dräger technical training north america - · pdf filedräger technical training ......

Dräger Technical TrainingNorth AmericaOptimizing productivity and safety

2018 / January - June

ANESTHESIAVENTILATIONWARMING THERAPYMONITORING & HEALTHCARE IT

Draeger, Inc. has been accredited as an Authorized Provider by the

International Association for Continuing Education and Training (IACET),

11130 Sunrise Valley Drive, Suite 350, Reston, VA 20191; (703) 234-4065.

D-5

7022

-201

4

CONTENTS

Introduction 03

GeneralInformation 04-05

TravelandHotelInformation 06

Anesthesia 07

Ventilation 08

WarmingTherapy 09

Monitoring&HealthCareIT 10–13

CourseCodesandSchedules 14–15

Registration 16–17

D-5

2654

-201

2

02 |

Our education and training tools make the most of your resources. We offer a modular approach to education and training in three different areas – from basic device training to application know-how and management knowledge skills. With improved equipment knowledge and user’s skills, equipment can be used more effectively and confidently. Enhancing management knowledge skills empowers managers and staff to improve care processes.

Dräger is committed to providing technical training courses designed to assist you in meeting your obligations of providing productivity and safety with Dräger quality products and Dräger user and maintenance courses.

THE DRÄGER TRAINING MISSION

It is our goal to enhance the knowledge and proficiency of our customers on the maintenance and service of their Dräger products.

Technology for Life

The expression “Technology for Life” has more behind it than just excellent equipment. We understand the support required to be successful. Dräger Training plays a major role in enhancing care processes. Our holistic approach includes exceptional support capabilities, which help ensure that your care processes run as smoothly and efficiently as possible. After all, equipment provided for life support requires capable personnel for proper operation and service.

Comprehensive

Education

| 03

General Information

LANGUAGE, SCHEDULE, DRESS CODE

All Dräger technical education courses are conducted using the English language and begin promptly at 8:30 a.m. (classrooms open at 8:00 a.m.) and end at 4:30 p.m. every day. Dress code is business casual. No shorts or open toe shoes are permitted.

PRE-REQUISITES AND CONTENT

The courses are designed with the idea that the participants have been exposed to the general function of the product(s) being discussed.

Dräger does not perform component repairs to printed circuit board assemblies in the field and accordingly does not recommend the participant doing so. Component repairs are done only at Dräger’s manufacturing plant by specifically trained technicians, using appropriate and sophisticated test fixtures and equipment. All courses have been designed with this philosophy in mind.

All Dräger training personnel are full-time employees of Draeger, Inc. They are not paid spokespeople for any additional third party product or service. By attending this training, it is understood that the academic focus will be on the Dräger equipment that is currently (or soon to be) in possession of or contractually managed by the trainee’s employer.

COPYRIGHT

Dräger Technical Training is proprietary and all content is the property of Draeger, Inc. What you see and hear during all Dräger technical courses are copyrighted and audio and video recordings are not permitted.

TUITION

Your tuition payment covers the cost of all course materials, instruction, lunch and refreshments. Prices are subject to change without notice. All travel, expenses and hotel accommodations, including meals outside of Dräger, are the sole responsibility of each registered participant. Tuition payment MUST be provided at the time of registration.

REGISTRATION AND CONFIRMATION

Seminar space is limited and students are enrolled on a first-come, first-served basis. A letter of confirmation will be sent to the registrant via U.S. Mail, fax or email to confirm registration. Read this letter carefully. If corrections are needed, contact our Triage Center immediately.

EQUAL OPPORTUNITY STATEMENT

Dräger is an equal opportunity employer and educator. Dräger does not discriminate against otherwise qualified learners on the base of race, color, creed, religion, sexual orientation, gender identity, ancestry, national origin, age, disability, veteran status, marital status, or any other characteristic protected by law.

COURSE MATERIALS

All technical service manuals and service-related materials are in electronic format only. Each student will receive a one year license (from the date training was completed) to Basic ServiceConnect® which provides access to the technical documentation for which the student is trained. A signed license agreement is required to access Basic ServiceConnect® and is available for purchase beyond the first year. For minimum computer requirements and a brief description of the ServiceConnect® software and additional forms required to receive this software, please contact the DrägerService® Triage Center at 800-437-2437, option 4.

TESTING

Each course concludes with a timed written or practical exam. Seminar participants must attain a grade of 70% or better to satisfactorily complete each course. Certificates and Continuing Education Units (CEU’s) are only issued following satisfactory completion for the course. A grade transcript will be issued upon request for a nominal fee.

