e- auction sale process memorandum e …sknl.co.in/updated e-auction process memorandum...
TRANSCRIPT
________________________________________________________________________________________________________
1
E- AUCTION SALE PROCESS
MEMORANDUM
E-Auction Sale of assets of
S. Kumars Nationwide Limited - In Liquidation
CIN:L17120MH1990PLC058361
Date of Auction Announcement – December 12, 2019
Date of E-Auction – February 6, 2020 (as per Corrigendum)
Issued by:
Mr. Om Prakash Agrawal
Liquidator — S. Kumars Nationwide Limited
IBBI Reg. No: IBBI/IPA-001/IP-P00201/2017-18/10444
Regd Address: 801, Sterling Towers, 3rd Cross Lane, Lokhandwala complex,
Andheri (West), Mumbai 400053
Office: I-21/22, Paragon Centre, P. B. Marg, Worli, Mumbai – 400013
Email: [email protected]
Dated: December 12, 2019 updated on January 15, 2020
________________________________________________________________________________________________________
2
TABLE OF CONTENTS
1. INTRODUCTION .................................................................................................................................. 3
2. DEFINITIONS ....................................................................................................................................... 4
3. BID PROCESS ....................................................................................................................................... 6
4. ELIGIBILITY CRITERIA .................................................................................................................... 9
5. DOCUMENTS REQUIRED TO BE SUBMITTED TO ASCERTAIN ELIGIBILITY OF THE
BIDDER(S)........................................................................................................................................... 10
6. PHYSICAL VERIFICATION AND SITE VISIT ............................................................................... 11
7. DUE DILIGENCE ............................................................................................................................... 12
8. ASSETS TO BE AUCTIONED AND RESERVE PRICE................................................................... 13
9. E-AUCTION DETAILS ....................................................................................................................... 15
10. EARNEST MONEY DEPOSIT ........................................................................................................... 16
11. DECLARATION OF SUCCESSFUL BIDDER(S) ............................................................................. 18
12. FRAUDULENT AND CORRUPT PRACTICES ................................................................................ 20
13. COSTS, EXPENSES AND TAX IMPLICATIONS ............................................................................ 22
14. GOVERNING LAW AND JURISDICTION ...................................................................................... 23
15. TIMELINE........................................................................................................................................... 24
16. DISCLAIMER ..................................................................................................................................... 26
17. ANNEXURES ...................................................................................................................................... 28
A. ANNEXURE I ...................................................................................................................................... 28
B. ANNEXURE II..................................................................................................................................... 33
C. ANNEXURE III ................................................................................................................................... 36
D. ANNEXURE IV ................................................................................................................................... 38
E. ANNEXURE V ..................................................................................................................................... 40
F. ANNEXURE VI ................................................................................................................................... 42
1. Building details ................................................................................................................................... 45
2. Plant and Machinery Details .............................................................................................................. 47
________________________________________________________________________________________________________
3
1. INTRODUCTION
S. Kumars Nationwide Limited (“SKNL”/ the Company) is a textile company established by S.
Kumars Group having its registered office in Mumbai. SKNL was incorporated as public limited
company in 1990. In 1998, SKNL entered in collaboration with Reid & Taylor (International)
Limited for manufacturing and marketing of suiting under the brand “Reid & Taylor” in India. It was
setup as a subsidiary company under the flagship of SKNL and named as Reid & Taylor (India)
Limited (RTIL). RTIL is also currently undergoing the Liquidation process.
The Company is in the business of manufacturing of cotton fabrics and has an operational weaving
and processing unit at Bharuch, Gujarat, (known as High Value Fine Cotton Fabric Unit). The
Bharuch unit has a capacity of manufacturing 12.50 million meters for weaving and 18 million for
processing and finishing of cotton fabric annually; however, currently it is working at around 30% of
its total capacity. The Company has imported plant & machinery and commissioned at Bharuch Unit
under EPCG Scheme but has not fully fulfilled export obligation under the said Scheme.
On April 24, 2018, due to non-payment of debt, CIRP was initiated under IBC by the creditors of
SKNL. However, as no resolution could be arrived at during the CIRP, the Hon’ble NCLT approved
commencement of the Liquidation Process vide order dated June 19, 2019 and appointed Mr. Om
Prakash Agrawal as Liquidator of SKNL with effect from the said date.
It is the endeavour of the Liquidator to sell the Assets and properties comprising the liquidation
estate of the Company in the manner specified under Regulation 32, 33 and Schedule I (provided
under Regulation 33) of the Insolvency and Bankruptcy Board of India (Liquidation Process)
Regulations 2016 and other rules, regulations, orders, circulars, directions or notifications or the
like, issued pursuant to or under the IBC or the Liquidation Process Regulations, as the case may be,
and as per directions, if any, of the NCLT in respect of the liquidation process of the Company and
in the manner specified in this E-Auction Sale Process Memorandum.
The E-Auction Participant(s) are encouraged to make themselves acquainted with the provisions of
the IBC and the Liquidation Process Regulations and any other rules, regulations, orders, circulars,
directions or notifications or the like, issued pursuant to or under the IBC or the Liquidation Process
Regulations, as the case may be.
________________________________________________________________________________________________________
4
2. DEFINITIONS
A. “Adjudicating Authority” or “NCLT” shall mean the Hon’ble Mumbai Bench of the
National Company Law Tribunal;
B. “Applicable Laws” shall mean all applicable laws, regulations, rules, guidelines, circulars,
re-enactments, revisions, applications and adaptations thereto, judgments, decrees,
injunctions, writs and orders of any court, arbitrator or governmental agency or authority,
rules, regulations, orders and interpretations of any governmental authority, court or statutory
or other body applicable for such transactions including but not limited to the IBC,
Liquidation Regulations, Companies Act, 1956 / 2013 (as applicable), Competition Act, 2002
, Transfer of Properties Act, 1882, Sale of Goods Act, 1930, Foreign Exchange Management
Act, 1999, whether in effect as of the date of this E Auction Process Information Document
or thereafter and each as amended from time to time;
C. “Assets” shall mean the assets of the S. Kumars Nationwide Limited as specified in Clause 8
of this E-Auction Sale Process Memorandum;
D. “Bid” shall mean, any bid submitted by the Bidder(s) as required in terms of this E-Auction
Sale Process Memorandum and in accordance with the provisions of IBC read together with
the Liquidation Process Regulations and the Applicable Laws;
E. “CIRP” shall mean Corporate Insolvency Resolution Process as per the Insolvency and
Bankruptcy Code, 2016;
F. “E-Auction Sale Process Memorandum” or “Document” shall mean this document
including all the appendices hereto, for the purposes of setting out the process for submission
of a bid and selection of Successful Bid in accordance with the provisions of the IBC and
shall include all supplements, modifications, amendments, alterations or clarifications thereto
issued in accordance with the terms hereof;
G. “E-Auction Participant(s)” or “Bidder(s)” shall mean, Person or Persons who submitted a
bid as per the E-Auction Sale Process Memorandum; and shall include a Qualified Bidder(s)
or the Successful Bidder(s), as the case may be, and as the context requires;
H. “Eligible Bidder(s)” shall mean Bidder(s) who are eligible in terms of this E-Auction Sale
Process Memorandum, provisions of IBC and provisions of the Liquidation Process
Regulations;
I. “EOI” or “Expression of Interest” shall mean an intimation from the Bidder(s) to the
Liquidator specifying their interest to be a part of the E-Auction process
J. “IBC” shall mean Insolvency and Bankruptcy Code, 2016 and the related rules and
regulations issued thereunder, as amended from time to time;
K. “Liquidation Process Regulations” shall mean, the Insolvency and Bankruptcy Board of
India (Liquidation Process) Regulations 2016 as amended from time to time;
________________________________________________________________________________________________________
5
L. “Liquidator” shall mean an insolvency professional appointed as a liquidator of the
Company in accordance with section 34 of the IBC;
M. “Person” shall mean an individual, a partnership firm, an association, a corporation, a limited
company, a trust, a body corporate, bank or financial institution or any other body, whether
incorporated or not;
N. “Qualified Bidder(s)” shall mean a Bidder(s) whose bid fulfils the eligibility criteria and
who furnishes Earnest Money Deposit as listed in the E-Auction Sale Process Memorandum.
O. “SKNL” or “The Company” or “Corporate Debtor” S. Kumars Nationwide Limited in
Liquidation acting through the Liquidator;
P. “Seller” shall mean S. Kumars Nationwide Limited in Liquidation acting through the
Liquidator;
Q. “Successful Bidder(s)” or “Successful E-Auction Participant(s)” means, the Qualified
Bidder(s) whose bid is/are approved and who is/are declared successful by the Liquidator
after the auction;
Capitalized terms used herein but not defined otherwise shall have meaning assigned to them under
the provisions of the IBC and the rules and regulations framed thereunder.
________________________________________________________________________________________________________
6
3. BID PROCESS
1. This Document has been issued for the purpose of carrying out electronic auction (“E-
Auction”) of assets of SKNL under IBC and Liquidation Process Regulations.
2. All information provided in this document should be read together with the provisions of the
IBC and the Liquidation Process Regulations. In the event of a conflict between this
document and IBC or Liquidation Process Regulations, the provisions of the IBC or the
Liquidation Process Regulations, as the case may be, shall prevail.
3. The information contained in this document or subsequently provided to Bidder(s), whether
verbally or in documentary or any other form by or on behalf of the Liquidator, is provided
based on the terms and conditions set out in this document.
4. This document is neither an agreement nor an offer by the Liquidator to the prospective
Bidder(s) or any other person. The purpose of this document is to provide interested parties
with information that may be useful to them in making their bids pursuant to issue of this
document. The assumptions, assessments, statements and information contained in this
document may not be complete, accurate, adequate or correct. Each Bidder(s) should conduct
their own investigations, analysis and should check the accuracy, adequacy, correctness,
reliability and completeness of the assumptions, assessments, statements and information
contained herein.
5. Information provided in this document to the Bidder(s) has been collated from several
sources. The information given is not intended to be an exhaustive account of statutory
requirements and should not be regarded as complete. The Liquidator accepts no
responsibility for the accuracy or otherwise for any statement contained herein.
6. The Liquidator, makes no representation or warranty and shall have no liability to any
person, including any Bidder(s) under any law, statute, rules or regulations or tort, principles
of restitution or unjust enrichment or otherwise for any loss, damages, cost or expense
which may arise from or be incurred or suffered on account of anything contained in this
document or otherwise, including the accuracy, adequacy, correctness, completeness or
reliability of the document and any assessment, assumption, statement or information
contained therein or deemed to form part of this document or arising in any way from
participation in the E-Auction process.
7. The Liquidator accepts no liability of any nature howsoever caused arising from reliance of
any Bidder(s) upon the statements contained in this document
8. The Liquidator may in its absolute discretion, but without being under any obligation to do
so, update, amend or supplement the information, assessment or assumptions contained in
this document.
9. The issue of this document does not imply that the Liquidator is bound to select a Bidder(s)
as Successful Bidder(s) for the assets of the company and the Liquidator reserves the right to
reject all or any of the Bidder(s) or bids without assigning any reason whatsoever.
________________________________________________________________________________________________________
7
10. Each Bidder(s) shall bear all its costs and charges associated with or relating to the
preparation and submission of its bid and/ or participation in the E-Auction, including but not
limited to preparation, copying, postage, delivery fees, expenses associated with any
demonstrations or presentations which may be required by the Liquidator or any other costs
incurred in connection with or relating to its bid.
11. E-Procurement Technologies Limited (Auction Tiger) has been appointed as the E-Auction
Service Provider. The sale of the Properties shall be undertaken by the E-Auction Service
Provider for and on behalf of the Seller through an E-Auction platform provided on the
website portal of the E-Auction Service Provider (Platform). Other details with respect to the
e-auction are as follows:
Particulars Description
Type of Bid E-Auction
Seller SKNL represented by the Liquidator Mr. Om Prakash Agrawal,
E-Auction Service Provider E-Procurement Technologies Limited (Auction Tiger)
Website of E-Auction
Service Provider https://ncltauction.auctiontiger.net
Annexures and Formats
Annexure I – Affidavit and Undertaking
Annexure II – Bid Form (to be filled in and signed and
stamped by the Bidder(s) and uploaded)
Annexure III – Declaration by the Bidder(s) (duly filled in and
signed and stamped by the Bidder(s) and uploaded along with
the Bid form)
Annexure IV – Technical Terms and Conditions of E-Auction
Annexure V – Format of Letter of Intent
Annexure VI – Description of Assets
Special Instructions
Please note that this bidding is a serious matter and last-minute
bidding may lead to unnecessary lapses. Neither the E-Auction
Service Provider nor the Liquidator will be responsible for
any lapses on part of the Bidder(s)
12. All terms and conditions with respect to the sale of the Properties shall be governed by the
directions of the Liquidator, in accordance with the provisions of applicable laws and
directions of Hon’ble NCLT. As mandated by the Hon’ble NCLT, the Liquidator shall
exercise all rights with respect to sale of the Assets and it would be open to the Liquidator to
appoint such experts, professionals or other persons, as the Liquidator might think necessary,
so as to enable the sale of the Assets.
13. The liquidator may conduct multiple rounds of auctions to maximize the realization from the
sale of the assets, and to promote the best interests of the creditors.
14. The Annexures to this Document shall form an integral part hereof and this Document shall
always be read in conjunction with the Annexures hereto.
________________________________________________________________________________________________________
8
15. The title documents relating to the Properties shall be available for inspection, on request to
be made to the Liquidator, at 5th Floor, B2, Marathon Innova, Marathon Nextgen, G K Marg,
Lower Parel, Mumbai, 400 013 by contacting Mr. M. K. Wadhwa (M:+91 9867555613)
(Email: [email protected]).
16. This Document is neither transferable nor assignable.
________________________________________________________________________________________________________
9
4. ELIGIBILITY CRITERIA
Only those Bidder(s) who meet the eligibility criteria specified below may be considered / shortlisted
by the Liquidator to participate in the E-Auction Process. Bidder(s) which do not meet the said
eligibility criteria shall be rejected at the discretion of the Liquidator, without providing any reason
or incurring any liability. The liquidator reserves the right to revise eligibility criteria at any time.
Please note that any person submitting a bid under E-Auction Sale Process for SKNL shall not be a
person ineligible to be a resolution applicant in terms of the IBC including Section 29A of the Code.
An affidavit confirming eligibility to submit a bid for S. Kumars Nationwide Limited (in
Liquidation) shall be submitted along with EOI in the format as provided in “Annexure I”.
Criteria
A. Applicant shall not be an insolvent company / individual
B. Applicant should not have any negative track-record / history, i.e., Applicant should not have
defaulted on any resolution plan/liquidation sale under IBC or any other restructuring
mechanism
C. Applicant should not have been debarred during the CIRP tenure and this includes affiliates
or any restructuring / IBC cases in India
________________________________________________________________________________________________________
10
5. DOCUMENTS REQUIRED TO BE SUBMITTED TO ASCERTAIN ELIGIBILITY OF
THE BIDDER(S)
The E-Auction Sale Process Applicant(s) or the Bidder(s) would need to submit the following forms,
documents, authorizations by the Bidder(s):
A. Ownership Structure and Composition of the E-Auction Applicant(s) / Bidder(s), Proof of
Identification, Current Address Proof, PAN card, Valid Email ID, Landline and Mobile
Phone Number.
B. Authorization to the Signatory ( in case the Bidder(s) is the legal entity)
C. Affidavit and Undertaking by the E-Auction Sale Process Applicant(s) (through Authorized
Signatory in case the Bidder(s) is the legal entity). The format of Affidavit and Undertaking
is attached vide “Annexure I”
D. An Eligible Bidder(s) will need to submit the duly filled, signed and stamped Bid Application
Form attached vide “Annexure II” and duly filled, signed, and stamped Declaration by
Bidder(s) attached vide “Annexure III”
Upon verification of the eligibility of the E-Auction Sale Process Applicant(s), the said applicant
shall be informed to proceed further with due diligence / site visit and to submit Earnest Money
Deposit as per the terms of the E-Auction Sale Process Memorandum.
Interested Applicants can submit the eligibility documents immediately upon receipt of E-Auction
Sale Process Memorandum.
Further, it should be noted that at any stage of the E-Auction process, the Liquidator may request the
prospective Bidder(s) to submit additional documents to evaluate their eligibility.
________________________________________________________________________________________________________
11
6. PHYSICAL VERIFICATION AND SITE VISIT
Upon written request from Eligible Bidder(s), the Liquidator shall facilitate inspection / physical
verification and site visit of the Property and Assets of the Company preferably during January 20,
2020 to January 27, 2020. The properties can be inspected by the prospective Bidder(s) at the site
with prior appointment contacting Mr. M. K. Wadhwa (M:+91 9867555613) (Email:
The Liquidator may arrange a discussion meeting prior to Site visit of the Property and Assets at any
time prior to the closure of the e-auction process, if such meeting is considered necessary by the
Liquidator.
________________________________________________________________________________________________________
12
7. DUE DILIGENCE
The Liquidator shall provide necessary assistance for conduct of due diligence by eligible bidders.
