Dr. CH. SRINIVASA RAOPresent Address:

Professor, Department of Mechanical Engg.,A.U. College of Engg.( Autonomous),Andhra University, Visakhapatnam -530 003,A.P. India.

Tel  +91 0891- 2844802 (Off.) Fax : 0891- 2747961 Mobile : 9440424504Email :  csrauce2019@gmail.com, profcsraoauce@gmail.comhttp://andhrauniversity.edu.in/webnew/tprofile/thankyou.php?empno=3639

Aadhaar Card No. 3621 1123 0804

PAN Number: ABFPC0354D

Date of Birth: 24-02-1966

Fathers Name: Sri Ch.H.N.V. Prasada Rao

Residential Address: Flat No:-507, Theerthu Towers, Beside MVP Public SchoolSector 10, MVP Colony, Visakhapatnam-530 017

Education: Ph.D. Andhra University, Visakhapatnam.A.P. India ---- 2004.

Thesis Topic: On-Line Assessment of Tool Wear in Turning : Diffusion Aspects

M.Tech. Engineering Materials --R.E.C. (M.A.C.T.) BHOPAL (M.P.) India. ---1991.

B.Tech. Mechanical Engineering -- Nagarjuna University (A.P.) India. ---- 1988.

Experience: 27years+Dept. of Mech. Engg., A.U. College of Engg.(Autonomous), Andhra University, Visakhapatnam.

Professor 06-10-2009 Till date Associate Professor 06-10-2006 06-10-2009

Department of Mech. Engg., GITAM, College of Engg., Visakhapatnam-530 045. Associate Professor 24-09-2002 05-10-2006 Assistant Professor -Senior scale 01-03-1999 24-09-2002

Assistant Professor 08.10.1992 01-03-1999

Research Activities----- Ph.d. Awarded—Under Progress---- Papers PublishedPh. D’s awarded: 111. “Experimental Investigations on the Performance of Al2O3 –Water Nanofluid as Radiator

Coolant in an Automobile Engine”……………. B. Ravi Sankar(7138)---2013

2. “Influence of Hard Surface Coatings of Cutting Tools and Process Parameters on Performance Measures in Turning AISI 304 Austenitic Stainless Steel”………….. M. Kaladhar (7010)---2014

3. “Investigations on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets”………….. K. Siva Prasad(7221)---2014

4. “Development of Advanced Aluminum-iIlmenite Nano composite using Stir Casting”……Lanka Rasidhar(7389)----2014

5. “Characterization of Co-Cr-Mo Alloy Deposited with Laser Engineered Net Shaping”….. Kedar Mallik Mantrala(7672)-----2015

6. “Multi-Objective Optimization of Master Production Scheduling using Evolutionary Metaheuristic Techniques” ---- Radhika Sajja (7714)----2015.

7. "Modelling and Experimental Evaluation of Surface Grinding of Tool Steels",----Venkata Vinay Pragada(7754)----2015 .

8. “Modeling and Experimental Evaluation of Hard Turning of AISI D3 and AISI H13 Steels”== Varaprasad Bhemuni (7752)----2016.

9. “Modeling and Analysis of Knee and Hip Joint”--------- Bhaskar Kumar Madeti (7971)---2017.

1

10. “Investigations on Burr Formation in drilling of aluminium alloys ”--------- Reddy Sreenivasulu (8469)---2018.

11. “Development of Product Families and Scheduling – An Integrated Frame Work”------ Abdul Munaf Shaik (8418)---2019

Ph. D’s submitted: 1, Ph. D students working at present: 15

Papers published: International Journals:154

Year-20201. R. Sreenivasulu, Ch. Srinivasa Rao, Some Investigations on Drilling of Aluminium Alloy from

FEA-Based Simulation Using DEFORM-3D Advances in Simulation, Product Design and Development Proceedings of AIMTDR 2018 Editors M. S. Shunmugam M. Kanthababu, Part of the Lecture Notes on Multidisciplinary Industrial Engineering  book series (LNMUINEN) 07 November 2019, DOI: https://doi.org/10.1007/978-981-32-9487-5_1,Publisher Name Springer, Singapore, Print ISBN978-981-32-9486-8, Online ISBN978-981-32-9487-5, pp.3-15.

2. R. Sreenivasulu, Ch. Srinivasa Rao and K. Ravindra, Effect of thrust and torque exerted during drilling to optimize exit burr height and thickness by choosing variable drill bit geometry: A simplified theoretical model approach, International Journal of Data and Network Science ISSN 2561-8156(Online)-ISSN 2561-8148(Print) doi:10.5267/j.ijdns.2019.8.003, Vol 4,(2020),pp. 43–56.

3. Radhika Sajja, K Karteeka Pavan, Ch Srinivasa Rao, Swapna Dhulipalla, Evolutionary Optimization in Master Production Scheduling: A Case Study, Advanced Engineering Optimization Through Intelligent Techniques, Evolutionary Optimization in Master Production Scheduling: A Case Study, in: Venkata Rao R., Taler J. (eds) Advanced Engineering Optimization Through Intelligent Techniques, Advances in Intelligent Systems and Computing, https://doi.org/10.1007/978-981-13-8196-6_33,Print ISBN 978-981-13-8195-9, Online ISBN 978-981-13-8196-6 vol 949. Springer, Singapore pp. 371-379.

Year -20194. Reddy Sreenivasulu and Srinivasa Rao Chalamalasetti, Applicability of Industrial Internet of

Things in Lean Manufacturing: A Brief Study, AKGEC International Journal of Technology, ISSN 0975-9514, July – December 2019, Vol. 10, No.2, pp.22-26.

5. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao Review on Investigations Carried out on Burr Formation in Drilling during 1975 to 2020, Technological Engineering, Volume XVI, number 1/2019, ISSN 1336 – 5967, DOI: 10.1515/teen-2019-0007, pp.43-57.

6. K. Anupama Francy, Ch Srinivasa Rao, P. Gopalakrishnaiah, Optimization of Direct extrusion Process Parameter on 16MnCr5 and AISI1010 using DEFORM-3D Procedia Manufacturing, ISSN: 2351-9789, Copyright © 2019 Elsevier, Vol.30 (2019), pp.498–505.

7. Swapna D., Srinivasa Rao Ch., Kumar S., Radhika S. AHP and TOPSIS based selection of aluminium alloy for automobile panels. Journal of Mechanical and Energy Engineering, ISSN (Print): 2544-0780 ISSN (Online): 2544-167, DOI: 10.30464/jmee.2019.3.1.43, Vol. 3(43), No. 1, May 2019, pp. 43-50.

8. G. Uma Maheswara Rao, Dr. Ch. Srinivasa Rao Effect of Pulsed Current Micro Plasma Arc welding parameters on Mechanical properties AISI 304 and AISI 430 dissimilar weld joint, International Journal of Manufacturing and Materials Processing, Vol. 5: Issue 1, pp. 1-26.

9. Murthy, P. B. G. S. N., Srinivasa Rao, C., & Venkata Rao, K. (2019). Experimental and 3D-ANN based Analysis and Prediction of Cutting Forces, Tool Vibration and Tool Wear in Boring of Ti-6Al-4V Alloy. International Journal of Automotive and Mechanical Engineering, © Universiti Malaysia Pahang, Malaysia https://doi.org/10.15282/ijame.16.1.2019.5.0467, March 2019, ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online), Volume 16, Issue 1 pp. 6146-6160

10. G. Uma Maheswara Rao, & Dr. Ch.Srinivasa Rao, Optimizing Fusion Zone Grain Size, Hardness and Tensile Strength of Pulsed Current Micro Plasma Arc Welded AISI 304 and

2

AISI 430 dissimilar Alloy using Grey Relational Analysis. Journal of Mechanical and Mechanics Engineering, http://doi.org/10.5281/zenodo.2599117, e-ISSN: 2581-3722, (2019), Volume 5 Issue 1, pp. 38–50.

11. S. Vijay and Ch. Srinivasa Rao, Geometry-Based Dynamic Behavior of Functionally Graded Material Under Fluctuating Loads, MECHANICAL ENGINEERING FOR SUSTAINABLE DEVELOPMENT State-of-the-Art Research Published by Apple Academic Press Inc. 3333, Mistwell Crescent Oakville, ON L6L 0A2, Canada, ISBN-13: 978-1-77188-681-9 (Hardcover), ISBN-13: 978-1-351-17016-1 (eBook) 2018, Chapter 23,pp.259-269.

12. N. Praveena Devi, Ch.Srinivasa Rao, K. Kiran Kumar, Numerical and Experimental Studies of Nanofluid as a Coolant Flowing Through a Circular Tube: select proceedings of the International Conference on Numerical Heat Transfer and Fluid Flow (NHTFF 2018), January 2019, DOI: 10.1007/978-981-13-1903-7_59, ISBN 978-981-13-1903-7, In book: Numerical Heat Transfer and Fluid Flow, pp 511-521.

Year -2018 13. PBGSN Murthy, Ch Srinivasa Rao An Experimental Investigation of Shear Force and

Ploughing Force in Boring of Ti-6 Al-4V, International Journal of Lean Thinking, ISSN: 2146-0337, Volume 9, Issue 2 (December2018), pp. 77-90.

14. Mantrala Kedar Mallik, Ch. Srinivasa Rao, V. V. S. Kesava Rao And Abdul Munaf SK, Effect of process parameters on the tensile properties of LENS deposited Co-Cr-Mo alloy, International Journal of Manufacturing Technology and Management, ISSN online 1741-5195, ISSN print 1368-2148, DOI: 10.1504/IJMTM.2018.095039, 2018 Vol.32 No.6, pp.509 – 516.(SCOPUS)

15. Perunalla PBGSN Murthy, Ch Srinivasa Rao, K Venkata Rao Tool and Workpiece Vibrations Measurement - A Review, Independent Journal Of Management & Production (Ijm&P), http://www.ijmp.jor.br, DOI: 10.14807/ijmp.v9i4.801, ISSN: 2236-269X, Volume 9, issue 4, October - December 2018, pp.1254-1276.

16. Bhaskar Kumar Madeti, Chalamalasetti Srinivasa Rao and Suma Priya Gugulothu, Buckling and Failure Analysis of Bones in Hip Joint, Journal of Mechanics in Medicine and Biology, ISSN (print): 0219-5194, ISSN (online): 1793-6810, https://doi.org/10.1142/S0219519418500525, Volume 18, Issue 05 (August 2018), pp. 1850052-1-14.(SCOPUS)

17. P. B. G. S. N. Murthy and Ch.Srinivasa Rao , An optimization strategy based approach to improve machining performance for boring of Ti-6Al-4V alloy, Journal of Machining and Forming Technologies, © 2018 Nova Science Publishers, Inc. ISSN: 1947-4369, Volume 9, Number 1-2, pp.1-15.(SCOPUS)

18. Bhaskar Kumar Madeti, Srinivasa Rao Chalamalasetti, S. K. Sundara siva rao Bolla Pragada Force evaluation and stress distribution at possible weight and structure of femur bone in pelvis frame while standing, International Journal of Medical Engineering and Informatics, Inderscience, DOI: 10.1504/IJMEI.2018.10013913, ISSN online: 1755-0661, ISSN print: 1755-0653, Vol. 10, No. 3, 2018, pp.235-251.

19. Bhaskar Kumar Madeti, Srinivasa Rao Chalamalasetti, Finite element analysis for knee implants with suitable material combinations, International Journal of Experimental and Computational Biomechanics, Inderscience journals, DOI: 10.1504/IJECB.2018.10013562 ISSN online: 1755-8743, ISSN print: 1755-8735 Vol. 4, Nos. 2/3, 2018, pp.113–124.

20. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao, Optimization of machining parameters during Drilling by Taguchi based Design of Experiments and Validation by Neural Network Brazilian Journal of Operations & Production Management, Publisher-s: [Rio de Janeiro] : Brazilian Association for Industrial Engineering and Operation Management ISSN: 2237-8960, ISSN-L:1679-8171, DOI: 10.14488/BJOPM.2018.v15.n2.a11, Vol. 15, No. 2, pp. 249-301.(SCI)

21. Praveena Devi N. Ch. Srinivasa Rao, Kiran Kumar K Suitability of magnetic nanofluid in heat transfer loops, International Journal of Heat and Technology (IJHT), ISSN: 0392-8764,

3

https://doi.org/10.18280/ijht.360126 Vol. 36, Issue. 26, March, 2018, pp. 195-200.( Web of Science, Emerging Sources Citation Index (ESCI), Scopus)

22. A. Anitha Lakshmi, Ch. Srinivasa Rao, M. Srikanth, K. Faisal, K. Fayaz, Dr. Puspalatha, Swadesh Kumar Singh. Prediction of mechanical properties of ASS 304 in superplastic region using artificial neural networks, ISSN: 2214-7853, Materials Today: Proceedings, Volume 5, Issue 2, Part 1, (2018), pp. 3704–3712. (SCOPUS)

23. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao, Modelling, Simulation and Experimental validation of Burr size in Drilling of Aluminium 6061 alloy, Procedia Manufacturing, ISSN: 2351-9789, vol. 20 (2018) pp. 458–463.