Those participants that attain a grade less than 70% can retest for a $300.00 administrative fee which can be taken the same day (time permitting) or within a six month period.

Attendance and successful completion of a technical education course does not guarantee that the participant may purchase parts for repair or replacement from Dräger. Nor does it imply that the participant has a complete working knowledge of Dräger equipment. It is the institution’s responsibility to determine the technical aptitude of the technician.

Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student for installation or configuration of Dräger’s complex systems. The courses are designed to provide basic information for first call troubleshooting and basic repairs. These systems should be installed by an appropriately trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.

04 |

TRAINING RECORDS

All Dräger training events are registered with a permanent training database. A record of student attendance is available (what course, where offered, when conducted) upon written request only from the learner who attended the course. Training records are not released to any.third party or employer per Dräger’s training privacy policy. Please contact DrägerService® Triage Center at 800-437-2437, option 4 for more information regarding transcripts.

CANCELLATION POLICY

Substitute attendees are not permitted. Training either purchased by a healthcare institution or included in a strategic alliance agreement, may only be used by individuals directly employed by that healthcare institution.

Cancellations received, in writing, 15 business days prior to the course will not be billed for the seminar. A fee of 50% of the total tuition will be charged for cancellations less than 15 business days of the scheduled seminar date. Please note that if you do not cancel in writing and do not attend, you are still responsible for payment. Dräger reserves the right to cancel or change the course dates due to low enrollment or other unforeseen circumstances. If Dräger cancels a course, you will be provided with a minimum of 15 business day’s notice and the full tuition will be refunded or applied toward any future course. Cancelled students will be placed on a priority list for the next available course. Dräger cannot be held liable for non-refundable travel expenses in the event of a course cancellation.

| 05

TRAVEL

All travel expenses and reservations including airline, rental car and hotel accommodations are the responsibility of the participant. Lunches on seminar days are provided and included as part of the tuition fees.

To allow for adequate travel time to the airport, departing flights should not be scheduled less than three (3) hours following the conclusion of the course. All seminars end no earlier than 4:30 p.m. on the final day.

Participants are responsible for arranging their own transportation to and from the airport and the Dräger facilities. Information concerning rental cars should be obtained from your travel service provider.

Our corporate facilities are access badge controlled and students should report to the main lobby upon their initial arrival on the first day of the seminar to obtain a visitor badge.

The Telford, PA (USA) Training Center is located approximately 45 miles northwest of Philadelphia International Airport and approximately 35 miles south of Lehigh Valley International Airport. The corporate address is:

Draeger, Inc. 3135 Quarry Rd.Telford, PA 18969

The Mississagua, ON (Canada) Training Center is located approximately 1 mile southeast of Toronto Pearson International Airport. The corporate address is:

Draeger Medical Canada, Inc.2425 Skymark Ave, Unit 1&2Mississauga, ON L4W 4Y6

HOTEL ACCOMMODATIONS

(These locations are suggestions – the participant is not required to stay at these facilities)

Near the Telford, PA (USA) Training Center

Near the Mississuagua, ON (Canada) Training Center

Travel & Hotel Information

Staybridge Suites (215) 393-8899119 Garden Golf Boulevard · North Wales, PA 19454.

Homewood Suites (215) 362-64001200 Pennbrook Parkway · Lansdale, PA 19446

Holiday Inn Express (215) 529-79791918 John Fries Highway · Quakertown, PA 18951

Hampton Inn (215) 536-7779 1915 John Fries Highway · Quakertown, PA 18951

Spring Hill Suites (215) 529-68001930 John Fries Highway · Quakertown, PA 18951

Marriott Courtyard - Montgomeryville (215) 699-7247544 Dekalb Pike · North Wales, PA 19454

Residence Inn - Montgomeryville (267) 468-01111110 Bethlehem Pike · North Wales, PA 19454

Homewood Suites Toronto Airport (416) 646-46005515 Eglinton Avenue West · Toronto, ON M9C 5K5

TownePlace by Marriott-Airport (800) 257-30005050 Orbitor Drive · Mississauga, ON L4W 4X2

Residence Inn by Marriott Mississauga (905) 602-77775070 Creekbank Road · Mississauga, ON L4W 5R2

06 |

FABIUS® MRI CEU’S: 0.6

DAYS P/N COURSECODE COST*USD PREREQUISITE(WITHIN3YEARS)

1.0 1902535 DSU3022NET $1,872.00 FabiusFamily

This course is designed to introduce the biomedical professional to the Fabius MRI anesthesia machine. This course will focus on the differences between the Fabius MRI and the rest of the Fabius family. Included will be disassembly and reassembly of the unit and a complete peruse checkout. This course is designed as an experiential exercise with presentations on the MRI environment. An instructor is present at all times to assist and answer questions.

