e g for - o i b - issues.inkissues.ink/docs/sales-sheets/stoller_sell_sheets.pdf · ethylene...
TRANSCRIPT
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Bio-Forge®
Any Crop. Any Stage. Any Weather.
IMPROVED ROOT GROWTH ENSURES OPTIMAL HORMONE BALANCE & EFFICIENT NUTRIENT UPTAKEPlant Hormones must be constantly
synthesized and regulated in the
meristematic tissue (root tip cells) of the
plant. Maintaining and prolonging healthy
root tip growth is critical to the optimal
hormone balance needed for maximum
genetic growth.
Bio-Forge® works by up-regulating genes
from the plant’s own major antioxidative
pathways as well as genes responsible for
ethylene production and root growth.
GENE UP-REGULATIONKey genes with a measurable impact on plant
activity, up-regulated by Bio-Forge® are:
• DREB1A, drought-tolerance
Bio-Forge® suppresses excessive ethylene
at the genetic level by up-regulating the
Dreb1A gene. By inducing the regulatory
mastergene Dreb1A, a cascade affect in
turn up-regulates other genesinvolved in
resistance to drought and other environ-
mental stresses.
• Dehydrin, low temperature and water stress
• RAB18, low temperature, water stress or
exogenous ABA
• RD29A, cold temperature tolerance
• RLS4, associated with root development
and nutrient uptake
ENZYME UP-REGULATIONBio-Forge®is shown to up-regulate the four
enzymes that protect plants from damaging
free radicals which can occur in response
to:drought stress, injury from herbicides,
otherpesticides, nutrient deficiencies and
extreme temperatures.
The four enzymes are:
• Mnsuperoxide dismutase
• Catalase (CAT3)
• Dehydroascorbate reductase (DHR)
• Thioredoxin reductase (THR)
STOLLER® brand Bio-Forge®
is a patented formulation of
N,N’ —diformyl urea, classified
as an antiox-idant, and shown to
significantly improve growth in
a variety of agricultural crops by
working on the genetic level.
BIO-FORGE® Guaranteed Analysis 2-0-3
Total Nitrogen (N) (minimum)
2.000%
Soluble Potash (K2O)(minimum)
3.000%
Cobalt (Co) (actual)
0.2%
Molybdenum (Mo) (actual)
0.3%
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. Golden Harvest 5-18-2 is a trademark of Stoller Enterprises, Inc.
Golden Harvest™5-18-2
Increased yield and quality. High levels of micronutrients.
Golden Harvest™ 5-18-2 is a unique
suspension liquid foliar fertilizer with
high levels of micronutrients designed to
supplement soil-applied fertilizer.
Due to its unique patented chemistry, Golden
Harvest™ 5-18-2 rapidly enters the plant.
Since all nutrients are kept “high” in the plant
leaves, they will produce higher amounts of
food for the plant. Golden Harvest™ 5-18-2
is the only foliar fertilizer that makes this
practice feasible.
Golden Harvest™ 5-18-2 contains a great
quantity of non-mobile nutrients along
with N-P-K-S. Other foliar fertilizers usually
contain high levels of N-P-K but very low
levels of secondary and micronutrients. It
is the other nutrients that are usually short
in the crops. Golden Harvest™ 5-18-2 is the
key to maintaining the balance that is so
important to any crop nutrient plan.
FOLIAR APPLICATION OF GOLDEN HARVEST™ 5-18-2Apply as a foliar spray in a volume of water
sufficient for thorough coverage.
Avoid use with basic (high pH) copper
fungicides.
GOLDEN HARVEST™ 5-18-2 will aid in
providing nutrients as needed for growing
roots, and assisting in producing high quality
crops in conjunction with helping to increase
crop yield.
STOLLER® Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses.
Grow a more marketable
crop. Check this sheet for
basic information and benefits
from using Stoller’s GOLDEN
HARVEST™ 5-18-2 to enhance
your crop production. STOLLER®
brand products will help increase
your marketable yield, and profit.
Golden Harvest™ 5-18-2
Chemical and Physical Properties
Derived from Urea, phosphoric
acid, potassium chloride,
magnesium chloride, boric acid,
copper sulphate, ferrous chloride,
manganese sulphate, sodium
molybdate and zinc chloride.