24. P.V. Vinay, Ch. Srinivasa Rao, and K. Pavan Kumar, "An Analysis of Cutting Force and Surface Finish in Surface Grinding of AISI H13 Steel", Journal of Mechanical Engineering Research and Developments(JMERD), ISSN: 1024-1752, DOI: 10.7508/jmerd.2018.01.021, 2018, vol. 41, no. 1, pp. 177-189, (SCOPUS)

Year -201725. Siva Prasad Kondapalli, Srinivasa Rao Chalamalasetti Effect of Pulse Current Micro Plasma

Arc Welding Parameters on Pitting Corrosion Rate of AISI 321 Sheets in 3.5 N NaCl Medium Journal of Mechanical Engineering and Technology (JMET), PRINT ISSN No.: 2180-1053, E ISSN No.: 2289-8123, Volume 9 Issue 2 40, No. 2, 2017, pp. 349-356.

26. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao, Effect of Drilling Parameters on Thrust Force and Torque during Drilling of Aluminium 6061 Alloy-Based on Taguchi Design of Experiments, Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh, ISSN: 0379-4318, Vol. ME 46, December 2016, pp.41-48. (SCOPUS)

27. D. Swapna, Ch. Srinivasa Rao, S. Radhika, Review on Deep Drawing Process, International Journal of Emerging Research in Management &Technology, ISSN: 2278-9359, June 2017, Volume-6, Issue-6, pp.146-149.

28. Rehman, Shaik Mujeebur, and Chalamalasetti Srinivasa Rao. Vibration buckling and fracture

analysis of a cracked cylindrical shell. International Journal of Design Engineering, Print ISSN: 1751-5874, Online ISSN: 1751-5882, https://doi.org/10.1504/IJDE.2017.085641 volume 7, no. 1 (2017): pp. 33-53.

29. S. Radhika, Ch. Srinivasa Rao , D. Swapna, B. Purna Chandra Sekhar Teaching Learning Based Optimization Approach for the Development of an Effective Master Production Schedule, International Journal of Advanced Research in Computer Science and Software Engineering, Volume 7, Issue 5, May 2017, ISSN(Print): 2277-6451, pp.351-358.

30. A. Anitha Lakshmi, Ch. Srinivasa Rao, J. Gangadhar, Ch. Srinivasu, Swadesh Kumar Singh,-Review of Processing Maps and Development of Qualitative Processing Maps, https://doi.org/10.1016/j.matpr.2017.01.106, ISSN: 2214-7853, MaterialsToday: Proceedings, volume 4, Issue 2, Part A, 2017, pp. 946–956.(SCOPUS)

Year – 2016, 31. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao, Prediction of Burr Size in Drilling

Operation of Al 2014 Alloy using Taguchi Design Method, International Journal of Lean Thinking (IJLT)Turkey, ISSN: 2146-0337, Volume 7, Issue 2 (December 2016)pp.47-56.

32. A. Anitha Lakshmi, Ch. Srinivasa Rao, J. Gangadhar, Swadesh Kumar Singh A preliminary study on forming limit diagram and strain distribution of ASS 304, Journal of Advances in Technology and Engineering Research, ISSN: 2414-4592, DOI: 10.20474/jater-2.2.42016, 2(2): pp. 52-58.

33. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao, Effect of drilling parameters on Thrust force and Torque during Drilling of Aluminium 6061 Alloy - Based on Taguchi Design of Experiments, Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh, ISSN: 0379-4318, Vol. ME 46, December

4

2016, pp.41-48.

34. Mantrala Kedar Mallik, Ch. Srinivasa Rao, V. V. S. Kesava Rao And Abdul Munaf SK, Effect of Heat Treatment on Corrosion Behavior of Weld Deposited Co-Cr-Mo Alloy, ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network (ARPN). ISSN: 1819-6608, VOL. 11, NO. 20, OCTOBER 2016, pp.12188-12191.

35. Abdul Munaf Shaik, V V S. Kesava Rao, Ch. Srinivasa Rao and M. Kedar Mallik, Application of Modularity in a Piston Pump Assembly Line of a Hydraulic System, ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network (ARPN). ISSN: 1819-6608, VOL. 11, NO. 20, OCTOBER 2016,pp.12202-12205.

36. Varaprasad Bhemuni, Srinivasa Rao Chalamalasetti, Investigation of Forces, Power and Surface Roughness in Hard Turning with Mixed Ceramic Tool, Journal of Advanced Manufacturing Technology, Malaysia,  ISSN: 1985-3157, e-ISSN: 2289-8107, Vol. 10, No. 1, 2016.(SCI, SCOPUS)

37. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao Optimization of Surface Roughness, Circularity Deviation and Selection of Different Alluminium Alloys during Drilling for Automotive and Aerospace Industry, Independent Journal of Management & Production (Ijm&P) ISSN: 2236-269X, DOI: 10.14807/ijmp.v7i2.414, http://www.ijmp.jor.br vol. 7, no. 2, April - June 2016, pp.413-430.

38. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Optimization of fusion zone grain size, hardness, and ultimate tensile strength of pulsed current micro plasma arc welded Inconel 625 sheets using genetic algorithm, The International Journal of Advanced Manufacturing Technology, ISSN: 0268-3768, DOI 10.1007/s00170-015-7373-y, (2016) Vol. 85 pp.2287–2295.(SCI, SCOPUS)

39. Reddy Sreenivasulu, Chalamalasetti Srinivasa Rao Overview on Burr Formation, Simulation and Experimental Investigation of Burr size — based on Taguchi Design of Experiments during Drilling of Alluminium 7075 Alloy, AKGEC INTERNATIONAL JOURNAL OF TECHNOLOGY, January-June 2016, Vol. 7, No. 1, ISSN: 0975-9514, 2016 pp.24-30.

40. Varaprasad.Bh, Srinivasa Rao.Ch, Analysis of Hard Turning Process of AISI D3-Thermal Aspects, Online Anveshana’s International Journal of Research In Engineering And Applied Sciences, Website: www.anveshanaindia.com , Volume 1, Issue 6 (2016, JUNE) ISSN: 2455-6300, pp.90-98.

41. Sreerama Chakravarthy Damera, Prof. Ch. Srinivasa Rao and Prof. A. Balakrishna 2-D Finite Element Modeling of GMA Welding Process, International Journal of Advanced Research (2016), ISSN: 2320-5407, DOI: 10.21474/IJAR01, Volume 4, Issue 6, pp.1484-1494.

Year – 201542. Abdul Munaf Shaik, V V S. Kesava Rao, Ch. Srinivasa Rao Application and Analysis of

Modularity in Assembly Unit of Drying and Distribution Unit of Braking System of an Automobile Universal Journal of Engineering Science 2015, http://www.hrpub.org, , ISSN: 2331-6624 (Print), ISSN: 2331-6632 (Online) DOI: 10.13189/ujes.2015.030101, Volume 3(1): pp. 1-5.

43. Varaprasad Bhemuni Srinivasa Rao Chalamalasetti, Pavan Kumar Konchada,Venkata Vinay Pragada Analysis of hard turning process: thermal aspects, Advances in Manufacturing, ISSN: 2095-3127,Volume 3, Number 4, DOI 10.1007/s40436-015-0124-3, Shanghai University and Springer-Verlag Berlin Heidelberg 2015,pp. 323-330. (SCIE and SCOPUS)

44. P V Vinay and Ch Srinivasa Rao, Temperature assessment in surface grinding of tool steels Journal of Mechanical Science and Technology, DOI 10.1007/s12206-015-1040-y, ISSN: 1738-494X(Print), 1976-3824(Online), vol.29 (11) (2015) pp. 4923-4932. (SCIE and SCOPUS)

45. D Swapna, Ch. Srinivasa Rao, S Radhika, Few Aspects in Deep Drawing Process, Journal of Materials & Metallurgical Engineering JoMME (2015) © STM Journals 2015 ISSN: 2231-3818(online), ISSN: 2321-4236(print) Volume 5, Issue 3, pp. 31-35.

5

46. Bhaskar Kumar Madeti, Srinivasa Rao Chalamalasetti, S. K. Sundara siva rao Bolla Pragada, Biomechanics of knee joint — A review, DOI10.1007/s11465-014-0306-x Print ISSN:2095-0233, Online ISSN:2095-0241, Frontiers of Mechanical Engineering-springer link, June 2015, Volume 10, Issue 2, pp 176-186. (SCOPUS)

47. Mallik Kedar Mantrala, Ch. Srinivasa Rao, V.V.S. Kesava Rao. Application Oriented Approach of Layered Manufacturing in Biomedical and Engineering Fields – A Review. Journal of Materials & Metallurgical Engineering. www.stmjournals.com ISSN: 2231-3818(online), ISSN: 2321-4236(print) Volume 5, Issue 2, pp. 39–51.

48. Bhaskar Kumar Madeti, Chalamalasetti Srinivasa Rao, Bollapragada S.K. Sundara Siva Rao, Free body diagram and static finite element analysis of the human tibia, International Journal of Biomedical Engineering and Technology (IJBET), Inderscience, ISSN online: 1752-6426 ISSN print: 1752-6418, Vol. 18, No. 3, 2015, pp. 290 - 299. (SCOPUS)

49. Mantrala Kedar Mallik, Chalamalasetty Srinivasa Rao, Vaddi Venkata Sundara Kesava Rao, Effect of heat treatment on hardness and wear behavior of weld deposited Co-Cr-Mo alloy, 2015, ISSN: 1517-7076, artigo 11622, revista Matéria, Rio de Janeiro, RJ, Brazil vol. 20, issue no. 2, pp. 544 – 549. (SCIE and SCOPUS)

50. Mantrala Kedar Mallik, Ch. Srinivasa Rao and V.V.S. Kesava Rao, Microstructure and Tribological Properties of Weld Deposited Co-Cr-Mo Alloy, Journal for Manufacturing Science and Production. Volume 15, Issue 2, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2014-0030, January 2015, pp. 239–241.

51. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Application of grey relational analysis for optimizing weld bead geometry parameters of pulsed current micro plasma arc welded Inconel 625 sheets, The International Journal of Advanced Manufacturing Technology, ISSN: 0268-3768,DOI 10.1007/s00170-014-6665-y,Combined issue. 1-4, (2015), Volume 78, pp.625-632. (SCIE and SCOPUS)

52. Mantrala KM, Das M, Balla VK, Rao CS and Kesava Rao VVS. (2015) Additive manufacturing of Co-Cr-Mo alloy: influence of heat treatment on microstructure, tribological, and electrochemical properties. doi: 10.3389/fmech.2015.00002, Frontiers in Mechanical Engineering, Computer-Aided and Digital Manufacturing Technologies, www.frontiersin.org March 2015 | Volume 1 | Article 2. (SCOPUS)

53. P V Vinay and Ch Srinivasa Rao, Experimental Analysis and Modelling of Grinding AISI D3 Steel International Journal of Recent Advances in Mechanical Engineering (Ijmech), Wireilla Scientific Publications, New South Wales, Australia DOI : 10.14810/ijmech.2015.4105, ISSN: 2200-5854, Vol.4, No.1, February 2015,pp.47-60.

54. Varaprasad Bh, Srinivasa Rao.Ch, Comparison of Surface Roughness of Cold work and Hot Work Tool Steels in Hard Turning, International Journal of Recent Advances in Mechanical Engineering (Ijmech), Wireilla Scientific Publications, New South Wales, Australia DOI : 10.14810/ijmech.2015.4109, ISSN: 2200-5854, Vol.4, No.1, February 2015,pp.107-116.

55. Abdul Munaf Shaik,V. V. S. Kesava Rao, Ch. Srinivasa Rao, Development of modular manufacturing systems—a review, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-014-6289-2, ISSN: 0268-3768 (Print), 1433-3015 (Online), February 2015, Volume 76, Issue 5-8, pp 789-802. (SCIE and SCOPUS)

56. Lanka Rasidhar, A. Rama Krishna, Ch. Srinivasa Rao, K. Vijaya Lakshmi, Development and Evaluation of Mechanical Properties of Al/Ilmenite Nanocomposite Applied Mechanics and Materials, Main Theme:Mechanics and Control Engineering III, ISSN: 1662-7482, Volume 704, doi: 10.4028/www.scientific.net/AMM.704, pp.32-38.

57. Mir Sadat Ali, Ch.Srinivasa Rao and Nageswara Rao, Modeling and Optimization Approaches used in Welding - A Review, Elixir Mech. Engg. ISSN: 2229-712X, Vol. 81 (2015), pp. 31702-31708.

