Download - MP Lighting - Product Catalogue 2016
PRODUCT CATALOGUE
2
Contents
10
In-grade 6
Wall Mount 25
Bollard 35
Wine Rack 38
Surface Mount Downlight 40
Recessesd Downlight 45
Linear 49
Cabinet 61
Pendant 67
Spotlight 74
RESOURCES 87
Accessories & Shades 85
Linear Hardware 86
LED Drivers 88
Transformers 92
Technical Information 94
TERMS & CONDITIONS OF SALE 96
WARRANTY 97
101
PRODUCT OVERVIEW 4
3MP LIGHTING PRODUCT CATALOGUE
Lighting is an essential component in designing architectural spaces,
defining how the space will be used and experienced by the people within it.
MP Lighting specializes in manufacturing specification-grade architectural LED fixtures, as
well as Low Voltage, Line Voltage, and Multi-Circuit Track Systems. Established in 1994, MP Lighting is a Canadian owned and operated company with
headquarters in Vancouver, BC. Products are suited for commercial, institutional, industrial, hospitality,
and residential applications.
MP Lighting began with the design of two ceiling mount fixtures and one of the very first cable
systems in Canada. Today, the product line has grown to over 150 products available in numerous
mounting options and systems. MP Lighting's 40,000 sq/ft factory houses two showrooms, a
CSA certification lab, LED testing equipment, and complete production facilities. All products are
designed, tested, and assembled on-site to ensure
quality and performance.
4 MP LIGHTING PRODUCT CATALOGUE
In-grade
PRODUCT OVERVIEW Exterior and interior Submersible No Symbols = Interior use only
Wall Mount
Bollard
Surface Mount Downlight
Wine Rack
L17
L720 L721
L46L22 L47
L91
L49L16
L740-L48
L92 L900 L182A L182B
L05 L08L01 L02 L03 L06 L07
L302 L306L300 L301L09 L303 L304
L401 / L403 L402L130 L131 L134 L600
L352L320 L324 L337
Recessed Downlight
5MP LIGHTING PRODUCT CATALOGUE
Exterior and interior Submersible No Symbols = Interior use only
Cabinet
Linear
Pendant
Spotlight
L51 L52 L57 L64 L65 L66 L500
L72 L73 X02L221 X01 X06
X31 X43X42 X51
L225
X45
L101 L102 L103 L104 L106 L107
L151 L161 L162 L163-L162
L109
P96 (+LED) P97 (+LED) P11
P55
P81 (+LED) P24P02 P12
L191 L192 L195
L501 L550
6 MP LIGHTING PRODUCT CATALOGUE
In-grade
Image shows L300
approx. 280 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.2° 90° Spread: 29.1°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’286
31.8
11.4
7.9
4.5
3.5
Center Beam FC Beam Width
L012.5W, 30°Clear lens3000K Std84 lm
Illuminance at a DistancePolar Candela Distribution
approx. 280 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.2° 90° Spread: 29.1°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’286
31.8
11.4
7.9
4.5
3.5
Center Beam FC Beam Width
L012.5W, 30°Clear lens3000K Std84 lm
Illuminance at a DistancePolar Candela Distribution
Ø2-1/2”(127mm)1/4” concrete
pouring line
1-7/8”(25.4mm)
4-7/8”(123.8mm)
2-3/4”(69.85mm)
sand
Paving stoneflange
3-5/8”(92mm)
5-1/2”(140 mm)
7
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L01 In-grade
1W, 2.5W
Electrical 1W or 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with splice box, aluminum flange and level gauge. Designed to be cast into concrete or inserted into paving stone. Includes 6” wire lead.
Accessories Angle louver or hex louver (see page 85 for details).
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 84 lm 2.5W, 30°, Clear Lens, 3000K std
Code Wattage Color Beam Lens Option angle Bracket* Input Voltage flange Height Base Height finish
L01 - -
1 = 1W 2 = 2.5W
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
C = clearF = frosted
LM = louver, matte anodized
LB = louver, black anodized
HM = hex louver, matte anodized
HB = hex louver, black anodized
0 = no angle 20 = 20° angle X = custom
(30° max.)
A = 12V aC(*12V AC not available for W41S & high CRI )D = dC
S = standard flange 7/8” (22.23mm)
P = paving stone flange, 3-3/8” (85.73mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronzeABZ = antique bronzeS6 = stainless steel 316PB = polished brassAB = antique brass
* Louver is not available with Angle Bracket.
* Internal angle bracket factory set. Cannot be field adjusted.LM LB HBHM
Accessories: (see page 85 for details)
surface of dry wall
flange is positioned1/8” max away from the surface of dry wall
flange
Ø2-1/2”(63.5mm)
1-1/8”(28.6mm)
AngleBracket
1-5/8”(41.3mm)
surface of dry wall
flange is positioned1/8” max away from the surface of dry wall
flange
Ø2-1/2”(63.5mm)
1-1/8”(28.6mm)
AngleBracket
1-5/8”(41.3mm)
approx. 280 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.2° 90° Spread: 29.1°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’286
31.8
11.4
7.9
4.5
3.5
Center Beam FC Beam Width
L012.5W, 30°Clear lens3000K Std84 lm
Illuminance at a DistancePolar Candela Distribution
approx. 280 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.2° 90° Spread: 29.1°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’286
31.8
11.4
7.9
4.5
3.5
Center Beam FC Beam Width
L012.5W, 30°Clear lens3000K Std84 lm
Illuminance at a DistancePolar Candela Distribution
8 MP LIGHTING PRODUCT CATALOGUE8
L02In-grade
1W, 2.5W
Electrical 1W or 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Solid anodized aluminum or stainless steel (316) with 1/4” (6mm) thick tempered glass lens. RoHS compliant.
Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Accessories Angle louver or hex louver (see page 85 for details).
Dimming Dimmable with appropriate remote power supply.
IP 53 (interior)
LM LB HBHM
Accessories: (see page 85 or details)
Delivered Lumens: 84 lm 2.5W, 30°, Clear Lens, 3000K std
speCIfICatIon
Code Wattage Color CrI Beam Lens (Option) angle Bracket* Input Voltage finish
L02 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
C = clearF = frosted
LM = louver, matte anodized
LB = louver, black anodized
HM = hex louver, matte anodized
HB = hex louver, black anodized
0 = no angle 30 = 30° angle45 = 45° angle X = custom (45° max.)
A = 12V aC(12V AC not available in W41S and high CRI)D = dC
MA = matte clear anodizedBA = black anodizedBZ = bronzeABZ = antique bronzeS6 = stainless steel 316W=whitePB= polished brassAB= antique brass
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = 80+standard CrIH = 90+CrI
* Max. 30° angle bracket with louver option.
* Internal angle bracket factory set. Cannot be field adjusted.
1/4”(6.35mm) concrete pouring line
water line
4-3/8”(111.1mm)
Angle
Mounting box with 1/2”(12.7mm) NPT I/O ports
for connector and wiring.
Ø4-1/8”(104.8mm)
approx. 280 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.2° 90° Spread: 29.1°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’286
31.8
11.4
7.9
4.5
3.5
Center Beam FC Beam Width
L012.5W, 30°Clear lens3000K Std84 lm
Illuminance at a DistancePolar Candela Distribution
approx. 280 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.2° 90° Spread: 29.1°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’
4.7’
4.2’
3.1’
2.6’
1.6’
0.5’286
31.8
11.4
7.9
4.5
3.5
Center Beam FC Beam Width
L012.5W, 30°Clear lens3000K Std84 lm
Illuminance at a DistancePolar Candela Distribution
9
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L03Submersible In-grade
1W, 2.5W
Electrical 1W or 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Stainless steel 316 with tempered clear or frosted glass lens.
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete for submersed applications. Up to 12” below water line.
Dimming Dimmable with appropriate remote power supply.
IP 68 (submersible, up to 12” deep below surface)
Delivered Lumens: 84 lm 2.5W, 30°, Clear Lens, 3000K std
LM LB HBHM
Accessories: (see page 85 for details)
Code Wattage Color Beam Lens (Option) angle Bracket* Input Voltage Mounting Lead Length finish
L03 - - S6
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
See BeLOW
(OptIOn)LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte anodizedHB = hex louver, black anodized
0 = no angle 20 = 20° angleX = custom (30° max.)* Max. 30° angle bracket or louver option.
A = 12V aC(12V AC not available in W41S and high CRI)D = dC
B = mounting box
F = flange only
6 = 6’ leadX = custom
S6 = stainless steel 316ABZ = antique bronze
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
Ø3-5/8”(92.1mm)1/4” concrete
pouring line
3”(76mm)
4-7/8”(123.825mm)
4-1/2”(114.3mm)
approx. 830 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.2° 90° Spread: 30.3°
9.0’
8.0’
6.0’
4.0’
2.0’
1.0’
4.9’
4.3’
3.2’
2.2’
1.1’
0.5’
4.9’
4.3’
3.2’
2.2’
1.1’
0.5’826
206.5
51.6
22.9
12.9
9.0
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 30°3000K Std270 lm
Polar Candela Distribution
approx. 830 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.2° 90° Spread: 30.3°
9.0’
8.0’
6.0’
4.0’
2.0’
1.0’
4.9’
4.3’
3.2’
2.2’
1.1’
0.5’
4.9’
4.3’
3.2’
2.2’
1.1’
0.5’826
206.5
51.6
22.9
12.9
9.0
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 30°3000K Std270 lm
Polar Candela Distribution
no base
Code Wattage Color Beam Lens Option angle Bracket* Input Voltage Base Height finish
L05 - -
3 = 3 x 1W
7 = 3 x 2.5W
W27S = 2700K, std CrIW30S = 3000K, std CrI
W35S = 3500K, std CrI
W41S = 4100K, std CrI
W20H = 2000K, high CrI
W30H = 3000K, high CrI* note: W20H has consistent binning that falls within 1.5 MacAdam ellipse.
0 = no angle
30 = 30° angle
MA = matte clear anodized
BA = black anodizedBZ = bronzeS6 = stainless steel
316
S = spot (12°)N = narrow flood
(30°)F= flood (60°)
C = clear
F = frosted
HM = hex louver, matte anodized
HB = hex louver, black anodized
* Louver not available with angle bracket
A = 12V aCD = dC
0 = no base2 = 2” (51mm)6 = 6” (152mm)
* Internal angle bracket factory set. Cannot be field adjusted.
10 MP LIGHTING PRODUCT CATALOGUE
L05In-grade
3W, 7.5W
Electrical 3 x 1W or 3 x 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Solid anodized aluminum or stainless steel (316) with thick tempered glass lens, RoHS compliant., suitable for walk-over and drive-over applications.
Mounting Comes with splice box, aluminum flange and level gauge. Designed to be cast into concrete or inserted into paving stone. Includes 6” wire lead.
Accessories Hex louver (see page 85 for details).
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 270 lm 7W, 30°, Clear Lens, 3000K std
HM HB
Accessories: (see page 85 for details)
speCIfICatIon
approx. 10 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 25° 90° Spread: 24°
1.0’
0.8’
0.7’
0.5’
0.3’
0.2’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’360
90
40
22.5
14.4
10
Center Beam FC Beam Width
L062700K Std1.1 lm
Illuminance at a DistancePolar Candela Distribution
approx. 10 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 25° 90° Spread: 24°
1.0’
0.8’
0.7’
0.5’
0.3’
0.2’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’360
90
40
22.5
14.4
10
Center Beam FC Beam Width
L062700K Std1.1 lm
Illuminance at a DistancePolar Candela Distribution
Ø7/8(22.2mm)
2-1/2”(64mm)
Tile
4-7/8”(123.8mm)
2-3/8”(60.3mm)
Nipple
Concretepouring line
11
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L06In-grade
0.1W
Electrical 0.1W LED powered by remote driver.
Material Stainless steel 316 with tempered glass lens, suitable for walk-over and drive-over applications.
Mounting Can be buried in earth/gravel or cast into concrete with or without mounting box.
Dimming Dimmable with appropriate remote driver.
IP 66 (Exterior/interior)
Delivered Lumens: 2.1 lm 0.1W, 2700K std
no mounting box
with mounting box
Code Color CrI Lens Mounting Box nipple finish
L06 - WWH S - S6
WWH = warm white S = 80+ standard CrI B = with mounting boxN = no mounting box
C = clearF = frosted
2 = 2-1/2” (64mm) minimum4 = 4” (102mm) 8 = 8” (203mm)X = custom length
S6 = stainless steel 316
Ø3/4”(19mm)
1-1/2”(38mm)
approx. 10 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 25° 90° Spread: 24°
1.0’
0.8’
0.7’
0.5’
0.3’
0.2’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’360
90
40
22.5
14.4
10
Center Beam FC Beam Width
L072700K Std1.1 lm
Illuminance at a DistancePolar Candela Distribution
approx. 10 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 25° 90° Spread: 24°
1.0’
0.8’
0.7’
0.5’
0.3’
0.2’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’
0.4’
0.4’
0.3’
0.2’
0.1’
0.1’360
90
40
22.5
14.4
10
Center Beam FC Beam Width
L072700K Std1.1 lm
Illuminance at a DistancePolar Candela Distribution
12 MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L07In-grade
0.1W
Electrical 0.1W LED powered by remote driver.
Material Stainless steel 316. RoHS Compliant.
Mounting Mounts directly into deck flooring.
Dimming Dimmable with appropriate remote driver.
IP 67 (Exterior/interior)
Delivered Lumens: 2.1 lm 0.1W, 3000K std
Code Color Lens finish
L07 - WWH - S6
WWH = warm white C = clearF = frosted
S6 = stainless steel 316
approx. 1.25 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 10.0° 90° Spread: 56.9°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
1.6’
1.4’
1.0’
0.9’
0.5’
0.2’
9.8’
8.7’
6.5’
5.4’
3.3’
1.1’0
0
0
0
0
0
Center Beam FC Beam Width
Illuminance at a DistanceL081W, Double Aperture3000K Std1 lm
Polar Candela Distribution
approx. 1.25 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 10.0° 90° Spread: 56.9°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
1.6’
1.4’
1.0’
0.9’
0.5’
0.2’
9.8’
8.7’
6.5’
5.4’
3.3’
1.1’0
0
0
0
0
0
Center Beam FC Beam Width
Illuminance at a DistanceL081W, Double Aperture3000K Std1 lm
Polar Candela Distribution
surface of dry wall
flange is positioned1/8” max away from the surface of dry wall
flange
Ø2-1/2”(64mm)
1-1/8”(28.6mm)
1-5/8”(41.3mm)
sand
Pavi
ng s
tone
flang
e3-
5/8”
(92m
m)
5-1/
2”(1
40m
m)
sand
Paving stoneflange
3-5/8”(92mm)
5-1/2”(140mm)
Ø2-1/2”(64mm)1/4” concrete
pouring line
2”(51mm)
13
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
Delivered Lumens: 1 lm 1W, double aperture, 3000K std
L08In-grade
1W, 2.5W
Electrical 1W or 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Solid anodized aluminum or stainless steel (316), RoHS compliant.
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
no base
with base
Double apertureSingle aperture
Code Wattage Color aperture Input Voltage* flange Height Base Height finish
L08 - -
1 = 1W 2 = 2.5W
S = singleD = double
A = 12V aC(12V AC not available for W41S & high CRI))D = dC
S = standard flange 7/8” (22.23mm)P = paving stone flange, 3-3/8”(85.73mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316
W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
*Input Voltage AC = 12V AC to LeD. For use with remote
magnetic transformer.DC = DC to LeD. For use with LeD driver.
approx. 1.25 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 10.0° 90° Spread: 56.9°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
1.6’
1.4’
1.0’
0.9’
0.5’
0.2’
9.8’
8.7’
6.5’
5.4’
3.3’
1.1’0
0
0
0
0
0
Center Beam FC Beam Width
Illuminance at a DistanceL091W, Double Aperture3000K Std1 lm
Polar Candela Distribution
approx. 1.25 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 10.0° 90° Spread: 56.9°
9.0’
8.0’
6.0’
5.0’
3.0’
1.0’
1.6’
1.4’
1.0’
0.9’
0.5’
0.2’
9.8’
8.7’
6.5’
5.4’
3.3’
1.1’0
0
0
0
0
0
Center Beam FC Beam Width
Illuminance at a DistanceL091W, Double Aperture3000K Std1 lm
Polar Candela Distribution
surface of dry wall
flange is positioned1/8” max away from the surface of dry wall
flange
Ø2-1/2”(64mm)
1-1/8”(28.6mm)
1-5/8”(41.3mm)
surface of dry wall
flange is positioned1/8” max away from the surface of dry wall
flange
Ø2-1/2”(64mm)
1-1/8”(28.6mm)
1-5/8”(41.3mm)
sand
Pavi
ng s
tone
flang
e3-
5/8”
(92m
m)
5-1/
2”(1
40m
m)
14 MP LIGHTING PRODUCT CATALOGUE14
L09In-grade
1W, 2.5W
Electrical 1W or 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Solid anodized aluminum or stainless steel 316 with tempered glass lens.
Mounting Comes with steel flange which mounts to pre-installed octagonal box.
Dimming Dimmable with appropriate remote power supply.
IP 53 (Interior)
Double apertureSingle aperture
Delivered Lumens: 1 lm 1W, double aperture, 3000K std
speCIfICatIon
Code Wattage Color aperture Input Voltage finish
L09 - -
1 = 1W 2 = 2.5W
S = singleD = double
A = 12V aC(12V AC not available for W41S & high CRI)D = dC
MA = matte clear anodizedBA = black anodizedS6 = stainless steel 316
W27S= 2700K std CrIW30S= 3000K std CrIW35S= 3500K std CrIW41S= 4100K std CrIW20H= 2000K high CrIW30H= 3000K high CrI
Code Wattage Color Beam Lens (Option) angle Bracket* Input Voltage flange Height Base Height finish
L300 - -
1 = 1W 2 = 2.5W
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
See below
(Option)LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte anodizedHB = hex louver, black anodized* Louver cannot be used with Angle Bracket.
0 = no angle 20 = 20° angle X = custom
(30° max.)
* Max. 30° angle bracket without louver option.
A = 12V aC(12V AC not available for W41S & high CRI)D = dC
S = standard flange 7/8” (22.23mm)
P = paving stone flange, 3-3/8” (85.73mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodized
BA = black anodizedBZ = bronzeS6 = stainless steel 316
Shown with standard flange (S)
Base Height
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2”(12.7mm) NPT I/O ports for connector and wiring.
1-1/4”32mm
LM LB HBHM
Accessories: (see page 85 for details)
15MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
15
L300In-grade
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with splice box, aluminum flange and level gauge. Designed to be cast into concrete or inserted into paving stone. Includes 6” wire lead.
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 33 lm 1W, 3000K std, 30°
approx. 120 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.9° 90° Spread: 24.1°
1.6’
3.2’
4.8’
6.4’
8.0’
9.6’
1.3’
2.6’
3.8’
5.1’
6.4’
7.7’0.31
0.45
0.71
1.26
2.83
11.34
Center Beam FC Beam Width
3.0’
6.0’
9.0’
12.0’
15.0’
18.0’
Polar Candela DistributionL3000°, 80+ CRILinear Beam2700K33 lm
Illuminance at a Distance
Code Wattage Color Beam Lens (Option) angle Bracket* Input Voltage finish
L301 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
C = clearF = frosted
LM = louver, matte anodized
LB = louver, black anodized
HM = hex louver, matte anodized
HB = hex louver, black anodized
0 = no angle 30 = 30° angle45 = 45° angle X = custom (45° max.)* Max. 30° angle bracket with louver option.
A = 12V aC(12V AC not available for W41S & high CRI)D = dC
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
Ø1-5/8”Ø41mm
3-1/2”89mm
1”25mm
Ø4-1/8”Ø105mm
1-3/4”44mm
1-3/4”49.5mm
7/8”22mm
Ø2-1/2”Ø64mm
Ø2-1/2”Ø62mm
thicknessor drywallFace ofdrywall
Angle
approx. 114 cd max.
0°
180°
90°
45°
135°
-90°
Polar Candela DistributionL2121W, 80+ CRINarrow Beam3000K33 lm
1 0.5 0.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
Isofootcandle Plot
LM LB HBHM
Accessories: (see page 85 for details)
16 MP LIGHTING PRODUCT CATALOGUE16
L301In-grade
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Dimming Dimmable with appropriate remote power supply.
IP 53 (Interior)
Delivered Lumens: 33 lm 1W, 3000K std, 30°
speCIfICatIon
Base Height
Ø1-5/8”Ø41mm
Standard flange7/8” (22mm)
Ø1-3/4”Ø44mm
Concrete
4-7/8”124mm
2-3/4”70mm
Ø4-1/8”Ø105mm
1-7/16”40mm
Tile
pavingstone
sand
Paving stoneflange3-5/8” (92mm)5-1/2”
140mm
3/4”(19mm) NPT
Shown with standard flange (S)
Code Wattage Color Beam Lens (Option) angle Bracket* Input Voltage flange Height Base Height finish
L302 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
LM = louver, matte anodized
LB = louver, black anodized
HM = hex louver, matte anodized
HB = hex louver, black anodized
0 = no angle 20 = 20° angle X = custom
(30° max.)
A = 12V aC(12V AC not available for W41S & high CRI)D = dC
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodized
BA = black anodizedBZ = bronzeS6 = stainless steel 316
* Max. 30° angle bracket without louver option.
* Louver cannot be used with Angle Bracket.
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
approx. 211cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.3° 90° Spread: 29.2°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.4’
7.8’
6.3’
4.7’
3.1’
1.6’
9.4’
7.8’
6.2’
4.7’
3.1’
1.6’23.4
5.9
2.6
1.5
0.9
0.7
Center Beam FC Beam Width
Illuminance at a DistanceL011W, 30°Clear lens3000K Std61 lm
Polar Candela Distribution
LM LB HBHM
Accessories: (see page 85 for details)
17MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
17
L302In-grade Trimless
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with splice box, aluminum flange and level gauge. Mounts into tile, stone, and deck flooring with or without mounting base..
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 61 lm 1W, 3000K std, 30°
Code Wattage Color Beam Lens Option angle Bracket* Input Voltage finish
L303 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
C = clearF = frosted
LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte
anodizedHB = hex louver,
black anodized
A = 12V aC(12V AC not available for W41S & high CRI)D = dC
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316
0 = no angle 30 = 30° angle45 = 45° angle X = custom (45° max.)* Max. 30° angle bracket with louver option.
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
1-1/8”29mm
Ø4-1/8Ø105mm”
Ø1-7/8”Ø48mm
3-1/2”89mm2”
51mm
Ø1-5/8”Ø41mm
0°
180°
90°
45°
135°
-90°
approx. 179 cd max.-0°
-90°
0.51.0 0.2
0.1 fc
Mount height: 1 ft Total LLF: 1
2 4 6 8 10 120
0
2
2
4
4
6
L021W, 30°Clear lens3000K Std46 lm
Polar Candela Distribution Isofootcandle Plot
LM LB HBHM
Accessories: (see page 85 for details)
18 MP LIGHTING PRODUCT CATALOGUE18
L303In-grade Trimless
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Dimming Dimmable with appropriate remote power supply.
IP 53 (Interior)
Delivered Lumens: 46 lm 1W, 3000K std, 30°
speCIfICatIon
Code Wattage Color Beam Lens (Option) angle Bracket* Input Voltage flange Height Base Height finish
L304 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
0 = no angle 20 = 20° angle X = custom
(20° max.)
A = 12V aC(12V AC not available for W41S & high CRI)D = dC
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodized
BA = black anodizedBZ = bronzeS6 = stainless steel 316
* Max. 20° angle bracket with louver option.
See below
(Option)LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte anodizedHB = hex louver, black anodized* Louver cannot be used with Angle Bracket.
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
approx. 120 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.9° 90° Spread: 24.1°
1.6’
3.2’
4.8’
6.4’
8.0’
9.6’
1.3’
2.6’
3.8’
5.1’
6.4’
7.7’0.31
0.45
0.71
1.26
2.83
11.34
Center Beam FC Beam Width
3.0’
6.0’
9.0’
12.0’
15.0’
18.0’
Polar Candela DistributionL3000°, 80+ CRILinear Beam2700K33 lm
Illuminance at a Distance
Shown with standard flange (S) and optional MK2 mounting base.
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
Standard flange7/8” (22mm)
Sq.2-1/4”Sq.57mm
Concrete pouring line
Base Height
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2”(12.7mm) NPT I/O ports for connector and wiring.
1-7/16”40mm
Sq.7/8”22mm
LM LB HBHM
Accessories: (see page 85 for details)
19MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
19
L304In-grade
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 33 lm 1W, 3000K std, 30°
Base Height
Ø1-5/8”Ø41mm
Standard flange7/8” (22mm)
Ø1-3/4”Ø44mm
Concrete
4-7/8”124mm
2-3/4”70mm
Ø4-1/8”Ø105mm
1-7/16”40mm
Tile
pavingstone
sand
Paving stoneflange3-5/8” (92mm)5-1/2”
140mm
3/4”(19mm) NPT
Shown with standard flange (S)
approx. 120 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.9° 90° Spread: 24.1°
1.6’
3.2’
4.8’
6.4’
8.0’
9.6’
1.3’
2.6’
3.8’
5.1’
6.4’
7.7’0.31
0.45
0.71
1.26
2.83
11.34
Center Beam FC Beam Width
3.0’
6.0’
9.0’
12.0’
15.0’
18.0’
Polar Candela DistributionL3000°, 80+ CRILinear Beam2700K33 lm
Illuminance at a Distance
LM LB HBHM
Accessories: (see page 85 for details)20 MP LIGHTING PRODUCT CATALOGUE20
L306In-grade
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with splice box, aluminum flange and level gauge. Designed to be cast into concrete or inserted into paving stone. Includes 6” wire lead.
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 33 lm 1W, 3000K std, 30°
speCIfICatIon
Code Wattage Color Beam Lens (Option) angle Bracket* Input Voltage** flange Height Base Height finish
L306 - -
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
See below
(Option)LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte anodizedHB = hex louver, black anodized* Louver cannot be used with Angle Bracket.
0 = no angle 20 = 20° angle X = custom (20° max.)
* Max. 20° angle bracket without louver option.
** Input Voltage AC = 12V AC to LED. For use with
remote magnetic transformer.DC = DC to LED. For use with LED
driver.
A = 12V aC(12V AC not available in W41S & high CRI)D = dC
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodized
BA = black anodizedBZ = bronzeS6 = stainless steel 316
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
Shown with standard flange (S)
pavingstone
sand
Paving stoneflange3-3/8” (86mm)5-1/2”
140mm
Base Height
Ø1-5/8”Ø41mm
1/4”6mm
Standard flange7/8” (22mm)
Ø2-3/8”Ø61.9mm
Concrete pouring line
Concrete
4-7/8”124mm
2-3/4”70mm
Ø4-1/8”Ø105mm
1-13/16”45.6mm
Tile
Ø1-5/8”Ø41mm
1-3/4”45.6mm
3/4” NPT
Ø2-3/16”Ø56mm
trim 1/8”
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
3/4”(19mm) NPT
approx. 12 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 4.8° 90° Spread: 55.7°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
1.5’
1.2’
1.0’
0.7’
0.5’
0.2’
19.0’
15.9’
127’
9.5’
6.3’
3.2’1.38
0.35
0.15
0.09
0.06
0.04
Center Beam FC Beam Width
Polar Candela DistributionL3201W, 80+ CRILinear Beam3000K1.8 lm
Illuminance at a Distance
21MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
21
L320In-grade, 5°+60°
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base.
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 1.8lm 1W, 3000K std, 5°+60°
Code Wattage Color CrI Lens Input Voltage flange Height Base Height finish
L320 - -
1 = 1W 2 = 2.5W
C = clearF = frosted
A = 12V aC (12V AC not available for W41S & high CRI)
D = dC
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = 80+standard CrIH = 90+CrI(availble in 2000K and 3000K only)
approx. 12 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 4.8° 90° Spread: 55.7°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
1.5’
1.2’
1.0’
0.7’
0.5’
0.2’
19.0’
15.9’
127’
9.5’
6.3’
3.2’1.38
0.35
0.15
0.09
0.06
0.04
Center Beam FC Beam Width
Polar Candela DistributionL3201W, 80+ CRILinear Beam3000K1.8 lm
Illuminance at a Distance
22 MP LIGHTING PRODUCT CATALOGUE22
L324In-grade, 5°+60°
1W, 2.5W
Electrical 1W, 350mA or 2.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Mounting Can be mounted into floors, walls, ceilings, or other surfaces where a non-obtrusive luminaire is required.
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 1.8 lm 1W, 3000K std, 5°+60°
speCIfICatIon
Code Wattage Color CrI Lens Input Voltage* flange Height Base Height finish
L324 - -
1 = 1W 2 = 2.5W
C = clearF = frosted
A = 12V aC(12V AC not available in W41s & high CRI)D = dC
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = 80+standard CrIH = 90+CrI (not available in 4100K)
*Input Voltage AC = 12V AC to LeD. For use
with remote magnetic transformer.
DC = DC to LeD. For use with LeD driver.
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
Standard flange7/8” (22mm)
Sq.2-1/4”Sq.57mm
Concrete pouring line
Base Height
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2”(12.7mm) NPT I/O ports for connector and wiring.
1-7/16”40mm
Sq.7/8”22mm
Shown with standard flange (S) and optional MK2 mounting base.
23MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
23
L337In-grade
0.2W
Electrical 3.2V, 20mA LED
Material Stainless steel 316, RoHS compliant.
Mounting Recessed mount to ceiling.
Dimming Dimmable with appropriate remote power supply.
IP 67 (Exterior/interior)
Delivered Lumens: 2.1lm 0.2W, Warm White
Code Color CrI Lens finish
L337 - WWH S - S6
S6 = stainless steel 316WWH = warm white
S = 80+standard CrI C = clearF = frosted
Ø7/8”Ø22mm
Ø3/8”Ø9.5mm
1/16”1.6mm
1-3/8”35mm
Ø1/2”Ø12.7mm
approx. 10 cdmax.
180°
0°
90°
45°-45°
-90°
0° Spread: 25° 90° Spread: 24°
0.2’
0.3’
0.5’
0.7’
0.8’
1.0’
0.1’
0.1’
0.2’
0.3’
0.4’
0.4’
0.1’
0.1’
0.2’
0.3’
0.4’
0.4’10.0
14.4
22.5
40.0
90.0
360
Center Beam FC Beam Width
L3372700K Std2.1 lm
Illuminance at a DistancePolar Candela Distribution
approx. 536 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.5°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.5’
7.9’
6.3’
4.7’
3.2’
1.6’59.6
14.9
6.6
3.7
2.4
1.7
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 1W 30°3000K Std173 lm
Polar Candela Distribution
Accessories: (see page 85 for details)24 MP LIGHTING PRODUCT CATALOGUE24
L352In-grade Trimless
3W, 7W
Electrical 3W, 350mA or 7.5W, 700mA LED.
Material Solid anodized aluminum or stainless steel (316) with 3/8”(10mm) thick tempered glass lens, suitable for walk-over and drive-over applications. RoHS compliant.
Mounting Can be mounted into floors, walls, ceilings, or other surfaces where a non-obtrusive luminaire is required.
Dimming Dimmable with appropriate remote power supply.
IP 68 (Exterior/interior)
Delivered Lumens: 173lm 3W, 3000K std,30°
Shown with (Optional) Mounting Base
4-1/2”114mm
3-1/8”79mm
Ø2-3/4”Ø70mm
Ø4-5/8”Ø117mm
6mm1/4”
Concrete pouring line
Base Height
4-7/8”124mm
2-1/2”65mm
Code Wattage Color CrI Beam Lens Option* angle Bracket** Input Voltage Base Height finish
L352 - -
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = 80+standard CrI
H = 90+CrI (not available in 4100K)
S = spot (12°)N = narrow flood (30°)F= flood (60°)
C = clearF = frosted
See below
(Option)HM = hex louver, matte anodizedHB = hex louver, black anodized
0 = no angle30 = 30° angle
A = 12V aCD = dC
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316
3 = 3 x 1W7 = 3 x 2.5W
* Louver not availablewith angle bracket.
**Internal angle bracketfactory set. Cannot befield adjusted.
Input Voltage note:AC = 12V AC to LeD. For use with
remote magnetic transformer.DC = DC to LeD. For use with LeD
driver.
speCIfICatIon
25MP LIGHTING PRODUCT CATALOGUE
WaLL Mount
Image shows L49
1/8”3mm
1-1/8”29mm
3-3/8”86mm
5”127mm
2-1/2”ØØ64mm
2-1/2”64mm
3-1/4”83mm
Shown as Vertical plate
26 MP LIGHTING PRODUCT CATALOGUE
L16Wall Mount
1W, 3W
Electrical DC - LED3W350 (1W) 350mA or LED3W700 (2.5W) 700mA is included.
Material Stainless Steel 316 with tempered glass. RoHS compliant.
Mounting Vertically or horizontally positioned face plate mounts to single gang box (not included). Optimal mounting distance is 18” - 24” (457mm - 610mm) AFF.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 45 lm 1W, 3000K std, Vertical Plate 30˚
speCIfICatIon
Code Wattage Color CrI Beam plate Input Voltage finish
L16 - - S
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
V = verticalH = horizontal
A = 12V aC(12V AC not available in W41S & high CRI)D = dC
S6 = stainless steel 316W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = 80+standard CrIH = 90+CrI
1/8”3mm
1-1/8”29mm
3-3/8”86mm
5”127mm
2-1/2”ØØ64mm
2-1/2”64mm
3-1/4”83mm
Shown as Horizontal plate
approx. 202 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.20.520
0.1 fc
Mount height: 1 ft Total LLF: 1
0
0.5
1
1.5
2
2.5
1 0.5 0 0.5 1 1.5
Isofootcandle PlotPolar Candela DistributionL161W, 30°3000K Std45 lm
1/8”3mm
3-3/8”
5”
1-1/8”29mm
2-1/2”64mm
Ø2-1/2”Ø64mm
86mm
127mm
2-1/2”64mm
3-1/4”83mm
27
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L17Wall Mount
1W, 2.5W
Electrical DC - LED3W350 (2 x 1W) 350mA or LED3W700 (2 x 2.5W) 700mA is included.
Material Stainless steel 316 with tempered glass. RoHS compliant.
Mounting Vertically positioned face plate mounts to a single gang box (not included).
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 115 lm 1W, 3000K std, 30˚
speCIfICatIon
Code Wattage Color (up)* CrI (up) Beam (up) Color (down)* CrI (down) Beam (down) Input Voltage finish
L17 - - S6
1 = 1W 2 = 2.5W
S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
S = spot (12°)N = narrow
flood (30°)
W= wide flood (120°)
A = 12V aC(12V AC not avaliable in W41S & high CRI)D = dC
S6 = stainless steel 316W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = 80+standard CrI
H = 90+CrI
S = 80+standard CrI
H = 90+CrI
* W20 has consistent binning that falls within 1.5 MacAdam ellipse.
approx. 179 cdmax.
0°
180°
90°
45°-45°
-90°
-0°
-90°
0.21.020
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL191W, 30°3000K Std115 lm
approx. 3.2 cdmax.
-0°
-90°
0°
180°
90°
45°
135°
-90°
0.2
0.5
1 0.1 fc
Mount height: 1 ft Total LLF: 0.69
2
1
0
1
2
0 1 2 3 4
Isofootcandle PlotPolar Candela DistributionL222.5W3000K Std24 lm
approx. 3.2 cdmax.
-0°
-90°
0°
180°
90°
45°
135°
-90°
0.2
0.5
1 0.1 fc
Mount height: 1 ft Total LLF: 0.69
2
1
0
1
2
0 1 2 3 4
Isofootcandle PlotPolar Candela DistributionL222.5W3000K Std24 lm
3-1/2” Ø4-5/8”Ø117mm
Ø2-1/2”Ø64mm
19mm
89mm
3/4”
1/4”6mm1-3/4”
44mm
3-1/2” Ø4-5/8”Ø117mm
Ø2-1/2”Ø64mm
19mm
89mm
3/4”
1/4”6mm1-3/4”
44mm
28 MP LIGHTING PRODUCT CATALOGUE
L22Wall Mount
1W, 2.5W
Electrical 1W or 2.5W LED powered by non-dimmable integral DC driver or remote 12V AC magnetic transformer.
Material Stainless steel 303 with polycarbonate lens.
Mounting Mounts to octagonal box.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 24 lm 2.5W, 3000K std
speCIfICatIon
Code Wattage Color Lens Input Voltage finish
L22 - F - S3
1 = 1W 2 = 2.5W
F = frosted A = 12V aC(not available with 3500K)D = dC
S3= stainless steel 303W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
note: W20 has consistent binning that falls within 1.5 MacAdam ellipse.
approx. 40 cdmax.
-0°
-90°
0°
180°
90°
45°
135°
-90°
Mount height: 1 ft Total LLF: 1
432
10123
4
0 1 2 3 4 5 6 7 8
10 1 0.5 0.1 fc
Isofootcandle PlotPolar Candela DistributionL466W3000K Std53 lm approx.
40 cdmax.
-0°
-90°
0°
180°
90°
45°
135°
-90°
Mount height: 1 ft Total LLF: 1
432
10123
4
0 1 2 3 4 5 6 7 8
10 1 0.5 0.1 fc
Isofootcandle PlotPolar Candela DistributionL466W3000K Std53 lm
5”(127mm)3/8”(9.5mm)
3-3/8”(85.7mm)
3-3/8”(85.7mm)
3/8”(9.5mm)
5”(127mm)
29
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
note: SWC & CCA finishes are only exclusively for L47
L46, L47 Wall Mount
3W, 6W
Electrical 3W or 6W LED powered by non-dimmable integral driver or remote 12V AC magnetic transformer.
Material Solid anodized aluminum or stainless steel 316 with polycarbonate lens.
Mounting L46 mounts to single gang box. L47 mounts to single gang box.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
L46
L47
Engraving available upon request.
Delivered Lumens: 53 lm 6W, 3000K std
Code Wattage Color Input Voltage finish
L46/L47 - -
3 = 3W6 = 6W
MA = matte clear anodizedBK = blackBZ = bronzeS6 = stainless steel 316WH = whiteSWC = sky white antimicrobialCCA= crystal clear antimicrobial
W27S = 2700K, std CrIW30S = 3000K, std CrI
A = 12V aCD = dC
speCIfICatIon
30 MP LIGHTING PRODUCT CATALOGUE
L49Wall Mount
6W
Electrical 6 x 1W, 350mA LEDs. Powered by integral 120V/ 277V primary, 350mA dimmable LED driver.
Material Solid anodized aluminum or stainless steel 316 with polycarbonate lens.
Mounting Surface or recessed mount to 3-1/2” deep x 7-3/8” wide x 3-3/4” high, 4 gang masonry box (Included). Can also be used with standard box (ex. Iberville, CIMBD-4-K)
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 141lm 6W, 3000K std
Code Wattage dimming Color Beam tilt (Option)** Input Voltage finish
L49 - 6 -
0 = 0°15 = 15°30 = 30°45 = 45°
6 = 6W D = 1~10VP = phase
W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW30H = 3000K, high CrI
S = spot (12°)N = narrow flood (30°)F = flood (60°)W= wide flood (120°)E= elliptical (17°+46°)
A = 12V aCD = dC
**preset at 30° tilt, field adjustable. Custom angle available, 45° max, please specify
MA = matte clear anodizedBK = blackBZ = bronzeS6 = stainless steel 316WH = white
9-3/4”248mm
4-7/8”124mm
5/8”16mm
3-3/4”95mm
Tiltable angle
approx. 709 cdmax.
0° 45°
180° 135°
90°
90°-90°
Polar Candela DistributionL4930°, 80+ CRINarrow Flood3000K141 lm
-0°
-90°
0.2 fc1
Mount height: 1 ft Total LLF: 1
012
34567
8
4 3 2 1 0 1 2 3 4
205
Isofootcandle Plot
speCIfICatIon
31
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L91Wall Mount
2.5W
Electrical 2.5W, 700mA LED. Powered by integral 120V primary, 3W 700mA non-dimmable driver.
Material Anodized aluminum, insert trim with 1/4” (6mm) thick tempered glass lens. RoHS compliant.
Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2”/ 38mm minimum depth). Can be positioned facing up or down.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 86lm 2.5W, 3000K std
3-7/8”
3-3/8”
3-1/4”
4-1/2” Sq.
86mm
98mm 114mm Sq.
