Wire jewelry DIY - how to make rings in butterfly pattern
Our tutorial of how to make rings in butterfly pattern proves
to result in attractive form without any exaggeration;
during this wire jewelry diy, we display all the relating
details, ranging from specific materials to clear step
picture.
Materials and tools:
1.5mm pink aluminum wire
Round nose plier
Flat nose plier
Wire cutter
Marker pen (or any ring mandrel)
This tutorial is going to demonstrate you a way about how to make rings in butterfly pattern; in this
tutorial, you will find wire jewelry diy is really a fancy thing to do.
Instructions:
Step 1: make a heart pattern at
one end
1st, snip a length of 30-35cm alum wire;
2nd, form a P shape with round nose plier;
3rd, at the top position of P, counter-clockwise
wrap a tiny loop;
4th, shape a heart pattern and coil the rest wire
below heart.
Step 2: make another heart at
other end
1st, pick a piece of thread and measure the
circumference of finger;
2nd, decide the length you should leave for ring
base;
3rd, make another heart in opposite direction.
Step 3: finish the butterfly ring
Tada, our how to make rings tutorial is done. During this wire jewelry diy, different color, sizes and
even diversified butterfly patterns can be experimented and applied into this sort of jewelry
making.
A variety of jewelry tools can be found in our webpage:
http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html
Wrap wire around marker pen and shape
out the full ring.
The finished work will look like this: