easton 2004 charts
DESCRIPTION
Easton 2004 arrow chartTRANSCRIPT
LIGHTSPEED
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains
O.D. Inches
Size (3 Grains)
500400340
6.537.418.16
189215237
0.5000.4000.340
323⁄4 33331⁄4
131313
212121
100/80100/80100/80
9⁄329⁄329⁄32
A/C/C -60A/C/C -60A/C/C -60
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
EXCEL
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains
O.D. Inches
Size (3 Grains)
500400340
7.108.128.80
206235255
0.5000.4000.340
323⁄433331⁄4
131313
212121
100/80100/80100/80
9⁄329⁄329⁄32
A/C/C -60A/C/C -60A/C/C -60
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
Size
Shaft WeightShaft
Weight @ 29”
Spine @ 28” Span
Stock Length3
Conventional Nock Size4/9
UNI System5 Super UNI System5
NIBB Point
One-piece Bullet Point
RPS7 Insert Alum.
RPS Point SizeXX751 XX782 751/782 Bushing6 “G” Nock Bushing
Super Nock
3D Super Nock
Grains per Inch GrainsDeflection in
inches Inches Inches Grains Grains Grains Grains Grains Grains8 Grains Grains Inches171618131816
9.03 7.86 9.27
———
262228269
0.8800.8740.756
293030
1⁄41⁄41⁄4
788
777
———
———
———
60 56 63
68—74
101412
17/649/329/32
191319162013
8.34 10.05 9.01
———
242291261
0.7330.6230.610
3131321⁄2
9⁄329⁄329⁄32
99
—
77
—
——5
——13
——12
64 72 68
—82—
171621
5/165/165/16
201620182020
10.56 12.28 13.49
———
306356391
0.5310.4640.426
32321⁄233
9⁄325⁄165⁄16
———
———
44
—
1313—
1212—
80 89 64
90——
201917
5/165/165/16
211321142115
9.30 9.86 10.75
— 9.94
—
270286312
0.5400.5100.461
321⁄2321⁄233
5⁄165⁄165⁄16
—(11)(11)
—77
777
131313
121212
7810
78 83
100100100
252525
5/165/165/16
211722122213
12.02—
9.83
12.13 8.84 9.92
349256285
0.4000.5050.460
33321⁄2331⁄2
5⁄16—
5⁄16
—(13)(13)
—77
799
131313
121212
97 10211
88
100100100
253130
5/1611/3211/32
221522162219
10.67 12.02 13.77
10.77 12.13 13.89
309349399
0.4200.3750.337
333334
5⁄165⁄16
11⁄32
———
———
998
131313
121212
95 98 107
100100—
302926
11/3211/3211/32
231223142315
— 10.67 11.67
9.48 10.76 11.77
275309338
0.4230.3900.340
33331⁄234
—11⁄3211⁄32
(15)(14)—
77
—
111011
131313
121212
9911
——
100100100
373437
11/3211/3211/32
231724132419
13.26 10.40 14.55
13.38 10.50
—
385302422
0.2970.3650.268
3434341⁄2
11⁄3211⁄3211⁄32
—(17)—
—7
—
111212
131313
121212
— 110
—
100100100
374037
11/3211/3211/32
251225142613
— 11.33
—
10.28 11.43 11.49
298329333
0.3210.3050.265
341⁄2341⁄2341⁄2
—11⁄32—
(20)(18)(22)
777
151417
131313
121212
10811
——
100100150
524858
11/3211/32
3/8
— Indicates not available1 XX75 Mossy Oak New Break-Up, Realtree Hardwoods Green, Quattro, Yukon, Platinum Plus, Camo Hunter, GameGetter,
GameGetter II, Legacy.2 XX78 Super Slam Select, Super Slam.3 Length is approximate stock shaft length for each size.4 Nock size for conventional swaged nock taper.5 UNI—Universal Nock Installation System.6 Parenthesis indicates smaller size (“G” Nock). UNI Bushing is available as an accessory, except Super Slam Select.7 RPS = Replaceable Point System with 8-32 ATA -Standard thread
8 NIBB point grain weights are ±0.5 grain. All other components are ±1 grain.9 Legacy, GameGetter and GameGetter II, are produced without reduced diameter taper and can also use the next largest
conventional nock size.10 2113 shafts use 2114 X7/XX75 NIBB points and 2114-2117 components.11 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.
F.O.C. is Front-of-Center balance position on the arrow shaft.Note: Shaft sizes 1716, 1813 and 1816 use A/C/C -60; sizes 1913 and 1916 use A/C/C -71 Broadhead Adapter Rings.
AXIS
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
“X” Nock1
H.I.T. Insert2
RPS Point3
Broadhead Adapter
Ring4
Grains per inch Grains
Deflection in inches Inches Grains Grains Grains
500400
8.108.95
235260
0.5000.400
31311⁄2
99
1616
17⁄6417⁄649
-18Axis 400
1 “X” Nock comes loose in bag with nock installation tool.2 HIT inserts designed specifically for ST Axis. 3 Use ATA Standard RPS points. RPS Parabolic Target Points are available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
340300
9.5310.69
276310
0.3400.300
32321⁄2⁄2⁄
99
1616
9⁄9⁄9 32⁄32⁄9⁄9⁄9 32⁄32⁄
-39-49
SizeShaft
Weight
Shaft Weight @ 29”
Spine @ 28” Span
Stock Length
Point/ Insert Sizes
UNI1 System One-Piece Parabolic PointNIBB Point RPS Inserts4
RPS Point5
Broad- head
Adapter Ring6Bushing “G” Nock2
Medium Wt. Light Wt.
Extra Light Wt.
Hyper Light Wt. Two Piece
8-32 Halfout
8-32 Alum.
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains3 Grains3 Grains3 Grains3 Grains3 Grains3 Grains3 Grains
3L-183-18
3-493-60
7.477.82
8.839.45
217227
256274
0.6200.560
0.3900.340
3131
32321⁄2
-18-18
-49-60
33
67
77
77
100100
——
8282
100108
7070
8090
6060
7080
7070
8090
1616
——
——
911
17⁄6417⁄64
9⁄329⁄32
33
33
Sizes 2-00 through 3-04 are available for target. See page 35 for specifications.— Indicates not available.1 UNI—Universal Nock Installation System2 Easton “G” Nock is available in Opaque Black, White and Translucent Green, Orange and Red, and comes in .088"
and .098" string groove sizes.