83mmØ2-5/8”Ø67mm
Code Wattage Color Beam Lens Angle Bracket Input Voltage finish
L91 - 2 -
0 = no angle30 = 30° angleX = custom (30° max)
2 = 2.5W W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW30H = 3000K, high CrI
S = spot (12°)N = narrow flood (30°)W = flood (120°)
A = 12V aCD = dC
MA = matte clear anodizedWH = white
C = clearF = frosted
approx. 220 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.1 fc
205
2.5
Mount height: 3 ft Total LLF: 1
2
1
1
0
2
1 0 1
Isofootcandle PlotPolar Candela DistributionL9130°, clear lens3000K Std86 lm
32 MP LIGHTING PRODUCT CATALOGUE
L720 Wall Mount
16W
Electrical 16W, 12 VAC. Integral magnetic transformer bring 120V to fixture.
Material Anodized aluminum. RoHS compliant.
Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2”/ 38mm minimum depth).
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 646lm 16W, 3000K, 30˚
speCIfICatIon
Ø4”102mm
8-1/2”216mm
3-1/2”89mm
2-7/8”73mm
Ø5-3/8”138mm
approx. 823 cdmax.
0°
180°
90°
45°-45°
-90°
90° Spread: 30.6°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.8’
8.2’
6.6’
4.9’
3.3’
1.6’90.5
22.6
10.1
5.7
3.6
2.5
Center Beam FC Beam Width
Polar Candela DistributionL2113000K 80+CRINarrow Flood2700K646 lm
Illuminance at a Distance
Code Wattage CoLor BeaM (Up) Lens (Up) BeaM (DOWn) Lens (DOWn) fInIsH
L720 - 16 - MA
16 = 16W S = spot (12°)N = narrow flood (30°)F= flood (40°)
C = clearF = frosted
MA = matte clear anodizedW20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = spot (12°)N = narrow flood (30°)F= flood (40°)
C = clearF = frosted
33
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L721Wall Mount
8W
Electrical 8W, 12VAC. Integral magnetic transformer bring 120V to fixture.
Material Anodized aluminum, insert trim with 1/4” (6mm) thick tempered glass lens. RoHS compliant.
Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2”/ 38mm minimum depth). Can be positioned facing up or down.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 323lm 8W, 3000K, 30˚
Code Wattage Color Beam Lens finish
L721 - 8 - MA
8 = 8W S = spot (12°)N = narrow flood (30°)F= flood (40°)
C = clearF = frosted
MA = matte clear anodizedW20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
Ø4”Ø102mm
4-7/8”124mm
4-7/8”124mm
3-1/2”89mm
2-7/8”73mm 2-7/8”
73mm
3-1/2”89mm
Ø4”Ø102mm
4-7/8”124mm
Ø5-3/8”138mm
Ø4”Ø102mm
4-7/8”124mm
4-7/8”124mm
3-1/2”89mm
2-7/8”73mm 2-7/8”
73mm
3-1/2”89mm
Ø4”Ø102mm
4-7/8”124mm
Ø5-3/8”138mm
approx. 816 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.9°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.9’
8.3’
6.6’
5.0’
3.3’
1.7’90.7
22.7
10.1
5.7
3.6
2.5
Center Beam FC Beam Width
Polar Candela DistributionL7213000K, 80+CRINarrow Beam
323 lm
Illuminance at a Distance
speCIfICatIon
34 MP LIGHTING PRODUCT CATALOGUE
L740-L48Wall Mount
3W, 6W
Electrical 3W, 350mA or 6W, 700mA LED. *comes with integral driver
Material Solid anodized aluminum . RoHS compliant.
Mounting Mounts to single gang box or octagan junction box. Box opening must be 2 3/8” wide by 2” tall by 1 1/2” depth minimum. (Junction box not included)
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 323lm 8W, 3000K, 30˚
approx. 816 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.9°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.9’
8.3’
6.6’
5.0’
3.3’
1.7’90.7
22.7
10.1
5.7
3.6
2.5
Center Beam FC Beam Width
Polar Candela DistributionL7213000K, 80+CRINarrow Beam
323 lm
Illuminance at a Distance
Code Wattage Color Input Voltage finish
L740-L48 – –
3 = 3W 6 = 6W
A = 12V aCD = dC
MA = matte clear anodizedBK = blackWH = whiteBZ = bronze
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
speCIfICatIon
5 1/8 in130 mm
5/8 in16 mm
3 1/4 in83 mm
3 1/4 in83 mm
3/8 in8 mm
3/8 in11 mm
1 1/4 in32 mm
1 3/4 in43 mm
1 3/4 in43 mm
3 1/4 in83 mm
3 1/2 in89 mm
35MP LIGHTING PRODUCT CATALOGUE
BoLLard
Image shows L92
approx. 220 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.1 fc
205
2.5
Mount height: 3 ft Total LLF: 1
2
1
1
0
2
1 0 1
Isofootcandle PlotPolar Candela DistributionL9230°, clear lens3000K Std86 lm
approx. 220 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.1 fc
205
2.5
Mount height: 3 ft Total LLF: 1
2
1
1
0
2
1 0 1
Isofootcandle PlotPolar Candela DistributionL9230°, clear lens3000K Std86 lm
Post Height
3-7/8”(98.4mm)
7-3/8”(187.3mm)
Ø2-5/8”(66.7mm)
6” Sq.(152.4mm)
36 MP LIGHTING PRODUCT CATALOGUE
L92Bollard
2.5W
Electrical 2.5W LED powered by non-dimmable integral DC driver or remote 12V AC magnetic transformer.
Material Anodized aluminum.
Mounting Mounts to 24”, 36” or 48” aluminum post.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
Delivered Lumens: 86 lm 2.5W, 30°, clear lens, 3000K std
speCIfICatIon
Code Wattage Color Beam Lens angle Bracket Input Volatge post Height (H) finish
L92 - 2 -
2 = 2.5W C = clear
F = frosted
A = 12V AV
D = DC0 = no angle
30 = 30° angle
X = custom
(30° max.)
24 = 24” (610mm)
36 = 36” (914mm)
48 = 48” (1219mm)
MA = matte clear anodized
WH = white
W20S = 2000K, std CrI
W27S = 2700K, std CrI
W30S = 3000K, std CrI
W35S = 3500K, std CrI
W41S = 4100K, std CrIW20H = 2000K, high CrI
W27H = 2700K, high CrI
W30H = 3000K, high CrI
W35H = 3500K, high CrI
S = spot (12°)
N = narrow flood (30°)
W = wide flood (120°)
Ø4”(102mm)
7”(178mm)
4-7/8”(124mm)
38”(
965m
m)
Post
Hei
ght
6”sq(152mm sq)
4-1/2”(114mm)
approx. 798 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 18.5° 90° Spread: 31.0°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
5.9’
4.9’
3.9’
2.9’
2.0’
1.0’
10.0’
8.3’
6.7’
5.0’
3.3’
1.7’66.1
16.5
7.3
4.1
2.6
1.8
Center Beam FC Beam Width
Polar Candela DistributionL90030°, 80+ CRINarrow Beam3000K306 lm
Illuminance at a Distance
37
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L900Bollard
8W
Electrical Integral magnetic transformer bring 120V to fixture. On and off only.
Material Anodized aluminum. RoHS compliant.
Mounting Mounts to 24”(610mm) / 36”(614mm) / 48”(1219mm) anodized aluminum post.
IP 66 (Exterior/interior)
Delivered Lumens: 306 lm 8W, 30°, clear lens, 3000K std
Code Wattage Color reflector reflector Color Lens post Height finish
L900 - 8 -
8 = 8W S = spot (10°)N = narrow flood (30°)F= flood (40°)
S = silver specularB = black specular
C = clearF = frosted
MA = matte clear anodized24 = 24” (610mm)36 = 36” (914mm)48 = 48” (1219mm)
W20S = 2000K, std CrI
W27S = 2700K, std CrI
W30S = 3000K, std CrI
W35S = 3500K, std CrI
W41S = 4100K, std CrI
W20H = 2000K, high CrI
W27H = 2700K, high CrI
W30H = 3000K, high CrI
W35H = 3500K, high CrI
speCIfICatIon
WIne raCK
Image shows L182MP LIGHTING PRODUCT CATALOGUE38
approx. 22 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 96.8° 90° Spread: 94.2°
1.0’
0.8’
0.7’
0.5’
0.3’
0.2’
2.3’
1.9’
1.5’
1.1’
0.8’
0.4’
2.2’
1.8’
1.4’
1.1’
0.7’
0.4’774.9
193.7
86.1
48.4
31.0
21.5
Center Beam FC Beam Width
Illuminance at a DistanceL182T120°3000K Std58 lm
Polar Candela Distribution
approx. 22 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 96.8° 90° Spread: 94.2°
1.0’
0.8’
0.7’
0.5’
0.3’
0.2’
2.3’
1.9’
1.5’
1.1’
0.8’
0.4’
2.2’
1.8’
1.4’
1.1’
0.7’
0.4’774.9
193.7
86.1
48.4
31.0
21.5
Center Beam FC Beam Width
Illuminance at a DistanceL182T120°3000K Std58 lm
Polar Candela Distribution
39MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L182Wine Rack
1W
Electrical 1W LED per arm powered by remote DC driver or 12V AC magnetic transformer.
Material Black anodized aluminum.
Mounting Mounts to wall or mounts freely from ceiling to floor.
Accessories Full shroud or half shroud (see page 85 for details).
Dimming Dimmable with appropriate remote power supply.
IP 40 (Interior)
Delivered Lumens: 58 lm 1W, 120°, NA, 3000K std
1-1/4”32mm
1-1/4”32mm
adjustable**
adjustable
middle arm module
custom length mounting rail
top arm module
botton arm module
9-1/4”235mm
1”25mm
5-7/8”149mm
3-1/2”89mm
1-1/4”32mm
1-3/8”35mm
3/4”19mm
8”203mm
(one bottle)
(two bottles)
1-1/4”32mm
1-1/4”32mm
adjustable**
adjustable
middle arm module
custom length mounting rail
top arm module
botton arm module
9-1/4”235mm
1”25mm
5-7/8”149mm
3-1/2”89mm
1-1/4”32mm
1-3/8”35mm
3/4”19mm
8”203mm
(one bottle)
(two bottles)
1-1/4”32mm
1-1/4”32mm
adjustable**
adjustable
middle arm module
custom length mounting rail
top arm module
botton arm module
9-1/4”235mm
1”25mm
5-7/8”149mm
3-1/2”89mm
1-1/4”32mm
1-3/8”35mm
3/4”19mm
8”203mm
(one bottle)
(two bottles)
BA = black anodized
BA = black anodized BA = black
anodized
Top Arm Module has LED and no cross bars.
CODE COLOR BEAM ACCESSORIES INpuT VOLTAgE FINISH
L182T - - BA
top arm
CODE LENgTH ACCESSORIES FINISH
RAL182 - WR-MB - BA
Rail comes with rubber cover.
rail
CODE COLOR BEAM ACCESSORIES INpuT VOLTAgE CROSS BAR FINISH
L182M - - BA
Middle Arm Module has LED and cross bars.
middle arm
CODE CROSS BAR FINISH
L182B - - BA
Bottom Arm Module has cross bars and no LED.
bottom arm
X = custom by footS = spot (12°)N = narrow flood (30°)W = wide flood (120°)
A = 12V ACD = DC
NA = no accessoryFS = full shroudHS = half shroud
1A = single neck view2A = double neck view1B = single front view2B = double front view
1A = single neck view2A = double neck view1B = single front view2B = double front view
W27S = 2700K, std CRIW30S = 3000K, std CRIW20H = 2000K, high CRIW30H = 3000K, high CRI
W27S = 2700K, std CRIW30S = 3000K, std CRIW20H = 2000K, high CRIW30H = 3000K, high CRI
S = spot (12°)N = narrow flood (30°)W = wide flood (120°)
A = 12V ACD = DC
NA = no accessoryFS = full shroudHS = half shroud
BA = black anodized
WR-MB = wine rack mounting bracket
Double neck view
Double front view
Single neck viewL182M-1A Middle arm moduleL182B-1A Bottom arm module
L182M-1B Middle arm moduleL182B-1B Bottom arm module
L182M-2A Middle arm moduleL182B-2A Bottom arm module
L182M-2B Middle arm moduleL182B-1B Bottom arm module
Single front view
Cross Bar Options Mounting Bracket
(maximum 9ft or 2.74m in length recommended)
Mounting BracketWR- MB
(To mount freely from ceiling to floor, mounting brackets must be
installed on both ends of rail)
40 MP LIGHTING PRODUCT CATALOGUE
surfaCe Mount doWnLIgHt
Image shows L134
approx. 920 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 31.3° 90° Spread: 31.3°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’102.3
25.6
11.4
6.4
4.1
2.8
Center Beam FC Beam Width
Polar Candela DistributionL13030°3000K Std266 lm
Illuminance at a Distance
approx. 920 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 31.3° 90° Spread: 31.3°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’102.3
25.6
11.4
6.4
4.1
2.8
Center Beam FC Beam Width
Polar Candela DistributionL13030°3000K Std266 lm
Illuminance at a Distance
Ø4-3/4”3/4”
3-1/2”89mm
Ø121mm19mm
41MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L130Surface Mount Downlight
7.5W
Electrical 3 x 2.5W LEDs powered by DC driver (included) or 12V AC magnetic transformer (not included).
Material Anodized aluminum.
Mounting Mounts to octagonal box (not included).
Dimming Dimmable with appropriate remote power supply.
IP 40 (Interior)
Delivered Lumens: 266 lm 7.5W, 30°, 3000K std
Code Wattage Color Beam Input Voltage Finish
L130 - 7 -
7 = 3 x 2.5W MA = matte clear anodizedBA = black anodizedWH = white
30 = 30° beam60 = 60° beam
A = 12V ACD = DC
W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW27H = 2700K, high CrIW20H = 2000K, high CrIW30H = 3000K, high CrI
Note: Standard CRI has a value or 75~82.
speCIfICatIon
approx. 920 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 31.3° 90° Spread: 31.3°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’102.3
25.6
11.4
6.4
4.1
2.8
Center Beam FC Beam Width
Polar Candela DistributionL13130°3000K Std266 lm
Illuminance at a Distance
approx. 920 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 31.3° 90° Spread: 31.3°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’
9.6’
8.0’
6.4’
4.8’
3.2’
1.6’102.3
25.6
11.4
6.4
4.1
2.8
Center Beam FC Beam Width
Polar Candela DistributionL13130°3000K Std266 lm
Illuminance at a Distance
speCIfICatIon
Ø4-3/4”3/4”
3-1/2”89mm
Ø121mm19mm
42 MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L131 Surface Mount Downlight
7.5W
Electrical 3 x 2.5W LEDs powered by DC driver (included) or 12V AC magnetic transformer (not included).
Material Anodized aluminum.
Mounting Mounts to octagonal box (not included).
Dimming Dimmable with appropriate remote power supply.
IP 44 (Damp / Dry)
Delivered Lumens: 266 lm 7.5W, 30°, 3000K std
Code Wattage Color Beam Input Voltage Finish
L131 - 7 -
7 = 3 x 2.5W MA = matte clear anodizedBA = black anodizedWH = white
30 = 30° beam60 = 60° beam
A = 12V ACD = DC
W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRIW27H = 2700K, high CRIW20H = 2000K, high CRIW30H = 3000K, high CRI
Note: Standard CRI has a value or 75~82.
speCIfICatIon
approx. 1190 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.6° 90° Spread: 30.7°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.9’
8.2’
6.6’
4.9’
3.3’
1.6’
9.9’
8.2’
6.6’
4.9’
3.3’
1.6’131.2
32.8
14.6
8.2
5.2
3.6
Center Beam FC Beam Width
Polar Candela DistributionL1344 x 2.5W, 30°3000K StdNA396 lm
Illuminance at a Distance
approx. 1190 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.6° 90° Spread: 30.7°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.9’
8.2’
6.6’
4.9’
3.3’
1.6’
9.9’
8.2’
6.6’
4.9’
3.3’
1.6’131.2
32.8
14.6
8.2
5.2
3.6
Center Beam FC Beam Width
Polar Candela DistributionL1344 x 2.5W, 30°3000K StdNA396 lm
Illuminance at a Distance
6-3/4” Sq.171mm Sq.
1-1/8”29mm
2-1/8” Sq.54mm Sq.
3/8”10mm
Shown with no accessory
Shown with black cross baffle (CB) used to reduce glare.
Code Wattage Color Beam Input Voltage Accessories* Finish
L134 - 10 -
10 = 4 x 2.5W MA = matte clear anodizedBA = black anodizedWH = white
NA = no accessoryCB1 = cross baffle, black
30 = 30° beam60 = 60° beam
Note: W20 has consistent binning that falls within 1.5 MacAdam ellipse.
W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRIW20H = 2000K, high CRIW30H = 3000K, high CRI
*Accessories sold separately.
*See page 85 for detail
1 = 120V2 = 277V
(NA)
speCIfICatIon
43
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L134 Surface Mount Downlight
10W
Electrical 4 x 2.5W LEDs powered by non-dimmable integral driver.
Material Anodized aluminum.
Mounting Mounts to standard electrical box.
Dimming Dimmable with appropriate remote driver.
IP 44 (Damp / Dry)
Delivered Lumens: 396 lm 10W, 30°, 3000K std
Ø4-5/8”Ø117mm
4-3/8”111mm
ceiling
7/8”22mm
2-1/2”64mm
approx. 2660 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.5°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.8’
8.2’
6.6’
4.9’
3.3’
1.6’295.6
73.9
32.8
18.5
11.8
8.2
Center Beam FC Beam Width
Polar Candela DistributionL60080+CRI Silver specular3000K1044 lm
Illuminance at a Distance
speCIfICatIon
1 = 120V2 = 277V
** Input Voltage
1= 120V Input integral driver. phase dimmable.
2= 120–277V Universal input voltage. 0–10V dimmable.
*See below for CRI & Beam option
*
Code pendant Mount Wattage CoLor CrI BeaM refLeCtor CoLor Input Voltage steM LengtH finish
L600 - 13 -
C9= Ø6-5/16”(160mm) x 2-3/8”(60mm) canopy
C3 = Ø4-5/8”(117mm) x 1/4”(6.33mm) canopy
C4= Ø4-5/8”(117mm) x 1/4”(6.33mm) canopy
C7= Ø6-3/8”(161mm) x 2-3/8”(60mm) canopy
N=noneS=stemCA=cable
S6 = 6” (152mm) stemSX = custom stem*C72 = 72” (1829mm)
cordCX = custom cord*
MA = matte clear anodizedBA = black anodizedBZ = bronzeWH = white
* available in 1”(25.4mm)increments up to 8ft max.(2.4m)
13 = 13W
S = spot (10°)N = narrow flood (30°)F = flood (40°)
S = silver specularB = black specular
W20 = 2000K W27 = 2700KW30 = 3000K,W35 = 3500K
S = 80+ standard CrIV = 97+ CrI X = Xicato artist, 97 high CrI
44 MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L600 Surface Mount Downlight
13W
Electrical 13W, 350mA (Standard)
Material Anodized aluminum.
Mounting See separate installation instruction sheet.
Dimming Dimmable with appropriate remote driver.
IP 42 (Dry / Damp)
Delivered Lumens: 1044 lm 13W, 30°, 3000K std
L600 without pendent option
speCIfICatIon
45MP LIGHTING PRODUCT CATALOGUE
reCessed doWnLIgHt
Image shows L402
speCIfICatIon
17-5/8”448mm
13-1/8”333mm
Ø4-7/8”Ø124mm
Ø3-1/8”Ø79mm
10-1/8”257mm
3-1/8”80mm
3-7/8”98mm
5/8”16mm
Dry wall
13-1/8”333mm
17-5/8”448mm
10-1/8”257mm
Ø4-7/8”Ø124mm
Ø3-1/8”Ø79mm
5-1/2”140mm
46 MP LIGHTING PRODUCT CATALOGUE
L401Recessed Downlight
13W
Electrical 13W LED powered by integral 120V AC or 277V AC input dimmable or non-dimmable DC driver.
Material Aluminum.
Mounting Mounts into insulated ceiling box, recessed mount non-insulated version to ceiling with spring clip or retrofit.
Ceiling Cutout Size Ø4”
Dimming 0~10V (120V~277V), Triac (120V), Lutron, DMX, DALI.
IP 42 (Dry / Damp)
Non-insulatedInsulated
Delivered Lumens: 932 lm 13W, high lumen, 30°, 2700K std, silver reflector
Code Housing dimming Color CrI reflector reflector Color Input Voltage finish
L401 - -
IC = insulatedNI = non-insulated
D = dimmable, 0~10VT = dimmable, phaseLU = dimmable, LutronM = dMX (remote only)L = daLI (remote only)
W27 = 2700KW30 = 3000KW35 = 3500K
S = 80+ standard CrIV = 97 high CrI (only available in 2700K and 3000K)X = Xicato artist, 97CrISOR = soraa, 97CrI (not available in 3500K)
S = silver specularB = black specular
1 = 120V2 = 277V3= 347V
W = whiteB = black
* Contact factory for Xicato and Soraa options.
S = spot (10°)N = narrow
flood (30°)F = flood (40°)
approx. 2,140 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 32.6° 90° Spread: 32.1°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
10.5’
8.8’
7.0’
5.3’
3.5’
1.8’
10.3’
8.6’
6.9’
5.2’
3.4’
1.7’237.7
59.4
26.4
14.9
9.5
6.6
Center Beam FC Beam Width
Polar Candela DistributionL401Z30°, 80+CRI Silver specular2700K932 lm
Illuminance at a Distance
speCIfICatIon speCIfICatIon
4-7/8”124mm
Ø4-7/8”Ø124mm
10”254mm
13”330mm
17-5/8”448mm
3-7/8”98mm
70°
360°70°
360°
5-1/2”140mm4-7/8”
124mm
6-1/8”156mm
Ø4-7/8”Ø124mm
13-1/8”333mm
10”254mm
13-1/8”333mm
17-5/8”448mm
10-1/8”257mm
Ø4-7/8”Ø124mm
Ø3-1/8”Ø79mm
5-1/2”140mm
47
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L402Adjustable Recessed Downlight
13W
Electrical 13W LED powered by integral 120V AC or 277V AC input dimmable or non-dimmable DC driver.
Material Aluminum.
Mounting Mounts into insulated ceiling box, recessed mount non-insulated version to ceiling with spring clip or retrofit.
Ceiling Cutout Size Ø4”
Dimming 0~10V (120V~277V), Triac (120V), Lutron, DMX, DALI.
IP 42 (Dry / Damp)
Non-insulatedInsulated
Delivered Lumens: 932 lm 13W, high lumen, 30°, 2700K std, silver reflector
Code Housing dimming Color CrI reflector reflector Color Input Voltage finish
L402 - -
IC = insulatedNI = non-insulated
D = dimmable, 0~10VT = dimmable, phaseLU = dimmable, LutronM = dMX (remote only)L = daLI (remote only)
W27 = 2700KW30 = 3000KW35 = 3500K
S = 80+ standard CrIV = 97 high CrI (only available in 2700K and 3000K)X = Xicato artist, 97CrISOR = soraa, 97CrI (not available in 3500K)
S = silver specularB = black specular
1 = 120V2 = 277V3= 347V
W = whiteB = black
* Contact factory for Xicato and Soraa options.
S = spot (10°)N = narrow
flood (30°)F = flood (40°)
approx. 2,140 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 32.6° 90° Spread: 32.1°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
10.5’
8.8’
7.0’
5.3’
3.5’
1.8’
10.3’
8.6’
6.9’
5.2’
3.4’
1.7’237.7
59.4
26.4
14.9
9.5
6.6
Center Beam FC Beam Width
Polar Candela DistributionL401Z30°, 80+CRI Silver specular2700K932 lm
Illuminance at a Distance
17-5/8”448mm
13-1/8”333mm
Ø4-7/8”Ø124mm
Ø3-1/8”Ø79mm
10-1/8”257mm
3-1/8”80mm
3-7/8”98mm
5/8”16mm
Dry wall
13-1/8”333mm
17-5/8”448mm
10-1/8”257mm
Ø4-7/8”Ø124mm
Ø3-1/8”Ø79mm
5-1/2”140mm
speCIfICatIon
48 MP LIGHTING PRODUCT CATALOGUE
L40326W Recessed Downlight with Zhaga Compliant LED Source
26W
Electrical 26W LED powered by integral 120V AC or 277V AC input dimmable or non-dimmable DC driver.
Material Aluminum.
Mounting Mounts into insulated ceiling box, recessed mount non-insulated version to ceiling with spring clip or retrofit.
Ceiling Cutout Size Ø4”
Dimming 0~10V (120V~277V), Triac (120V), Lutron, DMX, DALI.
IP 42 (Dry / Damp)
Non-insulatedInsulated
Delivered Lumens: 1466 lm 26W, high lumen, 30°, 2700K std, silver reflector
Code Housing Wattage dimming Color CrI reflector reflector Color Input Voltage finish
L403 - 2 -
2 = 26W (17W forXicato Artist)
IC = insulatedNI = non-insulated
D = dimmable, 0~10VT = dimmable, phaseLU = dimmable, LutronM = dMX (remote only)L = daLI (remote only)
W27 = 2700KW30 = 3000KW35 = 3500K
S = 80+ standard CrIV = 97 high CrI**only available in 2700K and 3000KX = Xicato artist,
97 high CrI
S = silver specularB = black specular
1 = 120V2 = 277V
W = whiteB = black
S = spot (15°)N = narrow
flood (30°)F = flood (40°)
approx. 2,140 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 32.6° 90° Spread: 32.1°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
10.5’
8.8’
7.0’
5.3’
3.5’
1.8’
10.3’
8.6’
6.9’
5.2’
3.4’
1.7’237.7
59.4
26.4
14.9
9.5
6.6
Center Beam FC Beam Width
Polar Candela DistributionL401Z30°, 80+CRI Silver specular2700K932 lm
Illuminance at a Distance
49MP LIGHTING PRODUCT CATALOGUE
LINEAR
Image shows L109
approx. 250 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
30.4’
23.6’
20.3’
13.5’
10.1’
3.4’
30.4’
23.6’
20.2’
13.5’
10.1’
3.4’249.5
27.7
15.6
6.9
5.1
3.1
Center Beam FC Beam Width
0° Spread: 118.7° 90° Spread: 118.7°
L1014’ LengthS3 Spacing120°Flat Frosted3000K Std763 lm
Polar Candela Distribution Illuminance at a Distance
approx. 250 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
30.4’
23.6’
20.3’
13.5’
10.1’
3.4’
30.4’
23.6’
20.2’
13.5’
10.1’
3.4’249.5
27.7
15.6
6.9
5.1
3.1
Center Beam FC Beam Width
0° Spread: 118.7° 90° Spread: 118.7°
L1014’ LengthS3 Spacing120°Flat Frosted3000K Std763 lm
Polar Candela Distribution Illuminance at a Distance
Code Code Length spacing** Color CrI Beam Lens Input Voltage finish
L101 - W -
N = no angleA = 45° angle
X = custom* S2 = 2” (52mm)S3 = 3” (76mm)**between LeDs
* DC: Minimum 1’ long (305mm), 6” (152.4mm) increments up to 8’ (2438mm) max
* AC: 1’ (305mm) increments. 4’ (1219mm) max.
nOte:S2 = 12’(3658mm) max. per 100W24V driverS3 = 18’(5486mm) max. per 100W24V driverW20 has consistent binning that falls within 1.5 MacAdam ellipse.
W20S = 2000KW27S = 2700KW30S = 3000KW35S = 3500KW41S= 4100K
S = 80+std CrIH = 90+high CrI
(not available in W41S)
W = wide flood (120°)
T = flat clearF = flat frostedC = convex clear
A = 12V aC*only available in increments of 1ft (305mm)D = dC*only available in increments of 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronze
50 MP LIGHTING PRODUCT CATALOGUE
L101 Linear
4W/ft, 6W/ft
Electrical 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum and polycarbonate.
Mounting Surface, flat or angle mount.
Dimming Dimmable with appropriate remote power supply.
IP 50 (Interior)
Delivered Lumens: 763 lm 1W LEDs, 4’ length, S3 spacing, 120°, flat frosted, 3000K std
no angle, flat lens
45° angle
45.0
°
1-3/8”35mm
1”25mm
1-1/4”32mm
flat frosted lens convex clear lens
45.0
°
1-3/8”35mm
1”25mm
1-1/4”32mm
45.0
°
1-3/8”35mm
1”25mm
1-1/4”32mm
flat frosted lens convex clear lens
speCIfICatIon
approx. 55 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
25.2’
19.6’
16.8’
11.2’
8.4’
2.8’
26.4’
20.6’
17.6’
11.7’
8.8’
2.9’54.4
6.0
3.4
1.5
1.1
0.7
Center Beam FC Beam Width
0° Spread: 109.0° 90° Spread: 111.5°
L102N1’ LengthS56 Spacing120°Flat Frosted3000K Std141 lm
Polar Candela Distribution Illuminance at a Distance
approx. 55 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
25.2’
19.6’
16.8’
11.2’
8.4’
2.8’
26.4’
20.6’
17.6’
11.7’
8.8’
2.9’54.4
6.0
3.4
1.5
1.1
0.7
Center Beam FC Beam Width
0° Spread: 109.0° 90° Spread: 111.5°
L102N1’ LengthS56 Spacing120°Flat Frosted3000K Std141 lm
Polar Candela Distribution Illuminance at a Distance
51MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L102 Linear
1.9W/ft, 3.9W/ft
Electrical 0.07W LEDs powered by remote DC driver.
Material Anodized aluminum and polycarbonate.
Mounting Surface, flat or angle mount.
Dimming Dimmable with appropriate remote power supply.
IP 50 (Interior)
Delivered Lumens: 141 lm 0.07W LEDs, 1’ length, S56 spacing, 120°, flat frosted, 3000K std
45° angle
45.0
°
1-3/8”35mm
1”25mm
1-1/4”32mm
flat frosted lens convex clear lens
45.0
°
1-3/8”35mm
1”25mm
1-1/4”32mm
45.0
°
1-3/8”35mm
1”25mm
1-1/4”32mm
flat frosted lens convex clear lens
No angle, flat lens
Code Code Length spacing** Color CrI Beam Lens finish
L102 - S56 S W -
N = no angleA = 45° angle
X = custom* S56 = 56 Leds per 1’
*Minimum 1’ long (305mm), 3” (76mm) increments up to 8’ (2438mm) max. **S56 = 18’ (5486mm) max. per
100W24V driver
W27 = 2700KW30 = 3000K
S = 80+std CrI W = wide flood (120°)
T = flat clearF = flat frostedC = convex clear
MA = matte clear anodizedBA = black anodizedBZ = bronze
2-1/8”
1-1/4”
2-3/4”
3-1/8”(79.4mm)
2-1/8”(54mm)
1-1/4”(31.75mm)
2-3/4”(69.9mm)
3-1/8”(79.4mm)
approx. 330 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
30.2’
23.5’
20.1’
13.4’
10.1’
3.4’
30.5’
23.7’
20.4’
13.6’
10.2’
3.4’326.1
36.2
20.4
9.1
6.7
4.0
Center Beam FC Beam Width
0° Spread: 118.3° 90° Spread: 119°
Polar Candela DistributionL1034’ LengthS2 Spacing120°Flat Frosted3000K Std1144 lm
Illuminance at a Distance
approx. 330 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
30.2’
23.5’
20.1’
13.4’
10.1’
3.4’
30.5’
23.7’
20.4’
13.6’
10.2’
3.4’326.1
36.2
20.4
9.1
6.7
4.0
Center Beam FC Beam Width
0° Spread: 118.3° 90° Spread: 119°
Polar Candela DistributionL1034’ LengthS2 Spacing120°Flat Frosted3000K Std1144 lm
Illuminance at a Distance
* DC: Minimum 1’ long (305mm), 6” (152.4mm) increments up to 8’ (2438mm) max
* AC: 1’ (305mm) increments. 4’ (1219mm) max.
52 MP LIGHTING PRODUCT CATALOGUE
L103 Linear
4W/ft, 6W/ft
Electrical 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum and polycarbonate.
Mounting Mounts directly to surface by wall bracket, rod or cable suspension set (sold separately) Power feed is 12” (305mm) from the end, power canopy (sold separately)
Dimming Dimmable with appropriate remote power supply.
IP 50 (Interior)
SDF060
cable suspension
CPY054 CPY055 SDF061
rod suspension
SDF070
wall bracket
Delivered Lumens: 1144 lm 1W LEDs, 4’ length, S2 spacing, 120°, flat frosted, 3000K std
MountIng HardWare: (sold separately)see page 86-87 for detail
round flexible power canopy
square flexible power canopy
cable suspension (SDF060) and wall bracket (SDF070) configuration (sold separately)
speCIfICatIon
Code Length spacing** Color CrI Beam Lens Input Voltage power feed finish
L103 - W -
X = custom* S2 = 2” (51mm)S3 = 3” (76mm)**between LeDs
note:S2 = 12’ (3658mm) max. per 100W24V driverS3 = 18’ (5486mm) max. per 100W24V driver
W20S = 2000KW27S = 2700KW30S = 3000KW35S = 3500KW41S = 4100K
S = 80+std CrIH = 90+high CrI
(not available for W41S)
W = wide flood (120°)
T = flat clearF = flat frostedC = convex clear
A = 12V aC*only available in increments of 1ft (305mm)D = dC*only available in increments of 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronze
E = end feedT = top feed
approx. 3000 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
5.4’
4.2’
3.6’
2.4’
1.8’
0.6’
5.4’
4.2’
3.6’
2.4’
1.8’
0.6’2966
329.6
185.4
82.4
60.5
36.6
Center Beam FC Beam Width
0° Spread: 33.2° 90° Spread: 33.1°
Polar Candela DistributionL1044’ LengthS2 Spacing30°, Frosted3000K Std1060 lm
Illuminance at a Distance
approx. 3000 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
5.4’
4.2’
3.6’
2.4’
1.8’
0.6’
5.4’
4.2’
3.6’
2.4’
1.8’
0.6’2966
329.6
185.4
82.4
60.5
36.6
Center Beam FC Beam Width
0° Spread: 33.2° 90° Spread: 33.1°
Polar Candela DistributionL1044’ LengthS2 Spacing30°, Frosted3000K Std1060 lm
Illuminance at a Distance
3-5/8”4-1/4”
2-1/2”
1-1/4”
3”
3-5/8”(92mm)
4-1/4”(108mm)
2-1/2”(64mm)
1-1/4”(31.75mm)
3”(76mm)
2-3/8”(60.3mm)
53MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
L104 Linear
4W/ft, 6W/ft
Electrical 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum and polycarbonate.
Mounting Cable suspension or wall bracket (sold separately).
Dimming Dimmable with appropriate remote power supply.
IP 50 (Interior)
SDF060
cable suspension
CPY054 CPY055 SDF061
rod suspension
SDF070
wall bracket
Delivered Lumens: 1060 lm 1W LEDs, 4’ length, S2 spacing, 30°, flat frosted, 3000K std
tiltable wall mount (included) or cable suspension (SDF060) configuration (sold separately)
round flexible power canopy
square flexible power canopy
MountIng HardWare: (sold separately)see page 86-87 for detail
Code Length spacing** Color CrI Beam Lens Input Voltage power feed finish
L104 - -
X = custom* S2 = 2” (51mm)S3 = 3” (76mm)**between LeDs
note:S2 = 12’ (3658mm) max. per 100W24V driverS3 = 18’ (5486mm) max. per 100W24V driverW20 has consistent binning that falls within 1.5 MacAdam ellipse.
W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K
S = 80+std CrIH = 90+high CrI
(not available for W41S)
S = spot (12°)N = narrow flood (30°)
T = flat clearF = flat frosted
A = 12V aC*only available in increments of 1ft (305mm)D = dC*only available in increments of 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronze
E = end feedT = top feed
* DC: Minimum 1’ long (305mm), 6” (152.4mm) increments up to 8’ (2438mm) max
* AC: 1’ (305mm) increments. 4’ (1219mm) max.
1-1/4”(32mm)
1-1/2”(38.1mm)
2-1/2”
2-5/8”
2-1/2”(64mm)
2-5/8”(66.7mm)
approx. 2500 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.7° 90° Spread: 30.6°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
4.9’
3.8’
3.3’
2.2’
1.6’
0.5’
4.9’
3.8’
3.3’
2.2’
1.6’
0.5’2480
275.6
155
68.9
50.6
30.6
Center Beam FC Beam Width
Polar Candela DistributionL1044’ LengthS3 Spacing30°, Frosted3000K Std713 lm
Illuminance at a Distance
approx. 2500 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 30.7° 90° Spread: 30.6°
9.0’
7.0’
6.0’
4.0’
3.0’
1.0’
4.9’
3.8’
3.3’
2.2’
1.6’
0.5’
4.9’
3.8’
3.3’
2.2’
1.6’
0.5’2480
275.6
155
68.9
50.6
30.6
Center Beam FC Beam Width
Polar Candela DistributionL1044’ LengthS3 Spacing30°, Frosted3000K Std713 lm
Illuminance at a Distance
* DC: Minimum 1’ long (305mm), 6” (152.4mm) increments up to 8’ (2438mm) max
* AC: 1’ (305mm) increments. 4’ (1219mm) max.
54 MP LIGHTING PRODUCT CATALOGUE
L106 Linear
4W/ft, 6W/ft
Electrical 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum and polycarbonate.
Mounting Surface mount or tiltable wall bracket.
Dimming Dimmable with appropriate remote power supply.
IP 50 (Interior)
Delivered Lumens: 713 lm 1W LEDs, 4’ length, S3 spacing, 30°, flat frosted, 3000K std
surface mount or tiltable wall mount (included)
speCIfICatIon
Code Mount Length spacing** Color CrI Beam Lens Input Voltage finish
L106 - -
S= surface mountT = tiltable
X = Custom* S2 = 2” (51mm)S3 = 3” (76mm) **between LeDs
W20S = 2000KW27S = 2700KW30S= 3000KW35S = 3500KW41Sw = 4100K
S = 80+std CrIH = 90+high CrI(not available inW41S)
S = spot (12°)N = narrow flood
(30°)
T = flat clearF = flat frosted
A = 12V aC*only available in increments of 1ft (305mm)D = dC*only available in increments of 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronze
NOTE:
S2 = 12’(3658mm) max. per 100W24V driver S3 = 18’(5486mm) max. per 100W24V driver
W20 has consistent binning that falls within 1.5 MacAdam ellipse.
1-1/4”(32mm)
openingsuggested
1-1/2”(38mm)
standardmaterial length
5/8”(16mm)
1-1/4”(32mm)
openingsuggested
1-1/2”(38mm)
standardmaterial length
5/8”(16mm)
approx. 173 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
8.0’
6.0’
4.0’
2.0’
1.0’
31.0’
27.5’
20.7’
13.8’
6.9’
3.4’
28.6’
25.5’
19.1’
12.7’
6.4’
3.2’173.0
43.3
10.8
4.8
2.7
2.1
Center Beam FC Beam Width
0° Spread: 119.7° 90° Spread: 115.7°
L107N1’ Length12W per 1’120°Flat Frosted Lens3000K Std493 lm
Polar Candela Distribution Illuminance at a Distance
approx. 173 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
8.0’
6.0’
4.0’
2.0’
1.0’
31.0’
27.5’
20.7’
13.8’
6.9’
3.4’
28.6’
25.5’
19.1’
12.7’
6.4’
3.2’173.0
43.3
10.8
4.8
2.7
2.1
Center Beam FC Beam Width
0° Spread: 119.7° 90° Spread: 115.7°
L107N1’ Length12W per 1’120°Flat Frosted Lens3000K Std493 lm
Polar Candela Distribution Illuminance at a Distance
55MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
Delivered Lumens: 493 lm 0.26W/LEDs, 1’ length, 12W/Ft, 12°, flat frosted, 3000K std
L107 Linear
7W/ft, 12W/ft
Electrical 0.26W LEDs powered by remote constant voltage driver.
Material Anodized aluminum and polycarbonate.
Mounting Surface mount or recessed mount with spring clip (included).
Dimming Dimmable with appropriate remote power supply.