Physical State: Liquid
Acidity: 1.5 -2 pH*
Non-flammable
Solubility in water - 100%
Guaranteed Analysis
5%N, 18%P2O5, 2%K2O, 1%S
0.4%Mg, 0.1%B, 0.1%Cu, 0.4%Fe,
0.4%Mn, 0.05%Mo, 0.08%Zn
GOLDEN HARVEST™ 5-18-2 is compatible
with most pesticides and spray additives, and
may be applied by air or ground up to final
harvest. A compatibility test should always
be performed before mixing products.
*Low pH (high acidity) will not cause leaf
burn. Foliage burn is caused by fertilizer salt,
not acid. Acidic products normally cause
less burn than alkaline products. GOLDEN
HARVEST™ 5-18-2 has a very low salt index.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Sugar Mover™
Controlling sugar movement for enhanced yields
SUGAR MOVER BENEFITS• Reinforces root growth
• Increases carbon fixation and sugar movement to roots and grain
• Provides more uniform, increased sizing of grain
• Enhances overwinter survival in perennial crops
• Helps prevent spring tillering in perennial crops
MODE OF ACTION• Converts nitrate nitrogen into more functional forms of nitrogen in
the plant
• Moves sugar from leaves into the roots for improved overall plant
vigor and reproductive growth
• Increases production and movement of sugars from the leaves to
the seed head resulting in more uniform, larger grain
SUGAR MOVER APPLICATIONApply 1 litre per acre at flowering before pods appear (approximately
20% flower).
Stoller products optimize plant genetic expression by helping to unleash the natural power of plants, bolstering tolerance to adverse weather, and other stresses, increasing marketable yield, and profit.
SUGAR MOVERTM
Guaranteed Analysis0-0-0
Boron (B) 8.000%
Molybdenum (Mo) 0.004%
Derived from boric acid and molybdic oxide.
Contains growth-enhancing co-factors.
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
MP Super Starter™
Improved nutrient uptake in roots for contiuous new root growth
Stoller’s MP Super Starter Nutrient uptake
occurs primarily in root areas with active
cell division and cell differentiation. Better
root growth leads to better nutrient uptake.
MP SUPER STARTER has been specially
formulated to enhance root growth in
young and growing plants, allowing
improved nutrient uptake.
In order to have healthy plant growth and
achieve high yields, the root system must
have continuous new growth. Nutrients are
only absorbed at the growing points of new
root growth. The old parts of the roots are
of little value.
When plants begin their vigorous growth
stage, the new root growth tends to
slow down. When plants approach the
reproductive period, roots quickly go
backward. We must do everything possible
to keep this new root growth continuously
developing throughout the entire period
of the plant’s development. The use of MP
SUPER STARTER should set the genetic
expression so that new roots continue to
grow on the plant.
SEED TREATMENTMP SUPER STARTER applied to wheat
showed very large increases in uptake of
manganese, copper, and especially zinc.
MP SUPER STARTER also proved more
effective in increasing nutrient uptake
when compared to plants which had been
treated with a single micronutrient. Copper,
manganese and zinc were much more
effective in combination than they were
when applied alone.
Stoller Products optimize plant
genetic expression by bolstering
natural plant tolerance to adverse
weather and other stresses.
STOLLER® brand products will
help increase your marketable
yield, and profit.
MP SUPER STARTERTM
Micronutrient MixGuaranteed Analysis
0-0-0
Copper (Cu) (Actual) 1.0%
Iron (Fe) (Actual) 0.5 %
Manganese (Mn) (Actual) 2.0%
Zinc (Zn) (Actual) 3.0%
• Stoller’s new formulation of MP SUPER
STARTER is not sticky and will dry down
faster than previously.
• MP SUPER STARTER will readily disperse
in water and most pesticides can be
added to the spray mixture.
“SEEDING” (IN-FURROW) APPLICATION• Apply at 1L/acre when “seeding”.
• MP SUPER STARTER may also be sprayed
on the granular fertilizer blend at 0.5L/acre.
• MP SUPER STARTER may also be
mixed with liquid fertilizer at 1L/acre.
Always perform a “jar test” to determine
compatibility before mixing.