The information and documents shall be provided by the Liquidator in good faith. The documents
shall be kept in an Online Data Room. Access to the Data Room shall be provided on signing the
Confidentiality Agreement. The Bidder(s) may note that the Liquidator would not have verified any
of the information, data or documents shared and shall not accept any responsibility or liability,
whatsoever, in respect of any statements or omissions contained in the shared data.
The intending bidders, prior to submitting their bid, should make their independent inquiries
regarding the title of the property, zone of the land, dues of local taxes, electricity and water charges,
development charges, maintenance charges, if any and inspect the property at their own expenses
and satisfy themselves.
For any assistance in carrying out the due diligence Mr. M. K. Wadhwa (M:+91 9867555613)
(Email: [email protected]) may be contacted.
________________________________________________________________________________________________________
13
8. ASSETS TO BE AUCTIONED AND RESERVE PRICE
SKNL proposes sale of High Value Fine Cotton Fabric Manufacturing Unit at Bharuch (Gujarat)
business as a going concern which includes Leasehold Land, and Freehold Land, Factory Building,
Plant and Machinery, Furniture and Fixtures and net current assets pertaining to the Unit [Current
Assets – Current Liabilities (Refer to liabilities accrued on or after the commencement of Corporate
Insolvency Resolution Process i.e. April 24, 2018)] and the Brands/ Trademarks owned by SKNL
along with licences, permits, approvals and registrations to the extent they are transferable under the
applicable law on “As is where is basis”, “As is what is basis”, “Whatever there is basis”, and
“No recourse basis”. The proposed sale of assets of the Company does not entail transfer of any title
except the title which the Company had on its assets as on date of transfer of the Unit.
Given below is a list of assets to be auctioned along with their Reserve prices
Lot Nature of
Asset Description
Reserve Price
(INR Crores)
Earnest Money
Deposit
(INR Crores)
1
Leasehold
Land
Part of Plot no. 825 of Jhagadia GIDC,
Bharuch in the village Dadheda,
Jhagadia Taluka, Bharuch District,
Gujarat having a total land area of 42.04
acres / 1,70,133 sq. mt. or 18,31,294 sq.
ft. This land is leasehold from GIDC
and is subject to sub-division of said
Plot.
201.80 20.18
Factory
building
Plant building along with ancillary
structures having total built up area of
61,994 sq. mt. or 6,67,298 sq. ft. This
also includes land developments in form
of boundary walls, Sewage line,
streetlights, internal roads etc.
Plant and
Machinery
Plant and Machinery which includes all
the machineries installed for
manufacturing of fabric as well as
equipment installed in utility such as
boiler, DG set, ETP, STP etc. This also
includes furniture & fixture, office
equipment, Computers and vehicles.
Brands Brands as owned by S. Kumars
Nationwide Limited
Net Current
Assets
Net Current Assets (Current Assets less
Current Liabilities) amounting to Rs 5
crore approx. as on date. The Current
Assets will not include the Debtors /
Claims which are under litigation as on
date of transfer of Unit.
Payable at book value additionally as
on date of transfer of Unit.
________________________________________________________________________________________________________
14
Kindly note that the Bidder(s) cannot place a bid for the Assets at a value below the Reserve
price
Further, the Bidders can increase their Bid by a minimum incremental amount of Rs. 50,00,000
for Lot No. 1.
Please find appended the details of underlying Assets in “Annexure VI”
Cognizance should be taken of the fact that the liquidator does not give any assurance or warranty of
the physical condition of assets and their suitability for any sort of operation that the bidder
envisages.
________________________________________________________________________________________________________
15
9. E-AUCTION DETAILS
Given below are the details pertaining to the proposed E-Auction
A. E-Auction date: February 6, 2020 from 11.00 am to 1.00 pm
In case, a bid is placed in the last 10 minutes of the closing time of the E-auction, the closing
time will automatically get extended for 10 minutes with unlimited extensions.
B. Last date for submission of EOI, Eligibility Documents and EMD: February 3, 2020 till 5.00 PM
C. For any technical support in bidding process please contact: Mr. Vijay Shetty - +91 9619002431/
6352490773 / E-Mail: [email protected]
________________________________________________________________________________________________________
16
10. EARNEST MONEY DEPOSIT
All E-Auction Participant(s), along with or prior to the submission of their Bids, shall deposit INR
20,18,00,000 (INR Twenty Crores Eighteen Lakhs Only) for Lot No. - 1, as earnest money
(“Earnest Money Deposit” or “EMD”).
The Earnest Money shall be provided by way of a Demand Draft issued by any scheduled
commercial bank in India in favour of “S. Kumars Nationwide Limited- In Liquidation”.
Earnest Money may also be provided by the E-Auction Participant(s) by way of direct bank transfer
(RTGS / NEFT) to the bank account specified below. No interest will be paid to the E-Auction
Participant(s) in relation to the amount deposited as Earnest Money. In this regard, the following
must be noted
A. Earnest Money is to be paid by the Bidder(s) prior to uploading the online bid form.
B. The details for bank transfer of the Earnest Money are as follows:
Account Number: 0187102000006224
Beneficiary Name: S. Kumars Nationwide Limited - In Liquidation
Bank Name: IDBI Bank Limited
Branch: Lower Parel
IFSC Code: IBKL0000187
C. Earnest Money is required to be paid by way of NEFT/RTGS in name of “S. Kumars
Nationwide Limited - In Liquidation” latest by Monday, February 3, 2020 till 5.00 pm. In case
of payment by Bank Demand Draft, the payment of Earnest Money is required to be deposited
by January 29, 2020.
D. The details of any remittances in this regard shall be entered in the online form submitted by the
Bidder(s). The entire Earnest Money amount shall be remitted by the Bidder(s) from bank
account owned by the Bidder(s).
E. Bidder(s) shall preserve the remittance challan and shall produce the same in front of the
Liquidator as and when demanded.
F. All payment made by the Bidder(s) under the e-auction shall be intimated to the Liquidator at
The Entire Amount paid by the bidder including the Earnest Money Deposit can be forfeited
at any time, upon the occurrence of any of the following events:
A. If any of the conditions under this Document are breached by the E-Auction Participant(s) or in
case the E-Auction Participant(s) is / are found to have made any misrepresentation; or
B. If the E-Auction Participant(s) is / are found to be ineligible to submit the bid under Section 29A
of the IBC (as amended from time to time) or is / are found to have made a false or misleading
declaration of eligibility under Section 29A of the IBC (as amended from time to time); or
C. If the E-Auction Participant(s) is / are identified as the Successful Bidder(s) and it fails to pay
balance sale consideration as per terms of the sale.
________________________________________________________________________________________________________
17
Adjustment of Earnest Money of the Successful Bidder(s)
The Earnest Money shall be allowed to be set-off against or used as part of the consideration in the
final payment only.
________________________________________________________________________________________________________
18
11. DECLARATION OF SUCCESSFUL BIDDER(S)
The Liquidator shall determine and at his sole discretion (which discretion shall not be used
arbitrarily), declare at the end of the E-Auction, the Successful Bidder(s) for any asset lot(s).
Determination of the Successful Bidder(s) shall be done on the basis of highest bid (not below the
reserve price) received for each Lot of assets via the E-Auction, unless the Liquidator determines,
acting reasonably, that the highest bidder shall not be identified as the Successful Bidder.
Where the Earnest Money has been provided by means of a remittance to the Company’s bank
account or by Demand Draft, such funds will be retained by the Liquidator as part payment of the
consideration that the Successful Bidder has agreed to pay for the relevant asset lot(s).
The Liquidator is not bound to accept the highest offer and has the absolute right to accept or reject
any or all offer(s) or adjourn / postpone / cancel the e-Auction or withdraw any asset lot or portion
thereof from the E-Auction proceedings at any stage without assigning any reason there for.
Return of Earnest Money Deposit of unsuccessful bidders
The Earnest Money Deposit of unsuccessful bidders will be returned within 7 days from the date of
declaration of the Successful Bidder. .
Issuance of Letter of Intent
The Liquidator shall, as soon as reasonably possible following the end of the E-Auction, but not
more than 7 days from the end of E-Auction, issue to the Successful Bidder a letter of intent (“ LoI”/
“Letter of Intent”), as per Annexure V inviting the Successful Bidder to provide balance sale
consideration (plus any applicable GST & other applicable charges, if any, on 100% of the bid sum)
within 90 (ninety) days of the date of issuance of the LoI,. This LoI per se does not confirm sale in
favour of the Successful Bidder. Confirmation of sale is subject to the fulfilment of terms and
conditions of E-Auction Sale and approval of the Liquidator.
The Successful Bidder shall, within a period of 2 (two) days from the date of issuance of the LoI,
unconditionally accept the LoI, and record such acceptance by providing the Liquidator with 1 (one)
copy of the LoI with an endorsement stating that such LoI is, “Accepted Unconditionally”, under the
signature of the authorized Director / Authorized Signatory of the Successful Bidder.
Failure to accept the LoI within the time period specified may result in the disqualification of the
Successful Bidder along with cancellation of the LoI and forfeiture of the Earnest Money.
Payment of Sale Consideration
The Successful Bidder(s) shall deposit the balance sale consideration within 90 (ninety) days from
the date of such demand. Provided that the payments after 30 (thirty) days shall attract interest at the
rate of 12% p.a. Provided further that the sale shall be cancelled if full payment is not received
within 90 (ninety) days.
________________________________________________________________________________________________________
19
Completion of Sale
On payment of the full amount of sale consideration and any applicable taxes & levies (if any), the
sale shall stand completed, and the Liquidator shall execute Certificate of sale or Sale deed and the
assets shall be delivered to the Successful Bidder. The Certificate of sale or Sale deed will be issued
and /or transaction / sale documents will be executed in the name of the Successful Bidder only and
will not be issued in any other name(s). It is expressly stipulated that there are no implied obligations
on the part of the Liquidator to do all acts, things and deeds whatsoever for the completion of the
sale.
Default in payment of the balance sale consideration and any applicable GST, if any, on 100% of the
bid sum by the Successful Bidder will result in disqualification of the Successful Bidder including
forfeiture of Earnest Money. The asset lot(s) may be put to re-auction or sold to the next highest
Qualified Bidder and the defaulting Successful Bidder shall have no claim/right in respect of such
asset lot.
________________________________________________________________________________________________________
20
12. FRAUDULENT AND CORRUPT PRACTICES
The E-Auction Participant(s) shall observe the highest standard of ethics during the E-Auction Sale
Process and subsequently during the closure of the E-Auction Sale Process and declaration of
Successful Bidder(s). Notwithstanding anything to the contrary, contained in this Document, or in
the Letter of Intent, the Liquidator shall reject an auction bid, revoke the Letter of Intent, as the case
may be, without being liable in any manner whatsoever to the E-Auction Participant(s), if the
Liquidator, at his discretion, determines that the E-Auction Participant(s) has, directly or indirectly
or through an agent, engaged in corrupt practice, fraudulent practice, coercive practice, undesirable
practice or restrictive practice in the E-Auction Sale Process or has, undertaken any action in respect
of such process which results in the breach of any Applicable Law including the Prevention of
Corruption Act, 1988. In such an event, the Liquidator may invoke the Earnest Money, without
prejudice to any other right or remedy that may be available under this Document or Applicable
Law.
For the purposes of this Clause the following terms shall have the meaning hereinafter
respectively assigned to them:
“Coercive practice” shall mean impairing or harming, or threatening to impair or harm, directly or
indirectly, any person or property to influence any person’s participation or action in the auction
Process;
“Corrupt practice” shall mean (i) the offering, giving, receiving, or soliciting, directly or
indirectly, of anything of value to influence the actions of any person connected with the auction
Process (for avoidance of doubt, offering of employment to or employing or engaging in any manner
whatsoever, directly or indirectly, any official of the Liquidator or the Company, who is or has been
associated or dealt in any manner, directly or indirectly with the auction Process or arising there
from, before or after the execution thereof, at any time prior to the expiry of 1 (one) year from the
date such official resigns or retires from or otherwise ceases to be in the service of the Liquidator or
the Company, shall be deemed to constitute influencing the actions of a person connected with the
auction Process); or (ii) engaging in any manner whatsoever, during the auction Process or
thereafter, any person in respect of any matter relating to the Company, who at any time has been or
is a legal, financial or technical adviser of the Liquidator or the Company, in relation to any matter
concerning the auction process;
“Fraudulent practice” shall mean a misrepresentation or omission of facts or suppression of facts
or disclosure of incomplete facts, in order to influence the auction Process;
“Restrictive practice” shall mean forming a cartel or arriving at any understanding or arrangement
among the E-Auction Participant(s) with the objective of restricting or manipulating a full and fair
competition in the auction Process; and
________________________________________________________________________________________________________
21
“Undesirable practice” shall mean (i) establishing contact with any person connected with or
employed or engaged by the liquidator with the objective of canvassing, lobbying or in any manner
influencing or attempting to influence the auction Process; or (ii) having a Conflict of Interest.
The Bidder(s) shall not involve himself or any of his representatives in price manipulation of any
kind directly or indirectly by communicating with other Bidder(s). The Bidder(s) shall not divulge
either his bid or any other details provided to him by the Liquidator or during the due diligence
process in respect of the asset to any other party. Prior to conduct of due diligence/ site visits, the
Liquidator may require the Bidder(s) to execute confidentiality agreement with the Company/
Liquidator.
________________________________________________________________________________________________________
22
13. COSTS, EXPENSES AND TAX IMPLICATIONS
The Auction Participant(s) shall be responsible for all the costs incurred by it on account of its
participation in the E-Auction Process, including any costs associated with participation in the
discussion Meeting (if any), Site Visit, etc. The Liquidator shall not be responsible in any way for
such costs, regardless of the conduct or outcome of the E-Auction Process.
For purpose of abundant clarity, it is hereby clarified that the E-Auction Participant(s) is / are
expected to make its own arrangements including accommodation for the discussion Meeting (if
organised) or Site Visit and all costs and expenses incurred in that relation shall be borne by the E-
Auction Participant(s).
All expenses incurred towards movement / shifting of plant & machinery(ies) or any asset of the
Company post the E-Auction Sale Process should be borne by the Buyer. The Liquidator shall not be
held responsible / liable to pay any expenses towards such movement of plant & machinery(ies) or
any asset of the Company.
The E-Auction Participant(s) shall not be entitled to receive re-imbursement of any expenses which
may have been incurred on account of carrying out due diligence, search of title to the assets and
matters incidental thereto or for any purpose in connection with the E-Auction Sale Process plan.
A. The Successful Bidder shall bear all the necessary expenses like applicable stamp duties/
additional stamp duty/ registration charges, transfer charges, sub-division charges, notified area
charges (applicable to Successful bidder of Lot No. 1), conversion charges, premium, fees, etc.
for transfer of property(ies) in name of the Successful Bidder(s)
B. The Successful Bidder/s shall bear the sub-division charges of land payable on land area
proportionate to area in Lot No.1. The Liquidator shall apply for sub-division of GIDC plot after
issuance of LoI to the Successful Bidder/s and such Bidder/s shall pay the amount of sub-division
charges within 10 days from the date of demand. In case, the bid succeeds only for one of the Lot
No. 1, the Successful bidder shall initially pay full amount of sub-division charges and said
Successful Bidder shall be given due set off for the excess amount, in subsequent payments/ final
payment.
C. The Successful Bidder shall bear the cess or other applicable taxes i.e. GST, TDS etc.
The E-Auction Participant(s) shall be responsible for fully satisfying the requirements of the IBC
and related Regulations as well as all Applicable Laws that relevant for the sale process. The Buyer
shall be responsible for obtaining requisite regulatory or statutory or third-party approvals, no-
objections, permission or consents, if any, that are or may be required under Applicable Law for
purchasing the relevant assets.
________________________________________________________________________________________________________
23
14. GOVERNING LAW AND JURISDICTION
This Document, the E-Auction Sale Process Memorandum and the other documents pursuant to this
Document shall be governed by the laws of India and any dispute arising out of or in relation to this
Document or the shall be subject to the exclusive jurisdiction of the Adjudicating Authority, courts
and tribunals at Mumbai, India.
________________________________________________________________________________________________________
24
15. TIMELINE
Given below is the Timeline for the E-Auction Sale Process :
Sr. No. Event Timeline (Days)
1.
Public Announcement and Opening of
Auction Portal and E-Auction Sale Process
Memorandum document made available on
the websites as per Terms and Conditions
December 12, 2019
Corrigendum dated January 15, 2020
2.
Last date for submission of EOIs including
KYC, Eligibility criteria documents and
EMD
February 3, 2020 till 5.00 PM.
In case the payment is done by way of
DD, the EMD shall be submitted latest by
January 29, 2020.
3. E-Auction Date and Time
February 6, 2020 from 11.00 am to 1.00
pm (In case, a bid is placed in the last 10
minutes of the closing time of the E-
auction, the closing time will
automatically get extended for 10 minutes
with unlimited extensions).
4. Letter of Intent (LOI) to be issued to the
Successful Bidder Within 7 days from close of the e-auction
5 Unconditional acceptance of LOI by the
Successful Bidder
Within 2 days from issuance of the LOI
by the Liquidator
6 Payment of Sale consideration by
Successful Bidder(s)
The Successful Bidder(s) shall deposit the
entire sale consideration within 90
(ninety) days from the date of such
demand. Provided that the payments after
30 (thirty) days shall attract interest at the
rate of 12% p.a. Provided further that the
sale shall be cancelled if full payment is
not received within 90 (ninety) days.
