5 6 , c h e m i n d e l a Fl a m b è re · 3 1 3 0 0 To u l o u s e · F R A N C E · T é l . 3 3 ( 0 ) 5 6 1 3 1 8 6 8 7F a x 3 3 ( 0 ) 5 6 1 3 1 8 7 7 3 · c o m m e r c i a l @ m a j o r c o m . f r · w w w . m a j o r c o m . f r

DSA-100DVClass-D digital compact amp 2 x 100W - 4Ω

Model DSA-100DVRMS Power (W) 2 x 100

Bandwidth (Hz) ±3dB 20 to 20,000

THD < 0.05%

Signal / Noise > 90dB

Operating temperature -10°C ~ +40°C

Power source 100-240VAC 50/60Hz

Dimensions (WxHxD) (mm) 210 x 44 x 280

Weight (kg) 2.5

• Its 2 Class-D outputs can provide a power of 100W / 4Ω each.

• Its high rendering design and its cutting power supply is made to fall electrical consumption and heat emission.

• It has two adjustable gain inputs, a remote control by contact for ignition or switch off, and a high-pass filter.

• Equipped with a protection circuit against short circuits and overloads.

• 2 VCA can be connected enabling a distant and independent volume control on each output.

• This amplifier can be bridged to obtain a 200W output.

• An optional rack bracket mounting kit can be included.

BKT-DSA100D-H: 19“ rack mounting kit for 1x DSA-100DV or CPA-100 or OPT-100D

BKT-DSA100D-F: 19“ rack mounting kit for 2 devices among DSA-100DV, CPA-100 and PT-100D

482 mm

Rear panel

VCA-100: wall mount control volume deck (optional)

Model VCA-100Volume knob 10 kΩ (log curve)Operating temperature -10°C to +40°CHumidity 0% - 90%Dimensions (WxHxD) (mm) 70 x 114 x 33Weight 71 g

• The VCA-100 is a wall mount deck that allows you to control the master volume of your amplifier remotely with a simple 3 wires cable.