This is important because fertilizer nutrients
can only be absorbed in the area of this
new root growth. Plant growth hormones
are only synthesized in this area of new
root growth. If new root growth is not
continuous, the plant will not pick up
sufficient nutrients and become hormonally
unbalanced through its growth stages. We
must protect the plant against the lack of
new root growth.
As can be seen by the data, new root growth
was measured approximately 25 days after
seeding, clearly demonstrating the increase
in new root growth on wheat plants.
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
X-Tra Power™ Increased reproductive growth and controlled vegetative growth
X-TRA POWER• Corrects micronutrient concerns
• Promotes female flower production
• Promotes plant vigor during the earliest
stages of plant development
• Enhances root growth & stem diameter
• Increases seedling vigor
• Increases weather/stress tolerance
• Reduce need for phosphate application
X-TRA POWER can be applied in starter
solutions, transplant solutions or in-furrow
programs at the rate of 1-2 litres per acre. X-
TRA POWER’S mixture of growth-enhancing
co-factors has been selectively balanced to
promote vigorous root growth while the plant
is in the infant stage.
X-TRA POWER• Mixes with herbicides and insecticides
• Mixes with pop-up fertilizers
• Is water soluble and will be taken up by the
plant roots and seed without phytotoxicity
when used as directed
• Will precondition the crop to better tolerate
adverse weather conditions such as cold
and hot weather, drought and flooded con-
ditions when used as directed
Stoller products optimize plant
genetic expression by bolstering
natural plant tolerance to adverse
weather, herbicide and other
stresses. STOLLER® brand
products will help increase your
marketable yield, and profit.
X-TRA POWERTM
Guaranteed Analysis0-0-0
Magnesium (Mg) 0.80%
0.80% Chelated Magnesium
Copper (Cu) 0.80%
0.80% Chelated Copper
Manganese (Mn) 0.80%
0.80% Chelated Manganese
Zinc (Zn) 3.20%
3.20% Chelated Zinc
Contains growth-enhancing co-factors.X-Tra Power In-Furrow on CORN
22.5 bu/ac increase average
190
200
Year 1 Year 2
X-Tra PowerControl
Year 3
180
170
160
150
0
164
179
199
173
182
212
148159
224.6
256.5
214.9216.5
X-Tra Power on CORN
20.2 bu/ac increase average
300
Advance, MOA NE
X-Tra PowerControl
Yuma, CO
200
100
0
1L/Acre, corn 2"-3" tall
1L/Acre, in-furrow, University of IL
Aurora,
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Balancer™ Control the effect of excessive nitrates and increase sugar movement
Balancer™ is a convenient, effective
alternative to soluble boron with the
added benefit of molybdenum to promote
conversion of nitrate nitrogen into more
metabolically functional forms.
When crops enter their reproductive stage,
carbohydrates (sugars) tend to move toward
the reproductive sites (seeds). The roots
receive less food. They start to reduce
growth and begin to die. This results in early
death and reduced seed filling time.
THE HIGHEST YIELDS ALWAYS OCCUR WHEN STALKS OR STEMS ARE STILL GREEN AT HARVEST TIMEIt is important to discharge sugars from
the leaves just as the reproductive period
begins. This will also enable food to
move into the roots before they start to
deteriorate. Root growth will then continue
during the reproductive period. It is this
EARLY discharge of sugars that inhibits
“early dying”. If plant leaves discharge a lot
of sugar earlier than normal, more sucrose
will be available for larger seed, pods, and
kernel size.
BALANCER IS A LIQUID PRODUCT THAT IS DESIGNED TO:• Maintain hormone balance in a crop that
uses high levels of nitrogen.
• Maximize the production of symbiotic
nitrogen fixing bacteria in legumes.
• Increase fruit, seed and storage tissue
uniformity.
• Move carbohydrates out of the leaves to the
roots, storage tissue, seeds or fruit.
• Reduce excessive vegetative growth.
• Increase disease resistance
• Prepare crops for harvest.
Stoller Products optimize plant
genetic expression by bolstering
natural plant tolerance to adverse
weather and other stresses.
Check this specimen label for
basic information and benefits
from using Stoller’s BALANCER.
STOLLER® brand products will
help increase your marketable
yield, and profit.
BALANCERTM
Guaranteed Analysis0-0-0
Boron (B) 9.0%
Molybdenum (Mo) 0.005%
Derived from boric acid and molybdic
oxide.