APOLLO® CEU’S: 3.0

DAYS P/N COURSECODE COST*USD PREREQUISITE

5.0 1902156 DSU3081NET $10,970.00 None

During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Apollo anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate).

PERSEUS® CEU’S: 3.0


5.0 MQ09298 DSU3087NET $9,559.00 None

During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Perseus anesthesia machine. This anesthesia system incorporates additional ventilation features not found on other anesthesia equipment. This course includes instruction on pneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate).

Anesthesia

FABIUS® FAMILY CEU’S: 2.4


4.0 1902166 DSU3021NET $5,735.60 None

This course is designed to introduce the biomedical professional to the Fabius family of anesthesia machines. All of these anesthesia machines incorporate ventilation features and hardware not found on other anesthesia devices, as well as new technologies in the gas delivery system. The course includes instruction on the pneumatic and absorber systems, ventilator, monitor technologies, and a detailed Preventive Maintenance Inspection procedure.

PRIMUS: CEU’S: 3.0


5.0 MQ00230 DSU3084NET $10,970.00 None

During this course, the biomedical professional will receive information about the advanced technologies associated with the Primus anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator and monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). Canada location only.

VAPOR FAMILY CEU’S: 0.6


1.0 1902159 DSU3061NET $1,054.00 None

This course is designed to introduce the biomedical professional to the distinctive characteristics of both the Dräger Vapor 2000 and 3000. This course will include how to dismount and to mount the components and assemblies according to the maintenance and repair section in ServiceConnect®. The participant will also learn how to do the inspection and output test verification.

| 07

Ventilation

EVITA® 4 / EVITA® 2 DURA / EVITA® XL CEU’S: 3.0


5.0 1902146 DSU3213NET $3,800.16 None

This course will highlight the built-in diagnosis and upgrading tools of the Evita series. The student will become skilled in identifying assemblies/ sub-assemblies and gain a depth of knowledge and understanding of the functions and basic troubleshooting of these devices. Upon successful completion of this course, the student will be able to identify and understand the functions of the detachable user interface (Evita 4 / XL), the integrated interface (Evita 2), and the pneumatic and electrical systems (Evita 4 / 2 / XL). The student will also be able to demonstrate competence in performing a scheduled Preventive Maintenance Inspection.

CARINA® CEU’S: 0.6


1.0 1979851 DSU3215NET $2,043.60 None

Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of the Carina ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly and repair of this device. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection.

EVITA® INFINITY® V500 / BABYLOG® VN500 CEU’S: 3.0


5.0 MQ00231 DSU3212NET $3,864.64 None

During this course, students will become skilled in identifying assemblies/subassemblies and enhance their knowledge and understanding of device functions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identify and understand the functions of the pneumatic and electrical systems of the V500 and VN500, including the Human Interface Testing (HIT) software and the optional gas supply unit (GS500). The student will also learn how to perform a scheduled Preventive Maintenance Inspection.

NOTE: A LAPTOP IS NOT REQUIRED DURING THIS SEMINAR. However, working with the V500/VN500 requires the participant to have a laptop computer to perform troubleshooting and the PMI procedure. The laptop must have the following capabilities: Microsoft® Windows® XP or later/NT SP6, NOT including Windows Vista® or Windows 7; Adobe® Acrobat® 7.0 or higher; Intel® Pentium® 4 or higher processor with at least 512 MB of RAM; DVD-ROM drive capable of reading dual-layered DVD’s; access to an email account.

OXYLOG® 3000 / OXYLOG® 3000+ CEU’S: 0.6


1.0 1902152 DSU3273NET $2,043.60 None

Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of the Oxylog 3000 ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection.

SAVINA® CEU’S: 0.6


1.0 1902165 DSU3222NET $930.80 Savina300

This course will highlight the built-in diagnosis and upgrading tools of the Savina. The student will become skilled in identifying assemblies/sub-assemblies and gain a depth of knowledge and understanding of the device functions through various lecture and hands-on exercises. Upon successful completion of this course, the student will be able to identify and understand the functions of the operator control panel and the pneumatic and electrical systems. The student will also be able to complete a Preventive Maintenance Inspection, perform basic troubleshooting and operation verification.