3 NIBB Point grain weights are ±0.5 grains; all other components are ±1 grain.4 RPS = Replaceable Point System with 8-32 ATA Standard thread. 5 RPS Parabolic Target Points are available in 50-125 grains.6 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads. Adapter ring size matches point insert size.
3-283-39
8.118.58
235249
0.5000.440
311⁄2311⁄2
-28-39
45
77
100100
8785
7070
6060
7070
1822
——
17⁄17⁄17 64⁄64⁄9⁄9⁄9 32⁄32⁄
33
3-71 9.92 288 0.300 33 -71 8 7 — 114 90 80 90 — 14 5⁄5⁄5 16⁄16⁄ 3
SizeShaft
Weight
Shaft Weight @ 29”
Spine @ 28” Span
Stock Length
Super Nock1
CM Insert2
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains
O.D. Inches
Size (3 Grains)
460400340300
9.4510.2011.0411.64
274296320338
0.4600.4000.3400.300
311⁄232321⁄233
13131313
23232323
9⁄329⁄329⁄329⁄32
A/C/C -71A/C/C -71A/C/C -71A/C/C -71
1 Super Nock factory installed.2 CM Inserts designed specifically for camouflaged carbon and A/C arrows. Use ATA Standard 8-32 screw-in points. 3 Uses 9⁄32 ATA Standard Easton RPS points, field or blunt points. RPS points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
A/C KINETIC
A/C/C HUNTING
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains
O.D. Inches
Size (3 Grains)
500400
7.038.17
204237
0.5050.415
31311⁄2
1313
2121
100/80100/80
9⁄329⁄329
A/C/C -60A/C/C -60
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
340300
9.009.14
261265
0.3700.330
32321⁄2⁄2⁄
1313
2121
100/80100/80
9⁄9⁄9 32⁄32⁄9⁄9⁄9 32⁄32⁄
A/C/C -60A/C/C -60
C2 OBSESSION & HARDWOODS GREEN
SizeShaft
Weight
Shaft Weight @
29"Spine @ 28"
SpanStock
LengthSuper Nock1
CM Insert2
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains
O.D. Inches
Size (3 Grains)
500400
8.029.12
233264
0.5000.400
31311⁄2
1313
2323
9⁄329⁄32
A/C/C -71A/C/C -71
1 Super Nock factory installed.2 CM Inserts designed specifically for camouflaged carbon and A/C arrows. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS target points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
340300
10.0110.14
290294
0.3400.300
32321⁄2⁄2⁄
1313
2323
9⁄9⁄9 32⁄32⁄9⁄9⁄9 32⁄32⁄
A/C/C -71A/C/C -71
C2 EPIC
Group H
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"22152314211722163-49400410
0.4200.3900.4000.3750.3900.4000.410
SS, 75SS, 75SS, 75SS, 75A/C/C
CA, KINRdln
10.6710.6712.0212.028.83
CAWT7.60
309309348348256
CAWT220
COMPOUND BOW - Release AidCALCULATED PEAK BOW WEIGHT - Lbs.
CORRECT HUNTING ARROW LENGTH
RECURVE BOWFinger Release
ACTUAL PEAK BOW WEIGHT - Lbs.
MODERN LONGBOWFinger Release
ACTUAL PEAK BOW WEIGHT - Lbs.Medium Cam Single or Hard Cam Point Weight Point Weight Point Weight Point Weight
75(grains)65-85
100(grains)90-110
125(grains)115-135
150(grains)140-160
75(grains)65-85
100(grains)90-110
125(grains)115-135
150(grains)140-160
22.5
23"23.5
23.5
24"24.5
24.5
25"25.5
25.5
26"26.5
26.5
27"27.5
27.5
28"28.5
28.5
29"29.5
29.5
30"30.5
30.5
31"31.5
31.5
32"32.5
32.5
33"33.5
75(grains)65-85
100 (grains)90-110
125 (grains)115-135
150 (grains)140-160
75(grains)65-85
100(grains)90-110
125 (grains)115-135
150 (grains)140-160
A B B C C D E 41-46 38-43 35-40 32-37
A B B C C D E F 47-52 44-49 41-46 38-43
40-44 37-41 34-38 31-35 35-39 32-36 29-33 26-30 A B B C C D E F G H 35-39 32-36 29-33 26-30 53-58 50-55 47-52 44-49
45-49 42-46 39-43 36-40 40-44 37-41 34-38 31-35 A B B C C D E F G H I 40-44 37-41 34-38 31-35 59-64 56-61 53-58 50-55
50-54 47-51 44-48 41-45 45-49 42-46 39-43 36-40 B B C C D E F G H I J 45-49 42-46 39-43 36-40 65-70 62-67 59-64 56-61
55-59 52-56 49-53 46-50 50-54 47-51 44-48 41-45 B C C D E F G H I J J 50-54 47-51 44-48 41-45 71-76 68-73 65-70 62-67
60-64 57-61 54-58 51-55 55-59 52-56 49-53 46-50 C C D E F G H I J J K 55-59 52-56 49-53 46-50 77-82 74-79 71-76 68-73
65-69 62-66 59-63 56-60 60-64 57-61 54-58 51-55 C D E F G H I J J K L 60-64 57-61 54-58 51-55 83-88 80-85 77-82 74-79
70-75 67-72 64-69 61-66 65-69 62-66 59-63 56-60 D E F G H I J J K L L 65-69 62-66 59-63 56-60 89-94 86-91 83-88 80-85
76-81 73-78 70-75 67-72 70-75 67-72 64-69 61-66 E F G H I J J K L L L 70-75 67-72 64-69 61-66 95-100 92-97 89-94 86-91
82-87 79-84 76-81 73-78 76-81 73-78 70-75 67-72 F G H I J J K L L L 76-81 73-78 70-75 67-72 101-106 98-103 95-100 92-97
88-93 85-90 82-87 79-84 82-87 79-84 76-81 73-78 G H I J J K L L L 82-87 79-84 76-81 73-78 107-112 104-109 101-106 98-103
94-99 91-96 88-93 85-90 88-93 85-90 82-87 79-84 H I J J K L L L 88-93 85-90 82-87 79-84 113-118 110-115 107-112 104-109
Group A
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"18131716780
0.8740.8800.780
7575
Rdln
7.869.036.30
228262183
Group B
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"19131816690
0.7330.7560.690
7575
Rdln
8.349.276.27
242269182
Group C
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"201319163L-18600
0.6100.6230.6200.600
7575
A/C/CRdln
9.0110.057.476.92
261291217201
Group D
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"211320163-18500520
0.5400.5310.5600.5000.520
7575
A/C/CCA, KIN
Rdln
9.3010.567.82
CAWT7.09
270306227
CAWT206
Group E
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"22122114211520183-28
500, 460520
0.5050.5100.4610.4640.500
0.500, 0.4600.520
SSSS, 75
7575
A/C/CCA, KIN
Rdln
8.849.86
10.7512.288.11
CAWT7.09
256286312356235
CAWT206
Group G
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"23122215211720203-39400460
0.4230.4200.4000.4260.4400.4000.460
SSSS, 75SS, 75
75A/C/C
CA, KINRdln
9.4810.6712.0213.498.58
CAWT7.32
275309348391249
CAWT212
Group I
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"24132314231522163-49400410
0.3650.3900.3400.3750.3900.4000.410
SS, 75SS, 75SS, 75SS, 75A/C/C
CA, KINRdln
10.4010.6711.6712.028.83
CAWT7.60
302309338348256
CAWT220
Group J
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"25122413231522193-60340360
0.3210.3650.3400.3370.3400.3400.360
SSSS, 75SS, 75SS, 75A/C/C
CA, KINRdln
10.2810.4011.6713.779.45
CAWT8.31
298302338399274
CAWT241
Group K
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"2512251423173-71300
0.3210.3050.2970.3000.300
SSSS, 75SS, 75A/C/C
CA, KIN
10.2811.3313.389.92
CAWT
298329388288
CAWT
Group F
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"22122213211520183-28
500, 460520
0.5050.4600.4610.4640.500
0.500, 0.4600.520
SSSS, 75
7575
A/C/CCA, KIN
Rdln
8.849.83
10.7512.288.11
CAWT7.09
256285312356235
CAWT206
Group L
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"25142613231724193-71300
0.3050.2650.2970.2680.3000.300
SS, 75SS
SS, 7575
A/C/CCA, KIN
11.3311.4913.2614.559.92
CAWT
329333385422288
CAWT
Carbon & Kinetic Shaft Weights (CAWT)
Size Spine Kinetic ST AxisHardwoods
Green HD Obsession Epic LightSpeed ExcelGrs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29"
500460400340300
0.5000.4600.4000.3400.300
9.4510.2011.0411.64
274296320338
8.10
8.959.53
10.69
235
260276310
8.02
9.1210.0110.14
233
264290294
8.02
9.1210.0110.14
233
264290294
7.03
8.179.009.14
204
237261265
6.53
7.418.16
189
215237
7.10
8.128.80
206
235255
1. Determining Correct Hunting Arrow LengthBows with cut-out window. The Correct Hunting Arrow Length for bows with a broadhead cut-out sight window (including bows with overdraws) is determined by drawing back an extra-long arrow to full draw and having someone mark the arrow one to two inches in front of where the arrow contacts the most forward portion of the arrow rest.
Bows without cut-out window. The Correct Hunting Arrow Length for bows without a cut-out sight window (which will not allow a fixed blade broadhead to be drawn past the back of the bow) at full draw, mark an extra-long arrow one to two inches in front of the handle.
Bow Draw Length Draw length is measured at full draw from the bottom of the nock groove to the back (far side) of the bow. Actual arrow length and draw length are only the same if the end of the arrow shaft is even with the back of the bow (far side) at full draw.
2. Determining Actual Peak Bow Weight—Compound BowsCompound bows must be measured at the peak bow weight as the bow is being drawn and not while letting the bow down.
The suggested shaft sizes in the charts were determined using a “Standard” Setup which includes: • Use of a release aid. • Compound bow with brace height greater than 61⁄2".
If your setup differs from the “Standard” Setup, use the Variables (following) to make adjustments to determine the Calculated Peak Bow Weight so the correct arrow size can be selected on the Chart.
Variables to the “Standard” Setup for Compound Bows: • Finger release - Add 5 lbs. • Bows with brace heights less than 61⁄2" – Add 5 lbs.
Overdraw Compound BowsIf you are using an overdraw, make the variable calculations (if any), and then modify the Calculated Peak Bow Weight of your bow using the chart below.
Length of Overdraw
Bow Weight 1" 2" 3" 4" 5"
For 50#-70# Actual /Calculated Peak Bow Weight, 1# 3# 6# 9# 12#add to bow weight—
3. Determining Actual Peak Bow Weight—Recurve and Modern Longbows
Your local archery pro shop is the best place to determine the actual draw weight of your bow. Actual Peak Bow Weight for recurve bows should be measured at your draw length.
Correct Hunting Arrow Length
1"-2" clearance(minimum)
Place where arrow contacts most forward portion of the arrow rest.Mark arrow here.
Belly of bow (face side)Back of bow (far side)
Belly of bow (face side)
Back of bow (far side)
Bottom of nock groove.
Mark arrow here. Note: Correct arrow length is measured from throat (string hole) of the nock to end of the shaft, not including point or insert.
Correct Hunting Arrow Length1"-2" clearance(minimum)
Bottom of nock groove.
Size – indicates suggested arrow size.Spine – spine of arrow size shown (static). See page 9 for correct Epic spine.CAWT – Refer to Carbon & Kinetic box (left) for specific model and weight.Color Designation for Aluminum Arrows – Within each box the aluminum arrows are color-coded.
= lightest and fastest. = medium weight offering good speed and durability.
= heavier weights for excellent durability and penetration.
= aluminum/carbon and carbon.
Note: Shaft Weight at 29" is shown on our Arrow Selection Charts. To determine weight at your shaft length, multiply your actual shaft length by the grains-per-inch (gpi), not including point, insert or UNI Bushing.SS XX78 Super Slam Select and Super Slam (7178-T9 alloy)75 XX75: Platinum Plus, Legacy, Camo Hunter, GameGetter, GameGetter II (7075-T9 alloy), Quattro and YukonA/C/C Aluminum/Carbon/CompositeRdln RedlineCA ST Axis, Realtree Hardwoods Green HD, Mossy Oak Obsession, Epic, LightSpeed, ExcelKIN KineticSuggested shaft sizes were determined using 100-grain points. See “Variables” on left side of page.
USING THE HUNTING ARROW SELECTION CHART1. Once you have determined your Correct Hunting Arrow Length and Calculated or Actual Peak
Bow Weight, you are ready to select your correct shaft size:1.A Compound bows. In the “Calculated Peak Bow Weight” column (left-hand side of the CHART), select
the column with the type cam on your bow, then the column with the point weight you use. Then locate your Calculated Peak Bow Weight in that column.
1.B Recurve bows and Modern Longbows. In the “Actual Peak Bow Weight” column (right-hand side of the CHART), select the column with the bow type and then the point weight you use. Next, locate your Actual Peak Bow Weight in that column.