BALANCER PROMOTES NITROGEN BALANCE IN TWO WAYS:1. Boron enhances nitrogen utilization by
improving sugar transport and metabolism,
auxin metabolism and seed and fruit
development.
2. Molybdenum is essential for the initial
conversion of nitrate nitrogen into nitrogen
forms that contribute to higher yields
rather than rank growth.
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
ACTION 5X™For enhanced pollination in high temperatures
ENHANCE FERTILITY IN HIGH TEMPERATURES.ACTION 5X, increases fertility in high
temperatures during the stressful pollination
or flowering period.
ACTION 5X up-regulates genes associated
with sugar transport, increasing sugars in
the reproductive parts of the plant. High
temperatures (over 30°C) during pollination
and flowering is a guaranteed way to suffer
losses of crop production, yields and profits.
Even in good growing seasons a short
period of high heat conditions at the critical
pollination point can turn a promising
year into a bad year. When the heat units
are unusually high, foliar applications of
ACTION 5X at 1L/acre can get your crop
back on track.
BENEFITS OF ACTION 5X• Increased flowering and fruit set in high
temperatures
• Reduced physiological problems
• Improved yields
• Increased tillers on tillering crops
APPLICATION INFORMATIONCritical temperature points:
Canola 27°C
Corn 30°C
Soybeans 29°C
Wheat 25°C
When heat units are unusually high with
temperatures exceed 30°C for 7 days,
ACTION 5X should be applied at 1L/acre
for 10-day intervals until daytime high
temperatures drop below 30°C.
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this sheet for basic information
and benefits from using Stoller’s
ACTION 5X to enhance your crop
production. STOLLER® brand
products will help increase your
marketable yield, and profit.
ACTION 5XTM
Concentration of Element w/wCalcium (Ca) 5%
11.5kg/10 Liters
0
5
10
15
20
25
Ctl ACTION 5X
A second application may be advisable
if high temperatures persist for 10 days
or more. ACTION 5X can be applied with
fungicides to protect against infertility of
pollen and flowers under temperature and
moisture stress. Apply ACTION 5X at 1L/acre
with fungicide applications.
Research conducted on Arabidopsis
Action 5X Improves Pollination Temps over 30°C
51% Increase
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
SETT™Supports plants’ root production & reduces breakdown
SETT is formulated from calcium and boron,
specifically designed to maintain the struc-
tural strength and health of both the leaf and
fruit cells.
CELL WALL INTEGRITYThe impact on quality of calcium and boron
in plants cannot be replaced by other ele-
ments. An imbalance of these two elements
weakens the cell walls of the plant and in-
creases the risk of fruit failure.
Calcium is the structural component of the
cell while boron stabilizes the action of calci-
um. Where there is an abundance of calcium,
boron overload is never a problem. The free
radicals that lead to fruit breakdown are mini-
mized by the calcium and boron co-action.
BENEFITS OF SETT ON FRUIT:• Enhances fruit characteristics
• Promotes fruit firmness
• Reduces the effects of fruit aging on the
tree or vine
• Slows pulp softening during storage
• Promotes the reduction of numerous stor-
age disorders
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this specimen label for basic
information and benefits from
using Stoller’s SETT. STOLLER®
brand products will help increase
your marketable yield, and profit.
SETTTM
Guaranteed Analysis0-0-0
Calcium (Ca) 8.0%
Boron (B) 0.5%
Derived from calcium chloride and
sodium borate.
Recommended rate of 1-2L/acre on
all crops during flowering.
SETT is designed for foliar application and
can mix with some fertilizers and pesticides.
Consult the label prior to use.
Growers may continue the use of SETT for
the management of fruit to be harvested.
These late foliar applications will increase
shelf life and fruit firmness on any crop:
• All fruiting vegetable crops
• All fruiting tree crops
• Leaf crops
• Corn
• Soy Beans and other bean crops
SETT WILL:• Increase marketable yield
• Improved fruit quality
• Promote better seed formation
• Increase fruit flavor
• Increase fruit retention
Nothing herein is to be constructed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. Copyright ©2013 Stoller Enterprises, Inc. All Rights Reserved.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. MP™ Nine Percent Boron is a trademark of Stoller Enterprises, Inc.