SAVINA® 300 CEU’S: 1.8


3.0 MQ00177 DSU3223NET $3,346.72 None

This course is designed to provide the biomedical professional with specific information related to the Savina 300 operating functions which differ from the Savina ventilator. Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electrical systems and be familiar with the Preventive Maintenance Inspection.

08 |

OPEN WARMING THERAPY SYSTEMS CEU’S: 0.6

CLASS DAYS P/N COURSECODE COST*USD PREREQUISITE(WITHIN3YEARS)

Babytherm®8004/8010 1.0 1902145 DSU3550NET $2,106.00 None

RadiantWarmer 1.0 1979824 DSU3540NET $2,106.00 NoneandResuscitaire®BirthingRoomWarmer

Upon successful completion of any one of these courses, the student should be able to identify and understand the functions of the heating, controlling and monitoring systems. The student will also be able to troubleshoot and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection.

CLOSED WARMING THERAPY SYSTEMS CEU’S: 1.2


Caleo® 2.0 1902164 DSU3560NET $2,714.40 None

Isolette®C2000& 2.0 1902175 DSU3530NET $2,714.40 NoneIsolette®8000

TI500 Globe-Trotter® 2.0 1902177 DSU3495NET $2,714.40 NoneNeonatalTransportSystem

Upon successful completion of any one of these courses, the student will be able to identify and understand the functions of the ventilation (Globe-Trotter only), heating, humidifying, controlling, O2 supply, power supply and monitoring systems. The student will also be able to troubleshoot the equipment and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection.

Warming Therapy

INCUWARMER CEU’S: 1.8


Babyleo®TN500 3.0 1903324 WWDCHT05EN $3995.00 None

During this course, students will become skilled in identifying assemblies/sub-assemblies and enhance their knowledge and understanding of device functions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identify sub-assemblies and understand the functions of the Babyleo TN500, including function on the Open and Closed modes and the Human Interface Testing (HIT) software. The student will also learn how to perform a scheduled Preventive Maintenance Inspection.

| 09

Monitoring & HealthCare IT

10 |

Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student for installation or configuration of Dräger’s complex systems. The courses are designed to provide basic information for first call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed, technically-trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.

NETWORK FUNDAMENTALS THEORY CEU’S: 1.2


2.0 1902805 DSU3603NET $1,000.00 None

This seminar introduces the learner to fundamental computer networking concepts and how they’re applied to the Dräger Omega and Omega-S products. This seminar is the introduction to further study in the Draeger Healthcare field. This seminar is required for networking other Dräger Monitoring and IT products.

A list of the basic networking concepts discussed and applied will be: – Networking topologies (wired), their necessary communication protocols, and terminology. – TCP/IP network configuration (addressing, subnetting and planning) and how it is applied to integrate with the Infinity Omega and Omega-S. – LAN and WAN technologies, and how Infinity Omega and Omega-S solutions integrate with each.

To fully grasp the concepts of networking in regards to the Dräger Omega and Omega-S products it is highly recommended that the student attend this course regardless of IT skillset.

ADVANCED INFINITY® NETWORKING CEU’S: 1.8


3.0 1902536 DSU3604NET $1,500.00 *See below (within course description)

This seminar continues where the Network Fundamentals Theory seminar left off. It introduces the learner to networking concepts and how they’re applied to the rest of the Infinity® Monitoring and Healthcare IT product line. The seminar will be a combination of lecture and hands-on learning using the latest networking appliances and Dräger equipment. Each student will be required to configure multiple devices including, but not limited to, Cisco 2600 series routers, switches and a host of Draeger Infinity® products.

A list of the basic networking concepts discussed and applied will be: – Networking topologies (wireless), their necessary communication protocols, and terminology. – LAN and WAN technologies, and how Dräger’s Infinity Monitoring and Healthcare products integrate with each. – VLAN planning and application using managed switches and wireless devices. – Basic routing concepts using Cisco® devices for configuration and practical application within an Infinity network. – The student will also be challenged with a number of hands-on exercises that are centered around troubleshooting, error management and proper network

capacity usage techniques.

To fully grasp the concepts of the Infinity Monitoring and Healthcare IT product line it is highly recommended that the student attend this course regardless of IT skillset. The methods used to fully configure and integrate a Dräger device onto an Infinity network go beyond basic computer networking and configuration skills. This Advanced Infinity Networking course curriculum brings these concepts into the forefront of the lectures and hands-on exercises, and thus allowing the student to become comfortable utilizing these universal concepts in a Dräger specific way.

*Advanced Infinity Networking course prerequisites.Appropriate IT skills and/or experience needed to attend this class are as follows: – IP addressing – Network layers (OSI model) – Routing – Switches and hubs – LAN and WAN technologies – VLAN design – Network diagnostic tools and protocols – Port management and configuration

The following vendor-specific IT Certifications can be presented in lieu of not attending this course: – Cisco CCNA®

– Cisco CCNP®


| 11

In order to better support our customer’s scheduling and travelling limitations, we have realigned the monitoring classes into sequential courses (or tracks) based upon the common dispositions of Dräger equipment. See the diagram below for a clearer picture of these tracks and how they differ. Please be sure to mention them when scheduling so

that we may schedule you appropriately. Those customers that select the Omega track do NOT need to take the Advanced Infinity Networking course to join the Infinity Explorer Basic course, as required for those that are taking the IACS or Monitors tracks.


INFINITY® ACUTE CARE SYSTEM CEU’S: 3.0


5.0 MQ00250 DSU3711NET $6,068.40 AdvancedInfinityNetworking

This seminar is designed to introduce the biomedical professional to the Infinity Acute Care System (IACS) monitoring solution. The content of the seminar details the following products that make up of the IACS (C500/C700 Medical Cockpit, M540 patient monitor, M500 docking station and P2500 power supply). This seminar includes product overviews, configuration of the system, testing the operation of the system and communications troubleshooting. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical operational exercises on each unit and complete a Preventive Maintenance Inspection.

Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student for installation or configuration of Dräger’s complex systems. The courses are designed to provide basic information for first call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed, technically-trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.

INFINITY® GATEWAY CEU’S: 1.2


2.0 MQ09840 DSU3696NET $2,980.00 NetworkFundamentalsTheoryand

AdvancedInfinityNetworking

The Infinity Gateway Suite software applications are intended to provide clinicians with the capacity of viewing patient data remotely via the Infinity Network and for the data exchange of select clinical and administrative information between the Infinity Network and the hospital network.

Upon completion of this 2-day course students will be able to: – Install Infinity Gateway– Install Patient Watch– Detail HL7 and how it relates to Infinity Gateway– Detail ADT Interfaces– Detail and use troubleshooting tools associated with the Infinity Gateway Suite

INFINITY® CENTRALSTATION (VG) CEU’S: 1.8


3.0 1903170 DSU3645NET $3,640.00 AdvancedInfinityNetworking

This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the Infinity CentralStation that is running VG software, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection.

INFINITY® CENTRALSTATION (VF) CEU’S: 1.8



This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the Infinity CentralStation that is running VF software, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection.

INFINITY® EXPLORER BASIC CEU’S: 1.8


3.0 MQ00187 DSU3701NET $3,640.00 AdvancedInfinityNetworking

This seminar is intended to introduce the biomedical professional to the service-related operations, configuration and physical layouts of the Infinity C700 for IT workstation, Infinity Explorer software, and Omega solutions (Omega/Omega-S), along with its role in the Infinity Network. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and download procedures, install and configure software, install Dräger client applications, implement Microsoft® Windows® updates and hotfixes, execute repair and maintenance procedures, perform practical operational exercises on the unit and complete a Preventive Maintenance Inspection.

12 |

INFINITY® M300 TELEMETRY CEU’S: 1.2


2.0 1902532 DSU3712NET $2,427.00 InfinityCentralStation

This seminar is intended to introduce the biomedical professional to the Infinity M300 wireless patient monitor and patient-worn telemetry device. This course includes the programming and care of the Infinity M300 and the configuration of the Infinity CentralStation (ICS) as it pertains to the interaction of the M300 monitor. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance, perform practical operational exercises and complete a Preventive Maintenance Inspection.

INFINITY® MODULAR MONITOR SERIES WITH SCIO® CEU’S: 3.0



This seminar is designed to introduce the biomedical professional to the Infinity Delta/Delta XL/Kappa/Gamma XL monitors and the Scio gas module. This seminar includes instruction on the service-related operation, configuration, and NBP calibration/characterization. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical operational exercises on each unit and complete a Preventive Maintenance Inspection.