2. Move across that bow weight row horizontally to the column indicating your Correct Arrow Length. Note the letter in the box where your Calculated or Actual Peak Bow Weight row and
Correct Hunting Arrow Length column intersect. The “Shaft Size” box below the CHART with the same letter contains your recommended shaft sizes. Select a shaft from the CHART depending on the shaft material, shaft weight and type of shooting you will be doing. For larger game, you should use heavier shafts.
EASTON HUNTING ARROW SELECTION CHART
X10 PointsX10 Ballistic Tungsten
Break-offX10 Stainless Steel
Break-off
Grains Grains
100/110/120 90/100/110
X10 Pin Nock SystemX10 Pin Pin Nock
Grains Grains
8 2
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque Yellow.
A/C/E Insert and Point System 5-44 ThreadScrew-in Point Weight
#2-31gr. #3-36gr. #4-41gr. #5-46gr. #6-51gr.
Insert Weight Total Weight (grains)—Insert and Point
H - 39gr. 70 75 80 85 90
J - 49gr. 80 85 90 95 100
L - 59gr. 90 95 100 105 110
A/C/E Pin Nock System A/C/E NockA/C/E Pin Pin Nock “G” Nock
Grains Grains Grains
8 2 7
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque Yellow.“G” Nock Colors: Opaque Black, White and Translucent Green, Orange, Red.
A/C/E Points
One-piece Stainless Steel Break-off
Grains Grains
50 60/70/8080/90/100
100/110/120
X10
SizeShaft
Weight1
Shaft Weight @
29"Spine @ 28"
SpanStock
Length
Maximum Trim
Amount2
Recommended Point Weight
Range
Grains per Inch Grains
Deflection in Inches Inches Inches Grains
1000900830
600550500
5.275.756.16
7.027.477.80
153167179
204217226
1.0000.9000.830
0.6000.5500.500
2828 281⁄2
303132
No limitNo limitNo limit
4.53.54.0
90-10090-100 90-100
100-110100-110 100-110
1 Due to the pronounced barrel design of the X10, the grain weight-per-inch shown is an average weight-per-inch of a 29" shaft. Shaft weight is slightly heavier toward the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 6-7 grains.
2 Because of the pronounced barrel shape of the X10, Easton recommends that no more than these lengths be cut from the front of the shaft before point installation.
A/C/E
SizeShaft
Weight1
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Maximum Trim
Amount3
Recommended Point Weight
Range
Grains per Inch Grains
Deflection in Inches Inches Inches Grains
14002
12502
11002
780720670
470430400
4.865.085.14
6.016.355.93
6.817.037.50
141147149
174184172
197204218
1.4001.2501.100
0.7800.7200.670
0.4700.4300.400
265⁄8265⁄8285⁄8
5
295⁄8295⁄8305⁄8
5
325⁄8325⁄8325⁄8
No limitNo limitNo limit
No limit6.0
No limit
6.55.54.0
50-6060-7070-80
80-9080-9080-90
90-100100-110100-110
1 Due to the barrel design of the A/C/E, the grain weight-per-inch shown is an average weight-per-inch of a 29” shaft. Shaft weight is slightly heavier toward the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end weighs 5-6 grains.
2 Available as a special order only. Replaced with -00 sizes in the A/C/C shaft series.3 Because of the pronounced barrel shape of the A/C/E, Easton recommends that no more than these lengths be
cut from the front of the shaft before point installation.
1000920850
5.705.835.70
165169165
1.0000.9200.850
285⁄8⁄8⁄285⁄8⁄8⁄285⁄8⁄8⁄
No limit9.5
No limit
70-8070-8070-80
620570520
6.116.306.65
177183193
0.6200.5700.520
305⁄8⁄8⁄315⁄8⁄8⁄315⁄8⁄8⁄
No limit10.04.5
90-10090-10090-100
370 7.91 229 0.370 325⁄8⁄8⁄ 4.0 110-120
750700650
6.356.706.79
184194197
0.7500.7000.650
292929
3.53.53.5
90-100 90-100 90-100
450410380
8.108.488.87
235246257
0.4500.4100.380
331⁄2⁄2⁄333⁄4⁄4⁄333⁄4⁄4⁄
5.55.56.5
100-110 100-120100-120
Points
One-piece
Stainless Steel Break-off
(610-1000)
Navigator Stainless Steel Break-off(430-480-540)
Grains Grains Grains
5060/70/80
80/90/100100/110/120
100/110/120
A/C/E Insert and Point System 5-44 Thread (for use with Navigator sizes 610-1000)Point Weight #2-31gr. #3-36gr. #4-41gr. #5-46gr. #6-51gr.Insert Weight Total Weight (grains)—Insert and Point
H - 39gr. 70 75 80 85 90
J - 49gr. 80 85 90 95 100
L - 59gr. 90 95 100 105 110
A/C/E Pin Nock System A/C/E Nock
A/C/E or Navigator Pin1 Pin Nock “G” Nock
Grains Grains Grains8 2 7
1 430, 480, 540 sizes use unique Navigator nock pin. All others use A/C/E nock pin.
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque Yellow.“G” Nock Colors: Opaque Black, White and Translucent Green, Orange, Red.
A/C/C
SizeShaft
Weight
Shaft Weight @ 29”
Spine @ 28” Span
Stock Length
Point/ Insert Sizes
UNI1 System One-Piece Parabolic Point
NIBB Point
RPS Inserts
RPS Point4Bushing
“G” Nock2
Heavy Wt.
Med. Wt.
Light Wt.
Extra Light Wt.
Hyper Light Wt.
8-32 Halfout
8-32 Alum.
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains3 Grains3 Grains3 Grains3
O.D. Inches
2-003L-003-00
3L-043-04
3L-18
3-493-603-71
4.725.145.47
6.957.227.47
8.839.459.92
137149159
202209217
256274288
1.5001.3001.150
0.7500.6800.620
0.3900.3400.300
28281⁄2281⁄2
303031
32321⁄233
-00* -00* -00*
-04-04-18
-49-60-71
———
223
678
777
777
777
—*—*—*
100100—
———
50* 50* —*
8080
100
———
—* —* —*
707082
100108114
—* —* 50*
606070
809090
—* —* —*
505060
708080
———
——70
809090
———
——16
———
———
———
91114
———
——
17⁄64
9⁄9⁄9 329⁄325⁄16
—Indicates not available.* The A/C/C -00 sizes use the same size core tube as A/C/E shafts and can use all available
A/C/E points, inserts and nocks. 1 UNI–Universal Nock Installation System.
