0140
Front cover ** OPT-J0185 OPT-J0184 OPT-0183 OPT-J0182
Sheet basket * OPT-J0191 OPT-J-190 OPT-J0189 OPT-J0188
* 60/100/130/160 **C60/C100/C130/C160Supplies
SS21 solvent ink 440cc SPC-0501 (Y/M/C/K/Lm /Lc)
White ink (SS21) 220cc SPC-0504W
ES3 eco solvent ink 440cc SPC-0440 (Y/M/C/K/Lm/Lc)
White / Silver ink (ES3) 220cc SPC-0443 (W/Si)
Wiper kit 33S 10 pcs SPA-0134
Waste ink bottle 2L 1 pc SPA-0117
Cutter blade assy 1 pc SPA-0107
MS cleaning cartridge 220cc SPC-0294
Cutter holder (standard accessory) 1 pc SPA-0001
Cutter holder 1 pc SPA-0090
Standard blade for vinyl 3 pcs SPB-0030
Blade for vinyl and paper 3 pcs SPB-0001
Blade for small character 3 pcs SPB-0003
Blade for refleclive sheet 2 pcs SPB-0006
Blade for fluorescent type vinyl 3 pcs SPB-0007
SS21 ink This fast drying solvent ink enables immediate cutting after printing. Of course, the ink will not peel off during the cutting process.
ES3 inkVirtually odourless and user-friendly ink that does not require any special ventilation.
White ink (SS21 ink)Mimaki’s exclusive “white ink overlay print” allows for simultaneous white and full colour printing and creates a beautiful finish with accurate overlay.
Metallic inka range of bright metallic ink colours provide sparkling results in your finished print
CJV30-160 equipped with a drying and exhaust unit
Print and Cut Combo : JV33 and CGFXII Series
Create true and efficient print and cut workflow
by combining Mimaki’s award winning JV33
Series with CGFXII cutting plotters.
• Some of the samples in this folder are artificial renderings • Specifications, design and dimensions stated in this folder may be subject to change without notice (for technical improvements, etc.) • The corporate and merchandise names written on this folder are the trademark of the respective corporations • Inkjet printers print using extreme fine dots, so colours may vary after replacement
of the printing heads, also note that if using multiple printer units, colours could vary slightly from one unit to other unit due to slight individual differences • Compositor’s errors reserved
Mimaki is exclusively distributed in the UK & Ireland by:Hybrid Services LtdNo 3, Gateway, Crewe, Cheshire. CW1 6YY01270 501 [email protected] @HybridServices
Authorised Hybrid Reseller: