8/12/2019 MD1-0-V-121-01-00001

1/2

APPROVED

Approved without exception

APPROVED WITH COMMENTS

Approved Subject to Incorporation of comm

RETURNED FOR CORRECTION

Insufficient Information/ Detail

Resubmit for Approval

REJECTED

Complete redesign required

RECEIVED FOR INFORMATION

Returned without comments

RECEIVED FOR INFORMATION

Returned with comments

any obligations covered under contra

Engineer:

Discipline:

Date:

Note: Approval or comments does not relie

TWO(2) X 500MW

MONG DUONG 1 THERMAL POWER PLANT

avi anghorneSenior Mec Engineer07-Dec-12

8/12/2019 MD1-0-V-121-01-00001

2/2

Pyry CommentTwo(2) x 500MW Mong Duong 1 Thermal Power Plant Project

Dwg. / Doc. TitleG A Drawing BFP andBooster Pump Dwg. / Doc. No. MD1-0-V-121-01-00001

HDEC DT No. MD1-HDH-EVN-X-1219 Submitted Date Rev. A

PyryTR No. Received DateNew HDEC DT No. Re-Submitted Date

Status Submitted for Information Returned with Comment

Page 1/ 1

No. Pyrys Comments Contractors Reply / Action

1 Please provide KKS identifying number forequipment and instruments on the drawings.

2 Include a parts list for the major components(e.g. main pump, variable speed drive etc) withreference drawings.

3 Foundation drawings with loading data andanchor bolt information to be provided. Thesedrawings shall be identified as referencedrawings.

4 Confirm that there is personnel protection for allrotating components.

5 State what DBSE means

6 Identify the equipment on the edge of the

booster and main pump base plates at gridreference A2, A3, C5 and C6.