7 Return of Earnest Money (EMD) for
Unsuccessful Bidder(s) On or before February 13, 2020
________________________________________________________________________________________________________
25
Note: The Liquidator reserves the right to amend the key terms of the E-Auction Sale Process
including reserve price, earnest money deposit, bid increment amounts and timelines at his sole
discretion, to the extent permissible under the applicable laws and regulations.
Any information about amendments / extension of any of the timelines will be available on the E-
Auction website and communicated to Eligible Bidder(s).
________________________________________________________________________________________________________
26
16. DISCLAIMER
This document is issued by Mr. Om Prakash Agrawal, the Liquidator for general information
purposes, to provide general information only, without regard to specific objectives, suitability,
financial situations and the requirements of any particular person. The purpose of this document is
to set out the process for submitting E-Auction bids for the assets of S. Kumars Nationwide Limited
(in liquidation) in accordance with the IBC. Nothing herein or in materials relating to this
Document is intended to be construed as legal, financial, accounting, regulatory or tax advice by the
Liquidator. This Document is personal and specific to each E-Auction Participant. Neither this
Document nor anything contained herein shall form the basis of, or be relied upon in connection
with any contract, agreement, undertaking, understanding or any commitment whatsoever. This
Document does not solicit any action based on the material contained herein.
The information in this Document, which does not purport to be comprehensive, is provided by the
Company and has not been independently verified by the Liquidator. While this information has been
prepared in good faith, no representation or warranty, expressed or implied, is or will be made and
no responsibility or liability is or will be accepted by the Liquidator, the Company or by any of its
officers, employees or agents in relation to the accuracy, fairness, authenticity or completeness of
this Document or any other written or oral information made available to any interested party or its
advisers and any such liability is expressly disclaimed. In so far as the information contained in this
Document includes current or historical information, the accuracy, adequacy, authenticity,
correctness, fairness, and completeness of such information cannot be guaranteed. By acceptance of
this Document, the E-Auction Participant(s) shall be deemed to have acknowledged that it has not
relied upon any representation and warranty made by the Liquidator. This document has not been
filed, registered or approved and will or may not be filed, registered, reviewed or approved by any
statutory or regulatory authority in India or by any stock exchange in India or any other jurisdiction.
This Document has not been approved, reviewed or recommended by SEBI.
This Document and information contained herein or disclosed pursuant to the terms of this
Document or any part of it does not constitute or purport to constitute any advice or information in
publicly accessible media and should not be printed, reproduced, transmitted, sold, distributed, or
published by the recipient without prior written approval from the Liquidator. Distributing or taking
/ sending / dispatching / transmitting this Document in certain foreign jurisdictions may be restricted
by law, and Persons into whose possession this Document comes should inform themselves about,
and observe, any such restrictions. Neither the Liquidator, nor his professional advisors, affiliates,
directors, employees, agents, representatives or managers of the process shall be liable for any
damages, whether direct or indirect, incidental, special or consequential including loss of revenue
or profits that may arise from or in connection with the use of this Document, including for the E-
Auction Participant(s) not being selected as a Successful Bidder(s) or on account of any decision
taken by the Liquidator.
The Liquidator and/or the Company give no undertaking to provide the recipient with access to any
additional information or to update this Document or any additional information, or to correct any
inaccuracies in it which may become apparent, and they reserve the right, without giving reasons, at
________________________________________________________________________________________________________
27
any time and in any respect, to amend or terminate the procedures set herein or to terminate
negotiations with any auction process applicant. The issue of this Document shall not be deemed to
be any form of commitment on the part of the Liquidator or the Company to proceed with any
transaction.
In addition to the provisions set out in this Document, the E-Auction Sale Process applicant(s) shall
be responsible for fully satisfying the requirements of the IBC and related Regulations as well as all
laws in force that are or may be applicable to the applicant or the sale process and for obtaining
requisite regulatory or other approvals, if any, that are or may be required under applicable law
and nothing contained in this Document shall be deemed to relieve, wholly or partially, directly or
indirectly, the auction process applicant from compliance with the IBC and related Regulations as
well as any other law in force, and/ or any instrument having the force of law as may be applicable
and nothing in this Document shall be construed as, or operate either, wholly or in part, as
exempting the E-Auction Sale Process Applicant(s) from complying with all such laws, as are or may
be applicable.
By procuring a copy of this Document, the recipient accepts the terms of this disclaimer notice,
which forms an integral part of this Document and all other terms and conditions of this Document.
Further, no Person, including the E-Auction Participant(s) shall be entitled under any law, statute,
rules or regulations or tort, principles of restitution or unjust enrichment or otherwise to claim for
any loss, damage, cost or expense which may arise from or be incurred or suffered on account of
anything contained in this Document or otherwise, including the accuracy, adequacy, authenticity,
correctness, completeness or reliability of the information or opinions contained in this Document
and any assessment, assumption, statement or information contained therein or deemed to form part
of this Document, and the Liquidator, Company, and their advisors, affiliates, directors, employees,
agents, representatives or managers do not have any responsibility or liability for any such
information or opinions and therefore, any liability or responsibility is hereby expressly disclaimed.
In no circumstances shall the E-Auction Participant(s) or its officers, employees, agents and
professional advisers make any contact, direct or indirect, by any mode whatsoever, with the
management, employees, customers, agents or suppliers of the Company until the Liquidator gives
permission to do so in writing.
The assets of the Company are proposed to be sold on “As is where is basis”, “As is what is basis”,
“Whatever there is basis” and “No recourse” basis and the proposed sale of assets of the Company
does not entail transfer of any title except the title which the Company had on its assets as on date of
transfer. The Liquidator does not take or assume any responsibility for any shortfall or defect or
shortcoming in the moveable / immoveable assets of the Company.
________________________________________________________________________________________________________
28
17. ANNEXURES
A. ANNEXURE I
FORMAT FOR AFFIDAVIT AND UNDERTAKING CONFIRMING ELIGIBILITY UNDER
SECTION 29A OF IBC
<<to be executed on Rs.100 stamp paper and notarized>>
Date: [●]
Mr. Om Prakash Agrawal
Liquidator of S. Kumars Nationwide Limited
IBBI Registration no: IBBI/IPA-001/IP-P00201/2017-18/10444
I-21/22, Paragon Centre, Pandurang Budhkar Marg, Worli, Mumbai - 400013.
Sub: Affidavit and Undertaking by [●] on eligibility of [●] under Section 29A of the
Insolvency and Bankruptcy Code, 2016.
Dear Sir,
I [Insert name of the authorized person of the EOI Applicant], son of/ daughter of [●], aged
about [●] years, currently residing at [Address to be inserted] and having Aadhaar / Passport
number [●], an authorised officer of [name of the EOI Applicant] having [registered] office at
[ ] (“EOI Applicant”) , a term which also
includes any person acting jointly with the EOI Applicant), on behalf of the EOI Applicant, do
solemnly affirm and state to Mr. Om Prakash Agrawal, the Liquidator of S. Kumars
Nationwide Limited (“Company/Corporate Debtor”) as follows:
1. That the EOI Applicant or any person acting jointly with the EOI Applicant or in concert
with EOI Applicant or any person who is a ‘connected person’ (as defined under the
Insolvency and Bankruptcy Code, 2016 (“Code”),
a) Is eligible to be a resolution applicant as per its meaning under the Code;
b) Is not an un-discharged insolvent;
c) Is not a wilful defaulter in accordance with the guidelines of the Reserve Bank of India
issued under the Banking Regulation Act, 1949 (10 of 1949);
d) at the time of submission of the EOI and the bid, doesn’t have an account, or an account
of a corporate debtor under the management or control of such person or of whom such
person is a promoter, classified as non-performing asset in accordance with the
guidelines of the Reserve Bank of India issued under the Banking Regulation Act 1949
(10 of 1949) or the guidelines of a financial sector regulator issued under any other law
for the time being in force and at least a period of one year has lapsed from the date of
such classification till the date of commencement of the liquidation process of the
corporate debtor:
________________________________________________________________________________________________________
29
Provided that the person shall be eligible to submit a bid if such person makes payment
of all overdue amounts with interest thereon and charges relating to non-performing
asset accounts before submission of bid;
Provided further that nothing in this clause shall apply to EOI Applicant where such
applicant is a financial entity and is not a related party to the corporate debtor.
Explanation I. - For the purposes of this proviso, the expression "related party" shall
not include a financial entity, regulated by a financial sector regulator, if it is a
financial creditor of the corporate debtor and is a related party of the corporate debtor
solely on account of conversion or substitution of debt into equity shares or
instruments convertible into equity shares, prior to the insolvency commencement date.
Explanation II.— For the purposes of this clause, where a resolution applicant has an
account, or an account of a corporate debtor under the management or control of such
person or of whom such person is a promoter, classified as non-performing asset and
such account was acquired pursuant to a prior resolution plan approved under this
Code, then, the provisions of this clause shall not apply to such resolution applicant for
a period of three years from the date of approval of such resolution plan by the
Adjudicating Authority under this Code.
e) Has not been convicted for any offence punishable with imprisonment
(i) for two years or more under any Act specified under the Twelfth Schedule;
or
(ii) for seven years or more under any law for the time being in force
Provided that this clause shall not apply to a person after the expiry of a period of two
years from the date of his release from imprisonment. Provided further that this clause
shall not apply in relation to a connected person referred to in clause (iii) of Explanation
I;
f) Is not disqualified to act as a director under the Companies Act, 2013 (18 of 2013):
Provided that this clause shall not apply in relation to a connected person referred to in
clause (iii) of Explanation I;
g) Is not prohibited by the Securities and Exchange Board of India from trading in
securities or accessing the securities markets;
h) Has not been a promoter or in the management control of a corporate debtor in which a
preferential transaction, undervalued transaction, extortionate credit transaction or
fraudulent transaction has taken place and in respect of which an order has been made
by the Adjudicating Authority under this Code; Provided that this clause shall not
apply if a preferential transaction, undervalued transaction, extortionate credit
transaction or fraudulent transaction has taken place prior to the acquisition of the
corporate debtor by the resolution applicant pursuant to a resolution plan approved
under this Code or pursuant to a scheme or plan approved by a financial sector
regulator or a court, and such E-Auction Sale Process Applicant has not otherwise
contributed to the preferential transaction, undervalued transaction, extortionate credit
transaction or fraudulent transaction;
________________________________________________________________________________________________________
30
i) Has not executed a guarantee in favour of a creditor in respect of a corporate debtor
against which an application for insolvency resolution made by such creditor has been
admitted under this Code and such guarantee has been invoked by the creditor and
remains unpaid in full or part;
j) subject to any disability, corresponding to clauses (a) to (h), under any law in a
jurisdiction outside India; or
k) does not have a connected person not eligible under clauses (a) to(i)
Explanation I - For the purposes of this clause, the expression “connected person” means
I. Any person who is the promoter or in the management or control of the E-Auction
Sale Process applicant; or
II. Any person who shall be the promoter or in management or control of the assets of
the Company pursuant to sale thereof as part of the liquidation process of the
Company; or
III. The holding company, subsidiary company, associate company or related party of a
person referred to in clauses (i) and (ii)
Provided that nothing in clause (iii) of this Explanation I shall apply to EOI Applicant where
such applicant is a financial entity and is not a related party of the corporate debtor,
Provided further that the expression "related party" shall not include a financial entity,
regulated by a financial sector regulator, if it is a financial creditor of the corporate debtor and
is a related party of the corporate debtor solely on account of conversion or substitution of debt
into equity shares or instruments convertible into equity shares, prior to the insolvency
commencement date
Explanation II—For the purposes of this section, "financial entity" shall mean the following
entities which meet such criteria or conditions as the Central Government may, in consultation
with the financial sector regulator, notify in this behalf, namely: —
(a) a scheduled bank;
(b) any entity regulated by a foreign central bank or a securities market regulator or other
financial sector regulator of a jurisdiction outside India which jurisdiction is compliant
with the Financial Action Task Force Standards and is a signatory to the International
Organisation of Securities Commissions Multilateral Memorandum of Understanding;
(c) any investment vehicle, registered foreign institutional investor, registered foreign
portfolio investor or a foreign venture capital investor, where the terms shall have the
meaning assigned to the min regulation 2 of the Foreign Exchange Management (Transfer
or Issue of Security by a Person Resident Outside India) Regulations, 2017 made under the
Foreign Exchange Management Act, 1999 (42 of1999);
(d) an asset reconstruction company register with the Reserve Bank of India under section 3 of
the Securitisation and Reconstruction of Financial Assets and Enforcement of Security
Interest Act, 2002 (54 of 2002);
________________________________________________________________________________________________________
31
(e) an Alternate Investment Fund registered with Securities and Exchange Board of India;
(f) such categories of persons as may be notified by the Central Government.”
2. That the EOI Applicant unconditionally and irrevocably undertakes that it shall provide
all data, documents and information as may be required to verify the statements made
under this affidavit.
3. That in the event any of the above statements are found to be untrue, incomplete or
incorrect, then the EOI Applicant unconditionally agrees to indemnify and hold
harmless the Liquidator against any losses, claims or damages incurred by the
Liquidator on account of such ineligibility of the EOI Applicant.
4. That the list of the connected persons of the EOI Applicant set out in hereto is
exhaustive and complete in all respects and the names of all the connected persons of the
EOI Applicant have been set out thereunder without any omission whatsoever
5. I declare and undertake that in case [name of EOI Applicant or the person acting jointly
with it or any of the connected person(s)] becomes ineligible at any stage during the
Liquidation Process; it would inform the Liquidator forthwith on becoming ineligible.
6. I also undertake that in case [name of EOI Applicant or the person acting jointly with it
or any of the connected person(s)] becomes ineligible at any time during the auction/bid
process for sale of assets of the Company including after submission of Earnest Money
Deposit (“EMD”) towards bid, then the EMD would be forfeited and the same would be
deposited in the account of S. Kumars Nationwide Limited – in liquidation
7. I also further undertake that my bid Amount will remain binding unless rejected by the
Liquidator.
8. I confirm that the said declaration and disclosure is true and correct, and I agree to
compensate the Liquidator for any cost incurred in relation to ascertaining the veracity
of this declaration.
9. I am duly authorized to submit this declaration by virtue of [●]. The said document is
true, valid and genuine to the best of my knowledge, information and belief.
(DEPONENT)
________________________________________________________________________________________________________
32
VERIFICATION
I, the deponent above, do hereby solemnly declare and affirm that the above statement given
by me is true and correct to the best of my knowledge and belief and nothing stated above is
false or misrepresentation or misleading.
(DEPONENT)
________________________________________________________________________________________________________
33
B. ANNEXURE II
BID APPLICATION FORM
(Please fill up separate Bid application forms for each property)
Date:
Dear Sir,
I am desirous in participating in the E-Auction of High Value Cotton Fabric Manufacturing
Unit at Bharuch (Gujarat) owned by S Kumars Nationwide Limited-In Liquidation as going
business forming part of Liquidation Estate formed by the Liquidator, appointed by the
Hon’ble National Company Law Tribunal, Mumbai Bench vide order dated June 19, 2019.
Details of Corporate Debtor:
Name S Kumars Nationwide Limited – In Liquidation
Account Number 0187102000006224
Bank Name IDBI Bank Limited
Branch Lower Parel
IFSC Code IBKL0000187
Details of Bidder(s)
Name of the Bidder
Constitution of Bidder
Contact No.
Email ID
PAN No.
Details of Division / Asset:
Lot No. / Block of Assets in sale notice for which Earnest
Money deposited
________________________________________________________________________________________________________
34
I/ We/M/s. also enclose copies of the required KYC documents. We request you to kindly
verify the same and arrange with the auction portals for issue of an ID and password for us to
enable us to take part in the E- Auction.
Place:
Date:
Signature
(Seal in case of company / firm)
Terms and Conditions of the E-auction are as under:
In addition to the Process Memorandum, following terms and conditions apply:
1. E-Auction will be conducted on “As is where is basis”, “As is what is basis”, “Whatever
there is basis”, and “No recourse basis” through approved service provider M/s e-
procurement Technologies Limited (Auction Tiger)
2. The complete E- Auction Process Memorandum containing Terms and Conditions of E-
Auction, E- Auction Bid form, Eligibility Criteria, Declaration by Bidders, Description of
Assets etc. are available on website https://ncltauction.auctiontiger.net Contact: Mr. Vijay
Shetty at +91 9619002431 / 6352490773 or email at [email protected]. (On going
to the https://ncltauction.auctiontiger.net, interested bidders will have to search for the
mentioned company using either one of the two options, (i) Company’s name (S Kumars
Nationwide Limited) or by (ii) State and property type)
3. The intending bidders are required to deposit Earnest Money Deposit (EMD) amount by
Monday i.e. January 13, 2020 till 5.00 PM either through NEFT/RTGS in the Account of “S.
Kumars Nationwide Limited - In Liquidation”, Account No.: 0187102000006224, IDBI Bank,
Branch: Lower Parel, Mumbai, IFSC Code – IBKL0000187, drawn on any Scheduled Bank.