2 Easton “G” Nock is available in Opaque Black, White and Translucent Green, Orange, Red and comes in .088” and .098” string groove sizes.
3 NIBB Point grain weights are ±0.5 grains; all other points are ±1 grain.4 RPS Parabolic Target Points are available in 50-125 grains.
A/C NAVIGATOR
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Recommended Point Weight
RangeGrains per
Inch GrainsDeflection in Inches Inches Grains
1000880810
*480*430
5.135.505.80
7.988.42
149160168
231244
1.0000.8800.810
0.4800.430
29291⁄230
32321⁄2
70-8070-8080-90
100-110100-110
*Sizes use unique Navigator Point. All others use A/C/E Points.
710610
*540
6.296.877.39
182199214
0.7100.6100.540
301⁄2⁄2⁄31311⁄2⁄2⁄
80-9080-90
100
2L-042-04
3X-04
6.056.486.74
175188195
1.0200.9200.830
29291⁄2⁄2⁄291⁄2⁄2⁄
-04-04-04
222
777
100100100
808080
707070
606060
505050
———
———
———
———
3-183-283-39
7.828.118.58
227235249
0.5600.5000.440
31311⁄2⁄2⁄311⁄2⁄2⁄
-18-28-39
345
777
———
100100100
828785
707070
606060
707070
161822
———
17⁄17⁄17 64⁄64⁄17⁄17⁄17 64⁄64⁄9⁄9⁄9 32⁄32⁄9
FATBOY LIGHTSPEED
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
Super1 UNI
BushingRPS2
Insert
One-piece Point
RPS Point3
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains Grains O.D. Inches
500400340
7.107.758.30
206225241
0.5000.4000.340
323⁄433331⁄4
131313
999
383838
80/10080/10080/100
11⁄3211⁄3211⁄32
1 Super UNI factory installed.2 RPS insert designed specifically for Fat Boy. Use ATA Standard 8-32 screw-in points.3 Uses 11/32 ATA Standard Easton RPS, field or blunt points.
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains O.D. Inches
500400340
6.537.418.16
189215237
0.5000.4000.340
323⁄4 33331⁄4
131313
212121
80/10080/10080/100
9⁄329⁄329⁄32
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Can use 9/32 ATA Standard Easton RPS points, field or blunt points.
VECTOR
REDLINE
SizeShaft
Weight
Shaft Weight @ 29”
Spine @ 28” Span
Stock Length
Point/ Insert Sizes
UNI1 System One-Piece Parabolic Point
NIBB Point
RPS Inserts3
RPS Point4
RedlineBushing “G” Nock2 Heavy Wt. Med. Wt. Light Wt.
Extra Light Wt.
Hyper Light Wt.
8-32 Halfout 8-32 Alum.
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains5 Grains5 Grains5 Grains5 Grains5 Grains5 Grains Grains O.D. Inches
1000900780
5.685.836.30
165169183
1.0000.9000.780
291⁄2291⁄230
-04-04-18
223
777
100100—
8080
100
707082
606070
505060
——70
——16
———
——
17⁄64690600520
6.276.927.09
182201206
0.6900.6000.520
301⁄231311⁄2
-18-28-49
346
777
———
100100—
8287
100
707080
606070
707080
1618—
——9
17⁄64 17⁄64 9⁄32
460410360
7.327.608.31
212220241
0.4600.4100.360
311⁄23232
-49-60-60
677
777
———
———
100108108
809090
708080
809090
———
91111
9⁄329⁄329⁄32
—Indicates not available.1 UNI–Universal Nock Installation System.2 Easton “G” Nock is available in Opaque Black, White and Translucent Green, Orange, Red and comes in .088” and .098”
string groove sizes.
3 RPS=Replaceable Point System with 8-32 ATA-Standard thread. 4 RPS Parabolic Target Points are available in 50-125 grains.5 NIBB Point grain weights are ±0.5 grains; all other points are ±1 grain.
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Recommended Point Weight
Range
Stainless Steel
Break-off Point
Pin NocksVector
Pin Pin
Nock
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains Grains
1050920840
5.245.446.06
152158176
1.0500.9200.840
28281⁄4281⁄2
70-8070-8080-90
70/80/9070/80/90
80/90/100
777
222
770700640
6.266.386.87
182185199
0.7700.7000.640
291⁄2301⁄2303⁄4
80-90 80-90
90-100
80/90/100 80/90/100
90/100/110
778
222
580530480
7.067.567.78
205219226
0.5800.5300.480
311⁄2313⁄432
90-10090-100
100-110
90/100/11090/100/11090/100/110
888
222
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque White.
Size
Shaft WeightShaft
Weight @ 29"
Spine @ 28" Span
Stock Length3
Conventional Nock Size4/8
UNI System5 Super UNI System5
NIBB Point
One-piece Bullet Point
RPS7 Insert Alum.
RPS Point SizeXX751 X72 751 X72 Bushing9 “G” Nock Bushing
Super Nock
3D Super Nock
Grains per Inch GrainsDeflection in
Inches Inches Inches Inches Grains Grains Grains Grains Grains Grains6 Grains6 Grains6 Grains121414131416
161216141616
1716181218131814
191319141916
201621122114
221423122314
25122613
5.93 5.94 7.15
——
8.36
9.03—
7.86
8.34—
10.05
10.56—
9.86
——
10.67
——
———
6.27 7.73
—
— 7.30
—8.57
— 9.28
—
— 8.42 9.94
10.41 9.48 10.76
10.28 11.49
172172207
182224242
262212228249
242269291
306244286
302275309
298333
2.5012.0361.684
1.2981.1531.079
0.8800.8790.8740.799
0.7330.6580.623
0.5310.5900.510
0.4250.4230.390
0.3210.265
262627
——281⁄2
29—30
31—31
32—321⁄2
——331⁄2
341⁄2—
———
2828—
1
—291⁄2—291⁄
—301⁄2—
1
—311⁄2321⁄2
3333331⁄2
341⁄2341⁄2
—7⁄327⁄32
——1⁄4
1⁄4—1⁄4
9⁄32—9⁄32
9⁄32—5⁄165
——
11⁄32 11
——
——2
655
7988
999
(10)
—(10)(11)(11)
(13)(15)(14)
(20)(22)
7—7
777
7777
777
—77
777
77
———
———
———
———
477
91110
1517
———
———
———
———
131313
131313
1313
———
———
———
———
121212
121212
1212
— — 46
10
55 10
51 56
10
60 67 10
5660
64 64 72
10
80 88 10
78
103 10
99 10
—
108 10
—
453552
——63
68——
——82
90100100
100100100
100150
———
———
10—14
17—16
202525
—3734
5258
———
———
17/64—
9/32
5/16—
5/165/16
5/165/165/165/16
—11/3211/3211/32
11/323/8
— Indicates not available1 XX75 Jazz, Platinum Plus.2 X7 Eclipse and Cobalt.3 Length is approximate stock shaft length for each size.4 Nock size for conventional swaged nock taper.5 UNI—Universal Nock Installation System.6 NIBB point grain weights are ±0.5 grain. All other components are ±1 grain.