INFINITY® SYMPHONY CEU’S: 0.6


1.0 1979822 DSU3697NET $1,490.00 NetworkFundamentalsTheoryand

AdvancedInfinityNetworking

Infinity Symphony Suite is a web-based application that expands your access to valuable patient information stored on the Infinity CentralStation database by making it available virtually anywhere via the hospital network.

In this 1-day seminar participants will: – Install Infinity Symphony– Add users in Symphony– Configure Symphony with an ICS– Export Reports

INNOVIAN® ANESTHESIA SYSTEMS ADMINISTRATOR (VA) CEU’S: 1.8


3.0 MQ09814 DSU3801NET $3,485.04 Familiarity with Windows Server

This 3-day seminar is designed to expand the skills of an Innovian Systems Administrator (SA). The Innovian SA performs essential functions of maintaining the health of the Innovian Anesthesia systems. Students are expected to have knowledge of Microsoft® Windows® Active Directory®, Microsoft® SQL Server®, Microsoft® Windows® desktop operating systems, and computer hardware and software. Student outcomes for this course are monitoring of services, server health indicators, executing scripts, backup and restoration of SQL databases, and basic troubleshooting of the Innovian systems, which also includes: SQL Reporting Systems and HL7 systems.

INNOVIAN® ANESTHESIA VA BOX REPLACEMENT (VA) CEU’S: 1.2


2.0 MQ09815 DSU3802NET $2,323.36 NetworkingFundamentalsTheory

This 2-day seminar is designed to expand the skills of an Innovian Technical Service Representative. The technician performs essential functions of maintaining the health of the Clinical Workstations (CWS) and troubleshooting issues related to these workstations. Students are expected to have knowledge of Microsoft® Windows® desktop operating systems and computer hardware and software. Student outcomes for this course are replacing parts of a malfunctioning CWS, imaging a CWS, and troubleshooting related to a CWS.

| 13

14 |

2018 Seminar Dates (Jan-Jun) Dräger Technical Training

ANESTHESIA

SEMINAR COURSECODE DATE LOCATION

Apollo® DSU3081NET Feb 12 - 16 Telford, PAApollo® DSU3081NET Mar 12 - 16 Telford, PAApollo® DSU3081NET Apr 16 - 20 Telford, PAApollo® DSU3081NET May 7 - 11 Telford, PAApollo® DSU3081NET Jun 11 - 15 Telford, PA

Fabius® Family DSU3021NET Feb 5 - 8 Telford, PAFabius® Family DSU3021NET Mar 19 - 22 Telford, PAFabius® Family DSU3021NET Apr 2 - 5 Mississauga, ONFabius® Family DSU3021NET Apr 30 - May 3 Telford, PAFabius® Family DSU3021NET Jun 4 - 7 Telford, PA

Fabius® MRI DSU3022NET Mar 23 Telford, PAFabius® MRI DSU3022NET May 4 Telford, PA

Perseus® DSU3087NET Feb 19 - 23 Telford, PAPerseus® DSU3087NET Mar 26 - 30 Telford, PAPerseus® DSU3087NET Apr 23 - 27 Mississauga, ONPerseus® DSU3087NET Jun 18 - 22 Telford, PA

Primus® DSU3084NET May 14 - 18 Mississauga, ON

Vapor Family DSU3061NET Feb 9 Telford, PAVapor Family DSU3061NET Apr 6 Telford, PAVapor Family DSU3061NET Jun 8 Telford, PA

Seminars are subject to date changes or cancellation for low enrollment, please contact Dräger for confirmation. Email: [email protected] or Phone: 800-437-2437, option 4

VENTILATION


Carina® DSU3215NET Feb13 Telford,PACarina® DSU3215NET Apr25 Telford,PA

Evita® 4 / Evita® 2 dura / Evita® XL DSU3213NET Mar12-16 Telford,PA

Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Feb 5 - 9 Telford, PAEvitav Infinity® V500 / Babylog® VN500 DSU3212NET Mar 5 - 9 Telford, PAEvita® Infinity® V500 / Babylog® VN500 DSU3212NET Apr 9 - 13 Telford, PAEvita® Infinity® V500 / Babylog® VN500 DSU3212NET May 7 - 11 Mississauga, ONEvita® Infinity® V500 / Babylog® VN500 DSU3212NET Jun 4 - 8 Telford, PA