Payment of EMD by Bank DD is required to be deposited by January 8, 2020.
4. The Name of the intending Bidders eligible to participate in e-auction on the portal
(https://ncltauction.auctiontiger.net) shall be identified by the Liquidator and the E-auction
service provider (Auction tiger) will provide User ID and password by email to eligible
bidders.
5. The EMD of the Successful Bidder shall be allowed to be set-off against or used as part of the
sale consideration in the final payment only and the EMD of unsuccessful bidders shall be
refunded with 7 (seven) days.
6. The Successful Bidder shall bear the applicable stamp duties/transfer charge, fees etc. and all
the statutory / non- statutory dues, taxes, rates, assessment charges, fees etc. in respect of the
property put on auction.
7. The sale certificate/agreement will be issued in the name of the successful bidder only and will
not be issued in any other name.
8. The Eligible Bidders, participating in the E-Auction, will have to bid for at least the Reserve
Price, and increase their bid by a minimum incremental amount as mentioned in the table
above.
________________________________________________________________________________________________________
35
9. The Liquidator has the absolute right to accept or reject any or all offer(s) or
adjourn/postpone/cancel the e- Auction or withdraw any property or portion thereof from the
auction proceeding at any stage without assigning any reason thereof.
10. The sale shall be subject to provisions of Insolvency and Bankruptcy Code, 2016 and
Regulations made there under.
11. E-auction date & Time: Thursday, January 16, 2020 at 11.00 am to 1.00 pm (with unlimited
extension of 10 min)
12. The Bidders should make their own Independent inquiries regarding the encumbrances, title
of assets put on auction and claims/rights/dues/ affecting the assets and should conduct
their own prior to submitting their bid. The E-Auction advertisement does not constitute and
will not be deemed to constitute any commitment or any representation of the Liquidator. The
property is being sold with all the existing and future encumbrances/ claims/ dues/demands
whether known or unknown to the Liquidator. Liquidator shall not be responsible in any of way
for any third-party claims/rights/dues.
13. It should be the responsibility of the interested bidders to inspect and satisfy themselves about
the property before submission of the bid.
14. Liquidator has right to demand documents from bidder for the process and in case the
documents are not provided, the liquidator may disqualify the bid.
15. The e-Auction/ bidding of above properties would be conducted exactly on the schedule Date
& Time as mentioned against each property by way of inter-se bidding amongst the bidders.
The bidder may improve their offer in multiple of amount mentioned under the column “Bid
Increment Amount” against each property. In case bid is placed in the last 10 minutes of the
closing time of the e-auction, the closing time will automatically get extended for 10 minutes.
16. The decision of Liquidator on declaration of successful bidder shall be final and binding on all
the Bidders.
Date:
Place:
________________________________________________________________________________________________________
36
C. ANNEXURE III
DECLARATION BY BIDDERS(S)
To,
Mr. Om Prakash Agrawal
The Liquidator,
S Kumars Nationwide Limited (In Liquidation)
Sir,
1. I / We do hereby state that I/We have read the entire terms and conditions governing the
auction of Assets of S Kumars Nationwide Limited - In Liquidation, as specified in the
Process Memorandum dated December 12, 2019 and have understood them fully. I/We
hereby unconditionally agree to confirm with and to be bound by the said terms and
conditions and agree to take part in the e-auction process.
2. I/ We declare that the Earnest Money and the deposit towards purchase – price have been
made by me/us as against my/our bid and that the particulars of remittance and all other
information given by me/us in the online form is true and correct.
3. I/ We further understand and agree that if any of the statement / information revealed by
me/us is found to be incorrect and / or untrue, the bid submitted by me/ us is liable to be
cancelled and in such case, the Earnest Money and / or any monies paid by me/us is liable
to be forfeited by the Seller and that the Seller will be at liberty to annul the offer made to
me/us at any point of time.
4. I/ We also agree that after my/ our offer given in my/our bid for purchase of property (ies)
is accepted by the Seller and if, I/ We, fail to accept or act upon the terms and conditions of
the sale or am/are not able to complete the transaction within the time limit specified for
any reason whatsoever and/or fail to fulfil any/all the terms and conditions of the auction
and offer letter, the Earnest Money and other monies paid by me/us along with the online
form and thereafter, are liable to be forfeited. The timeline for payment of final sale
consideration may be extended by sole discretion of liquidator, to the extent permissible
under the applicable laws and regulations. In case final sale consideration is not paid within
stipulated timeline, the liquidator shall forfeit Earnest Money.
5. I/ We understand that the Earnest Money of all Bidders shall be retained by the Liquidator
and returned only after the conclusion of the auction process as per the timelines mentioned.
I/We, state that I/We have fully understood the terms and conditions therein and agree to be
bound by the same.
6. I/ We confirm that our participation in the e-auction process, submission of bid or
acquisition of the Assets pursuant to the provisions of the Process Memorandum will not
conflict with, or result in a breach of, or constitute a default under (i) our constitutional
documents; or (ii) any applicable laws; or (iii) any authorisation or approval of any
________________________________________________________________________________________________________
37
government agency or body; or (iv) any judgement, order, injunction, decree, or ruling of
any court or governmental authority, domestic or foreign binding on me/ us; or (v) any
agreement to which I am / we are a party or by which I am / We are bound.
7. The decision taken by the Liquidator with respect to the selection of the Successful Bidder
and communicated to us shall be binding on me/us.
8. I/ We also undertake to abide by the additional conditions if announced during the e-auction
including any announcement (s) on correction of and/ or additions or deletions to the time
of auction portal and Assets being offered for sale.
9. I/We confirm that the Seller and/or his professional advisors, affiliates, directors,
employees, agents, representatives or managers of the process, shall not be liable and
responsible in any manner whatsoever for my/our failure to access and bid on the e-auction
portal due to any unforeseen circumstances etc. before or during the auction event.
10. I/We hereby confirm that I/we are eligible to purchase the assets of the Company under
Section 29A of the Insolvency and Bankruptcy Code, 2016 (as amended from time to time)
(Signature)
Name:
Address:
Email ID:
Mobile:
________________________________________________________________________________________________________
38
D. ANNEXURE IV
TECHNICAL TERMS & CONDITIONS OF E-AUCTION SALE
1. Intending bidders shall have a valid e-mail ID, valid PAN Card and KYC document to
register with the E- Auction Service Provider.
2. Intending bidders must register with the e-auction service provider.
3. Only upon verification of the Online Form and confirmation of remittance of Earnest
Money will the Eligible Bidders be declared and thereafter, permitted to access the Platform
for bidding for a particular Property/Asset.
4. The Bidder shall be solely responsible for all consequences arising out of the bid submitted
by him (including any wrongful bidding) and no complaint/ representation will be
entertained in this regard by the Agency/ the Seller. Hence, Bidders are cautioned to be
careful to check the bid amount and alter/ rectify their bid if required before confirming the
bid submitted.
5. Bidders should not disclose their User ID as well as password and other material
information relating to the bidding to anyone to safeguard its secrecy.
6. Bidders are advised to change the password immediately on receipt thereof.
7. The Affidavit and declaration as per the format set out in Annexure I and Annexure III
must be executed in accordance with applicable law and it must be in issued in accordance
with the constitutional documents of the Bidder, if applicable, after obtaining all corporate
approvals as may be required. The extract of constitutional documents and certified copies
of the corporate approvals must be enclosed with the declaration. In case of Bidder being an
individual, the declaration must be personally signed by the Bidder. In case the Bidder is
not an individual, the declaration must be signed by a who is duly authorized to sign the
same.
8. All the aforementioned documents are required to be uploaded on the portal and the original
physical copies thereof shall be provided by the Successful Bidder to the Seller in
accordance with the Process Memorandum.
9. All bids placed are legally valid bids and are to be considered as bids from the Bidder
himself. Once the bid is placed, the Bidder cannot reduce or withdraw the bid for whatever
reason. If done so, the Earnest Money amount shall be forfeited.
10. The highest bid on the auction shall supersede all the previous bids of the respective
Bidders. The Bidder with the highest offer/ bid does not get any right to demand for
acceptance of his bid.
11. After the conclusion of the e-auction for each Asset, the Successful Bidder shall be
informed through a message generated automatically by the portal, of the outcome of the e-
________________________________________________________________________________________________________
39
auction. A separate Intimation shall also be sent to the Successful Bidder. Date of sending
the e-mail will be considered as the date of receipt of the Intimation i.e. Date of Intimation.
12. Bidders may encounter certain unforeseen problems such as time lag, heavy traffic, and
system/ power failure at the Bidder’s end. To avoid losing out on bidding because of
above-mentioned reasons, it is advised not to wait for the last moment.
________________________________________________________________________________________________________
40
E. ANNEXURE V
LETTER OF INTENT
To, [name to be inserted]
[address to be inserted]
Attn. [ ]
Re: Auction sale of Asset Lot number [•] (insert description of asset) of S. Kumars Nationwide
Limited (In Liquidation) conducted on _____________.
Dear Sir/ Ma’am,
1. With reference to the above, successful bid was submitted by yourself___________
(“Successful Bidder”) in relation to E-auction sale of Asset (Asset or Asset Lot No__) of S.
Kumars Nationwide Limited (In Liquidation) (“Company”) auctioned on __________.
2. You are requested to confirm your acceptance of this LoI within 2 (two) days of the date of
issuance hereof with an endorsement stating that this LoI is, “Accepted Unconditionally”,
under the signature of the authorised director / authorised signatory. Within 90 (ninety) days
from the date of issuance of this LoI, you shall pay an aggregate amount of INR
________________ as the sale consideration towards purchase of assets comprised in Lot
number __ (“Sale Consideration”) plus any applicable GST, if any, on 100% of the Sale
Consideration, and as set out in the schedule to this LoI. Please note that, failure to accept
this LoI within the time period specified may result in your disqualification as the Successful
Bidder along with cancellation of this LoI and forfeiture of the Earnest Money deposited, in
relation to the captioned transaction issued by the Liquidator (“E-Auction Sale Process
Memorandum”).
3. The Liquidator agrees that simultaneously upon full payment of Sale Consideration and any applicable GST, if any, the Liquidator shall execute a deed of sale in your favour for conveyancing on “as is where is”, “as is what is”, “whatever there is” and “no recourse” basis of the specified Asset Lot, without any representations and warranties on the part of the Liquidator for any encumbrances / statutory liabilities etc. in relation to Asset Lot __.
4. This LoI is not a sale confirmation letter and is issued without prejudice to other terms and
conditions of the E-Auction Sale Process Memorandum. The issuance of this LoI shall not
be deemed to be conveying any right, title or interest in the Company or in any manner granting any right against the Liquidator, or their representatives and advisors, except to the
extent any right has been created under this LoI.
5. In the event you are found to have made any misrepresentation, wrongful disclosure or
misleading declaration of eligibility, this LoI may be revoked and on account of such
revocation you shall have no right under this LoI.
6. Any contravention of the terms of this LoI, including non- acceptance of the contents hereof
within the stipulated time period, shall lead to cancellation of this LoI, unless otherwise
provided in the Asset Sale Process Memorandum.
________________________________________________________________________________________________________
41
7. You shall keep the contents of this LoI confidential, save and except where any disclosure is required under applicable laws or a disclosure is required for securing financing or to your
professional advisors and financiers, who are in each case required in the course of their duties to receive and consider the same for the purpose of advising you in relation to the
transaction.
8. This LoI shall be governed by, and construed in accordance with, the laws of India and the
National Company Law Tribunal, Mumbai Bench shall have exclusive jurisdiction over all
disputes arising under, pursuant to and/ or in connection with this LoI.
9. Capitalised terms used but not defined herein shall have the meaning ascribed to them in the
Asset Sale Process Memorandum.
You are requested to unconditionally accept this LoI by countersigning this LoI and returning the
same to me.
Yours faithfully,
___________________
Liquidator
Unconditionally agreed and accepted by:
For
___________________
Authorized Signatory
________________________________________________________________________________________________________
42
F. ANNEXURE VI
DESCRIPTION OF ASSETS
The company owns a contiguous land parcel admeasuring 90.71 acres comprises of Leasehold
and Freehold land, as per following details:
SKNL proposes sale of High Value Fine Cotton Fabric Manufacturing Unit at Bharuch (Gujarat)
business as a going concern which includes Leasehold Land, and Freehold Land, Factory
Building, Plant and Machinery, Furniture and Fixtures and net current assets pertaining to the
Unit [Current Assets – Current Liabilities (Refer to liabilities accrued on or after the
commencement of Corporate Insolvency Resolution Process i.e. April 24, 2018)] and the
Brands/ Trademarks owned by S. Kumars Nationwide Limited along with licences, permits,
approvals and registrations to the extent they are transferable under the applicable law on “As is
where is basis”, “As is what is basis”, “Whatever there is basis”, and “No recourse basis”.
The proposed sale of assets of the Company does not entail transfer of any title except the title
which the Company had on its assets as on date of transfer of the Unit.
Lot No. 1:
Leasehold Land:
Part of Plot no. 825 of Jhagadia GIDC, Bharuch in the village Dadheda, Jhagadia Taluka,
Bharuch District, Gujarat having a total land area of 42.04 acres / 1,70,133 sq. mt. or 18,31,294
sq. ft. This land is leasehold land from GIDC and is subject to sub-division.
Factory building:
Plant building along with ancillary structures having total built up area of 61,994 sq. mt. or
6,67,298 sq. ft. This also includes land developments in form of boundary walls, Sewage line,
streetlights, internal roads etc as mentioned in subsequent pages.
Plant and Machinery:
Plant and Machinery which includes all the machineries installed for manufacturing of fabric as
well as equipment installed in utility such as boiler, DG set, ETP, STP etc. This also includes
furniture & fixture, office equipment, Computers and vehicles as mentioned in subsequent pages
Brands & Trademarks:
Following are live Brands & Trademarks owned by SKNL registered under Trade Marks Act,
1999:
Sr.
No. Name Regn. No Class Validity Goods in respect of class
1. Baruche 1867185 24
25-Sep-29 Textile piece goods
25 Readymade Garments
2. Belmonte 1883643 24
11-Dec-29 Textile piece goods
25 Readymade Garments
3. Carmichael 1387057 24 23-Sep-25 24-Textile piece fabrics
________________________________________________________________________________________________________
43
Sr.
No. Name Regn. No Class Validity Goods in respect of class
House 25 23-Sep-25 25-Readymade garments
4. Carmichael
House (Label) 1538451
24 09-Mar-27 24-Textile piece fabrics
25 09-Mar-27 25-Readymade garments
5. Kruger 2030415 25 20-Sep-20 Clothing (Readymade Garments)
6. Tamariind 2347556 24 13-Jun-22 Textile piece goods
7. World Player 916704 24 04-Jul-20 Textile piece goods
8. World Player 1395038 25 27-Oct-25 Readymade garments, clothing,
footwear, headgear.
9. Balmoral 945128 24 04-Aug-20 Textile piece goods.
10. Balmoral 945127 25 04-Aug-20 Readymade garments
11. Cinnamon 944889 24 03-Aug-20 Textile piece goods
12. Cinnamon 944888 25 03-Aug-20 Clothing (readymade garments),
hosiery, footwear and headgear
13. Clove 981255 24 03-Jan-21 Textile piece goods
14. Clove 981256 25 03-Jan-21 Readymade garments.
15. Crespo 1092240 24 04-Apr-22 Textile piece goods.
16. Linkool 1092245 24 04-Apr-22 Textile piece goods, shirting.
17. Manhattan
Farbriano 926018 24 22-May-20
Textile piece goods including
fabrics, shirting and suiting’s.
18. Mistral 1092250 24 04-Apr-22 Textile piece goods including
fabrics, shirting and suiting.
19. Triple Nine 865112 24 07-Dec-29 Tissues (piece goods) Bed and
table covers, textile articles.
20. TWS 996602 24 14-Mar-21 Textile piece goods.
21. TWS 996603 25 14-Mar-21 Clothing (readymade garments),
hosiery, footwear and headgear.
22. Belmonte 2152510 99
31-May-21 Cl.9-Sunglasses
(Cl.9&14) cl.14-Watches
23. Cinnamon
(Label) 953904 3 09-Jun-20 Perfumery, cosmetic
24. Cinnamon 953907 18 09-Jun-20 Leather imitation leather material
25. Sks White 953900 9 09-Jun-20 Personal diaries, electrical and
electronic apparatus, etc.
26. Sks White 953903 14 09-Jun-20
Precious metals, metals and their
alloys and goods in precious
metals
27. Sks White 953902 18 09-Jun-20 Leather imitation leather material
28. Spice Up Your
Dressing 978048 3 19-Dec-20 Perfumery, cosmetic
29. Spice Up Your
Dressing 978047 9 19-Dec-20
Scientific, electric, photographic
optical and teaching apparatus and
instruments
30. Spice Up Your
Dressing 978046 14 19-Dec-20
Precious metals, metals and their
alloys and goods in precious
metals
31. Spice Up Your Dressing
978045 18 19-Dec-20 Leather imitation leather material
________________________________________________________________________________________________________
44
Sr.