7 RPS = Replaceable Point System with 8-32 ATA-Standard thread.8 Jazz is produced without reduced diameter taper and can also use the next largest conventional nock size.9 Parenthesis indicates smaller (A/C/E Nock) UNI Bushing size is available as an accessory.
Except X7 Cobalt.10 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.
F.O.C. is Front-of-Center balance position on the arrow shaft.
151215141516
——
7.34
5.846.83—
169198213
1.5531.3791.403
——271⁄2⁄2⁄
2726—
——1⁄4⁄4⁄
553
777
———
———
———
4910
6110
48
——54
———
———
171217131714
—7.42—
6.70—8.07
194215234
1.0991.0440.963
—29—
281⁄2⁄2⁄—29
—1⁄4⁄4⁄—
777
777
———
———
———
6210
5456
———
———
———
181418161912
—9.27—
8.57—7.60
249269220
0.7990.7560.778
—30—
291⁄2⁄2⁄—30
—1⁄4⁄4⁄—9
889
777
———
———
———
60637010
—74—
—12—
—9/32—
201220132014
—9.01—
8.00—9.56
232261277
0.6800.6100.579
—321⁄2⁄2⁄—
311⁄2⁄2⁄—311⁄2⁄2⁄
—9⁄9⁄9 32⁄32⁄—
(10)—(10)
7—7
555
131313
121212
8310
6871
———
2221—
5/165/16—
211522122213
10.75—
9.83
—8.849.92
312256285
0.4610.5050.460
33—331⁄2⁄2⁄
—321⁄2⁄2⁄331⁄2⁄2⁄
5⁄16—5⁄16
(11)(13)(13)
777
799
131313
121212
8310210
88
100100100
253130
5/1611/3211/32
231524122413
11.67—
10.40
11.779.65
10.50
338280302
0.3420.4000.365
34—34
1
343434
11⁄32⁄32⁄11⁄32⁄32⁄11⁄32⁄32⁄
—(17)(17)
—77
111212
131313
121212
—110110
100100100
374040
11/3211/3211/32
1. Determining Correct Target Arrow Length The Correct Arrow Length for any type bow (including bows with overdraws) is determined
by drawing an extra-long arrow to full draw and having someone mark the arrow one inch in front of where the arrow contacts the most forward portion of the arrow rest. You may also use an arrow-length check arrow from Easton.
2. Determining Actual Peak Bow Weight for Compound BowsCompound bows must be measured at the peak bow weight as the bow is being drawn and not while letting the bow down.
The suggested shaft sizes in the charts were determined using a “Standard” Setup which includes:
• Use of a release aid. • Recommended or 75-100 grain arrow point weight. • Compound bow with brace height greater than 61⁄2”.
If your setup differs from the “Standard” Setup, use the Variables (following) to make adjustments to determine the Calculated Peak Bow Weight so the correct arrow size can be selected on the Chart.
Variables to the “Standard” Setup for Compound Bows:
• Finger release - Add 5 lbs. • Point weight over 100 grains – Add 3 lbs. for each 25 grains heavier than 100 grains. • Bows with brace heights less than 61⁄2” – Add 5 lbs.
Overdraw Compound BowsIf you are using an overdraw, make the variable calculations (if any), and then modify the Calculated Peak Bow Weight of your bow using the following chart. Length of Overdraw
Bow Weight 1” 2” 3” 4” 5”
For 50#-70# Actual /Calculated Peak Bow Weight, 1# 3# 6# 9# 12#add to bow weight—
3. Determining Actual Peak Bow Weight for Recurve BowsYour local archery pro shop is the best place to determine the actual draw weight of your bow. Actual Peak Bow Weight for recurve bows should be measured at your draw length.
Bow Draw LengthDraw length is measured at full draw from the “back” (far side-see drawing) of the bow to the bottom of the nock groove. Actual arrow length and draw length are only the same if the end of the arrow shaft is even with the back of the bow at full draw.
Correct Target Arrow Length
Correct Target Arrow Length
1” clearance (minimum)
Mark arrow here. Bottom of nock groove.
Place where arrow contacts most forward portion of the arrow rest.
Belly of bow (face side)Back of bow (far side)
Note: Correct arrow length is measured from throat (string hole) of the nock to end of the shaft, not including point or insert.
* When two sizes are listed together, the weight listed is for the first shaft.
