Travis Pattern & Foundry E. 1413 Hawthorne Road
P.O. Box 6325 Spokane, WA 99217
509.466.3545 www.travisugd.com
Utility Grounding Division
Grounding Clamps Catalog
DJL ToolTravis UGD
Key
Fea
ture
s
NA
Personal Protective Grounding. Tested to exceed Class 5requirements.
MADE IN THE USA
• Secures fuse barrels
• Light weight heat treated aluminum construction
• Easy ring attachment
• Raises wire and cable
• Assists tying in conductors (de-energized)
TP15ADBT15Travis UGD
Key
Fea
ture
s
1.5”
Personal Protective Grounding. Tested to exceed Class 5Hrequirements.
• Stainless steel 3/4-10 threaded eye screw - tested at 400 lbs-in
• Threaded ferrule connects 15 deg to adjusting screw
• 0-1 5/8” jaw opening with knurled contact surface
• 47kA for 15 cycles fault current rating
• Aluminum casting (ASTM F855 8.1)
• 400A continuous current rating
MADE IN THE USA
TP75ACAT15Travis UGD
Key
Fea
ture
s
• 400A continuous current rating
• Cable runs at 15 deg. to adjustable screw
• 0-3/4” jaw opening with knurled contact surface
• 47kA for 15 cycles X/R=30 fault current rating.
.75”
Personal Protective Grounding. Tested to exceed 5Hrequirements.
• Stainless Steel 5/8-11 threaded eye screw tested at 400 lbs-in
• Aluminum Casting A356-T6
MADE IN THE USA
TP15ACBT15Travis UGD
Key
Fea
ture
s
Personal Protective Grounding. Tested to exceed 5Hrequirements.
• 400A continuous current rating
• Jaw opening 0”-1.625 ” O.D. cable, pipe or stud
• Body contact surface serrated (ASTM F855 Class “B” SPEC)
• 47kA for 15 cycles X/R=30 fault current rating
• Threaded ferrule connects 15 deg to adjusting screw
• Ground clamp runs at a 15 deg. angle to adjusting screw
1.5”
MADE IN THE USA
TP2ACBT15Travis UGD
Key
Fea
ture
s
• 400A continuous current rating
• Aluminum casting A356-T6 (ASTM F855 8.1)
• Threaded ferrule connects 15 deg to adjusting screw
• 47kA for 15 cycles X/R=30 fault current rating
• Stainless steel 3/4x10 threaded eye screw - tested at 400 lbs-in
2”
Personal Protective Grounding. Tested to exceed 5Hrequirements.
• 0-2” jaw opening with knurled contact surfaceMADE IN THE USA
TP2ACBTSRTravis UGD
Key
Fea
ture
s
Personal Protective Grounding. Tested to exceed 7H requirements.
• Stainless steel 5/8x11 threaded eye screw - tested at 400 lbs-in
• 0-2” jaw opening with knurled contact surface.
• Threaded ferrule w/ strain relief over shroud
• 68kA for 15 cycles X/R=30 fault current rating.
• Aluminum casting (ASTM F855 8.1)
• 600A continuous current rating
2”
MADE IN THE USA
TP2ACBPSRTravis UGD
Key
Fea
ture
s
• Stainless Steel 5/8x11 threaded eye screw - tested at 400 lbs-in
• Plain ferrule is parallel to adjusting screw
• 0-2” jaw opening with knurled contact surface
• 43kA for 15 cycles fault current rating
• Aluminum Casting A356-T6 (ASTM F855 8.1)
• 400A continuous current rating
• Plug ferrule w/ strain relief over shroud
2”
Personal Protective Grounding. Tested to exceed Class 5requirements.
MADE IN THE USA
TP25ACAT20-SRTravis UGD
Key
Fea
ture
s
Personal Protective Grounding. Tested to exceed 7H requirements.
• Stainless steel 3/4-10 threaded eye screw tested at 400 lbs-in
• .162”-2.75” jaw opening with smooth contact surface
• Body contact surface smooth (ASTM F855 Class A SPEC).
• 68kA for 15 cycles fault current rating
• 600A continuous current rating
• Threaded ferrule with strain relief connects 20 deg to adjusting screw
2.5”
• Aluminum casting (ASTM F855 8.1)
MADE IN THE USA
TP6AR2T20-STravis UGD
Key
Fea
ture
s
6”
Personal Protective Grounding. Tested to exceed Class 5requirements.
• 47kA for 15 cycles X/R=30 fault current rating
• 800A continuous current rating w/ dual grounds
• Aluminum casting A356-T6 (ASTM F855 8.1)
• Threaded ferrule connects 20 deg to adjusting screw
• 1 1/2” x 6” long solid clamp stud
• 2 1/2” - 6 1/2” jaw opening with smooth contact surface for round bus 3” - 6”
• Stainless steel 3/4x10 threaded eye screw - tested at 400 lbs-in
• Lift ringMADE IN THE USA
TP15AFBT15Travis UGD
Key
Fea
ture
s
1.5”
Personal Protective Grounding. Tested to exceed class 5
requirements.
MADE IN THE USA
• 400A continuous current rating
• Threaded ferrule connects 15 deg to adjusting eye screw
• 43kA for 15 cycles fault current rating
• Stainless Steel 5/8-11 threaded eye screw tested at 400 in lbs
• Aluminum Casting A356-T6
TP15AFBT15-TTravis UGD
Key
Fea
ture
s
1.5”
Personal Protective Grounding. Tested to exceed class 5
requirements.
MADE IN THE USA
• 400A continuous current rating
• Threaded ferrule connects 15 deg to adjusting T Handle screw
• 43kA for 15 cycles fault current rating
• Stainless Steel 5/8-11 threaded T Handle screw tested at 400 in lbs
• Aluminum Casting A356-T6
TP15BFBT15Travis UGD
Key
Fea
ture
s
1.5”
Personal Protective Grounding. Tested to exceed Class 5requirements.
MADE IN THE USA
• 400A continuous current rating
• Threaded ferrule connects 15 deg to adjusting eye screw
• 47kA for 15 cycles X/R=30 fault current rating
• Stainless Steel 5/8-11 threaded eye screw tested at 400 in lbs
• Broze Alloy Casting for superior strength
TP15BFBT15-TTravis UGD
Key
Fea
ture
s
1.5”
Personal Protective Grounding. Tested to exceed Class 5requirements.
MADE IN THE USA
• 400A continuous current rating
• Threaded ferrule connects 15 deg to adjusting T Handle screw
• 47kA for 15 cycles X/R=30 fault current rating
• Stainless Steel 5/8-11 threaded T Handle screw tested at 400 in lbs
• Bronze Alloy Casting for superior strength
TP6ARA2T20-S(ET)Travis UGD
Key
Fea
ture
s
6”
Personal Protective Grounding. Tested to exceed Class 5requirements.
• 47kA for 15 cycles X/R=30 fault current rating
• 800A continuous current rating w/ dual grounds
• Aluminum casting A356-T6 (ASTM F855 8.1)
• Threaded ferrule connects at 20 deg to adjusting screw
• 1 1/2” x6” long solid clamp stud
• Stainless steel 3/4x10 threaded eye screw - tested at 400 lbs-in
• 2 1/2” -6 1/2” jaw opening with grooved surfaces for round, rectangular and anglular “T” bus
• Lift ringMADE IN THE USA
TP4X6AIWBT2T20-STravis UGD
Key
Fea
ture
s
4”x6”
Personal Protective Grounding. Tested to exceed Class 5requirements.
MADE IN THE USA
• Stainless steel 1x8 threaded eye screw - tested at 400 lbs-in
• Dual cable runs at 15 deg. to adjusting screw
• 3 1/2”-6 1/2” jaw opening with knurled contact surface for (IWC) integral web chanel
• 47kA for 15 cycles X/R=30 fault current rating
• Aluminum casting A356-T6 (ASTM F855 8.1)
• 800A continuous current rating w/ dual grounds
• 1 1/2”x6” long solid clamp stud
TP1BBSAT15Travis UGD
Key
Fea
ture
s
na”
Personal Protective Grounding. Tested to exceed class 5H
requirements.
MADE IN THE USA
• 400A continuous current rating
• Accepts standard 1” ball stud
• 47kA for 15 cycles X/R=30 fault current rating
• Stainless Steel 5/8-11 threaded eyescrew tested at 400 in lbs
• Copper Base Alloy casting (ASTM F855 8.1)
TP2AVBT30-DTravis UGD
Key
Fea
ture
s
2”
Personal Protective Grounding. Tested to exceed class 5H
requirements.
MADE IN THE USA
• Brass 5/8x11 threaded eye screw tested at 400 lbs in
• Cable runs at 30 deg. to adjusting screw
• 0-2” jaw opening with knurled contact surface
• 47kA for 15 cycles X/R=30 fault current rating
• Aluminum casting A356-T6 (ASTM F855 8.1)
• 400A continuous current rating
• DISC. Plate
INTEGRITY TOOLS & SAFETY, LLC
Matt Tucker, General Manager1718 Watterson RoadRed Rock, Texas 78662
(512) 718-1208(606) 718-1208 fax
To order, please call the number below.