![Page 1: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/1.jpg)
KTM 790 DUKEMODEL 2017+
TAIL TIDYInstallation Instructions
![Page 2: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/2.jpg)
Installation Instructions
![Page 3: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/3.jpg)
Installation Instructions
Tools needed* Tools, recommended by our mechanics; propper installation can also be carried out with different tools.
![Page 4: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/4.jpg)
Installation Instructions 1
1. Lock up and open seat.Disconnect light and turn-light cables.
![Page 5: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/5.jpg)
Installation Instructions 2
Unscrew 4 bolts which hold the stock Tail Tidy. Remove old Tail Tidy.
![Page 6: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/6.jpg)
Installation Instructions 3
2. Remove 3 bolts from Tail Tidy.Remove 4 bolts from plate to take it apart.
1. Remove the reector and save for later. .
![Page 7: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/7.jpg)
Installation Instructions 3.1
.
1. Disconnect the wiring (all 3 parts).
2. Remove the bolt which holds
the turn signal light.
3. Remove the turn signals.
Save bolts and washers for later.
Repeat on other side.
![Page 8: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/8.jpg)
Installation Instructions 4
1. Put part on turn signal lightOnly right side: add part (heat protector) on wiring.
Add stock bolts and washers back with help of tool (fully tighten)
Repeat on other side.
![Page 9: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/9.jpg)
Installation Instructions 4.1
1. Put part on turn light signals.
2. Add bolt and washer onto wiring and tighten a bit.
3. Assemble the unit. Repeat with the bolts. Make sure not to tighten both parts too tight in order to be
able to assemble it.
Fully tighten the bolts.
![Page 10: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/10.jpg)
Installation Instructions 4.2
1. Fully tighten 2 bolts.
![Page 11: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/11.jpg)
Installation Instructions 4.3
Put part C on wiring and tighten bolts.
![Page 12: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/12.jpg)
Installation Instructions 5
2. Fit part ( ) onto bottom 2 bolt holes and fully tighten all bolts.
1. Fit component onto bike - wiring first.Tighten (not fully) upper 2 bolts. 3. Slide up plate cover ().
![Page 13: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/13.jpg)
Installation Instructions 6
1. Attach (if wished) the plate plastic.
2. Fit reector to part ........3. Add bolts and rubber washers.
4. Fit reector to bottom of plastic (use a power tool to drill a hole) Add bolts.
5. Fully tighten.
![Page 14: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/14.jpg)
Installation Instructions 6.1
1. Connect wiring.2. Put back seat.
![Page 15: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/15.jpg)
IMPORTANT
After installation of your tail tidy ensure that the license plate does not contact the rear tyre when suspension is fully compressed.
It is recommended that periodic inspections are made toensure that all bolts are tightend.
Should the bike be involved in an accident a thorough inspectionshould be made and any components that have taken an
impact, no matter how small, be replaced.
The manufacturer or supplier cannot be held responsible for products that are incorrectly mounted or inappropriately used.
It is recommended to check all connections regularly for tightness of fit.
Ensure all electrics including indicators, tail light, brake light and licence plate light lights are working correctly before riding the motorcycle.
![Page 16: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/16.jpg)
![Page 17: KTM 790 DUKE - Bagoros Performance · 2021. 1. 11. · KTM 790 DUKE MODEL 2017+ TAIL TIDY ... Make sure not to tighten both parts too tight in order to be able to assemble it. Fully](https://reader035.vdocuments.site/reader035/viewer/2022071414/610e353f18532e4d99455b82/html5/thumbnails/17.jpg)
BAGOROSPERFORMANCE.COM