IP 52 (Interior)
Code Mount Wattage* Length spacing Color Beam Lens finish
L107 N - S56 W -
N = no angle A = 7W/ftB = 12W/ft
X = custom minimum 1ft long (305mm), 3” (76mm) increments up to 8’ (2438mm) max
S56 = 56 Leds per 1’ W27S = 2700K, std CrIW30S = 3000K, std CrI
W = wide flood (120°)
T = flat clearF = flat frostedC = convex clear
MA = matte clear anodizedBA = black anodizedBZ = bronzeWH = white
* note:7W/Ft = 11’ (3353mm) max. per 100W24V driver12W/Ft = 6’ (1829mm) max. per 100W24V driverStardard CRI has a value of 75~82.
Length
8"203mm
5/8"15mm
1/8"2mm
5/8"15mm
1/2"12mm
3/4"20mm
Length
8"203mm
5/8"15mm
1/8"2mm
5/8"15mm
1/2"12mm
3/4"20mm
Length
8"203mm
5/8"15mm
1/8"2mm
5/8"15mm
1/2"12mm
3/4"20mm
approx. 38 cdmax.
0°
180°
90°
45°-45°
-90°
6.0’
5.0’
4.0’
3.0’
2.0’
1.0’
19.6’
16.3’
13.0’
9.8’
6.5’
3.3’
11.6’
9.7’
7.8’
5.8’
3.9’
1.9’36.6
9.15
4.06
2.29
1.46
1.02
Center Beam FC Beam Width
0° Spread: 117.0° 90° Spread:88.2°
L109N
Flat Frosted Lens3000K Std, 80+CRI90lm
Polar Candela Distribution Illuminance at a Distance
56 MP LIGHTING PRODUCT CATALOGUE
Delivered Lumens: 90 lm 0.26W/LEDs,1’ Length, 2W per 1’, 3000K, 120°
L109Linear
2W/ft
Electrical 0.26W, 80 mA LEDs. Powered by remote 120V primary, constant voltage driver (not included).
Material Anodized aluminum and polycarbonate. RoHS compliant.
Mounting Mounts directly to surface or recessed mount with friction fit spring clip. Comes with 3’ (914mm) wire lead.
Dimming Dimmable with appropriate remote power supply.
IP 52 (Interior)
speCIfICatIon
Code Mount Wattage Length Color Beam Lens finish
L109 N - A W F -
N = no angle A = 2W/ft X = custom
minimum 1ft long (305mm), 6”(152mm) increments up to 8’ (2438.4 mm) max
W22S = 2200K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrI
W = wide flood (120°)
F = flat frosted MA = matte clear anodizedBA = black anodizedBZ = bronze
5-1/4”(133.4mm)
1-1/4”(32mm)
3/4”(19mm)
14-1/4”(362mm)
8-1/4”(210mm)
approx. 2100 cdmax.
0°
180°
90°
45°-45°
-90°
-0°
-90°
0.1 fc
1020
5
1
0
1
0.5
0.5
0.5 0.50
Mount height: 1 ft Total LLF: 1
L15112W, 30°3000K Std514 lm
Isofootcandle PlotPolar Candela Distribution
approx. 2100 cdmax.
0°
180°
90°
45°-45°
-90°
-0°
-90°
0.1 fc
1020
5
1
0
1
0.5
0.5
0.5 0.50
Mount height: 1 ft Total LLF: 1
L15112W, 30°3000K Std514 lm
Isofootcandle PlotPolar Candela Distribution
57
speCIfICatIon
MP LIGHTING PRODUCT CATALOGUE
L151Linear
3W, 6W, 12W
Electrical 3, 6, or 12 x 1W LEDs (1” spacing between LEDs) powered by remote driver.
Material Anodized aluminum.
Mounting Surface mount.
Dimming Dimmable with appropriate remote power supply.
IP 66 (Exterior/interior)
3W
6W
12W
Delivered Lumens: 514 lm 12W, 30°, 3000K std
Code Length Color Beam Finish
L151 - - MA
5 = 5-1/4” 133.35mm (3W)
8 = 8-1/4” 209.55mm (6W)
14 = 14-1/4” 362mm (12W)
MA = matte clear anodized12 = 12° beam
30 = 30° beam
60 = 60° beam
120 = 120° beam (no lens)
note: Standard CRI has a value of 75~82 while high CRI has 92.
W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRIW20H = 2000K, high CRIW30H = 3000K, high CRI
approx. 130 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
2.5 fc
10
20
5
02
0
2
2
3
1
1
1 1 2
Mount height: 1 ft Total LLF: 1
L16112” length85°3000K Std280 lm
Isofootcandle PlotPolar Candela Distribution
approx. 130 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
2.5 fc
10
20
5
02
0
2
2
3
1
1
1 1 2
Mount height: 1 ft Total LLF: 1
L16112” length85°3000K Std280 lm
Isofootcandle PlotPolar Candela Distribution
length1”(25.4mm)
stem
58 MP LIGHTING PRODUCT CATALOGUE
Delivered Lumens: 280 lm 1W LEDs, 12” length, 85°, 3000K std
L161Linear
6W/ft
Electrical 1W LEDs powered by remote DC driver.
Material Anodized aluminum.
Mounting Ceiling or wall mount. Bracket available for millwork installations.
Dimming Dimmable with appropriate remote driver.
IP 40 (Interior)
mounting bracket (MB)
speCIfICatIon
Code Mount Length Color CrI stem finish
L161 - -
C1M = Ø2-3/8”(60mm) x 1/4” (6.35mm)canopy w/ retrofit mounting plateMB = mounting bracket
X = min. 12” (305mm) and 6” (153mm) increments custom up to 48”(1219mm)
0 = no stem6 = 6” (152mm) stem12 = 12” (305mm) stemX = custom up to 24”
(610mm)
MA = matte clear anodizedBA = black anodizedBZ = bronze
W20S = 2000KW27S = 2700KW30S = 3000KW35S = 3500KW41S = 4100K
S = 80+standard CrIH = 90+CrI(availble in 2000K and 3000K only)
Length
stem
48-3/8” (1229mm)
1-1/4”32mm
2-1/8”54mm
1-5/8”41mm
1-5/8”41mm
Shown with 12-7/8”(327mm) stem and 49-7/8”(1267mm) length.
For 120˚ beam
2-1/8”54mm
59MP LIGHTING PRODUCT CATALOGUE
speCIfICatIonspeCIfICatIon
Delivered Lumens: 434 lm 1’ Length, 7W per 1’, 3000K, 120°, Flat clear lens
L162Linear
6W/ft
Electrical 1W, 350mA LEDs.
Material Aluminum and polycarbonate. RoHS compliant.
Mounting Surface mount. Includes aluminum mounting channel with wiring compartment. Comes with 3’ (914mm) wire lead.
Dimming Dimmable with appropriate remote driver.
IP 52 (Interior)
speCIfICatIon
approx. 151.7cdmax.
0°
180°
90°
45°-45°
-90°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
62.0’
51.7’
41.4’
31.0’
20.7’
10.3’
57.6’
48.0’
38.4’
28.8’
19.2’
9.6’16.81
4.20
1.87
1.05
0.67
0.47
Center Beam FC Beam Width
0° Spread: 119.7° 90° Spread: 116.0°
L107N1’ Length7W per 1’120°Flat Clear3000K 80+CRI434.4lm
Polar Candela Distribution Illuminance at a Distance
Code Length Led spacing* Color Beam Lens stem finish
L162 - -
T = flat clearF = flat frosted
S = spot (12°) N = narrow flood (30°)
MA = matte clear anodizedBA = black anodizedBZ = bronze
0 = no stem6 = 6” (152mm) stem12 = 12” (305mm) stemX = custom up to 24”
(610mm)
W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K , std CrIW20H = 2000K, high CrIW30H = 3000K, high CrIW27H = 2700K, high CrIW35H = 3500K, high CrI
S2= 2” (51mm)
S3= 3” (76mm) between Leds
X = custom*
* note:Minimum 1’ (305mm), 3”(76mm) incrementsUp to 6ft (1829mm)max
NOTE:
S2 = 12’(3658mm) max. per 100W24V driver S3 = 18’(5486mm) max. per 100W24V driver
L163Linear
6W/ft
Electrical 0.26W, 80 mA LEDs.(7W/ft or 12W/ft) Powered by remote 120V primary, constant voltage driver (not included).
Material Aluminum and polycarbonate. RoHS compliant.
Mounting Surface mount. Includes aluminum mounting channel with wiring compartment. Comes with 3’ (914mm) wire lead.
Dimming Dimmable with appropriate remote driver.
IP 52 (Interior)
Length
stem
48-3/8” (1229mm)
1-1/4”32mm
2-1/8”54mm
1-5/8”41mm
1-5/8”41mm
Shown with 12-7/8”(327mm) stem and 49-7/8”(1267mm) length.
For 120˚ beam
2-1/8”54mm
Delivered Lumens: 434 lm 1’ Length, 7W per 1’, 3000K, 120°, Flat clear lens
approx. 151.7cdmax.
0°
180°
90°
45°-45°
-90°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
62.0’
51.7’
41.4’
31.0’
20.7’
10.3’
57.6’
48.0’
38.4’
28.8’
19.2’
9.6’16.81
4.20
1.87
1.05
0.67
0.47
Center Beam FC Beam Width
0° Spread: 119.7° 90° Spread: 116.0°
L107N1’ Length7W per 1’120°Flat Clear3000K 80+CRI434.4lm
Polar Candela Distribution Illuminance at a Distance
60 MP LIGHTING PRODUCT CATALOGUE
Code Wattage LengtH Led spaCIng* CoLor CrI BeaM Lens steM fInIsH
L163 - S56 S W -
T = flat clearF = flat frosted
W = wide (120°) MA = matte clear anodized
BA = black anodizedBZ = bronze
0 = no stem6 = 6” (152mm) stem12 = 12” (305mm) stemX = custom up to 24”
(610mm)
W27 = 2700KW30 = 3000K
S56 = 56 Leds per 1”
X = custom*4 = 4W7 = 7W12 = 12W
S = 80+standard CrI
* note:7W/Ft = 11’ (3353mm) max. per 100W24V driver12W/Ft = 6’ (1829mm) max. per 100W24V driverStardard CRI has a value of 75~82
Minimum 1’ (305mm), 3” (76mm) increments
speCIfICatIon
61MP LIGHTING PRODUCT CATALOGUE
CaBInet
Image shows L66
Ø1-1/2”(38mm)
1/2”(13mm)
3/8”(9.5mm)
Ø1-1/2”(38mm)
Ø2”(51mm)
approx. 37 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 108.3° 90° Spread: 108.8°
3.0’
2.5’
2.0’
1.5’
1.0’
0.5’
8.3’
6.9’
5.5’
4.1’
2.8’
1.4’
8.4’
7.0’
5.6’
4.2’
2.8’
1.4’148.0
37.0
16.4
9.3
5.9
4.1
Center Beam FC Beam Width
Illuminance at a DistanceL512.5W, 120°3000K Std104 lm
Polar Candela Distribution
approx. 37 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 108.3° 90° Spread: 108.8°
3.0’
2.5’
2.0’
1.5’
1.0’
0.5’
8.3’
6.9’
5.5’
4.1’
2.8’
1.4’
8.4’
7.0’
5.6’
4.2’
2.8’
1.4’148.0
37.0
16.4
9.3
5.9
4.1
Center Beam FC Beam Width
Illuminance at a DistanceL512.5W, 120°3000K Std104 lm
Polar Candela Distribution
62 MP LIGHTING PRODUCT CATALOGUE62
L51 & L52Cabinet
1W, 2.5W
Electrical 1W or 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum.
Mounting L51, surface mount to cabinet millwork. L52, recessed mount to cabinet millwork with friction fit spring clip.
Cutout Size Ø1-1/2” (L52)
Accessories Full shroud or half shroud (see page 85 for details).
Dimming Dimmable with appropriate remote power supply.
IP 40 (Interior)
L51 - surface mount
L52 - recessed mount
Delivered Lumens: 104 lm 2.5W, 120°, NA, 3000K std
120°half
shroud(HS)
12° / 30°no
shroud(NA)
12° / 30°half
shroud(HS)
12° / 30°full
shroud(FS)
120°full
shroud(FS)
Accessories: (see page 85 for details)
Code Wattage Color Beam accessories Input Voltage finish
L51/L52 - -
1 = 1W 2 = 2.5W
120 = 120°30 = 30°12 = 12°
NA = no accessories
FS = full shroud
HS = half shroud
A = 12V aC(12V AC not avaliable for High CRI)D = dC
MA = matte clear anodizedBA = black anodizedBZ = bronzeWH = white
W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
speCIfICatIon
Ø2-1/2”(64mm)
Ø3”(76mm)
1/2”(13mm)
Ø3”(76mm)
1/2”(12.7mm)
0°
180°
90°
45°-45°
-90°
approx. 55 cdmax. 6.0’
5.0’
4.0’
3.0’
2.0’
1.0’
13.5’
11.3’
9.0’
6.8’
4.5’
2.3’
12.1’
10.1’
8.0’
6.0’
4.0’
2.0’55.0
13.8
6.1
3.4
2.2
1.5
Center Beam FC Beam Width
0° Spread: 96.8° 90° Spread: 90.4°
Polar Candela DistributionL64120°, NA3000K Std112 lm
Illuminance at a Distance
0°
180°
90°
45°-45°
-90°
approx. 55 cdmax. 6.0’
5.0’
4.0’
3.0’
2.0’
1.0’
13.5’
11.3’
9.0’
6.8’
4.5’
2.3’
12.1’
10.1’
8.0’
6.0’
4.0’
2.0’55.0
13.8
6.1
3.4
2.2
1.5
Center Beam FC Beam Width
0° Spread: 96.8° 90° Spread: 90.4°
Polar Candela DistributionL64120°, NA3000K Std112 lm
Illuminance at a Distance
63MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
63
L64 & L65Cabinet
2.5W
Electrical 2.5W LED powered by remote driver.
Material Anodized aluminum.
Mounting L64, surface mount to cabinet millwork. L65, recessed mount to cabinet millwork with friction fit spring clip.
Cutout Size Ø2-1/2” (L65)
Accessories Full shroud or half shroud (see page 85 for details).
Dimming Dimmable with appropriate remote power supply.
IP 40 (Interior)
Delivered Lumens: 112 lm 2.5W, 120°, NA, 3000K std
L64 - surface mount
L65 - recessed mount
120°half
shroud(HS)
12° / 30°no
shroud(NA)
12° / 30°half
shroud(HS)
12° / 30°full
shroud(FS)
120°full
shroud(FS)
Accessories: (see page 85 for details)
2 = 2.5W W20S = 2000K, std CrIW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
12 = spot (12°)30 = narrow flood (30°)120= wide flood (120°)
NA = no accessoryHS = half shroudFS= full shroud
A = 12V aC(*12V AC not avaliable for High CRI)D = dC
MA = matte clear anodizedWH = whiteBA = black anodizedBZ = bronze
Code Wattage Color Beam accessories Input Voltage finish
L64/L65 - 2 -
0°
180°
90°
45°-45°
-90°
approx. 650 cdmax. 6.0’
5.0’
4.0’
3.0’
2.0’
1.0’
2.2’
1.9’
1.5’
1.1’
0.7’
0.4’
2.2’
1.9’
1.5’
1.1’
0.7’
0.4’652.1
163.0
72.5
40.8
26.1
18.1
Center Beam FC Beam Width
0° Spread: 21.2° 90° Spread: 21.2°
Polar Candela DistributionL6630°, HS3000K Std123 lm
Illuminance at a Distance
0°
180°
90°
45°-45°
-90°
approx. 650 cdmax. 6.0’
5.0’
4.0’
3.0’
2.0’
1.0’
2.2’
1.9’
1.5’
1.1’
0.7’
0.4’
2.2’
1.9’
1.5’
1.1’
0.7’
0.4’652.1
163.0
72.5
40.8
26.1
18.1
Center Beam FC Beam Width
0° Spread: 21.2° 90° Spread: 21.2°
Polar Candela DistributionL6630°, HS3000K Std123 lm
Illuminance at a Distance
Ø2-1/2”(64mm)
Ø3”(76.2mm)
5/8”(15.88mm)
64 MP LIGHTING PRODUCT CATALOGUE64
Delivered Lumens: 123 lm 2.5W, 30°, HS, 3000K std
L66Recessed Cabinet
2.5W
Electrical 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum.
Mounting Recessed mount to cabinet millwork with friction fit spring clip.
Cutout Size Ø2-1/2”
Dimming Dimmable with appropriate remote power supply.
IP 40 (Interior)
black finish
white finish
Code Wattage Color Beam Input Voltage finish
L66 - 2 -
2 = 2.5W W20 = 2000K, std CrIW27 = 2700K, std CrIW30 = 3000K, std CrI
S = spot (12°)N = narrow flood (30°)F= flood (48°)
A = 12V aCD = dC
WH = white glassBK = black glass
note: Standard CRI has a value of 75~82 while high CRI has 92. W20H has consistent binning that falls within 1.5 MacAdam ellipse.
speCIfICatIon
Code Wattage Color Beam Input Voltage finish
L500/L501 - 2 -
2 = 2.5W W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = spot (12°)N = narrow flood (30°)F= flood (48°)
MA = matte clear anodizedBA = black anodizedBZ = bronzeABZ = antique bronzeWH = white
A = 12V aC(*12V AC not avaliable for High CRI)D = dC
approx. 350 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 28.0° 90° Spread: 29.6°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
9.5’
7.9’
6.3’
4.7’
3.2’
1.6’38.9
9.7
4.3
2.4
1.6
1.1
Center Beam FC Beam Width
Polar Candela DistributionL5003000K 80+CRINF Beam112 lm
Illuminance at a Distance
1-1/2”38mm
2-1/4”sq.57mm sq.
Ø1-5/8”Ø41mm
L500
65MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
65
L500 & L501Recessed mount cabinet light
2.5W
Electrical 2.5W, 700mA or 3.5W, 1000mA LED.
Material Anodized aluminum. RoHS compliant.
Mounting Recessed mount to cabinet millwork. Comes with 6’ (1829 mm) wire lead.
IP 40 (Interior)
Delivered Lumens: 112 lm 2.5W, 30°, 3000K std
L500
L501
L500
1-3/8”35mm
Ø2-1/2”Ø63.5mm
1/8”3mm
1 3/8 in36 mm
1/8 in2 mm
2 1/2 in62 mm
1 7/8 in48 mm
1 5/8 in41 mm
4 3/4 in120 mm
2 7/8 in72 mm
1 5/8 in40 mm
L501
2-1/4” (57mm)
3” (76mm)
Adjustable 30°
1”(25mm)
66 MP LIGHTING PRODUCT CATALOGUE66
Delivered Lumens: 112 lm 2.5W, 30°, 3000K std
L550Tiltable Recessed Cabinet
2.5W
Electrical 2.5W LED powered by remote DC driver or 12V AC magnetic transformer.
Material 2.5W, 700mA LED.
Mounting Recessed mount to cabinet millwork or drywall. Comes with 6’ (1829 mm) wire lead.
Cutout Size Ø2-1/2”
Dimming Dimmable with appropriate remote power supply.
IP 40 (Interior)
Code Wattage Color Beam Input Voltage finish
L550 - 2 -
2 = 2.5W W27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW27H = 2700K, high CrIW30H = 3000K, high CrIW35H = 3500K, high CrI
S = spot (12°)N = narrow flood (30°)F = flood (48°)
MA = matte clear anodizedBA = black anodizedBZ = bronzeWH = white
A = 12V aC(*12V AC not avaliable for High CRI)D = dC
approx. 350 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 28.0° 90° Spread: 29.6°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
9.5’
7.9’
6.3’
4.7’
3.2’
1.6’38.9
9.7
4.3
2.4
1.6
1.1
Center Beam FC Beam Width
Polar Candela DistributionL5003000K 80+CRINF Beam112 lm
Illuminance at a Distance
speCIfICatIon
67MP LIGHTING PRODUCT CATALOGUE
pendant
Image shows L191
Ø2”(51mm)
length
68 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
L191pendant
9W, 17W
Electrical 0.07W LEDs powered by remote DC driver.
Material Shade - PMMA. Hardware - Machined aluminum with electroplated finish.
Mounting Canopy mount.
Dimming Dimmable with appropriate remote power supply.