Oxylog®3000/Oxylog®3000+ DSU3273NET Feb14 Telford,PAOxylog®3000/Oxylog®3000+ DSU3273NET Apr26 Telford,PA

Savina® DSU3222NET May21-23 Telford,PASavina®300 DSU3223NET May24 Telford,PA

CLOSED WARMING THERAPY SYSTEMS


TI500 Globe-Trotter® Neonatal Transport System DSU3495NET May16-17 Telford,PA

Caleo® DSU3560NET Mar19-20 Telford,PA

Isolette® C2000 & Isolette® 8000 DSU3530NET Mar21-22 Telford,PA

| 15

MONITORING & HEALTHCARE IT


NetworkFundamentalsTheory DSU36043NET Feb5-6 Telford,PA

NetworkFundamentalsTheory DSU36043NET Mar5-6 Telford,PA

NetworkFundamentalsTheory DSU36043NET Apr 9-10 Telford,PA

NetworkFundamentalsTheory DSU36043NET Apr30-May1 Telford,PA

Advanced Infinity® Networking DSU3604NET Feb7-9 Telford,PA

Advanced Infinity® Networking DSU3604NET Mar7-9 Telford,PA

Advanced Infinity® Networking DSU3604NET Apr 11 - 13 Telford, PA

Infinity® Modular Monitor Series with SCIO® DSU3620NET Mar12-16 Telford,PA

Infinity® Modular Monitor Series with SCIO® DSU3620NET May7-11 Telford,PA

Infinity® CentralStation (VF) DSU3642NET Mar19-21 Telford,PA

Infinity® CentralStation (VF) DSU3642NET May 14 - 16 Telford, PA

IInfinity® CentralStation (VG) DSU3645NET Feb19-21 Telford,PA

nfinity® CentralStation (VG) DSU3645NET Apr 23 - 25 Telford, PA

Infinity® M300 Telemetry DSU3712NET Feb22-23 Telford,PA

Infinity® M300 Telemetry DSU3712NET Mar22-23 Telford,PA

Infinity® M300 Telemetry DSU3712NET Apr 26 - 27 Telford, PA

Infinity® M300 Telemetry DSU3712NET May 17 - 18 Telford, PA

Infinity®AcuteCareSystemMonitoring DSU3711NET Feb12-16 Telford,PA

Infinity®AcuteCareSystemMonitoring DSU3711NET Apr16-20 Telford,PA

Infinity® Explorer Basic DSU3701NET Apr4-6 Telford,PA

Infinity® Explorer Basic DSU3701NET May2-4 Telford,PA

Infinity®Gateway DSU3696NET May30-31 Telford,PA

Infinity®Symphony DSU3697NET Jun1 Telford,PA

Innovian®SystemsAdministrators(VA) DSU3801NET Feb27-28 Telford,PA

Innovian®VABoxReplacement(VA) DSU3802NET Mar1-2 Telford,PA

2018 Seminar Dates (Jan-Jun) Dräger Technical TrainingSeminars are subject to date changes or cancellation for low enrollment, please contact Dräger for confirmation. Email: [email protected] or Phone: 800-437-2437, option 4

OPEN WARMING THERAPY SYSTEMS


Babytherm® 8004/8010 DSU3550NET Apr 24 Telford, PARadiant Warmer and Resuscitaire® Birthing Room Warmer DSU3540NET Apr 25 Telford, PA

INCUWARMER


Babyleo® TN500 WWDCHT05EN Feb 27 - 29 Telford, PA

Babyleo® TN500 WWDCHT05EN Apr 3 - 5 Telford, PA

16 |

Dräger Registration FormMust be mailed, faxed or emailed to confirm enrollment Page 1 of 2

Fax or email completed form to: (215) 723-5935 or [email protected]

Name

Employer

Address

City

State

Title

Phone

Fax

Email

Zip

COURSE SELECTIONS:

Please check here if you have special needs that may affect your participation (a representative will contact you to discuss your request).

REGISTRATIONSeminarspaceislimitedandstudentsareenrolledonafirst-come,first-servedbasis.YoumaycontactourTriageCentertoverifycourseavailability.Pleasenotethedurationofeachclasswhenselectingyourcoursesasthiswilldetermineyourlengthofstay.AletterofconfirmationwillbesenttotheregistrantviaU.S.Mail,faxoremailtoconfirmregistration.Readthislettercarefully.Ifcorrectionsareneeded,contactourTriageCenterimmediately.Avalidandcompleteemailaddressrequiredforregistration.Pleasenotethatpersonalemailaddresses(Gmail,Hotmail,Yahooetc…)willnotbeconsideredasvalidforregistration.Onlythoseprovidedbytheregistrant’semployerwillbeaccepted.

