dragonfire racing 3191 n washington st. suite 2 chandler ... · step 8: select music mode to play...
TRANSCRIPT
DragonFire
DragonFire Racing3191 N Washington St. Suite 2Chandler, AZ 852251 (800) 708-9803http://www.DragonFireRacing.com
Revision No: 00Revision Date: 05-14-2018
How to Use App for Light DevicesPart # 11-0019 6ft Lighted Whip “HL” Part # 11-0039 4ft Lighted Whip “HL”
HL is lasered on the base and can be found in front of part number.
DisclaimerOff road activities can be hazardous and could lead to injury, dismemberment, paralysis and death. No warranty of representation is made as to the products ability to protect the user from any injury or death. The user assumes that risk. The acceptance and /or use of this merchandise purchased from DragonFire by the customer hereby shall release DragonFire from any and all liability pertaining to the use of such merchandise.
• Read and understand these instructions before installing product• Do not use product if there are any signs of damage
SpecificationsItem Requirements
Phone/Pad OS Android 4.3 and aboveIOS 7.0 and above
Phone/Pad Bluetooth Bluetooth 4.0 Low Energy (BLE)Bluetooth Effective Range 15 meterCall ReminderSMS Reminder Android Only
Pre-installation: Refer to DragonFire Racing Website for ensure that you have the latest revision of instructions & templates.
Product FunctionsMusic ControlVoice ControlShake ControlColor Brightness ControlGroup LED’s ControlChange Light EffectCall/SMS Reminder
Happy Lighting Bluetooth App
DragonFire
Step 1: Ensure Lighted Whip is connected properly; the red wire is positive (+) and the black wire is negative (-). It is recommended that the Lighted Whip is hooked up to a rocker switch that is hooked up to the battery.
Step 2: Scan QR code and download Bluetooth App. Alternatively, search and download Bluetooth app through the phone app store.
Step 3: Install and open Bluetooth app.
Step 4: To scan, select the Group Menu Icon (Figure A).
Step 5: To manage light devices and groups, see Figure B.
Step 6: Tap or drag the color wheel to select desired color (Figure C).
Step 7: • Preset Color palettes are customizable to desired colors. To change, simply select desired color block and then select desired color on
the color wheel • Standard Color palettes are default color options and cannot be change.
GroupMenu
Settings
Mode
Power On/Off
Color WheelSwitch
Color Adjustment
CustomColor Match
PresetColor
Standard Color
DragonFire
Step 8: Select Music mode to play music with the lights. The brightness and colors will randomly change based on the music. (Figure D)
Step 9: Select Tape mode for voice control. The brightness and colors will randomly change based on ambient voice. (Figure E)
Step 10: Select Style mode for light patterns. Scroll up and down to change pattern. Slide the speed bar from left to right for minimum and maximum adjustment of pattern speed. (Figure F)
Step 11: Tap the Timing mode for timer control (Figure G). Set to desired time and tap on/off button to set.
Step 12: To access Shake function, select the settings icon (Figure H). When the Shake function is on, shake the device toward front and back to turn LED on/off and left to right to change LED color.
Note: For Android OS only - All light effects can be selected for SMS reminders.
Troubleshooting: • If having trouble connecting, check to ensure Bluetooth is active. • If the problem still persists, please reboot phone and devices. Alternatively, try other phone to ensure the problem is not
the product or apps.
ProTip: Periodically check all hardware and re-tighten if needed.
For further assistance please contact us at [email protected] or 1-800-708-9803.