Delivered Lumens: 219 lm 2’ length, 3000K std
C1MC3C4
approx. 43 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 113.2° 90° Spread: 94.5°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
45.5’
54.6’
36.4’
27.3’
18.2’
9.1’
39.0’
32.5’
26.0’
19.5’
13.0’
6.5’0.30
0.07
0.03
0.02
0.01
0.01
Center Beam FC Beam Width
Illuminance at a DistanceL1912’ Length3000K Std219 lm
Polar Candela Distribution
Code Mount Length Color stem / Cord finish
L191 - -
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopy
2 = 2’ (320 LeDs)4 = 4’ (640 LeDs)
W22 = 2200KW27 = 2700K W30 = 3000KW35S= 3500K (W35S available upon request)
S6 = 6” (152mm) stemSX = custom stem*C72 = 72” (1829mm)
cordCX = custom cord
MA= matte clear anodizedBN = brushed nickel
* available in 1”(25mm) increments up to 8ft (2439mm) max.
speCIfICatIon
69MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
MOUNTING OPTIONS
Length
Ø4”Ø102mm
Ø4”Ø102mm
Ø6-3/8”Ø60mm
1/4”6mm
stem/cord
Length
Ø2-3/8”Ø60mm
1-3/4”44mm
1/4”6mm
Ø4”Ø102mm
Length
L192pendant
9W, 17W
Electrical 0.07W LEDs powered by remote DC driver.
Material Shade - PMMA. Hardware - Machined aluminum with electroplated finish.
Mounting Canopy mount.
Dimming Dimmable with appropriate remote power supply.
Delivered Lumens: 219 lm 2’ length, 3000K std
C1MC3C4
approx. 44.5cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 108.2° 90° Spread: 109.8°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
41.5’
49.8’
33.2’
24.9’
16.6’
8.3’
51.2’
42.7’
34.2’
25.6’
17.1’
8.5’0.25
0.06
0.03
0.02
0.01
0.01
Center Beam FC Beam Width
Illuminance at a DistanceL1922’ Length3000K Std253 lm
Polar Candela Distribution
Code Mount Length Color stem / Cord finish
L192 - -
2 = 2’ (320 LeDs)4 = 4’ (640 LeDs)
W22 = 2200KW27 = 2700K W30 = 3000KW35S= 3500K (W35S available upon request)
S6 = 6” (152mm) stemSX = custom stem*C72 = 72” (1829mm)
cordCX = custom cord
MA= matte clear anodizedBN = brushed nickel
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopy * available in 1”(25mm)
increments up to 8ft (2439mm) max.
70 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
4 5/8 in116 mm
3 1/2 in88 mm
1/4 in7 mm
Length
1 in25 mm
L195pendant
1W
Electrical 1W, 350mA.
Material Shade - anodized aluminum. Hardware - Machined aluminum with electroplated finish.
Mounting Canopy mount.
Dimming Dimmable with appropriate remote power supply.
Delivered Lumens: 11.3m 2’ length, 3000K std
C1MC3C4
0°
180°
90°
50°-50°
-90°
0° Spread: 110.9° 90° Spread: 111.0°
18.0’
15.0’
12.0’
9.0’
6.0’
3.0’
12.2’
14.7’
9.8’
7.3’
4.9’
2.4’
16.2’
13.5’
10.8’
8.1’
5.4’
2.7’1.79
0.45
0.20
0.11
0.07
0.05
Center Beam FC Beam Width
Illuminance at a DistanceL1951 Watt3000K Std11.3lm
Polar Candela Distribution
speCIfICatIon
Code Wattage Mount Length Color stem / Cord finish
L195 1 - - BA
1 = 1’ 2 = 2’ 4 = 4’ 6 = 6’
W27S = 2700K, std CrIW27H = 2700K, high CrI W30S = 3000K, std CrIW30H = 3000K, high CrIW35S = 3500K, std CrIW35H = 3500K, high CrIW41S = 4100K, std CrI
C72 = 72” (1829mm) cord
CX = custom cord
BA = black anodizedC1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopySRB = single rail black
1 = 1W
0° Spread: 35.6° 90° Spread: 35.0°
Center Beam FC Beam Width
3.0’
2.5’
2.0’
1.5’
1.0’
0.5’
1.9’
1.6’
1.3’
1.0’
0.6’
0.3’
1.9’
1.6’
1.3’
0.9’
0.6’
0.3’568
142
63.1
35.5
22.7
15.8
0°
180°
90°
45°-45°
-90°
approx. 142 cdmax.
Illuminance at a DistanceP81L3000K Std181 lm
Polar Candela Distribution
0° Spread: 35.6° 90° Spread: 35.0°
Center Beam FC Beam Width
3.0’
2.5’
2.0’
1.5’
1.0’
0.5’
1.9’
1.6’
1.3’
1.0’
0.6’
0.3’
1.9’
1.6’
1.3’
0.9’
0.6’
0.3’568
142
63.1
35.5
22.7
15.8
0°
180°
90°
45°-45°
-90°
approx. 142 cdmax.
Illuminance at a DistanceP81L3000K Std181 lm
Polar Candela Distribution
11-1/8”(282.6mm)
Ø3”(76mm)
71MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
P81L glass pendant
6W
Electrical 6 x 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Shade - Frosted opalescent glass. Hardware - Machined aluminum with electroplated finish.
Mounting Canopy, rail systems, and multi-circuit track systems.
Dimming Dimmable with appropriate remote power supply.
Delivered Lumens: 181 lm P81L, 6W, 25°, 3000K std
C1C DC SRC1M 1C 3CTC3 C4
speCIfICatIon
WH = white opalescent M = matte clear anodizedB = black anodized
Code Mount Shade Color Input Voltage Mounting Finish
P81L - WH -
1A = 12V AC
2D = 24V DCC1M = Ø2-3/8”(60mm) x
1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyDC = dual circuitSR = single rail
W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K
Note: W20 has consistent binning that falls within 1.5 MacAdam ellipse.
size
Ø3”(76mm)
approx. 650 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 33.2° 90° Spread: 33°
9.0’
8.0’
6.0’
5.0’
3.0’
2.0’
5.4’
4.8’
3.6’
3.0’
1.8’
1.2’
5.3’
4.7’
3.6’
3.0’
1.8’
1.2’160.5
71.3
25.7
17.8
10.0
7.9
Center Beam FC Beam Width
Illuminance at a DistanceL9625°3000K Std254 lm
Polar Candela Distribution
approx. 650 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 33.2° 90° Spread: 33°
9.0’
8.0’
6.0’
5.0’
3.0’
2.0’
5.4’
4.8’
3.6’
3.0’
1.8’
1.2’
5.3’
4.7’
3.6’
3.0’
1.8’
1.2’160.5
71.3
25.7
17.8
10.0
7.9
Center Beam FC Beam Width
Illuminance at a DistanceL9625°3000K Std254 lm
Polar Candela Distribution
(*Matte Clear Anodized is only available for S=6-3/8” 162mm size*)
72 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
P96LAluminum pendant
6W
Electrical 6 x 1W LEDs powered by remote DC driver or 12V AC magnetic transformer. DC - Powered by remote 24V DC
Material Anodized aluminum. RoHS compliant.
Mounting Canopy, and rail systems,
Dimming Dimmable with appropriate remote power supply.
Delivered Lumens: 254 lm 6W, 25°, 3000K std
DC HD SR SRB VDC1M C3 C4
Small (S)
Large (L)
Code Mount Color size Beam Input Voltage stem / Cord finish
P96L - N -
W27S = 2700K std CrIW30S = 3000K std CrIW35S = 3500K std CrIW41S = 4100K std CrIW20H = 2000K high CrIW30H = 3000K high CrI
note: Standard CRI has a value of75-82 while high CRI has 92
S = 6-3/8"L = 18" (black only)
N = narrow flood (25°) S6 = 6” (152mm) stemSX = custom stemC72 = 72” (1829mm) cordCX = custom cord
M = matte clear anodizedB = black anodized
1A = 12V aC2D = 24V dC
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
speCIfICatIon
73MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
P97L Aluminum pendant
6W
Electrical 6 x 1W, 350mA LEDs. . DC - Powered by remote 24V DC
Material Anodized aluminum. RoHS compliant.
Mounting Canopy, rail systems, and multi-circuit track systems.
Dimming Dimmable with appropriate remote power supply.
Delivered Lumens: 76lm 6W, 25°, 3000K std
speCIfICatIon
J-box(not included)
1/4”6mm
2-3/8”ØØ60mm
Surfacelevel
Ø5-1/4”Ø133mm
12”305mm
approx. 178 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 31.2° 90° Spread: 31.1°
9.0’
8.0’
6.0’
5.0’
3.0’
2.0’
5.0’
4.5’
3.4’
2.8’
1.7’
1.1’
5.0’
4.5’
3.3’
2.8’
1.7’
1.1’42.9
19.1
6.9
4.8
2.7
2.1
Center Beam FC Beam Width
Illuminance at a DistanceP97L25°3000K Std76 lm
Polar Candela Distribution
Code Mount Color Beam Input Voltage Cord finish
P97L - N - B
W27S = 2700K std CrIW30S = 3000K std CrIW35S = 3500K std CrIW41S = 4100K std CrIW20H = 2000K high CrIW30H = 3000K high CrI
note: Standard CRI has a value of75-82 while high CRI has 92
N = narrow flood (25°) C72 = 72” (1829mm) cordCX = custom cord
BA = black anodized1A = 12V aC2D = 24V dC
C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate
C3 = Ø4-5/8” x 1/4” canopyC4 = 4-5/8” sq. x 1/4” canopyDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
DC HD SR SRB VDC1M C3 C4
74 MP LIGHTING PRODUCT CATALOGUE
spotLIgHt
Image shows L221
approx. 2300 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.1° 90° Spread: 29.1°
9.0’
8.0’
7.0’
6.0’
5.0’
4.0’
4.7’
4.1’
3.6’
3.1’
2.6’
2.1’
4.7’
4.2’
3.6’
3.1’
2.6’
2.1’140
89.5
62.2
45.7
35.0
27.6
Center Beam FC Beam Width
Illuminance at a DistanceL7230°3000K Std549 lm
Polar Candela Distribution
approx. 2300 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.1° 90° Spread: 29.1°
9.0’
8.0’
7.0’
6.0’
5.0’
4.0’
4.7’
4.1’
3.6’
3.1’
2.6’
2.1’
4.7’
4.2’
3.6’
3.1’
2.6’
2.1’140
89.5
62.2
45.7
35.0
27.6
Center Beam FC Beam Width
Illuminance at a DistanceL7230°3000K Std549 lm
Polar Candela Distribution
stem
5-1/8”(130.2mm)
4-1/8”(104.8mm)
75MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
MOUNTING OPTIONS
C1 canopy mount
L72 Spotlight
12W
Electrical 12 x 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum.
Mounting Canopy, rail systems, and multi-circuit track systems.
Accessories Cross baffle (see page 81 for details).
Dimming Dimmable with appropriate remote power supply.
IP 20 (Interior)
Delivered Lumens: 549 lm 12W, 30°, 3000K std
DC HD SF SR VDC1M C3 C4
Code Mounting Color Beam Input Voltage stem finish
L72 - - MA
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyDC = dual circuitHD = horizontal double railSF = single rail flush wallSR = single railVD = vertical double rail
S = spot (12°)N = narrow flood (30°)F = flood (60°)
A = 12V aCD = dC
1 = 1” (25mm)X = custom
MA = matte clear anodizedW27S = 2700K, std CrIW30S = 3000K, std CrIW35S = 3500K, std CrIW41S = 4100K, std CrIW20H = 2000K, high CrIW30H = 3000K, high CrI
note: Standard CRI has a value of75~82 while high CRI has 92.
approx. 1300 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.1° 90° Spread: 29.0°
9.0’
8.0’
7.0’
6.0’
5.0’
4.0’
4.7’
4.1’
3.6’
3.1’
2.6’
2.1’
4.7’
4.1’
3.6’
3.1’
2.6’
2.1’82.3
52.6
36.6
26.9
20.6
16.2
Center Beam FC Beam Width
Illuminance at a DistanceL7330°3000K Std318 lm
Polar Candela Distribution
approx. 1300 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.1° 90° Spread: 29.0°
9.0’
8.0’
7.0’
6.0’
5.0’
4.0’
4.7’
4.1’
3.6’
3.1’
2.6’
2.1’
4.7’
4.1’
3.6’
3.1’
2.6’
2.1’82.3
52.6
36.6
26.9
20.6
16.2
Center Beam FC Beam Width
Illuminance at a DistanceL7330°3000K Std318 lm
Polar Candela Distribution
4-1/8”(104.8mm)
3-1/8”(79.4mm)
stem
speCIfICatIon
76 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS DCHDSFSRVD C1MC3C4
C1 canopy mount
L73 Spotlight
6W
Electrical 6 x 1W LEDs powered by remote DC driver or 12V AC magnetic transformer.
Material Anodized aluminum.
Mounting Canopy, rail systems, and multi-circuit track systems.
Dimming Dimmable with appropriate remote power supply.
IP 20 (Interior)
Delivered Lumens: 318 lm 6W, 30°, 3000K std
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x
1/4”(6.35mm) canopy
DC = dual circuit
HD = horizontal double rail
SR = single rail
SF = single rail flush wall
VD = vertical double rail
MA = matte clear anodized1 = 1” (25mm)
X = custom
S = spot (12°)
N = narrow flood (30°)
F = flood (60°)
A = 12V AC
D = 24V DC
Code Mount Color Beam Input Voltage stem finish
L73 - - MA
W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRIW20H = 2000K, high CRIW30H = 3000K, high CRI
speCIfICatIon
approx. 1850 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 23.7° 90° Spread: 23.9°
9.0’
8.0’
7.0’
6.0’
5.0’
4.0’
3.8’
3.4’
2.9’
2.5’
2.1’
1.7’
3.8’
3.4’
3.0’
2.5’
2.1’
1.7’115.1
73.6
51.1
37.6
28.8
22.7
Center Beam FC Beam Width
Illuminance at a DistanceL2214 x 2.5W, 20°3000K StdNA385 lm
Polar Candela Distribution
approx. 1850 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 23.7° 90° Spread: 23.9°
9.0’
8.0’
7.0’
6.0’
5.0’
4.0’
3.8’
3.4’
2.9’
2.5’
2.1’
1.7’
3.8’
3.4’
3.0’
2.5’
2.1’
1.7’115.1
73.6
51.1
37.6
28.8
22.7
Center Beam FC Beam Width
Illuminance at a DistanceL2214 x 2.5W, 20°3000K StdNA385 lm
Polar Candela Distribution
4-5/8”(117.5mm)
Ø2-1/4”(57.2mm)
stem
77MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONSDCHDSRVD C1MC3C4
SH SHB
LSB
L221 Spotlight
10W
Electrical 4 x 2.5W LEDs powered by remote driver.
Material Anodized aluminum.
Mounting Canopy, rail systems, and multi-circuit track systems.
Accessories Metal shroud and filters (see page 85 for details).
Dimming Dimmable with appropriate remote driver.
IP 20 (Interior)
Delivered Lumens: 385 lm 10W, 20°, 3000K std, no accessory
C1 canopy mount
Shown with optional shroud (SHB)
Accessories:
speCIfICatIon
Code Wattage Mount Color CrI Beam stem accessories finish
L221 2 - - MA
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
2 = 2.5W S = spot (20°)N = narrow flood (40°)
2 = 2” (51mm)X = custom
NA = no accessoryBE = beam elongatorCS = crystal spreaderMS = mistlite spreaderELB = eggcrate louver, blackSH = metal shroudSHB = metal shroud, blackLSB = long shroud, black
MA = matte clear anodizedW20 = 2000K (90+CRI only)W27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K
S = 80+standard CrIH = 90+CrI(availble in 2000K and 3000K only)
*Multiple accessories can be selected.
approx. 625 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 28.3°
18’
15’
12’
9.0’
6.0’
3.0’
9.1’
7.6’
6.0’
4.5’
3.0’
1.5’69.5
17.4
7.73
4.35
2.78
1.93
Center Beam FC Beam Width
Illuminance at a Distance
L2252W, 30°80+CRI3000K Std149 lm
Polar Candela Distribution
approx. 625 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 28.3°
18’
15’
12’
9.0’
6.0’
3.0’
9.1’
7.6’
6.0’
4.5’
3.0’
1.5’69.5
17.4
7.73
4.35
2.78
1.93
Center Beam FC Beam Width
Illuminance at a Distance
L2252W, 30°80+CRI3000K Std149 lm
Polar Candela Distribution
3 1/2 in88 mm
7/8 in21 mm
Ø
2 1/8 in54 mm
1 1/8 in30 mm
2 3/8 in60 mmJ-box
(Not included)
DCHDSRVD C1MC3C4
L225Spotlight
2.5W
Electrical 2.5 Watt, 700mA powered by remote driver.
Material Anodized aluminum.
Mounting Canopy, rail systems, and multi-circuit track systems.
Dimming Dimmable with appropriate remote driver.
IP 20
Delivered Lumens: 149.3 lm 2.5W, 30°, 3000K std, no accessory
C1 canopy mount
speCIfICatIon
78 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
Code Wattage Mount Color CrI Beam stem accessories finish
L225 2 - - MA
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
2 = 2.5W S = spot (20°)N = narrow flood (40°)
2 = 2” (51mm)X = custom
NA = no accessoryBE = beam elongatorCS = crystal spreaderMS = mistlite spreaderELB = eggcrate louver, blackSH = metal shroudSHB = metal shroud, blackLSB = long shroud, black
MA = matte clear anodizedW20 = 2000K (90+CRI only)W27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K
S = 80+standard CrIH = 90+CrI(availble in 2000K and 3000K only)
-Multiple accessories can be selected.
-See page 85 for more detail
6-3/8”(162mm)max.
5-3/8”(137mm)max.
FR SM SMB SC SCB
SH SHB BE CS
ELB IR MS UV LH
LSB
79MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
X01 & X06 Halogen / LED Spotlight
50W max. (halogen)
Lamp MR16, 50W max, cover glass recommended (gE constant current color lamp cannot be used with glass shade). Also compatible with LED MR16 lamps. SORAA LED MR16 lamps (10W max.) are recommended.
Sec. Voltage 12V (fixture).
Material Solid brass with durable electroplated finish.
Mounting Canopy, rail, and cable systems.
Rating Dry locations.
X01
X06
Shade & Accessories: (see page 85 for details)
Note: Dimensions above reflect a 1” stem. Custom length available in 1” increments. Maximum length for ceiling is 96” and 16” for SF mount.
CSDCHDSFSRVD C1MC3C4
C1 canopy mount
Shown with SORAA LED MR16 lamp (10W max.)
Code Mounting shade stem accessories finish
X01/X06 - -
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyCS = cable systemDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
NS = no shadeSC = solid metal capSCB = solid metal cap, blackSM = solid metal coneSMB = solid metal cone, black
MC = matte chromeBN = brushed nickelBA = black anodized
- Multiple accessories can be selected.- Accessory holder required with accessories-See page 85 for more detail
1 = 1” (25mm)X = custom length*
* Custom length available in 1”(25.4mm) increments. Maximum length for ceiling is 96”(2.43m) and 16”(406.4mm) for SF mount.
NA = no accessorySH = metal shroudSHB= metal shroud, blackLSB = long shroud, blackBE = beam elongatorCS = crystal spreaderELB = eggcrate louver, blackIR = infrared filterMS = mistlite spreaderUV = ultraviolet filterLH = accessory holder
speCIfICatIon
FR SM SMB SC SCB
SH SHB BE CS
ELB IR MS UV LH
adjustable9.5”(241.3mm) min17” (432mm) max.
2-3/8”(60.325mm)
1-7/8”(47.6mm)
LSB
80 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
speCIfICatIon
X31 Halogen / LED Spotlight
50W max.
Lamp MR16, 50W max, cover glass recommended (gE constant current color lamp cannot be used with glass shade). Also compatible with LED MR16 lamps. SORAA LED MR16 lamps (10W max.) are recommended.
Sec. Voltage 12V (fixture)
Material Solid brass with durable electroplated finish.
Mounting Canopy, rail, and cable systems.
Rating Dry locations.
DCCS HD SF SR VDC1M C3 C4
Shade & Accessories: (see page 85 for details)
C1 canopy mount
Shown with SORAA LED MR16 lamp (10W max.)