TUITIONYourtuitionpaymentcoversthecostofallcoursematerials,instruction,lunchandrefreshments.Pricesaresubjecttochangewithoutnotice.Alltravel,expensesandhotelaccommodations,includingmealsoutsideofDräger,arethesoleresponsibilityofeachregisteredparticipant.TuitionpaymentMUSTbeprovidedatthetimeofregistration.

IMPORTANT: CANCELLATIONSCancellationsreceived,inwriting,15businessdayspriortothecoursewillnotbebilledfortheseminar.Afeeof50%ofthetotaltuitionwillbechargedforcancellationslessthan15businessdaysofthescheduledseminardate.Pleasenotethatifyoudonotcancelinwritinganddonotattend,youarestillresponsibleforpayment.Drägerreservestherighttocancelorchangethecoursedatesduetolowenrollmentorotherunforeseencircumstances.IfDrägercancelsacourse,youwillbeprovidedwithaminimumof15businessday’snoticeandthefulltuitionwillberefundedorappliedtowardanyfuturecourse.Cancelledstudentswillbeplacedonaprioritylistforthenextavailablecourse.Drägercannotbeheldliablefornon-refundabletravelexpensesintheeventofacoursecancellation.

CourseinstructionwillprovidethestudentwithconfidentialandproprietaryinformationofDrägerproducts.Thisinformationshallnotbereproduced,distributed,usedordisclosedinwholeorinpartunlessotherwiseauthorizedbyDrägerinwriting.

SELECTION # 1

Course Title Course Date Course Code

Course Fee USD

SELECTION # 2


Course Fee USD

SELECTION # 3


Course Fee USD

SELECTION # 4


Course Fee USD

| 17

Dräger Registration FormMust be mailed, faxed or emailed to confirm enrollment Page 2 of 2

METHOD OF PAYMENT:

Payment must accompany the registration form in order to process registration.

Purchase Order No. Today’s Date

If included with machine purchase, please list:

Purchase Order No. Sales Order No.

Fax or email completed form to: (215) 723-5935 or [email protected]

Dräger, is authorized to charge the credit card below for my seminar registration fees in the amount on this form

Mastercard Visa Amex

Credit Card Acct No. CSC/CID Code

Expiration Date

Card Holder Email Card Holder Phone

Signature of Card Holder Print Full Name

AUTHORIZATIONYes, I accept the Dräger Registration, Tuition, and Cancellation policy. The Participant that registers for and attends the seminar associated with this sales order must be an employee of the purchasing facility and may be required to show proof of employment. Registration is not transferable.

Student Signature (REQUIRED)

Signature Print Name

Student’s Supervisor Signature (REQUIRED)

Signature Print Name

Draeger, Inc. has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102; (703) 506-3275. In obtaining this approval, Draeger, Inc. has demonstrated that it complies with the ANSI/IACET Standard whichis recognized internationally as a standard of good practice. As a result of their Authorized Provider accreditation status, Draeger, Inc. is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.

For Payments and/or inquiries contact

PHONE (800) 437-2437, option 4

FAX (215) 723-5935

WEB www.draeger.com

EMAIL [email protected]

MAIL Draeger, Inc.

3135 Quarry Road · Telford, PA 18969

I am enclosing a check – made payable to “Draeger” in the amount of $

90 7

1 40

2 |

17.

12-1

| K

B |

LL

| S

ubje

ct t

o m

odifi

catio

ns |

© 2

017

Drä

gerw

erk

AG

& C

o. K

GaA

Manufacturer:Drägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germany

CORPORATE HEADQUARTERSDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germany

www.draeger.com

USADraeger, Inc.3135 Quarry Road Telford, PA 18969-1042 Tel +1 800 4DRAGER(+1 800 437 2437)Fax +1 215 723 [email protected]

CANADADraeger Medical Canada Inc.2425 Skymark Avenue, Unit 1Mississauga, Ontario, L4W 4Y6Tel +1 905 212 6600Toll-free +1 866 343 2273Fax +1 905 212 [email protected]

Locate your Regional Sales Representative at: www.draeger.com/contact

dräger technical training north america - · pdf filedräger technical training ......

Documents