Year – 2014

6

58. Varaprasad Bhemuni, Chalamalasetti Srinivasa Rao Statistical Model for Surface Roughness in Hard Turning of AISI D3 Steel, Jordan Journal of Mechanical and Industrial Engineering, Volume 8 Number 6, December 2014,ISSN: 1995-6665, pp. 393– 401. (SCOPUS)

59. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Study on Weld Quality Characteristics of Micro Plasma Arc Welded Austenitic Stainless Steels, Procedia Engineering, ELSEVIER, ISSN: 1877-7058, DOI: 10.1016/j.proeng.2014.12.3057, ( 2014), volume 97, pp. 752 – 757.

60. Varaprasad.Bh, Srinivasa Rao.Ch, P.V. Vinay, Effect of Machining Parameters on Tool Wear in Hard Turning of AISI D3 Steel, Procedia Engineering, ELSEVIER, ISSN: 1877-7058,Volume 97, 2014, DOI: 10.1016/j.proeng.2014.12.3057,pp. 338-345.

61. Mantrala Kedar Mallik, Ch. Srinivasa Rao and Dr. V.V.S. Kesava Rao, Effect of Heat Treatment on Hardness of Co-Cr-Mo Alloy Deposited With Laser Engineered Net Shaping, Procedia Engineering, ELSEVIER, ISSN: 1877-7058, doi: 10.1016/j.proeng.2014.12.323, Volume 97, 2014, pp.1718–1723.

62. Ali Mir Sadat, Ch. Srinivasa Rao, An Experimental Investigation into Different Distortion Control Techniques in Welded T-Joints, Applied Mechanics and Materials, Main Theme: Advances in Mechanical, Materials and Manufacturing Engineering, ISSN: 1662-7482, DOI 10.4028/www.scientific.net/AMM.660.114, October 2014, Volume 660, pp. 114-119.

63. Bhaskar Kumar Madeti, Chalamalasetti Srinivasa Rao and B.S.K. Sundara Siva Rao Failure analysis of ACL and Hertz contact stress in human knee Int. J. Biomedical Engineering and Technology ,IJBET, Inderscience, ISSN online: 1752-6426 ISSN print: 1752-6418, Vol. 16, No. 4, 2014, pp.317-328. (SCIE and SCOPUS)

64. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao Study on Effect of Die Corner Radius in Deep Drawing Process, Pyrex Journal of Engineering and Manufacturing Technology. Vol 1(1) pp 011-016 November, 2014.

65. P.V. Vinay, Ch. Srinivasa Rao, I.H. Nagaraja Rao Novel Force Modelling Technique for Grinding, Journal for Manufacturing Science and Production. ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2014-0009, October 2014.Volume 14, Issue 3, pp. 177–182,

66. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Optimizing Pulsed Current Micro Plasma Arc Welding Parameters to Maximize Ultimate Tensile Strength of AISI 304L Sheets Using Response Surface Method, Applied Mechanics and Materials, Trans Tech Publications, Switzerland, ISSN: 1662-7482, Vol. 660 (2014) pp 322-326.

67. Kedar M. Mantrala, Mitun Das, Vamsi K. Balla, Ch. Srinivasa Rao and V.V.S. Kesava Rao, Laser-deposited CoCrMo alloy: Microstructure, wear, and electrochemical properties, Journal of Materials Research, Copyright © Materials Research Society 2014, (Focus Issue: The Materials Science of Additive Manufacturing) Published online: 22 July 2014, ISSN: 0884-2914   EISSN: 2044-5326, DOI: http://dx.doi.org/10.1557/jmr.2014.163, Volume   29 , Issue   17 , 2014, pp. 2021- 2027. (SCIE and SCOPUS)

68. Bhemuni, V., Chalamalasetti, S.R. and Kondapalli, S.P. (2014) Effect of Machining Parameters on Tool Wear and Nodal Temperature in Hard Turning of AISI D3 Steel. ISSN: 2333-972, Open Access Library Journal, 1: e627. OALibJ | DOI:10.4236/oalib.1100627.

69. Bhaskar Kumar Madeti, Chalamalasetti Srinivasa Rao and B.S.K. Sundara Siva Rao “Biomechanics of hip joint: a review,” Int. J. Biomedical Engineering and Technology ,IJBET, Inderscience, ISSN online: 1752-6426 ISSN print: 1752-6418, Vol. 15, No. 4, 2014, pp.341-359. (SCIE and SCOPUS)

70. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, ”Optimizing Die Corner Radius of Deep Drawing Die”, Trends in Mechanical Engineering & Technology, TMET (2014) ISSN: 2231-1793 (online), ISSN: 2347-9965 (print) Volume 4, Issue 2, pp. 22-32.

7

71. Ali, M. S., C. S. Rao, and D. N. Rao. "Study the effect of shielded metal arc welding process parameters, cryo-treatment and preheating on welding characteristics and modelling by an artificial neural network."Australian Journal of Mechanical Engineering; ISSN: 1448-4846, May 2014, Vol. 12 Issue 2, pp.195. (SCIE and SCOPUS)

72. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Multi-objective Optimization of Weld Bead Geometry Parameters of Pulsed Current Micro Plasma Arc Welded AISI 304L Stainless Steel Sheets Using Enhanced Non-dominated Sorting Genetic Algorithm, Journal for Manufacturing Science and Production. Volume 14, Issue 2, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2014-0002, August 2014, pp.79-86.

73. M Kaladhar, K Venkata Subbaiah and Ch Srinivasa Rao, Simultaneous optimization of multiple responses in turning operations, Proc IMechE Part B:J Engineering Manufacture, ISSN: 0954-4054, sagepub.co.uk, DOI:10.1177/0954405413510915, 2014, Vol. 228(7) pp. 707–714. (SCIE and SCOPUS)

74. Ponugupati Narendra Mohan, Ch. Srinivasa Rao Dynamic Cellular Manufacturing System: A Review, Journal of Production Research & Management, JoPRM, ISSN: 2249 – 4766, STM Journals, Vol 4, No 2 (2014), pp.1-11.

75. Ponugupati Narendra Mohan, Ch. Srinivasa Rao Dynamic Cellular Manufacturing System Design for Automated Factories, Journal of Production Research & Management,  STM Journals, JoPRM, ISSN: 2249 – 4766, Vol 4, No 2 (2014), pp.12-29.

76. S. Radhika, Ch. Srinivasa Rao, M. Vijaya, K. Lakshmi, Evolutionary Optimization in MPS: A Brief Review, Journal of Production Research and Management, STM Journals Volume 4, Issue 1, ISSN: 2249 – 4766, JoPRM (2014) pp.13-21.

77. P. Gowthamraju, Ch. Srinivasa Rao FEA Analysis for the Optimization of an Extrusion Die, Trends in Mechanical Engineering & Technology, TMET, ISSN: 2231-1793, Volume 4, Issue 1 (2014) © STM Journals, pp. 10-21.

78. Mantrala K Mallik, Srinivasa Rao Ch., Kesava Rao V.V.S, Characterization of Materials used In Laser Engineered Net Shaping Through Microstructure Analysis: A Review , Trends in Machine design, TMD (2014) eISSN: 2455-3352, © STM Journals, Volume 1, Issue 1, pp. 5-8.

79. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, A Review on Welding of AISI 304L Austenitic Stainless Steel, Journal for Manufacturing Science and Production, Volume 14, Issue 1 (Apr 2014), ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2012-0007, pp. 1–11.

80. Radhika Sajja, Srinivasa Rao Chalamalasetti, A selective survey on multi-objective meta-heuristic methods for optimization of master production scheduling using evolutionary approaches, Review Article, International Journal of Advances in Applied Mathematics and Mechanics (IJAAMM), ISSN: 2347-2529, Volume 1, Issue 3 (2014), pp.109 -120.

81. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Critical Review of Fatigue Properties of Friction Stir Welds of Aluminum Alloys, Journal of Materials and Metallurgical Engineering, JoMME (2014) ISSN: 2231-3818, Volume 4, Issue 1, pp. 1-6.

82. Radhika Sajja, Ch.Srinivasa Rao, A New Multi-Objective Optimization of Master Production

Scheduling Problems Using Differential Evolution, International Journal of Applied Science and Engineering, Printed version ISSN: 1727-2394; Online version ISSN: 1727-7841, Vol.12, No.1 - March 2014, pp.75-86.

83. Siva Prasad Kondapalli, Srinivasa Rao Chalamalasetti, Nageswara Rao Damera, Optimization of Fusion Zone Grain Size, Hardness, and Ultimate Tensile Strength of Pulsed Current Micro plasma Arc Welded AISI 304L Sheets Using Genetic Algorithm, Hindawi Publishing Corporation http://dx.doi.org/10.1155/2014/943643, ISSN: 2356-7023, International Journal of Manufacturing Engineering, Volume 2014, Article ID 943643, pp.1-7. (SCIE and SCOPUS)

8

84. Ambati Vijay Kumar, Chalamalasetti Srinivasa Rao and Damera Nageswara Rao, The Influence of Extrusion ratio on the Properties of Nano SiC reinforced 6061 Aluminum Alloy in cold extrusion International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Vol. 3 Issue 1, January – 2014, pp. 80-86.

85. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Effect of Welding Current Mode on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets, Periodical: Applied Mechanics and Materials, "Scientific.Net" Trans Tech Publications, 4th Mechanical and Manufacturing Engineering, Switzerland ISSN: 1662-7482, doi:10.4028/www.scientific.net/AMM., Vols. 465-466 (2014) pp 1209-1213.

Year – 201386. P. V. Vinay, C. S. Rao, Grinding Mechanics and Advances -A Review, Journal of Mechanical

Engineering and Technology, Malaysia, ISSN: 2180-1053, Vol. 5, issue No. 2, July - December 2013, pp. 41-74.

87. Ambati Vijay Kumar, Chalamalasetti Srinivasa Rao and Damera Nageswara Rao Investigation into the Effect of Die Angle in Extrusion on Properties of Nano-Sic Reinforced 6061 Aluminum Alloy, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Vol. 2 Issue 12, December – 2013, pp. 1889-1894.

88. Bh. Varaprasad, Ch. Srinivasa Rao Design of Experiments to Hard Turning: A Review, Journal of Production Research and Management, JoPRM (2013) © STM Journals 2013. ISSN: 2249–4766, volume 3 issue 3, pp.1-12.

89. V.P. Bhemuni and S.R. Chalamalasetti, A Review on Hard Turning by using Design of Experiments Journal of Manufacturing Science and production, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2013-0007, September 2013 Volume 13, Issue 3, pp. 209–219.

90. S. Radhika, Ch. Srinivasa Rao and K. Karteeka Pavan A Differential Evolution based Optimization for Master Production Scheduling Problems, International Journal of Hybrid Information Technology, ISSN:1738-9968, IJHIT http://dx.doi.org/10.14257/ijhit.2013.6.5.15, Vol.6, No.5 (2013), pp.163-170. (SCOPUS)

91. Mir Sadat Ali, Dr. Ch. Srinivasa Rao and Dr. D. Nageswar Rao, An Experimental Investigation into Different Distortion Control Techniques in Welded T- Joints, International Journal of Manufacturing Science and Technology, ISSN: 0973-5496, Vol.7 No.2 December 2013, pp.69 -73

92. L. Rasidhar, A.Ramakrishna, Ch.Srinivasa Rao, Fabrication and Investigation on Properties of Ilmenite (FeTiO3) based Al-Nano Composite by Stir Casting Process, International Journal of Bio-Science and Bio-Technology,(SERSC), ISSN: 2233-7849, Vol. 5, No. 4, August, 2013, pp.193-199.

93. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Effect of welding parameters on pitting corrosion rate of pulsed current micro plasma arc welded AISI 304L sheets in 1N HCl Journal of Computational and Applied Research in Mechanical Engineering (JCARME), ISSN: 2228-7922, Volume 3, Number 1 (Autumn-2013), pp.1-11. (SCOPUS)

94. S. Radhika, Ch. Srinivasa Rao, K. Karteeka Pavan, A Study and Performance Evaluation of Evolutionary Optimization Techniques for Multi-objective Master Production Scheduling Problems, Journal of Production Research and Management, STM Journals Volume 3, Issue 2, ISSN: 2249 – 4766, JoPRM (2013) pp.12-22.

95. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, An Investigation on Effect of Welding Current Mode on Weld Quality Characteristics of Micro-plasma Arc Welding of Inconel 625 Sheets, Journal of Materials and Metallurgical Engineering Volume 3, Issue 2, ISSN: 2231 -3818, © STM Journals 2013, JoMME (2013), pp. 8-13.

9

96. P.V. Vinay, Ch. Srinivasa Rao, Influence of Process Parameters on Grinding - A Review Trends in Mechanical Engineering & Technology,(TMET), © STM Journals-2013, ISSN: 2231-1793, Volume 3, Issue 2, pp.16-28.

97. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Optimization Of Pulsed Current Parameters To Minimize Pitting Corrosion in Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets Using Genetic Algorithm, International Journal of Lean Thinking(IJLT)Turkey, ISSN: 2146-0337,Volume 4, Issue 1, June 2013 pp.9-19.

98. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Study of Weld Quality Characteristics of Inconel 625 Sheets at Different Modes of Current in Micro Plasma Arc Welding Process, Research and Reviews: Journal of Material Sciences, e-ISSN: 2321-6212, p-ISSN: 2347-2278, Vol 1, No 1 April – June, 2013, pp. 20-27.

99. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Application of Grey Relational Analysis for Optimizing Weld Bead Geometry Parameters of Pulsed Current Micro Plasma Arc Welded AISI 304L Stainless Steel Sheets Int J Advanced Design and Manufacturing Technology, ISSN: 2252-0406 Vol. 6/ No. 1/ March – 2013, pp. 79-86.

100. L. Rasidhar, A.Ramakrishna, Ch.Srinivasa Rao, Experimental Investigation on Mechanical Properties of Ilmenite based Al Nanocomposites, International Journal of Engineering Science and Technology (IJEST) ISSN: 0975-5462, Vol. 5,No.05, May 2013, pp. 1025-1030.

101. Reddy Srinivasulu, Ch.Srinivasa Rao, Modeling and Optimization of Thrust force and Torque during Drilling of Aluminum 6061 Alloy Using Taguchi–Grey Analysis Approach, International journal of Advanced Materials Manufacturing & Characterization (IJAMMC) ISSN: 2277-3886, http://dx.doi.org/10.11127/ijammc.2013.02.077 Vol 3 Issue 1 (2013), pp. 413-418.

102. Reddy Srinivasulu, Ch.Srinivasa Rao, Experimental Investigation on Influence of Nano Fluids in Drilling of Al 6061 Alloy using Grey Based-Taguchi Approach International journal of Advanced Materials Manufacturing & Characterization (IJAMMC) ISSN: 2277-3886, Vol 3 Issue 1 (2013), http://dx.doi.org/10.11127/ijammc.2013.02.076, pp. 407-412.

103. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Effect of Welding Parameters on Pitting Corrosion Rate in 3.5N NaCl of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets, Journal of Manufacturing Science and production, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2012-0031, April 2013, Volume 13, Issue 1-2, pp. 15–23. (SCIE)

104. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Multi Objective Optimization of Weld Bead Geometry Parameters of Pulsed Current Micro Plasma Arc Welded Inconel 625 Using Enhanced Non-dominated Sorting Genetic Algorithm, Journal of Materials and Metallurgical Engineering Volume 3, Issue 1, ISSN: 2231 – 3818, JoMME (2013), pp. 17-24.

105. Reddy Srinivasulu, Ch.Srinivasa Rao, Application of Grey Based - Taguchi Method to Determine Multiple Performance Characteristics in Drilling of Aluminium Alloys–Review, Research Journal of Engineering Sciences, ISSN: 2278 – 9472, , March (2013), Vol. 2(3), pp. 45-51.

106. S. P. Kondapalli, S. R. Chalamalasetti and N. R. Damera, Application of Taguchi based Design of Experiments to Fusion Arc Weld Processes: A Review, International Journal of Technology and Management, Science Target, Canada, ISSN: 1927‐9000, (2013) Vol. 2 No. 1, pp.1-8.

107. M. Kaladhar, K. Venkata Subbaiah, C.H. Srinivasa Rao, Optimization of surface roughness

and tool flank wear in turning of AISI 304 austenitic stainless steel with CVD coated tool, Journal of Engineering Science and Technology (JESTEC), ISSN: 1823-4690, Volume 8, Issue 2, April 2013, pp. 165–176. (SCOPUS)

108. Reddy Srinivasulu, Ch.Srinivasa Rao, Design of Experiments based Grey Relational Analysis in Various Machining Processes - A Review Research Journal of Engineering Sciences,

10

January (2013) ISSN: 2278 – 9472,Vol. 2(1),pp. 21-26,

Year – 2012109. M. Sadat Ali, S. Rao, N. Rao Modelling the effects of preheating on angular distortions in one

sided fillet welds, journal of Achievement in Materials and Manufacturing Engineering, ISSN: 1734-8412,Website:http://www.journalamme.org/ VOLUME 55, ISSUE 2, December 2012, pp. 578-583.

110. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Study of Pulsed Micro Plasma Arc welding parameters on Weld Bead Geometry of AISI 304L Sheets using Factorial Method Thammasat International Journal of Science and Technology, is a publication of Thammasat University, Thailand. Print ISSN: 0859-4074, Vol. 17, No. 1, January-March 2012, pp.31-41.

111. Chalamalasetti Srinivasa Rao, Kondapalli Siva Prasad, Damera Nageswara Rao, Comparison of weld quality Characteristics of SS304L and INCONEL625 In micro plasma arc welding process, Journal of Manufacturing Technology Research, © 2012 Nova Science Publishers, Inc ISSN: 1943-8095, Volume 4, Number 3/4, pp.133-143. (SCOPUS)

112. K. Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Phani Kumar S. Effect of welding speed on weld quality characteristics of pulsed current micro plasma arc welded AISI 304L Sheets Asian International Journal of Science and Technology in Production and Manufacturing Engineering, AIJSTPME (2012), ISSN:1906-151X, Volume 5, Number 4, (2012), PP 21-28.

113. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Optimization of Fusion Zone Grain Size, Hardness and Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets Using Genetic Algorithm, Journal of Manufacturing Science and production, Volume 12, Issue 3-4, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2012-0011, December 2012, pp. 181–189. (SCIE)

114. Reddy Srinivasulu, Ch.Srinivasa Rao, Application of Gray Relational Analysis for Surface Roughness and Roundness Error in Drilling of Al 6061 Alloy International Journal of Lean Thinking ISSN: 2146- 0337,Volume 3,' Issue 2 , {December 2012) pp. 67-78.

115. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, An investigation on weld quality characteristics of pulsed current micro plasma arc welded austenitic stainless steels International Journal of Engineering, Science and Technology (MultiCraft Limited), ISSN: 2141-2839,Vol. 4, No. 2, 2012, pp. 159-168.

116. Reddy Srinivasulu, Ch.Srinivasa Rao, Determination of Optimal Combination of Drilling Parameters to Minimize Burr Height and Thickness for Aluminum 6061 Alloy Using Grey Relational Analysis International Journal of Advances in Science and Technology, ISSN: 2229- 5216, Vol. 5, No.4, October 2012,pp. 9-16.

117. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Optimizating Pitting Corrosion in 3.5 N NaCl Medium of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets Using Genetic Algorithm Journal of Materials and Metallurgical Engineering, STM Journals 2012 ISSN: 2231–3818, Volume 2, Issue 3, December 2012, pp. 39-49.

118. Ravi Sankar B, Nageswara Rao D, Srinivasa Rao Ch. Nanofluid Thermal Conductivity- A Review International Journal of Advances in Engineering & Technology, Nov. 2012. ©IJAET ISSN: 2231-1963, Vol. 5, Issue 1, pp. 13-28. Impact Factor of 0.86.

119. Chalamalasetti Srinivasa Rao, Kondapalli Siva Prasad, Damera Nageswara Rao, Study on Effect of Welding Speed on Micro Structure and Mechanical Properties of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets Journal of Minerals and Materials Characterization and Engineering, doi:10.4236/jmmce.2012.1110107 Published Online October 2012 , ISSN Print: 1539-2511 (http://www.SciRP.org/journal/jmmce) 2012, vol.11, issue 10, pp.1027-1033.

120. Bhuvanagiri Ravi Sankar, Damera Nageswara Rao, Chalamalasetti Srinivasa Rao Experimental investigation on stability of Al2O3-Water Nanofluid using response surface methodology, International Journal of Nano Science and Nanotechnology. ISSN: 0974-3081, Vol. 3, Number 3 (2012), pp. 149-160.

11

121. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Effect of process parameters of pulsed current micro plasma arc welding on weld pool geometry of Inconel 625 welds Kovové materiály - Metallic Materials, ISSN: 1338-4252 (online) ISSN: 0023-432X (print), vol. 50 (2012), no. 3, DOI: 10.4149/km 2012 3 153, pp. 153 – 159. (SCIE)

122. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, Application of Hooke & Jeeves Algorithm in Optimizing Fusion Zone Grain Size and Hardness of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets Published Online September 2012 doi:10.4236/jmmce.2012.119082(http://www.SciRP.org/journal/jmmce)Journal of Minerals and Materials Characterization and Engineering, ISSN Print: 1539-2511, 2012, 11, pp. 869-875.

123. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao, (2012) Optimizing fusion zone grain size and hardness of pulsed current micro plasma arc welded Inconel625 sheets using Hooke and Jeeves Algorithm, Multidiscipline Modeling in Materials and Structures, DOI:10.1108/15736101211269140, Emerald Group Publishing Limited, ISSN: 1573-6105, Vol. 8 Iss: 3, pp.338 – 354. (SCIE and SCOPUS)

124. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao,Study on Effect of Welding Speed on Micro Structure and Mechanical Properties of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets, Journal of Manufacturing Science and production, Volume 12, Issue 2, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp-2012-0006, August 2012. pp. 95–103. (SCIE)

125. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Study on Factors Effecting Weld Pool Geometry of Pulsed Current Micro Plasma Arc Welded AISI 304L Austenitic Stainless Steel Sheets Using Statistical Approach, Journal of Minerals and Materials Characterization and Engineering, doi:10.4236/jmmce.2012.118069, Published Online August 2012 (http://www.SciRP.org/journal/jmmce), Volume 11, No. 8, ISSN Print: 1539-2511, pp. 790-799.

126. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Advances in Plasma Arc Welding: A Review, Journal of Mechanical Engineering and Technology, ISSN: 2180-1053 Vol. 4 No. 1 January-June 2012, pp. 35-59.

127. Kaladhar, Venkata Subbaiah K, Srinivasa Rao Ch, Machining of Austenitic Stainless Steels-A review. International Journal of Machining and Machinability of materials--ISSN (Online): 1748-572X -ISSN(Print):1748-5711, DOI: 10.1504/IJMMM.2012.048564 Vol. 12, Nos. 1/2, 2012, pp. 178-192. (SCOPUS)

128. Kaladhar, Venkata Subbaiah K, Srinivasa Rao Ch., Narayana Rao K, Process parameters optimization and coatings influence on the surface quality during turning of AISI 202 austenitic stainless steel. International Journal of Machining and Machinability of Materials (IJMMM), Vol. 11, No. 4, 2012, -ISSN (Online): 1748-572X -ISSN(Print):1748-5711, pp. 371-384. (SCOPUS)

129. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Effect of pulsed current micro plasma arc welding process parameters on fusion zone grain size and ultimate tensile strength of Inconel 625 sheets Acta Metallurgica Sinica(English letters), June 2012. Available online at www:amse:org:cn ISSN: 1006-7191,CN: 21-1361/TG,Started in 1988. Vol.25, No.3, pp. 179-189. (SCIE and SCOPUS)

130. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Effect of pulsed current micro plasma arc welding process parameters on fusion zone grain size and ultimate tensile strength of AISI 304L sheets, International Journal of Lean Thinking, Turkey, ISSN : 2146-0337, June 2012, Volume 3, Issue 1, pp. 107-118.

131. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Application of Hooke & Jeeves method to optimize Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welded Inconel 625 Nickel International Journal of Lean Thinking, Turkey, ISSN : 2146-0337, June 2012, Volume 3, Issue 1, pp. 42-52.

12

132. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Review on Application of Response Surface Method based Design of Experiments to Welding Processes Journal for Manufacturing Science & Production. DOI: 10.1515/jmsp-2012-0010, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, Vol. 12, Issue 12, pp. 17–24. (SCIE)

133. Kaladhar M., Venkata Subbaiah K, Srinivasa Rao Ch., Parametric optimization during machining of AISI 304 Austenitic Stainless Steel using CVD coated DURATOMICTM cutting insert,International Journal of Industrial Engineering Computations (Summer Issue) (2012), Volume 3, Number 4 ISSN: 1923-2934 (Online)-ISSN: 1923-2926 (Print) Quarterly Publication DOI: 10.5267/j.ijiec.2012.04.002, pp. 577–586. (SCOPUS)

134. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Study on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welding of Inconel 625 Sheets Journal of Minerals & Materials Characterization & Engineering, ISSN: 1539-2511, 2012, Vol. 11, No.2 pp.133-141.

135. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Application of Design of Experiments to Plasma Arc Welding Process: A Review, J. of the Braz. Soc. of Mech. Sci. & Eng. ISSN: 1678-5878, printed version ISSN: 1806-3691 online version, January-March 2012, Vol. XXXIV, No. 1 pp. (SCIE and SCOPUS)

136. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Optimizing Fusion Zone Grain Size and Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welded Inconel 625 Alloy Sheets using Hooke & Jeeves Method International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. Volume 3 No.1 ISSN: 2228-9860 eISSN: 1906-9642. 2012, Online Available at http://TuEngr.com/V03/87-100.pdf, pp. 87-100. (SCIE)

137. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Establishing Empirical Relations to Predict Grain Size and Hardness of Pulsed Current Micro Plasma Arc Welded SS 304L Sheets American Transactions on Engineering & Applied Sciences. Volume 1 No.1, Online Available at http://TUENGR.COM/ATEAS/V01/57-74.pdf 2012, ISSN: 2229-1652 eISSN: 2229-1660, pp. 57-74.

138. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Effect of Process Parameters of Pulsed Current Micro Plasma Arc Welding on Weld Pool Geometry of AISI 304L Stainless Steel Sheets Journal of Materials & Metallurgical Engineering Volume 2, Issue 1, 2012, ISSN: 2231–3818, STM Journals 2012, pp. 37-48.

Year – 2011139. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Establishing Empirical

Relationships to Predict Grain Size and Hardness of Pulsed Current Micro plasma Arc Welded Inconel 625 Sheets, Journal of Materials & Metallurgical Engineering, Volume 1 Issue 3, December 2011, ISSN: 2231–3818, STM Journals 2011, pp. 1–9.

140. K. Siva Prasad, Ch. Srinivasa Rao and D. Nageswara Rao Y.V. Srinivasa Murthy, Optimizing Pulsed Current Micro Plasma Arc Welding Parameters to Maximize Ultimate Tensile Strength of SS304L Sheets Using Hooke and Jeeves Algorithm Journal for Manufacturing Science & Production. Volume 11, Issue 1-3, ISSN (Online): 2191-0375, ISSN (Print): 2191-4184, DOI: 10.1515/jmsp.2011.005, December 2011, pp.39–48. (SCIE)

141. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Optimizing pulsed current micro plasma arc welding parameters to maximize ultimate tensile strength of Inconel 625 Nickel alloy using response surface method International Journal of Engineering, Science and Technology, MultiCraft Limited, ISSN: 2141-2839 Vol. 3, No. 6, 2011, pp. 226-236.

142. Kaladhar M, Venkata Subbaiah K, Srinivasa Rao Ch, Determination of Optimum Process Parameters during turning of AISI 304 Austenitic Stainless Steels using Taguchi method and ANOVA International Journal of Lean Thinking(IJLT)Turkey Volume 3 Issue 1, June 2012, Available online 01 December 2011 ISSN: 2146-0337, pp.1-19.

13

143. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, A Study on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welding of SS304L Sheets International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. Volume 2 No.4, 2011 Online Available at http://TuEngr.com/V02/437-446.pdf ISSN: 2228-9860. eISSN: 1906-9642. pp. 437-446. (SCIE)

144. M. Kaladhar, Venkata Subbaiah K, Srinivasa Rao Ch, Performance evaluation of coating materials and process parameters optimization for surface quality during turning of AISI 304 austenitic stainless steel International Journal of Engineering, Science and Technology, MultiCraft Limited Vol. 3, No. 4, 2011, ISSN: 2141-2839 pp. 89-102.

145. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Prediction of Weld Bead Geometry in Plasma Arc Welding using Factorial Design Approach, Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No.10, 2011, ISSN: 1539-2511, pp.875-886.

146. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Prediction of Weld Pool Geometry in Pulsed Current Micro plasma Arc Welding of SS304L Stainless Steel Sheets, International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. Volume 2 No.3. ISSN: 2228-9860. eISSN: 1906-9642. 2011 Online Available at http://TuEngr.com/V02/325-336.pdf, pp. 325-336. (SCIE)

147. Mir Sadat Ali, Ch.Srinivasa Rao Study of Mechanical Properties in a Weld Bead of Dissimilar Metals, International Journal of Engineering Science and Technology (IJEST), ISSN : 0975-5462, Vol. 3 No. 5 May 2011, pp. 4411-4416.

148. M. Kaladhar, Venkata Subbaiah K, Srinivasa Rao Ch., Narayana Rao K, Application of Taguchi approach and Utility Concept in solving the Multi-objective Problem when turning AISI 202 Austenitic Stainless Steel, Journal of Engineering Science and Technology Review ISSN: 1791-2377, 4 (1) (2011) pp. 55-61. (SCOPUS)

Year – 2010149. Kondapalli Siva Prasad, Ch. Srinivasa Rao, D. Nageswara Rao, Prediction of Weld Quality in

Plasma Arc Welding using Statistical Approach, Asian International Journal of Science and Technology in Production and Manufacturing Engineering, Vol. 3, No.4, October - December , 2010 ISSN:1906-151X pp. 29-35.

150. Mir Sadat Ali, P. Vijaya Kumar, C.V.Gopinath, Ch.Srinivasa Rao Affect of Different Input Parameters on Weldment Characteristics in Tungsten Inert Gas (TIG) Welding American Journal of Scientific Research ISSN:1450-223X Issue 12 (2010), pp.153-165.

151. M.Kaladhar, CH Srinivasa Rao, K.Narayana Rao, K. Venkata subbaiah Optimization of Process Parameters in Turning of AISI 202 Austenitic Stainless Steel. ARPN Journal of Engineering and Applied Sciences VOL. 5, NO. 9, SEPTEMBER 2010 ISSN: 1819-6608 pp. 79-87. (SCOPUS)

Year – 2008152. Revuru Rukmini Srikant, D Nageswara Rao, CH Srinivasa Rao, M Siva Subrahmanyam

Mathematical Modeling of the Influence of Emulsifier Content on Performance of Cutting Fluids Proceedings of J. Braz. Soc. Mech. Sci. & Engg. April-June 2008, Vol. XXX, No. 2 ISSN: 1678-5878 printed version ISSN: 1806-3691 online version, pp. 139-144 (SCIE and SCOPUS)

Year – 2007153. Ch.Srinivasa Rao, D.Nageswara Rao, RR Srikant Influence of Emulsifier Content on Properties

and Durability of Cutting Fluids Proceedings of J. of the Braz. Soc. of Mech. Sci. & Engg., October-December 2007, Vol. XXIX, No. 4 ISSN: 1678-5878 printed version, ISSN: 1806-3691 online version, pp 395-400. .(SCIE and SCOPUS)

Year – 2006154. Ch.Srinivasa Rao, D.Nageswara Rao, R N Someswara Rao On-Line Prediction of Diffusion

Wear on the Flank Through Tool Tip Temperature in Turning using Artificial Neural Networks Proceedings of the Institution of Mechanical Engineers, (IMech E) Part B, Journal of Engineering Manufacture, U.K. , December 2006, Vol.220, ISSN: 0954-4054 (Print), 2041-2975 (Online), pp. 2069-2076, (SCIE and SCOPUS)

Year – 2004

14

155. Ch.Srinivasa Rao, RR Srikant Tool Wear Monitoring- An Intelligent Approach Proceedings of Institution of Mechanical Engineers, (IMechE-2004), Part B, Journal of Engineering Manufacture, U.K. Vol 218, August 1, 2004, ISSN: 0954-4054 (Print), 2041-2975 (Online), pp. 905-912.(SCIE and SCOPUS)

National Journals:01

1. S Vijay and Dr. Ch. Srinivasa Rao, Simulated Optimum Temperature Distribution of Selective Laser Melting Process Using Design of Experiments, Technical Paper, Manufacturing Technology Today, published by 'Central Manufacturing Technology Institute', CMTI, Vol. 12, No. 11, November 2013, pp. 5-12.

CHAPTERS IN BOOK

156. Radhika Sajja, K Karteeka Pavan, Ch Srinivasa Rao, Swapna Dhulipalla, Evolutionary Optimization in Master Production Scheduling: A Case Study, in: Venkata Rao R., Taler J. (eds) Advanced Engineering Optimization Through Intelligent Techniques, Advances in Intelligent Systems and Computing, https://doi.org/10.1007/978-981-13-8196-6_33, Print ISBN 978-981-13-8195-9, Online ISBN 978-981-13-8196-6 vol 949. Springer, Singapore pp. 371-379.

157. N. Praveena Devi, Ch.Srinivasa Rao, K. Kiran Kumar, Numerical and Experimental Studies of Nanofluid as a Coolant Flowing Through a Circular Tube: select proceedings of the International Conference on Numerical Heat Transfer and Fluid Flow (NHTFF 2018), January 2019, DOI: 10.1007/978-981-13-1903-7_59, ISBN 978-981-13-1903-7, In book: Numerical Heat Transfer and Fluid Flow, pp 511-521.

158. S. Vijay and Ch. Srinivasa Rao, Geometry-Based Dynamic Behavior of Functionally Graded Material Under Fluctuating Loads, MECHANICAL ENGINEERING FOR SUSTAINABLE DEVELOPMENT State-of-the-Art Research Published by Apple Academic Press Inc. 3333, Mistwell Crescent Oakville, ON L6L 0A2, Canada, ISBN-13: 978-1-77188-681-9 (Hardcover), ISBN-13: 978-1-351-17016-1 (eBook) 2018, Chapter 23,pp.259-269.

159. R. R. Srikant and Ch. Srinivasa Rao, Application of Backpropagation Neural Networks in Calculation of Robot Kinematics, Chapter 18 in text book Case Studies in Intelligent Computing: Achievements and Trends, Edited by Biju Issac and Nauman Israr, Auerbach Publications, CRC Press, Print ISBN: 978-1-4822-0703-3, eBook ISBN: 978-1-4822-0704-0, DOI: 10.1201/b17333-19, Sept. 2014, pp.379 -390.

160. M. Kaladhar, K. Venkata Subbaiah, Ch. Srinivasa Rao, Influence of Tool Coating Materials and Parametric Optimization for Surface Quality and Flank Wear During Turning of AISI 304 Austenitic Stainless Steel Machining: Operations, Technology and Management Chapter 11: Materials and Manufacturing Technology,2013, (J. Paulo Davim, Univ. of Aveiro - Series Editor) ISBN: 978-1-62100-579-1, pp. 207-226.

International Conferences:37Year -20171. D. Swapna, Ch. Srinivasa Rao and S. Radhika, Influence of Process Parameters and Viscosity

on Radial Stresses of Magnesium Lithium Alloys in Fluid Assisted Deep Drawing Process presented and Published in the Proceedings of the COPEN 10, 2017 Conference - IIT Madras Chennai during 7th December – 9th December 2017( paper id-167).

2. Sreenivasulu Reddy and Srinivasa Rao Chalamalasetti Optimization of Machining Parameters During Drilling of Aluminium 2014 Alloy Using CATIA V5 R19 And DEFORM-3D: Numerical Simulation and Experimental Validation presented and Published in the Proceedings of the COPEN 10, 2017 Conference - IIT Madras Chennai during 7th December – 9th December 2017( paper id-352).

3. Sreenivasulu Reddy and Srinivasa Rao Chalamalasetti 2nd International Conference on Materials, Manufacturing and Design (iCMMD-2017) organized by Marathwada Institute of Technology (MIT), Aurangabad (M.S.), India in collaboration with Dr.Babasaheb Ambedkar Technological University (BATU), Lonere (M.S.), India. during11th-12th December 2017

4. S. Vijay and Ch. Srinivasa Rao Geometry Based Dynamic Behavior of Functionally Graded Material Under Fluctuating Loads, First International and the Eighteenth National ISME

15

Conference on Mechanical Engineering: Enabling Sustainable Development Organized by Department of Mechanical Engineering, National Institute of Technology, Warangal during February 23-25, 2017 ISME-MM-024

Year -20165. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao and Damera Nageswara Rao

Investigation on Pitting Corrosion Rate of Pulsed Current Micro Plasma Arc Welded AISI 321 Austenitic Stainless Steel presented and Published in the Proceedings of the 6thInternational & 27thAll India Manufacturing Technology, Design and research Conference (AIMTDR–2016), ISBN: 978-93-86256-27-0, Organized by Department of Production Engineering, College of Engineering, Pune, Maharashtra, INDIA during December 16-18, 2016, pp. 52-54.

6. Radhika S., Srinivasa Rao Ch., Neha Krishna D. and Swapna D. Master Production Scheduling for the Production Planning in a Dairy Industry using Teaching Learning based Optimization Method presented and Published in the Proceedings of the 6thInternational & 27thAll India Manufacturing Technology, Design and research Conference (AIMTDR–2016), ISBN: 978-93-86256-27-0, Organized by Department of Production Engineering, College of Engineering, Pune, Maharashtra, INDIA during December 16-18, 2016, pp. 860-862.

7. Mantrala K. Mallik, Srinivasa Rao Ch and Kesava Rao V.V.S Influence of heat Treatment on Tensile Properties of LENS Deposited Co-Cr-Mo alloy presented and Published in the Proceedings of the 6thInternational & 27thAll India Manufacturing Technology, Design and research Conference (AIMTDR–2016), ISBN: 978-93-86256-27-0, Organized by Department of Production Engineering, College of Engineering, Pune, Maharashtra, INDIA during December 16-18, 2016, pp. 1382-1385.