No. Name Regn. No Class Validity Goods in respect of class
32. Streets of
Chennai 2200721 35 09-Jun-21
Retail services in relation to
clothing, Buying & selling of
fabrics, Retail store services
33. Streets of
Kolkata 2200722 35 09-Jun-21
Retail services in relation to
clothing, Buying and selling of
fabrics, Retail store services
34. Streets of
Mumbai 2200724 35 09-Jun-21
Retail services in relation to
clothing, Buying and selling of
fabrics, Retail store services
35. Streets of Delhi 2200723 35 09-Jun-21
Retail services in relation to
clothing, Buying and selling of
fabrics, Retail store services
36. Streets of
Bangalore 2200720 35 09-Jun-21
Retail services in relation to
clothing, Buying and selling of
fabrics, Retail store services
37. Streets of Pune 2200719 35 09-Jun-21
Retail services in relation to
clothing, Buying and selling of
fabrics, Retail store services
38. Streets of
Hyderabad 2200726 35 09-Jun-21
Retail services in relation to
clothing, Buying and selling of
fabrics, Retail store services
39. TWS 996599 3 14-Mar-21 Perfumery, cosmetic
40. TWS 996607 9 14-Mar-21
Scientific, electric, photographic,
optical and teaching apparatus and
instruments
41. TWS 996606 14 14-Mar-21
Precious metals, metals and their
alloys and goods in precious
metals
42. TWS 996605 16 14-Mar-21
Printed matter, namely
publications, electronic,
publications, books, periodicals,
newsletters, magazines, etc.
Net Current Assets:
Net Current Assets (Current Assets less Current Liabilities) amounting to Rs 5 crore approx. as
on date. The Current Assets will not include the Debtors / Claims which are under litigation as
on date of transfer of Unit.
The Value of the Net Current Assets shall be determined by an independent Chartered
Accountant / Valuer appointed by the Liquidator. Such value shall be final and binding upon the
Successful Bidder.
________________________________________________________________________________________________________
45
1. Building details
Building description:
The total land area underneath the plant measures 42.04 acres out of 70.61 acres and it
comprises main factory building and other miscellaneous building like power plant, boiler
house, ETP, STP, stores, weigh bridge, security office. Construction of all building completed
by year 2009. Total built area including auxiliary buildings is 61,994 Sq.mtr. Details of the
built-up area, type of the structure and year of construction is mention in table below:
Sr. No Name of Building
Built up
area
(Sqm)
Type of structure Year of
construction
Condi
tion
Main plant building
1 Process House 21,285.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
2 Admin Building & Display
Room 860.00
RCC frame structure with RCC slab
roofing 2009 Fair
3 Yarn Dyeing 972.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
4 Grey Yarn Store 2,018.25 RCC column with MS Truss and A
C sheet roofing 2009 Fair
5 Dyed Yarn Store 2,118.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
6 Winding department 1,184.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
7 TFO 1,213.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
8 Humidification plant (GF) 1,746.00 RCC frame structure with RCC slab
roofing 2009 Fair
9 Humidification plant (FF) 530.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
10 Warper Department 3,960.25 RCC column with MS Truss and A
C sheet roofing 2009 Fair
11 Weaving Preparation (with
Sizing department) 2,768.00
RCC column with MS Truss and A
C sheet roofing 2009 Fair
12 Drawing 800.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
13 Beam storage 520.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
14 Scrape Storage and dispatch
area 2,722.50
RCC column with MS Truss and A
C sheet roofing 2009 Fair
15 Weaving area (Office & toilet
blocks) 6,960.00
RCC column with MS Truss and A
C sheet roofing 2009 Fair
16 Reed cleaning 150.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
________________________________________________________________________________________________________
46
Sr. No Name of Building
Built up
area
(Sqm)
Type of structure Year of
construction
Condi
tion
17 Grey Store 2,681.25 RCC column with MS Truss and A
C sheet roofing 2009 Fair
18 Canteen 937.50 RCC frame structure with RCC slab
roofing 2009 Fair
19 First Floor of Canteen 667.50 RCC column with MS Truss and A
C sheet roofing 2009 Fair
20 Compressor room 300.00 RCC frame structure with RCC slab
roofing 2009 Fair
21 Passage 2,247.00 2009 Fair
Auxiliary buildings
22 Finished fabric store 1,680.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
23 General Store 715.20 RCC column with MS Truss and A
C sheet roofing 2009 Fair
24 Workshop & HT Room 737.55 RCC column with MS Truss and A
C sheet roofing 2009 Fair
25 Stores / Office / Toilets 742.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
26 Power Plant 1,287.00 RCC column with MS Truss and A
C sheet roofing 2009 Fair
27 Gate Cabin 12.00 RCC frame structure with RCC slab
roofing 2009 Fair
28 Retail Store 180.00 RCC frame structure with RCC slab
roofing 2009 Fair
Total 61,994.00
________________________________________________________________________________________________________
47
2. Plant and Machinery Details
The SKNL, Bharuch plant has a capacity of manufacturing 12.50 -million-meter and processing
& finishing capacity of 18 million-meter of cotton fabric per year. The plant also has a facility of
Dyeing of Yarn. It has total Nos. of 7 divisions which are named as Dyeing,
Winding/Unwinding, Warping, sizing, Drawing-In, Weaving and Processing unit. Each unit
perform a specific task for an end to end process of manufacturing of cotton fabric from cotton
yarn. Machines that are installed in the facility according to process are Winding, Dyeing, drier,
unwinding, warping, sizing, drawing-in, looms, inspection, batching, pad-dry, CPB, singeing,
desizing, mercerizer, stenter, sanforizer, calendaring and packaging machines. There are many
auxiliary machines installed for the operation in the plant are Boilers, Air compressors, Gas
compressors, Chillers, Gas generator and CRP plant.
The Bharuch Unit is currently operating at around 30% of capacity.
The list below tabulates the make, technical details, year of installation, operating status of the
main machineries at present:
Sr. No. Name of Machine Section Make Qty Capacity YOI
1 Dyeing Machine Yarn Dyeing
Drier Thies AG, Switzerland 2 4.5 Ton/day 2010
Large Dyer Thies AG, Switzerland 5 4.5 Ton/day-594
Kg/slot 2010
Small Dyer Thies AG, Switzerland 10 2010
2 Winding/unwinding
Machine Winding
Winding Machine OerlikonSchlafhorst –
Germany 4
60 heads-8
ton/day 2009
Unwinding Machine OerlikonSchlafhorst –
Germany 2
60 heads-8
ton/day 2009
Unwinding Machine OerlikonSchlafhorst –
Germany 2
50 heads-8
ton/day 2009
3 Warping Machine Warping
Sample warping SUZUKI-Almundo
Associates, Japan 2
7/14/21 meter-
180 Cm width 2009
Direct Warping Benninger AG, Switzerland 1
6 set per day-180
cm Width- 5000
mtr to 1 Lakh
mtr beam per
day capacity
2009
Sectional Warping Benninger AG, Switzerland 4
6 set per day-180
cm Width- 1000
mtr per beam
only
2009
Desk Sample warping
CCI 2 3 set per day-180
cm Width 2009
________________________________________________________________________________________________________
48
Sr. No. Name of Machine Section Make Qty Capacity YOI
4 Sizing Machine Sizing
CTB Machine Benninger AG, Switzerland 1 15 Beam/Day 2010
BTB Machine Benninger AG, Switzerland 1 15 Beam/Day 2010
Sample sizing Machine Yamada 1 2009
5 Drawing-In Drawing
Manual StabuliSargans AG,
Switzerland 12
1.25 Lacs ends
per day 2009
Automatic StabuliSargans AG,
Switzerland 2
720 fibre
drawing at a
time from beam
2009
6 Looms Machine Weaving
Rapier Looms Picanol-Optimax 70
190 cm Width-6
Beam per day
per Machine-650
RPM-85%
Effieciency-
1200 mtr avg
beam length-
Production
capacity 4000
meter to 8800
meter
2009
Airjet Looms Picanol-Omniplus 800 60
190 cm Width-6
Beam per day
per Machine-850
to 1050 RPM-
85%
Effieciency-
1200 mtr avg
beam length-
Production
capacity 3300
meter to 17000
meter
2010
Desk Sample looms CCI 2 6 Beam per day
per Machine 2010
7 Inspection Machine Weaving
Inspection Machine Yash textile market 7 50 mtr/min 2010
Batching Unit Yash textile market 1 50 mtr/min-
46080 mtr/day 2010
8 Pad-Dry Machine Processing
Pad-Dry Machine A MonfortsTextile machine
GMBH Germany 1
80 mtr/min-2500
mtr per shade 2011
CPB-dry Machine Benninger AG, Switzerland 1 50 mtr/min-2500
mtr per shade 2010
9 Singeing Machine Processing
Singeing Machine Osthoff - Senge System 1 80 mtr/min-320
cm 2010
10 Continuous Scouring
& Bleaching Machine Processing
________________________________________________________________________________________________________
49
Sr. No. Name of Machine Section Make Qty Capacity YOI
Extracta Benninger AG, Switzerland 1 80 mtr/min 2010
Impacta
11 Mercerizing Machine Processing
Mercerizer Benninger AG, Switzerland 1 80 mtr/min-
70560 mtr/min
2010
12 Stenter Machine Processing
Stenter- 8 Chamber A
MonfortsTextilmaschinen
GMBH Germany
1
60% efficiency-
148 width+3000
mtr/hr-190 C-
60480 mtr/day
2010
Stenter- 6 Chamber A
MonfortsTextilmaschinen
GMBH Germany
1
60% efficiency-
148 width+3000
mtr/hr-190 C-
51840 mtr/day
2011
13 Shrinking Range For
Processing Machine Processing
Sanforizer Machine A
MonfortsTextilmaschinen
GMBH Germany
1 3000 mtr/hr- 150
C-51840 mtr/day 2010
14 HYCON
CALENDER Processing
Calendering Machine AndritzKusters GMBH &
Co., GE 1
3600 mtr/hr-150
C-51480 mtr/day 2010
15 Packaging Processing
Inspection Machine Yash textile market 7 50 mtr/min 2010
Packaging Machine Yash textile market 1 80 mtr/min 2010
OTC packging
Machine Yash textile market 1 80 mtr/min 2010
The list below tabulates the make, technical details of the Auxiliary Machineries:
Sr. No Name of Machine Make Qty Capacity YOI
1 Boiler 1 12 ton/hr- 10.54 KG
pressure
2 Chiller Turbomach,
Switzerland 2
2000 KL-storing
capacity 2011
3 Caustic Soda Recovery System Korting Hannover
AG, Germany
4 Dehumidification Plant
Winding 1 2010
Weaving 2 2010
Warping 1 2010
5 Gas Compressor Enerproject SA,
Switzerland 1
2200 N/m3-265 KW-
2980 RPM 2011
6 Air Compressor
Atlas Copco
Airpower NV
Belgium
1 5206 CFM 2009
________________________________________________________________________________________________________
50
Detailed List of Plant and Machinery at Bharuch Plant:
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
Plant and Machinery
1
Winding
AUTO CORNER - 1-SOFT-
REWINDING 1
60 Spindle 19.3
KG/ SPINDLE
Type Autocorner 338 E
/ 60 Head Working
2 AUTO CORNER - 2-SOFT-
REWINDING 1
60 Spindle 19.3
KG/ SPINDLE
Type Autocorner 338 E
/ 60 Head Working
3 AUTO CORNER - 3-SOFT-
REWINDING 1
60 Spindle 19.3
KG/ SPINDLE
Type Autocorner 338 E
/ 60 Head Working
4 AUTO CORNER - 4-
REWINDING 1
60 Spindle 19.3
KG/ SPINDLE
Type Autocorner 338 E
/ 60 Head Working
5 AUTO CORNER - 5-
REWINDING 1
60 Spindle 8.8
KG/SPINDLE
Type Autocorner 338 E
/ 60 Head Working
6 AUTO CORNER - 6-
REWINDING 1
60 Spindle 8.8
KG/SPINDLE
Type Autocorner 338 E
/ 60 Head Working
7 AUTO CORNER - 7-
BOTTOM-REWINDING 1
50 Spindle 8.8
KG/SPINDLE
Type Autocorner 338 E
/ 50 Head Working
8 AUTO CORNER - 8-
BOTTOM-REWINDING 1
50 Spindle 8.8
KG/SPINDLE
Type Autocorner 338 E
/ 50 Head Working
9
Sample
Warper
SUZUKI SAMPLE
WARPER -1 MODEL
:NAS-140CW
1
Warping Width
:2250 , Drum
Circumstance :7
Meter
3BEAMS/DAY
Suzuki :NAS-140CW-
2250 Working
10
SUZUKI SAMPLE
WARPER -2 MODEL
:NAS-140CW
1
Warping Width
:2250 , Drum
Circumstance :7
Meter
3BEAMS/DAY
Suzuki: NAS-140CW-
2250 Working
11
Warping
DIRECT WARPING -1 1
Benninger high
speed warping
machine
6SET/DAY
(DYED)
Ben-Direct-800-1800-
GV /optostop-720 Working
12 SECTIONAL WARPING -1 1
Benninger high
speed warping
machine 6
BEAMS/DAY
Beninger Type
Ergotec-2200-GP-
W/ISTONS-720
Working
13 SECTIONAL WARPING -2 1
Benninger high
speed warping
machine 6
BEAMS/DAY
Beninger Type
Ergotec-2200-GP-
W/ISTONS-720
Working
14 SECTIONAL WARPING -3 1
Benninger high
speed warping
machine 6
BEAMS/DAY
Beninger Type
Ergotec-2200-GP-
W/ISTONS-720
Working
15 SECTIONAL WARPING -4 1
Benninger high
speed warping
machine 6
BEAMS/DAY
Beninger Type
Ergotec-2200-GP-
W/ISTONS-720
Working
________________________________________________________________________________________________________
51
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
16
CCI
SAMPL
E
WEAVI
NG
CCI SAMPLE LOOM NO -
1 1
24 Shaft , 12
Selectors
NOlWlNAL
WORKING WIDTH:
430
MM,ELECTRONIC
CONTROLLED
SHAFTS: 24 (2 FOR
LENO, 22
FOR PATTERN)
ELECTRONIC
CONTROLLED
WEFT COLOR
SELECTORS: 12
BEAT-UP: DRIVEN
BY SERVO MOTOR
WEFT INSERTION:
SINGLE RAPIER
DRIVEN BY SERVO
MOTOR
WEFT ROTARY
CUTTER
Working
17 CCI SAMPLE LOOM NO -
2 1
24 Shaft, 12
Selectors
NOlWlNAL
WORKING WIDTH:
430
MM,ELECTRONIC
CONTROLLED
SHAFTS: 24 (2 FOR
LENO, 22
FOR PATTERN)
ELECTRONIC
CONTROLLED
WEFT COLOR
SELECTORS: 12
BEAT-UP: DRIVEN
BY SERVO MOTOR
WEFT INSERTION:
SINGLE RAPIER
DRIVEN BY SERVO
MOTOR
WEFT ROTARY
CUTTER
Working
18 CCI
SAMPL
E
WARPI
NG
CCI SAMPLE WARPER-1 1 Working Width
:500MM
NOMINAL
WORKING WIDTH:
500 MM
WARP LENGTH: 3.6
METERS
Working
19 CCI SAMPLE WARPER-2 1 Working Width
:500MM
NOMINAL
WORKING WIDTH:
500 MM
WARP LENGTH: 3.6
METERS
Working
________________________________________________________________________________________________________
52
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
20
Sizing
SIZING BEAM TO BEAM
-1 1
BEN-SIZETEC SWA
TKD ZT8 BB Working
21 SIZING CREEL TO BEAM
-1 1
SIZETEC ZB16 SWA
TKD TKD CT4/4/4 BB Working
22 Yamada YAMADA SIZING 1 TYPE
:YS-20 1
Type : YS-6 20
Spindles,Steam Type Working
23 Delta DELTA MACHINE 1
MAKE :STAUBLI 1 STAUBLI DELTA 110 Working
24 Reed
Cleaning
REED CLEANER M/C 1
MAKE :SPALECK 1
Weaving Reed
Cleaning
Through Steam
+ Chemical
SPALECK REED
CLEANER Working
25
Material
Handlin
g
Rimtex Alluminium Trolley
Size :600 X 400 X 600 mm 15
Yarn
Movement M/s Rimtex Working
26
Rimtex Alluminium Trolley
IIIMENSION 1330
X730X910MM
40 Yarn
Movement M/s Rimtex Working
27
Rimtex Alluminium Trolley
SIZE 1600X1100X1150
MM WITH 125 MM
15 Yarn
Movement M/s Rimtex Working
28 Peg Trolley 116 M/s K.B Son &
Dharmshil Working
29
A FRAME TROLLEY
MODEL EMBEE 329
110 (ZMTR
ROLLER
FACE)
M/S EMBEE
CORPORATION
Working
30 HORSE ACK TROLLY 24 Working
31 U FRAME TROLLY 15 Working
32
EOT CRANE -1 FOR
SIZING MAKE : SAFEX
CAP :2.5 TONNE
1 2.5 Tonne Load SAFEX Working
33
EOT CRANE -1 FOR
SIZING MAKE : SAFEX
CAP :2.5 TONNE
1 2.5 Tonne Load SAFEX Working
34
EOT CRANE -1 FOR
YARNDYEING MAKE :
SAFEX CAP :2.5 TONNE
1 2.5 Tonne Load SAFEX Working
35
GENKINGER SINGLE
BEAM TROLLEY 1 EE-
KHUR-20/10
1 Weaving Beam
Lifting Purpose
GENKINGER-
HUBTEX
Working
36
GENKINGER TOP BEAM
TROLLEY 1 EE-KHUR-
20/80
1 Weaving Beam
Lifting Purpose
GENKINGER-
HUBTEX
Working
37 GENKINGER WARPY 1 1 Weaving Beam M/s Picanol Working
________________________________________________________________________________________________________
53
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
TROLLEY FOR
WEAVING MACHINE (
Delta )
Lifting Purpose
38
"GODREJ DIESEL
FORKLIFT TRUCK
MODEL GX
39
300 D" 1 3.0 Tonne Load GODREJ & BOYCE
MFC.CO.LTD
Working
40
GODREJ POWER PALLET
TRUCK 1 MODEL WP
2320 CROWN
1 GODREJ & BOYCE
MFC.CO.LTD
Working
41
GODREJ POWER PALLET
TRUCK 2 MODEL WP
2320 CROWN
1 GODREJ & BOYCE
MFC.CO.LTD
Working
42
GODREJ POWER PALLET
TRUCK 3 MODEL WP
2320 CROWN
1 GODREJ & BOYCE
MFC.CO.LTD
Working
43
GODREJ HYDRAULIC
HAND PALLET TRUCK,
MODEL CROWN PTH 20-
45
6 2300 kg GODREJ & BOYCE
MFC.CO.LTD
Working
44
GODREJ HYDRAULIC
HAND PALLET TRUCK,
MODEL CROWN PTH 20-
45
2 2300 kg GODREJ & BOYCE
MFC.CO.LTD
Working
45
HAND PALLET TRUCK
CROWN GODREJ MAKE
CAPACITY 2.3 TON
MODEL PTH 27-45
4 2300kg GODREJ & BOYCE
MFC.CO.LTD
Working
46
GENKINGER
HYDRAULIC LIFT
TROLLEY HR 25
4 Process
Department
GENKINGER-
HUBTEX
Working
47
Hydraulic Lifter for Batch 6 1.5 Tonne Skega Engineering Co
Pvt Ltd
Working
48
GENKINGER PC-WARP
BEAM LOW LIFTTRUCK
TYPE :KGH 20/13
1 GENKINGER-
HUBTEX
Working
49
GENKINGER FABRIC
LIFT TRUCK WB 3/6 FOR
WEAVING
2 GENKINGER-
HUBTEX
Working
________________________________________________________________________________________________________
54
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
50
GENKINGER EMPTY
BEAM TRUCK LTW5S
FOR WEAVING
1 GENKINGER-
HUBTEX
Working
51
Grey Inspection Automatic
Lifting Trolley
3 M/s Anetex
52
GENKINGER A-FRAME
LIFTER CUM PULLAR
EGS-40
1 A-Frame
Lifting Trolley
For Process
GENKINGER-
HUBTEX
Working
53
Weaver's Beam Hand Pallet
Trolley
1 Skega Engineering Co
Pvt Ltd
Working
54 Sizing
Kitchen
SIZE KITCHEN M/s
K.B.Son 1
Size
Preparation
Cooker +
Transfer Pump
K.B. Son Working
55
Weaving
Machina
ries
Picanol Rapier ( Optimax
Machines ) 70
11000 Mtr /
Day , 92 Picks
per inch
M/s Picanol , Rapier
190CM Machine Working
56 Picanol Airjet ( Omni Plus
800 ) 60
17000 Mtr /
Day , 80 Picks
per Inch
M/s Picanol , Airjet
190CM Omni Plus 800
Machine,OmniplusS0O
-2-p - 190 (18 Nos.)