Group T4
Size Spine Model Weight
Grs/InchWeight
@29"*670•720R*650•700R*610•710R
3L-043-04
*700•770R690
1912201219131914
0.670•0.7200.650•0.7000.610•0.710
0.7500.680
0.700•0.7700.6900.7780.6800.7330.658
A/C/EX10Nav
A/C/CA/C/C VectorRdlnX7X775X7
5.936.796.876.957.226.386.277.608.008.349.28
172197199202209 185182220232242269
Group T5
Size Spine Model Weight
Grs/InchWt
@29"*620•670R*600•650R*540•610R
3-04
*640•700R690
2012201319141916
0.620•0.6700.600•0.6500.540•0.610
0.680
0.640•0.7000.690
0.6800.6100.6580.623
A/C/EX10Nav
A/C/C
VectorRdln
X775X775
6.117.027.397.22
6.266.27
8.009.019.28
10.05
177204214209
182182
232261269291
Group T6
Size Spine Model Weight
Grs/InchWeight
@29"*570•620R*550•600R*540•610R
3L-18
*580•640R600500500
2112201320141916
0.570•0.6200.550•0.6000.540•0.610
0.620
0.580•0.6400.6000.5000.5000.5900.6100.5790.623
A/C/EX10Nav
A/C/C
VectorRdlnLSpd
FBX775X775
6.307.477.397.47
7.066.926.537.108.429.019.56
10.05
183217214217
205201189206244261277291
Group T7
Size Spine Model Weight
Grs/InchWeight
@29"*520•570R*500•550R*540•610R
3-183-28
*530•580R520500500
221221142016
0.520•0.5700.500•0.5500.540•0.610
0.5600.500
0.530•0.5800.5200.5000.500
0.5050.5100.531
A/C/EX10Nav
A/C/CA/C/C VectorRdlnLSpd
FB
75X7, 75
75
6.657.807.397.828.11 7.567.096.537.10
8.849.94
10.56
193226214227235 219206189206
256288306
Group T8
Size Spine Model Weight
Grs/InchWeight
@29"*470•520R*450•500R*480•540R
3-283-39
*480•530R460500500
2212221321142115
0.470•0.5200.450•0.5000.480•0.540
0.5000.440
0.480•0.5300.4600.5000.5000.5050.4600.5100.461
A/C/EX10Nav
A/C/CA/C/C VectorRdlnLSpd
FBX7
X7, 75X7, 75
75
6.818.107.988.118.58 7.787.326.537.108.849.929.94
10.75
197235231235249226212189206256288288312
Group T9
Size Spine Model Weight
Grs/InchWeight
@29"*430•470R*410•450R*430•480R
3-39
480460400400
2312221322142115
0.430•0.4700.410•0.4500.430•0.480
0.440
0.4800.4600.4000.4000.4230.4600.4250.461
A/C/EX10Nav
A/C/C
VectorRdlnLSpd
FBX7
X7, 75X775
7.038.488.428.58
7.787.327.417.759.489.92
10.4110.75
204246244249
226212215225275288302312
Group T10
Size Spine Model Weight
Grs/InchWeight
@29"*400•430R*380•410R*430•480R
3-393-49480410400400
2412241322142314
0.400•0.4300.380•0.4100.430•0.480
0.4400.3900.4800.4100.4000.4000.4000.3650.4250.390
A/C/EX10Nav
A/C/CA/C/C VectorRdlnLSpd
FBX7
X7, 75X7
X7, 75
7.508.878.428.588.83 7.787.607.417.759.65
10.5010.4110.76
218257244249256 226220215225280304302312
Group T11
Size Spine Model Weight
Grs/InchWeight
@29"*370•400R
380R
3-493-60
360400400
241323142315
0.370•0.4000.380
0.3900.340
0.3600.4000.400
0.3650.3900.340
A/C/EX10
A/C/CA/C/C
RdlnLSpd
FB
X7, 75X7, 75X7, 75
7.918.87
8.839.45
8.317.417.75
10.5010.7611.67
229257
256274
241215225
304312338
Group T12
Size Spine Model Weight
Grs/InchWeight
@29"370R
3-603-71
360340340
25122613
0.370
0.3400.300
0.3600.3400.340
0.3210.265
A/C/E
A/C/CA/C/C
RdlnLSpd
FB
X7X7
7.91
9.459.92
8.318.168.30
10.2811.49
229
274288
241237241
298333
COMPOUND BOW - Release AidCalculated Peak Bow Weight - Lbs. Correct Arrow Length for Target • Field • 3D
RECURVE BOWBow Weight - Lbs.
Finger Release
Soft Cam
AMO up to 210 FPSIBO up to 260 FPS
Medium Cam
AMO 211-230 FPSIBO 261-290 FPS
Single or Hard Cam
AMO 231 FPS upIBO 291 FPS up
221⁄2(57.2 cm)
23"231⁄2
(59.7 cm)
231⁄2
(59.7 cm)
24"241⁄2
(62.2 cm)
241⁄2
(62.2 cm)
25"251⁄2
(64.8 cm)
251⁄2(64.8 cm)
26"261⁄2
(67.3 cm)
261⁄2
(67.3 cm)
27"271⁄2
(69.9 cm)
28"281⁄2
(72.4 cm)
281⁄2
(72.4 cm)
29"291⁄2
(75.0 cm)
291⁄2
(75.0 cm)
30"301⁄2
(77.5 cm)
301⁄2
(77.5 cm)
31"311⁄2
(80.0 cm)
311⁄2
(80.0 cm)
32"321⁄2
(82.5 cm)
29-35 lbs.(13.2-15.9 kg) T1 T2 T3 17-23 lbs.
(7.7-10.4 kg)35-40 lbs.(15.9-18.1 kg)
29-35 lbs.(13.2-15.9 kg) T1 T2 T3 T4 T5 24-29 lbs.
(10.9-13.2 kg)40-45 lbs.(18.1-20.4 kg)
35-40 lbs.(15.9-18.1 kg)
29-35 lbs.(13.2-15.9 kg) T1 T2 T3 T4 T5 T6 T7 30-35 lbs.
(13.6-15.9 kg)45-50 lbs.(20.4-22.7 kg)
40-45 lbs.(18.1-20.4 kg)
35-40 lbs.(15.9-18.1 kg) T1 T2 T3 T4 T5 T6 T7 T8 T9 36-40 lbs.
(16.3-18.1 kg)50-55 lbs.(22.7-24.9 kg)
45-50 lbs.(20.4-22.7 kg)
40-45 lbs.(18.1-20.4 kg) T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 41-45 lbs.
(18.6-20.4 kg)55-60 lbs.(24.9-27.2 kg)
50-55 lbs.(22.7-24.9 kg)
45-50 lbs.(20.4-22.7 kg) T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 46-50 lbs.
(20.9-22.7 kg)60-65 lbs.(27.2-29.5 kg)
55-60 lbs.(24.9-27.2 kg)
50-55 lbs.(22.7-24.9 kg) T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 51-55 lbs.
(23.1-24.9 kg)65-70 lbs.(29.5-31.8 kg)
60-65 lbs.(27.2-29.5 kg)
55-60 lbs.(24.9-27.2 kg) T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 56-60 lbs.
(25.4-27.2 kg)70-76 lbs.(31.8-34.5 kg)
65-70 lbs.(29.5-31.8 kg)
60-65 lbs.(27.2-29.5 kg) T5 T6 T7 T8 T9 T10 T11 T12 T13 T13 61-65 lbs.
(27.7-29.5 kg)76-82 lbs.(34.5-37.2 kg)
70-76 lbs.(31.8-34.5 kg)
65-70 lbs.(29.5-31.8 kg) T6 T7 T8 T9 T10 T11 T12 T13 T13 T14 66-70 lbs.
(29.9-31.8 kg)82-88 lbs.(37.2-39.9 kg)
76-82 lbs.(34.5-37.2 kg)
70-76 lbs.(31.8-34.5 kg) T7 T8 T9 T10 T11 T12 T13 T13 T14 71-76 lbs.
(32.2-34.5 kg)No X10 or A/C/E shafts suitable in shaded areas above.