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyCS = cable systemDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
Code Mount shade* antenna accessories** finish
X31 - 17 -
NS = no shadeSC = solid metal capSCB = solid metal cap, blackPC = perforated metal capPCB = perforated metal cap, blackSM = solid metal coneSMB = solid metal cone, blackPM = perforated metal conePMB = perforated metal cone, blackFR = frosted glass coneAM = amber glass coneBL = blue glass cone
MA = mesh arc
17 = 9-3/4” to 16-1/2”
(248mm to 419mm)MC = matte chromeNA = no accessory
SH = metal shroud
SHB = metal shroud, black
ELB = eggcrate louver, black
BE = beam elongator
CS = crystal spreader
IR = infrared filter
MS = mistlite spreader
UV = ultraviolet filter
LSB = long shroud, black
LH = accessory holder***- Multiple accessories can be selected.- Accessory holder required with accessories
6-1/4” (158.75mm)max.
LSB
81MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
MOUNTING OPTIONS
speCIfICatIon
X42 Halogen / LED Spotlight
50W max.
Lamp MR16, 50W max, cover glass recommended (gE constant current color lamp cannot be used with glass shade). Also compatible with LED MR16 lamps. SORAA LED MR16 lamps (10W max.) are recommended.
Sec. Voltage 12V (fixture).
Material Solid brass with durable electroplated finish.
Mounting Canopy and rail systems.
Rating Dry locations.
Note: Dimensions above reflect a 2” stem. Custom length available in 1” increments. Maximum length for ceiling is 96” and 16” for SF mount.
DC HD SF SR VDC1M C3 C4
SH SHB BE CS
ELB IR MS UV LH
Shade & Accessories: (see page 85 for details)
C1 canopy mount
Shown with SORAA LED MR16 lamp (10W max.)
speCIfICatIon
Code Mount shade stem* accessories finish
X42 - -
2= 2” (51mm)X= custom length
NS = no shadeSC = solid metal capSCB = solid metal cap, black
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
NA = no accessorySH = metal shroudSHB = metal shroud, blackELB = eggcrate louver, blackBE = beam elongatorCS = crystal spreaderIR = infrared filterMS = mistlite spreaderUV = ultraviolet filterLH = accessory holder
*Custom length available in 1”(25.4mm) increments.
- Multiple accessories can be selected.- Accessory holder required with accessories
MC = matte chromeBN = brushed nickel
6-1/2”(165.1mm)max.
LSB
82 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
speCIfICatIon
SH SHB BE CS
ELB IR MS UV
X43 Halogen / LED Spotlight
50W max.
Lamp MR16, 50W max, cover glass recommended. Also compatible with LED MR16 lamps. SORAA LED MR16 lamps (10W max.) are recommended.
Sec. Voltage 12V (fixture).
Material Solid brass with durable electroplated finish.
Mounting Canopy, rail, and cable systems.
Rating Dry locations.
Note: Dimensions above reflect a 2” (50.8mm) stem. Custom length available in 1”(25.4mm) increments. Maximum length for ceiling is 96”(2.43m) and 16”(406.4mm) for SF mount.
CSDCHDSFSRVD C1MC3C4
Shade & Accessories: (see page 85 for details)
C1 canopy mount
Code Mounting shade stem accessories* finish
X43 - NS -
C1M = Ø2-3/8”(60mm) x 1/4”(6.35mm) canopy, retrofit mounting plate
C3 = Ø4-5/8”(117mm) x 1/4”(6.35mm) canopy
C4 = 4-5/8” (117mm) x 1/4”(6.35mm) canopyCS = cable systemDC = dual circuitHD = horizontal double railSR = single railVD = vertical double rail
N = no shade available MC = matte chromeBN = brushed nickelWI = wrought iron
*Multiple accessories can be selected.
2 = 2” (51mm)X = custom length
NA = no accessorySH = metal shroudSHB= metal shroud, blackELB = eggcrate louver, blackBE = beam elongatorCS = crystal spreaderIR = infrared filterMS = mistlite spreaderUV = ultraviolet filter
7-1/2”(191mm)max.
2-3/4”(70mm)
FR SM SMB SC SCB
SH SHB BE CS
ELB IR MS UV LH
LSB
83MP LIGHTING PRODUCT CATALOGUE
speCIfICatIon
MOUNTING OPTIONS
speCIfICatIon
X45 Halogen
50W max.
Lamp MR16, 50W max, cover glass recommended (gE constant current color lamp cannot be used with glass shade). Not recommended for use with LED MR16 lamps. All lamps sold separately.
Sec. Voltage 12V (fixture).
Material Solid brass with durable electroplated finish.
Mounting Canopy, rail, and cable systems.
Rating Dry locations.
Note: Dimensions above reflect a 2”(50.8mm) stem. Custom length available in 1”(25.4mm) increments. Maximum length for ceiling is 96”(2.43m) and 16”(406.4mm) for SF mount.
DC HD SF SR VDC1M C3 W3C4
Shade & Accessories: (see page 85 for details)
C1 canopy mount
Shown with FR shade
speCIfICatIon
Code Mount shade stem accessories* pri.Voltage finish
X45 - -
2 = 2” (51mm)X = custom length
Custom length available in 1”(25.4mm) increments. Maximum length for ceiling is 96”(2.43m) and 16”(406.4mm) for SF mount.
NS = no shadeSC = solid metal capSCB = solid metal cap,
blackSM = solid metal coneSMB = solid metal cone, black
NA = no accessorySH = metal shroudSHB= metal shroud, blackELB = eggcrate louver, blackBE = beam elongatorCS = crystal spreaderIR = infrared filterMS = mistlite spreaderUV = ultraviolet filterLSB = long shroud, blackLH = accessory holder**
MC = matte chromeBN = brushed nickel
1 = 120V2 = 277V4 = 230V~240V* For C3 & C4 mount only.
C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate
C3 = Ø4-5/8” x 1/4” canopyC4 = 4-5/8”sq.(117mm) x
1/4”(6mm) canopyCD = 5-7/8”sq.(149mm) x
1-1/2”(31mm) canopyDC = dual circuit railHD = horizontal double railSF = single rail flush wallSR = single railVD = vertical double railW3= W3 canopyWK = WK canopy
*Multiple accessories can be selected.**Accessory holder required with accessories.
note: Shades are not recom-mended with LeD lamps.
6”(152.4mm)max.
Ø2-1/2”(64mm)
SH SHB
BE CS ELB
LSB
84 MP LIGHTING PRODUCT CATALOGUE
MOUNTING OPTIONS
Note: Dimensions above reflect a 2” stem. Custom length available in 1” increments. Maximum length for ceiling is 96” and 16” for SF mount.
X51 Halogen / LED Spotlight
50W max.
Lamp MR16, 50W max, cover glass recommended (gE constant current color lamp cannot be used with glass shade). Also compatible with LED MR16 lamps. SORAA LED MR16 lamps (10W max.) are recommended.
Sec. Voltage 12V (fixture).
Material Solid brass with durable electroplated finish.
Mounting Canopy and rail systems.
Accessories Metal cap and shroud are included. Other accessories sold separately.
Rating Dry locations.
DCSFSR C1MC3C4
SC SCB
IR MS
UV LH
Shade & Accessories: (see page 85 for details)
C1 canopy mount
Code Mount shade stem accessories** pri.Voltage finish
X51 - -
NC = no capSC = solid metal capSCB = solid metal cap,
black
2 = 2” (51mm)X = custom length (Custom length available in 1” increments. Maximum length for ceiling is 96” and 16” for SF mount.)
MC = matte chromeBN = brushed nickelBA = black anodized
1 = 120V2 = 277V4 = 230V~240V* For C3 & C4 mount only.
NA = no accessorySH = metal shroudSHB= metal shroud, blackELB = eggcrate louver, blackBE = beam elongatorCS = crystal spreaderIR = infrared filterMS = mistlite spreaderUV = ultraviolet filterLSB = long shroud, black
** Multiple accessories can be selected.
C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate
C3 = Ø4-5/8” x 1/4” canopyC4 = 4-5/8”sq. x 1/4” canopyDC = dual circuit railSF = single rail wall flushSR = single rail
speCIfICatIon
85MP LIGHTING PRODUCT CATALOGUE
RESOURCES
ACCS - HEX1 - finish
ACCS - HEX2 - finish
ACCS - NL shroud - finishACCS - L shroud - finish
ACCS - LH - finish
SHADE - FR
ACCS - finish
ACCS - finishACCS - LSB
ACCS - BE
ACCS - CS
ACCS - filter
ACCS - MS
ACCS - ELB
ACCS - CB1
CB1 =cross baffle, black anodized
HEX1 = hex louver
HEX2 = hex louver
LH = holder
FR = frosted
HS = half shroud
FS = full shroud
NS = no shroudHS = half
shroudFS = full
shroud
NL = no lens
L = with lens
SH = metal shroudSHB = metal shroud, black
LSB = long shroud, black
BE = beam elongator
CS = crystal spreader
IR = infrared filterUV = ultraviolet filter
MS = mistlite spreader
ELB = eggcrate louver, black
MA = matte clear anodizedBA =black anodized
MA = matte clear anodized
BA =black anodizedWH =whiteBZ =bronze
MA = matte clear anodized
BA =black anodizedWH =whiteBZ =bronze
MA = matte clear anodizedBA =black anodized
LM = angle louver, matte clear anodized
LB = angle louver, black anodized
MC = matte chromeBN = brushed nickelBA = black anodized
Accessories & shAdes in-grade & spotlight & winerack
For use with L01~L04
For use with L05
For use with L51, L52, L64, L65 & L182
For use with L221, L223 & X family spotlight
For use with L221, L223 & X family spotlight
For use with L51, L52, L64, L65 & L182
For use with L134
For use with L01~L04
2-3/4”
2-3/4”
2-3/8”
2-3/8”
3-1/8”
3-1/8”
2-7/8”
2-1/2”2”
drop
drop
offset
86 MP LIGHTING PRODUCT CATALOGUE
LineAr hArdwAreLinear system
SDF070 - MC
SDF060 - drop - MC
SHADE - SM - finish
SHADE - SC - finish
SHADE - SMB
SHADE - SCB
SDF062 - drop - MC
SDF061 - offset option - MC
SDF071 - MC
MC = matte chrome
MC = matte chrome
SMB = solid metal cone, black
SCB = solid metal cap, black
SM = solid metal cone
SC = solid metal cap
MC = matte chrome
MC = matte chrome
MC = matte chromeBN = brushed nickel
MC = matte chromeBN = brushed nickel
24 = 24”(610mm)X = custom
24 = 24”(610mm)X = custom
12 = 12”(305mm)X = custom
S = swivel(for slop ceiling application)
MC = matte chrome
Fixed angle wall mount stand-offSuggested 1’ from end and spacing 4’ on center. For use with L103 & L104.
Cable stand-off suspension setSuggested 1’ from end and spacing 4’ on center. Available with custom swivel for sloped ceiling applications. For use with L103 & L104.
Cable stand-off suspension setSuggested 1’ from end and spacing 4’ on center. Available with custom swivel for sloped ceiling applications. For use with L111.
Rod stand-off suspension setØ1/4” rod. Suggested 1’ from end and spacing 4’ on center. Available with custom swivel for sloped ceiling applications. Maximum offset angle ±30°. For use with L103 & L104.
Adjustable angle wall mount stand-offFixes to appropriate end-plate (supplied with fixture). Maximum angle ±100° from horizontal. For use with L104, L106 & L111 (max 8’ long).
Accessories & shAdes spotlight
drop
drop
drop
drop
drop
offset
offset
87MP LIGHTING PRODUCT CATALOGUE
LineAr hArdwAreLinear system
SDF065 - drop - MC
CPY054 - drop - MC
CPY053 - drop - MC
CPY052 - drop - MC
CPY055 - drop - MC
MC = matte chrome
MC = matte chrome
MC = matte chrome
MC = matte chrome
MC = matte chrome
24 = 24”(610mm)X = custom
15 = 15”(381mm)X = custom
12 = 12”(305mm)X = custom
12 = 12”(305mm)X = custom
15 = 15”(381mm)X = custom
Cable stand-off suspension setSuggested 1’ from end and spacing 4’ on center. Suitable for sloped ceiling applications. For use with L112.
Round canopy with cableCan be mounted to flat or sloped ceilings. For use with L112.
Square canopy with cableCan be mounted to flat or sloped ceilings. For use with L112.
Round flexible power canopyUsed with remote driver to power system. Cord cannot be used as a support. Can be used as a power feed for wall mount or sloped ceiling applications. For use with L103, L104 & L111
Square flexible power canopyUsed with remote driver to power system. Cord cannot be used as a support. Can be used as a power feed for wall mount or sloped ceiling applications. For use with L103, L104 & L111
SDF064 - offset option - MC
MC = matte chrome12 = 12”(305mm)X = custom
S = swivel(for slop ceiling application)
Rod stand-off suspension setØ7/16” rod. Suggested 1’ from end and spacing 4’ on center. Available with custom swivel for sloped ceiling applications. Maximum offset angle ±14°. For use with L111.
SDF063 - offset option - MC
MC = matte chrome12 = 12”(305mm)X = custom
S = swivel(for slop ceiling application)
Rod stand-off suspension setØ1/4” rod. Suggested 1’ from end and spacing 4’ on center. Available with custom swivel for sloped ceiling applications. Maximum offset angle ±30°. For use with L111.
88 MP LIGHTING PRODUCT CATALOGUE
Led driversdriver enclosures & dimmable constant current
LED15W3502i LED15W3502iB (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 18W max.AC input voltage 120~277V, 50/60HzDC output voltage 50V MaxDC output current 350mADimming 0~10VDimension 3-7/8”(98.4mm) x 1-5/8”(41.28mm) x 1”(25.4mm)Approval Damp and dry locations
Recommended use 2-10 x 1W LEDs in series
LED16W350i LED16W350iB (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 16.8W max.AC input voltage 120V, 60HzDC output voltage 30V~48VDC output current 350mADimming Triac & ELV dimmableDimension 3-3/8”(85.73mm) x 2-3/8”(60.3mm) x 1-1/4”(32mm)Approval Damp and dry locations
Recommended use Replacement driver for L141 (high lumen) and L144
LED16W700i LED16W700iB (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 16.8W max.AC input voltage 120V, 60HzDC output voltage 16V~24VDC output current 700mADimming Triac & ELV dimmableDimension 3-3/8”(85.7mm) x 2-3/8”(60.3mm) x 1-1/4”(32mm)Approval Damp and dry locations
Recommended use Optional ELV driver for L141 (std lumen)
LED18W350i LED18W350iB (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 18W max.AC input voltage 120V~277V, 50/60HzDC output voltage 4V~52VDC output current 350mADimming Dimmable with ELV dimmerDimension 5-1/2”(140mm) x 1-5/8”(41.3mm) x 1-1/4”(32mm)Approval Outdoor rated
Recommended use 2-12 x 1W LEDs in series
LED18W700i LED18W700iB (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 18W max.AC input voltage 120V~277V, 50/60HzDC output voltage 4V~26VDC output current 700mADimming Dimmable with ELV dimmerDimension 5-1/2”(140mm) x 1-5/8”(41.3mm) x 1-1/4”(32mm)Approval Outdoor rated
Recommended use 2-6 x 2.5W LEDs in series
LED20W700i LED20W700iB (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 20W max.AC input voltage 120V, 60HzDC output voltage 5.6V~24VDC output current 700mADimming 0~10VDimension 3”(76mm) x 3-1/4”(83mm)x 1-3/8”(35mm)Approval Damp and dry locations
Recommended use 2-6 x 2.5W LEDs
Dimmable Constant Current
Dimmable Constant Current
Driver Enclosures
EBX-160-ZP
LED driver enclosureFinish Zinc platedDimension 6-1/4”(169mm) x 5”(127mm) x 2”(51mm)Approval Damp and dry locations
(comes with barrier for class ll wiring)
EBX-260-ZP
LED driver enclosureFinish Zinc platedDimension 10-1/4”(260.4mm) x 5”(127mm) x 2-3/4” (70mm)Approval Damp and dry locations
(comes with barrier for class ll wiring)
89MP LIGHTING PRODUCT CATALOGUE
TLDDLV60W5000 TLDDLV60W5000B (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 60W max.AC input voltage 120V~277V, 50/60HzDC output voltage 12VDC output current 100mA~5000mADimming 0~10V with TLC010iDimension 9-3/8”(238.1mm) x 1-3/4”(44.5mm) x 1-1/4”(32mm)IP 66Approval Outdoor rated
Recommended use 2-12 x 3W fixtures
TLDDLV100W4100 TLDDLV100W4100B (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 100W max.AC input voltage 120V~277V, 50/60HzDC output voltage 24VDC output current 100mA~4100mADimming 0~10V with TLC010iDimension 9-3/8”(238.13mm) x 1-3/4”(44.5mm) x 1-1/4”(32mm)IP 66Approval Outdoor rated
Recommended use L102, L107, and L121
TLDAV60W9V TLDAV60W9VB (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 60W max.AC input voltage 120V~240V, 47~63HzDC output voltage 8.7V~10.5VDC output current 0mA~5000mADimming 0~10V with TLC010iDimension 7-7/8”(200mm) x 2-3/4”(70mm) x 1-3/8”(35mm)IP 64Approval Outdoor rated
Recommended use 2-12 x 3W fixtures and 2-6 x 7W fixtures
TLDAV60W12V TLDAV60W12VB (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 60W max.AC input voltage 100V~240V, 47~63HzDC output voltage 10.8V~13.2VDC output current 0mA~5000mADimming 0~10V with TLC010iDimension 7-7/8”(200mm) x 2-3/4”(70mm)x 1-3/8”(35mm)IP 64Approval Outdoor rated
Recommended use 2-12 x 3W fixtures and 2-6 x 7W fixtures
Dimmable Constant Voltage (Dimmable with 0~10V controller, sold separately)
TLDDLV60W24Vi TLDDLV60W24ViB (with EBX-160-Zp enclosure)
Non-dimmable constant voltageOutput wattage 60W max.AC input voltage 120V~277V, 50/60HzDC output voltage 24VDC output current 240mA~2500mADimming 0~10V (built in)Dimension 6-3/4”(171.4mm) x 3/4”(19mm) x 1-1/4”(32mm)Approval Dry location
Recommended use Linear fixtures
TLDAV100W12V TLDAV100W12VB (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 60W max.AC input voltage 100V~277V, 47~63HzDC output voltage 10.2V~12VDC output current 3750mA~5000mADimming 0~10V with TLC010iDimension 7-7/8”(200mm) x 2-3/4”(70mm)x 1-3/8”(35mm)IP 64Approval Outdoor rated
Recommended use 2-6 7W fixtures
Dimmable Constant Voltage (Dimmable with 0~10V controller, sold separately)
Led driversdimmable constant voltage & dimming controller
TLDAV100W15V TLDAV100W15VB (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 75W max.AC input voltage 100V~277V, 47~63HzDC output voltage 12.8V~15VDC output current 3750mA~5000mADimming 0~10V with TLC010iDimension 7-7/8”(200mm) x 2-3/4”(70mm)x 1-3/8”(35mm)IP 64Approval Outdoor rated
Recommended use 1-6 x 10W fixtures and 1-18 x 4W fixtures
TLDAV100W20V TLDAV100W20VB (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 96W max.AC input voltage 100V~277V, 47~63HzDC output voltage 17V~20VDC output current 3600mA~4800mADimming 0~10V with TLC010iDimension 7-7/8”(200mm) x 2-3/4”(70mm)x 1-3/8”(35mm)IP 64Approval Outdoor rated
Recommended use L72, L73, L76, L96, L98, L99 and linear systems
TLDAV100W24V TLDAV100W24VB (with EBX-260-Zp enclosure)
Dimmable constant voltageOutput wattage 96W max.AC input voltage 100V~277V, 47~63HzDC output voltage 20.4V~24VDC output current 3000mA~4000mADimming 0~10V with TLC010iDimension 7-7/8”(200mm) x 2-3/4”(70mm)x 1-3/8”(35mm)IP 64Approval Outdoor rated
Recommended use L72, L73, L76, L96, L98, L99 and linear systems
TLC010i TLC010iB (with EBX-160-Zp enclosure)
Dimming controllerInput Voltage 12V~24V DCDC output voltage 12V~24VDC output current 5000mA max. at 12V, 4100mA max. at 24VDimming 0~10VDimension 5-1/8”(130.1mm) x 1-3/8”(35mm) x 1”(25.4mm)IP 64Approval Outdoor rated
Recommended use Diming module for use with 12V or 24V constant voltage drivers.