8. Radhika S., Srinivasa Rao Ch., Neha Krishna D. and Karteeka Pavan K. Multi-Objective Optimization of Master Production Scheduling Problems using Jaya Algorithm presented and Published in the Proceedings of the 6thInternational & 27thAll India Manufacturing Technology, Design and research Conference (AIMTDR–2016), ISBN: 978-93-86256-27-0, Organized by Department of Production Engineering, College of Engineering, Pune, Maharashtra, INDIA during December 16-18, 2016, pp. 1729-1732.

9. Mantrala Kedar Mallik, Ch. Srinivasa Rao, V. V. S. Kesava Rao, Abdul Munaf Sk, Effect of Heat Treatment on Corrosion Behaviour of Weld Deposited Co-Cr-Mo Alloy, presented in The 5th International Conference on Production, Energy and Reliability (ICPER 2016) organized in Kuala Lumpur Convention Centre, Malaysia, 16th -18th August, 2016.

10. Abdul Munaf Sk, Ch. Srinivasa Rao, V. V. S. Kesava Rao, Mantrala Kedar Mallik, Application of Modularity in a Piston Pump Assembly Line of a Hydraulic System , presented in The 5th

International Conference on Production, Energy and Reliability (ICPER 2016) organized in Kuala Lumpur Convention Centre, Malaysia, 16th -18th August, 2016.

Year- 201511. S.Radhika and B.Ravi Raja D.Swapna, Ch.Srinivasa Rao Deep Drawing Process: A Brief

Overview published in the Proceedings of National Conference on Advancements in Metals and Manufacturing Systems (NCAMMS-2015) Organized by Department of Mechanical Engineering,QIS College of Engineering and Technology, Ongole, during 26 th September 2015, pp. 12-16

Year – 2014

12. Mantrala Kedar Mallik, Ch. Srinivasa Rao, Dr. V.V.S. Kesava rao EFFECT OF HEAT TREATMENT ON HARDNESS OF CO-Cr-MO ALLOY DEPOSITED WITH LASER ENGINEERED NET SHAPING Published in the journal and paper presented in 12th Global Congress on Manufacturing and Management (GCMM2014), 8th -10th December-2014, Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8th -10th, 2014.

13. Varaprasad .Bh, Srinivasa Rao. Ch, P. V. Vinay Effect of Machining Parameters on Tool Wear in Hard Turning of AISI D3 Steel Published in the journal and paper presented in 12th Global Congress on Manufacturing and Management (GCMM2014), 8 th -10th December-2014, Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8th -10th, 2014.

14. Kondapalli Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao, " Study on Weld Quality Characteristics of Micro Plasma Arc Welded Austenitic Stainless Steels Published in the journal and paper presented in 12th Global Congress on Manufacturing and Management

16

(GCMM2014), 8th -10th December-2014, Organised by School of Mechanical and Building Sciences, VIT University, Vellore In Association With Queensland University Of Technology, Australia

15. Lanka Rasidhar, A.Rama Krishna,CH.Srinivasa Rao, and K.Vijaya Lakshmi Development and Evaluation of Mechanical Properties of Al/Ilmenite Nanocomposite Published in the Proceedings of the International Conference on Mechanics and Control Engineering (ICMCE 2014) Asheville, North Carolina, USA / October 26-28, 2014,

16. Kondapalli Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao, Investigation on effect of pulsed current MPAW parameters on weld quality characteristics at various thicknesses of AISI 304L Sheets, Published in the Proceedings of the international conference The 3rd Global Conference on Materials Science and Engineering (CMSE 2014) in association with associated with the 9th International Flame-retarding Material Technology Exhibition & International Forum (CFRS 2014, http://www.flameexpo.com/) held in Shanghai during Oct. 20th -23rd , 2014, pp.76-86

Year – 201317. S. Radhika, Ch. Srinivasa Rao, K. Karteeka Pavan “A new teaching-learning-based

optimization method for multi-objective optimization techniques for master production scheduling problems”, Published in the Proceedings of the international conference on advanced engineering optimization through intelligent techniques(AEOTIT), July 01-03, 2013, Organized by Department of Mechanical Engineering, S.V. National institute of technology, Surat, Gujarat, india, pp. 459-463.

18. Reddy Sreenivasulu & Ch.Srinivasa Rao, presented a paper titled ”Experimental investigation on influence of Nano fluids in drilling of Al6061 alloy using Grey based-Taguchi Approach”, International Conference on Material Processing and Characterization (ICMPC-2013) conducted by GRIET, Hyderabad on 16-17 March 2013.

19. Reddy Sreenivasulu & Ch.Srinivasa Rao, presented a paper titled ”Modeling and Optimization of Thrust Force and Torque during Drilling of Aluminum 6061 alloy using Taguchi-Grey Analysis Approach”, International Conference on Material Processing and Characterization (ICMPC-2013) conducted by GRIET, Hyderabad on 16-17 March 2013.

Year – 201220. Kondapalli Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao, “Effect of welding current

mode on weld quality characteristics of Micro Plasma Arc Welded Inconel 625 welds" Published in the proceedings and paper presented in 4th International & 25th AIMTDR Conference( AIMTDR 2012), 14th - 16th December, 2012, organized by Production Engineering Department, Jadavpur University, Kolkata, West Bengal, pp123-125.

21. Kondapalli Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao, Simhadri Phani Kumar Effect of welding speed on weld quality characteristics of pulsed current micro plasma arc welded AISI 304L Sheets " Published in the proceedings and paper presented in 11th Global Congress on Manufacturing and Management (GCMM2012), 28-30 November 2012 organized by AUT University, Auckland, New Zealand pp. 370-378.

22. Sadat ali, Ch.Srinivasa Rao,D.Nageswara Rao, Modeling the Effects of Preheating on Angular Distortions in One Sided Fillet Weld " Published in the proceedings and paper presented in 11th Global Congress on Manufacturing and Management (GCMM2012), 28-30 November 2012 organized by AUT University, Auckland, New Zealand, pp. 390-397.

23. Reddy Sreenivasulu & Ch.Srinivasa Rao, presented and published a paper titled “Optimization of operating parameters to minimize burr size in drilling using taguchi method & grey relational analysis for A1 6061” in the proceedings of International Conference on Challenges On Mechanical engineering and Industrial management (ICCOMIM - 2012 ), MSRIT Bangalore on 11-13 July2012, pp829-833,ISBN:978-93-82338-05-5.

24. Kondapalli Siva Prasad,Ch.Srinivasa Rao,D.Nageswara Rao, A comparative study of weld quality characteristics of various austenitic stainless steels welded using pulsed current micro plasma arc welding process, Published in the proceedings and paper presented in International Conference on 'Recent Advances in Mechanical Engineering - INCRAME 2012 organized by : Dr.MGR Educational & Research Institute University, Chennai, India, April 19-20, 2012.

17

25. Kondapalli Siva Prasad, Y. V. Srinivasa Murthy, Ch. Srinivasa Rao, D. Nageswara Rao and Gurrala Jagadish Unconstrained Optimization for Maximizing Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets Published in the proceedings and paper presented in International Conference on Information Systems Design and Intelligent Applications 2012 (INDIA 2012) organized by Computer Society of India, Visakhapatnam Chapter, in association with Rashtriya Ispat Nigam Limited held in Visakhapatnam, India, 5-7, January 2012 Proceedings of the Springer. Advances in Intelligent and Soft Computing, 2012, Volume 132/2012, 345-352, DOI: 10.1007/978-3-642-27443-5_39.

Year – 201126. K. Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao, Y.V.Srinivasa Murthy Optimizing

Fusion Zone Grain Size and Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welding Welded SS304L Sheets using Hooke & Jeeves Algorithm Published in the Proceedings of The International Conference on Futuristic Trends in Materials & Energy Systems (Ftme-2011), 29 – 30 December, 2011 Under The Auspices of University of Ontario Institute of Technology Canada, Organized by Department of Mechanical Engineering, Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada. pp 112-119

27. K.SivaPrasad, Dr.Ch.Srinivasa Rao, Dr.D.Nageswara Rao Predication of pulsed current Micro Plasma Arc Welding Process parameters to obtain weld pool Geometry in SS304L Stainless Steel Published in the proceedings and paper presented in International Conference on Recent Advances in Mechanical Engg INCRAME 2011 during April 21-22, 2011 Dr. M.G.R. Educational & Research Institute University Phase II, Adayalampattu, Chennai Paper code IE-046

Year – 201028. K.SivaPrasad, Dr.Ch.Srinivasa Rao, Dr.D.Nageswara Rao “Predication of Weld Quality in

Plasma Arc Welding using Statistical Approach” Published in the proceedings and paper presented in 9th Global Congress on Manufacturing and Management (GCMM-2010), November 22nd

– 24th, 2010, Bangkok, Thailand, Page 296-301.

Year – 200829. Ch.Srinivasa Rao, D.Nageswara Rao, Balaji Jarabala Bottleneck in Machine cell formation

for cellular manufacturing systems using an ant colony optimization system Published in the proceedings and paper presented in 24th AIMTDR and 2nd International conference organised by IIT-Madras, Chennai during Dec. 13th -14th, 2008, pp 1147- 1152.

30. CV. Gopinath, Mir Sadat Ali, Ch. Srinivasa Rao Static and Thermal Analysis of Single Point Cutting Tool with Reverse Engineering Published in the proceedings and paper presented in 9th

Global Congress on Manufacturing and Management (GCMM2008) during 12th -14th, November

2008, Holiday Inn, Surfers Paradise, Australia pp 653-657.

Year – 200731. Ch.Srinivasa Rao, D.Nageswara Rao, S. Narayana Rao, Y. Seetarama Rao Intelligent

Control of the Motion and Trajectory of a Welding Robot Published in the proceedings and paper presented in International Conference on Modeling and Simulation (Emerging Methods towards Frontier Technologies), CITICOMS 2007, organized by Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore, during August 27-29, 2007 , Vol.I, pp 478-482.

Year – 200632. Ch.Srinivasa Rao, D.Nageswara Rao, S. Narayana Rao, Y. Seetarama Rao Intelligent

Prediction of steel Production in Basic oxygen Process Published in the proceedings and paper presented in International Conference on "Recent Advances in Materials and Processing (RAMP-2006) held at Department of Metallurgical Engg., PSG College of Technology, Coimbatore during December 15-16, 2006.

Year – 200433. Ch.Srinivasa Rao, RR Srikant Application of Artificial Neural Networks in Kinematics of

Robotic Manipulators Published in the proceedings of Third International Conference on Theoretical, Applied, Computational and Experimental Mechanics, (ICTACEM 2004), Department of Aerospace Engineering, Indian Institute of Technology, Kharagpur, India held during December 28 th-30th, 2004, pp 413-415.

18

34. Ch.Srinivasa Rao, CV Gopinath Static and Thermal analysis of Radiator Fan Blade of Diesel Locomotive Engine of Indian Railways Published in the proceedings of first international Conference, Global Congress on Manufacturing and Management - 2004 (GCMM-2004), Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8th -10th, 2004, pp 554-560.

35. Ch.Srinivasa Rao, D.Nageswara Rao, RR Srikant Intelligent control of the Motion and path of a robotic arm Published in the proceedings of first international Conference, Global Congress on Manufacturing and Management - 2004 (GCMM-2004), Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8 th -10th, 2004, pp 466-469.

36. Ch.Srinivasa Rao, RR Srikant Tool Flank Wear Estimation –An Intelligent Approach World Automation Congress 2004, held in Spain from June 28th –July 1st,2004.

37. Ch.Srinivasa Rao, RR Srikant Tool Condition Monitoring –An Intelligent Approach World Automation Congress 2004, held in Spain from June 28th –July 1st, 2004.

National Conferences:131. D.Swapna, Ch.Srinivasa Rao, S.Radhika, B.RaviRaja,Deep Drawing Process: A

Brief Overview National Conference on Advancements in Metals and Manufacturing Systems 2015 (NCAMMS 2015), organized by Department of Mechanical Engineering. QIS College of Engineering & Technology. Vengamukkapalem, Pondur Road,.ongolu, during 26th September 2015 pp. 12-16.

2. L. Rasidhar, A.Ramakrishna, Ch.Srinivasa Rao, “Synthesis and Characterization of Cast Aluminium Reinforced with Nano Ilmenite (FeTio3) Composites”, Published in the Proceedings of National Conference on Frontiers in Mechanical Engineering (FIME 2013) is Organized by: MANIT Bhopal, Madhya Pradesh, 29th -31st August 2013, pp. 200-204.

3. NV Swamy Naidu, B.Sateesh, Ch.Srinivasa Rao, Development of Degenerated Shell Element, Published in the Proceedings of National conference on Advances in Mechanical Engg (NCAME 2013) during April 5th -6th, 2013 held at Organized by school of Mechanical Engineering, vignan university vadalamudi, Guntur pp.27-32.