Group T13
Size Spine Model Weight
Grs/InchWeight
@29"3-7125122613
0.3000.3210.265
A/C/CX7X7
9.9210.2811.49
288298333
Group T14
Size/Spine Model Weight
Grs/InchWeight
@29”
2613 0.265 X7 11.49 333
R The size recommendations for recurve bows are indicated with a letter “R” next to the size.
Size Indicates suggested arrow sizeSpine Spine of arrow size shown (static)Model Designates arrow modelWeight Listed in grains per inch
A/C/E Aluminum/Carbon/ExtremeX10 X10 Shafts (Aluminum/Carbon) Nav Navigator (Aluminum/Carbon)A/C/C Aluminum/Carbon/CompositeVector VectorRdln RedlineLSpd LightSpeedFB FatBoyX7 X7 Eclipse and Cobalt (7178 alloy)75 XX75: Platinum Plus and Jazz (7075-T9 alloy)
Group Y3
Size Spine Model Weight
Grs/InchWeight
@29"14131416
2.0361.684
7575
5.947.15
172207
A/C/E Aluminum/Carbon/ExtremeX10 X10 Shafts (Aluminum/Carbon)Nav Navigator (Aluminum/Carbon)A/C/C Aluminum/Carbon/CompositeVector VectorRdln Redline Carbon CompositeX7 X7 Eclipse and Cobalt (7178 alloy)75 XX75: Platinum Plus and Jazz
(7075-T9 alloy)
Note: Shaft Weight at 29" is shown on our Shaft Selection Charts. To determine weight at your shaft length, multiply the grains-per-inch (gpi) by your actual shaft length not including point, insert or UNI Bushing.
Correct Arrow Length for Youth TargetRECURVE BOW
Bow Weight - Lbs.Finger Release
201⁄2(52.1 cm)
21"211⁄2
(54.6 cm)
211⁄2(54.6 cm)
22"221⁄2
(57.2 cm)
221⁄2(57.2 cm)
23"231⁄2
(59.7 cm)
231⁄2
(59.7 cm)
24"241⁄2
(62.2 cm)
241⁄2
(62.2 cm)
25"251⁄2
(64.8 cm)
251⁄2(64.8 cm)
26"261⁄2
(67.3 cm)
261⁄2
(67.3 cm)
27"271⁄2
(69.9 cm)
Y1 Y1 Y2 Y3 Y4 16-20 lbs.(7.3-9.1 kg)
Y1 Y1 Y2 Y3 Y4 Y5 20-24 lbs.(9.1-10.9 kg)
Y1 Y1 Y2 Y3 Y4 Y5 Y6 24-28 lbs.(10.9-12.7 kg)
Y1 Y2 Y3 Y4 Y5 Y6 Y7 28-32 lbs.(12.7-14.5 kg)
Y2 Y3 Y4 Y5 Y6 Y7 32-36 lbs.(14.5-16.3 kg)
Y3 Y4 Y5 Y6 Y7 36-40 lbs.(16.3-18.1 kg)
Group Y1
Size Spine Model Weight
Grs/InchWeight
@29"1214 2.501 75 5.93 172
Group Y2
Size Spine Model Weight
Grs/InchWeight
@29"1413 2.036 75 5.94 172
Group Y4
Size Spine Model Weight
Grs/InchWeight
@29"2-0015121416
1.5001.5531.684
A/C/CX775
4.725.847.15
137169207
Group Y5
Size Spine Model Weight
Grs/InchWeight
@29"125014003L-00151416121516
1.2501.4001.3001.3791.2981.403
A/C/EA/C/EA/C/C
X7X775
5.084.865.146.836.277.34
147141149198182213
Group Y6
Size Spine Model Weight
Grs/InchWeight
@29"12503-00161215161614
1.2501.1501.2981.4031.153
A/C/EA/C/C
X775X7
5.085.476.277.347.73
147159182213224
Group Y7
Size Spine Model Weight
Grs/InchWeight
@29"10001100100010003-0010501000171216141616
1.0001.1001.0001.0001.1501.0501.0001.0991.1531.079
A/C/EA/C/EX10Nav
A/C/CVectorRdlnX7X775
5.705.145.275.135.475.245.686.707.738.36
165149153149159152165194224242
1. Once you have determined your Correct Arrow Length and Calculated or Actual Peak Bow Weight, you are ready to select your correct shaft size:
1.1 Compound bows. In the “Calculated Peak Bow Weight” column (left-hand side of the CHART) select the column with the type cam on your bow. Then locate your Calculated Peak Bow Weight in that column.
1.2 Recurve bows. In the “Bow Weight” column (right-hand side of the CHART) locate your Actual Peak Bow Weight at your draw length.
2. Move across that row horizontally to the column indicating your Correct Arrow Length. Note the letter in the box where your Calculated or Actual Peak Bow Weight row and Correct Arrow Length column intersect. The “Size” box below the CHART with the same letter and number contains your recommended arrow sizes. Select an arrow from the Chart depending on the shaft material, shaft weight and type of shooting you will be doing.
USING THE TARGET ARROW SELECTION CHART
Group T1
Size Spine Model Weight
Grs/InchWt
@29"*920•1000R*900•1000R*880•1000R
2L-042-04
*920•1050R900
1712171317141616
0.920•1.0000.900•1.0000.880•1.000
1.0200.920
0.920•1.0500.9001.0991.0440.9631.079
A/C/EX10Nav
A/C/CA/C/C VectorRdlnX775X775
5.835.755.506.056.48 5.445.836.707.428.078.36
169167160175188 158169194215234242
Group T2
Size Spine Model Weight
Grs/InchWeight
@29"*780•850R*750•830R*810•880R
2-04
*770•840R780
181217141716
0.780•0.8500.750•0.8300.810•0.880
0.920
0.770•0.8400.780
0.8790.9630.880
A/C/EX10Nav
A/C/C
VectorRdln
X7X775
6.016.355.806.48
6.266.30
7.308.079.03
174184168188
182183
212234262
Group T3
Size Spine Model Weight
Grs/InchWeight
@29"*720•780R*700•750R*710•810R
3X-043L-04
*700•770R780
1912181318141816
0.720•0.7800.700•0.7500.710•0.810
0.8300.750
0.700•0.7700.7800.7780.8740.7990.756
A/C/EX10Nav
A/C/CA/C/C VectorRdlnX775X775
6.356.706.296.746.95 6.386.307.607.868.579.27
184194182195202 185183220228248269
EASTON OUTDOOR & INDOOR TARGET • FIELD • 3-D ARROW SELECTION CHART