Dimming Controller
90 MP LIGHTING PRODUCT CATALOGUE
Led driversnon-dimmable constant current
LED3W350L LED3W350LB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 3.5W max.AC input voltage 100V~240V, 50/60HzDC output voltage 3V~12VDC output current 350mADimension 2-5/8”(66.7mm) x 1-3/8”(35mm) x 7/8” (22.2mm)Approval Dry location
Recommended use 1-2 x 1W LEDs
LED3W350 LED3W350B (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 3W max.AC input voltage 100V~240V, 50/60HzDC output voltage 3V~12VDC output current 350mADimension 1-7/8”(47.63mm) x 1-5/8”(41.3mm) x 7/8”(22.2mm)Approval Dry location
Recommended use 1-2 x 1W LEDs
LED3W700 LED3W700B (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 6W max.AC input voltage 100V~240V, 50/60HzDC output voltage 3V~12VDC output current 700mADimension 1-7/8”(47.63mm) x 1-5/8”(41.3mm) x 7/8”(22.2mm)Approval Dry location
Recommended use 1 x 2.5W LED
LED6W350D LED6W350DB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 6W max.AC input voltage 120V~277V, 50/60HzDC output voltage 2V~20VDC output current 350mADimension 2-3/8”(60.3mm) x 1-3/4”(44.5mm) x 1”(2Approval Damp and dry locations
Recommended use 1-3 x 1W LEDs
LED6W700D LED6W700DB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 6W max.AC input voltage 120V~277V, 50/60HzDC output voltage 2V~11VDC output current 700mADimension 2-3/8”(60.3mm) x 1-3/4”(44.5mm) x 1”(25.4mm)Approval Damp and dry locations
Recommended use 1-2 x 2.5W LEDs
LED8W350L LED8W350LB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 8W max.AC input voltage 100V~240V, 50/60HzDC output voltage 3V~36VDC output current 350mADimension 2-5/8”(66.7mm) x 1-3/8”(35mm) x 7/8”(22.2mm)Approval Dry location
Recommended use 2-6 x 1W LEDs
LED9W700L LED9W700LB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 9W max.AC input voltage 100V~240V, 50/60HzDC output voltage 3V~21VDC output current 700mADimension 2-5/8”(66.7mm) x 1-3/8”(35mm) x 7/8”(22.2mm)Approval Dry location
Recommended use 1-3 x 2.5W LEDs
LED10W350D LED10W350DB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 10W max.AC input voltage 120V, 60HzDC output voltage 2.8V~28VDC output current 350mADimension 5-1/8”(130.2mm) x 1-3/8”(35mm) x 1”(25.4mm)Approval Outdoor rated
Recommended use 2-7 x 1W LEDs
LED17W700D LED17W700DB (with EBX-160-Zp enclosure)
Non-dimmable constant currentOutput wattage 17W max.AC input voltage 120V, 60HzDC output voltage 2.8V~24VDC output current 700mADimension 5-1/8”(130.2mm) x 1-3/8”(35mm) x 1”(25.4mm)Approval Outdoor rated
Recommended use 2-6 x 2.5W LEDs
Non-Dimmable Constant Current
Non-Dimmable Constant Current
LED20W700D277 LED20W700D277B (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 20W max.AC input voltage 277VV, 60HzDC output voltage 2.8V~28VDC output current 700mADimension 5-1/8”(130.2mm) x 1-3/8”(35mm) x 1”(25.4mm)Approval Outdoor rated
Recommended use 2-6 x 2.5W LEDs
91MP LIGHTING PRODUCT CATALOGUE
LED25W1050 LED25W1050B (with EBX-160-Zp enclosure)
Dimmable constant currentOutput wattage 25W max.AC input voltage 120V, 60HzDC output voltage 5.6V~24VDC output current 1050mADimension 3-1/4”(83mm) x 3”(76mm) x 1-3/8”(35mm)Approval Dry locations
Recommended use Wine rack
Led driversnon-dimmable constant current/voltage & emergency driver
Non-Dimmable Constant Current Non-Dimmable Constant Voltage
TLD12012V12W1 TLD12012V12W1B (with EBX-160-Zp enclosure)
Non-dimmable constant voltageOutput wattage 12W max.AC input voltage 120V, 50/60HzDC output voltage 12VDC output current 100mA~1000mADimension 5-1/8”(130.2mm) x 1-3/8”(35mm) x 1-1/4”(32mm)Approval Outdoor rated
Recommended use L06 & L07 fixtures, 6 minimum, 40 maximum
TLDDLV10W12V TLDDLV10W12VB (with EBX-160-Zp enclosure)
Non-dimmable constant voltageOutput wattage 10W max.AC input voltage 100V~240V, 50/60HzDC output voltage 12VDC output current 830mADimension 2-5/8”(66.7mm) x 1-3/8” (35mm) x 7/8”(22.25mm)Approval Dry locations
Recommended use 1-35 L06 and L07
Emergency Driver Constant Voltage
LED4W410E
Emergency constant currentOutput wattage 3.5W max.AC input voltage 120V/277V, 60HzDC output voltage 3V~20VDC output current 200mADimension 9-3/8”(238.1mm) x 2-3/8”(60.3mm) x 1-1/2”(38mm)Approval Damp and dry locations
LED23W700E
Emergency constant currentOutput wattage 23W max.AC input voltage 120V~277V, 50/60HzDC output voltage 28V~33VDC output current 700mADimension 9-3/8” (238.13mm) x 2-1/3”(59mm) x 1”(25.4mm)Approval Damp and dry locations
LED25W210E
Emergency constant currentOutput wattage 20W max. (US) 25W max. (Canada)AC input voltage 120V or 277V, 60HzDC output voltage 120/277VDC output current 165 or 210mA (120V) 72 or 90mA (277V)Dimension 16-5/8”(422.3mm) x 2-7/8”(73mm) x 2-7/8”(73mm)Approval Damp and dry locations
92
Led drivers & TrAnsformerssurface mount constant voltage driver & magnetic Transformer
Surface Mount Driver Constant Voltage
SLD - 100W dimming offset - MC
MC = matte chromeS12 = 12”(305mm) stem
SX = custom stemF15 = 15”(381)
flexible cordFX = custom
flexible cord
100W = 100W D = dimmableN = non-dimmable
Mounts to standard octagonal box. Used to power single circuit of system. 100% duty cycle. Integral push button circuit breaker.
120V~277V input.
Comes with 24V LED driver. Also can be used as a power feed for wall mount or sloped ceiling applications, if flexible cord option is chosen. Stem or cord cannot be used as a support.
For use with L103, L104 & L111.
Approval Dry locations.
TLW120M10 TLW120M10B (with EBX-160-Zp enclosure)
Magnetic transformerOutput wattage 10W max.AC input voltage 120V, 60HzAC output voltage 12VDimming Yes (with magnetic dimmer)Dimension Ø2-1/2”(64mm) x 1-1/4”(32mm)Approval Dry locations
TLW120MT050 TLW120MT150
Magnetic transformerOutput wattage 50W or 150W max.AC input voltage 120V, 60HzAC output voltage 12VDimming Yes (with low voltage magnetic dimmer)Dimension 3”(76.2mm) x 2-7/8”(73mm) x 5-5/8”(143mm)Approval Dry locations
TLW120MII300
Magnetic transformerOutput wattage 300W max.AC input voltage 120V, 60HzAC output voltage 11.5VDimming Yes (with low voltage magnetic dimmer)Dimension 7”(178mm) x 3-1/8”(79.4mm) x 7-1/8”(181mm)Approval Dry locations
Recommended use For use with monopoint fixtures with C1 or C2 canopy
TLW120MT600
Magnetic transformerOutput wattage 600W max.AC input voltage 120V, 60HzAC output voltage 12VDimming Yes (with low voltage magnetic dimmer)Dimension 4”(102mm) x 4-3/4”(121mm) x 7-7/8”(200mm)Weight 13 lbsApproval Dry locations. UL listed
TLW120MT300
Magnetic transformerOutput wattage 300W max.AC input voltage 120V, 60HzAC output voltage 12VDimming Yes (with low voltage magnetic dimmer)Dimension 3-3/8”(85.7mm) x 3-1/8”(79.3mm) x 7-1/8”(181mm)Weight 7 lbsApproval Dry locations. UL listed
Magnetic Transformers
93
TrAnsformersmagnetic & electronic Transformer
TLW277MII300
Magnetic transformerOutput wattage 300W max.AC input voltage 277V, 60HzAC output voltage 11.5VDimming Yes (with low voltage magnetic dimmer)Dimension 7”(178mm) x 3-1/8”(79.4mm) x 7-1/8”(181mm)Approval Dry locations
TLW277MT300
Magnetic transformerOutput wattage 300W max.AC input voltage 277V, 60HzAC output voltage 12VDimming Yes (with low voltage magnetic dimmer)Dimension 3-3/8”(85.7mm) x 3-1/8” (79.4mm) x 7-1/8”(181mm)Weight 7 lbsApproval Dry locations. UL listed
TLW277MT600
Magnetic transformerOutput wattage 600W max.AC input voltage 277V, 60HzAC output voltage 12VDimming Yes (with low voltage magnetic dimmer)Dimension 4”(102mm) x 4-3/4”(120.7mm) x 7-7/8”(200mm)Weight 13 lbsApproval Dry locations. UL listed
TLW277E75
Electronic transformerOutput wattage 75W max.AC input voltage 277V, 50/60HzAC output voltage 12VDimming Yes (with low voltage electronic dimmer)Dimension 2-1/2”(64mm) x 1-1/4” (32mm) x 3/4”(19mm) Weight 1 lbsApproval Dry locations.
TLW120E75
Electronic transformerOutput wattage 75W max.AC input voltage 120V ± 10%, 50/60HzAC output voltage 12VDimming Yes (with low voltage electronic dimmer)Dimension 2-3/4”(70mm) x 1-1/4”(32mm) x 3/4”(19mm) Weight 0.16 lbsApproval Dry locations.
TLW120E150 TLW120E150B (with EBX-260-Zp enclosure)
Electronic transformerOutput wattage 150W max.AC input voltage 120V, 60HzAC output voltage 12VDimming Yes (with low voltage electronic dimmer)Dimension 4-3/8”(111.1mm) x 1-7/8”(47.6mm) x 1-1/8”(29mm) Weight 1 lbsApproval Dry locations.
Magnetic Transformers
Electronic Transformers
94
TechnicAL informATionmounting & finishing options
CSCable system12V MP Lighting rail system.
1C (120V only)1-circuit trackAvailable in MP track, Lightolier, Halo, and Juno.
MBØ1-5/8” mounting bracketBracket mounts to ceiling or wall.
3CT (120V only)3-circuit trackTrack sold separately. 3-circuit switch selectable (circuit 1, 2, 3, or off).
2CT (120V & 277V)2-circuit trackTrack sold separately. 2-circuit switch selectable (circuit 1, 2, or off).
DCDual circuit rail12V/24V MP Lighting rail system.
HDHorizontal double rail12V/24V MP Lighting rail system.SFSingle rail flush wall12V/24V MP Lighting rail system.
SRSingle rail12V/24V MP Lighting rail system.
VDVertical double rail12V/24V MP Lighting rail system.
C1MØ2-3/8”(60.3mm) x 1/4”(6.4mm) canopyRetrofit to existing standard octagonal box using custom mounting plate (included) with screws.
C1MØ2-3/8”(60.3mm) x 1/4”(6.4mm) canopyRetrofit to existing standard octagonal box using custom mounting plate (included) with screws.
C7Ø6-5/16”(160.3mm) x 2-3/8”(60.3mm) canopyMounts to standard octagonal box (not included).
C9Ø4-13/16”(122.2mm) x 11/16”(17.5mm) canopyMounts to standard octagonal box (not included).
C3Ø4-5/8”(117.5mm) x 1/4”(6.4mm) canopyMounts to standard octagonal box (not included).
C3Ø4-5/8”(117.5mm) x 1/4”(6.4mm) canopyMounts to standard octagonal box (not included).
WKØ2”(51mm) x 3/4”(19mm) wall hookComes with 6-7/8”(174.6mm) standard vertical stem.
C44-5/8”(117.5mm) Sq. x 1/4”(6.4mm) canopyMounts to standard J-box (not included).
Canopy Mounts Rail Systems
120V / 277V Mult-Track Systems
Others Finishing Options
Wall Mounts
Black anodizedPowder coated blackBrushed nickelBronzeMatte chrome / Matte clear anodizedMatte pewterSilverStainless steel 316White
95MP LIGHTING PRODUCT CATALOGUE
TechnicAL informATionProtection class (iP rating) + explanation of symbols
First Digit indicates the level of protection against solid object
Explanation of Symbols
Second Digit indicates the level of protection against liquid
0 — No protection against contact and ingress of objects.
1 >2” object size Any large surface of the body, such as the back of hand, but no protection against deliberate contact with a body part.
2 >1/2” object size Fingers or similar objects.
3 >3/32” object size Tools, thick wires, etc.
4 >1/32” object size Most wires, screws, etc.
5 Dust protected Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact.
6 Dust tight No ingress of dust; complete protection against contact.
0 Not protected —
1 Dripping water Dripping water (vertically falling drops) shall have no harmful effects.
2 Dripping water when tilted up to 15° Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.
3 Spraying water Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effects.
4 Splashing water Water splashing against the enclosure from any direction shall have no harmful effects.
5 Water jet Water projected by a nozzle against enclosure from any direction shall have no harmful effects.
6 Powerful water jet Water projected in powerful jets against the enclosure from any direction shall have no harmful effects.
7 Immersion up to 3’-15/16” Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 3’-15/16”) of submersion.
8 Immersion beyond 3’-15/16” The equipment is suitable from continuous immersion in water under conditions which shall be specified by the manufacturer.*
Component approved to US and Canadian
standards by UL
Component approved Canadian standards
by UL
Component approved US standards by UL
Approved to US and Canadian standards
by CSA
Component approved to US and Canadian standards
by CSA
Approved to European standards
Approved to US and Canadian standards
by UL
* Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that produces no harmful effects.
96
Terms & condiTions of sALe
Quote AssistanceMP Lighting does not guarantee the availability of any item listed and reserves the right to discontinue or change the technical or design specifications of its products at any time without notice. To ensure accuracy and to expedite your order, please order by part number. Quote requests may be faxed to 604-708-1185 or emailed to [email protected] but will not be issued over the phone. If you do not see what you’re looking for, please inquire. Our representatives and in-house design team can assist you with your specifications. Allow longer lead time for custom quoted items. Quotes are valid for 3 months from date of issue.
PricingAll prices are retail prices and do not include shipping, handling, taxes, or installation. Pricing for the United Kingdom and Europe are inclusive for shipping, handling and taxes except installation. Prices are subject to change without notice and we reserve the right to correct errors. Please contact MP Lighting for details. Merchandise supplied against a properly accepted quotation from MP Lighting will be shipped at the quoted price. All other merchandise will be charged at the price ruling on the date of dispatch. In the event of discrepancy between the prices on a customer’s purchase order and the invoiced price, MP Lighting’s price ruling at the date of dispatch will be deemed correct. Claims arising from MP Lighting’s invoices must be advised in writing within 10 days following receipts, otherwise the invoice will be deemed correct. Late claims will not be accepted.
Minimum Order ChargeThe minimum order is $100.00 net. A Service Charge of $25.00 will be added to all original customer orders less than $100.00 net.
FreightF.O.B. MP Lighting Factory. Prepaid and charge shipping costs are Freight Company’s quoted estimates PLUS 15% administration fee to cover any shipping charge overruns, brokerage, customs charges and handling fees. For European or UK based orders, shipping cost are included in the purchase price. This is non-negotiable and non-refundable. To avoid this fee, customers may provide their own courier or freight account number and will be responsible for additional charges from US customs. Shipping raw materials or replacement parts outside Canada may incur duty charges and/or taxes. Duty charges are calculated as $25.00 (fixed) plus 12% of the value of parts purchased. Shipments must be inspected on receipt. Any discrepancies must be advised to MP Lighting in writing within 5 days of receipt. Late claims will not be accepted.
Payment TermsNet 30 days with prior approved credit otherwise a 50% deposit with order and the balance in full prior to shipping. A service charge of 2% per month, compounded monthly, will be added to all past due amounts, except where prohibited by law. For
credit applications, contact Accounts Receivable.
Return PolicyReturn requests must be made within 60 days of the receipt of goods and require an RGA (Return Goods Authorization) number. Returns without an RGA will be refused and returned at your expense. MP Lighting will only accept the return of uninstalled products that are in saleable condition and are free of damages, scratches, and alterations. RGA numbers can be obtained by fax request at 604-708-1185 Attention: Customer Service, or by email request at [email protected].
All returns are subject to a minimum 25% restocking fee for low and line voltage products and a 50% restocking fee for all LED products. We will not accept returns on custom orders* or purchase overruns. Goods must be returned prepaid with RGA number clearly marked on returning packages. RGA’s are valid for 30 days from issue date to the time products are received at our factory. Expired RGA’s will be refused and returned at your expense. Credit will be issued at the sole discretion of MP Lighting. No credit will be issued on defective products due to improper installation or misuse.
*Custom orders may include, but are not limited to, irregular track lengths and off-site work, such as metal fabrications or custom colors. A 50% non-refundable deposit is required for all custom orders. Custom orders cannot be cancelled after Release of Order. Custom materials cannot be returned except for defects proven to be the manufacturer’s responsibility.
CancellationsCancellation of orders must be made by fax or email without delay and may be subject to restocking, service and other fees. All orders that are in progress or completed, and are cancelled by the customer will be subject to a minimum 25% restocking charge.
Installation Disclaimer MP Lighting assumes no responsibility for the installation of their products. Installation of these products should only be made by licensed personnel in accordance with provided instructions. The use of these products should meet all regulatory codes and requirements.
ApprovalMP Lighting systems are approved to US and Canadian standards by CSA and to Europe and the UK standards by CE.
MP LIGHTING PRODUCT CATALOGUE
97
wArrAnTy
One Year Limited Warranty – Low Voltage and Line Voltage SystemsFive Year Limited Warranty – LED Products and Drivers*Note: Lamps are not covered by warranty
MP DESIGN INC. (hereinafter referred to as “MP Lighting”) gives the following warranty for each new MP Lighting product distributed worldwide by MP Lighting and sold through an authorized MP Lighting Distributor. MP Lighting warrants that all products manufactured by MP Lighting to be free from defects in materials and workmanship under normal use subject to the following terms and conditions:
CONDITIONS1. parts & Labor: One year from date of original purchase from distributor for low voltage and line voltage systems. Five years from date of original purchase from distributor for LED products.
2. Limitation: MP Lighting systems are approved to CSA, CE & UL standards when used as a complete system. Substituting another manufacture’s product will void all approvals and will remove MP Lighting from any liability. Malfunction and damage to product due to improper installation or misuse will not be covered under warranty.
3. receipt of goods: All products are 100% end of the line tested and inspected before shipping to customers. It is the responsibility of the consignee receiving the goods to inspect the goods to ensure accuracy of order and to check for any damages that could have occurred from shipping. Claims for missing parts must be made within 5 business days from receipt of goods. Claims for missing parts after 5 days will not be accepted. Damage to product due to shipping should be claimed immediately with freight carrier. MP Lighting is not responsible for product damaged in transit by freight carrier.
4. proof of purchase: This warranty applies to the product from original date of purchase from distributor. The customer must furnish proof of original invoice, packing slip or payment.
5. disclaimer or Consequential damage: This warranty covers only the product itself; we assume no liability for labor costs, installation costs, improper fixture selections or other losses.
Product returned for Warranty inspection must be given an RGA (Return Goods Authorization) from MP Lighting. Products must be returned freight prepaid with the RGA number clearly marked on the outside of the box. Upon confirmation of a defect or failure, at our discretion, we will repair or replace the item. If product is deemed to be in good working condition or if any of the above mentioned conditions are not met, the product will be returned and no warranty will be given. RGA numbers may be obtained by fax request at 604-708-1185 Attention: Customer Service, or by email request at [email protected].
MP LIGHTING PRODUCT CATALOGUE
98 MP LIGHTING PRODUCT CATALOGUE
noTes
16 WEST 4TH AVENUEVANCOUVER BC V5Y 1G3
t 604 708 1184f 604 708 1185
THE GALLERY 1 NEWBURY STREET KINTBURY, BERKSHIRE RG17 9UX
Nicholas [email protected]
t +44(0)1488 657900
North America (Head Office)United Kingdom/Western Europe