MP™Nine Percent Boron
Boron influences set of flower and fruit as well as yield and quality
Boron is needed in protein synthesis for
formation of plant hormones. It also increases
cellular activity which promotes maturity,
influencing increased set of flower and fruit
as well as yield and quality. Boron affects
nitrogen and carbohydrate metabolism and
water relations in the plant.
Boron is immobile in plants, so an adequate
supply is needed throughout the growing
season. Once utilized in the active growing
tissue of the plant, boron cannot be
translocated and used again. This means
there must be a continuous source of boron
available throughout the growth cycle.
Boron availability decreases as pH
increases. Therefore, high pH or heavily
limed soils have limited amounts of boron
available for plant growth.
SOIL APPLICATION(Rates: 0.5 - 1 litre per acre)
Apply with sufficient carrier to provide
complete coverage. Soil applied boron must
be moved into the root zone to be available
to the plant. This can be accomplished by
irrigation, rainfall, or tillage.
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this sheet for basic information
and benefits from using Stoller’s
MP Nine Percent Boron to enhance
your crop production. STOLLER®
brand products will help increase
your marketable yield, and profit.
MP™ Nine Percent BoronChemical and Physical Properties
Physical State: Organic Liquid
Freezing Point: -10° F
Boiling Point: 100° C - 212° F
Acidity: 8 pH
Non-flammable
Solubility in water - 100%
MP™ Nine Percent BoronConcentration of Element w/w
Boron (B) 9%
lbs./gallon 10.6
FOLIAR APPLICATION(Rates: 0.5 - 1 litre per acre)
Apply with enough carrier to thoroughly
cover all foliage. Multiple applications of
MP BORON will aid in redistribution of
photosynthates within the plant. Note:
When mixing with water-soluble bags,
dissolve them before adding boron to the
tank or dissolve the bags in a bucket of
water, then add to the tank.
MP is more than a micronutrient.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. MP™ Five Percent Copper is a trademark of Stoller Enterprises, Inc.
MP™Five Percent Copper
Copper functions in plant growth cannot be replaced by any other element.
Copper functions in plant growth cannot be
replaced by any other element. Copper is an
enzyme activator, and becomes a component
of enzymes that function in respiration and
photosynthesis. Copper is also part of the
enzyme system, which becomes chlorophyll.
Copper contributes to disease resistance,
and helps reduce “blanks” (seed abortions) in
cereal grains.
Soils with high levels of organic matter, sandy
soils prone to leaching, high pH soils, and
high levels of phosphate, aluminum, zinc,
iron and manganese can all cause a copper
deficiency.
SOIL AND FOLIAR APPLICATION OF MP COPPERRates: 0.5 - 1 litre per acre
MP Copper can be applied alone or with
liquid fertilizer for soil application. Band,
sidedress or broadcast within two weeks
after emergence, or when deficiency
symptoms first appear.
For foliar application apply with enough
carrier to thoroughly cover all foliage. For
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this sheet for basic information and
benefits from using Stoller’s MP
Five Percent Copper to enhance
your crop production. STOLLER®
brand products will help increase
your marketable yield, and profit.
MP™ Five Percent CopperChemical and Physical Properties
Physical State: Organic Liquid
Freezing Point: -10° F
Boiling Point: 100° C - 212° F
Acidity: 8 pH
Non-flammable
Solubility in water - 100%
MP™ Five Percent CopperConcentration of Element w/w
Copper (Cu) 5%
lbs./gallon 10.0
Kg/litre 1.2
best results, spray when the crop is in an
active growing state, after irrigation or
natural rainfall. Use sufficient spray volume to
provide uniform coverage of the leaves and
woody tissue on tree crops.
MP brand micronutrients will readily disperse
in water. Most pesticides can be added to the
spray mixture.
For other MP brand products, and other use
details, read product label thoroughly for
application directions before use.
MP is more than a micronutrient.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. MP™ Ten Percent Zinc is a trademark of Stoller Enterprises, Inc.
MP™Ten Percent Zinc
Zinc is necessary for all new plant tissue growth.
Zinc plays a role in seed and grain
formation. Zinc is also essential in the
formation of Chlorophyll.