Omniplus8OO - 4 - p -
190 (30 Nos.)
OlUiplus800 - 6 - p -
190 (12 Nos.)
Working
57
Travelli
ng
Cleaner
for
Weaving
ELECTRO JET 1 MODEL
:LT2 SR :T-2845 1
M/S ELECTRO JET,
Model :LT2
Working
58 ELECTRO JET 2 MODEL
:LT2 SR :T-2846 1 Working
59 ELECTRO JET 3 MODEL
:LT2 SR :T-2844 1 Working
60 ELECTRO JET 4 MODEL
:LT2 SR :T-2835 1 Working
61 ELECTRO JET 5 MODEL
:LT2 SR :T-2843 1 Working
62 ELECTRO JET 6 MODEL
:LT2 SR :T-2836 1 Working
63 ELECTRO JET 7 MODEL
:LT2 SR :T-3120 1 Working
64 ELECTRO JET 8 MODEL
:LT2 SR :T-2839 1 Working
65 ELECTRO JET 9 MODEL
:LT2 SR :T-2840 1 Working
66 ELECTRO JET 10 MODEL
:LT2 SR :T-2842 1 Working
67 ELECTRO JET 11 MODEL 1 Working
________________________________________________________________________________________________________
55
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
:LT2 SR :T-2837
68 ELECTRO JET 12 MODEL
:LT2 SR :T-2838 1 Working
69 ELECTRO JET 13 MODEL
:LT2 SR :T-2841 1 Working
70 Name
Writer
Name Writer Attachment (
Selvedge Writter ) 24
For Selvedge
Write up
M/s SNS ( Perfect
Scale , Bhilwara ) Working
71
Spool
Winder
Spool Winder for Selvedge 1 Spool
Preparation for
Selvedge
Prashant GammaTex ,
Ahmedabad
Working
72
Yarn
Dyeing
Eco-bloc Quattro Type
2/229/2 2 2 kgs each Coupling Option Working
73 Eco-bloc Quattro Type
4/229/3 4 3 kgs each
Coupling option in all
permutation &
combination
Working
74 Eco-bloc Quattro Type
4/229/6 4 6 kgs each
Coupling option in all
permutation &
combination
Working
75 Eco-bloc X Yarn dyeing m/c
Type 800KB ( 106 Kg ) 2 140kgs
Vertical High
temperature high
pressure package
dyeing.
Working
76 Eco-bloc X Yarn dyeing m/c
Type 650KB ( 57 Kg ) 1 70kgs Working
77 Eco-bloc X Yarn dyeing m/c
Type 1350LB (600 Kg ) 1 700kg Working
78 Eco-bloc X Yarn dyeing m/c
Type 1350KB ( 300 Kg ) 1 400kg Working
79 Pressure Dryer " RIII " 1350
KB ( 300 KG ) 1
500 kg per
batch
Pressure Dryer/Rapid
Dryer Working
80 Chemical Supply System
MPS-L 1
10 overhead
tanks
For liquid chemicals
only Working
81 Dyestuff desolving system
MPS-D -300 Ltr 1 300litres
Automatic Chemical
Transfer to Machine as
per Programming in
Orgatex
Working
82 Dyestuff desolving system
MPS-D -600 Ltr 1 600litres Working
83 Orga Tex Overhead System
for T 858 1
Orgatex
Computer
Server + Client
Automatic
Programming of All
Dyeing Machines as
per programme
Working
84 Heat Recovery Plant Type
150 1
Heat Recovery
System Working
85 Yarn
Dyeing
Lab
Equipm
ent
ELECTRO-HYDRAULIC
LIFT 1 2.5 Tonne
Make :TRUCK MAN
Hydraulic Lift for
Loading & unloading
Chemical & Material
Working
86 MATHIS SOAPY 1 MATHIS Working
87 MATHIS LABOMAT 2
12 Beakers
each with hank
quantity of
30gms.
RF Drying Beaker
dyeing machine. Working
________________________________________________________________________________________________________
56
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
88 WRAP REEL 1 TEX LAB Working
89 WRAP REEL 1 INNOLAB India
90 DATACOLOR AUTO LAB
SPS 1
Gravimetric laboratory
dispenser (Datacolor) Working
91 Automatic Solution Maker
(Datacolor) 1 Autolab SPS Working
92 Computer Color Matching
(Datacolor) 1 DATACOLOUR Working
93 SPECTRA LIGHT BOX 2
SPECTRA LIGHT
BOX CHECKING OF
COLOUR SHED
Working
94
SHADE CARD
PREPARATION
MACHINE
1 M/s Mesdan Working
95 LAB FASTNESS TESTER 1 M/s Mesdan Working
96 HOT AIR OVEN 1 Eie Instruments Working
97 HANK TO CONE PS M/C. 1 3 Spindle PS IND. Working
98 Singeing
SENGE-DESIGE
MACHINE (SINGEING
AND PREPRATORY
LINES OSTHOFF SENGE
SYSTEM )
1 3400MM OSTHOFF Working
99 PTR
Machine
PRE-TREATMENT
RANGE ( PTR-I & II ) (
BENNINGER OPEN
WDTH CONTINOUS
SCOURING AND
BLEACHING RANGE M/C
PRE-TREATMENT
RANGE(PTR) ( machine no
TA301972) )
1 3400MM/3200
MM BENNINGER Working
100 VDR
VDR FOR OPEN WIDTH
CONTINOUS SCOURING
AND BLEACHING
RANGE (18+2 WW3200
MM)
1 (18+2 WW3200
MM) KUSTER CALICO Working
101 Merceris
er
MERCERISER
(BENNINGER FABRIC
MERCERIZING
MACHINE WITHOUT
CAUSTIC RECOVERY
UNIT TYPE MS5-1E-LG
EXTRACTA-(ZT)-3200(
machine no TA301974) )
1 3200MM BENNINGER Working
102 VDR
VDR FOR FABRIC
MERCERISING (20+2 WW
3200 MM)
1 (20+2 WW
3200 MM) KUSTER CALICO Working
103 PAD PADDRY - Thermosol 1 1800MM MONFORT'S Working
________________________________________________________________________________________________________
57
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
Dry
104 PAD
STEAM PAD STEAM 1 1800MM BENNINGER Working
105 VDR
VDR FOR FABRIC FOR
PAD STEAM (16+2 WW
1800 MM)
1 (16+2 WW
1800 MM) KUSTER CALICO Working
106 CPB
COLD PAD BATCH
MACHINE ( BENNINGER
COLD PAD BATCH TYPE
222-12-1800 (CPB) )
1 1800MM BENNINGER Working
107 VDR
VDR FOR OPEN WIDTH
CONTINOUS SCOURING
AND BLEACHING
RANGE (18+2 WW3200
MM)
1 (18+2 WW3200
MM) KUSTER CALICO Working
108 Stenter -
8
STENTER (8 CH)-CURING
(MONFORTS MAKE
STENTER FRAME RANG
MONTEX 6500- 8F- 200
CM )
1 1800MM MONFORT'S Working
109 Stenter -
6
STENTER(6 CH) (
MONFORTS MAKE
STENTER FRAME RANG
MONTEX 6500- 6F- 200
CM )
1 1800MM MONFORT'S Working
110 Shrinka
ge
MONFORTS MAKE
SHRINKAGE RANGE 200
CM ( monfortex sanforizer)
71-T-75004
1 1800MM MONFIRT'S Working
111 VDR
VDR FOR FABRIC
MERCERISING (20+2 WW
3200 MM)
1 (20+2 WW
3200 MM) KUSTER CALICO Working
112
Calende
r
CALENDER MACHINE (
HYCON-L CALANDER
423.55 X 3600 MM RW
INCLUDING
ACCESSORIES )
1 3400MM ANDTRIZ KUSTER'S Working
113 CRP CAUSTIC RECOVERY
PLANT 1
4 Stage Caustic
Soda Recovery
System for
14000 Ltrs /
Hrs Capacity
alongwith spare
parts for 2-year
operation
Korting Hannover AG Working
114 Batch
Rotation
Rotating Station 1 ( 12
Station ) 1 Kuster Working
115 Rotating Station 2 ( 6
Station ) 1 Kuster Working
________________________________________________________________________________________________________
58
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
116
SS Tank
for
Process
SS TANK 2000 LTR
CAPACITY 2
Chemical
Mixing &
Storage
Working
118 SS TANK 1000 LTR
CAPACITY 11
Chemical
Mixing &
Storage
Working
119 SS TANK 500 LTR
CAPACITY 8
Chemical
Mixing &
Storage
Working
120 SS TANK 250 LTR
CAPACITY 3
Chemical
Mixing &
Storage
Working
121 SS MOBILE TANK 1000
LTR CAPACITY 5
Chemical
Mixing &
Storage
Working
122 SS MOBILE TANK 500
LTR CAPACITY 5
Chemical
Mixing &
Storage
Working
123 MS
Tank
MS TANK 20000 LTRS
CAPACITY FOR
CAUSTIC RECOVERY
PLANT
6
Chemical
Mixing &
Storage
Working
124
Processi
ng Lab
Equipm
ent
MATHIS DRYER 1 MATHIS Working
125 MATHIS PADDER 1 MATHIS Working
126 RBE Padding Mangle 1 R B Electronic &
Engineering Pvt Ltd Working
127 MATHIS E-CONTROL 1 MATHIS Working
128 MATHIS PAD STEAMER 1 MATHIS Working
129 MATHIS WASHER 1 MATHIS Working
130 Data colour Auto lab sps
mixer station 1 DATACOLOUR Working
131 Data colour Auto lab
solution maker 1 DATACOLOUR Working
132 data colour autolab TF 80
dispenser 1 DATACOLOUR Working
133 PHOTO SPETRO METER -
600TM 1 DATACOLOUR Working
134
MACBETH SPECTRA
LIGHT BOX model-
SPL111 W-1500
1 SPECTRA Working
135
MICROWAVE OVEN W-
1350 MODEL-MC8087
ABR & MC3283 FMPG
2 LG Working
136
QA Lab
Equipm
ent
ELEWRAP- 10 MODEL -
NO MAG Y0151 1 MAG SOLVICS Working
137 AUTO WINDER Model-
MAG Y0821 1 MAG SOLVICS Working
138 MECTEAR ( FABRIC
TEAR TESTER ) Model- 1 MAG SOLVICS Working
________________________________________________________________________________________________________
59
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
MAG C0801
139
Circular specimen cutter
capacity -dia 112,80 mm
model -MAG C0101 (
GSM Cutter )
1 MAG SOLVICS Working
140
WEIGHING SCALE -220G
MAX, MODEL-
ML204/A01 TYPE-NEW
CLASSIC MF
1 METTLER TOLEDO Working
141
NU MARTINDALE
ABRASION &PILLING
TESTER MODEL- 864
NU MARTINDALE
1 JAMES H. HEAL Working
142
TITAN 3 UNIVERSAL
STRENGTH TESTER
MODEL -910 TITAN
1 JAMES H. HEAL Working
143 PILLIS COPE MODEL-
PILLIS COPE 1 VERIVIDE Working
144
PNEUMASTIFF MODEL-
M09C11031 CAPACITY -
30KG
1 MAG SOLVICS Working
145
ATTRIFIL FRICTION
TESTER MODEL-
ATTRIFIL TYPE-223B
1 MESDAN (ITALY) Working
146
COMPUTWIST MODEL-
MAG Y0762 CAPACITY-
20 INCH
1 MAG SOLVICS Working
147
USHA JANCME
STITCHING MACHINE
MODEL- STITCH MAGIC
2 USHA Working
148
UNISTRETCH 250
MODEL-MAG G0101
CAPACITY-250 KG
1 MAG SOLVICS Working
149
ROTARY IRON MODEL-
B990 ART.NO-13099026
GB , M.NO-7222710
1 MIELE Working
150
HUMIDIFIRE MODEL-
M25KA001VBG00 20M
X12L O7601
1 EMERSION Working
151 VERIVIDE LIGHT BOX
MODEL- ATCC24 1 VERIVIDE Working
152 HYGRO- THERMO
GRAPH MODEL-ST50 1 SEKONIC Working
153 CREASE RECOVERS
ANGLE TESTER 1 JAMES H. HEAL Working
154 SMART PUB XT MODEL-
MAG C0252 1 MAG SOLVICS Working
155 CROCK MASTER (
COLOUR FASTNESS TO 1 JAMES H. HEAL Working
________________________________________________________________________________________________________
60
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
RUBBING) MODEL-
MOTOR DRIVEN CROCK
MASTER
156 CARBOLITE OVEN
TYPE-HX30 1 JAMES H. HEAL Working
157 CARBOLITE OVEN
TYPE-PF60 1 CARBOLITE Working
158 PH TESTER MODEL-
CPM-280 1 ENDRESS + HAUSER Not Working
159
PRESOHOT SH ( HOT
PLATE) MODEL-MAG
C2101 CAPACITY -
160X125 MM
1 MAG SOLVICS Working
160 SEDKO (HOT PLATE) 1 SEDKO Working
161
PRECISA XB 320M (
WEIGHING SCALE)
MODEL-MAG BA019A
CAPAITY-320 GMS
1 PRECISA Working
162
PARAMOUNT SPRAY
TESTER (S.S) SPECIMEN
TEMPLATE SIZE-18 CMS
X 18CMS
1 PARAMOUNT Working
163 WASHING MACHINES
MODEL-W10095570 1 WHIRLPOOL (USA) Working
164 AIR DRYER MODEL-
W10095950 1 WHIRLPOOL (USA) Working
165
WASHING MACHINES (-
WHITE MAGIC PROXL
800H ) MODEL-11585
1 WHIRLPOOL Not Working
166 WASHING MACHINES
360 Blow Wash 1 WHIRLPOOL Working
167 Washing Machines Ultra 6
Sense 1 WHIRLPOOL Working
168
GYROWASH (WASHING
DRY CLEANING
COLOUR FASTNESS
TESTER)
1 JAMES H. HEAL Working
169 WASCATOR MODEL-
FOM71C15 1
JAMES H. HEAL
(ELECTOROLUX) Not Working
170
ACCUDRY
STANDARDISEAL
TUMBLE DRYER
1 JAMES H. HEAL Working
171 Revo Overlock Machine 2 Revo
One Working
& 1 Only
Head
172 Hardness Tester HP 5 1 Working
173 Moisture Meter 2 Digi Moist One Working
174 KNITTING MACHINE 1 BHARAT Working
175 KNITTING MACHINE 1 MESDAN (ITALY) Working
________________________________________________________________________________________________________
61
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
TYPE-294 E
176
Greige
Inspecti
on
Machine
GREIGE INSPECTION
MACHINE NO 1 MAKE
:YASH
1 2500 Mtr / Shift
YASH TEXTILE
MACHINES PVT
LTD
Working
177
GREIGE INSPECTION
MACHINE NO 2 MAKE
:YASH
1 2500 Mtr / Shift Working
178
GREIGE INSPECTION
MACHINE NO 3 MAKE
:YASH
1 2500 Mtr / Shift Working
179
GREIGE INSPECTION
MACHINE NO 4 MAKE
:YASH
1 2500 Mtr / Shift Working
180
GREIGE INSPECTION
MACHINE NO 5 MAKE
:YASH
1 2500 Mtr / Shift Working
181
GREIGE INSPECTION
MACHINE NO 6 MAKE
:YASH
1 2500 Mtr / Shift Working
182 Greige
Batching
GREIGE PREPARATORY
LINE M/C TYPE NDR
JSCRAY-SWBB MOD
PREMIER
1 Working
183
Finish
Inspecti
on
Machine
FINISH INSPECTION
MACHINE NO 1 MAKE
:YASH
1 2000 Mtr / Shift Working
184
FINISH INSPECTION
MACHINE NO 2 MAKE
:YASH
1 2000 Mtr / Shift Working
185
FINISH INSPECTION
MACHINE NO 3 MAKE
:YASH
1 2000 Mtr / Shift Working
186
FINISH INSPECTION
MACHINE NO 4 MAKE
:YASH
1 2000 Mtr / Shift Working
187
FINISH INSPECTION
MACHINE NO 5 MAKE
:YASH
1 2000 Mtr / Shift Working
188
FINISH INSPECTION
MACHINE NO 6 MAKE
:YASH
1 2000 Mtr / Shift Working
189
FINISH INSPECTION
MACHINE NO 7 MAKE
:YASH
1 2000 Mtr / Shift Working
190
LOGISTIC SET UP FOR
PACKING M/C TYPE
STD, MODEL
EURO,MAKE : YASH
1 Working
191 FABRIC PACKING M/C 1 500 Roll Per Working
________________________________________________________________________________________________________
62
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
TYPE EUROPACK,
MODEL L/30/180 MAKE
:YASH
day
192
Batch to
Batch &
Batch to
Roll
Machine
Yash Batch to Batch &
Batch to Roll Machine 1 Working
193 Spool
Winder Spool Winder for Selvedge 1
Spool
Preparation for
Selvedge
Prashant GammaTex,
Ahmedabad Working
194
HMI
Panel
for Grey
& Finish
Inspecti
on
Panel for Grey Inspection
Machines Incl. 1 Database (
HMI )
4
Communication
with Finish
Inspection data
With Server &
Mention Report
of Each Defect
Maag Brother
Not Working
195
Panel for Finish Inspection
Machines Incl. 1 Database (
HMI ) + 5 Label Printer
5 Not Working
196
Almac &
Polytex
OTC
Machine
ries
ALMAC FABRIC
DOUBLING & LAPPING
MACHINE 1 MODEL
:DFLM-02
1
YASH TEXTILE
MACHINES PVT
LTD
Working
197 AlMAC Layer & Cutting
Machine 1
ALMAC POLYTEX
INDIA Not Use
198
MULTIPLE STAPLING
MACHINE MAKE
:ALMAC POLYTEX TYPE
SE
1 ALMAC POLYTEX
INDIA Working
199
FABRIC DRILLING
MACHINE MAKE
:ALMAC POLYTEX TYPE
BO
1 ALMAC POLYTEX
INDIA Working
200 POLYTEX GLUEING
MACHINE TYPE CP 1 POLYTEX AG Working
201
WATERFALL MACHINE
MAKE :POLYTEX TYPE
FB
1 POLYTEX AG Working
202
SAMPLE PINKING
MACHINE MAKE:
POLYTEX TYPE ZE-V
1 POLYTEX AG Working
203
Staubli Top Matic 4 Pattern
Knotting
Machine
M/s Staubli , India Working
204 Compre
ssor
ATLAS COPCO ZR-900
VSD COMPRESSOR With
Dryer
1 5200 CFM ATLAS COPCO Working
205 Chicago Air Compressor
with Receiver 1 400 CFM Chicago Working
206 Luwa
Humidif
COOLING TOWER
ATLAS COMPRESSOR 2 Advance Working
________________________________________________________________________________________________________
63
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
207 ication
Plant
WEAVING -I H-PLANT
OF LUWA 1
10440 M3
Volume LUWA Working
208 WEAVING -II H-PLANT
OF LUWA 1
8443 M3
Volume LUWA Working
209 WEAVING -III H-PLANT
OF LUWA 1
10440 M3
Volume LUWA
Not
Commission
210 WARPING H-PLANT OF
LUWA 1
17820 M3
Volume LUWA Working
211 WINDING H-PLANT OF
LUWA 1
5333 M3
Volume LUWA Working
212
Therma
x Boiler
BOILER
THERMAX MODEL:SM1
20DH/10.54/2,FO/NGAS
FIRE
1
12 Tonne
THERMAX -SHELL
MAX Working
213
OILON BURNER
TYPE:GRP-800ME,200-
800KG/H,CAP:2.2-9.0MW
1 OILON Working
214
Air
Handlin
g
ADVANCE MAKE
COOLING UNIT --Process 1 25 TR
WC-75000-22-T-
DCPHE-AC-CSS-MT3 Working
215
Air
Handlin
g
ADVANCE MAKE
COOLING UNIT----Process 1 10 TR
WC-30000-22-T-
CITSS-AC-CSS-T3 Working
216
Air
Handlin
g
ADVANCE MAKE
COOLING UNIT----Yarn
dyeing
1 10 TR WC-30000-22-T-
CITSS-AC-CSS-T3-R1 Working
217
ETP ,
RO &
RO,
STP,
Therma
x make
HBD SYSTEM 1
HYDRO 1V
_3P_1PT_11KW_SD
with VFD
Working
218
ETP ,
RO &
RO,
STP,
Therma
x make
HBD SYSTEM 1
Supply of
Water through
Pressure
Boosting Panel
( 2 W + 1 S )
HYDRO 2W + 1S NB
PUMPS with VFD
Panel ( M/s Jaypump )
Working
219
ETP ,
RO &
RO,
STP,
Therma
x make
HBD SYSTEM 1
Grundfos
Pressure
Boosting
system supply
water 45 m3 /
hr
HYDRO BPVS 3 X
7.5KW with VFD
Panel ( M/s Harsh
Engineering )
Working
220 D.G. Set D.G Set For Plant Lighting ( 1 250 KVA Cater Piller ( Kirloskar Working
________________________________________________________________________________________________________
64
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
DIESEL GENERATING
SET 250 KVA, CATER
PILLAR, 1500 RPM, NON
M )
)
221
Fire
Hydrant
System
D.G SET for Fire Hydrant
System 1 100 KVA
1 )KIRLOSKAR OIL
ENGINE TYPE
:6R1080,RATING
:KW/HP 82,RPM
:1800,RATING STD -
130 3046,ENGINE
NO:6H.210.4.22/09000
02. 2)RADIATOR
MAKE :BANCO
PRODUCTS,MODEL
:6RT/100KVA,PART
NO:6H.056.100.00,SR
NO:2009 08 21
Working
222 MOTOR FIRE SYSTEM 1
CROMPTON MAKE
3-PHASE
INDUCTION MOTOR
M/C NO:NADT
126,KW:55,RPM
:2955,AMP:88A,REF
:IAAN722474
Working
223
Utility
FIRE ALARM SYSTEM
OF SYSTEMTEK 1
Fire Alarm
System to Alert
any Fire in
Admin block
SYSTEMTEK Working
224 COMPRESSOR COOLING
PUMP - 2 1
KSB PUMP MEGA 80
– 315 Working
225 COMPRESSOR COOLING
PUMP - 3 1
KSB PUMP MEGA 80
– 315 Working
226 COMPRESSOR COOLING
PUMP - 4 1
KSB PUMP MEGA 80
– 315 Working
227 COMPRESSOR COOLING
PUMP MOTOR - 1 1
ABB MOTOR 3Ø
SQUIRREL CAGE
INDUCTION MOTOR
TYPE :- HX
+180MLB4
Working
228 COMPRESSOR COOLING
PUMP MOTOR - 2 1
ABB MOTOR 3Ø
SQUIRREL CAGE
INDUCTION MOTOR
TYPE :- HX
+180MLB5
Working
229 COMPRESSOR COOLING
PUMP MOTOR - 3 1
ABB MOTOR 3Ø
SQUIRREL CAGE
INDUCTION MOTOR
TYPE :- HX
+180MLB6
Working
230 COMPRESSOR COOLING 1 ABB MOTOR 3Ø Working
________________________________________________________________________________________________________
65
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
PUMP MOTOR - 4 SQUIRREL CAGE
INDUCTION MOTOR
TYPE :- HX
+180MLB7
231
ETP ,
RO &
RO,
STP,
Therma
x make
ETP Equipment & System (
2MLD CAPACITY ETP
PLANT )
1
Set
Complete Pump
with Motor &
other Asseroies
Supply M/s
Thermax
M/s Thermax Working
232
ETP Softening & Dual
Media Filter+ RO Permeate
+ RO Reject Pump System
Complete & Evaporate
System ( RO PLANT
2MLD CAPCACITY
THERMAX )
1
Set
Softening Plant
125 M3/ Hr
Qty=2,Raw
Water Pump
125 M3/hr
Qty=3, Dual
Media Filter
125M3/hr
Qty=2 & RO
Permeate
transfer &
Softening
M/s Thermax Working
233
STP Plant ( SEWAGE
TRATMENT PLANT (STP)
THERMAX CAP 35
M3/DAY )
1
Set
Cap 35 M3 /
day M/s Thermax Working
234 BOD incubetor 1 For Analysis Working
235 Furnace 1 For Analysis Working
236 Oven 1 For Analysis Working
237 COD Digester 1 For Analysis Working
238 DO Meter 1 For Analysis Working
239 Turbidity Meter 1 For Analysis Working
240 PH Meter 1 For Analysis Working
241 Weighing Balance 1 For Analysis Working
242
Stitching
and
Sewing
M/c
"REVO"MAKE 81-24Z
SINGLE NEEDLE SINGLE
THREAD
HIGH SPEED SELF
LUBRICATED MACHINE
FOR PIECE
END JOINING WITH 1/2
HP MOTOR & ALL
ACCESSR
1
243
CLOTH STICHING
MACHINE REVO MAKE
MODEL 81-24Z
1
244
CLOTH STICHING
MACHINE REVO MAKE
MODEL 81-24Z
5
245 CLOTH STICHING 2
________________________________________________________________________________________________________
66
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
MACHINE REVO MAKE
MODEL 81-24Z
246
CLOTH STICHING
MACHINE REVO MAKE
MODEL 81-24Z
5
247
CLOTH STICHING
MACHINE REVO MAKE
MODEL 81-24Z
3
248
CHAIN SEWING
MACHINE REVO C-89-
1/DA HEAVY DUTY
SINGLE NEEDLE
1
249
HANGING CHAIN STICH
SEWING MC MAKE
OLIVIA NO 3840
1
250
HEAD FOR STICHING
MACHINE REVO MODEL
81-24Z
3
251
SINGLE THREAD
ABUTTED SEAM
SEWING MACHINE,
MODEL NO. IDL 302
1
252
OVERLOCK SEWING
MACHINE REVO 81-3
HEAD ONLY
1
253
OVERLOCK SEWING
MACHINE WITH
ACCESSORIES REVO
MAKE MODEL81-3
1
254
SEWING MACHINE
USHA MAKE LOCK
STITCHING MC MODEL
8500
1
255
CHAIN SEWING
MACHINE REVO C-89-
1/DAD HEAVY DUTY
DOUBLE NEEDL
2
Non Measurable items
256 Gujarat Gas Pipe Line
Installation 1
Gas Pipe Line
Installation for
Supply of NG
Gujarat Gas Working
257 Gujarat Gas Skid 1
6Inch X 6 inch
Gas Filteration
& Pressure
Reducing Skid
As Gujarat Gas
Design
Nirmal Industrial
Control Pvt. Ltd Working
258
Charges for Piping,
Insulation and Ducting,
Fabrication, Pumps, some
________________________________________________________________________________________________________
67
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
lab equipments, Electricity
connection from GEB,
Water softining plant,
Drilling and cutting machine
etc.
Electrical installation
259
HT
Panel
HT PANEL MAKE
:AREVA 11KV Breaker AREVA Working
260 HT PANEL-1 MOTOR
FEEDER 935KW 1 11KV Breaker AREVA Working
261 HT PANEL-2 MOTOR
FEEDER 800KW 1 11KV Breaker AREVA Working
262 HT PANEL-3 O/G TRFO
FEEDER-1, 2500KVA 1 11KV Breaker AREVA Working
263 HT PANEL-4 GEN.
INCOMER -1 1 11KV Breaker AREVA Working
264 HT PANEL-5 O/G TRFO
FEEDER-2, 2500KVA 1 11KV Breaker AREVA Working
265
HT PANEL-6 AUXILARY
TRANSFORMER O/G
FEEDER -1250KVA
1 11KV Breaker AREVA Working
266 HT PANEL-7 BUS PT -1 1 11KV Breaker AREVA Working
267 HT PANEL-8 O/G TRFO
FEEDER-3, 2500KVA 1 11KV Breaker AREVA Working
268 HT PANEL-9
BUSCOUPER 1 11KV Breaker AREVA Working
269 HT PANEL-10 BUS PT -2 1 11KV Breaker AREVA Working
270 HT PANEL-11 O/G TRFO
FEEDER-4, 2500KVA 1 11KV Breaker AREVA Working
271 HT PANEL-12 O/G TRFO
FEEDER-5, 2500KVA 1 11KV Breaker AREVA Working
272 HT PANEL-13 GAS
ENGINE I/C 1 11KV Breaker AREVA Working
273 HT PANEL-14 O/G TRFO
FEEDER-6, 2500KVA 1 11KV Breaker AREVA Working
274 HT PANEL-15 MOTER
FEEDER 800KW (B) 1 11KV Breaker AREVA Working
275 HT PANEL-16 SPARE
BUS COUPLER 1 11KV Breaker AREVA Working
276 Battery
Bank
Battery Bank of Source 110
VDC Make : Amaraja 1 Make : Amaraja Working
277 LT
Panel
LT PANEL MAKE
:HORIZON 1
11kv / 433 LT
Breaker ( 4000
A - 2 Nos +
2000 A -13 Nos
) ACB
HORIZON
MICROTECH PVT
LTD
Working
278
LT
Panel
Breaker
ACB 3WL 4000A Siemens 5
3WL 4000A 4P
ED0 Size-2,
ACB,
M/S SIEMENS
LIMITED
Not
Commissioned
________________________________________________________________________________________________________
68
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
s Icc=80KA,
Protection
Release -
without release,
Motor &
closing coil
rated at
230V AC,
Shunt release
rated at 24V
DC,
Accessories -
Safety Shutter,
2N0+2NC Aux
contact, Door
Sealing
Frame, Release
Cover only
279 ACB 3WL 2000A Siemens 7
3WL 2000A 3P
MDO ACB,
lcs=lcu=IOOK
A, lew for lsec
= 80KA
Protection
Release -
E'rU27B(LSIN
G), Shunt
release rated at
24V DC,
Accessories -
Safety Shutter,
2NO+2NC
M/S SIEMENS
LIMITED
Not
Commissioned
280
Transfor
mers
TRANSFORMER NO:1 -
11KV/433V,2500KVA,SRN
O-D7797
1 25000KVA,11/
0.433 kV AREVA Working
281
TRANSFORMER NO:2 -
11KV/433V,2500KVA,SRN
O-D7796
1 25000KVA,11/
0.433 kV AREVA Working
282
TRANSFORMER NO:3 -
11KV/433V,2500KVA,SRN
O-D7795
1 25000KVA,11/
0.433 kV AREVA
Not
Commissioned
283
TRANSFORMER NO:4 -
11KV/433V,2500KVA,SRN
O-D7794
1 25000KVA,11/
0.433 kV AREVA
Not
Commissioned
284
TRANSFORMER NO:5 -
11KV/433V,2500KVA,SRN
O-D7793
1 25000KVA,11/
0.433 kV AREVA
Not
Commissioned
285
TRANSFORMER NO:6 -
11KV/433V,1250KVA,SRN
O-D7825
1 1250KVA,11/0.
