![Page 1: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/1.jpg)
THERMAL INTERFACE MATERIAL USING CARBON NANOTUBES
Vahab Hassani National Renewable Energy Laboratory [email protected] Tel: 303-275-4427
FY05 Budget: $0K FY06 Budget: $250K
FreedomCAR APEEM Quarterly Program Review Nov. 1-3, 2005
![Page 2: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/2.jpg)
2
Where Does This Project Fit?
• Integrated cooling loop • Inlet coolant at 105 oC for hybrid, 85 oC for FCV • Heat fluxes at the order of up to 250 W/cm2
• Eventually, we would like to do air cooling by FY10 to FY15
Power
Electronics
Electrical
Machines
Thermal
Systems
Wide Band-Gap Mat’ls
High-Temp. Capacitors
Wide Band-Gap Mat’ls
High-Temp.Capacitors
Magnets
Reduce Thermal Resistance
Air Cooling105C and 85C WEG
Increase Heat-Transfer Coefficient
![Page 3: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/3.jpg)
• D
Project Description
evelopment of highly conductive thermal interface materials for
3
maintaining an acceptable operating temperature for power electronics l Silicon chip
Solder
Direct Bond Copper Cu,
Thermal Paste
Base plate, heat sink
Pin finsTB
TH
TCQ heat
AlN, Cu
, Base plate Temp.
, IGBT Temp.
, coolant Temp.
![Page 4: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/4.jpg)
Goals
The goals of this project are:
• Increase the thermal conductivity of the existing thermal interface material by a factor of 6
• Grow carbon nano-tubes on Si or copper substrate
• Produce prototype material for testing
• Develop a nano-thermo foil TIM
4
![Page 5: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/5.jpg)
Technical Approach
• Develop ultra-thin copper-CNT sheets as thermal interface material by synthesizing carbon nanotubes on copper(one side/both sides) using chemical vapor deposition
• Optimize the growth process for the nanothermofoil
• Measure thermal conductance of the nanothermofoil
• Compare the thermal conductance of the nanothermofoil with commercially available products
• Measure the contact resistance at the joint
5
![Page 6: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/6.jpg)
Timeline for FY06
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
Develop ultra-thin cop er-CNT psheets
Optimize the growth process
Measure thermal conductance
Analysis
Measure thermal Mile-
Resistance stone
6
![Page 7: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/7.jpg)
Barriers and Challenges
• Proper growth of carbon nano-tube/distribution
• Optimize the growth process for the nanothermofoil
• Overcoming the impact of contact resistance
7
![Page 8: Thermal Interface material Using Carbon Nanotubes · CARBON NANOTUBES Vahab Hassani National Renewable Energy Laboratory vahab_hassani@nrel.gov Tel: 303-275-4427 FY05 Budget: $0K](https://reader034.vdocuments.site/reader034/viewer/2022043004/5f870e1ae4eab86fcc70e421/html5/thumbnails/8.jpg)
8
• University of Colorado, Boulder
• National Institute of Standards and Technology (NIST)
Interactions and Collaborations