Zinc functions like antifreeze in a plant. The
plant can withstand lower temperatures
if zinc is present in sufficient quantities
in the leaves. Zinc is important in the
transformation of carbohydrates and
regulation of the consumption of sugar in
the plant, as well.
Calcareous soils, acid-leached soils, coarse
sands, over-limed soils and both high-and
low-organic-matter soils are all typically
plagued by zinc deficiencies.
Soil compaction and cold, wet springs can
also adversely affect zinc uptake.
SOIL AND FOLIAR APPLICATION OF MP ZINCRates: 0.5 - 1 litre per acre
MP Zinc can be applied alone or with liquid
fertilizer for soil applications.
For best results, spray when the crop is in
an active growing state, after irrigation or
natural rainfall.
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this sheet for basic information and
benefits from using Stoller’s MP
Ten Percent Zinc to enhance your
crop production. STOLLER® brand
products will help increase your
marketable yield, and profit.
MP™ Ten Percent ZincChemical and Physical Properties
Physical State: Organic Liquid
Freezing Point: -10° F
Boiling Point: 100° C - 212° F
Acidity: 8 pH
Non-flammable
Solubility in water - 100%
MP™ Ten Percent ZincConcentration of Element w/w
Zinc (Zn) 9%
lbs./gallon 10.9
Kg/litre 1.30
Use sufficient spray volume to provide
uniform coverage of the leaves and woody
tissue on tree crops.
MP brand micronutrients will readily
disperse in water. Most pesticides can be
added to the spray mixture. Always do a
jar test.
For other MP brand products, and other use
details, read product label thoroughly for
application directions before use.
MP is more than a micronutrient.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. MP™ Nine Percent Boron is a trademark of Stoller Enterprises, Inc.
MP™Three Percent Magnesium
Magnesium plays a vital role in photosynthesis.
Magnesium is THE key element in chlorophyll.
Magnesium also improves the utilization and
mobility of phosphorus and iron.
Magnesium is very mobile in plants, and plays
a vital role in photosynthesis. It is an activator
and component of many plant enzymes,
and influences the timing and uniformity of
maturity.
Factors contributing to magnesium
deficiencies can include high soil levels of
calcium, sodium or potassium, cool weather,
and rapid uptake of nitrogen fertilizer.
Row crops utilize most of the magnesium
during the first forty days of growth. Small
grains need magnesium most during the
early growth stage.
SOIL AND FOLIAR APPLICATION OF MP MAGNESIUMRates: 0.5 - 1 litre per acre
MP Magnesium can be applied alone or with
liquid fertilizer.
For best results, spray when the crop is in
an active growing state, after irrigation or
natural rainfall.
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this sheet for basic information
and benefits from using Stoller’s
MP Three Percent Magnesium to
enhance your crop production.
STOLLER® brand products will
help increase your marketable
yield, and profit.
MP™ Three Percent MagnesiumChemical and Physical Properties
Physical State: Liquid
Freezing Point: 0° C
Boiling Point: 100° C
Acidity: Slightly Acidic (6.2 pH)
Non-flammable
Solubility in water - 100%
MP™ Three Percent MagnesiumConcentration of Element w/w
Magnesium (Mg) 3%
lbs./gallon 10.0
Kg/litre 1.24
Use sufficient spray volume to provide
uniform coverage of the leaves and woody
tissue on tree crops.
MP brand micronutrients will readily disperse
in water. Most pesticides can be added to the
spray mixture.
For other MP brand products, and other use
details, read product label thoroughly for
application directions before use.
MP is more than a micronutrient.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. MP™ Five Percent Manganese is a trademark of Stoller Enterprises, Inc.
MP™Five Percent Manganese
Manganese is important to the development of chloroplast,where sunlight energy is converted to chemical energy.
Manganese is an enzyme catalyst, and
plays a role in the assimilation of carbon
dioxide. Manganese is also important to the
development of chloroplast, where sunlight
energy is converted to chemical energy.
Manganese activates the reduction of nitrite
and hydroxylamine to ammonia and is the
predominant metal ion in the metabolism of
organic acids. Manganese is also important
to disease resistance.
Manganese is not readily available above a
soil pH of 6.5. Manganese deficiencies are
more likely in low-organic-matter soils.
SOIL AND FOLIAR APPLICATION OF MP MANGANESERates: 0.5 - 1 litre per acre
MP Manganese can be applied alone or with
liquid fertilizer for soil applications.