4. K.Siva Prasad, Dr.Ch.Srinivasa Rao, Dr.D.Nageswara Rao,A vasista, Shehnaz Khatoon Investigation on effect of welding speed on mechanical properties of Pulsed Current Micro Plasma Arc Welding of SS304L Sheets Published in the Proceedings of first National conference on Advances in Mechanical Engg (NCAME 2012) during March 27, 2012 held at Organized by Department of Mechanical Engineering BAPATLA ENGINEERING COLLEGE BAPATLA (An Autonomous Institution of Acharya Nagarjuna University)

5. Ch.Srinivasa Rao,T Suneetha, PVS Ganesh Kumar, V. Ramamohana Rao, Geetanand Kedilaya “Acoustic analysis of dissipative silencer Using FEM technique” National Symposium on Acoustics Organized by Research Centre Imarat (DRDO) & Acoustical Society of India at Research Centre Imarat Hyderabad during Nov. 26-28, 2009

6. K.SivaPrasad, Dr.Ch.Srinivasa Rao, Dr.D.Nageswara Rao, Optimisation of surface finish in end milling using response surface method National Conference NCSAME-2009 conducted by JNTU College of Engineering, Hyderabad, 20 - 21 August 2009.

7. Ch.Srinivasa Rao, CV Gopinath T.Srinivas Information Technology in Operative Disaster Management in India Published in the Proceedings of the National Seminar on Role of IT in Disaster Management organized by IACR Engineering College, Rayagada, Orissa held during March 10th, 2006, pp 78-86.

8. Ch.Srinivasa Rao, CV Gopinath T.Srinivas Pollution Control by Blending Ethanol with Petrol in Engines Published in the Proceedings of the National conference on Environmentally Conscious Design and Manufacturing-issues and Challenges- ECDM-2004, Kumaraguru College of Technology, Coimbatore during July 23rd & 24th, 2004.

19

9. Ch.Srinivasa Rao, RR srikant, K. Lalitnarayan Optimization of CO2 Welding parameters for quality weld via artificial neural networks Published in the Proceedings of NCRTC-2004- AICTE Sponsored National Conference on Recent Trends in CAD/CAM/CAE Rajarambapu Institute of Technology, Raja Ramnagar, Sakhrale, Islampur, Maharastra held during June 21st – 23rd, 2004, pp 5.6-5.8.

10. Ch.Srinivasa Rao, RR Srikant, Intelligent Tool Wear Monitoring in Automated Factories Published in the Proceedings of First National Conference on Development and Challenges in Manufacturing Engineering 2004 (NCDCM-2004) organized by Manipal Institute of Technology, MAHE, Deemed University, Manipal Tamil Nadu during March 18 th -20 th, 2004, pp 500-505.

11. Ch.Srinivasa Rao, RR Srikant, P. Srinivasa Rao Recognition of Machine Cells in a Group Technology Layout via ART-2 Neural Network Published in the Proceedings of First National Conference on Development and Challenges in Manufacturing Engineering 2004 (NCDCM-2004) organized by Manipal Institute of Technology, MAHE, Deemed University, Manipal during March18th -20 th, 2004, pp 740-742.

12. Ch.Srinivasa Rao, D.Nageswara Rao, KNS Suman On-Line Prediction of Flank Wear using Remote Thermocouple Published in the Proceedings of Symposium on Manufacturing Excellence organized by IIT-Madras, Chennai during 6th-8th Jan. 2002, pp 91-92.

13. Ch.Srinivasa Rao, G.Dixit, MC Sharma Chronological development of shot feed valve for pressure peening system Published in the Proceedings of the first National Seminar cum workshop on SHOT PEENING and its Industrial Applications held during Dec. 13th -14th, 1991 at M.A.C.T., Bhopal, pp 178-186.

FELLOWSHIPS

Received Fellowship in Mentoring of Engineering Teachers by INAE Fellows---on R&D or design-

oriented projects --- Mentor is Dr. V. Bhujanga Rao Director, FNAE, Director, NSTL, Visakhapatnam

from 1st May -30th June 2008.

Received Fellowship in the International Travel Support Scheme (ITS) Department of Science & Technology, New Delhi (SERC DIVISION) and from UGC for attending the 9th Global Congress on

Manufacturing and Management (GCMM2008) 12th -14th, November 2008, Holiday Inn, Surfers

Paradise, Australia

Countries Visited: Australia-BRISBANE------ 10 -15 November 2008 Thailand – Bangkok----16 November 2008

Area of Research work:

20

Metal Cutting

Robotics

Manufacturing Processes

Neural Networks

Thermodynamics

Material Science

Computer Aided

Manufacturing

Tolerances in

components

Image Processing

Mechatronics

Product Design

Concurrent Engineering

21

Guest Lectures Delivered:

1. CNC programming under a CEPTAM training course on “CNC Turning Practices” held at NSTL Visakhapatnam on 26th August 2013.

2. Introduction of CNC machine tools and programming under continuing education programme held at NSTL Visakhapatnam on 24th September 2012.

3. Introduction of CNC programming under continuing education programme held at NSTL Visakhapatnam on 20th August 2011.

4. Robotics at Faculty Development Programme organized by Chaitanya Engineering College Kommadi, Visakhapatnam 20th January 2010

5. Robotics at Faculty Development Programme organized by College of Engineering, Anil Neerukonda Institute for Technology and Sciences, Sanghivalasa during 18th-20th, June 2009.

6. Thermodynamics organized by Mechanical Engg. Dept., College of Engineering, Jagannath Institute for Technology and Management (JITM), Paralakhemundi, Orissa on 09 December 2007.

7. Keynote Address on “Computer Aided Manufacturing” on 9th July, 2007 at AICTE Staff Development Programme “Computer Aided Design and CNC Manufacturing” organized by Mechanical Engg. Dept., College of Engineering, Jagannath Institute for Technology and Management (JITM), Paralakhemundi, Orissa during 02-14, July 2007.

8. CNC Part Programming on 9th July, 2007 at AICTE Staff Development Programme “Computer Aided Design and CNC Manufacturing” organized by Mechanical Engg. Dept., College of Engineering, Jagannath Institute for Technology and Management (JITM), Paralakhemundi, Orissa during 02-14, July 2007.

9. Robotics organized by Mechanical Engg. Dept., Jagannath Institute for Technology and Management (JITM), Paralakhemundi, Orissa on 04-04-2007.

10. Robotics organized by Mechanical Engg. Dept., College of Engineering, GMRIT, Rajam on 04-09-2004.

11. Robotics: An Overview at AICTE Staff Development Programme on CAD-CAM Integration and Applications, organized by Mechanical Engg. Dept., College of Engineering, GITAM during May 05-17, 2003.

12. As a part of Industry-Institute Interaction delivered lectures on Manufacturing Processes, Metallurgy and Heat treatment of steels at NSTL Visakhapatnam during the academic year 1997-98.

Conferences, Seminars and Short Term Courses Organized:

1. Co-Convener for organizing National Conference on "RECENT TRENDS IN MANUFACTURING" (Sponsored by UGC SAP CAS-I) on 29th March 2018.

2. Co-Convener for organizing One Day National Seminar on "MATERIALS AND MANUFACTURING" (Sponsored by UGC SAP CAS-I) on 23rd March 2017.

3. Co-Coordinator for organizing a National Workshop on “ADVANCED TRENDS IN MANUFACTURING” (ATM 2011)” on July 30th , 2011 in view of the superannuation of our professor Dr D.Nageswara Rao from the department on 30 July 2011.

22

4. Programme Committee Member in 3rd International and 24th AIMTDR Conference organized by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam during 13th–15th, December 2010.

5. Coordinator for two day Workshop on TOOL DESIGN AND IT’S APPLICATIONS (under TEQIP networking program) and organized by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam during March 20th& 21st, 2009

6. Coordinator for two day Workshop on INTELLIGENT MANUFACTURING (under TEQIP networking program) and organized by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam during March 16 th& 17th, 2009

7. Transport committee member in 95th Indian Science Congress held at Andhra University, Visakhapatnam during January 3rd- 7th, 2008.

8. Coordinator for three day workshop on Finite Element Analysis Sponsored by TEQIP Networking Institutions and organized by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam during 15th - 17th November 2007.

9. Advisory Committee Member in MESCON 2007 organized by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam during 27th - 28th September 2007.

10. 20th National Convention of Marine Engineers “Dredging and integrated Development of Inland Waterways” organized by Institution of Engineers(India) Visakhapatnam Local Centre on February 24-25, 2007

11. As Coordinator, Techno-preneurship development programme on “Advanced Composites” Materials, Manufacture and Applications conducted by Dept. of Mechanical Engineering, GITAM, College of Engineering, Visakhapatnam and Sponsored by TIFAC, Department of Science and Technology(DST), New Delhi & Small Industries Development Bank of India, Visakhapatnam during July 17th to 22nd, 2006,

12. Short term Training Program on “Industrial applications of Finite element analysis using ANSYS Package" during February 07-12,2005 conducted by Dept. of Mechanical Engineering, GITAM, College of Engineering, Visakhapatnam

13. Convener, A first National level Technical Seminar–Mechanical Engineers’ Technical Ensemble-2003, METE-2003, by Mechanical Engg. Dept., College of Engineering, GITAM during February 13th -14th, 2003.

14. Associated in organizing AICTE Staff development Programme on CAD-CAM Integration and applications conducted by Mechanical Engg. Dept., College of Engineering, GITAM during May 05th -17th, 2003.

15. Associated in organizing the Seminars, Conferences by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam viz., FTAME-98, MESCON-98, III-ES, MESCON-2001, MESCON-2003, MESCON-2005 and MESCON-2007.

Courses Taught:At AU, College of Engineering ( Autonomous)

23

Mechanics of Solids Engineering Thermodynamics-

II Production Drawing Robotics Robotics----M.E.(Machine

Design) Manufacturing Technology-III

Concurrent Engineering----M.E.(CAD/CAM)

CIM--M.E.(CAD/CAM) Vision Systems and Image

Processing Measurements and CNC Applied Thermodynamics-II

24

At GITAM:

25

Robotics----M.E.(CAD/CAM, M.D)

Computer Aided Design Manufacturing Technology-I Thermal Prime Movers Manufacturing Technology-III Machine Drawing

Production Drawing Applied Thermodynamics Metallurgy Advanced Welding and Foundry

Technology

Vision Systems and Image Processing----M.E.(CAD/CAM)

Robotics

26

Books Reviewed Internal Combustion Engines by V Ganesan Tata

McGraw Hill Education Pvt. Ltd.

Short Term Courses/ Summer/Winter Schools & Workshops attended: 19 Weeks

1. Short term course on “Finite element analysis in Structural Engineering" during July 20th-August 18th, 2001 conducted by National Ship Design and Research Centre (NSDRC), Visakhapatnam.

2. ISTE Short term course on “Metal Forming and its Modeling Techniques" during July 10-21, 2000 conducted by centre for development of technical education, Indian Institute of technology, Kanpur, U.P.

3. AICTE sponsored ISTE Short term course on “Recent advances in metal shaping techniques" during Nov.15-28, 1999 conducted by Dept. of Metallurgical Engg. P.S.G. College of Technology, Coimbatore (T.N.).

4. AICTE-ISTE sponsored winter school on “System Approach to CIM (Computer Integrated Manufacturing)” conducted by Department of Mechanical Engg, Regional Engineering College, Warangal, A.P. During Dec. 28 th, 1998 to Jan. 8 th, 1999.

5. “Computer Awareness Programme” during August 11-30, 1997 (CAP-97) conducted by Computer Education and Training Centre, Department of CSSE, GITAM College of Engineering, Visakhapatnam.

6. AICTE sponsored ISTE Summer School on “Design and Computer Simulation of Pneumatic / Electro-Pneumatic Systems for Mechanization" during May 11-24, 1997 conducted by Dept. of Production & Mechanical Engg. P.S.G. College of Technology, Coimbatore (T.N.).

7. ISTE sponsored Summer School on “Characterization and Testing of Materials" during July 10-23, 1995 organized by Department of Mechanical Engg. at M.A.C.T., BHOPAL (M.P.).

8. ISTE sponsored Winter School on “CNC & CAM” during Dec. 26th 1994 to Jan. 7th

1995, organized by Dept. of Mechanical Engineering, Andhra University, College of Engineering, Visakhapatnam.

Conferences, Seminars Participated:

At AU, College of Engineering ( Autonomous)

1. Chaired the technical Session on 17th Dec.2016, from 4pm-6pm, at 6th International and 27th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2016 during 16th to 18th

December 2016 organised by Department of Production Engineering and Industrial Management, College of Engineering, Pune.

2. Chaired the Technical Session on 10-12-2014 in 12th GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT GCMM 2014 Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8th -10th, 2014.

3. Chaired the Technical Session on 08-12-2014 in 12th GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT GCMM 2014 Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8th -10th, 2014.

27

4. National Seminar On Empowering Youth with Values and Ethics Role of Higher Education Institutions on 03rd July 2013 organized Andhra University, Visakhapatnam Seminar Hall–1 Platinum Jubilee Guest House Andhra University, Visakhapatnam.

5. Chaired the Technical Session as panel Judge in INCENDIVE-XI a National seminar for Mechanical Engineering students organized by Mechanical Engg. Dept Chaitanya Engineering College Kommadi, Visakhapatnam 10th February 2011.

6. Chaired the Technical Session as panel Judge in 3rd International and 24th AIMTDR Conference organized by Mechanical Engg. Dept., AU, College of Engineering, Visakhapatnam during 13th–15th, December 2010.

7. Chaired the Technical Session in 9th Global Congress on Manufacturing and Management (GCMM-2008) 12th -14th

, November 2008, Holiday Inn, Surfers Paradise, Australia

8. Chaired the Technical Session in MECHON-2K8 a National seminar for mechanical &Chemical Engineering students organized by Mechanical Engg. Dept., Al-Ameer College of Engineering and Information Technology, Gudilova, Anandapuram, Visakhapatnam on October, 18th

, 2008.

9. Chaired the Technical Session in MSMS-2008 (An International Meet)) organized by Mechanical Engg. Dept., College of Engineering, Andhra University, Visakhapatnam on June 29-30, 2008.

10. Panel Judge in Conspectus-The Technical paper presentation in TRISHNA 08, A National Level Technical Symposium organized by Department of IPE, College of Engineering, GITAM University,Visakhapatnam during March 4th & 5th, 2008.

11. Panel Judge in Technowiz, Mechmantra-08, a National Conference of Mechanical Engineering Students Conference-2008 organized by Mechanical Engg. Dept., RVR & JC College of Engineering, Guntur during15-16 February 2008.

12. National Workshop on Composite Materials organized by Dept. of Metallurgical Engineering, AU, College of Engineering, Visakhapatnam on February 27-28, 2007.

13. 20th National Convention of Marine Engineers “Dredging and integrated Development of Inland Waterways” organized by Institution of Engineers(India) Visakhapatnam Local Centre on February 24-26, 2007

14. Chaired the Technical Session in 51st Congress of ISTAM 2006 (Indian Society for Theoretical and Applied Mechanics-2006(An International Meet)) organized by Mechanical Engg. Dept., College of Engineering, Andhra University, Visakhapatnam on December, 18-21, 2006.

15. Presented a paper International Conference on "Recent Advances in Materials and Processing (RAMP-2006) held at Department of Metallurgical Engg., PSG College of Technology, Coimbattore during December 15-16, 2006.

At GITAM:

1. Chaired the Technical Session in MESCON 2005 (Mechanical Engineering Students Conference-2005) organized by Mechanical Engg. Dept., College of Engineering, Andhra University, Visakhapatnam on Sept. 29-30, 2005.

2. One Day workshop on Condition Monitoring of Mechanical Systems conducted by Dept. of Mechanical Engineering, GITAM, College of Engineering, Visakhapatnam on March 24, 2005.

3. Chaired the Technical Session in First International Conference, Global Congress on Manufacturing and Management - 2004 (GCMM-2004), Jointly organized by Queensland

28

University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8 th -10th, 2004.

4. Presented a paper in First International Conference, Global Congress on Manufacturing and Management - 2004 (GCMM-2004), Jointly organized by Queensland University of Technology, Australia and Vellore Institute of Technology, Vellore during Dec. 8th -10th, 2004.

5. “Symposium on Manufacturing Excellence (SYMAX)”during 6-8 Jan. 2002 organized by Manufacturing Engineering Section, Mechanical Engineering Department, IIT-madras, Chennai.

6. 19th AIMTDR-2000 (All India Manufacturing Technology Design and Research) conference held during Dec.14-16, 2000 organized by Manufacturing Engineering Section, Mechanical Engineering Department, at IIT Madras, Chennai.

7. “Industrial safety & Environmental Awareness” jointly conducted by College of Engineering, GITAM and Andhra University, Visakhapatnam on May 2-3, 1999.

8. AICTE sponsored National Seminar on “Fuzzy Technique Applications in Manufacturing and Engineering” (FTAME-98) conducted by Dept. of Mechanical Engineering, Andhra University, College of Engineering, Visakhapatnam on March 20-21, 1998.

9. Symposium on “Information Technology – A Road to Organizational Excellence" held at Dept. of CSSE, College of Engg., GITAM, Visakhapatnam INFACT-97 on April 7, 1997.

10. ISTE Programme “Performance Appraisal and Development Systems" conducted by College of Engg. GITAM-ISTE Chapter Visakhapatnam during May 11-13, 1995.

11. National Seminar and Workshop on “SHOT PEENING and its Industrial Applications” held during December 13th- 14th, 1991 at M.A.C.T., BHOPAL.

12. VI National Convention of Metallurgists and Material Scientists organized by Institute of Engineers [INDIA] Udaipur Feb. 1st and 2nd 1991, on the “Role of Metals and Materials in Process Industry”.

Industrial Training:

1. Training at BHEL, BHOPAL during April – May 1990.2. Training at BEL – MC Unit, Machilipatnam from 13.10.1990 to 24.11.1990.

Membership in Professional Bodies:Executive Council member in Institution of Engineers (India) Visakhapatnam Local Centre from November 2007- 2009.

1. Life Member of Indian Society for Technical Education (MISTE) ----- LM 17205. 2. fellow of Institution of Engineers (India)

FIE ------------F/11482-5.3. Life member of Condition Monitoring Society of India.

LM-----------080118References:

1. Dr D. Nageswara Rao, Vice chancellor, Centurion University of Technology & Management, Odisha, India

E-mail: vc@cutm.ac.inIndia. Mobile : 09966570585 e-mail: d_nageswara_rao@rediffmail.com.

29

2. Dr. S. Narayana Rao, Professor, Department of Industrial Production Engg., GITAM, College of Engineering, Visakhapatnam, A.P. India. Pin: 530 045.

Mobile : 09885896744(Mobile) , e-mail: nrsambana_8888@yahoo.co.in

Academic and Administrative Experience at AU College of Engineering:

In-charge, Telephones and communications by Andhra

University from December 2018 to till date

Member, Scrap Disposal Committee, by Andhra University

from December 2018 to till date

DEAN TRANSPORT by Andhra University from November

2017 to Till Date.

In-charge Computations/CAD Lab from the academic year

2015 to 2018.

Member of Departmental Research Committee from 1st

August 2009 to 2017, to convince and motivate in developing research activities in the Mechanical

Engineering Department such as Ph.D. works.

Timetable in charge for the academic year 2007-08 to 2010-

11.

Attended 10 short term courses and 17 conferences,

workshops and Symposia's at national and International level and presented Technical Papers.

Served in Various Administrative positions like Member in

Various committees like NBA, UGC XI plan, NAAC & AICTE accreditations, of AUCE (A) and

Observer for various competitive examinations like EAMCET, BCAT, MCA, ICET and associated in

admission work of UG, PG and Research programmes.

In-charge Metrology Lab from the academic year 2007 to

2012.and 2013 to 2015.

Chief superintendent of BE (part time), BE/ B.Tech

(Regular), ME./ M,Tech. Examinations and acted as chief teacher associate to conduct Spot

Valuation for the same.

Paper Setter in various ME/M.Tech.Courses for JNT University, ANU, SVU.

Paper Setter in various BE/B.Tech Courses for JNT University, ANU, UTKAL, Andhra University, Berhampur University etc.

Examiner in various BE/B.Tech Courses for Andhra University, JNT University, ANU, UTKAL, SVU, Andhra University, Berhampur University etc. from the last 18years.

Academic and Administrative Experience at College of Engineering, GITAM:

Course Coordinator for ME (CAD/CAM) from September 2005 to Oct. 2006.

Member of Departmental Research Committee from Dec. 2004 to Oct. 2006, to convince

and motivate in developing research activities in the department such as Ph.D. works, publications in

30

journals and Conferences, organizing seminars and Conferences, Research Projects under various

funding agencies AICTE, DST, CSIR, UGC schemes.

Member of Board of Studies in Mechanical Engineering Department from Dec. 2004 to

Oct. 2006, to deal with the academic activities in the department such as Curriculum Development for

autonomous system, Guidelines for the award of sessionals, Attendance, initiating for UG & PG

programmes in the department etc.

Chief Coordinator for Mid Examinations from Dec. 2004 to May 2006..

Member of Departmental Academic Committee from Dec. 2004 to Oct. 2006, to look after

academic activities in the department such as class work, sessionals, Attendance, initiating for PG

programmes etc.

Member of College level Research and Development Council from Nov. 2004 to Oct. 2006,

to encourage and develop research activities in the campus such as Ph.D. works, publications in

journals, Research Projects under AICTE, DST, CSIR, UGC schemes.

Coordinator for BE/ME Projects and prepared the guidelines for comprehensiveness of the

students project work from May 2003-Dec 2004.

Convener, A first National level Technical Seminar–Mechanical Engineers’ Technical

Ensemble-2003, METE-2003, by Mechanical Engg. Dept., College of Engineering, GITAM during

February 13th -14th, 2003.

In-charge for CAD/CAM Lab from its inception May 1998 to May 2003. Responsible in

developing the Lab by procuring & Installing the hardware and software.

In-charge ATD-I Lab from Dec.’ 92 to May ’98.

As part of Industry-Institute Interaction, delivered guest lectures at NSTL Visakhapatnam

during the academic year 1997-98.

Organizing industrial tours every year to Visakhapatnam Steel Plant for both second and

third year students of Mechanical & Production Engineering.

Timetable in charge for the academic years 1995-2000.

Coordinator for mid examinations during 1992-95.

Involved in cultural activities for the students in organizing Mechanical Association function

and thus building up the student-teacher relationship. Involved in coordinating ISTE- Student Chapter work during 1996-97.

In-charge of the Department Library for the academic year 1998-1999.

Papers Reviewed

International Journal papers reviewed----articles on regular basis for fifteen international journals. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering

Manufacture

Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile

Engineering Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

31

Proceedings of Journal of Brazilian. Society Mechanical. Sciences & Engineering.

-------------------------- and many more

List of Projects guided (Post Graduate)

Year Title of the Project

2003 Tool Wear monitoring using Artificial Intelligence-----RR Srikant

2008 Bottleneck in machine cell formation for cellular manufacturing systems

using an ant colony optimization and genetic algorithm approach----J.Balaji

2009 Modeling and analysis of dissipative Acoustic silencer----- Sunitha T,

2009 Elastic Buckling of Cylindrical Shell under External Hydrostatic Pressure----Vijaya Devi T.

2009 Web design for the Material Selection for Mechanical Components----Surya Nagendra

2009 Design and analysis of counter locking Mechanism for a slag pot-----Krishna Priya CH,

2009 Analysis of product using Quality Function Deployment-----Pragathi Seru

2009 Modeling and Analysis of Abrasive Water Jet Turning----- B.Bapi Raju

2013 Design and analysis of injection mould---- M.Srikanth

2013 Structural and Thermal analysis on a Taper roller bearing…. TVVR Malleswara Rao

2014 Design and development of an extrusion die ---Gautham Raju

2014 Simulation of deep drawing die for optimizing Die corner Radius----K. Anil Babu

2014 static Structural analysis of Shrink Fit with user Interface---- M. Kishore Kumar

2014 Vibration Buckling and Fracture analysis of a Cracked Cylindrical shell--Shaik Mujeebur

Rehman

2014 Design Modification of Profile Cold Shear Blades----N. Vamsi (B.E. + M.E.)

2015 Influence of process parameters in blanking using explicit dynamics-----Y.Ravali

2016 Analysis of Wire Drawing Process using Ansys------ Nammi Teja

2017 FEM analysis of extrusion through round and square dies----Chandana

List of Projects guided (Under Graduate)

Year Title of the Project2016-17 Design and analysis of knuckle joint Using Ansys

2015-16 Explicit static and dynamic analysis on gas turbine blade

2013-14 Interactive calculation of dimensional Tolerances and designing of Limit Gauges.

2010-11 Experimental investigations of parameters of resistance spot welding

2008-09 Leak test procedure by using Luminescent Hydro Testing Method

2006-07 Robotized Machine Vision System for Contour Welding Using MATLAB.

2005-06 Computer Aided Evaluation of geometrical tolerances- “CAEGT”.

2004-05 Computer Aided Dimensional tolerance analysis of Mating Parts—“CATMAP”.

2003-04 Application of AI in Steel Making.

2002-03 Tool Wear Monitoring using Neural networks.

2002-03 Mechanical design and prototype model of Shell and U-Tube heat exchanger.

32

2000-01 Tool Wear Monitoring-Diffusion Wear.

2000-01 On-line Tool Wear Monitoring.

1999-00 Design, simulation and control of a robot Arm-IRAP3.

1999-00 On-line Tool Wear Monitoring using Fuzzy Technique.

1997-98 Design and Simulation of PC controlled Robot.

1995-96 Gas turbines and no-load mechanical run Testing: A Case Study.

33