433 kV AREVA
Not
Commissioned
________________________________________________________________________________________________________
69
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
286
TRANSFORMER NO:7 -
11KV/506V,1250KVA,SR
NO:10210702506
1 1250KVA,11/0.
500 kV
PAVWELS - ATLAS
COPCO ( RECEIVED
WITH ZR-900
COMPRESSOR )
Working
287
APFC
Panel
APFC 550 KVAR PANEL
1 MAKE :NEPTUNE 1
550 kvr
capacitor bank
for
improvement of
power factore
NEPTUNE SYSTEMS
PVT LTD Working
288 APFC 550 KVAR PANEL
2 MAKE :NEPTUNE 1
550 kvr
capacitor bank
for
improvement of
power factore
NEPTUNE SYSTEMS
PVT LTD Working
289 APFC 550 KVAR PANEL
3 MAKE :NEPTUNE 1
550 kvr
capacitor bank
for
improvement of
power factore
NEPTUNE SYSTEMS
PVT LTD Working
290
Panel
STABILIZER NO :1
500KVA MAKE:SUVIK 1
Supplyitg
Constant
Voltage 380 V
A.C Output
SUVIK
ELECTRONICS PVT
LTD
Working
291 STABILIZER NO :2
500KVA MAKE:SUVIK 1
Supplyitg
Constant
Voltage 380 V
A.C Output
SUVIK
ELECTRONICS PVT
LTD
Working
292
STABILIZER NO :3
250KVA MAKE:SUVIK
VS 32250C
1
Supplyitg
Constant
Voltage 380 V
A.C Output
SUVIK
ELECTRONICS PVT
LTD
Working
293
STABILIZER NO :4
250KVA MAKE:SUVIK
VS 32250C
1
Supplyitg
Constant
Voltage 380 V
A.C Output
SUVIK
ELECTRONICS PVT
LTD
Working
294
PDB-2 FOR PROCESS
MACHINE MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
295
PDB-4 FOR PROCESS
MACHINE MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
296
PDB-6 FOR WEAVING
MACHINE MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
297
PDB-7 FOR WARPING
MACHINE MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
298
PDB-8 FOR WINDING
MACHINE MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
________________________________________________________________________________________________________
70
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
299
PDB-9 FOR YARN
DYEING MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
300 PDB-10 FOR ETP MAKE
:HORIZON 1
HORIZON
MICROTECH PVT
LTD
301 PDB-11 FOR POWER
PLANT MAKE :HORIZON 1
HORIZON
MICROTECH PVT
LTD
302
MLDB 1 FOR PLANT
LIGHTING MAKE
:COTMAC
1
Lighting
Distrubution
Main Panel in
LT Room
COTMAC
ELECTRONICS PVT
LTD
303
SLDB 1 FOR PROCESS
LIGHTING MAKE
:COTMAC
1 Process
Lighting
COTMAC
ELECTRONICS PVT
LTD
304
SLDB 2 FOR
COMPRESSOR MAKE
:COTMAC
1 Compressor
COTMAC
ELECTRONICS PVT
LTD
305 SLDB 3 MAKE :COTMAC 1 Admin Block
COTMAC
ELECTRONICS PVT
LTD
306
SLDB 4 FOR PROCESS
LIGHTING MAKE
:COTMAC
1 Process
Lighting
COTMAC
ELECTRONICS PVT
LTD
307
SLDB 5 FOR
PREPARATORY MAKE
:COTMAC
1 Winding
Lighting Supply
COTMAC
ELECTRONICS PVT
LTD
308 SLDB 6 FOR PROCESS
MAKE :COTMAC 1
Process
Lighting
COTMAC
ELECTRONICS PVT
LTD
309
SFU 800A PANEL FOR
ZR900 COMPRESSOR
MAKE : COTMAC
1
SFU Switch for
Supply Power
to Compressore
COTMAC
ELECTRONICS PVT
LTD
310
MCC PANEL FOR
COMPRESSOR UTILITY
MAKE :COTMAC
1
MCC Panel for
Supply for
Utilities Pump
COTMAC
ELECTRONICS PVT
LTD
311
LDB 1 PANEL FOR
WEAVING MACHINE
MAKE :COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
312
LDB 2 PANEL FOR
WEAVING MACHINE
MAKE :COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
313
LDB 3 PANEL FOR
WEAVING MACHINE
MAKE :COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
314
LDB 4 PANEL FOR
WEAVING MACHINE
MAKE :COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
________________________________________________________________________________________________________
71
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
315
LDB 5 PANEL FOR
WEAVING MACHINE
MAKE :COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
316
LDB 6 PANEL FOR
WEAVING MACHINE
MAKE:COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
317
LDB 7 PANEL FOR
WEAVING MACHINE
MAKE:COTMAC
1
Weaving
Machinaries
MCB Panel
COTMAC
ELECTRONICS PVT
LTD
318
LDB 8 PANEL FOR
WEAVING MACHINE
MAKE :COTMAC
1
Weaving
Overhead MCB
Panel
COTMAC
ELECTRONICS PVT
LTD
319 ETP MCC PANEL MAKE
:THERMAX 1
M/s Thermax
Supply MCC
Panel for
Supplying
power to ETP
Utilities
DIVISION SWITCH
GEAR & CONTROL
PRIVATE LIMITED
Supplied by M/s
Thermax
320
TFO&ASMB MCC-
WINDING MACHINE
SUPPLY
1
Winding
Machines
Supply Panel
HORIZON
MICROTECH PVT
LTD
321 AIRJET MCC PANEL
MAKE :HORIZON 1
Weaving Panel
Room
HORIZON
MICROTECH PVT
LTD
322 HUMIDIFICATION MCC
MAKE :HORIZON 1
Weaving H
Plant
HORIZON
MICROTECH PVT
LTD
323 O/H CLEANER MCC
MAKE:HORIZON 1
Weaving Panel
Room
HORIZON
MICROTECH PVT
LTD
324 BOILER MCC MAKE
:HORIZON 1
HORIZON
MICROTECH PVT
LTD
325 O/H CLEANER MCC
MAKE:HORIZON 1
HORIZON
MICROTECH PVT
LTD
326 CRP MCC MAKE
:HORIZON 1
HORIZON
MICROTECH PVT
LTD
327 PLATING MACHINE
MCC MAKE:HORIZON 1
HORIZON
MICROTECH PVT
LTD
328 FINAL TEST LAB MCC
MAKE :HORIZON 1
HORIZON
MICROTECH PVT
LTD
329 AUTO QUATRO MCC
MAKE :HORIZON 1
HORIZON
MICROTECH PVT
LTD
330 INSPECTION MACHINE 1 1 HORIZON
________________________________________________________________________________________________________
72
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
MCC MAKE :HORIZON MICROTECH PVT
LTD
331 TFO&ASMB MCC MAKE
:HORIZON 1
HORIZON
MICROTECH PVT
LTD
332 INSPECTION MACHINE 2
MCC MAKE :HORIZON 1
HORIZON
MICROTECH PVT
LTD
333 INSPECTION MACHINE 3
MCC MAKE :HORIZON 1
HORIZON
MICROTECH PVT
LTD
334 SAMPLE WARPER MCC-
LT ROOM 1
HORIZON
MICROTECH PVT
LTD
335
SOFTNER/HBB MCC-FOR
SIZING KITCHEN
MACHINE MAKE
:HORIZON
1
HORIZON
MICROTECH PVT
LTD
336 SIZE KITCHEN PANEL
1&2 MAKE:K.B.SONS 1 MAKE : K.B .SONS
337
STRTER PANEL 3 FOR
CHILLED WATER MAKE
:COTMAC
1
COTMAC
ELECTRONICS PVT
LTD
338 STARTER PANEL 2 FOR
CRP MAKE :COTMAC 1
COTMAC
ELECTRONICS PVT
LTD
339
GRUNDFOS PRESSURE
BOOSTING PUMP PANEL
1 MAKE :GRUNDFOS /
JAY PUMP SYSTEM
1 JAY PUMPS P LTD
340
CONTROL PANEL
FORWATER
TREATMENT PLANT-
PART NO-
WH823JCP02,D.G.NO-
WSH823JCP2
1 THERMAX
341
CONTROL PANEL
FORWATER
TREATMENT PLANT-
PART NO-
WH823JCP01,D.G.NO-
WSH823JCP1
1 THERMAX
342
FIRE FIGHTING PANEL
IN FIRE HOUSE MAKE
:AKHIL
1 AKHIL INDUSTRIS
343 FIRE ENGINE CONTROL
PANEL 1 AKHIL INDUSTRIS
Power Plant
344 Power CVL BOILER Complete 1 12000KG/HR STEAM Not
________________________________________________________________________________________________________
73
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
Plant System GENERATOR
12600KG/HR@100
Deg C F & A,STEAM
PRESSURE SAFETY
VALVE
:10.54KG/CM2G,WO
RKING PRESSURE
10KG/CM2,STEAM
TEMP: SATURATED
184 DEG C,TYPE OF
BOILER : WATER
TUBE,NATURAL
CIRCULATION.
Commissioned
345 Gas
Turbine
Power accessories of Gas
Turbine power plant 1 5.4 MW
Auxiliary Panel and
Main supply panel
Not
Commissioned
346
Gas
Compre
ssor
SCREW GAS
COMPRESSOR 1
Type EGS –S-
100/300 W (
Screw Type )
MODEL/TYPE-EGS-
S-100/300, MEDIUM
GAS SUCTION
PRESURE/TEMP: 1.5
BAR/35. Discharge
Pr/Temp – 18 Bar/60,
Nominal Flow Rate at
Nominal Condition/
Suction Flow –
2200NM3/HR(880/m3/
hr), Power at coupling-
265 KW, Rotating
Speed-2980 RPM,
Year of Const - 2008
Not
Commissioned
347
Tank &
Storage
system
ALFA LEVEL MANUAL
CLEANING TYPE
CENTRIFUGAL
SEPERATOR MODEL
MAB 206
1 M/s Alfa Level
348 F.O. STORAGE TANK 1 90 KL FUEL STORAGE
349 HSD. STORAGE TANK 1 250 KL FUEL STORAGE Not
Commissioned
350 HSD. STORAGE TANK 1 20 KL FUEL STORAGE Not
Commissioned
351 F.O. STORAGE TANK 1 10KL FUEL STORAGE
352 Thermax 400 TR CHILLER
+ Complete Motor System 2 400 TR
Model: Thermax 90
NOSO,400 TR.241.9
M3/HR
Not
Commissioned
353 AIR COMPRESSOR GX-3
F F + Receiver 2
5.3
L/S.(11.23006
FT3/MIN,19.08
M3/HR)
ATLAS COPCO Not
Commissioned
354
355 Office
Equipm
ELECTRIC GIZER
ALMONARD MAKE - 10 1.00 10 Ltr Make : ALMonard Working
________________________________________________________________________________________________________
74
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
ents LTR
356 GYSER ELECTRIC 35
LTR CAPACITY 1.00 35 Ltr Working
357 GYSER ELECTRIC 35
LTR CAPACITY 1.00 35 Ltr Working
358 Nilfisk CA 551 6 Floor Cleaing Macine Working
359 Nilfik P 3 -30 2 Working
360 Attix 961-01 2 Working
361
Nilfisk High Speed
Burnisher DR 1500H (
Viper )
2 Working
362 Nllfisk R305 ( CFM R 305 ) 2 Working
363
Industrial Vaccum Cleaner
for Dry Model GS 83 Cotton
EU 220-240v Tech Spec.
1 Working
364
AQUA GUARD PURE
CHILL (COOLING
CAPACITY 80
LTR/STORAGE
CAPACITY 120 LTR)
MODEL 120 PSS
6 Capacity 80 Ltr /Hr Working
365 Advance Panel A.C for
Process Panel Cap :2000W 20
Panel Cooling
Purpose Working
366 Advance Panel A.C for
Process Panel Cap :3000W 5
Panel Cooling
Purpose Working
367
AC
WINDOW AIR
CONDITIONER 1.5 TON
BLUE STAR WAE181YA
10.0
0 Old
368
3 STAR,1.5 TR SPLIT AIR
CONDITIONERS.MODEL
NO.3HW181YB
5.00 Old
369
3 STAR 1.5 TR SPLIT AIR
CONDITIONER WITH
COR-
DLESS REMOTE, MODEL
3HW181YB
6.00 Old
370
3 STAR 1.5 TR SPLIT AIR
CONDITIONER WITH
CORDLESS REMOTE
MODEL - 3HW181YC
5.00 Old
371
3 STAR,1.5 TR SPLIT AIR
CONDITIONERS..3HW181
YB
2.00 Old
372
3 STAR,2.0 TR SPLIT AIR
CONDITIONERS.MODEL
NO.3HW241YB
2.00 Old
373
3 STAR 2.0 TR SPLIT AIR
CONDITIONER WITH
COR-
1.00 Old
________________________________________________________________________________________________________
75
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
DLESS REMOTE, MODEL
3HW241YB
374
3 STAR 2.0 TR SPLIT AIR
CONDITIONER WITH
CORDLESS REMOTE
MODEL - 3HW241YC
1.00 Old
375
3 STAR 2.0 TR SPLIT AIR
CONDITIONER WITH
CORDLESS REMOTE
MODEL - 3HW241YC
2.00 Old
376
3 STAR 2.5 Tr. SPLIT AIR
CONDITIONER WITH
CORDLESS REMOTE/3
PHASE
2.00 Old
377
AIR CONDITIONER
WITH CORDLESS
REMOTE 3.0 TR
MEGA SPLIT, MODEL
MHWE 361 RB, SR.NO.
IDU361-
RB0900132,133
2.00 Old
378
3 STAR,3.0 TR SPLIT AIR
CONDITIONERS.MEGA
SPLI/3PHASE
1.00 Old
379
SAMSUNG WINDOW
A/C(1.5)TON
M.NO.AWT18QKA
1.00 Old
380
SAMSUNG MAKE
WINDOW AIR
CONDITIONER 1.5 TON
CAP MODEL 18 ZKA
1.00 Old
381
SAMSUNG MAKE
WINDOW AIR
CONDITIONER 1.5 TON
CAP MODEL 18 ZKA
3.00 Old
382 WINDOW A/C 2 TON
SAMSUNG MODEL AW24 1.00 Old
383 SPLIT A/C 1.5 TON MAKE
SAMSUNG MODEL FK-18 1.00 Old
384 SPLIT A/C 1.5 TON MAKE
SAMSUNG MODEL FK-18 5.00 Old
385
BLUE STAR MAKE 1
STAR RATED ENERGY
EPPICIENT
WINDOW TYPE AIR
CONDITIONER, MODEL -
WAE 181YB, CAP - 1.5 TR
2 Old
386 Furnitur
e &
IND310,60T 1 60T Mettler Toledo Working
387 MINICAT 1 600KG Mettler Toledo Working
________________________________________________________________________________________________________
76
Sr. No. Section Name of the machine Qty Installed
Capacity
Other Technical
Specifications if any
Working / not
working
388 Fixtures BBK422- 3X5 1 3.1KG Mettler Toledo Working
389 BBK422- 3X5 1 7.1KG Mettler Toledo Working
390 IND690 1 32KG Mettler Toledo Working
391 JL503-C5/03 1 102 Gms Mettler Toledo Working
392 PG4002-S DELTA RANGE 1 4.1KG Mettler Toledo Working
393 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working
394 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working
395 MINICAT 1 600KG Mettler Toledo Working
396 RW11-3220-044 1 6KG Mettler Toledo Working
397 RW11-3220-044 1 6KG Mettler Toledo Working
398 RW11-3220-044 1 6 KG Mettler Toledo Working
399 PCA320-1 1 1000KG Mettler Toledo Working
400 PCA320-1 1 1000KG Mettler Toledo Working
401 MINICAT 1 600KG Mettler Toledo Working
402 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working
403 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working
404 PG4002-S DELTA RANGE 1 4.1KG Mettler Toledo Working
405 ML204/A01 1 220 Gms Mettler Toledo Working
406 BBK422- 3CS 1 3.1KG Mettler Toledo Working
407 IND690 1 32KG Mettler Toledo Working
408 MINICAT 1 200KG Mettler Toledo Working
409 RW11-4220-044 1 15 KG Mettler Toledo Working
410 RW11-4220-044 1 15 KG Mettler Toledo Working
411 MINICAT 1 300KG Mettler Toledo Working
412 MAG-BA-01GA 1 320 Gms PRECISA Working
413 200D 1 200 Gms DHONA Working
414 IND225 1 100KG Mettler Toledo Working
415 Computers
416
Vehicles
Maruti Ritz 1 MH-01-AX-
6379
417 Sumo Grande 1 GJ-16-AP-2163
418 Swift Dezire 1 GJ-16-AJ-4523