For best results, spray when the crop is in
an active growing state, after irrigation or
natural rainfall. For most crops, application
within 20 days of emergence is optimal. Split
applications may provide results superior to
single applications.
Stoller Crop Health Products
optimize plant genetic expression
by bolstering natural plant
tolerance to adverse weather,
herbicide and other stresses. Grow
a more marketable crop. Check
this sheet for basic information
and benefits from using Stoller’s
MP Five Percent Manganese to
enhance your crop production.
STOLLER® brand products will
help increase your marketable
yield, and profit.
MP™ Five Percent ManganeseChemical and Physical Properties
Physical State: Organic Liquid
Freezing Point: -10° F
Boiling Point: 100° C - 212° F
Acidity: 8 pH
Non-flammable
Solubility in water - 100%
MP™ Five Percent ManganeseConcentration of Element w/w
Manganese (Mn) 5%
lbs./gallon 9.8
Kg/litre 1.18
Use sufficient spray volume to provide
uniform coverage of the leaves and woody
tissue on tree crops.
MP brand micronutrients will readily disperse
in water. Most pesticides can be added to the
spray mixture.
For other MP brand products, and other use
details, read product label thoroughly for
application directions before use.
MP is more than a micronutrient.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. MP™ Iron is a trademark of Stoller Enterprises, Inc.
MP™Iron
Iron functions in chlorophyll synthesis and the respiratory system of cells.
SOIL APPLICATION OF MP IRONMP Iron can be applied alone or with liquid
fertilizer.
Mild Micronutrient Deficiency: 1 Litre/Acre
Moderate Micronutrient Deficiency: 1.5 – 2
Litres/Acre
Severe Micronutrient Deficiency: 2 – 4 Litres/
Acre
FOLIAR APPLICATION OF MP IRONVegetables: apply 0.5 to 1 Litre/Acre
Field Crops: apply 0.5 – 1.5 Litres/Acre when
plants are young.
Tree Crops: apply 4 Litres in 500 gallons of
dilute spray
For best results, spray when the crop is in
an active growing state, after irrigation or
natural rainfall.
Use sufficient spray volume to provide
uniform coverage of the leaves and woody
tissue on tree crops.
MP brand micronutrients will readily disperse
in water. Most pesticides can be added to the
spray mixture.
For other MP brand products, and other use
details, read product label thoroughly for ap-
plication directions before use.
MP is more than a micronutrient.
Iron is needed in the sequence
of reactions which synthesize
components of chlorophyll. Iron
also functions in plants as part
of an enzyme mechanism which
operates the respiratory system
of living cells. Compounds of iron
participate in reactions involving
cell division and growth.
MP IronChemical and Physical Properties
Physical State: Organic liquid
Freezing Point: -10° F
Boiling Point: 100o C - 212° F
Acidity: 8 pH
Non-flammable
Solubility in water – 100%
MP IronConcentration of Element w/w lbs/
gallon Kg/litre
Iron (Fe) 5% 10.4 1.30
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. Harvest Crystal™ 5-10-27 is a trademark of Stoller Enterprises, Inc.
Harvest Crystal™5-10-27
Help increase your marketable yield.
Harvest Crystal 5-10-27 is a soluble fertilizer
crystal. It can be used for both soil application,
through irrigation, or can be used as a foliar
application. Because it has an acid pH, it can
be used with most fungicides and insecticides.
It will also acidify the irrigation water so that it
will inhibit the build up of carbonates in both the
irrigation emitters and the soil around the plant
roots. This is an enormous agronomic advantage.
Harvest Crystal 5-10-27 has a significantly
higher amount of trace elements than the
common soluble fertilizers that are now used.
The micronutrient level is nearly 100 times
higher than the micronutrient levels in most
soluble fertilizers.
Nutritionally, Harvest Crystal 5-10-27 is the
only product that contains high levels of both
calcium and magnesium. These two nutrients
are very important in the control of stress.
Harvest Crystal 5-10-27 is very high in potash -
the nutrient that is very closely related to sugar
movement from the leaves to the developing
fruit or storage tissue on any plant.
Harvest Crystal 5-10-27 has very low levels of
nitrogen. Since the needs for nitrogen vary so
much between different plant species, it best for
the end-user to add the amount of nitrogen to
Harvest Crystal 5-10-27 according to the need
and timing for the crop. Normally, the nitrogen
is added as a urea source. The use of urea as a
nitrogen source will not interfere with the pH of
Harvest Crystal 5-10-27.
HARVEST CRYSTAL 5-10-27 Guaranteed Analysis
Total Nitrogen (N) 5.000%
5.000% Urea Nitrogen
Available Phosphate (P2O5)
10.000%
Soluble Potash (K2O) 27.000%
Calcium (Ca) 4.000%
4.000% Chelated calcium
Magnesium (Mg) 1.500%
1.500% Chelated magnesium
Boron (B) 0.150%
Cobalt (Co) 0.008%
0.008% Chelated cobalt
Copper (Cu) 0.300%
0.300% Chelated copper
Manganese (Mn) 0.500%
0.500% Chelated manganese
Molybdenum (Mo) 0.008%
Zinc (Zn) 0.500%
0.500% Chelated zinc
Plant nutrients derived from urea
phosphate, potassium chloride,
urea, boric acid, sodium molybdate
and the calcium, magnesium,
cobalt, copper, manganese
and zinc salts of tetrasodium
ethylenediaminetetraacetate
(EDTA).
If Harvest Crystal 5-10-27 is applied every
7 days at the rate of 10 pounds per acre (10
kilos per hectare) any crop is assured that
there will be no deficiencies in either calcium,
magnesium, boron, cobalt, copper, manganese,
molybdenum, and zinc. It is normally used every
7 days in order to complement the initial soil
fertilizer application.
If irrigation is not available, Harvest Crystal 5-10-
27 can be foliar applied every 7 to 14 days at
the same rate that is normally applied through
the irrigation. One must be careful, to avoid the
pollination period so that the fertilizer nutrients
do not interfere with pollination.
Harvest Crystal 5-10-27 will provide the plant
with any nutrients that are not available from
the regular fertilizer program or, “free choice
feeding”. The plant roots will not absorb
nutrients that they do not need and absorb the
nutrients that they do need. The plant roots are
given signals by the cells in the upper part of
the plant telling the roots which nutrients they
need. The roots then respond, absorbing the
necessary nutrients.
There is no other soluble fertilizer that contains
a balance type of secondary and micro nutrient
formulation to allow the plant to pick and
choose which nutrients it needs during different
stages of growth.
The values of the secondary and micro nutrients
in Harvest Crystal 5-10-27 are three times the
value of the nutrients contained in the nitrogen,
phosphate, and potash nutrient value. The
advantages for crop production are many times
more advantageous than the use of a regular
soluble fertilizer.
Toll Free # 1-855-787-4414 • www.stollerenterprises.ca • twitter – @stollerent
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim a liability with respect to the use of any material supplied by us. Action™ 5 Percent Calcium is a trademark of Stoller Enterprises, Inc.
Action™5 Percent Calcium
Overcome negative effects of salty soils
ACTION 5%: VERSATILE & AVAILABLE• Is an extremely plant-available form of
Calcium
• Can be used as a seed treatment, in furrow
or as a foliar application
• Promotes rapid, vigorous root shoot growth
for overall improves seedling vigor
• Forces movement of Auxin down from
new leaf growth to the roots of the plant
for increased cellular division resulting in
healthier roots.
TAKE “ACTION” AGAINST SALTY SOIL• Salty soil can have severely negative effects
on seedling crops after germination occurs
• This occurs because sodium interferes
with calcium uptake, weakening the plant.
Stress hormone levels (Ethylene & ABA)
increase in “salty” plants
• Applying Action 5% as a seed treatment can
help newly germinated plants to mitigate
these negative effects
APPLICATION RATES• Apply as a seed treatment at 0.25L / 100lbs
of seed
• Apply in furrow or as a foliar treatment at a
rate of 0.25L / Acre
STOLLER® brand products
optimize plant genetic expression
by helping to unleash the natural
power of plants, bolstering
tolerance to adverse weather,
and other stresses, increasing
marketable yield and profit.
ACTION
Guaranteed Analysis
0-0-0
Calcium (Ca) 5.0%
Derived from calcium chloride.
Contains growth enhancing co-
factors.